product seminar
DESCRIPTION
hi just gothrough the presentation of our company productsTRANSCRIPT
WELCOME TO
SEMINAR ONJK
PRODUCTS
JK White Cement Product Portfolio
Your Smile.. Our Satisfaction
J K WHITE CEMENT
Gotan , Rajasthan
The Organization “JK White Cement Works “ Started the Production Of White
Cement in 1984 at GOTAN (Rajasthan) using the DRY PROCESS technology in Technical Expertise from F.L. Smidth & Company – Denmark
• Production Capacity of 3,00,000 MT of White Cement Per Annum
• ISO – 9001:2000 and 14001 Certified Company by LRQA• OHSAS 18001: 2005 For safety and environmental upkeep• Quality control by FUZZY Logic & QCX which control the
RMP( Raw Mill Proportionate) for the consistency of White Cement
• Innovator for new technology and energy conservation • The Factory is Situated at Gotan (Raj.) having one of the Best
known source of Chemically Pure High Grade Lime stone which is a key ingredient of White Cement ( reserves for next 50 years)
JK White Cement
Your Smile.. Our Satisfaction
PRODUCTION CHART
JK White CementUsage Flooring with White cement
Walls with White cement
Plastering
Decorative/Utility
Architectural
Your Smile.. Our Satisfaction
Flooring with ..JK White Cement(Under bed for marble) Your Smile..
Our Satisfaction
Marble Being Translucent will reflect part of the background. Hence a white base will Enhance the whiteness of the Marble which Can Be Achieved using JK White Cement
Flooring with ..JK White Cement(Mosaic/In Situ/Pavers) Your Smile..
Our Satisfaction
Mosaic Tles• Different Colors• Designs• Durability ,dense• Water tight• Hard wearing surface• Made & fixed with white cement
Terrazo Flooring • In-Situ Terrazzo • Wide variety of patterns• Various color schemes using the white
cement with pigmentsPavement Blocks Used for road markings, pavements ,
parking lots, foot path & any landscaping Application
Your Smile.. Our Satisfaction
Walls with .. JK White Cement( Cement Wash and Designer Wall Tiles )
White Washing with JK White Cement
White wash with white cement gives more life as it is an integral part of the wall
Does not stain clothes. Superior results obtained by
applying Putty
Designer Wall tiles in JK White Cement
Made using white cement Designs of your choice and
imagination
Cement paints are material consisting of White Portland cement and other ingredients like lime, pigments, Hygroscopic salts, water repellants, fungicides, etc (>65% White Cement)
Cement Paints have better performance than distemper paints for out door protection and decoration of building as long as they are manufactured as per BIS Standards
Absence of organic binding materials and the fungi static action of cement paint were considered important hence incorporated.
Cement Paint Uses • White cement is widely used for
decorative water-proof cement paint• For interiors and exteriors• Superior results with putty
Your Smile.. Our Satisfaction
IS SpecificationsIS: 5410:1992Reaffirmed -1999
Composition: As per ISWhite Portland cement : 65% (min) Hydrated lime : 25% (max) Pigments and other materials : Depends on
properties (i.e. Alkali resistant, Water repellants, Hygroscopic salts and Fungicides )
Application Substrate:Porous surfaces like Masonry Concrete, Rough plaster except gypsum plaster
Walls with ..JK White Cement( Cement Paint )
Your Smile.. Our Satisfaction
Plaster with .. JK White Cement
Sand Face Spray Plaster
For interiors & exteriors Applied with manual or pneumatic machine No primer Required Permanent Finish /Low Maintenance
Expose Aggregiate Plaster
Cement & colored aggregates Aggregates when exposed from plasters Gives an attractive natural look Stone or flint aggregates can be white or colored
or a mixture, to suit design No primer Required Permanent Finish/Low Maintenance
Textured Plaster Textured coating applied on exterior for decoration & protection. Texture is made by chiseling.( Malad Stone) Variety of colors with pigment addition to white cement
Plain Plaster Plain plaster without any texture. Variety of colors with pigment addition to white cement. Plastering is done on grey cement plaster surface which is made
rough by combing
Roller Finished Plaster Special textured rollers are used to give textured & uniform
pattern. Immense design variation possibilities. Variety of colors with pigment addition to white cement.
Your Smile.. Our Satisfaction
Plaster with ..JK White Cement
Sponge Finished Plaster• Sponge is used to obtain a special pattern
on surface• Sponge patterns varies with applied
pressure and hardness of sponge• Various colors with pigment addition• Popular for ceiling jobs
Your Smile.. Our Satisfaction
Plaster with ..JK White Cement
Your Smile.. Our Satisfaction
Decorative/Utility Uses with.. JK White Cement
China Mosaic• Broken pieces of glazed tiles are fixed with in desired pattern• Applied on terrace, parapet walls, swimming pools• Water repellency is served Italia Mosaic• Used on exteriors walls of building for decoration & protection• Also on columns & floors• Glass pieces fixed with white cement Area Markers/Road Dividers/Zebra Crossings• White color of cement Make it a long term solution for Road Divider (
outer layer).• Zebra crossing layed with white cement & other area markers for
parking can give permanent service Pointing On Brick Work /Stone Work• Pointing means filling of joints between bricks/stones with white
cement & colored cement mortar• Imparts beauty as well as protection
Architectural With..JK White Cement
Ornamental Articles
• Notable application is in the moulding of sculptures or ornamental motifs.
