product guide - · pdf fileproduct guide 2014. ... ts750ptm - proven framing tool 300j up to...

PRODUCT GUIDE2014

2 www.ramset.com.au 1300 780 063

www.ramset.com.au 1300 780 063 3

Product Guide2014

Direct Fixing Tools and Accessories 4- 13

• Powder Actuated Tools 4

• Drive Pins and Powerloads 6

• Gas Technology Tools 9

• Gas Pins and Fuel Cells 11

• Electrical & Plumbing Contractor Fixing Packs 13

Power Tools and Accessories 15 - 24

• 18V & 28V Cordless Range 15

• Driver Bits and Accessories Range 17

• DynaDrill™ Rotary Hammer Range 18

• Carbide, Drill Bits and Chisels 19

• Diamond Drilling and Cutting Range 22

• Laser Measuring Devices 24

Mechanical Anchoring 25 - 34

• Concrete Nails 25

• Heavy Duty Anchors 26

• Medium Duty Anchors 28

• Light Duty Anchors and Electrical Support Fixing 32

Extreme Anchoring For Design Specification 35 - 36

Concreters And Builders Accessories 37 - 38

Chemical Anchoring 39 - 41

• ChemSet™ Injection 39

• ChemSet™ Capsules 40

• ChemSet™ Studs 41

• Applicators and Accessories 41

Construction Chemicals 42 - 45

• Sealants 42

• Packers 43

• Adhesives 43

• FomoFill™ Expanding Foams 43

• Concrete Repair and Additives, Cementitious and Epoxy Grouts 44

Fire Protection Systems and Suspension Systems 46 - 47

• Fire Protection of Pipe Penetrations 46

• Allthread Rod, Channel Profiles, Supports and Accessories 47

• Pipe Clamps and Accessories 47

• AnkaScrew™ Suspension System 47

• Anchoring Packs (Heavy Duty) 47


Product Guide2014

RAMSETTM POWDER ACTUATED FIXING TOOLS Item Code Description Impact Energy Pin Capacity Weight Power Load

JOBMASTER JobMasterTM - General Purpose Tool 350J Up to 75mm 2.2kg .22 Cartridge

Versatile – for small jobs

“Minimal maintenance – easy to dismantle & clean, to reduce downtime”

Single Shot Operation

Item Code Description Impact Energy Pin Capacity Weight Power Load

TS750P FrameMasterTM - Proven Framing Tool 300J Up to 85mm 2.5kg .27 Strip

Fast – 10 shot strip feed with automatic advance

Long Life – long life piston & buffer

Power – adjustable for use with steel or concrete


TYMASTER TyMasterTM - Dedicated Overhead Tool 320J Up to 32mm 2.3kg .27 Strip

Lightweight – reduced fatigue in overhead operation

Fully automatic – high install rate

Fast 10 shot strip feed with automatic advance


FORMMASTER FormMasterTM - High Powered Tool For Formworkers 400J Up to 100mm 3.0kg .27 Strip

Fast – 10 shot strip feed with automatic advance

Maximum Power for heavy duty applications

Large Pin capacity for thick timber fixing.


FRAMEBOSS FrameBossTM - Fully Automatic 60mm Magazine Tool 380J Up to 75mm 3.2kg .27 Strip

No manual cycling required 60mm with mag.

Easy to maintain on site

10 Pin magazine and single shot fastener guide


FRAMEBOSS75 FrameBossTM - Fully Automatic 75mm Magazine Tool 380J Up to 100mm 4.0kg .27 Strip

No manual cycling required 75mm with mag.

Easy to maintain on site

10 Pin magazine and single shot fastener guide


Product Guide2014

POWDER ACTUATED TOOL ACCESSORIES Item Code Description Pack Qty

FrameMasterTM (TS750P) PA27833 Piston Kit Standard - FrameMaster (TS750P) 1 PA27432 Piston Kit High Power - FrameMaster (TS750P) 1 PA27831 Fastener Guide Assembly - FrameMaster (TS750P) 1 PA27580 Spall Shield - FrameMaster (TS750P) 1 TyMasterTM 653116 Piston Kit Standard - TyMaster 1 PAT1085 Piston Kit High Power - TyMaster 1 653021 Buffer (x3) - TyMaster 1 653106 Fastener Guide Assembly - TyMaster 1 653035 Spall Shield - TyMaster 1 PA655901 Extension Pole - TyMaster 1 PA655902 Pole Connector - TyMaster 1 PA655903 Pole Round Connector - TyMaster 1 FormMasterTM PA28811 Piston Kit - FormMaster 1 PA312860 Buffer (x5) - FormMaster 1 PA28816 Fastener Guide Assembly - FormMaster 1 PA310000 Spall Shield - FormMaster 1 FrameBossTM PA37037 Piston 1 011483 Piston Return Spring (x1) 1 010983 Piston Insulation Ring (x2) 1 PA37040 Fastener Guide Assembly 1 PA37038 Magazine Assembly 1 PA37023 Spall Guard 1 PA11030 Insulation Fastener Adaptor Kit 1 FrameBossTM 75 PA37041 Piston 1 011483 Piston Return Spring (x1) 1 010983 Piston Insulation Ring (x2) 1 PA37063 Fastener Guide Assembly 1 PA37049 Magazine Assembly 1 PA37023 Spall Guard 1 Accessories PA1613 Safety Glasses 1 PA9333 Tool Maintenance Kit 1 PBT Pin Breaker Tool 1 PAWS8 Safety Warning Sign 1 PA9316 Lubricating & Releasing Oil 1


Product Guide2014

FASTENERS & ASSEMBLIES FOR CURRENT RAMSET TOOLS DRIVE PINS FOR USE WITH FrameBoss™, FrameMaster™ (TS750P), FormMaster™ & JobMaster™

Item Code Shank Length (mm) Head Diameter (mm) Pack Qty

LDU25 25 8 100 LDU32 32 8 100 LDU38 38 8 100 LDU50 50 8 100 LDU57 57 8 100 LDU65 65 8 100 LDU75 75 8 100 LDU90 90 8 100 LDU99 100 8 100

COLLATED DRIVE PINSFOR USE WITH FrameBossTM


C925C 25 9 500 C930C 30 9 500 C940C 40 9 300 C950C 50 9 300 C960C 60 9 300* C975C 75 9 300* For use with FRAMEBOSS75 only

TIMBER FORMWORK PINS FOR USE WITH FormMasterTM & FrameMasterTM (TS750P)


LDU75F 75 5 200 LDU99F 99 5 200

SPECIALIST PINS FOR FIXING TO STRUCTURAL STEEL Item Code Description Pack Qty

SP12 Pin for fixing track to steel 100 SC925 Pin for fixing to steel 100 SC930 Pin for fixing to steel 100 SC940 Pin for fixing to steel 100 SC950 Pin for fixing 35mm timber to steel 100 SC960 Pin for fixing 45mm timber to steel 100 SC970 Pin for fixing to steel 100 SC950W Washered Pin for fixing 35mm timber to steel 100 SC960W Washered Pin for fixing 45mm timber to steel 100

SPECIALIST COLLATED PINS FOR FIXING TO STRUCTURAL STEEL & HARD CONCRETE FOR USE WITH FrameBossTM


SC925C 25 9 500 SC930C 30 9 500 SC940C 40 9 300 SC950C 50 9 300 SC960C 60 9 300

SACRIFICIAL FORMWORK PINS FOR USE WITH FrameBossTM, FormMasterTM & JobMasterTM

Item Code Description Pack Qty

SBR9 20mm Pin for Steel with 14mm Washer 100


Product Guide2014

WASHERED PIN ASSEMBLIES Item Code Shank Length (mm) Washer Diameter (mm) Pack Qty

LWU25 25 22 100 LWU32 32 22 100 LWU25K 25 Knurled 16 100 LWU75 75 16 100

ANGLE CLIP (CATINERY BRACKET) PIN ASSEMBLIES Item Code Shank Length (mm) Head Diameter (mm) Pack Qty

LAU25 25 8 100 LAU30H 30 8 100

INSULATION FASTENERS FOR USE WITH InsulFastTM P.A. TOOL

Item Code Insulation Thickness (mm) Pack Qty

CI650 50 200 CI670 70 - 75 200 CI6100 90 - 100 100 CI960 60 - 65 100

INSULATION FASTENERS Item Code Max. Insulation Thickness (mm) Pack Qty

CR950P 25 200

CANE BIN ASSEMBLIES 25 mm PIN Item Code Description Pack Qty

LC825 25 mm Double Clip 500

POWDER ACTUATED ACCESSORIES - CLIPS Item Code Description Pack Qty

RCA25F Angle (Ramclip) 100

WASHERS (DISCS) FOR USE WITH STANDARD P.A. PINS

Item Code Disc Diameter Disc Hole Diameter (mm) Pack Qty

RCD16F 16mm (5/8”) 5 100

ELECTRICAL / PLUMBING FIXING PRODUCTS Item Code Description Pack Qty

LZU30H PA Threaded Rod Hanger - M10 100

FASTENERS & ASSEMBLIES FOR PREVIOUS RAMSET TOOLS DRIVE PINS FOR J20, J10 & J20S


HDB50 50 6 100 HDB64 64 6 100 HDB75 75 6 100 HDB95 95 6 100


Product Guide2014

DRIVE PINS FOR USE WITH OTHER MAGAZINE TOOLS Item Code Shank Length (mm) Head Diameter (mm) Pack Qty

RHC22 22 8 100 RHC52 52 8 100 RHC62 62 8 100 RHC72 72 8 100

POWERLOADS FOR RAMSET POWDER ACTUATED FIXING TOOLS

STRIP POWERLOADS .27 calibre FOR USE WITH FrameBoss™, FrameMaster™ (TS750P), FormMaster™, TyMaster, Rocket, Striker, S75A, & TS750. (TS60P)

Item Code Strength Colour Pack Qty

PLSGR22 Weak Green 100 PLSYW22 Medium Yellow 100 PLSRD22 Strong Red 100

SHORT SERIES POWERLOADS .22 calibre FOR USE WITH JobMaster™


PLCGR22S Weak Green 100 PLCYW22S Medium Yellow 100 PLCRD22S Strong Red 100

DISC POWERLOADS .25 calibre FOR USE WITH InsulFast™


PLDYW25 Medium Yellow 100

DISC POWERLOADS .25 calibre FOR USE WITH D200, D90 & D60


PLDYW25 Medium Yellow 100 PLDRD25L Strong Red 100

POWERLOADS .22 calibre FOR USE WITH J20S & J20


PLCGR22S Weak Green 100 PLCYW22S Medium Yellow 100 PLCRD22S Strong Red 100 PLCPU22S Very Strong Purple 100


Product Guide2014

GAS TECHNOLOGY TOOLS Item Code Description Impact Energy Magazine Capacity Weight Pin Capacity

