product overview - proaudio technology gmbh

PRODUCT OVERVIEWIndividual Components

5Warranty

Years

LF: 1 x 10” bass reflex HF: 1 x 1”, horn-loaded 1-channel passive operation, 16 ohms Directivity pattern 60 x 90 degrees or 90 x 60 degrees 35 degrees monitor corners 3+1™ SpeakON sockets (2-channel wiring without reversible cables) M10 sockets for MT10 flying brackets Stacking feet for horizontal operation Water-repellent acoustic foam behind the front grille Two ergonomically placed handles Weight 12.8 kg / 28.2 lbs Dimensions (H x W x D) 340 x 290 x 495 mm / 13.4” x 11.4” x 19.5” 5 years warranty Made & engineered in Germany

Suitable system accessories: CASE-M10 Case for two M10 speakers FB-MT10 Flying bracket for M10 / MT10 AD-FB Mounting adapter for flying bracket TRIGGER-CLP Trigger clamp, SWL 200 kg (440 lbs)

Matching system components: All subwoofer of the SW and VS series 10.4-DSP / 20.4-DSP system rack

LF: 2 x 10” bass reflex HF: 1 x 1,4”, horn-loaded 35 degrees monitor corners 3+1™ SpeakON sockets (2-channel wiring without reversible cable) Stacking feet for horizontal operation Water-repellent acoustic foam behind the front grille Two ergonomically placed handles Weight 25 kg / 55 lbs Dimensions (H x W x D) 391 x 580 x 540 mm / 15.6” x 22.8” x 21.3” 5 years warranty Made & engineered in Germany

Suitable system accessories: CASE-M20-2 Case for two M20 speakers, with accessory compartment FB-M20 Flying bracket M20 AD-FB Mounting adapter for flying bracket TRIGGER-CLP Trigger clamp, SWL 200 kg (440 lbs)


L O U D S P E A K E R S

M10 Monitor speaker M20 Monitor speaker

LF: 1 x 10” bass reflex HF: 1 x 1”, horn-loaded 1-channel passive operation, 16 ohms Directivity pattern 90 x 60 degrees or 60 x 90 degrees 45 degree monitor angles Left and right version 3+1™ SpeakON sockets (2-channel wiring without reversible cable) Integrated flying rails and M10 suspension points Stacking feet for upright and horizontal operation Acoustic foam behind the front grille Two ergonomically placed handles Weight 12 kg / 26.5 lbs Dimensions (H x W x D) 485 x 290 x 267 mm / 19.1” x 11.4” x 10.5” 5 years warranty Made & engineered in Germany

Suitable system accessories: BAG-MT10-1 Carrying bag for MT10 CASE-MT10-4F Case for four MT10 loudspeakers with accessories

compartment FB-MT10 Flying bracket for M10 / MT10 FB-MT10-H Flying bracket for MT10 horizontal GS-MT10 Ground stand for MT10 horizontal AD-FB Mounting adapter for flying bracket TRIGGER-CLP Trigger clamp, SWL 200 kg (440 lbs)


LF: 1 x 12” bass reflex HF: 1 x 1.4”, horn-loaded 1-channel passive operation, 8 ohms Directivity pattern (h x v) 80 x 60 degrees 45 degree monitor angles Left and right version 3+1™ SpeakON sockets (2-channel wiring without reversible cable) Integrated flying rails and M10 suspension points Stacking feet for upright and horizontal operation Acoustic foam behind the front grille Two ergonomically placed handles Weight 21 kg / 46.3 lbs Dimensions (H x W x D) 585 x 380 x 330 mm / 23” x 15” x 13” 5 years warranty Made & engineered in Germany

Suitable system accessories: BAG-MT12 Carrying bag for MT12 CASE-MT12 Case for two MT12 loudspeakers with accessories compartment FB-MT12 Flying bracket for MT12 AD-FB Mounting adapter for flying bracket TRIGGER-CLP Trigger clamp, SWL 200 kg (440 lbs)


MT12 Multi-purpose LoudspeakerMT10 Multi-purpose Loudspeaker

5Warranty

Years

LF: 2 x 10” bass reflex HF: 1 x 1.4”, horn-loaded 1-channel passive operation, 8 ohms Radiation pattern (h x v) 80 x 60 degrees 3+1™ SpeakON sockets (2-channel wiring without reversible cable) Lateral flying rails all the way Stacking feet with corresponding sockets on the counterside Water-repellent acoustic foam behind the front grille Four ergonomically placed handles Weight 26 kg / 57.4 lbs. Dimensions (H x W x D) 780 x 380 x 350 mm / 30.7” x 15” x 13.8” 5 years warranty Made & engineered in Germany

