product overview - gryphonoilfield.com · and services. we specialize in aggressive well...

Product Overview

Last date of Revision: 07-07-2018

Gryphon Oilfield Solutions is a worldwide provider of quality, value driven, oilfield products and services. We specialize in aggressive well completions tools, casing equipment and oilfield services and an expertise in conventional and unconventional down-hole technology development. Our main objective is to improve efficiencies and optimize recovery of hydrocarbons in the oil and gas industry. At Gryphon, we place a strong focus on meeting the individual needs of our customers with customized technical solutions. Headquartered in Houston, TX, the Gryphon Oilfield Solutions team is focused on fulfilling our corporate mission of ensuring exceptional value for our customers through superior operations, innovative solutions and complete team commitment.

Table of Contents

Echo Series of Products ……………….…………..……..………….…………………………..……………….…………………….…. 04

Echo DC Multistage Fracturing System ………….………………………...……………………………………………..… 05

Echo DC Cement Wiper Plug …..……….………………………...……..………………………………………………….…… 06

Echo Dissolvable Fracturing Plugs …..……….………………………...……..……………………………………..…..…… 07

TRIDENT Series™ of Products …….…………..……………..……………………….....…………………………………………..… 08

TRIDENT SC Composite Fracturing Plug …………………………………..………….....…………………….……….…. 09

TRIDENT Hybrid Composite Fracturing Plug …………………………..……………………………………..…….…... 10

TRIDENT Total Composite Fracturing Plug …………………………..……………..……..………………...………..…. 11

TRIDENT X Composite Fracturing Plug …………………………..……………..……………………………….…..…….. 12

SUREstack™ Series of Products …….…………………...………………………….………………………………………………… 13

Liner Casing Packer …………………………..…………………………………………..………..……………………….………… 14

Liner Casing Packer Setting Tool ……...………………………..……………………..…………………….………..……….. 15

Latch Seal Unit ………………………………...………………………..……………………..……..…………………………..…….. 16

Locator Seal Unit ………………..…………………..………………………………………..……..………………………..……….. 17

Hold Down Body ……………………………..………………………..………………………...…..………………..………………. 18

Short Open Hole Packer …………………………………..…………….………………....…………………………….…… 19, 20

RC Millable Valve …………………………………………...……………..…………………..………………………….....….. 21, 22

NC Millable Valve ………………..……….………..………………………………………………..………………………….…….. 23

RT Retrievable Ball Actuated Valve ………………..………………..……………..…………………………….......……… 24

Open Hole Anchor …………………………..………………………..………………………...…..………………………….....….. 25

Pressure Actuated Spring Assisted Valve ………………..………………..……………..……………………..…….…… 26

Flow Lock Collar (Ball Actuated Valve) …………………………..…………………..…...…………………..………..…… 27

2 Stage Flow Lock Collar (Ball Actuated Valve) ………………………………..…………...…………………………… 28

Cem Wiper Plug ……………………………..………………………..………..………………..…..…………………………..…….. 29

SUREstart™ Series of Products …….…………………....…………….….………………………..…………………………..…….. 30

SUREstart™ XP Valve …………………………..………………………………...………………..…..………………...…..……... 31

SUREseat Millable Landing Sub ………………………………..…………...…………………………………………….…….. 32

SUREjet Series of Products …….…………...…………..….…………….…………………………..………………………..……….. 33

SUREjet Fracturing System …………………..…………………..………………………..…..………………………..…..…… 34

Abrasive Perforator …………………………..……………………………………………………..…………………….…..…….. 35

SUREjet Packer …………………………..……………………………………………………..…………………………..……..…… 36

Casing Collar Locator …………………..…………………..………………………..…..……………………………..…..………. 37

Perforating Magnet …………………..…………………..………………………..…..……………………………..………..……. 38

SUREstraddle Series of Products …….…………..…………..….…………….………………….………………….……………… 39

SUREstraddle System …………………………..……………………………………………..…………………………..…..……. 40

SUREshift Series of Products …….…………..…………..….…………….…………………….….………………………...…..…… 41

SUREshift RC Valve …………………………..…………………………………………..…….…………………...………..……… 42

SUREshift NC Valve …………………………..…………………………………………..…….…….…………………….……….. 43

SUREshift Shifting Tool …………………………..…………………………………………..…….………………………...…….. 44

Compression Unloader Valve …………………………..………………………………………………………….……..….….. 45

Thru Tubing Products …….……………...………..….…………….……………………………….….…………………………...…….. 46

Thru Tubing WR Plug …………………………..……………………………………...…….…….……………………...…..…….. 47

Gryphon Casing Solution Products …….……………...………..….…………………………….……………….………...…..….. 48

Blue Cap Shoe Track System …………………………..……………………………………...…….…….………..……..…….. 49

Minotaur 10k Float Equipment …………………..…………………..……………………...…………………..………..……. 50

* Contact your local Gryphon Representative for information regarding our available Centralizers, Casing accessories, Standard Float Equipment and Specialized Float Shoes.

Echo Series Products

4

Multistage Fracturing System

USA Corporate Headquarters 1.800.816.7220 Canada Office & Distribution Center 1.800.604.1290

http://www.gryphonoilfield.com [email protected]

The Echo DC multistage fracturing system is a hydraulic fracturing cartridge and

sleeve system designed for open hole or cemented completions. Each sleeve is

opened by pumping a selective cartridge down to the matching profiles in the

sleeves. The cartridges are fully dissolvable post fracturing, requiring no further

intervention. This system provides full bore access before and after fracturing

operations, allowing higher pump rates and well flow at full potential, without ball

seat restriction or milling operations.

The key feature of the Echo DC multistage fracturing system is the increased

efficiency of combining the full-bore benefits of a plug and perf system with the

speed of a ball drop completion while eliminating the requirement for post

fracturing intervention.

Features and Benefits

• Interventionless system

• Pump down seat / sleeve multistage fracturing system

• Keys on sleeve engage matching profile in cartridge

• Full bore liner for high rate fracturing operations

• Reduced conveyance time

• Fully dissolvable

• No milling required

• Increased stage density

• 54 unique stages available

• All stages have the same differential rating

• 10,000 psi (68 MPa) pressure rating (thread dependent)

Specifications

Size Weight Max.

Body O.D. Max.

Seat I.D. Ball Size

Differential Pressure Rating

in lb/ft in in in psi mm kg/m mm mm mm kPa

4-1/2 15.10 5.900 2.000 2.750

10,000 114.3 22.47 149.86 50.80 69.85

5-1/2 23.00 7.000 2.750 3.500 68,948 114.3 34.23 177.80 69.85 88.90

5

http://www.gryphonoilfield.com/

Echo DC Cement Wiper Plug

USA Corporate Headquarters 1.800.816.7220

Canada Office & Distribution Center 1.800.604.1290 http://www.gryphonoilfield.com

[email protected]

The Echo DC cement wiper plug is designed to clean cement from the extended larger I.D. areas of the wellbore while being able expand and collapse without buckling to maintain its cleaning action in cavities of valve sleeves.

The series of specially designed wiper fins are durable enough to wipe the casing I.D. and cavities inside fracturing sleeves to ensure that the Echo DC sleeves can be shifted after the cementing operations are complete. Both latch down and bullnose versions are available depending on application.

Features and Benefits • Designed to activate keys and coat the liner with cement inhibiting

grease • Wiper spacing prevents plug from stalling in profile sleeves • Wiper fins ensure as much cement as possible is cleaned from all

recessed areas • Premium elastomers available on request

Specifications

Size Weight Mandrel O.D.

