product catalouge - mafi · joint plate kit crossover kit combiclamp family 3-sector antenna...

— Product Catalouge2018

3La

yout

and

pro

duct

ion:

Sah

lsa

Kom

mun

ikat

ion

One-Direction Offset Family

Symmetric Offset Family

Small Universal Pole Mount

Raking Tower Leg Offset Family

Vertical Tower Leg Offset Family

Joint Plate Kit

Crossover Kit

Combiclamp Family

3-sector Antenna Mounting

Rafter Bracket Kit

Telescopic Strut Support

RRU and ERS-mount Families

RRU Support

RRU Adaptor Plate

Antenna Offset

Free Stander Light

Free Stander Medium

Freestanding Corner Mount

Extra Pole Kit

Adjustable Cabinet Platform

79.

83.

87.

91.

95.

Medium Duty Wall Mount

Heavy Duty Wall Mount

Large Offset Wall Mount

Corner Wall Mount

99.

103.

107.

111.

Stainless Steel 10-hole Earthbar

Cable Holder Family

Tubes and Components and Various Accessories

115.

119.

123.

Supports and brackets

Freestanding solutions

Wall mount solutions

Accessories

Index

7.

11.

15.

19.

23.

27.

31.

35.

39.

43.

47.

51 – 65.

67.

71.

75.

4

In a world where everyone has to depend on each other, Mafi wants to make your life easier. For 25 years our customer relations has been just as important as the quality of our products. Knowing this, we have built the worldwide company we are today. On paper, Mafi is an engineering company that designs, tests, manufactures and delivers steelwork solutions.

But we go further than that:

We are responsive – we see it as part of our mission to understand your actual need.

We are explorers — we are always looking for new ways to enhance our solutions.

We are reliable — we always deliver on our promises.

Whatever it takes to get you there, we’re always prepared to go the extra mile; making us your preferred strategical partner.

CE Marking, Product Development and Design AidsMafi is a EN 1090 certified organization, which means that our CE-marked kits comply with EN 1090-1, EN 1090-2 standards to Execution Class 2.

During the product development process, every component is designed and optimised using Finite Element Analysis techniques. Prototypes are then physically tested and refined in our laboratory.

Every design follows these guidelines:

• Make the kit as easy as possible to assemble and provide clear assembly instructions.

• The kit is packed in as small a box as possible to ensure efficient storage and transport.

• Make the product as light as possible for easy handling on site.

Every kit comes with a data sheet with load tables. The load tables give the maximum ultimate vertical and horizontal loads that may be applied to the kit.

For bracket kits that can be clamped to tubular parent members — or support a tubular member — there is also a table of torque resistance for different standard tube diameters. MAFI provides CAD blocks for all kits and we can also provide Excel tools for checking brackets and freestanders.Disclaimer:

Design recommendations given by MAFI concerning the use of a particular product are based on site information provided by the customer. MAFI provides a Declaration of Performance for the product itself, and it is the customer’s responsibility to ensure that imposed loads are within the capacity of the product.

It is always the responsibility of the site designer to verify that the parent structure is adequate to support the loads imposed by the product and that the installation of the product will comply with the installation instructions and with statutory and site owner’s rules and regulations.

Your direction is our goal.

5

When MAFI began in 1992, our business idea was to offer standardised products in a young and fast growing industry segment, when almost every telecom site had a unique design. Our goal has always been to simplify site builds solutions for our customers so that they can focus on their core business and manage more efficient and profitable rollouts. 25 years later, I find that we have achieved these goals – and surpassed them by a considerable margin! Today, our solutions are found in leading telecom suppliers' product portfolios and used worldwide.

Over the years we have accumulated experience and built up depth of expertise that – according to our customers – makes us one vof the leading suppliers in our segment. We develop, test and manufacture standardised products, in full accordance with the national requirements and standards of our global markets. Every detail is characterised by accuracy and Swedish quality. We provide detailed guidance on where and how our solutions can be used, whether it concerns wind loads or weights on a mast. Regardless of where our products are manufactured – Asia, The Far East, Mexico or Sweden – we always guarantee MAFI's high quality.