CABLEMASTER800 CableMasterTM 800 - Pulsa 800 Tech. 82J 20 Pin 3.8kg 15-40mm For Electrical & Plumbing

Fuel Cell and Battery Gauge on tool

“Lithium Battery – Fast Charge, Long Life”

Tool-less Depth of Drive Adjustment

Item Code Description Impact Energy Magazine Capacity Weight Pin Capacity

TRAKFAST800 TrakFastTM - Pulsa 800 Technology for Track & Mesh 100J 50 Pin 3.9kg 15-40mm

Fuel Cell and Battery Gauge on tool

“Lithium Battery – Fast Charge, Long Life”

Tool-less Depth of Drive Adjustment


T3IF InsulFastTM GT3-Insulation Fixing Tool 100J N/A 3.5kg 25-100mm

Virtually no recoil! Insulation Pins

3 times less cocking force required than explosive powered tools

Faster install than explosive powered tools - lower in place cost


TF1200 TrakFastTM - Original Track Fixing Tool 77J 40 Pin 3.8kg 13-38mm

Off Position to prevent draining the battery when tool is not in use

Mechanical fuel injection

Low maintenance


TRAKMASTER TrakMasterTM - Pulsa Technology for Track & Mesh 82J 20 Pin 3.7kg 15-40mm

Flared fastener guide designed for partitioning track work

5kg actuation force

Depth-of-drive (indicated on top of the tool)


CABLEMASTER CableMasterTM - Pulsa Tech. For Electrical & Plumbing 82J 20 Pin 3.7kg 15-40mm

Fastener guide designed for mechanical and electrical contract work

Much faster than the traditional drill and anchor method

Sequential actuation - safe operation


Product Guide2014

GAS TECHNOLOGY FIXING TOOL ACCESSORIES Item Code Description Pack Qty

TrakFastTM 800 - TRAKFAST800 / CableMasterTM 800 - CABLEMASTER800 018545 Lithium Battery - TrakFast 800 / CableMaster 800 1 018546 Battery Charger (includes power supply) 1 018543 20 Pin Magazine 1 018544 50 Pin Magazine 1 014641 Magnetic Washer Adaptor - TrakFast 800 1

InsulFastTM GT3 - T3IF / TrakFastTM - TF1200 B0092 Battery - TrakFast (TF1200) 1 B0020 Battery Charger - TF1200 (requires power supply) 1 TFPS Battery Charger Power Supply (TF1200) 1

TrakMasterTM TMBP Battery - TrakMaster / CableMaster / InsulFastGT2 1 TMBC Battery Charger (requires power supply) 1 TMBCPS Battery Charger Power Supply 1 337700 Fastener Guide - TrakMaster 1 333700 Magnetic Washer Adaptor - TrakMaster 1 900507 In - Car Charger Lead 1 010670 40 Pin Magazine - TrakMaster 1 CableMasterTM TMBP Battery - TrakMaster / CableMaster / InsulFastGT2 1 TMBC Battery Charger (requires power supply) 1 TMBCPS Battery Charger Power Supply 1 336800 Fastener Guide - CableMaster 1 900507 In - Car Charger Lead 1 CSA2025 CableMaster Saddle adapt 20/25mm 1 CSA1632 CableMaster Saddle adapt 16/32mm 1 PULSALIFT PulsaLift Pole Tool (2.4m - 3.8m Working Height) 1 TrakFastTM - TF1100 B20542 Battery - TrakFast - TF1100 1 TFBC Battery Charger - TrakFast TF1100 (requires power supply) 1 TMBCPS Battery Charger Power Supply 1 Common Accessories PA1613 Safety Glasses 1 B20544L Gas Tool Degreaser / Lubricant 1

ACCESSORIES TO SUIT MAGNETIC WASHER ADAPTOR Item Code Shank Length (mm) Pack Qty

011204 25mm Washers 1000


Product Guide2014

TRAKFAST800 / CABLEMASTER800 PINS & FUEL PACKS STANDARD DUTY Item Code Shank Length (mm) Pack Qty

P8C620 20 500 P8C625 25 500 P8C630 30 500 P8C635 35 500

TRAKMASTER / CABLEMASTER PINS & FUEL PACKS - STANDARD DUTY Item Code Shank Length (mm) Pack Qty

C620 20 500 C625 25 500 C630 30 500 C635 35 500

TRAKFAST800 / CABLEMASTER800 PINS & FUEL PACKS HEAVY DUTY FOR STEEL AND HARD CONCRETE Item Code Description / Shank Length (mm) Pack Qty

P8HC615 Heavy Duty Steel/Concrete - 15mm 500 P8HC617 Premium Hard Concrete & Steel 17mm 500 P8HC622 Premium Hard Concrete & Steel 22mm 500

TRAKMASTER / CABLEMASTER PINS & FUEL PACKS HEAVY DUTY FOR STEEL AND HARD CONCRETE Item Code Description / Shank Length (mm) Pack Qty

HC615 Heavy Duty Steel/Concrete - 15mm 500 SC620 Heavy Duty Steel/Concrete - 20mm 500 HC617 Premium Hard Concrete & Steel 17mm 500 HC622 Premium Hard Concrete & Steel 22mm 500 HC632 Premium Hard Concrete & Steel 32mm 500

SPIRAL KNURLED PINS FOR FIXING PLYWOOD TO STEEL Item Code Description / Shank Length (mm) Pack Qty

P8PLY138 Hard Steel Spiral Knurled Pins (TRAKFAST800) 1000 PLY138P Hard Steel Spiral Knurled Pins (TRAKMASTER) 1000

CABLEMASTER PINS & FUEL PACKS SPECIALIST SOFT WASHERED PINS FOR PVC FITTINGS Item Code Description / Shank Length (mm) Pack Qty

CG620 Soft Washered Pins - 20mm 500

TRAKFAST PINS (TF1200, TF1100) & FUEL PACKS - STANDARD DUTY Item Code Shank Length (mm) Pack Qty

FPP012 13 1000 FPP034B 19 1000 FPP100 25 1000 FPP114 32 1000


Product Guide2014

TRAKFAST PINS (TF1200, TF1100) & FUEL PACKS - HEAVY DUTY Item Code Shank Length (mm) Pack Qty

FPP012S 13 1000

TRAKFAST (TF1200, TF1100) BREAKAWAY PINS & FUEL PACKS Item Code Description Pack Qty

FPP034T 19 1000 FPP100T 25 1000 FPP112T 38 1000

FUEL PACKS Item Code Description Pack Qty

TFGAS TrakFast Fuel Cell Pack 6 035420 Pulsa 700 Fuel cell - CableMaster / TrakMaster 1

INSULFAST GT3 (T3IF) FASTENERS Item Code Description Length Pack Qty

T3IG625 White 25mm 400 T3IG625B Black 25mm 400 T3IG625G Grey 25mm 400 T3IG638 White 38mm 350 T3IG638G Grey 38mm 350 T3IG650 White 50mm 300 T3IG650B Black 50mm 300 T3IG663 White 63mm 500 T3IG675 White 75mm 250 T3IG675B Black 75mm 250 T3IG6100 White 100mm 200

INSULFAST GT FASTENERS Item Code Description Length Pack Qty

IG625 White 25mm 400 IG625B Black 25mm 400 IG625G Grey 25mm 400 IG638 White 38mm 350 IG638G Grey 38mm 350 IG650 White 50mm 300 IG650B Black 50mm 300 IG663 White 63mm 500 IG675 White 75mm 250 IG675B Black 75mm 250 IG6100 White 100mm 200


Product Guide2014

CABLEMASTER800 ELECTRICAL CONTRACTOR PACKS Item Code Description Pack Qty

P8CPGCL Contractor Pack - ClipElec 500 P8CPGCLHC617 Contractor Pack - ClipElec + Hard Conc. Pins 17mm 500 P8CPGDLHC617 Contractor Pack - DataLec Clip + Hard Conc. Pins 17mm 500 P8CPGDLHC622 Contractor Pack - DataLec Clip + Hard Conc. Pins 22mm 500 P8CPGCH Contractor Pack - Double CableHorn 125 P8CPGCH140 Contractor Pack - Single CableHorn 200 P8CPGCT Contractor Pack - CTCLIP 500 P8CPGDAS20 C/Pack - Direct Align H/saddle 20mm 400 P8CPGDAS25 C/Pack - Direct Align H/saddle 25mm 400 P8CPGEC16 Contractor Pack - ECLIP16 500 P8CPGEC20 Contractor Pack - ECLIP20 500 P8CPGEC25 Contractor Pack - ECLIP25 500 P8CPGFP02 Contractor Pack - FP FireFixTM 7 to 8mm 500 P8CPGFP04 Contractor Pack - FP FireFixTM 8 to 9.5mm 500 P8CPGTRH Contractor Pack - Threaded Rod Brkt. 400 P8CPGCWB Contractor Pack - Catinary Wire Brkt. 400

For use with CableMaster 800* Contractor Packs contain electrical clips, pins, fuel cells and cable ties where applicable.

ClipElec™

DataLec Clip™

Double CableHorn™

Single Cablehorn™

CTCLIP™

Direct Align Saddle™

ECLIP™

FP FireFix™

Threaded RodHanger™

Catinary WireBracket™


Product Guide2014

CABLEMASTER ELECTRICAL CONTRACTOR PACKS Item Code Description Pack Qty

CPGCL Contractor Pack - ClipElec 500 CPGCLHC617 Contractor Pack - ClipElec + Hard Conc. Pins 17mm 500 CPGCLHC622 Contractor Pack - ClipElec + Hard Conc. Pins 22mm 500 CPGDLHC617 Contractor Pack - DataLec Clip + Hard Conc. Pins 17mm 500 CPGDLHC622 Contractor Pack - DataLec Clip + Hard Conc. Pins 22mm 500 CPGCH Contractor Pack - Double CableHorn 125 CPGCH140 Contractor Pack - Single CableHorn 200 CPGCT Contractor Pack - CTCLIP 500 CPGDAS20 C/Pack - Direct Align H/saddle 20mm 400 CPGDAS25 C/Pack - Direct Align H/saddle 25mm 400 CPGEC16 Contractor Pack - ECLIP16 500 CPGEC20 Contractor Pack - ECLIP20 500 CPGEC25 Contractor Pack - ECLIP25 500 CPGFP02 Contractor Pack - FP FireFixTM 7 to 8mm 500 CPGFP04 Contractor Pack - FP FireFIxTM 8 to 9.5mm 500 CPGTRH Contractor Pack - Threaded Rod Brkt. 400 CPGCWB Contractor Pack - Catinary Wire Brkt. 400

CABLEMASTER & CABLEMASTER 800 ELECTRICAL CLIPS Item Code Description Pack Qty

CLIPELEC ClipeLec & Cable tie 100 CTCLIP One piece Clip w/tie 100 ECLIP20 Snap-on Conduit clip 20mm 100 ECLIP25 Snap-on Conduit clip 25mm 100 TRH0810 Threaded Rod Hanger M8/M10 100 CWBKT Catinary Wire Bracket Assy. 100 SPMW Strap & Plate Mounting Washer 500

For use with Cablemaster™* Contractor Packs contain electrical clips, pins, fuel cells and cable ties where applicable.

