project: logical game page 1 of 14 logical game · project: logical game page 1 of 14 logical game...
TRANSCRIPT
Project: Logical Game Page 1 of 14
LOGICAL GAME
This is the project for making a very interesting logical game, and it requires just a little of your time. There are many combinations for arranging this assembly during the game. You can use various types of wood (ash, birch, cherry, maple, oak, walnut, ebony, mahogany, etc.), but it is recommended to use some good quality, harder wood with nice textures (for example: walnut or cherry). The first thing you should do is to build a basic assembly, into which you will arrange the other parts. The basic assembly consists of three boards, joined together with pins. When joining the boards, the first step is to put a few drops of wood glue into the holes, and then just place the pins in. Be careful with dosage of glue. You need 9 pins. Note: The quotation measurements in brackets are given in inches, and measurements without brackets are in millimeters.
Project from www.craftsmanspace.com
Project: Logical Game Page 2 of 14
Basic Assembly
Project from www.craftsmanspace.com
Project: Logical Game Page 5 of 14
Assemble instructions:
Project from www.craftsmanspace.com
Project: Logical Game Page 6 of 14
The arranging assemblages consist of the following parts: - Part 1
- Part 2
Project from www.craftsmanspace.com
Project: Logical Game Page 7 of 14 Form the assemblages by joining together these parts with glue:
Project from www.craftsmanspace.com
Project: Logical Game Page 12 of 14 Make 12 pieces of every assembly. For that you will need: - 96 pieces of Part 1, and - 36 pieces od Part 2. And then the fun begins! On the pictures you can see just a few arranging examples. You can find your own ways of arranging the assembly or invent your own shapes.
Project from www.craftsmanspace.com