And now we are marching into the future! Recently, we moved to new, modern premises. This has enabled us to locate our entire business, including an efficient and partially robotised logistics centre, under one roof, thereby creating the potential to grow and develop even more.

We are market leaders in delivery times, a fact appreciated by our customers who need our products just-in-time. Over 99 percent of our shipments meet our promised delivery times. It is no secret that this is one of the keys to our success!

We are currently working to dramatically shorten lead times for developing new products, through investment in new software, machinery and highly skilled people.

This is already enabling us to provide a comprehensive product range, from volume products through to specialised niche solutions. We are laying the foundation for developing further patented products which, like their predecessors, can become global top sellers.

It has been our customers' needs that have guided our business throughout the years. We will continue to listen to you, to inform our experience and expertise. In this way, I hope that during at least another 25 years, we will be able to provide you with solutions that contribute to your success, swiftly and affordably.

Pierre Bengtsson, CEO

25 years – and we have just started.

MAFI 3263One-Direction Offset Family—Designed to allow an equipment pole to be offsetfrom a parent pole or tower leg.

Additional features:

• Lightweight but rigid.

• Few parts and easy to assemble.

7

MAFI 3263One-Direction Offset Family—Designed to allow an equipment pole to be offsetfrom a parent pole or tower leg.


• Lightweight but rigid.

• Few parts and easy to assemble.

8

Part listParts Material Quantity

Clamps S355MC FZV 2.4 (3272)

Brackets S355MC FZV 2

U-bolts M12 A4 or 8.8 FZV 2

Threaded rods M12 8.8 FZV 4.8 (3272)

Nuts and washers M12 8.8 FZV -

Package dataProduct Length (mm) Width (mm) Height (mm) Weight (kg)

3263/3265 780 240 60 7.5

3272 1000 350 60 24

3273 380 230 60 6.7

Product optionsMAFI 3265, 400 mm tube offset kit that fi ts Ø 89 - Ø 114 mm

MAFI 3272

MAFI 3263/3265

MAFI 3273

Tightening torque

Equipment pole

Parent pole/leg

© 2017 MAFI AB. All rights reserved.

*Article MAFI 3263/3272/3273

Art. no 3263 & 3273:Ø 60 – 76 mm

Art. no 3265:Ø 89 – 114 mm

40 × 40 mmup to 120 × 120 mm

40 × 40 mm up to120 × 120 mm

Art. no 3263, 3265 & 3273:Ø 25 – 169 mm

Art. no 3272:Ø 48 – 193 mm

Threaded rods M12: 31 Nm

U-bolts M12: 31 Nm

Rev 4

EN 1090

MAFI 3263

MAFI 3272

MAFI 3273

Content of kit


*Article MAFI 3263/3272/3273

Designed to allow an equipment pole to be offset froma parent pole or tower leg.

FlexibilityThe 3263, 3265 and 3273 brackets can be mounted on any vertical round member from Ø 25 – 169 mm and also on vertical angel sections. The offset pole can be Ø 60.3 mmor Ø 76.1 mm with the standard Ø 76 mm U bolts supplied,or optionally up to Ø 114.3 mm.

The 3273 provide a maximum c/c offset of 230 mm and the 3263 and 3265 provide a maximum c/c offset of 420 mm respectively 400 mm. The 3272 fi ts round members fromØ 48 – 193 mm and provides a maximum offset of800 mm. The 3272 incorporates a double clamp to cope with the high torque loads impose by antennas at a large offset.

Detailed design dataDetailed design data for this productcan be found at www.mafi .se.

How to OrderTo order this kit, please contact MAFI quoting article number:

3263 or E-order number (SEG): 60006673265 or E-order number (SEG): 60006683272 or E-order number (SEG): 60006653273 or E-order number (SEG): 6000666

Contact information can be found at www.mafi .se.