Overall Length

Pressure Rating (above wiper)

in lb/ft in ft psi mm kg/m mm m kPa

4-1/2 15.10 4.500 1.417 5,000 114.3 22.47 114.30 0.432 34,474

6


Echo Dissolvable Fracturing Plug



[email protected]

The Gryphon Echo series of dissolvable hydraulic fracturing plug technologies are specifically designed to provide a fully dissolvable multistage fracturing solution in the widest variation of applications. Developed with dissolvable magnesium alloys, dissolvable elastomers, and dissolvable high-strength metal-matrix material, the Echo dissolvable frac plugs are capable of withstanding pressures up to 10,000 psi (69 MPa) in temperatures up to 275° F (135° C). This range of performance is attainable due to Gryphon’s extensive research into advanced alloy technologies. The result is a creation of the ideal mix of both materials and product design focused on achieving the ideal downhole performance characteristics for all applications. The Echo series of dissolvable frac plugs are run on industry standard electric line setting tools. Wireline adapter kits are designed to optimize and increase flow area through the kit to maximize run in speed.

The field proven, traditional frac plug design ensures both exceptional performance and reliable dissolution in traditional brine conditions, extreme high temperature scenarios, or even fresh water environments.

Features and Benefits • Material variations available to provide the right tool for the environment • Proprietary dissolvable material available to suit a wide range of fracturing

fluids, including fresh water • Historically proven chassis design

- Compact dual slips - Dissolvable packing element - Dual sealing backup rings

• Innovative shear mechanism eliminates need for shear screws • Ball on seat running tool option • Enables longer laterals not possible with composite plugs and coiled tubing • Eliminates uncertainty, risk and inevitable costs associated with traditional

plug milling and removal • Greater speed-to-production

Specifications Casing Dissolvable Fracturing Plug

O.D. Weight I.D. Max. O.D.

Pressure Rating

Temperature Rating Length

Product in lb/ft in in psi ° F in

mm kg/m mm mm kPa ° C m 4-1/2 11.60 - 13.50 0.875 3.650 8,000 275

13.82 Echo CL Dissolvable Frac Plug 114.3 17.26 - 20.09 22.23 92.71 55,158 135

5-1/2 17.00 - 20.00

1.210 4.500 10,000

250 25.30 - 29.76 114.30 68,948 0.35 Echo FRESH+ Dissolvable Frac Plug 139.7 23.00 - 26.00 30.73 4.270 8,500 120

34.23 - 38.69 108.46 58,605

7

tel:14037203197


TRIDENT Series™ Products

8

SC Composite Fracturing Plug



The Trident SC Composite Fracturing Plug, is a quick millable plug designed for

plug and perf operations. These plugs are run and set on wireline with the ball

on seat or the ball can be pumped down to the plug afterward. After fracturing,

the plugs are milled out to the full drift diameter of the wellbore, allowing for

maximum production.

This plug is designed with molded phenolic components, with a minimum

amount of metal used in the plug.


• Smaller OD and shorter length

• Molded composite material results in robust and consistent performance

• Pump down wiper is a part of the kit, one less part left downhole

• No shear screws left downhole (shear thread disconnect)

• Cast iron slips designed to aid easier mill outs through milled slots and holes

• Ability to pump down plug with ball in place

Specifications Casing Composite Fracturing Plug

Size Weight O.D. I.D. Ball Size Length Pressure

Rating Temperature

Rating

in lb/ft in in in in psi ° F mm kg/m mm mm mm cm kPa ° C

4-1/2 13.50 - 15.10 3.440

0.750 1.750

18.15

10,000

300 20.09 - 22.47 87.38 46.10 114.3 9.50 - 13.50 3.608 44.45 21.93 150

14.14 - 20.09 91.64 19.05 55.71

5-1/2

20.00 - 23.00 4.250

2.250

17.00 68,948 275 29.76 - 34.23 107.95 43.18 135

139.7 17.00 - 26.00 4.390 1.500 57.15 20.62 300 25.30 - 38.69 111.51 38.10 52.37 150

* For more information on additional sizes, please contact your local Gryphon representative

9

tel:14037203197


Hybrid Composite Fracturing Plug



The Trident Hybrid Composite Fracturing Plug is an optimal design that

provides rugged, reliable performance in the well bore and ease of removal

during drill-out. The innovative slip design utilizes a composite upper slip for

more aggressive mill out procedures, while maintaining integrity during

hydraulic operations.

This plug was modeled after the Gryphon Trident SC Composite Frac Plug that

uses a single mandrel, intricate back up system and 10,000 psi (69 MPa) proven

element. The lower slip is ductile cast iron with hardened whickers. The break

up value on the lower slips is increased to prevent pre-sets while running in the

hole and encountering an obstruction. A water saver kit can be included to

reduce the amount of water bypass during pump down operations.


• Composite upper slips for ease of mill-out

• Compatible with standard phenolic or disintegrating balls



• No shear screws left downhole, (shear thread disconnect)

• “Ball on seat” option available during installation

• Single mandrel to reduce damage to plug if impacted

• Short length minimizes drill out time and debris

• 10,000 psi (69 MPa) differential pressure rating

Specifications Casing Fracturing Plug

Size Weight O.D. I.D. Ball Size

Length Pressure

Rating Temperature

Rating


5-1/2 20.00 - 23.00 4.250 0.770

2.250 16.75 10,000 300

25.30 - 38.69 107.95 19.56 150 139.7 17.00 - 26.00 4.390 1.500 57.15 42.55 68,948 275

25.30 - 38.69 111.51 38.10 135

* For information on additional sizes, please contact your local Gryphon representative

10

tel:14037203197


Total Composite Fracturing Plug



The Gryphon Trident Total Composite Fracturing Plug is used to isolate

hydrocarbon formations in multi-stage, plug and perf fracturing operations.

Designed with molded phenolic components and low metallic content, the

Trident Total frac plug can be quickly and easily milled and circulated back to

surface with minimal effort. The plug can be run and set on wireline with a ball

on seat or the ball can be pumped down to the seat prior to beginning the frac

job. After fracturing, the plugs are milled out to the full drift diameter of the

wellbore, allowing for maximum production.


• Smaller OD and shorter length



• No shear screws left downhole (shear thread disconnect)

• Composite slips designed to aid easier mill outs through milled slots and holes


Specifications Casing Fracturing Plug


Rating Temperature

Rating


5-1/2 20.00 - 23.00 4.250 0.750

2.250 16.75 8,000

250 139.7 29.76 - 34.23 107.95 19.05 121

6.0 24.50 4.850 0.758 57.15 42.55 55,158 175 152.4 36.46 123.19 19.25 79

* For more information on additional sizes, please contact your local Gryphon representative

11

tel:14037203197




X Composite Fracturing Plug

The Trident X Composite Fracturing Plug is a quick milling bridge plug designed for

plug and perforate operations. These plugs are run and set on wireline with the ball

on seat or the ball can be pumped down to the plug afterward. After fracturing, the

plugs are milled out to the full drift diameter of the wellbore, allowing for maximum

production.

This plug is designed with all millable components, with an absolute minimum

amount of metal used in the plug. A patent pending composite slip design with cast

iron wickers holds the plug securely in place when the plug is set. An innovative

collet system is utilized to increase the reliability of the shear release during setting.

This state of the art design ensures fast drilling and a secure, pressure tight seal at

an affordable price.