Suitable system accessories: CASE-TX20-2 Case for two TX20 loudspeakers FB-TX20 Flying bracket for TX20 FLY-TX20 Flying rail for TX20 COV1-TX20 Protective cover for TX20 AD-FB Mounting adapter for flying bracket TRIGGER-CLP Trigger clamp, SWL 200 kg (440 lbs)


LF: 2 x 8” bass reflex, horn-loaded, symmetrical to HF driver HF: 1 x 1.4”, horn-loaded 1-channel passive operation, 8 ohms Usable above 80 Hz Directivity pattern 60 x 40 degrees or 90 x 40 degrees Max. SPL 140 dB Trouble-free continuous operation at high levels Full-length lateral flying rails and additional M10 suspension points Stacking feet with matching receptacles on the opposing side (stacking) Acoustic foam behind the front grille Ten ergonomically placed handles Weight 39 kg / 86 lbs Dimensions (H x W x D) 585 x 580 x 605/255 mm / 23” x 22.8” x 23.8”/10” Truck format in three dimensions 5 years warranty Made & engineered in Germany

Suitable system accessories: DOL1-SW18 Wheel dolly, clampable onto HT16 / SW18 front DOL2-HT16 Wheel dolly for two stacked HT16 COV1-HT16 Protective cover for one HT16 top in combination with DOL1-SW18 COV2-HT16 Protective cover for two stacked HT16 on DOL2-HT16 FB-HT16 Flying bracket for HT16 FLY-HT16 Flying rail for HT16 LINK-HT16 Connection rope for flying several HT16 in vertical arrays AD-FB Mounting adapter for flying bracket TRIGGER-CLP Trigger clamp, SWL 200 kg (440 lbs) SG-HT16 Strap with Aircargo-Doublestuds


TX20 Fullrange Loudspeaker HT16 Mid/High Frequency Loudspeaker


Omnidirectional and cardioid operation 2+2™ SpeakON sockets (front/rear system wiring) Usable from 38 Hz Max. SPL 126 dB Acoustically compatible with SW18 and SW28 (phase and frequency response) Stacking feet with sockets on counterside (upright or horizontal stacking) Sockets for MT10 and MT12 in all variants Acoustic foam behind the front grille Two ergonomically placed handles Weight 23 kg / 50.7 lbs Dimensions (H x W x D) 385 x 485 x 480 mm / 15.2” x 19.1” x 18.9” 5 years warranty Made & engineered in Germany

Suitable system accessories: DOL2-SW12 dolly for 2 x SW12 COV1-SW12 Protective cover for 1 x SW12 COV2-SW12 Protective cover for 2 x SW12 and DOL2-SW12 SB-SW12 Stacking board SW12 DSK Distance rod with hand crank and ringlock

Matching system components: All subwoofer of SW and VS series MT10, MT12 and TX20 tops VT8, VT16 and VT20 vertical array 10.4-DSP / 20.4-DSP system rack

Omnidirectional and cardioid operation 2+2™ SpeakON sockets (front/rear system wiring) Usable above 38 Hz Max. SPL 130 dB Stacking feet with matching receptacles on the opposing side (stacking) Acoustically, mechanically and visually compatible with SW28 subwoofer Acoustic foam behind the front grille Four ergonomically placed handles Weight 35 kg / 77.2 lbs Dimensions (H x W x D) 585 x 580 x 605 mm / 23” x 22.8” x 23.8” Truck format in three dimensions 5 years warranty Made & engineered in Germany

Suitable system accessories: DOL1-SW18 Wheel dolly, clampable onto HT16 / SW18 front DOL-SW18-VS15 Dolly for SW18 / VS15 stacked and SW28 upright DOL-SW1828 Dolly for 4 x SW18 or 2 x SW28 DOL-3SW18-4VS15 aluminium dolly for 3 x SW18 or 4 x VS15 COV1-SW18 Protective cover for SW18 with DOL1-SW18 COV2-SW18 Protective cover for two SW18 stacked on DOL2-SW18 COV-SW1828 Protective cover for combination with DOL-SW1828 DSK Distance rod with hand crank and ringlock