Rev 4

MAFI 3263*One-Direction Offset Family

9


Clamps S355MC FZV 2.4 (3272)



Threaded rods M12 8.8 FZV 4.8 (3272)



3263/3265 780 240 60 7.5

3272 1000 350 60 24

3273 380 230 60 6.7

Product optionsMAFI 3265, 400 mm tube offset kit that fi ts Ø 89 - Ø 114 mm

MAFI 3272

MAFI 3263/3265

MAFI 3273

Tightening torque

Equipment pole

Parent pole/leg


*Article MAFI 3263/3272/3273

Art. no 3263 & 3273:Ø 60 – 76 mm

Art. no 3265:Ø 89 – 114 mm

40 × 40 mmup to 120 × 120 mm

40 × 40 mm up to120 × 120 mm

Art. no 3263, 3265 & 3273:Ø 25 – 169 mm

Art. no 3272:Ø 48 – 193 mm


U-bolts M12: 31 Nm

Rev 4

EN 1090

MAFI 3263

MAFI 3272

MAFI 3273

Content of kit


*Article MAFI 3263/3272/3273

Designed to allow an equipment pole to be offset froma parent pole or tower leg.

FlexibilityThe 3263, 3265 and 3273 brackets can be mounted on any vertical round member from Ø 25 – 169 mm and also on vertical angel sections. The offset pole can be Ø 60.3 mmor Ø 76.1 mm with the standard Ø 76 mm U bolts supplied,or optionally up to Ø 114.3 mm.

The 3273 provide a maximum c/c offset of 230 mm and the 3263 and 3265 provide a maximum c/c offset of 420 mm respectively 400 mm. The 3272 fi ts round members fromØ 48 – 193 mm and provides a maximum offset of800 mm. The 3272 incorporates a double clamp to cope with the high torque loads impose by antennas at a large offset.





Rev 4

MAFI 3263*One-Direction Offset Family

10

Product nr. Max offset (mm)

3273 230

3263 420

3265 400

3272 800

Resisting torque per single bracket

Parent Pole ø (mm)Torque (Nm)MAFI 3263/65, 3273

Torque (Nm)MAFI 3272

42.3 152 -

48.3 178 356

60.3 230 460

76.1 298 596

88.9 353 706

101.6 408 816

114.3 462 924

152.4 627 1254

168.9 698 1396

Mresisting

Fwind

Fmass

Ft


*Article MAFI 3263/3272/3273

Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check thatthe supporting structure can safely carry the loads appliedto it by the MAFI product.

Vertical loadMax Supported Equipment mass MAFI3263/3265/3273 = 120 kg

Max Supported Equipment mass MAFI 3272 = 60 kg

Ultimate Transient Man-Load MAFI3263/3265/3272/3273 = 2.4 kN

Rotational slip resistanceWhen high side forces can be expected, use the tables below to check for rotational slip when mounting on a circular pole. Use ultimate loads and equipment offset to calculatethe applied torque.

Rev 4

MAFI 3268*SymmetricOffset Family—Designed to provide support for two similar antennas offset symmetrically from a central parent pole.


• Two lengts for optimized installation.

• Double or triple installation of antennas.

11

Product nr. Max offset (mm)

3273 230

3263 420

3265 400

3272 800



Torque (Nm)MAFI 3272

42.3 152 -

48.3 178 356

60.3 230 460

76.1 298 596

88.9 353 706

101.6 408 816

114.3 462 924

152.4 627 1254

168.9 698 1396

Mresisting

Fwind

Fmass

Ft


*Article MAFI 3263/3272/3273


Vertical loadMax Supported Equipment mass MAFI3263/3265/3273 = 120 kg

Max Supported Equipment mass MAFI 3272 = 60 kg

Ultimate Transient Man-Load MAFI3263/3265/3272/3273 = 2.4 kN


Rev 4

MAFI 3268*SymmetricOffset Family—Designed to provide support for two similar antennas offset symmetrically from a central parent pole.