• Near metal free plug, with only slip faces made from millable cast iron

• No shear screws left downhole

• Reliable setting due to collet-based releasing system

• Immediate flow back through large ID mandrel

• High quality composite materials

• Milled material forms small cuttings, similar to sawdust


• Small OD to fit through restrictions

• Set with standard 10 setting tool

• Shorter than industry standard design

Specifications Casing Composite Fracturing Plug


Rating Temperature

Rating


4-1/2 13.50 - 15.10 3.500 1.000 1.250 14.27 10,000 225 114.3 20.09 -22.47 88.90 25.40 31.75 36.25 68,948 107

12

tel:14037203197


SUREstack™ Products

13

Liner Casing Packer



The Liner Casing Packer is a hydraulic set packer designed to hang the liner string in

the casing, providing isolation from above and below. The Liner Casing Packer is

designed for a wide casing range, allowing it to be deployed in diverse applications

including heavier weight casing. A locking, bi-directional slip design eliminates any

concerns of premature setting or breaking slips during running operations. The latch

unit and liner top have a built-in clutch feature which allows for liner rotation up to

the maximum thread torque. This feature also incorporates a 1.5 inch (38.1 mm) free

point which provides simple rotation and removal of the drill / tie back string even in

high deviation applications. With the Gryphon liner and latch assembly, the latch is

the running tool making this ‘one trip system’ another option for saving completion

costs.

Additionally, the Liner Casing Packer has the option of an upper Polished Bore

Receptacle (PBR) which accepts either a Locator Seal Assembly or Anchor Latch Seal

Assembly. Various PBR lengths are available providing a customized application

solution.


• Adjustable setting pressures for different down hole applications


• Ratchet maintains consistent pack off regardless of pressure differentials

• 1.5 inch (38.1 mm) free point assists latch removal

• Centralized above and below

• Rotationally friendly

• Locking bi-directional slip design

• Rated to 400° F (204° C) with standard trim

• Premium threads and elastomers available on request

Specifications

Size Weight Casing Range

Packer O.D.

Packer I.D.

Packer Seal Bore

Seal Assy. I.D.

Pressure Rating

in lb/ft lb/ft in in in in psi mm kg/m kg/m mm mm mm mm kPa

6-5/8 x 4-1/2 15.10 20.00 5.800 3.780

4.865

3.780

10,000

168.3 x 114.3 22.47 29.76 147.32 96.01 96.01

7 x 4-1/2

13.50

23.00 - 32.00 5.900

3.875

3.900 20.09 98.43 123.57 177.8 x 114.3 11.60 34.23 - 47.62 149.86 3.938 99.06 68,948

17.26 100.03

9-5/8 x 5-1/2 17.00 43.50 - 53.50 6.000 4.900 6.000 4.900 244.5 x 139.7 25.30 64.74 - 79.62 152.40 124.46 152.40 124.46

14

tel:14037203197


Liner Casing Packer Setting Tool



The Liner Casing Packer Setting Tool is engineered to be ran in conjunction with the Liner

Casing Packer. It is designed as a secondary setting mechanism for the Liner Casing Packer.

The setting tool consists of three major components. The dual stage pump out plug, cup

mandrel assembly & a latch seal unit. The latch unit has a built-in clutch feature which

allows for liner rotation up to the maximum thread torque as well as a 1.5 inch (38.1 mm)

free point which provides simple rotation and removal of the drill / tie back string even in

high deviation applications. The dual stage pump out plug allows fluid to be pumped

through the ID until a ball is launched and lands in the pump out plug, which stops the flow

of fluid, isolating the setting tool and allowing pressure to set the Liner Casing Packer.

Once the packer is set, tubing pressure can be increased until the pump out plug shears

and once again flow is established.


• Chevron type v-seals

• Primary or secondary setting feature for Liner Casing Packer

• Adjustable shears for pack off forces on Liner Casing Packer

• Dual redundant cup system

• Available with a wide variety of seal configurations

• Clutch allows for rotation up to maximum thread torque

• 1.5 inch (38.1 mm) free point which allows for simple rotation and removal

• 10,000 psi (69 MPa) rated


15

tel:14037203197


Latch Seal Unit



The Latch Seal Unit provides a positive anchoring of the production tubing to the

liner casing packer preventing upward movement of the tubing due to pressure or

tension. The latch automatically latches by engaging threads on the packer and is

released by right hand rotation. A clutch feature built into the latch body allows liner

rotation up to maximum thread torque. This feature also provides a 1.5 inch (38.1

mm) free point which allows for simple rotation and removal of the drill/tie back

string even in high deviation applications. Designed to provide a dependable, leak-

proof seal between a seal bore packer and the production string, this seal assembly

features the field proven Chevron Type V-Seal design in an opposed seal

configuration using metal back up and spacer rings.


• Chevron type V-seals


• Clutch allows for rotation up to maximum thread torque

• 1.5 inch (38.1 mm) free point which allows for simple rotation and removal

• Adjustable activation pressure for varied down hole applications


• I.D. and O.D. designed to pipe diameter



Specifications

Fits Packer Seal Bore

Body Max. O.D.

Seal Unit Min. I.D.

Pressure Rating

in in in psi mm mm mm kPa

4.865

5.750 3.720

10,000

146.05 94.49

123.57 5.900 3.900 149.86 99.06 68,948

6.000 7.000 4.900 153.00 177.80 124.46

16

tel:14037203197


Locator Seal Unit



The Locator Seal Unit is used to locate and seal the end of a tieback casing string into

the receptacle installed on the top of the liner top packer. It can be used in

conjunction with a hold down body to ensure that a pressure tight seal is maintained

when the pressure in the casing is increased, such as during fracturing treatment

operations. Designed to provide a dependable, leak-proof seal between a packer

seal bore and the casing string, this seal assembly features the field proven Chevron

type v-seal design in an opposed seal configuration using metal back up and spacer

rings. For horizontal applications where string rotation is very limited, the Locator

Seal Unit can be anchored by adding the Gryphon hold down body above the locator

seal unit to provide an anchor.


• Chevron type V-seals


• O.D. designed to pipe diameter



Specifications

Fits Packer Seal Bore

Seal Unit Max. O.D.

Seal Unit Min. I.D.

Pressure Rating


4.865

5.750 3.720 13,000 146.05 94.49 89,632

123.57 5.900 3.900

10,000 149.86 99.06

6.000 7.000 4.900 68,948 153.00 177.80 124.46

17

tel:14037203197


Hold Down Body



The Hold Down Body is a reliable pressure actuated hold down device which is

designed to be run above a Locator Seal Assembly. This design is ideal for horizontal

wells where rotation of the string is limited. When tubing pressure exceeds annulus

pressure, the hydraulic hold down slips are forced outward against the casing wall,

ensuring positive anchoring and eliminating any upward movement of the string.

When the annulus pressure exceeds the tubing pressure, the hydraulic hold down

slips automatically retract.


• Ideal for horizontal stimulation or testing operations

• Rugged slip design prevents upward movement

• Hydraulic area protected from debris

• Full drift I.D.

• Gauge rings ensure centralization

• Torque through capability



Specifications

Liner Size

Liner Weight

Casing Size

Casing Weight

Gauge O.D.

Tool I.D.

Pressure Rating

in lb/ft in lb/ft in in psi mm kg/m mm kg/m mm mm kPa

4-1/2

15.10 6-5/8

24.00 5.750

3.720

10,000

35.72 146.05

22.47 168.3 20.00 5.850 94.49 114.3 29.76 148.59 68,948

11.60 7 20.00 - 29.00 6.031 3.880 17.26 177.8 29.76 - 43.16 153.19 98.55

18

tel:14037203197


Short Open Hole Packer



The Short Open Hole Packer is a hydraulic set packer designed to provide isolation between open hole frac stages. The large bore I.D. allows future milling / retrieving and service tools to pass through without issue. The short design facilitates reliable deployment through aggressive build sections in the well bore and eliminates the need for handling pup joints, reducing completion costs. The Short Open Hole Packer comes standard with an integrated rotating, hardened, low friction centralizer to help ensure smooth installation of liner systems. Because of it’s proximity to the element, the centralizer provides improved element stand-off in the open hole section providing a more reliable seal. An anti-extrusion back up ring system provides improved element pack off, allowing for reliable sealing in open hole sections.