ClipElec™

DataLec Clip™

Double CableHorn™

Single CableHorn™

CTCLIP™

Saddle™

ECLIP™

FP FireFix™

Catinary WireBracket™


Product Guide2014

POWER TOOLS AND ACCESSORIES18V LITHIUM-ION CORDLESS RANGE Item Code Description Impact Force Max Drill Dia Carbide Pack QtyCRHR18 18V Cordless Rotary Hammer 2.7J 20 R3 Plus 1

Three mode cordless rotary hammer U3 Plus

Enhanced anti vibration system provides maximum operator comfort

Variable position chisel stop

Item Code Description Max. Torque Max Drill Dia (Steel) Torque Settings Pack QtyCHDDR18 18V Cordless Hammer Drill / Driver 75Nm 13mm 24 1

Four pole frameless motor generating impressive torque

Two speed drill with 24 stage torque adjustment

Variable speed trigger for enhanced control

Item Code Description Max Speed Max Disc Dia Pack QtyCAGR18 18V Cordless Angle Grinder 9000rpm 115mm 1

Four pole frameless motor delivers 9000rpm

Paddle switch design mechanism increases control and comfort

Dead man switch for added safety

Item Code Description Drive Shank Max. Torque Pack QtyCIWR18 18V Cordless Impact Wrench “1/2”” Sq.” 610Nm 1

Heavy duty impact wrench with a massive 610Nm of torque

Dynamic brake stops unit immediately after switch is released for fast socket changes

Magnesium gear case for added durability and lighter weight

Item Code Description Drive Shank Max. Torque Pack QtyCIDR18 18V Cordless Impact Driver “1/4”” Hex” 158Nm 1

Four pole frameless motor delivers 158Nm of torque

LED lighting for working in dark spaces

All metal gear and impact mechanism

Item Code Description Max Disp Rate Max Disp Force Pack QtyCUAR18 18V Cordless Applicator 533ml / min 430kg 1

Six position adjustable speed control

Anti-drip mechanism instantly stops material dripping upon trigger release

Variable speed trigger for enhanced control

Item Code Description Pack QtyCBATR18 18V Battery 3.0Ah 1

CBATR18HD 18V Battery 4.0Ah 1

CCR18 18V Battery Charger 1

CKITBAG Cordless Tool Bag 1

CBASEKITR18 “18V Base Kit (2 x CBATR18HD, 1 x CCR18, 1 x CKITBAG)” 1


Product Guide2014

28V LITHIUM-ION CORDLESS RANGE Item Code Description Impact Force Max Drill Dia Carbide Pack Qty

CRHR28 28V Cordless Rotary Hammer 3.2J 26 R3 Plus 1

Three mode cordless rotary hammer U3 Plus

High speed / maximum impact energy with safety clutch

L-shape construction for perfect balance and control

Item Code Description Pack Qty

CBATR28 28V Battery 3.0Ah 1

CCR28 28V Battery Charger 1

CKITBAG Cordless Tool Bag 1

CBASEKITR28 “28V Base Kit (2 x CBATR28, 1 x CCR28, 1 x CKITBAG)” 1


Product Guide2014

DRIVERS BITS & ACCESSORIES Item Code Driver Type Pack Qty

HDPH02025 #2 PH x 25 mm 10 HDPH02050 #2 PH x 50 mm 10 HDPH02100 #2 PH x 100 mm 10 Item Code Driver Type Pack Qty

HDUN05050 Hex Drv. Mag 5/16” x 50 mm 10 HDUN05065 Hex Drv. Mag 5/16” x 65 mm 10 HDUN06065 Hex Drv. Mag 3/8” x 65 mm 10 Item Code Driver Type Pack Qty

IS12010 10mm Impact Socket 1 IS12013 13mm Impact Socket 1 IS12015 15mm Impact Socket 1 IS12016 16mm Impact Socket 1 IS12017 17mm Impact Socket 1 IS12018 18mm Impact Socket 1 S12019 19mm Impact Socket 1 Item Code Driver Type Pack Qty

ISD12010 10mm Long Impact Socket 1 ISD12013 13mm Long Impact Socket 1 ISD12015 15mm Long Impact Socket 1 ISD12016 16mm Long Impact Socket 1 ISD12017 17mm Long Impact Socket 1 ISD12018 18mm Long Impact Socket 1 ISD12019 19mm Long Impact Socket 1 921556 SDS - 1/2” Drive Socket Adaptor 1


Product Guide2014

DynaDrill™ ROTARY & DEMOLITION HAMMERSItem Code Description Power Impact Force Max Drill Dia Carbide

DD522 DynaDrill™ 2kg Combi Hammer 790W 2.7J 24mm R3 Plus

Block construction, reliable & durable housing U3 Plus

Forward & reverse function

Chisel function

Item Code Description Power Impact Force Max Drill Dia Carbide


Superb drilling rate and chiseling performance U3 Plus

Substantially improved vibration reduction

Quick change chuck system



Low vibration due to Ramset Vibration Control (RVC) U3 Plus

Balanced weight distribution through L shape design




Vibration dampening mechanisms for smooth operation (RVC) U3 Plus

In-built safety clutch providing operator protection



DD565 DynaDrill™ 6kg Combi Hammer 1100W 10.0J 40mm R3 Max

High removal rates, excellent performance / weight ratio U3 Max

Safety clutch system allows continous drilling in toughest materials

Horizontal and vertical drilling level gauge for accurate drilling


DD576 DynaDrill™ 7kg Combi Hammer 1350W 15.0J 45mm R3 Max

Powerful and robust hammer for large diameter holes and concrete breaking U3 Max

Safety clutch providing operator protection

Tool holder adjustment - 12 positions

Item Code Description Power Impact Force Max Drill Dia Chisels

DD610 DynaDrill™ 10kg Demolition Hammer 1500W 25.0J R3 Max

Impact force adjustable through 6 levels to match base materials and application

Multi position tool holder

Fixed position power switch


Product Guide2014

U3TM PLUS TRI-CUTTER CARBIDE TIPPED DRILL BITS Item Code Diameter Work Length (mm) x Total length (mm) Pack Qty

DDU305050 5 50 x 110 1 DDU305100 5 100 x 160 1 DDU306050 6 50 x 110 1 DDU306100 6 100 x 160 1 DDU306150 6 150 x 210 1 DDU306050X3 1/4” 50 x 110 1 DDU306100X3 1/4” 100 x 160 1 DDU306150X3 1/4” 150 x 210 1 DDU308100 8 100 x 160 1 DDU308150 8 150 x 210 1 DDU310100 10 100 x 160 1 DDU310200 10 200 x 260 1 DDU312150 12 150 x 210 1 DDU312250 12 250 x 310 1 DDU313200 13 200 x 250 1 DDU314200 14 200 x 250 1 DDU316200 16 200 x 250 1

R3TM PLUS CARBIDE TIPPED DRILL BITS Item Code Diameter Work Length (mm) x Total length (mm) Pack Qty

DDR305050 5 50 x 110 1 DDR305100 5 100 x 160 1 DDR305065X5 5.5 80 x 140 1 DDR305125X5 5.5 150 x 210 1 DDR306050 6 50 x 110 1 DDR306100 6 100 x 160 1 DDR306150 6 150 x 210 1 DDR306050X3 1/4” 50 x 110 1 DDR306100X3 1/4” 100 x 160 1 DDR306150X3 1/4” 150 x 210 1 DDR307065 7 100 x 160 1 DDR308065 8 100 x 160 1 DDR308150 8 150 x 210 1 DDR310100 10 100 x 160 1 DDR310180 10 200 x 260 1 DDR310400 10 400 x 460 1 DDR312125 12 150 x 210 1 DDR312250 12 250 x 310 1 DDR312400 12 400 x 460 1 DDR312125X7 1/2” 150 x 210 1 DDR314200 14 200 x 250 1 DDR315150 15 150 x 200 1 DDR316125 16 150 x 200 1 DDR316200 16 200 x 250 1 DDR316400 16 400 x 450 1

R3TM PLUS Y-CUTTER CARBIDE TIPPED DRILL BITS Item Code Diameter Work Length (mm) x Total length (mm) Pack Qty

DQR316200 16 250 x 300 1 DQR316400 16 400 x 450 1 DQR318200 18 200 x 250 1 DQR318400 18 400 x 460 1 DQR319250 19 250 x 310 1 DQR320200 20 200 x 250 1 DQR320400 20 400 x 450 1 DQR322200 22 200 x 250 1 DQR322400 22 400 x 450 1 DQR324200 24 200 x 250 1 DQR324400 24 400 x 450 1 DQR325400 25 400 x 450 1 DQR326200 26 250 x 300 1 DQR326400 26 400 x 450 1


Product Guide2014

U3TM MAX TRI-CUTTER CARBIDE TIPPED DRILL BITS Item Code Diameter Work Length (mm) x Total length (mm) Pack Qty

DDUM12200 12 200 x 340 1 DDUM12400 12 400 x 540 1 DDUM14200 14 200 x 340 1 DDUM14400 14 400 x 540 1 DDUM16200 16 200 x 340 1 DDUM16400 16 400 x 540 1

R3TM MAX Y-CUTTER CARBIDE TIPPED DRILL BITS Item Code Diameter Work Length (mm) x Total length (mm) Pack Qty

DDYM18200 18 250 x 390 1 DDYM18400 18 400 x 540 1 DDYM19195 19 195 x 350 1 DDYM20200 20 200 x 320 1 DDYM20400 20 400 x 520 1 DDYM20800 20 800 x 920 1 DDYM22200 22 200 x 320 1 DDYM22400 22 400 x 520 1 DDYM22800 22 800 x 920 1 DDYM24200 24 200 x 320 1 DDYM24400 24 400 x 520 1 DDYM25400 25 400 x 520 1 DDYM25800 25 800 x 920 1 DDYM26400 26 400 x 520 1 DDYM28400 28 400 x 520 1 DDYM28800 28 800 x 920 1 DDYM30400 30 400 x 520 1 DDYM32400 32 400 x 520 1 DDYM32800 32 800 x 920 1 DDYM35400 35 400 x 520 1 DDYM38400 38 400 x 520 1 DDYM40400 40 400 x 520 1