• Two lengts for optimized installation.

• Double or triple installation of antennas.

12


Clamps S355MC FZV 2



Threaded rods M12 8.8 FZV 4


3268 1000 300 150 12.5

3270 2000 300 150 32

Product optionsMAFI 44040, U-bolt kit for tube Ø 89 – 114 mm.

Tightening torque

Equipment pole

Parent pole/leg

© 2017 MAFI AB. All rights reserved

*Article MAFI 3268/3270

Ø 60 – 76 mm

Ø 76 – 169 mm

Threaded rod M12: 31 Nm

U-bolts M12: 31 Nm

MAFI 3270

MAFI 3268

Rev 5

EN 1090

Content of kit MAFI 3270

MAFI 3268



Designed to provide support for two similar antennas offset symmetrically from a central parent pole. A third antenna may be mounted on the parent pole.

FlexibilityFits any round member from Ø 76 – 169 mm.The offset poles can be Ø 60.3 or 76.1 mm and maybe specifi ed in any length. The 3268 gives a c/c distance between the outer antennas of 800 mm, and the 3270gives a c/c distance between the outer antennas of 1700 mm.



3268 or E-order number (SEG): 60006693270 or E-order number (SEG): 6000670


MAFI 3268*Symmetric Offset Family

Rev 5

13


Clamps S355MC FZV 2





3268 1000 300 150 12.5

3270 2000 300 150 32

Product optionsMAFI 44040, U-bolt kit for tube Ø 89 – 114 mm.

Tightening torque

Equipment pole

Parent pole/leg



Ø 60 – 76 mm

Ø 76 – 169 mm

Threaded rod M12: 31 Nm

U-bolts M12: 31 Nm

MAFI 3270

MAFI 3268

Rev 5

EN 1090

Content of kit MAFI 3270

MAFI 3268



Designed to provide support for two similar antennas offset symmetrically from a central parent pole. A third antenna may be mounted on the parent pole.

FlexibilityFits any round member from Ø 76 – 169 mm.The offset poles can be Ø 60.3 or 76.1 mm and maybe specifi ed in any length. The 3268 gives a c/c distance between the outer antennas of 800 mm, and the 3270gives a c/c distance between the outer antennas of 1700 mm.





MAFI 3268*Symmetric Offset Family

Rev 5

14

Ultimate Torque Capacity per bracket

Parent Pole ø (mm) Torque (Nm)

76.1 298

88.9 353

101.6 408

114.3 462

152.4 627

168.9 698

FwindFwind

FmassFmass

Ft




Vertical loadMax Supported Equipment mass (Fmass) MAFI 3268 = 90 kg

Max Supported Equipment mass (Fmass) MAFI 3270 = 60 kg

Ultimate Transient Man-Load (Ft)= 2.4 kN

Horizontal load Ultimate transient horizontal load per bracket (Fwind) MAFI 3268 = 2000 NUltimate transient horizontal loadper bracket (Fwind) MAFI 3270 = 2000 N.

Rotational slip resistanceWhen asymetyric forces can be expected, for exampleif the equipment area differs between offset arms,use the table below to check for rotational slipwhen mounting on a circular pole.Use ultimate loads to calculate the resulting torque.

Rev 5

MAFI 3274Small UniversalPole Mount—Designed for mounting an equipment pole on a parent pole or tower leg. The kit consists of a pair of brackets with all necessary fi xings.


• Simplifi es close tube to tube mounting.

• Suitable for a wide range of tube dimensions.