• Element anti-extrusion back-up system, with o-ring back-ups for improved pressure integrity


• Rotating centralizer integrated into packer design

• Centralizer placement allows even element pack off, with other systems the setting of the tools forces the packer elements to lift and centralize the entire liner string while setting

• Centralizer rotation designed to ensure residual torque is used to tighten connections

• Centralizer is hardened and coated to help ensure smooth packer installation



See specification table on next page

19

tel:14037203197


Short Open Hole Packer



Specifications

Connection Size

Connection Weight

Packer I.D.

Open Hole Size

Centralizer O.D.

Packer O.D.

Pressure Rating

in in in in in in psi mm mm mm mm mm mm kPa

3-1/2 9.30 2.937 4.750 4.500 4.375

10,000

88.9 13.84 74.60 120.7 114.30 111.13

4-1/2

15.10 3.720

5.625 5.438

5.380 142.9 138.13

22.47 94.49 5.750 5.563 136.65 146.1 141.30

13.50 3.875

6.000 5.813

5.630 152.4 147.65

6.125 5.938 143.00 20.09 98.43 155.6 150.83

6.250 6.063 5.812 68,948 114.3 158.8 154.00 147.62

11.60 3.938

5.880 5.688

5.630

149.4 144.48

6.000 5.813 152.4 147.65 143.00

17.26 100.03 6.125 5.938 155.6 150.83

6.250 6.063 5.812 158.8 154.00 147.62

5-1/2

7.750 7.563

7.375

14,000

196.9 192.10 7.875 7.688 187.33 200.0 195.28 8.000 7.813

7.625

96,527 203.2 198.45

23.00 4.670 8.125 7.938 193.68 34.23 118.62 206.4 201.63

or or 8.250 8.063

7.875

15,000

20.00 4.778 209.6 204.80

139.7 29.76 121.36 8.375 8.188 200.03

or or 212.7 207.98

17.00 4.892 8.500 8.313

8.125 25.30 124.26 215.9 211.15 8.625 8.438 206.38 103,421 219.1 214.33 8.750 8.563

8.375 222.3 217.50

8.875 8.688 212.73 225.4 220.68

20

tel:14037203197


RC Millable Valve



[email protected]

The SUREstack™ RC Millable Valve is a ball activated fracturing sleeve designed for multiple frac stages in a well bore. High flow circumferential ports located on the housing of the sleeve permits continuous communication to the reservoir for high pressure fracturing operations and production. This system uses low specific gravity balls, which encourages flow back when the well is put on production. Specially designed anti-rotational features are incorporated into the sleeve to ensure reliable seat mill-out performance. Utilizing a designated shifting tool, the valve sleeve can be closed to shut-off water producing intervals or for interval production evaluation.

The SUREstack™ RC Millable Valve is available in 0.063, 0.094 and 0.125 inch (1.60, 2.39 and 3.18 mm) ball increments, allowing for increased interval density to optimize production and to permit higher achievable fracturing pump rates.

Features and Benefits • Compact design for ease of handling (no pup joints required) • Improved ball seat geometric features to enhance production capability, ball

on seat pressure rating, and ball off seat performance • Simple valve, with only 4 main components • Extremely short valve, allowing for tighter stages • Up to 42 stages when run with a SUREstart™ Valve • Re-closable, designed for open-hole applications • Utilizes easy to mill ball seat from Gryphon’s other millable valves • Compatible with all types of Gryphon’s fracturing balls including dissolvables • Rated to 400° F (204° C) with standard trim, elastomer upgrades available See specification table on next page

21

tel:14037203197


RC Millable Valve



[email protected]

Specifications

Size Weight Max. O.D.

Seat Increment

Post Millout I.D.

Max. Ball Size

Max. Seat I.D.

Min. Ball Size

Min. Seat I.D.

in lb/ft in in in in in in in mm kg/m mm mm mm mm mm mm mm

4-1/2

15.10 5.400 0.125

3.701 3.125 3.350 3.125 3.015

3.18 79.38 85.09 79.38 76.58 22.47 137.16 0.063 94.01 3.375 3.328 0.875 0.813

1.60 85.73 84.53 22.23 20.65

11.60 - 13.50 5.750

0.125

3.875

3.625 3.515 3.125 3.015 114.3 3.18 92.08 89.28 79.38 76.58

0.094 3.750 3.671 3.469 3.390 17.26 - 20.09 146.05 2.39 98.43 95.25 93.24 88.11 86.11

0.063 3.375 3.328 0.875 0.813 1.60 85.73 84.53 22.23 20.65

5-1/2

23.00

7.000

0.125

4.500

4.500 4.390 3.875 3.765 3.18 114.30 111.51 98.43 95.63

0.094 3.750 3.671 3.469 3.390 34.23 2.39 114.30 95.25 93.24 88.11 86.11

0.063 3.375 3.328 1.500 1.453 1.60 85.73 84.53 38.10 36.91

20.00

0.125

4.625

4.625 4.515 3.875 3.765 3.18 117.48 114.68 98.43 95.63

0.094 3.750 3.671 3.469 3.390 139.7 29.76 177.80 2.39 117.48 95.25 93.24 88.11 86.11

0.063 3.375 3.328 1.500 1.453 1.60 85.73 84.53 38.10 36.91

17.00

0.125

4.750

4.750 4.640 3.875 3.765 3.18 120.65 117.86 98.43 95.63

0.094 3.750 3.671 3.469 3.390 25.30 2.39 120.65 95.25 93.24 88.11 86.11

0.063 3.375 3.328 1.500 1.453 1.60 85.73 84.53 38.10 36.91

22

tel:14037203197


NC Millable Valve



[email protected]

The SUREstack™ NC system is a revolutionary liner system for cemented or open hole applications. The permanently locked open, ball activated SUREstack™ NC valve is designed for installation in cased holes and is simple, yet economical to deploy, utilizing Gryphon’s ball and seat technology. Balls are available in either a dissolvable or conventional millable style. The standard system is equipped with HNBR elastomers and LTC or BTC threads or can be ordered with premium elastomers and threads.

This system is intended to reduce the cost of a liner system by simplifying the valve as much as possible and by eliminating the requirement for open hole packers in cemented applications. Minimizing the equipment installed in the wellbore reduces not only the equipment cost, but also the time and risk associated with installation of any equipment.

Features and Benefits • Compact design for ease of handling (no pup joints required) • Improved ball seat geometric features to enhance production capability, ball

on seat pressure rating, and ball off seat performance • Simple valve, with only 4 main components • Extremely short valve, with no requirement for open hole packers in

cemented applications, allowing for tighter stages • Up to 47 stages when run with a SUREstart™ Valve • Non-closable design • Utilizes easy to mill ball seat from Gryphon’s other millable valves • Compatible with all types of Gryphon’s fracturing balls including dissolvables • Rated to 400° F (204° C) with standard trim, elastomer upgrades available

Specifications


Post Millout I.D.

Max. Ball Size

Max. Seat I.D.

Min. Ball Size

Min. Seat I.D.

Pressure Rating

in lb/ft in in in in in in psi mm kg/m mm mm mm mm mm mm kPa

4-1/2 11.60 - 13.50 5.800 3.875 3.750 3.671 0.875 0.828 10,000 114.3 17.26 - 20.09 147.32 98.43 95.25 93.24

5-1/2 17.00 - 20.00 7.000 4.767 4.750 4.640 22.23 21.03 68,948 139.7 25.30 - 29.76 177.80 121.08 120.65 117.86

23


RT Retrievable Valve



The SUREstack™ RT Retrievable Valve is a ball-activated fracturing sleeve, designed

to allow for multiple frac stages in a horizontal well bore. Once the well has been

fractured, it can either be shut in or flowed back depending on customer preference.