CHISELS - R3TM PLUS Item Code Total Length (mm) Type Pack Qty

DHR3PCS 250 Point 1 DHR3FCS 250 20 mm Flat 1 DHR3SC040 250 40 mm Spade 1

CHISELS - R3TM MAX Item Code Total Length (mm) Type Pack Qty

DHSMPCS 280 Point 1 DHSMPCM 400 Point 1 DHSMPCL 600 Point 1 DHSMFCS 280 25mm Flat 1 DHSMFCM 400 25mm Flat 1 DHSMFCL 600 25mm Flat 1 DHSMSC050 400 50mm Spade 1 DHSMSC080 300 50mm Spade 1 DHSMSC115 300 115mm Spade 1

CORE BIT & STAR CUTTER RATIO SYSTEMS Item Code Diameter (mm) Description Pack Qty

DDHR12150 12 Pilot Bit 1 DCHR050 50 Core Bit 1 DCHR065 65 Core Bit 1 DCHR080 80 Core Bit 1 DCHR100 100 Core Bit 1 DAHR25280 - Extension 1 DASMHR - Adapt. R3 Max 1 DAR3HR - Adapt. R3 Plus 1


Product Guide2014

UNDERCUT SAFETY ANCHORING SYSTEM - Shouldered Carbide Drill Bit Item Code Drill Hole Diam Drill Type x Length (mm) Pack Qty

PH360258MAX 36mm Shoulder Carbide 4 cutter x 258mm (SDS Max) 1 PH305205MAX 30.5mm Shoulder Carbide 4 cutter x 205mm (SDS Max) 1 PH225146SDS 22.5mm Shoulder Carbide 4 cutter x 146mm (SDS Plus) 1 PH200120SDS 20mm Shoulder Carbide 4 cutter x 120mm (SDS Plus) 1

UNDERCUT SAFETY ANCHORING SYSTEM - Undercut Hole Tool Item Code Suits Hole Diam Drill Type x Length (mm) Pack Qty

UC360MAX 36mm Undercut Tool (SDS Max) for M20x240mm Anchor 1 UC305MAX 30.5mm Undercut Tool (SDS Max) for M16x190mm Anchor 1 UC225SDS 22.5mm Undercut Tool (SDS Plus) for M12x135mm Anchor 1 UC200SDS 20mm Undercut Tool (SDS Plus) for M10x110mm Anchor 1

UNDERCUT SAFETY ANCHORING SYSTEM - Replacement cutter blade for Undercut tool Item Code Description Pack Qty

BL360 Replacement cutter blade for UC360MAX 1 BL305 Replacement cutter blade for UC305MAX 1 BL225 Replacement cutter blade for UC225SDS 1 BL200 Replacement cutter blade for UC200SDS 1

DYNADRILLTM ACCESSORIES Item Code Description Pack Qty.

054288 Quick Fit Keyless Chuck For DD529, DD533 and DD544 Combi Hammer 1 DAR3DH Chuck Adaptor - R3 Plus 1 DAR3HR Adaptor Ratio - R3 Plus 1 DASMR3 Adaptor R3 Max - R3 Plus 1


Product Guide2014

DIAMOND DRILLING DIAMOND DRILLING MACHINES Item Code Description Pack Qty

RM160 RM160 Driling Machine 1 RM250 RM250 Drilling Machine 1 623003 RM350 Drilling Machine 1 TRIX160 Small Diamond Drilling Rig 1 TRIX350 Large Diamond Drilling Rig 1 AC1630P 30L Wet & Dry Vacuum Cleaner (Permanent Clean) 1 RM160KIT Diamond Drilling kit RM160 1

DIAMOND DRILLING CORE BITS - WET Item Code Length (mm) Diameter (mm) Pack Qty

1/2” BSP Thread DCDS14300 300 14 1 DCDS16300 300 16 1 DCDS18300 300 18 1 DCDS20300 300 20 1 DCDS24300 300 24 1 DCDS26300 300 26 1 DCDS32300 300 32 1 DCDS35300 300 35 1 DCDS40300 300 40 1 DCDS45300 300 45 1 DCDS52300 300 52 1 1 1/4” UNC DCDL52450 450 52 1 DCDL66450 450 66 1 DCDL76450 450 76 1 DCDL82450 450 82 1 DCDL91450 450 91 1 DCDL101450 450 101 1 DCDL116450 450 116 1 DCDL121450 450 121 1 DCDL126450 450 126 1 DCDL131450 450 131 1 DCDL142450 450 142 1 DCDL151450 450 151 1Other core sizes (150 - 350) are available on request. please consult your Ramset™ representative for advice.

DIAMOND DRY CUTTING MACHINE Item Code Description Pack Qty

RW150E Concrete Chaser 1

RM160

RM250

623006

AC1630P

TRIX160TRIX350

RM160KIT


Product Guide2014

DIAMOND DRILLING ACCESSORIES Item Code Description Pack Qty

SDP1 Vacuum Pump 200W 1 623030 Vacuum Tank 5L 1 623430 Connection Plate (RM250) 1 624753 Dovetail Adaptor (TRIX160) 1 624755 Adaptor Set Kit 32 (TRIX160) 1 624025 Vacuum Set for TRIX160 Rig 1 624026 Vacuum Set for TRIX350 Rig 1 622220 Quick Release Connector Bolts 1 172710 Portable Water Supply Unit 1 624019 Water Collector for TRIX160 Rig 1 624020 Membranes to suit TRIX160 Water Collector 5 624022 Water Collector for TRIX350 Rig 1 624023 Membranes to suit TRIX350 Water Collector 5 622200 Sharpening Plate 1 622020 Extension Rod 1/2” x 300mm 1 622070 Extension Rod 1 1/4” x 400mm 1 172770 Kit with 5 Copper Rings 1 620922 Vacuum Dust Bags (Pack of 3) 1 644004 5 metre Antistatic Hose 1 644006 Filter Kit for R1600-50 Vacuum 1 644030 Accessory Kit for R1600-50 Vacuum 1

INDUSTRIAL ANGLE GRINDERS Item Code Description Pack Qty

RGS125AV Angle Grinder (1050W) 125 mm 1 RGP125AV Angle Grinder (1400W) 125 mm 1 RGP230AV Angle Grinder (2400W) 230 mm 1 SG125E Concrete Grinder 125mm 1 DHG125 Dust Hood Grinding (RGP125AV) 1 610980 Dust Hood Grinding (RGP230AV) 1 610999 Dust Hood Cutting (RGP230AV) 1

DIAMOND CUTTING BLADES Item Code Diameter (mm) Description Pack Qty

848295 125 Xtreme Concrete 1 848296 125 Xtreme Universal (Pack of 2) 2 848297 230 Xtreme Concrete 1 848298 125 Xtreme Universal 1 848299 230 Xtreme Universal 1

DIAMOND CUP WHEELS Item Code Diameter (mm) Description Pack Qty

610492 125 Turbo Hard 1 610477 125 Single Row Hard 1 610472 125 Double Row Hard 1 610494 125 Superturbo Hard 1


Product Guide2014

CUT OFF WHEELS Item Code Diameter (mm) x Bore (mm) Description Pack Qty

CW100M 102 x 3.2 Cutoff Wheel-Masonry 25 CW115M 115 x 3.2 Cutoff Wheel-Masonry 25 CW125M 125 x 3.2 Cutoff Wheel-Masonry 25 CW180M 180 x 3.2 Cutoff Wheel-Masonry 25 CW230M 230 x 3.2 Cutoff Wheel-Masonry 25 CW100S 102 x 2.2 Cutoff Wheel-Steel 25 CW115S 115 x 2.2 Cutoff Wheel-Steel 25 CW125S 125 x 2.2 Cutoff Wheel-Steel 25 CW180S 180 x 2.2 Cutoff Wheel-Steel 25 CW230S 230 x 2.2 Cutoff Wheel-Steel 25 CW100SU 102 x 1.0 Cutoff Wheel-Steel INOX 25 CW115SU 115 x 1.0 Cutoff Wheel-Steel INOX 25 CW125SU 125 x 1.0 Cutoff Wheel-Steel INOX 25

GRINDING WHEELS Item Code Diameter (mm) x Description Pack Qty Width (mm) x Bore (mm)

GW100S 100 x 6.4 Grinding Wheel-Steel 25 GW115S 115 x 6.4 Grinding Wheel-Steel 25 GW125S 125 x 6.4 Grinding Wheel-Steel 25 GW180S 180 x 6.4 Grinding Wheel-Steel 25 GW230S 230 x 6.4 Grinding Wheel-Steel 25

LASER LEVELLING TOOLS Item Code Description Pack Qty

RL300 Rotating Laser 1 RL200G Rotating Laser - Green 1 RLML Multi-Liner Laser 1 RLCP Cross-Pointer Laser 1 RLCL Cross Line Laser 1 EL80 Easy Laser Distance Measurer 1 FS30XS Premium Tripod 1 RLTP Tripod 1 RST5 Laser Measuring Staff 5M 1 RFSP Laser Floor to Ceiling Pillar 1 RWCM Laser Wall / Ceiling Mount 1

RL300

RL200G

RLML

RLCP

RLCL

EL80


Product Guide2014

MECHANICAL ANCHORING CONCRETE NAILS Item Code Size (mm) Length (mm) Pack Qty

CW415 2.4 15 100 CW415Q500 2.4 15 500 CW420 2.4 20 100 CW420Q500 2.4 20 500 CD425 2.4 25 100 CW425 2.4 25 100 CW425Q500 2.4 25 500 CD430 2.4 30 100 CW430 2.4 30 100 CW430Q500 2.4 30 500 CD440 2.4 40 100 CW440 2.4 40 100 CD525 3.2 25 100 CK540 3.2 38 100 CD540 3.2 40 100 CF650 3.8 50 100 CF660 3.8 60 100 CF675 3.8 75 100 CK750 3.6 50 100 CK760 4.0 63 100 CK775 4.2 75 100

CK - Striated CF - Plain Shank

CW - Washered

CD- Plain Shank


Product Guide2014

MECHANICAL ANCHORING HEAVY DUTY ANCHORS SpaTecTM Plus SAFETY ANCHORS Item Code Drilled Hole Dia ø (mm) Anchor Length (mm) x Thread Size (mm) Pack Qty

l SP10105 15 105 x M10 25l SP10105F 15 105 x M10 25u SP10110SS* 15 110 x M10 25l SP12105 18 105 x M12 25l SP12120 18 120 x M12 25l SP12120F 18 120 x M12 25u SP12120SS* 18 120 x M12 25l SP16145 24 145 x M16 10u SP16145ESS#* 24 145 x M16 10l SP20170 28 170 x M20 5# For Spatec Plus Hex nut (zinc finish) safety anchors go to page 36 * Available to order. Lead times apply.