15



76.1 298

88.9 353

101.6 408

114.3 462

152.4 627

168.9 698

FwindFwind

FmassFmass

Ft




Vertical loadMax Supported Equipment mass (Fmass) MAFI 3268 = 90 kg

Max Supported Equipment mass (Fmass) MAFI 3270 = 60 kg

Ultimate Transient Man-Load (Ft)= 2.4 kN

Horizontal load Ultimate transient horizontal load per bracket (Fwind) MAFI 3268 = 2000 NUltimate transient horizontal loadper bracket (Fwind) MAFI 3270 = 2000 N.

Rotational slip resistanceWhen asymetyric forces can be expected, for exampleif the equipment area differs between offset arms,use the table below to check for rotational slipwhen mounting on a circular pole.Use ultimate loads to calculate the resulting torque.

Rev 5

MAFI 3274Small UniversalPole Mount—Designed for mounting an equipment pole on a parent pole or tower leg. The kit consists of a pair of brackets with all necessary fi xings.


• Simplifi es close tube to tube mounting.

• Suitable for a wide range of tube dimensions.

16


Clamps S355MC FZV 6

Threaded rod M10 8.8 FZV 4

Nuts M10 8.8 FZV 20

Washer M10 8.8 FZV 12


3274 410 110 50 5.8

Product optionsTubes of various lengths and diameter can be ordered from MAFI.

Tightening torque

Equipment pole

Parent pole/leg


Article MAFI 3274

Ø 48 – 114.3 mm

40 × 40 up to 80 × 80 mm

Ø 25 – 114.3 mm

Threaded rods: 18 Nm

Rev 2

EN 1090


Article MAFI 3274

Designed for mounting an equipment pole on a parentpole or tower leg. The kit consists of a pair of bracketswith all necessary fi xings.

FlexibilityCan be mounted on any round member fromØ 25 – 114 mm as well as equal-angle or square section members up to 80 × 80 mm. Equipment polescan range from Ø 48 – 114 mm.



3274 or E-order number (SEG): 6000688

Contact information can be found at www.mafi .se.Content of kit

Rev 2

MAFI 3274Small Universal Pole Mount

17


Clamps S355MC FZV 6


Nuts M10 8.8 FZV 20

Washer M10 8.8 FZV 12


3274 410 110 50 5.8


Tightening torque

Equipment pole

Parent pole/leg


Article MAFI 3274

Ø 48 – 114.3 mm

40 × 40 up to 80 × 80 mm

Ø 25 – 114.3 mm


Rev 2

EN 1090


Article MAFI 3274

Designed for mounting an equipment pole on a parentpole or tower leg. The kit consists of a pair of bracketswith all necessary fi xings.

FlexibilityCan be mounted on any round member fromØ 25 – 114 mm as well as equal-angle or square section members up to 80 × 80 mm. Equipment polescan range from Ø 48 – 114 mm.




Contact information can be found at www.mafi .se.Content of kit

Rev 2

MAFI 3274Small Universal Pole Mount

18



42.3 152

48.3 178

60.3 230

76.1 298

88.9 353

101.6 408

114.3 462


Article MAFI 3274


Vertical loadMax Supported Equipment mass (includingweight of offsetpole = 250 kg

Ultimate Transient Man-Load = 2.4 kN

Horizontal load Ultimate transient horizontal load per bracket = 4000N


Fmass

FHorizontal

Mresisting

Fwind

Rev 2

MAFI 3610*Raking Tower Leg Offset Family—Designed for mounting an equipment pole on a raking parent pole or tower leg. The kits consists of a pairof brackets with all necessary fi xings.


• Simplifi es installation on raking towers.

• Suitable for L profi les and round members.

19



42.3 152

48.3 178

60.3 230

76.1 298

88.9 353

101.6 408

114.3 462


Article MAFI 3274


Vertical loadMax Supported Equipment mass (includingweight of offsetpole = 250 kg


Horizontal load Ultimate transient horizontal load per bracket = 4000N


Fmass

FHorizontal

Mresisting

Fwind

Rev 2

MAFI 3610*Raking Tower Leg Offset Family—Designed for mounting an equipment pole on a raking parent pole or tower leg. The kits consists of a pairof brackets with all necessary fi xings.