Using a service rig or coiled tubing unit and a Gryphon retrieving tool, the seats are

retrieved with a simple tag and release method.

With its patented design, up to 36 seats can be retrieved in a single trip. Utilizing a

designated shifting tool, the sleeve(s) can then be closed to shut-off water producing

intervals or for interval production evaluation. This system utilizes low specific

gravity balls which encourage flow back when the well is put on production.


• No milling or drilling

• Full drift inner diameter after seat retrieval

• Decrease post frac, pre-production time by up to 40%

• Flow port area designed to prevent screen out and reduce solids inflow

• Compact design for ease of handling (no pup joints required)

• Available in 3-1/2 and 4-1/2 inch (88.9 and 114.3 mm) sizes

• Available in 0.050 and 0.100 inch (1.27 and 2.54 mm) ball seat increments allowing for increased interval density to optimize production and to permit greater achievable fracturing pump rates

• Locking design ensures sleeve cannot prematurely shift closed

• Up to 37 stages in 4-1/2 inch (114.3 mm) size

• Closable sleeve feature for production optimization

• Adjustable activation pressure

• Circulation capability during retrieval improves wellbore clean-out




Specifications


Min. I.D. Post Retrieval

Seat Increment

Max. Ball Size

Max. Seat I.D.

Min. Ball Size

Min. Seat I.D. Max.

Stages in lb/ft in in in in in in in mm kg/m mm mm mm mm mm mm mm

3-1/2

9.30 4.625 2.867 1.750 1.715

0.850 0.815

20 13.84 117.48 72.82 44.45 43.56

88.9 12.95 4.500 2.625 0.050 1.400 1.365 13

19.27 114.30 66.68 1.27 35.56 34.67

4-1/2

11.60

5.750

3.875 or

2.600 2.565 37

17.26 98.43 0.100 21.59 20.70

13.50 3.795 2.54 66.04 65.15 114.3 20.09 146.05 96.39

15.10 3.700 2.500 2.465 35

22.47 93.98 63.50 62.61

24

tel:14037203197


Open Hole Anchor



The Open Hole Anchor is a hydraulic set anchor primarily designed to anchor the

bottom of a liner assembly into the open hole to prevent any unwanted and

potentially damaging movement in the liner string during fracturing operations.

Bi-directional slips are locked in place during running, eliminating the possibility

of premature setting.





• Locking slip design provides reliable deployment



Specifications

Size Open Hole

Size Anchor

O.D. Anchor

I.D. Pressure

Rating

in in in in psi mm mm mm mm kPa

4-1/2

5.625 5.380 3.720

10,000

142.9 136.65 94.49

6.000 5.750

4.000 114.3 152.4 146.05 68,948

6.125 - 6.250 5.900 101.60 155.6 - 158.8 149.86

5-1/2

7.750 - 8.125 7.375

4.778 11,000 196.9 - 206.4 187.33

139.7 8.250 - 8.875 7.875 121.36 75,842 209.6 - 225.4 200.03

25

tel:14037203197


Pressure Actuated Valve (PAV)



The Pressure Actuated Valve is a hydraulically activated fracturing sleeve,

designed to initiate fracturing operations. Internal tubing pressure is applied

to a predetermined pressure, activating a piston until the shear screws shear

to open the valve. After opening, a locking system ensures that the valve

cannot re-close.



• Simplicity of design enhances reliability

• Ports have larger flow area than the liner to assist in preventing screen

outs

• Adjustable activation pressures for different down hole applications

• Spring assisted valve and locking system ensures valve always opens and stays locked in the open position

• Valve system protected from manual manipulation both internally and

externally

• Full bore I.D.


Specifications Guide

Size Weight Max. O.D. Min. I.D. Pressure

Rating

in lb/ft in in psi mm kg/m mm mm kPa

3-1/2 9.30 4.311 3.000

10,000

88.9 13.84 109.50 76.20

4-1/2

15.10 5.500 3.720 22.47 139.70 94.49

13.50 5.625

3.875 114.3 20.09 98.43

11.60 142.88 4.000 68,948

17.26 101.60

5-1/2

17.00

7.750

4.892 25.30 124.26

139.7 20.00 196.85 4.813 29.76 122.25

26

tel:14037203197


Flow Lock Collar



The Flow Lock Collar is a ball activated tubing isolation valve, designed to

allow the liner system to be set after the wellbore has been circulated with the

desired fluid. A ball is circulated down the tubing until it lands on the flow lock

seat. Pressure is applied from above until the predetermined activation

pressure is achieved, shifting a piston which locks into the closed position and

permanently shuts off the liner until the frac is initiated. Pressure can now be

increased to set the remaining liner components.


• Once shifted, piston locks closed and cannot be re-opened

• Available with a 0.750 or 1.125 inch (19.05 or 28.58 mm) I.D. to allow for higher density fluid type circulation






Specifications

Size Max. O.D.

Ball Size Flow Area

Pressure Rating

in in in in2 psi mm mm mm cm2 kPa

4-1/2 4.500 0.800 0.44

10,000

20.32 2.85 114.30 114.30 1.250 0.99

31.75 6.41

5-1/2 6.050

1.150

0.79

68,948 29.21

139.70 153.67 1.150 5.07 29.21

27


2 Stage Flow Lock Collar



The 2 Stage Flow Lock Collar in the SUREstack™ cementable system is

designed to allow for completions utilizing a cemented liner casing packer.

Once the liner is in position, a ball is pumped from surface to close off the first

stage of the flow lock collar, allowing pressure to be built up to set the liner

casing packer slips. Increased pressure will then shear out the ball seat and

allow the cement to be pumped past the flow lock collar and around the liner

system. At the tail of the cement, the SUREstack™ Cem Wiper Plug is

deployed to clean any cement out of the string and permanently close off the

toe of the string to hold the cement in place and allow it to cure.


• 10,000 psi (69 MPa) working pressure

• Once shifted, piston locks closed and cannot be re-opened


• High volume flow ports for cement displacement


• O.D. designed to pipe diameter




Specifications

Size Max. O.D.

Ball Size Flow Area

Pressure Rating

in in in in2 psi mm mm mm cm2 kPa

4-1/2 5.000 0.800 0.33 10,000 114.3 127.00 20.32 2.13 68,948

28

tel:14037203197


Cem Wiper Plug



The Cem Wiper Plug is designed to clean cement from the extended

larger I.D. areas of the wellbore while being able expand and collapse

without buckling to maintain its cleaning action in cavities of valve

sleeves.

The series of specially designed wiper fins are durable enough to wipe the

casing I.D. and cavities inside fracturing sleeves to ensure that the valve

sleeves can be shifted after the cementing operations are complete. Once

wiping is completed, the wiper plug seals in the landing collar, preventing

flow back.


• Able to clean both large and small diameters

• Wiper spacing prevents plug from stalling in profile sleeves

• Wiper fins ensure as much cement as possible is cleaned from all recessed areas

• Premium elastomers available on request

Specifications

Size Max. O.D.

Minimum I.D. (wiper can pass thru)

Pressure Rating (above wiper)


4-1/2 4.500 2.250 5,000 114.3 114.30 57.15 34,474

29

tel:14037203197


SUREstart™ Products

30

SUREstart™ XP Valve



[email protected]

The SUREstart™ XP Valve is a pressure actuated sliding sleeve which is designed to be run on the bottom of a cemented completion string, providing a method of pressure testing the casing, then initiating the first fracturing stage. When surface pressure is applied to open the valve, circulation is established with the formation to allow for subsequent treatment operations. Once activated, the spring assisted piston and lock open feature ensures that the sleeve is always fully open.