BoaTM Coil ANCHORS - COMPLETE Item Code Anchor Size Anchor Length (mm) Pack Qty

l BAC08075 1/2”/13 mm 75 50l BAC08100 1/2”/13 mm 100 25l BAC10090 5/8”/16 mm 90 25l BAC10125 5/8”/16 mm 125 25l BAC12115 3/4”/19 mm 115 20

BoaTM Coil ANCHORS - COIL ONLY Item Code Anchor Size Pack Qty

l BAC08 1/2”/13 mm 100l BAC10 5/8”/16 mm 50l BAC12 3/4”/19 mm 50

l Carbon Steel Zinc Plated u Stainless Steel 316 n Hot Dipped Galvanised t Mechanically Galvanised


Product Guide2014


TruBoltTM ANCHORS Part No. Thread Size Anchor Drilled Hole Ø Max Fixture Fixture Min Hole Effective Pack Qty Length (mm) (mm) Thickness (mm) Hole Ø (mm) Depth (mm) Length (mm)

l T06055 M6 55 6 15 8 55 38 100u T06055SS M6 55 6 15 8 55 38 100l T06085 M6 85 6 45 8 75 68 100u T06085SS M6 85 6 45 8 75 68 100l T06120 M6 120 6 80 8 75 103 50l T06150 M6 150 6 110 8 75 133 100l T06180 M6 180 6 140 8 75 163 100l T08065 M8 65 8 12 10 65 45 50u T08065SS M8 65 8 12 10 65 45 100l T08090 M8 90 8 40 10 75 70 50n T08090GH M8 90 8 40 10 75 70 50u T08090SS M8 90 8 40 10 75 70 50l T10075 M10 75 10 12 12 80 52 50u T10075SS M10 75 10 12 12 80 52 50l T10090 M10 90 10 30 12 90 67 20n T10090GH M10 90 10 30 12 90 67 50u T10090SS M10 90 10 30 12 90 67 50l T10120 M10 120 10 50 12 100 97 20l T12080 M12 80 12 6 15 90 58 20n T12080GH M12 80 12 6 15 90 58 20u T12080SS M12 80 12 6 15 90 58 20l T12100 M12 100 12 25 15 105 71 20n T12100GH M12 100 12 25 15 105 71 20u T12100SS M12 100 12 25 15 105 71 20l T12120 M12 120 12 45 15 105 93 20l T12140 M12 140 12 65 15 105 111 20n T12140GH M12 140 12 65 15 105 111 20u T12140SS M12 140 12 65 15 105 111 20l T12180 M12 180 12 100 15 125 151 20n T12180GH M12 180 12 100 15 125 151 20l T16100 M16 100 16 8 19 115 67 20n T16100GH M16 100 16 8 19 115 67 20u T16100SS M16 100 16 8 19 115 67 20l T16125 M16 125 16 20 19 135 85 20n T16125GH M16 125 16 20 19 135 85 20u T16125SS M16 125 16 20 19 135 85 20l T16150 M16 150 16 45 19 145 110 20n T16150GH M16 150 16 45 19 145 110 20u T16150SS M16 150 16 45 19 145 110 20l T16175 M16 175 16 70 19 145 135 20n T16175GH M16 175 16 70 19 145 135 20u T16175SS M16 175 16 70 19 145 135 20l T20120 M20 120 20 10 24 140 85 10n T20120GH M20 120 20 10 24 140 85 10u T20120SS M20 120 20 10 24 140 85 10l T20160 M20 160 20 35 24 170 115 10n T20160GH M20 160 20 35 24 170 115 10u T20160SS M20 160 20 35 24 170 115 10l T20215 M20 215 20 90 24 200 170 10n T20215GH M20 215 20 90 24 200 170 10# For FIX Z A4 Stainless steel Stud anchors go to page 36


Product Guide2014

MEDIUM DUTY ANCHORS TRUFAST PUSH-PULL ANCHORSItem Code Anchor Size (mm) Anchor Length (mm) Pack Qty

l TFE06 6 55 100l TFE06120 6 120 100

WERCS AnkaScrewTM ANCHORS Part No. Thread Anchor Drilled Hole Ø Max Fixture Fixture Hole Ø Socket Pack Qty Size Length(mm) (mm) Thickness (mm) (mm) Size (mm)

l AS06050W100 6 50 6 20 8 10 100t AS06050WGM100 6 50 6 20 8 10 100l AS06075W100 6 75 6 45 8 10 100t AS06075WGM100 6 75 6 45 8 10 100l AS06100W100 6 100 6 70 8 10 100t AS06100WGM100 6 100 6 70 8 10 100l AS08060W100 8 60 8 20 10 13 100t AS08060WGM100 8 60 8 20 10 13 100l AS08075W100 8 75 8 35 10 13 100t AS08075WGM100 8 75 8 35 10 13 100l AS08100W100 8 100 8 60 10 13 100t AS08100WGM100 8 100 8 60 10 13 100l AS10060W50 10 60 10 10 13 15 50t AS10060WGM50 10 60 10 10 13 15 50l AS10075W50 10 75 10 25 13 15 50t AS10075WGM50 10 75 10 25 13 15 50l AS10100W50 10 100 10 50 13 15 50t AS10100WGM50 10 100 10 50 13 15 50l AS12075W50 12 75 12 15 15 16 50t AS12075WGM50 12 75 12 15 15 16 50l AS12100W50 12 100 12 40 15 16 50t AS12100WGM50 12 100 12 40 15 16 50l AS12150W20 12 150 12 90 15 16 20t AS12150WGM20 12 150 12 90 15 16 20# For 16mm Ankascrew Flanged Hex Head (zinc finish) go to page 36

DynaBoltTM ANCHORS HEX BOLT Part No. Thread Anchor Drilled Hole Ø Max Fixture Fixture Hole Ø Pack Qty Size Length(mm) (mm) Thickness (mm) (mm)

l DP08045H M6 45 8 15 10 100u DP08045HSS M6 45 8 15 10 100l DP08070H M6 70 8 32 10 50u DP08070HSS M6 70 8 32 10 50l DP10045H M8 45 10 8 12 50u DP10045HSS M8 45 10 8 12 50l DP10055H M8 55 10 20 12 50u DP10060HSS M8 60 10 20 12 50l DP10080H M8 80 10 30 12 50u DP10080HSS M8 80 10 30 12 50l DP10105H M8 105 10 60 12 25u DP10105HSS M8 105 10 60 12 25l DP12065H M10 65 12 15 15 25l DP12075H M10 75 12 20 15 25u DP12075HSS M10 75 12 20 15 25l DP12105H M10 110 12 50 15 20l DP16110H M12 110 16 49 19 10



Product Guide2014

DynaBoltTM ANCHORS HEX NUT ZINC Part No. Thread Anchor Drilled Hole Ø Max Fixture Fixture Hole Ø Pack Qty Size Length(mm) (mm) Thickness (mm) (mm)

l D6026 M4.5 26 6 3 8 100l DP06040 M4.5 38 6 12 8 100u DP06040SS M4.5 38 6 12 8 100l DP06060 M4.5 57 6 30 8 100u DP06060SS M4.5 57 6 30 8 100l DP08040 M6 40 8 6 10 100u DP08040SS M6 40 8 6 10 100l DP08065 M6 66 8 25 10 50u DP08065SS M6 66 8 25 10 50l DP08090 M6 92 8 50 10 50l DP10040 M8 41 10 3 12 50n DP10040GH M8 41 10 3 12 50l DP10050 M8 49 10 20 12 50n DP10050GH M8 49 10 20 12 50u DP10050SS M8 49 10 20 12 50l DP10075 M8 76 10 30 12 50n DP10075GH M8 76 10 30 12 50u DP10075SS M8 76 10 30 12 50l DP10100 M8 103 10 50 12 25n DP10100GH M8 103 10 50 12 25u DP10100SS M8 103 10 50 12 25l DP10125 M8 124 10 80 12 25l DP12060 M10 55 12 10 15 25n DP12060GH M10 55 12 10 15 25u DP12060SS M10 55 12 10 15 25l DP12070 M10 70 12 15 15 25n DP12070GH M10 70 12 15 15 25u DP12070SS M10 70 12 15 15 25l DP12100 M10 98 12 45 15 20n DP12100GH M10 98 12 45 15 20u DP12100SS M10 98 12 45 15 20l DP12125 M10 126 12 70 15 20n DP12125GH M10 126 12 70 15 20u DP12125SS M10 126 12 70 15 20l DP16065 M12 62 16 6 19 20n DP16065GH M12 62 16 6 19 20l DP16110 M12 106 16 35 19 10n DP16110GH M12 106 16 35 19 10l DP16140 M12 140 16 65 19 10n DP16140GH M12 140 16 65 19 10l DP20080 M16 81 20 8 24 10n DP20080GH M16 81 20 8 24 10l DP20115 M16 113 20 25 24 5n DP20115GH M16 113 20 25 24 5l DP20160 M16 157 20 70 24 5

DynaBoltTM ANCHORS DECORATIVE HEADS Round Head Zinc Plated Part No. Thread Anchor Drilled Hole Ø Max Fixture Fixture Hole Ø Pack Qty Size Length(mm) (mm) Thickness (mm) (mm)

l D6032R M4.5 32 6 5 8 100l DP06055R M4.5 55 6 25 8 100

Flat Head Zinc Plated Part No. Thread Anchor Drilled Hole Ø Max Fixture Fixture Hole Ø Pack Qty Size Length(mm) (mm) Thickness (mm) (mm)

l D6034F M4.5 34 6 10 8 100l DP06060F M4.5 60 6 30 8 100u DP06060FSS M4.5 60 6 30 8 100l DP06075F M4.5 75 6 45 8 100u DP06075FSS M4.5 75 6 45 8 100l DP06100F M4.5 100 6 70 8 100l DP08060F M6 60 8 20 10 100l DP08085F M6 85 8 45 10 50l DP10075F M8 75 10 30 12 50l DP10100F M8 100 10 55 12 50l DP10125F M8 125 10 80 12 25



Product Guide2014

DynaBolt Special Part No. Bolt Thread Anchor Length Drilled Hole Ø Pack Qty Style Size (mm) (mm)

l D06026S Set Lok M4.5 26 6 500l D06038S Set Lok M4.5 38 6 100

l D08042E Tie Wire M6 42 8 100

l D08045K Hook Bolt M6 47 8 100

l D08045X Eye Bolt M6 47 8 100

DynaBolt Decorative Post Heads Part No. Head Thread Overall Length Pack Qty Style Size (mm)

u DR045SS Round M4.5 22 100l DR06 Round M6 22 100u DR06SS Round M6 22 100l REM06 Tie Wire M6 44 100l REM08 Tie Wire M8 47 100l REM10 Tie Wire M10 52 50l RFM06 Countersunk M6 23 100l RFM08 Countersunk M8 27 100u DF045SS Countersunk M4.5 23 100u DF06SS Countersunk M6 23 100u DF08SS Countersunk M8 27 100

DynaSet Drop-In anchors Part No. Thread Thread Anchor Length Drilled Hole Ø Pack Qty Size Length(mm) (mm) (mm)

l DSF06 M6 11 25 8 100l DSM06 M6 11 25 8 100u DSM06SS M6 11 25 8 100l DSM08 M8 13 30 10 100u DSM08SS M8 13 30 10 100l DSF10 M10 14 30 12 100l DSM10 M10 16 40 12 50u DSM10SS M10 16 40 12 50l DSF12 M12 21 50 16 50l DSM12 M12 21 50 16 50u DSM12SS M12 21 50 15 50l DSM16 M16 28 65 20 25u DSM16SS M16 28 60 20 25l DSM20 M20 35 80 25 25

Tie Wire

Counter Sunk

Rounded



Product Guide2014

DynaSetTM DROP-IN ANCHORS Item Code Description Pack Qty

RAP01 Elect. Mech. Services Pk(500 x DSF10 + set tool) 500 RAP12 Elect. Mech. Services Pk (200 x DSF12 + set tool) 200

DynaSetTM SETTING TOOLS Item Code To Suit Dynaset Pack Qty

SETDS1 DSM06/DSF06/DSM06SS 1 SETDS2 DSM08/DSM08SS 1 SETDF3 DSF10 1 SETDS3 DSM10/DSM10SS 1 SETDS4 DSM12/DSF12/DSM12SS 1 SETDS5 DSM16/DSM16SS 1 SETDS6 DSM20 1

DynaSetTM SAFETY RING ANCHORS Note: Request RamsetTM Tech Data Sheet for installation instructions.