• Simplifi es installation on raking towers.


20


Clamps S355MC FZV 4






3610 440 280 80 11.8

3613 500 400 100 16.5

Product optionsMAFI 2867-1; U-bolt kit for attaching Ø 114 equipment tube.

Large clamps (MAFI 3613)

Small clamps (MAFI 3610)

Shared offset brackets

Tightening torque

Equipment pole

Parent pole/leg



Ø 60 – 76 mm

(Ø 114 mm as option)

Art. no. 3610:60 × 60 – 120 × 120 mm

Art. no. 3613:120 × 120 – 200 × 200 mm

Art. no. 3610:60 × 60 – 120 × 120 mm

Art. no. 3613:120 × 120 – 200 × 200 mm

Art. no. 3610:Ø 76.1 – 139.7 mm

Art. no. 3613:Ø 139.7 – 244.5 mm

Bolt M16: 210 Nm


U-bolts M12: 31 Nm

Rev 3

EN 1090

MAFI 3610Content of kit




Designed for mounting an equipment poleon a raking parent pole or tower leg. The kits consistsof a pair of brackets with all necessary fi xings.

FlexibilityThe 3610 can be mounted on any round member fromØ76 – 139 mm as well as equal-angle or square section members from 60 × 60 – 120 × 120 mm, while the 3613 canbe mounted on any round member from Ø 139 – 245 mmas well as equal-angle or square section members from120 × 120 – 200 × 200 mm.Offset poles for either kit can range from Ø 60 – 114 mmwith a maximum upper offset of 350 mm c/c anda lower fi xed offset of 250 mm c/c.





MAFI 3610

Rev 3

MAFI 3610*Raking Tower Leg Offset Family

21


Clamps S355MC FZV 4






3610 440 280 80 11.8

3613 500 400 100 16.5


Large clamps (MAFI 3613)

Small clamps (MAFI 3610)


Tightening torque

Equipment pole

Parent pole/leg



Ø 60 – 76 mm

(Ø 114 mm as option)

Art. no. 3610:60 × 60 – 120 × 120 mm

Art. no. 3613:120 × 120 – 200 × 200 mm

Art. no. 3610:60 × 60 – 120 × 120 mm

Art. no. 3613:120 × 120 – 200 × 200 mm

Art. no. 3610:Ø 76.1 – 139.7 mm

Art. no. 3613:Ø 139.7 – 244.5 mm

Bolt M16: 210 Nm


U-bolts M12: 31 Nm

Rev 3

EN 1090





Designed for mounting an equipment poleon a raking parent pole or tower leg. The kits consistsof a pair of brackets with all necessary fi xings.

FlexibilityThe 3610 can be mounted on any round member fromØ76 – 139 mm as well as equal-angle or square section members from 60 × 60 – 120 × 120 mm, while the 3613 canbe mounted on any round member from Ø 139 – 245 mmas well as equal-angle or square section members from120 × 120 – 200 × 200 mm.Offset poles for either kit can range from Ø 60 – 114 mmwith a maximum upper offset of 350 mm c/c anda lower fi xed offset of 250 mm c/c.





MAFI 3610

Rev 3

MAFI 3610*Raking Tower Leg Offset Family

22

MAFI 3611*VerticalTower Leg Offset Family—Designed for mounting an equipment pole on a vertical parent pole or tower leg. The kits consists of a pair of brackets with all necessary fi xings.


• Simplifi es installation on vertical towers.




42.3 152

48.3 178

60.3 230

76.1 298

88.9 353

101.6 408

114.3 462

152.4 627

168.9 698

Mresisting

Fwind

Fmass

Ft

When high side forces can be expected, use the tables opposite to check for rotational slip when mounting on a circular pole. Use ultimate loads and equipment offset to calculate the applied torque.



Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check that the supporting structure can safely carry the loads appliedto it by the MAFI product.