Features and Benefits • Compact design for ease of handling (no pup joints required) • Internal piston is protected and hydraulically balanced to prevent premature

activation • Spring assisted piston and magnetic lock-open feature ensures valve fully

opens and remains open • Equipped with interchangeable burst disks, available in 500 psi (3.5 MPa)

increments • Flow port area designed to prevent screen out • Full drift I.D. to allow standard wiper plugs to pass through the valve

unimpeded • Torque through capability • Rated to 400° F (204° C) with standard trim, elastomer upgrades available • Available with total pressure rating up to 20,000 psi (138 MPa)

Specifications

Size Casing Range O.D. I.D. Connection Size

Max. Total Pressure

in lb/ft in in in psi mm kg/m mm mm mm kPa

4-1/2 13.50 - 15.10

5.900 3.815

4.50 17,000

20.09 - 22.47 96.90 117,211 114.3 11.60 - 13.50 149.86 3.895 114.3 15,000

17.26 - 20.09 98.93 103,421 5 18.00 5.780 3.620 4.50 & 5.0

20,000 127.0 26.79 146.81 91.95 114.3 & 127.0

5-1/2 17.00 - 23.00 6.125 3.895

5.50 155.58 98.93 137,895 139.7 25.30 - 34.23 7.250 4.787 139.7

184.15 121.59

31

tel:14037203197


Millable Landing Sub



The SUREseat Millable Landing Sub is designed to be used for testing casing

integrity either before or after a fracturing treatment. It can be installed above a

SUREstart™ valve to ensure wellbore integrity after the first zone is pumped, or it

can be positioned above Gryphons’ SUREstack™ system and used to verify the

integrity of the string to surface after the fracturing jobs have been completed

(Directive 083 – Subsurface Integrity).


• Utilizes Gryphons’ ball seat technology for maximum ball on seat ratings

• Available with fibreglass or dissolvable balls

• Easily millable, durable cast iron ball seats

• A wide range of ball seats available

• Customizable ball on seat pressure ratings

• Compact, torque through housing

Specifications


Post Millout I.D.

Max. Ball Size

Max. Seat I.D.

Min. Ball Size

Min. Seat I.D.

in lb/ft in in in in in in mm kg/m mm mm mm mm mm mm

4-1/2 11.60 - 13.50 5.750 3.875 3.750 3.640

3.000 2.890

114.3 17.26 - 20.09 146.05 98.43 95.25 92.46

5-1/2

23.00

7.000

4.500 4.500 4.390 34.23 114.30 114.30 111.51

20.00 4.625 4.625 4.515 76.20 73.41 139.7 29.76 177.80 117.48 117.48 114.68

17.00 4.750 4.750 4.640 25.30 120.65 120.65 117.86

32

tel:14037203197


SUREjet Products

33

SUREjet Fracturing System



The SUREjet Abrasive Jet Fracturing System brings proven reliability and efficiency

to annular fracturing operations. As an economical alternative to coiled tubing

fracturing sleeves, the system requires no auxiliary liner equipment and works

effectively in sand-laden environments providing on-the-fly pinpoint fracturing. It is

designed to fracture multiple stages reliably in sand-laden environments in a single

trip. This system has demonstrated proven reliability with zero tool non-productive

time, successfully completing over 1,000 fracturing stages, averaging 20 stages per

well, in various formations.


• Advanced design capable of cutting and fracturing more than 40 fracturing stages in a single trip

• Abrasive perforator has 5 to 8 minute cut interval capability using standard fracturing sand

• Mechanical collar locator has field adjustable over-pull which increases depth correlation reliability in longer laterals and minimizes tool failure

• Unloader valve designed to function effectively in heavy sand-laden environments

• Works in both 4-1/2 inch (114.3 mm) and 5-1/2 inch (139.7 mm) wellbores

• Unique component coatings provide element longevity and component erosion resistance

• Rated to 400° F (204° C) with standard trim, elastomer upgrades available

Specifications

Casing Size

Casing Weight

Casing I.D. Gauge O.D. Pressure

Rating Connection

Size

in lb/ft mm mm psi in mm kg/m in in kPa mm

4-1/2

15.10 3.823 3.690

10,000

22.47 97.10 93.73

13.50 3.920 3.785 114.3 20.09 99.57 96.14 2-3/8

11.60 4.000 3.785 60.3 17.26 101.60 96.14 EUE Box

5-1/2

23.00 4.670 4.535 68,948 x 34.23 118.62 115.19 NUE Pin 20.00 4.778 4.643 Down

139.7 29.76 121.36 117.93

17.00 4.892 4.757 25.30 124.26 120.83

34


Abrasive Perforator



[email protected]

The SUREjet Abrasive Perforator is a compact, powerful tool which is used to bore holes in casings and gain access to the formation without the need for any equipment to be installed in the casing string. Used in new monobore applications as part of the SUREjet system, to increase flexibility with the SUREshift system or for re-stimulation of old wells.


• 3 carbide nozzles spaced at 120° • Uses 20/40 mesh sand or 100 mesh sand to cut • Multiple nozzle sizes for different applications • Carbide sleeves for added wear resistance • Compact tool for minimal BHA length • Compatible with the Gryphon SUREshift system

Specifications Tool O.D.

Tool I.D.

Nozzle Size

Max. Nozzle Flow Area Connection

in in in in2 in mm mm mm cm2 mm

2.875 1.500

0.150 0.05

2-3/8 NUE 3.81 0.34

0.188 0.08 73.03 38.10 4.78 0.54 60.3 NUE

0.250 0.15 6.35 0.95

35


SUREjet Packer



The SUREjet Annular Frac Packer is a multi-set, single grip, compression set packer

designed to provide isolation in cased hole fracturing operations. Although this

packer is designed to be deployed on coil tubing, it can also be run on jointed pipe in

either vertical or horizontal applications. A specially developed sand friendly

continuous jay and integral bypass system allows reliable run, set and retrieving

during fracturing operations. This packer can also be utilized for pressure testing

operations in liner applications. The modular design allows this packer to be easily

converted to a straddle packer assembly.


• No rotation required for setting

• Continuous jay system designed for reliable functioning in sand-laden conditions

• Integral bypass allows equalization at the packer

• Low pack-off force required to fully set element

• Available for 6,000 or 10,000 psi (41 or 69 MPa) differential rating

• Carbide slips ensure a reliable non-slip set in sand-laden conditions


Specifications

Casing Size

Casing Weight

Casing I.D. Gauge

O.D. Pressure

Rating Connection

Size

in lb/ft in in psi in mm kg/m mm mm kPa mm

4-1/2 9.50 - 13.50 3.920 - 4.090 3.771

6,000

2-3/8

114.3 14.10 - 20.09 99.57 - 103.89 95.78

5-1/2

20.00 - 23.00 4.670 - 4.778 4.500 29.76 - 34.23 118-61 - 121.36 114.30 41,369

139.7 15.50 - 17.00 4.892 - 4.950 4.718 23.07 - 25.30 124.26 - 125.73 119.84

4-1/2

15.10 3.823 3.690

10,000

22.47 97.10 93.73 60.3

13.50 3.920 3.785 EUE Pin Up 114.3 20.09 99.57 96.14 x

11.60 4.000 3.785 NUE Pin 17.26 101.60 96.14 Down

5-1/2

23.00 4.670 4.535 68,948 34.23 118.62 115.19

20.00 4.778 4.643 139.7 29.76 121.36 117.93

17.00 4.892 4.757 25.30 124.26 120.83

36

tel:14037203197


Casing Collar Locator (CCL)



[email protected]

The SUREjet Casing Collar Locator is utilized to indicate tool depth on wells with casing collar gaps, such as casing with LTC threads. The locating dogs snap into the collar gaps of each casing connection, providing an overpull indication as the tool travels up the wellbore. This overpull indication can be compared with the pipe tally to provide accurate depth confirmation when it is required, such as when perforating with the SUREjet System.