Item Code Anchor Size (mm) Anchor Length (mm) x Thread Size Pack Qty Description

u RSR12SS 16 138 x M12 4t RSR12GM 16 138 x M12 4 SETSA4 Setting Tool 1u DSM12SS Dynaset 50 x M12 50

LoxinTM SHIELD ANCHORS Item Code Anchor Size (mm) Anchor Length (mm) x Thread Size Pack Qty

l RLM08 16 52 x M8 25l RLM10 16 52 x M10 25l RLM12 22 65 x M12 25l RLM16 26 75 x M16 25



Product Guide2014

LIGHT DUTY ANCHORS RediDriveTM

Item Code Anchor Size (mm) Anchor Length (mm) Pack Qty

t RD05030 5 30 100t RD05040 5 40 100t RD05050 5 50 100t RD05065 5 65 100t RD05075 5 75 100

ShureDriveTM ANCHORS Item Code Anchor Size (mm) Anchor Length (mm) Pack Qty

l SDM05022 5 22 100l SDM06030 6 30 100u SDM06030SS 6 30 100l SDM06050 6 50 100

ELECTRICAL SUPPORT FIXINGS Item Code Capacity (mm) Type Pack Qty

CHLD Cable bundles Cable Holder + Anchor 50 CWE05040 Cat wire Cat Wire Eye 100 DK20 16 - 20 Dynaclip 100 DK32 25 - 32 Dynaclip 100 VF1 1.6 - 2.5 Vertical Flange Clip 100

RamPlugsTM - STANDARD Item Code Anchor Size (mm) Anchor Length (mm) Pack Qty

DNP05 5 25 100 DNP06 6 30 100 DNP07 7 30 100 DNP08 8 40 100 DNP10 10 50 50 DNP12 12 60 25

RamPlugsTM - LONG Item Code Anchor Size (mm) Anchor Length (mm) Pack Qty

DLP08 8 80 100 DLP10 10 80 50

RamPlugsTM - ULTRA LONG Item Code Anchor Size (mm) Anchor Length (mm) Pack Qty

l DUP10080F 10 80 25l DUP10080H 10 80 25l DUP10100F 10 100 25l DUP10100H 10 100 25l DUP10135F 10 135 25l DUP10135H 10 135 25l DUP10160F 10 160 25l DUP10160H 10 160 25



Product Guide2014

InsulFastTM DRILL ANCHORS Item Code Anchor Size (mm) Insulation Thickness (mm) Pack Qty

CB5060 8 50 to 60 200 CB7080 8 70 to 80 200 CB90100 8 90 to 100 200

HOLLOW WALL ANCHOR Item Code Thread Size Wall Thickness (mm) Pack Qty

HW05M4 M4 Up to 5 100 HW10M4 M4 6 – 10 100 HW13M4 M4 8 – 13 100 HW24M4 M4 16 - 24 100 HW38M4 M4 34 - 38 100 HW14M5 M5 7 – 14 100 HW16M6 M6 6 – 16 100

HOLLOW WALL ANCHOR SETTING TOOL Item Code Description Pack Qty

SETHWG Hand Setting Tool - Gun 1

WallMateTM

Item Code Screw Gauge x Wall Thickness (mm) Pack Qty Min. Screw Length (mm)

WMZ 8 x 20 10 – 12 100 WM25 6 - 8 x 20 10 – 12 100

WMZ

WM25



Product Guide2014

NYLON ANCHORS Item Code Anchor Size (mm) x Head Type Pack Qty Anchor Length (mm)

l TNM325 5 x 25 Mushroom 100u TNM325SS 5 x 25 Mushroom 100l TNR325 5 x 25 Round 100u TNR325SS 5 x 25 Round 100l TNL325 5 x 25 Flat 100l TNR338 5 x 38 Round 100l TNM425 6.5 x 25 Mushroom 100u TNM425SS 6.5 x 25 Mushroom 100l TNR425 6.5 x 25 Round 100l TNM438 6.5 x 38 Mushroom 100l TNR438 6.5 x 38 Round 100l TNF450 6.5 x 50 Countersunk 100l TNM450 6.5 x 50 Mushroom 100l TNR450 6.5 x 50 Round 100l TNM475 6.5 x 75 Mushroom 50

EasyDriveTM ANCHORS Item Code Anchor Size (mm) Anchor Length (mm) Pack Qty

l ED05033 5 33 100u ED05033SS 5 33 100l ED05050 5 50 100l ED06042 6 42 100u ED06042SS 6 42 100l ED06055 6 55 100u ED06055SS 6 55 100l ED06075 6 75 100u ED06075SS 6 75 100l ED08080 8 80 50l ED08120 8 120 50

PLASTIC PLUGS (FRAME PACKS) Item Code Length (mm) x Drill Size (mm) Colour Pack Qty

WPWH25 25 x 5 White 1000 WPRD25 25 x 6 Red 1000 WPRD32 32 x 6 Red 1000 WPRD38 38 x 6 Red 1000 WPRD50 50 x 6 Red 1000 WPGR25 25 x 7 Green 1000 WPGR32 32 x 7 Green 1000 WPGR38 38 x 7 Green 500 WPGR50 50 x 7 Green 500 WPBU38 38 x 8 Blue 500 WPBU50 50 x 8 Blue 500



Product Guide2014

EXTREME ANCHORING FOR DESIGN SPECIFICATION UNDERCUT SAFETY ANCHORING SYSTEM Undercut Anchor (Pre-set)

Item Code Suits Hole Description Thread Size (mm) x Pack Qty Diameter Effective Length (mm)

UCMPM20240HD 36mm Undercut Pre-set Anchor M20X240/50(P-HD) 6 UCMPM16190HD 30.5mm Undercut Pre-set Anchor M16x190/40(P-HD) 6 UCMPM12135HD 22.5mm Undercut Pre-set Anchor M12x135/30(P-HD) 6 UCMPM10110HD 20mm Undercut Pre-set Anchor M10x110/25(P-HD) 6

UNDERCUT SAFETY ANCHORING SYSTEM Setting Tool for Undercut Anchors Item Code Description Pack Qty

ST360 Setting Tool for M20 X 240mm Undercut Anchor 1 ST305 Setting Tool for M16x190mm Undercut Anchor 1 ST225 Setting Tool for M12x135mm Undercut Anchor 1 ST110 Setting Tool for M10x110mm Undercut Anchor 1

UNDERCUT SAFETY ANCHORING SYSTEM Checking Gauge for Undercut hole Item Code Suits Hole Diam Description Pack Qty

GE360 36mm Checking Gauge for M20x240mm anchor 1 GE305 30.5mm Checking Gauge for M16x190mm anchor 1 GE225 22.5mm Checking Gauge for M12x135mm anchor 1 GE200 20mm Checking Gauge for M10x110mm anchor 1

EPCON C8 Epoxy Anchoring adhesive (Styrene free) Item Code Description Carton Qty

055829 EPCON C8 Epoxy (900ml ) with mixer nozzle 6 600XPPM1 Bi-Mix applicator tool (900ml ) for EPCON C8 1 ISNE Epoxy mixer nozzle for EPCON C8 5


Product Guide2014

SPATEC PLUS Safety Anchors (Hex Nut design) Item Code Anchor Size (mm) Anchor Length (mm) x Thread Size (mm) Pack Qty

l 050675 10 100xM6 100l 050681 12 80xM8 50l 050692 15 105XM10 25l 050699 18 125xM12 20l 050707 24 155xM16 5l 050708 24 200xM16 5l 050713 28 185xM20 5l 050714 28 225xM20 5* Lead times apply

FIX Z A4 Stud Anchor STAINLESS STEEL 316 Item Code Anchor Size (mm) x Head Type Pack Qty Anchor Length (mm)

u 050441 8x40 Hex Nut Through anchor (316 Stainless steel) 100u 054610 8x55 Hex Nut Through anchor (316 Stainless steel) 100u 054620 8x75 Hex Nut Through anchor (316 Stainless steel) 100u 050367 8x115 Hex Nut Through anchor (316 Stainless steel) 50u 050466 10x47 Hex Nut Through anchor (316 Stainless steel) 50u 054630 10x57 Hex Nut Through anchor (316 Stainless steel) 50u 054640 10x78 Hex Nut Through anchor (316 Stainless steel) 50u 050442 10x103 Hex Nut Through anchor (316 Stainless steel) 25u 054670 12x55 Hex Nut Through anchor (316 Stainless steel) 20u 054650 12x76 Hex Nut Through anchor (316 Stainless steel) 20u 050368 12x91 Hex Nut Through anchor (316 Stainless steel) 25u 054680 12x116 Hex Nut Through anchor (316 Stainless steel) 25u 050443 16x94 Hex Nut Through anchor (316 Stainless steel) 25u 054700 16x119 Hex Nut Through anchor (316 Stainless steel) 10u 050444 16x139 Hex Nut Through anchor (316 Stainless steel) 10* Lead times apply

AnkaScrewTM ANCHORS Item Code Anchor Size (mm) x Head Type Pack Qty Anchor Length (mm)

l AS16115 16 X 115 Flanged Hex Head (Zinc plate) 10l AS16140 16 x 140 Flanged Hex Head (Zinc plate) 10l AS16160 16 x 160 Flanged Hex Head (Zinc plate) 10



Product Guide2014

CONCRETERS AND BUILDERS ACCESSORIES FERRULES - ROUND (STILETTO) Products on pgs 37 & 38 also distributed by ReidTM