Matching system components: All subwoofer of SW and VS series MT10, MT12 and TX20 tops VT8, VT16 and VT20 vertical array 10.4-DSP / 20.4-DSP system rack

SW18 1 x 18” Bassreflex SubwooferSW12 1 x 12” Bassreflex Subwoofer

5Warranty

Years

Omnidirectional and cardioid operation 2+2™ SpeakON sockets (front/rear system wiring) Usable above 36 Hz Max. SPL 136 dB Stacking feet with matching receptacles on the opposing side (stacking) Acoustically, mechanically and visually compatible with SW18 subwoofer Acoustic foam behind the front grille Eight ergonomically placed handles Weight 70 kg / 154.3 lbs Dimensions (H x W x D) 585 x 1165 x 605 mm / 23” x 45.9” x 23.8” Truck format in three dimensions 5 years warranty Made & engineered in Germany

Suitable system accessories: LID-SW28 Front lid, clampable onto SW28 front DOL2-SW28 Alu dolly for stacked SW28, prepared for tool-free levelling

outriggers DOL-SW18-VS15 dolly for SW18 / VS15 stacked and SW28 upright COV1-SW28 Protective cover for SW28 with wheels on rear side COV-SW1828 Protective cover for combination with DOL-SW1828 DSK Distance pole with winder OUTR4 Tool-free levelling outrigger for DOL2-SW28

Matching system components: SW18 Subwoofer 10.4-DSP / 20.4-DSP System rack

SW28 2 x 18” Bassreflex Subwoofer


VS18 stacked VS18F flown: Fully integrated flying system

without protruding and losable parts Omnidirectional and cardioid operation (stacked and flown) 2+2™ SpeakON sockets (front/rear system wiring) Useable from 27 Hz Max. SPL 130 dB Stacking feet with sockets on the opposite side Acoustically, mechanically and visually compatible with the VS28 subwoofer Acoustic foam behind the front grille Four ergonomically placed handles Weight 46 kg / 101.5 lbs (VS18F 48 kg / 105,8 lbs) Dimensions (H x W x D) 500 x 700 x 780 mm / 19.7” x 27.6” x 30.7” Truck size with protective sleeve 5 years warranty Made & engineered in Germany

Omnidirectional and cardioid operation 2+2™ SpeakON sockets (front/rear system wiring) Useable from 27 Hz Max. SPL 136 dB Stacking feet with sockets on the opposite side Acoustically, mechanically and visually compatible with the VS18 subwoofer Acoustic foam behind the front grille Eight ergonomically placed handles Weight 88 kg / 194.3 lbs Dimensions (H x W x D) 996 x 700 x 780 mm / 39.2” x 27.6” x 30.7” Truck size with protective sleeve 5 years warranty Made & engineered in Germany

Suitable system accessories for VS18 and VS28: DOL-VS1828 transport dolly for 3 x VS18 or 1 x VS28 Subwoofer DOL-3VS18 aluminium dolly for 3 x VS18 Subwoofer COV2-VS18 Protective cover for 2 x VS18 bzw. 1 x VS28 and DOL-VS1828 COV3-VS18 Protective cover for 3 x VS18 Subwoofer and DOL-VS1828 DSK Distance rod with hand crank and ringlock

Matching system components: All subwoofer of SW and VS series VT8, VT16 and VT20 vertical array 10.4-DSP / 20.4-DSP system rack

VS18 1 x 18” Subwoofer VS28 2 x 18” Groundstack Subwoofer

5Warranty

Years

LF: 2 x 10” bass reflex, horn-loaded, symmetrical to HF driver HF: 1 x 11.5” line source, horn-loaded Power handling capacity (RMS / programm): 800 W / 1,600 W Max. SPL 140 dB Frequency response: 50 Hz / 90 Hz / GV up to 18 kHz Linear acoustic phase response up to 20 kHz, LP technology Directivity pattern: 90 degrees horizontal Impedance: 1 x 8 ohms 2+1™ SpeakON sockets (2-channel wiring without reversible cable) Integrated 3-point flying hardware for angles between 0 and 8 degrees Weight: 35 kg/ 77.2 lbs Dimensions (W x H x D): 700 x 325 x 560 mm, 600 mm on dolly /

27.5” x 12.8” x 22”, 23.6” on dolly Four ergonomically placed handles Water-repellent acoustic foam behind the front grille 5 years warranty Made & engineered in Germany