• Adjustable overpull force • Designed to function in sand and debris laden environments • Heat treated indicator blocks • Inexpensive to redress

Specifications Casing

Size Casing Range

Max. O.D.

Tool I.D. Connection

in lb/ft in in in mm kg/m mm mm mm

4-1/2 9.5 - 13.5 4.300

1.500 2-3/8 NUE

114.3 14.1 - 20.1 109.2

5-1/2

23.00 4.970 34.23 126.2 20.00 5.078 38.10 60.3 NUE

139.7 29.76 129.0 15.50 - 17.00 5.192

23.1 - 25.3 131.9

37

tel:14037203197


Perforating Magnet



The SUREjet Perforating Magnet is designed to clear any wellbore debris and keep

it away from the packing elements or cups in the SUREjet or SUREstraddle systems.

The powerful magnets gather debris and keep them firmly in place until the tool

string is removed from the wellbore.


• Powerful rare earth magnets

• Stainless steel protection sleeve

• Flow though design

• Isolators to prevent magnets from being broken due to shock loads

• Available with NUE or PAC connection

• Optional mule shoe or through connections

Specifications

Tubing Size

Tubing Weight

Max. O.D.

Pressure Rating

Upper Connection

in lb/ft in psi in mm kg/m mm kPa mm

2-3/8 4.70 3.771 10,000 2-3/8 NUE / PAC 60.3 6.99 95.78 68,948 60.3 NUE / PAC

38


SUREstraddle Products

39

SUREstraddle System



The SUREstraddle system is Gryphon Oilfield’s next generation of straddle tools.

Two versions are available in 6,000 and 10,000 psi (41 and 69 MPa) rated tools. Both

tools take advantage of the reliable SUREjet packer as the bottom sealing element

and a high flow sub with Gryphon’s unique coating as the communication port

ensuring reliable fracturing. For the 6,000 psi (41 MPa) version is a simple, cost

effective tool with a durable cup mandrel run as the top sealing element. For the

10,000 psi (69 MPa) rated tool, the top section includes a locking unloader valve, cup

mandrel and slip package, all in one assembly. The top pressure activated slips

ensure that when the tool is set, and pressure is applied to the tubing, there is no

chance of the tool moving or the unloaders opening. The high pressure, multi-

durometer cups are designed for maximum durability.


• Spacing is achieved with 2-3/8 inch (60.3 mm) blast joint with no special components required

• Unique locking unloader keeps the unloader closed when treating or pressure testing

• 10,000 psi (69 MPa) multi-durometer cups for maximum stage counts

• Tool is locked in place by two sets of slips when pumping to ensure that the interval of interest is isolated for the duration of the treatment

• Emergency hydraulic slip release

• Unique component coatings provide element longevity and component erosion resistance

• Unloader valve designed to function effectively in heavy sand-laden environments


Specifications

Casing Size

Casing Weight

Casing I.D.

Gauge O.D.

Pressure Rating

Connection Size

in lb/ft mm mm psi in mm kg/m in in kPa mm

4-1/2

15.10 3.823 3.690

10,000

22.47 97.10 93.73 13.50 3.920 3.785

114.3 20.09 99.57 96.14 2-3/8

11.60 4.000 3.785 60.3 17.26 101.60 96.14 68,948 EUE

5-1/2

23.00 4.670 4.535 Box x Pin 34.23 118.62 115.19

139.7 20.00 4.778 4.643 29.76 121.36 117.93

40

tel:14037203197


SUREshift Products

41

SUREshift RC Valve



The SUREshift RC fracturing valve and shifting tool is engineered for coiled tubing

fracturing operations. Its compact design and simple operating mechanism provides

reliable tool operation requiring only one shifting tool to open and close the sleeve.

Additionally, the SUREshift RC valve can be utilized in multiple configurations based

on isolation requirements and is suitable for re-fracturing operations.

The valves’ shifting sleeve is designed and proven to function reliably when exposed

to hardened cement sheath. With its shift up to open design, the sleeve is tolerant to

cement wiper plugs, ensuring the sleeve cannot inadvertently shift during

cementing operations.


• 10,000 psi (69 MPa) working pressure

• 6,000 – 8,000 lbs (2,668 – 3,558 daN) to shift sleeve open and closed

• Integral jetting nozzles for clearing potential debris from valves

• Unlimited stages

• Selective sleeve activation

• Shift up to open, prevents valve sleeve from opening when running wiper plug and ensures valve actuation in extended reach applications

• Shifting keys retract when pumping down the tubing and are designed to auto locate valves to limit operator error

• Specialized design prevents cement from adhering to the tool which could prevent the valve from opening

• Screen out friendly

• Re-closable and permanently locked open versions are available


Specifications

Casing Size

Casing Weight

Body O.D.

Body I.D.

Pressure Rating


4-1/2

15.10

5.750

3.830

10,000

22.47 97.28

13.50 3.920 114.3 20.09 146.05 99.57

11.60 4.000 17.26 101.60

5-1/2

23.00

7.000

4.670 68,948 34.23 118.62

20.00 4.778 139.7 29.76 177.80 121.36

17.00 4.892 25.30 124.26

42

tel:14037203197


SUREshift NC Valve



[email protected]

The SUREshift NC fracturing valve and shifting tool are engineered for coiled tubing fracturing operations. Its compact design and simple operating mechanism provides reliable tool operation, requiring only one shifting tool to open the sleeve. Additionally, the SUREshift NC valve can be utilized in multiple configurations based on isolation requirements and is suitable for re-fracturing operations.

The valves’ shifting sleeve is designed and proven to function reliably when exposed to hardened cement sheath. With its shift up to open design, the sleeve is tolerant to cement wiper plugs, ensuring the sleeve cannot inadvertently shift during cementing operations.

Features and Benefits • 10,000 psi (69 MPa) working pressure • 2,000 – 16,000 lbs (890 – 7,117 daN) to shift sleeve open • Valves are permanently locked open once activated • Can be run with the re-closable SUREshift RC and uses the same shifting tool

for maximum versatility • Unlimited stages • Selective sleeve activation • Shift up to open, prevents valve sleeve from opening when running wiper plug

and ensures valve actuation in extended reach applications • Specialized design prevents cement from adhering to the tool which could

prevent the valve from opening • Rated to 400° F (204° C) with standard trim, elastomer upgrades available

Specifications Casing

Size Casing Weight

Body O.D.

Body I.D.

Pressure Rating


4-1/2

15.10

5.750

3.830

10,000

22.47 97.28 13.50 3.920

114.3 20.09 146.05 99.57 11.60 4.000 17.26 101.60

5-1/2

23.00

7.000

4.670 68,948 34.23 118.62 20.00 4.778

139.7 29.76 177.80 121.36 17.00 4.892 25.30 124.26

43

tel:14037203197


SUREshift Shifting Tool



[email protected]

The SUREshift Shifting Tool is engineered to be installed on coiled tubing and used during fracturing operations to selectively open or close Gryphons’ SUREshift NC or RC valves. Its compact design and simple operating mechanism provides reliable tool operation for shifting the SUREshift valves.

The shifting tool utilizes fluid flow down the tubing to retract the keys and allow the tool to move freely in the wellbore. Rates as low as 1.6 bbls/min (250 L/min) will retract the keys.