PreCast Panels GRC( Glass Reinforced Cement)
• New Technology Ready to use panels of any design
• White or colored panels with different designs and patterns joined together at site to speed up construction
• Equipment is needed to handle and place the panels
• Panels of any size and can be smooth or textured as desired.
• Pillars , Jhalis ,Stone finishes , etc available at a lower cost and in your desired Colour
• Made to order /Tailor made to suit your requirement
Your Smile.. Our Satisfaction
JK White Wall Putty
Your Smile.. Our Satisfaction
TYPES OF WALL PUTTY JK HAS
JK WALL PUTTY (FINE)
JK WALL PUTTY ( COARSE)
JK Wall Putty ( Skim Coats)
For luxurious and silky interior/exterior finish
Good adhesion with Plastered wall ( Cement to Cement Adhesion)
No primer No Flaking and long life Better glaze & lower consumption of paint
compared to traditional putties
Your Smile.. Our Satisfaction
JK Wall Putty (FINE)
Why JK Wall Putty?
White Cement Based
Proper Adhesion to Plaster
Becomes Integral Part of Plaster
Very High Durability and Life
Imparts additional Strength and prevents Flaking in case of seepage
Can be used for Internal as well as external Surfaces
Your Smile.. Our Satisfaction
Advantages Over Traditional Putty (POP)
Advantages over Plaster of Paris (POP)
1. White cement based product therefore strength is more than gypsum based POP.
2. J.K. Wall Putty can be applied on exteriors/exposed surfaces whereas the same is not possible with POP.
3. J.K. Wall Putty is very white in appearance while POP is yellowish.
4. In case of J.K. Wall Putty no primer is required before painting, whereas it is compulsory for POP surfaces.
5. J.K. Wall Putty resists seepage while POP does not.
Properties Transverse Strength - 1.7 Kg/cm2
Compressive Strength - 37 Kg/cm2 ( 28 days) Whiteness Index - 93% (28 days)
Pot life - 180 Minutes Water demand by volume - 35 to 40 %
Surface hardness - 3.0 N
Maximum thickness of total - 1.5- 2.5 mm coats
Coverage - 15 Sq Feet/Kg in 2 coats*
Subject to wall condition /Roughness and usage
Your Smile.. Our Satisfaction
JK COARSE PUTTY USED IN UNDULATED SURFACE THICKNESS – 4
MM MINIMUM MICRO SAND INCLUDED IN THIS PUTTY SPECIAL PRODUCT AVAILABLE IN 20 KG BAGS. FINAL FINISH WITH FINE PUTTY ONLY. WIDELY USED IN TEXTURE FINISHES IN
ELEVATIONS. CAN GO UPTO 8MM THICKNESS IN 2 COATS.
JK WALL PUTTY..Surface Preparation Your Smile..
Our Satisfaction
Surface Preparation
The surface should be cleaned to make it free from dirt, dust, grease, oil and paint. All foreign impurities should be removed with a wire-brush. Wall surfaces should be cured so that the surface is saturated with water yet in ‘touch dry’ condition.
Treatment of New Surface
The new surface requires only soft treatment such as removal of dust, dirt and foreign matter. In case of cracks, voids and damages; it should be patched up prior to application of J. K. Wall Putty with grey/white cement.
Treatment of Old Surface
All loose material and/ or organic growth must be removed with Putty blade or brush. In case of old painted surface scrub the surface with coarse emery stone/paper.
JK WALL PUTTY.. Application Your Smile..
Our Satisfaction
Preparation of J.K. Wall Putty Paste
J. K. Wall Putty is a fine powder. Mix slowly J. K. Wall Putty with approx. 40% water by volume to prepare paste of desired consistency. Mix vigorously for 5-10 minutes for making lump free, uniform and smooth putty paste. Product should be mixed in required quantities to be used within 2-3 hrs of its preparation.
Application
Apply uniformly the first coat of J.K. Wall Putty with blade/trowel on the wall from bottom to top. Apply second coat after the first coat has dried completely(Min 6 hrs). Limit the total thickness of 2 coats to 2.5 mm. Allow complete drying and then use fine emery paper to remove the application mark if any. Any kind of paint can be applied on this surface. Use water for curing before applying paint.