Accessories: DOL-VT20 Transport dolly for VT20 FRAME09-VT20 Flying frame for up to 9 VT20 or 6 VS18F FRAME24-VT20 Flying frame for up to 24 VT20 or 16 VS18F CASE-FR09-FR24-2 Case for 2 x FRAME09-VT20 or 2 x FRAME24-VT20 COV3-VT20 Protective cover for 3 x VT20 and DOL-VT20 COV4-VT20 Protective cover for 4x VT20 and DOL-VT20 DM-WM-Set Angle measurement instrument set VT-Trimset Trim set for VT8, VT16 and VT20

Matching system components: VS18, VSF and VS28 subwoofer 10.4-DSP / 20.4-DSP system rack

n Three VT20s in transport dolly n Three VT20s plus three VS18Fs cardioid with flying frame as stack

VT20 Line-Array


n Sound level distribution at ear level (top view of the 35 m x 70 m listening area)

VT20: Acoustical 3-D Simulation

To optimally tune the VT20 System to the respective acoustical requirements, high-res 3-D simulation data are available for the worldwide acknowledged Ease Focus simulation software.

With it even complex PA situations, both in flying and stacking operation, can be conveniently and precisely simulated in the 3-D space. The simulation will help you to accurately determine the curving, the flying points, the angulation, levels and other parameters.

The diagram “Sound level distribution at ear level“ above shows a VT20 stereo system with two arrays of 12 tops each which has been optimised for a listening area of 35 m x 70 m. This simulation illustrates how evenly the VT20 System will cover a depth of 70 m.

This exemplary simulation shows that, due to its uncompromising design, the VT20 system is very well suited for large sound reinforcement applications.

5Warranty

YearsL O U D S P E A K E R S

Accessories:

n DOL-VT16 transport dolly for VT16 and FRAME16-VT16 n FRAME16-VT16 flying frame for max. 16 x VT16

or 9 x VS15

n COV4-VT16 Protective cover for four VT16 in a dolly

n DM-WM-Set Angle measurement instrument set

n VT-Trimset Trim set for VT8, VT16 and VT20

Matching system components:

n VS18, VSF and VS28 subwoofer

n 10.4-DSP / 20.4-DSP system rack

VT16 Line-Array

n LF: 2 x 8” bassreflex, symmetrically aligned around the HF driver

n HF: 1 x 1.4” horn-loaded driver on waveguide

n Power handling (RMS / programme): 500 W / 1,000 W

n Max. SPL: 133 dB

n Frequency response: 50-18,500 Hz

n Impedance: 1 x 12 ohms

n Linear acoustic phase response between 80 Hz and 18 kHz

n Integrated 3-point flying equipment for angles between 0° and 8° in

1-degree steps

n Water-repellent acoustic foam behind the front grille

n Four ergonomic handles n Weight: 21 kg [46.4 lbs]

n Dimensions (W x H x D): 580 x 245 x 440 mm [22.8 x 9.6 x 17.3 in.]

n 5 years warranty n Made & engineered in Germany

n Two VT16 plus two SW18 with flying frame as stack

n Two VT16 with flying frame

Efficiency redefined

Twelve VT16 tops and eight 18“ subwoofers (SW18 and VS18) only require a single system amplifier weighing in at 12 kg [26.5 lbs.] and one 230 V Schuko plug.

Weight and transport

With a weight of 21 kg [46.4 lbs] per item, eleven VT16 tops including flying frame can be flown on a 250 kg [552 lbs.] motor chain hoist.

In one dolly with a 60 cm [2 ft.] loading gauge up to six VT16 can be transported safely in a space-saving way and moved around by one person.

A lesser demand for amplifiers, XLR, speaker and power cables by 50 to 66 % will result in lower transport weight and system costs.

Even larger systems of e. g. 24 VT16 tops and 16 SW18 subs with amps and accessories can be transported in a typical 3.5-ton van by staff members without a truck driver’s licence. This brings about a considerable reduction of logistics costs per gig, which has an extra positive effect over the years.