Item Code Thread Size x Ferrule Length (mm) Pack Qty Thread Length (mm)

l FS16070 M16 x 32 70 50n FS16070GH M16 x 32 70 50l FS16095 M16 x 39 95 50n FS16095GH M16 x 39 95 50l FS20070 M20 x 32 70 50n FS20070GH M20 x 32 70 50l FS20095 M20 x 39 95 50n FS20095GH M20 x 39 95 50

FERRULES - ELEPHANT FEET Item Code Thread Size x Ferrule Length (mm) Pack Qty Thread Length (mm)

l FE10045 M10 x 20 45 250l FE12055 M12 x 25 55 200n FE12055GH M12 x 25 55 200l FE12095 M12 x 25 95 100n FE12095GH M12 x 25 95 100l FE16070 M16 x 32 70 100n FE16070GH M16 x 32 70 100l FE16095 M16 x 32 95 75n FE16095GH M16 x 32 95 75l FE20070 M20 x 32 70 75n FE20070GH M20 x 32 70 75l FE20095 M20 x 38 95 50n FE20095GH M20 x 38 95 50l FE24095 M24 x 50 95 40n FE24095GH M24 x 50 95 40

FERRULES - STAINLESS STEEL Item Code Thread Size x Ferrule Length (mm) Pack Qty Thread Length (mm)

u FE10045SS M10 x 20 45 250u FE12055SS M12 x 25 55 200u FE16070SS M16 x 32 70 100u FE20095SS M20 x 45 95 50

RAMSETTM STORAGE Item Code Description Pack Qty

RFB RamsetTM Fastener Box 1 FERRULE ACCESSORIES Item Code Description Thread Size Pack Qty

FM12N Nailing Plate - RED M12 100 FM16N Nailing Plate - GREEN M16 100 FM20N Nailing Plate - BLUE M20 100 FM24N Nailing Plate - YELLOW M24 100 FWSC125 Support Chair - 125mm 50 FWSC150 Support Chair - 150mm 50 FWSC175 Support Chair - 175mm 50 FWSC200 Support Chair - 200mm 50 FSC25 Stiletto Ferrule Chair - 25mm 50 FSC50 Stiletto Ferrule Chair - 50mm 50 FSC75 Stiletto Ferrule Chair - 75mm 50 FSC100 Stiletto Ferrule Chair -100mm 50



Product Guide2014

SWIFTSHIM Item Code Thickness Pack Qty

SHIM01 1mm 100 SHIM02 2mm 200 SHIM03 3mm 100 SHIM05 5mm 100 SHIM10 10mm 40 SHIM15 15mm 40 SHIM20 20mm 30

ACCESSORIES Item Code Description Pack Qty

RBH Rambar Leverage Tool 1 DSR16 Dowelsert to suit 16 diam Round Bar 25 DSR20 Dowelsert to suit 20 diam Round Bar 25 RPF Panel Fillet (12mm x 12mm) - 3 metre length 75m RFF Form Fillet (17mm x 17mm) - 3 metre length 75m RPFJ Panel False Joint (40mm x 12mm) - 3 metre length 30m RFFJ Form False Joint (40mm x 12mm) - 3 metre length 30m PFC Fillet Shear 1


Product Guide2014

CHEMICAL ANCHORING ChemSetTM 101 Plus Styrene Free Polyester Anchoring Adhesive Item Code Description Pack Qty

ISKP ChemSet™ 101 Plus Kit* 10 C101J ChemSet™ 101 Plus Jumbo (750ml) + 2 x Mixer Nozzle 12 C101C ChemSet™ 101 Plus Cartridge (380ml) + 2 x Mixer Nozzle 20 ISNP Mixer Nozzle for ChemSet™ 101 Plus 5* Kit consists of 2 x 380 ml cartridges + 4 x mixer nozzles

UltraFixTM Plus Polyester Anchoring Adhesive for Standard Caulking Gun Item Code Description Pack Qty

UFP300P UltraFix™ Plus 300 ml 10

StructaSetTM 401 Heavy Duty Epoxy Acrylate Anchoring Adhesive Item Code Description Pack Qty

S401C StructaSet™ 401 Cartridge (380ml) + 2 x Mixer Nozzle 20 S401J StructaSet™ 401 Jumbo (750ml) + 2 x Mixer Nozzle 12 ISNP Mixer Nozzle for StructaSet™401 5

ChemSetTM 801 Heavy Duty Vinyl Ester Anchoring Adhesive Item Code Description Pack Qty

C801C ChemSet™ 801 Cartridge (380ml) + 2 x Mixer Nozzle 20 C801J ChemSet™ 801 Jumbo (750ml) + 2 x Mixer Nozzle 12 ISNE Mixer Nozzle for ChemSet™801 5

ChemSetTM Reo502TM Extra Heavy Duty Epoxy Anchoring Adhesive Item Code Description Pack Qty

REO502J ChemSet™ Reo502™ (750ml) + Mixer Nozzle 12 REO502JEF ChemSet™ Reo502EF™ (750ml) + Mixer Nozzle 12 ISNE Mixer nozzles for Reo502™ 5 ISNET Mixer nozzles for Reo502™ Fast Dispensing 5

EPCON C8 Epoxy Anchoring adhesive Item Code Description Pack Qty

055829 EPCON C8 Epoxy (900ml ) with mixer nozzle 6 600XPPM1 Bi-Mix applicator tool (900ml ) for EPCON C8 1 ISNE Epoxy mixer nozzle for EPCON C8 5


Product Guide2014

ChemSetTM MaximaTM Anchoring Capsules Item Code Anchor Size (mm) Pack Qty

CHEM08 M8 10 CHEM10 M10 10 CHEM12 M12 10 CHEM16 M16 10 CHEM2024 M20 & M24 6

ChemSetTM Nylon Sleeves for Hollow Masonry Anchoring with ChemSetTM 101 Plus and StructaSetTM 401 Item Code Sleeve Length (mm) x To Suit Stud Pack Qty Drill Size (mm)

ISS08 64 x 12 M8 100 ISS10 64 x 14 M10 100 ISS12 64 x 16 M12 100

ChemSetTM Metal Mesh Sieves for Hollow Masonry Anchoring with ChemSetTM 101 Plus and StructaSetTM 401 Item Code Sleeve Length (mm) x To Suit Stud Pack Qty Drill Size (mm)

ISM10 1000 x 12 M6/M8 1 ISM12 1000 x 16 M10/M12 1 ISM16 1000 x 22 M16 1

ChemSetTM Retaining Collars for Overhead Anchoring Item Code Anchor Size (mm) To Suit Anchor Pack Qty

ISR10 10 CS10130 100 ISR12 12 CS12160 100 ISR16 16 CS16190 100

REMEDIAL BRICK WALL TIES (for use with ChemSetTM 101 Plus) Item Code Material Anchor Length (mm) Pack Qty

RA225 Nylon 220 100


Product Guide2014

ChemSetTM ANCHOR STUDS Item Code Anchor Size (mm) Anchor Length (mm) x Thread Size Pack Qty

l CS08110 8 110 x M8 10n CS08110GH 8 110 x M8 10u CS08110SS 8 110 x M8 10l CS10130 10 130 x M10 10n CS10130GH 10 130 x M10 10u CS10130SS 10 130 x M10 10l CS12160 12 160 x M12 10n CS12160GH 12 160 x M12 10u CS12160SS 12 160 x M12 10l CS12180 12 180 x M12 10l CS16190 16 190 x M16 10n CS16190GH 16 190 x M16 10u CS16190SS 16 190 x M16 10l CS20260 20 260 x M20 6n CS20260GH 20 260 x M20 6u CS20260SS 20 260 x M20 6l CS24300 24 300 x M24 6n CS24300GH 24 300 x M24 6u CS24300SS 24 300 x M24 6

Threaded Inserts - Internally Threaded Anchors Item Code Anchor Size (mm) Anchor Length (mm) x Thread Size Pack Qty

l 062770 8 60 x M8 10u 062860 8 60 x M8 10l 062480 10 65 x M10 10u 062960 10 65 x M10 10l 062760 12 75 x M12 10u 063100 12 75 x M12 10l 062800 16 125 x M16 10u 051175 16 125 x M16 10l 062810 20 170 x M20 10 ChemSetTM SYSTEMS APPLICATORS Item Code Description Pack Qty

CUAP Chemset™ Universal Applicator* 1 CUAPN Pneumatic Universal Applicator* 1 C380A Chemset™ Applicator 380ml** 1*For dispensing ChemSet™ 101 Plus, StructaSet™ 401, ChemSet™ 801 and ChemSet™ Reo 502™ Cartridges **For dispensing ChemSet™ 101 Plus, ChemSet™ 801 and StructaSet™ 401 380 ml Cartridges (C101C, C801C, S401C) ChemSetTM HOLE CLEANING ACCESSORIES Item Code Anchor Size (mm) Description Pack Qty

HCBT13 8 – 12 Brush 1 HCBT20 16 - 20 Brush 1 HCBT26 20 - 24 Brush 1 HCBT201000 16 - 20 1 m long Brush 1 HCBT261000 20 - 26 1 m long Brush 1 HCBT361000 27 - 36 1 m long Brush 1 HCBT421000 37 - 42 1 m long Brush 1 HCP - Dust Blower 1 HCPHV - High Volume Dust Blower 1For cleaning dust from holes in concrete ChemSetTM Anchoring Kit Item Code Description Pack Qty

CHEMKITBAG Tool bag, CUAP, HCPHV,HCBT13,HCBT20,HCBT26 1

Part No. CHEMKITBAGl Carbon Steel Zinc Plated u Stainless Steel 316 n Hot Dipped Galvanised t Mechanically Galvanised


Product Guide2014

CONSTRUCTION CHEMICALS SEALANTS Item Code Colour Pack Size Carton Qty

ROOF SEAL NEUTRAL CURE ROOFING & PLUMBING SILICONE RFSLTRG300 Translucent 300 ml 20 RFSLALG300 Aluminium 300 ml 20 RFSLGYG410 Grey 300 ml 20

WATER SEAL ACETIC CURE SANITARY SILICONE WRSLWHG300 White 300 ml 20

HiSeal™ POLYURETHANE CONSTRUCTION SEALANT HYSLGYG375 Grey 300 ml 25 HYSLGYG720 Grey 600 ml 20

DynaSeal™ URETHANE ACRYLIC CONSTRUCTION SEALANT DYSLGYG900 Grey 600 ml 15

BlazeBrake™ ACRYLIC FIRE RATED SEALANT BLBRGYC Grey 300 ml 20 BLBRGYS Grey 600 ml 15

FyreBrake™ POLYURETHANE FIRE RATED SEALANT FYBRGYS Grey 600ml 12

DuctSeal™ ACRYLIC SEALANT FOR DUCTWORK DSLWG450 Grey 300 ml 20

GAP SEAL PAINTABLE GAP SEALANT GPSLWHG450 White 300 ml 20

BARREL GUN, CAULKING GUNS AND ACCESSORIES FOR SEALANTS Item Code Description Pack Qty