Vertical loadMax Supported Equipment mass (including weightof offset pole) MAFI 3610/3613 = 250 kg

Ultimate Transient Man-Load (Ft) MAFI 3610/3613 = 2.4 kN

Horizontal load Ultimate transient horizontal load peroffset arm (Fwind) = 4000 N

Rotational slip resistanceWhen high side forces can be expected, use the table belowto check for rotational slip when mounting on a circular pole. Use ultimate loads and equipment offset to calculate the applied torque.

Rev 3

23

MAFI 3611*VerticalTower Leg Offset Family—Designed for mounting an equipment pole on a vertical parent pole or tower leg. The kits consists of a pair of brackets with all necessary fi xings.


• Simplifi es installation on vertical towers.




42.3 152

48.3 178

60.3 230

76.1 298

88.9 353

101.6 408

114.3 462

152.4 627

168.9 698

Mresisting

Fwind

Fmass

Ft

When high side forces can be expected, use the tables opposite to check for rotational slip when mounting on a circular pole. Use ultimate loads and equipment offset to calculate the applied torque.



Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check that the supporting structure can safely carry the loads appliedto it by the MAFI product.

Vertical loadMax Supported Equipment mass (including weightof offset pole) MAFI 3610/3613 = 250 kg

Ultimate Transient Man-Load (Ft) MAFI 3610/3613 = 2.4 kN

Horizontal load Ultimate transient horizontal load peroffset arm (Fwind) = 4000 N

Rotational slip resistanceWhen high side forces can be expected, use the table belowto check for rotational slip when mounting on a circular pole. Use ultimate loads and equipment offset to calculate the applied torque.

Rev 3

24


Clamps S355MC FZV 4






3611 500 280 80 12.3

3612 500 280 80 11.1

3614 440 400 100 17.0

3615 440 400 100 16.1


Small clamps (MAFI 3611 & 3612)

Large clamps (MAFI 3614 & 3615)


Tightening torque

Equipment pole

Parent pole/leg


*Article MAFI 3611/3612/3614/3615

Ø 60 – 76 mm(114 mm as option)

Art. no. 3611 & 3612:60 × 60 – 120 × 120 mm

Art. no. 3614 & 3615:120 × 120 – 200 × 200 mm

Art. no. 3611 & 3612:60 × 60 – 120 × 120 mm

Art. no. 3614 & 3615:120 × 120 – 200 × 200 mm

Art. no. 3611 & 3612:Ø 76.1 – 139.7 mm

Art. no. 3614 & 3615:Ø 139.7 – 244.5 mm

Bolt M16: 210 Nm


U-bolts M12: 31 Nm

Rev 3

EN 1090

MAFI 3612

MAFI 3614 MAFI 3615

MAFI 3611


*Article MAFI 3611/3612/3614/3615

Designed for mounting an equipment pole on a vertical parent pole or tower leg. The kits consists of a pair of brackets with all necessary fi xings.

FlexibilityThe 3611/3612 can be mounted on any round member from Ø 76 – 139 mm as well as equal-angle or square section members from 60 × 60 – 120 × 120 mm, while the 3614/3615 can be mounted on any round member fromØ 139 – 245 mm as well as equal angle or square section members from 120 × 120 – 200 × 200 mm.Offset poles for any of the kits can range fromØ 60– 114 mm. The small and large offset arms providemaximum c/c offsets of 250 mm and 350 mm respectively.