5Warranty

YearsL O U D S P E A K E R S

n LF: 1 x 8” long excursion bassreflex

n HF: 1 x 1.4” horn-loaded driver on waveguide

n Power handling (RMS / programme): 250 W / 5000 W

n Max. SPL: 128 dB

n Frequency response: 50-18,500 Hz (system amplifier setup VT8-FR)

n Impedance: 1 x 16 ohms

n Horizontal coverage: 90 degrees

n Linear acoustic phase response between 100 Hz and 18 kHz

n Integrated 3-point flying equipment for angles between 0° and 8° in 1-degree steps

n Water-repellent acoustic foam behind the front grille

n Four ergonomic handles n Weight: 16 kg [35.3 lbs]

n Dimensions (W x H x D): 430 x 245 x 440 mm [22.8 x 9.6 x 17.3 in.]

n 5 years warranty n Made & engineered in Germany

VT8 Line-Array

Accessories:

n DOL-VT8 transport dolly for VT8 and FRAME16-VT8 n FRAME16-VT8 flying frame for up to 16 x VT8 n SP-VT8 Stacking plate for up to six VT8

n AD-SP: Mounting adapter for stacking plate VT8

n COV6-VT8: Protective cover for 6 x VT8 and DOL-VT8

n COV8-VT8: Protective cover for 8 x VT8 and DOL-VT8

n DM-WM-Set Angle measurement instrument set

n VT-Trimset Trim set for VT8, VT16 and VT20


n VS18, VSF and VS28 subwoofer


Accessories:

n DOL-SW18-VS15 transport dolly for VS15 stacked n COV2-VS15 Protective cover for two VS15 stacked

n COV3-VS15 Protective cover for three VS15 stacked

n FRAME16-VT16 flying frame for max. 16 x VT16

or 9 x VS15


n VT8, VT16, VT20 vertical array


VS15 Subwoofer

VS15 stacked VS15F flown: Fully integrated flying system

without protruding and losable parts Omnidirectional and cardioid operation (stacked and flown) 2+2™ SpeakON sockets (front/rear system wiring) Useable from 36 Hz Max. SPL 129 dB Stacking feet with sockets on the opposite side Acoustic foam behind the front grille Two ergonomically placed handles Weight 31 kg / 68,3 lbs (VS18F 33 kg / 72,8 lbs) Dimensions (H x W x D) 430 x 580 x 605 mm / 16,9” x 22.8” x 23.8” 5 years warranty Made & engineered in Germany

20.4-DSP6.2-DSP 8.4-DSP

A M P L I F I E R S & S Y S T E M R A C K S

2 inputs and 2 outputs 0.2 ms basic latency with active DSP

from input to output 2 x 850 W into 8 ohms, 2 x 1,700 W

into 4 ohms, 2 x 3,400 W into 2 ohms Mains input 180 – 265 VAC

(operational beyond 70 VAC) 10 A AC mains fusing 2 RU housing, 29 cm deep Weight 10 kg / 22 lbs 5 years warranty Made & engineered in Germany

2-channel system amplifier

Rack and PatchbaySystem Amplifier, Controlling and Cabling


from input to output 4 x 4,400 W into 4 ohms

8,000 W into 2 ohms Up to 80 % efficiency Mains input 180 – 265 VAC

(operational beyond 70 VAC) 16 A AC mains fusing 2 RU housing, 29 cm deep Weight 12 kg / 26.4 lbs 5 years warranty Made & engineered in Germany


from input to output 2 x 5,000 W into 2 ohms plus

2 x 2,500 W into 4 ohms Up to 80 % efficiency Mains input 180 – 265 VAC


4-channel system amplifier 4-channel system amplifier

10.4-DSP


from input to output 4 x 2,800 W into 4 ohms

5,300 W into 2 ohms Up to 80 % efficiency Mains input 180 – 265 VAC


4-channel system amplifier

S O F T W A R E

The system amplifiers are programmed conveniently in a

project-related manner with the Konfigurator2 software

which runs under Windows and Macintosh.

Within a project the speaker blocks are pulled via drag &

drop onto the channels of a memory location, the signal

distributed in the DSP over eight 4x4 mix blocks and the

corresponding filters selected. The 300 DSP memory

locations of the system amplifiers allow to save all required

configurations, recall them accordingly and, when needed,

remote-control them in online mode.

Konfigurator 2 ™ Configuration of the System Amplifiers

Konfigurator2: extremely flexible channel and memory allocation

Konfigurator2: extremely powerful show mode with mute groups

ProAudio Technology GmbHGruenstrasse 1379232 HugstettenTel.: +49 (0) 76 65 / 94 23 23 - [email protected]

19-03 EN

product overview - proaudio technology gmbh

Documents