CAGU850 Caulking Gun for 850ml / 900 ml Cart. 1 CAGU300 Caulking Gun for 300ml Cart. 1 SABGU37 37cm Barrel Gun for sealant sausages 1 BGUNS Nozzle Set Assorted for SABGU37 (Pack of 5) 5 BGUNOZ Nozzle Set Natural for SABGU37 (Pack of 10) 10

POLYETHYLENE CLOSED CELL FOAM BACKER ROD Item Code Colour Diameter (mm) Length (m)

BRPE06 White 6 250 BRPE10 White 10 250 BRPE13 White 13 50 BRPE15 White 15 50 BRPE20 White 20 50 BRPE25 White 25 50 BRPE30 White 30 50 BRPE40 White 40 2 BRPE50 White 50 2


Product Guide2014

ADHESIVES NailFreeTM Construction Adhesive Item Code Description Pack Size Carton Qty

NFCAG320 300 ml Cartridge 300 ml 10 NFCAG930 900 ml Cartridge 900 ml 10

SAFE-T-BONDTM Water Clean Up Construction Adhesive Item Code Description Pack Size Carton Qty

STBDL1 1 L Sachet 1 Litre 10

RamsetTM FomofillTM Self-Expanding Gap Filling Foam Item Code Description Pack Size Carton Qty

FMFLG500 Fomofill™ 500 ml 12 FMFLG750 Fomofill™ 750 ml 12 FMLN Fomofill™ Nozzles 5 5

FomoPlusTM Applicator Foam Item Code Description Carton Qty

FMPLG750 Fomoplus™ 750 ml Canister 12 FMPLGU Fomoplus™ Applicator Gun 1 FMPLGU300 Fomoplus™ Applicator Gun Metal 1

FomoTM Aerosol Solvent Cleaner for FomoPlusTM Applicators Item Code Description Pack Size Carton Qty

FMSVM500 Fomo™ Solvent 500 ml 12


Product Guide2014

CONCRETE REPAIR Item Code Colour Pack Size Carton Qty

Epoxy Paste 1210 - Epoxy Repair Compound for Concrete EP1210L4 Grey 4 litre 1 EP1210L20 Grey 20 litre 1 Epoxy Binder 2150 - Fluid Epoxy Resin for Concrete Repair EP2150L3 Amber 3 litre 1 EP2150L15 Amber 15 litre 1 Epoxy Grout 7042 - Epoxy Grouting Compound, Standard Cure and Low Exotherm EP7042L3 Grey 3 litre 1 EP7042L13 Grey 13 litre 1 EP7042LEL3 Grey 3 litre 1 EP7042LEL13 Grey 13 litre 1


Product Guide2014

CEMENTITIOUS GROUTS Item Code Description Pack Size Qty

RPGMP Premier Grout MP 20kg 1 RPHFC PoziFlo Grout HFC 20 Kg 1 830104 Ultrafix™ Concremate™ 10kg 1

Fine Grade Filler for Epoxy Patch and Epoxy Grout Item Code Description Pack Size Qty

RFLFG Fine Grade Fillers 20kg 1

Mixing Paddles for Grouts and Epoxies Item Code Description Qty

SSMP Small Spiral Mixing Paddle 1 LSMP Large Spiral Mixing Paddle 1

CONCRETE ADDITIVES Item Code Description Pack Size Qty

CemCrete™ Bonding and Sealing Agent CMCRL5 Cemcrete™ 5 litre 1 CMCRL20 Cemcrete™ 20 litre 1


Product Guide2014

FIRE PROTECTION AND SUSPENSION SYSTEMS FIRE PROTECTION OF PIPE PENETRATIONS RAMSETTM FIRE COLLARS CAST IN STACKWORK (TALLS)

Item Code Pipe Type Diameter Size (mm) Carton Qty

RFCH65S PVC/HDPE PPR PVC 40/50/65. HDPE 75. PPR32/40/50/65/75 30 RFCH100S PVC/HDPE PP/PPR PVC 80/90/100. HDPE 100. PP100. PPR 90/110 18 RFCH150S PVC/PE PVC 150. PE 150. 4

RAMSETTM FIRE COLLARS CAST IN STACKWORK (SHORT) Item Code Pipe Type Diameter Size (mm) Carton Qty

RFCL40S PVC / PPR PVC 40. PPR32/40 90 RFCL50S PVC / PPR PVC 50. PPR50 90 RFCL65S PVC / PPR PVC 65. PPR63 90 RFCL80S PVC / PPR PVC 80. PPR75 50 RFCL90S PVC / PPR PVC 90. PPR90 50 RFCL100S PVC/HDPE/PP/PPR PVC 100. HDPE100. PP100. PPR110 50

RAMSETTM FIRE COLLARS RETROFIT STACKWORK (LOW PROFILE) Item Code Pipe Type Diameter Size (mm) Carton Qty

RFC100R PVC/HDPE PVC 80/90/100. HDPE 100. PPR 100 (WALL). PE 100 (WALL) 8 RFC65R PVC PVC 40/50/65. PVC 50 (WALL) 24 RFC25R PEX/Conduit PEX 16/25mm, conduit FR Plaster Wall 8Consult technical data for tested applications and fire ratings before commencing use. Go to www.ramset.com.au.

FIRE COLLARS CAST IN STACKWORK (TALLS) Item Code Pipe Type Diameter Size (mm) Carton Qty

SNAPH50S PVC 40/50 60 SNAPH100S PVC/HDPE 65/80/90/100 18 SNAPH150S PVC/HDPE/PPR/PE 150 1

FIRE COLLARS CAST IN - FLOOR WASTE (TALLS) Item Code Pipe Type Diameter Size (mm) Carton Qty

SNAPH50FWS PVC/HDPE/ PPR/PE 40/50 60 SNAPH100FWS PVC/HDPE/ PPR/PE 65/80/100 18Consult technical data for tested applications and fire ratings before commencing use. Go to www.ramset.com.au.

FIRE COLLARS CAST IN -FLOOR WASTE (SHORT)

Item Code Pipe Type Diameter Size (mm) Carton Qty

SNAPL80FWS PVC/HDPE/ PPR/PE 80 24 SNAPL100FWS PVC/HDPE/ PPR/PE 100 24

RETROFIT FIRE COLLARS (LOW PROFILE) FLOORWASTE AND STACKWORK Item Code Pipe Type Diameter Size (mm) Carton Qty

SNAPLP100R PVC 100 2 SNAPLP50R PVC 50 1

RETROFIT FIRE WRAPS FOR PLASTIC PIPE

STACKWORK Item Code Pipe Type Diameter Size (mm) Carton Qty

RFW100R PVC 100 20 RFW80R PVC 80 20 RFW65R PVC 65 20 RFW50R PVC 50 20 RFW40R PVC 40 20


Product Guide2014

RETROFIT FIRE PILLOWS FOR CABLE AND METAL PIPE SERVICES Item Code Type Size (mm) Carton Qty

RFP300250 Large 300x250x40 15 RFP200250 Medium 200x250x40 20 RFP100250 Small 100x250x40 30

FIRE RATED EXPANDING PU FOAM Item Code Size Description Carton Qty

FRF700 750 ml BlazeBrake™ FR Foam 12Consult technical data for tested applications and fire ratings before commencing use. Go to www.ramset.com.au.

CAST-IN ROCKETS (MULTIPURPOSE VOID FORMER) NOT FIRE RATED

Item Code Services Type Services Diam (mm) Carton Qty

RKTH100 Cable/Pipe up to 115mm 18 RKTH065 Cable/Pipe up to 75mm 30

ALLTHREAD ROD AND ACCESSORIES

ALLTHREAD ROD Item Code Thread Size Thread Length (mm) Pack Qty

RTRM10L3 M10 3000 10 RTRM12L3 M12 3000 10

NUTS / WASHERS Item Code Thread Size Description Pack Qty

HNM10 M10 HEX NUT ZP 200 HNM12 M12 HEX NUT ZP 200 RWM10 “Suit M10 (25mm OD)” Round Washer ZP 200 RWM12 “Suit M12 (28mm OD)” Round Washer ZP 200

CHANNEL PROFILES, SUPPORTS AND ACCESSORIES COMBINATION CLIP (Channel and individual mount) Item Code Description Diameter Size (mm) Carton Qty

363020 Combination Clip 20-25 100 363035 Combination Clip 35-42 50 363050 Combination Clip 50 50

RAPID CHANNEL RAIL BOLT Item Code Description Thread Size x Length Carton Qty

334930 Rail Bolt (27/18mm) M10 x 30mm 100

HEAVY DUTY ANCHORING (Channel & Individual Mount) PACKS Item Code Description Pack Qty

RAP01 Elect.l Mech. Services Pk (500 x DSF10 + set tool) 500 RAP02 Serv. Pk (500 x AS05030H + 5/16” mag nutsetter) 500 RAP12 Elect.l Mech. Services Pk (200 x DSF12 + set tool) 200

AnkaScrewTM SUSPENSION SYSTEM Item Code Description Carton Qty

AS06035R AnkaScrewTM ROD 6 x 35mm M10 50 AS06035RM12 AnkaScrewTM ROD 6 x 35mm M12 50 AS06035S AnkaScrewTM STUD 6 x 35mm M8 100


Product Guide2014

NOTES

Sales, Orders and Enquiries

Tel: 1300 780 063Fax: 1300 780 064Email: [email protected]: www.ramset.com.au

ITW Australia Pty. Ltd. ABN 48 004 297 009 trading as Ramset™ © Copyright 2013 ™Trademarks of Cetram Pty. Ltd. used under license by Ramset™

In the interests of product improvement, Ramset™ reserves the right to alter product specifications as required. Information included in this Product Catalogue is correct at time of printing. It is the responsibility of the user to ensure product selected is appropriate for its intended use. For further technical information go to www.ramset.com.au or contact Ramset™ on the numbers indicated.

HEAD OFFICE1 Ramset DriveChirnside Park, Victoria 3116

STATE BRANCHESVICTORIA5/71 Victoria Crescent, Abbotsford 30671 Ramset Drive, Chirnside Park 3116

SOUTH AUSTRALIA115 Sir Donald Bradman Drive, Hilton 5033

NEW SOUTH WALES71 Carnarvon Street, Silverwater 2128563 Gardeners Road, Mascot 20203/8 Channel Road, Mayfield West 2304

ACT5/19 Tennant Street, Fyshwick 2609

QUEENSLAND53 Doggett Street, Newstead 400614 Hills Street, Garbutt, Townsville 4814

WESTERN AUSTRALIA525 Abernethy Road, Kewdale 6105

PART No.RAMPG2014

product guide - · pdf fileproduct guide 2014. ... ts750ptm - proven framing tool 300j up to...

Documents