Programming the CD101

Push and hold the SET button for 3 seconds

AL1 will appear. Keep pressing the SET button until you see LCK

The default value of LCK will be 1000. We need to change this value to unlock the thermocouple settings.

Change the value of LCK to 1100. You can use the < key to change the cursor position. Press

SET again until you have exited the menu.

(back to the normal operation screen)

Push and hold SET and < together

Set the value of Cod to 0000

Change the value of SL1 to 1100 for the pt100 thermocouple

Press and hold SET and < to return to normal operation

Normal operation

Push and hold the SET button for 3 seconds

Keep pressing SET until you see LCK. Set the value to 1000. Press and hold SET to exit the

menu.

Normal operation

Setting the desired temperature

Press and release the SET button. The orange numbers on the SV row will flicker. Use the ˄ and ˅ buttons to change the value.

Use the < button to change decimal places. Press SET to confirm.

For additional programming details, see

this manual for the CD101 controller

.

For other PID controllers, consult your users manual.