Precaution
Although J.K. Wall Putty does not contain any toxic material, use rubber gloves while mixing, as prolonged exposure with water may soften the skin resulting in fine cuts/legions due to cement particles. Precaution should be taken to avoid dust inhalation while handling the powder putty.
Storage
Store J.K. Wall Putty in a dry place and open the pack just before use. Keep out of reach of children.
The Authentication…
NCCBM Certification
Third Party Certification
Your Smile.. Our Satisfaction
Satisfied Clients ..INDIA Textile Mills
Nuclear Power Project -Kudankulam
Delhi Metro
Reliance
IIT Kanpur
PWD
JUSCO
IJM Hyderabad
Mahindra Gesco
Pharma Industry
Uttar Pradesh State Building Corporation
Unitech
Marathon
Merlin
Shipra
…………………
Your Smile.. Our Satisfaction
JAIN HOUSINGProject
Sunder bans
Area-52 Lacs Sqft
Chennai
Recent Projects
L&TPROJECT-COGNIZANT MEPZ
AREA-25LACS SQFT
ARCHITECT- Mr.Karthikeyan & Nagalingam.
CONTRACOR-OVIYAS
LOCATION-TAMBARAM
SANITORIUM, CHENNAI
CEEBROS PROPERTIES&DEVELOPMENT
PROJECT-CEEBROS HOTELS
Area-10 LACS Sqft
NANDANAM, CHENNAI
SOUTH INDIAN SHELTERS
PROJECT-SAFAA
AREA-7.50 LACS SQFT
CONTRACTOR-ABSOLUTE MKTGARCHITECT- Akbar Hussain Akbari
LOCATION-GUDUVANCHERY, OUTSKIRTS CHENNAI
SRM UNIVERSITY
AREA-10 LACS SQFT
LOCATION-VANDALORE, OUTSKIRTS CHENNAI
ARUNEXCELLOPROJECTECSTANCIA
AREA-50 LACS Sqft
CONTRACTORSROYAL DESIGNS&SAIRAM CORPORATION
ARCHITECT-NATRAJ&VENKAT
VELLANCHERRY, OUTSKIRTS CHENNAI
EMAAR
PROJECT-MGF EMAAR
AREA-7 LACS SQFT
CONTRACTOR-OVIYAS
ARCHITECT-CHAKRAPANIatTONDIARPET, CHENNAI
EXPRESS INFRASTRUCTUREEXPRESS AVENUEContractor - Mr. Phillip of IN-DECORS, Exteriorat MOUNT ROAD, CHENNAI
NAVINHOUSING,DAYTONHEIGHTSArea-6.5 Lac
sqft, Architect Mr.W.Anand, at Nelson
Manickam Road Chennai,
ContractorMr.Gandhi ofG-ENTERPRISES
Some Testimonials Your Smile.. Our Satisfaction
Putty Finishes Interiors Your Smile.. Our Satisfaction
Putty Finishes Exterior Your Smile.. Our Satisfaction
JK Water Proofing Compound
Your Smile.. Our Satisfaction
Your Smile.. Our Satisfaction
JK Water Proofing CompoundWhat Does it Do?
It is a water repellant powder that does not allow water to percolate through the Pores and voids which are prevalent in Normal cement mix caused by capillary action
Without WPCWith WPC
Your Smile.. Our Satisfaction
How does it Work?
J.K. Waterproof reacts with alkalis in the concrete forming a highly water-repelling compound in the capillaries and throughout the concrete or mortar. In this way, the surface tension, which would normally draw water into the capillaries and micro cracks does not take place and does not allow propagation of Moisture
Your Smile.. Our Satisfaction
BIS Standards
IS- 2645-2003 Strength to be >90% of Neat cement 3 Day
strength
Setting time –Reduction of setting time should not be >25% of Neat Cement
Water Permeability should be <50% of Neat Cement
Chloride test should be < 2% JK Water Proofing more than meets the BIS
Specifications and is IS Certified( IS 4410 ??)
Your Smile.. Our Satisfaction
Mixing Ratio
Mixed with cement in a ratio of 2% by weight ( 1kg for every 50 kg Bag)
Your Smile.. Our Satisfaction
Onsite Test For Effective Water Proofing Compound
Dispersion Test
Mercury Test
Match stick Test
Your Smile.. Our Satisfaction
Some Usages of JK Water Proofing Compound
J.K. Waterproof can be used for following construction activities: -
1.Under bed of foundation or entire raft foundation.
2. At Damp Proof Coarse (DPC) level.
3. Concrete Roads
4.All under-ground halls, basements or water storage tanks.
5. Swimming pools
6. Concreting and masonry work for toilets, bathrooms and kitchens.
7. The external plaster of the walls which falls across the normal rain direction of that area.
8.Construction in coastal areas.
9.Bridges and Fly overs.
And where you can think of…………….
THANK YOU..
Any Questions Please….