Features and Benefits • Can be run with the SUREjet system • Hardened keys for maximum key life • Automatic key extension of keys when pumping is stopped • Integral jetting nozzles for clearing potential debris from valves • Carbide choke to allow abrasive cut sand to be pumped through the tool • Shifting keys retract when pumping down the tubing and are designed to auto

locate valves to limit operator error • Rated to 400° F (204° C) with standard trim, elastomer upgrades available

Specifications Casing SUREshift Shifting Tool

Size Weight Body O.D.

Upper Connection

in lb/ft in in mm kg/m mm mm

4-1/2 15.10 3.650

2-3/8 EUE Box 22.47 92.71

114.3 9.50-13.50 3.750 14.14-20.09 95.25 60.3 EUE Box

5-1/2 17.00-23.00 4.420 139.7 25.30-34.23 112.27

44

tel:14037203197


Compression Unloader Valve



The Compression Unloader Valve is a compact and versatile unloader valve for

fracturing with the SUREshift System. This valve can be utilized for both fracturing

down tubing or fracturing down the annulus. The compression unloader is equipped

with a specially designed locking system which allows the valve to be locked in the

closed position by pressurizing the tubing.

When utilized for fracturing down the annulus, the compression unloader is

installed below the SUREshift shifting tool and is used to allow flow out of the tubing

during the fracturing procedure. This keeps the tubing and abrasive jetting ports

clear in case of a sand off and allows for high rates of circulation if a sand off occurs.

When used fracturing down the tubing, the unloader is installed above the

SUREshift shifting tool and is used as the flow port. The heat-treated components of

the Compression Unloader Valve are designed for long life in highly abrasive

environments. If there is a need to abrasive jet cut, the unloader is closed, locked and

then pumping down the tubing will allow the abrasive cutter to be utilized.


• Compact design

• Hardened components and large ports allow for high erosion tolerance

• Simple, effective locking mechanism

• Port area larger than tubing flow area

Specifications

Max. O.D.

Min. I.D. Port

Flow Area Threads

Pressure Rating

in in in2 in psi mm mm cm2 mm kPa

3.650 1.600 6.92 2-3/8 EUE 10,000 92.71 40.64 44.62 60.3 EUE 68,948

45

tel:14037203197


Thru Tubing Products

46

Thru Tubing WR Plug



The SUREplug Thru Tubing WR Plug is a retrievable bridge plug which can be

conveyed and set on wireline, slickline or hydraulically set on coil tubing using a

hydraulic setting tool. It is commonly used for well or zone isolation while fracturing,

acidizing, cementing, testing or well head repair operations. The WR is generally set

using wireline, allowing the plug to be logged on depth and accurately placed in the

well. Conveying the plug into the well by jointed or coil tubing allows the operator to

place the plug in a deviated well where wireline or slickline is not an option.


• Simple installation and retrieval

• Built-in equalizing system

• Straight pull release

• Can be run into pressurized well utilizing a lubricator

• Will not release until equalizing valve has been shifted open

• One piece double acting slips holds plug securely against pressure from above or below

• Multiple retrieval options


Specifications

Tubing Size Tubing Weight Gauge O.D. Differential

Pressure Rating

in lb/ft in psi mm kg/m mm kPa

2-3/8 4.70 1.800

6,000

60.3 7.0 45.72

2-7/8 6.50 2.250 73.0 9.7 57.15

3-1/2 9.30 2.700 41,369 68.58

88.9 13.8 2.800 71.12

47

tel:14037203197


Gryphon CasingSolutions Products

48

Blue Cap Shoe Track System



The Gryphon Blue Cap Shoe Track System is a reliable, cost effective solution for

achieving a maximum casing integrity test and initiating intervention-less

communication with the reservoir in a cemented production string application,

without the use of a toe valve or TCP. The system is a unique design that pairs the

advantages of a wet shoe application with a shoe track system, compliant with

integrity testing and hydraulic fracturing regulatory requirements. Components

consist of top and bottom cement wiper plugs with integrated ball seats, latch-in

profile landing collar and compatible float equipment. The shoe track can be

shortened to reclaim lateral length by connecting the float components directly to

each other, allowing for stimulation of more lateral acreage. Cementing operations

are conducted as usual, launching top and bottom latch and seal wiper plugs as per

procedure, while carefully monitoring fluid displacement. Once complete, a

dissolvable ball is pumped to a seat integrated into the top wiper plug, allowing for

the desired casing test to be obtained. After a short time, the ball dissolves

completely and access to the well is regained allowing for first stage pumping

operations to begin.

The Blue Cap system can be tailored to meet specific well applications and includes

optional 5,000 or 10,000 psi (34 or 69 MPa) back pressure rated float equipment.

As an added safeguard, each wiper plug is designed to be both a top or bottom plug,

removing the risk of launching the incorrect plug.


• Reduces shoe track length increasing total production zone

• Cost effective, alternative to TCP and toe initiation valves

• Ability to achieve a 15,000 psi (103 MPa) casing integrity test

• Eliminates issue of plugging off caused by poor wiping efficiency

• Fully customizable to meet a wide variety of applications

• Available for a wide variety of casing sizes and weights

49


HBP Float Equipment



[email protected]

MINOTAUR HBP Float Collar

MINOTAUR HBP Float Shoe

The Gryphon MINOTAUR HBP line of float equipment is engineered to provide optimal shoe track integrity while preventing flowback of cement slurry in high back pressure “HBP” environments of up to 10,000 psi (69 MPa). Gryphons’ MINOTAUR HBP float equipment incorporates a unique poppet valve fabricated from high strength aluminum with full cover HNBR rubber coating. A proprietary mechanical bonding method ensures an effective non-movement seated seal, to survive high pressure and high temperature closures. The balanced flow poppet valve design allows for maximum circulation rates with less wear, insuring consistent reliability. The MINOTAUR HBP valve is available in various single or double valve float shoe and collar combinations, making it ideal for applications where casing floatation, frac sleeves, toe sleeves, and wet shoe cementing completion techniques are utilized.


• Can be supplied in various combinations and is available in all grades of steel and desired API or Premium thread connections

• Specialty engineered protected valve spring design ensures positive sealing in vertical, horizontal and deviated wells

• Performance proven, tested in-house using our precision fabricated Flow Loop, exceeding API RP 10F III C ratings

• Exceptional quality control measures, including full traceability documentation of MINOTAUR component materials

• Compatible with all mud types (WBM-OBM-SBM) • Non-cement construction • Fully PDC drillable • Reliable top fill float check valves that provide well control while running

casing

Specifications Description Imperial Metric Valve Size 2.50 in 63.5 mm

For Casing Sizes 5.0, 5-1/2, 6.0 in 127.0, 139.7, 152.4 mm Inlet Diameter 2.00 in 50.8 mm Inlet Flow Area 3.14 in2 20.26 cm2

Outlet Flow Area 4.91 in2 31.68 cm2 ** Flow Rate 10 - 12 bbls/min 1.6 - 1.9 m3/min

Valve Body & Seat Material PDC Drillable Aluminum Spring Material Phosphorus Bronze

Spring Force 5 lbs 2 kgs Service Temperature Rating 400° F 204° C

Back Pressure Rating 10,000 psi 68,948 kPa

** Tested to 16 bbls/min (2.5 m3/min)

50


Gryphon Oilfield Solutions

For more details on our products and services, contact our team of Application Specialists and Technical Representatives:

USA Corporate Headquarters Canadian Office & Distribution Center

1-800-816-720 1-800-604-1290

http://www.gryphonoilfield.com http://www.gryphonoilfield.com

mailto:[email protected] mailto:[email protected]

51

mailto:[email protected]


http://www.gryphonoilfield.com

http://www.gryphonoilfield.com



product overview - gryphonoilfield.com · and services. we specialize in aggressive well...

Documents