Contact information can be found at www.mafi .se

MAFI 3611*Vertical Tower Leg Offset Family

Rev 3

25


Clamps S355MC FZV 4






3611 500 280 80 12.3

3612 500 280 80 11.1

3614 440 400 100 17.0

3615 440 400 100 16.1


Small clamps (MAFI 3611 & 3612)

Large clamps (MAFI 3614 & 3615)


Tightening torque

Equipment pole

Parent pole/leg


*Article MAFI 3611/3612/3614/3615

Ø 60 – 76 mm(114 mm as option)

Art. no. 3611 & 3612:60 × 60 – 120 × 120 mm

Art. no. 3614 & 3615:120 × 120 – 200 × 200 mm

Art. no. 3611 & 3612:60 × 60 – 120 × 120 mm

Art. no. 3614 & 3615:120 × 120 – 200 × 200 mm

Art. no. 3611 & 3612:Ø 76.1 – 139.7 mm

Art. no. 3614 & 3615:Ø 139.7 – 244.5 mm

Bolt M16: 210 Nm


U-bolts M12: 31 Nm

Rev 3

EN 1090

MAFI 3612

MAFI 3614 MAFI 3615

MAFI 3611


*Article MAFI 3611/3612/3614/3615

Designed for mounting an equipment pole on a vertical parent pole or tower leg. The kits consists of a pair of brackets with all necessary fi xings.

FlexibilityThe 3611/3612 can be mounted on any round member from Ø 76 – 139 mm as well as equal-angle or square section members from 60 × 60 – 120 × 120 mm, while the 3614/3615 can be mounted on any round member fromØ 139 – 245 mm as well as equal angle or square section members from 120 × 120 – 200 × 200 mm.Offset poles for any of the kits can range fromØ 60– 114 mm. The small and large offset arms providemaximum c/c offsets of 250 mm and 350 mm respectively.




Contact information can be found at www.mafi .se

MAFI 3611*Vertical Tower Leg Offset Family

Rev 3

26

MAFI 5310*JointPlate Kit—Designed to provide perpendicular joints betweensolid or thick-walled circular member and square tubes.


• Smooth and easy installation.

• Tight mounted against towers and masts.



42.3 152

48.3 178

60.3 230

76.1 298

88.9 353

101.6 408

114.3 462

152.4 627

168.9 698

Mresisting

Fwind

Fmass

Ft


*Article MAFI 3611/3612/3614/3615


Vertical loadMax Supported Equipment mass (including weightof offset pole) MAFI 3611/12/14/15 = 250 kg

Ultimate Transient Man-Load MAFI 3611/3612 = 2.4 kN


Horizontal load Ultimate transient horizontal load per offset arm (Fwind)= 4000 N


Rev 3

27

MAFI 5310*JointPlate Kit—Designed to provide perpendicular joints betweensolid or thick-walled circular member and square tubes.






42.3 152

48.3 178

60.3 230

76.1 298

88.9 353

101.6 408

114.3 462

152.4 627

168.9 698

Mresisting

Fwind

Fmass

Ft


*Article MAFI 3611/3612/3614/3615


Vertical loadMax Supported Equipment mass (including weightof offset pole) MAFI 3611/12/14/15 = 250 kg



Horizontal load Ultimate transient horizontal load per offset arm (Fwind)= 4000 N


Rev 3

28


Plates S355MC FZV 2

U-bolts 8.8 FZV 4

Nuts and washers 8.8 FZV 24


5310 150 110 40 2.8

5311 180 110 40 3.0

5312 180 110 40 3.1

Product optionsMAFI 5320, 5321: Crossover kit for members Ø 76.1, Ø 114.3, 50 × 50 – 60 × 60 mm.

Tubes of various lengths and diameter can be ordered from MAFI.

Tightening torque

Equipment pole

Parent pole/leg


*Article MAFI 5310/5311/5312

50 × 50 – 60 × 60 mm

Art. 5312:

50 × 50 – 60 × 60 mm

Art. 5310:Ø 25 – 35 mm

Art. 5311:Ø35 – 60 mm

U-bolt M12: 15 Nm

Rev 2

EN 1090

U-bolt in MAFI 5311

U-bolt in MAFI 5310

U-bolt in MAFI 5312


*Article MAFI 5310/5311/5312

Designed to provide perpendicular joints between solidor thick-walled circular member and square tubes.

FlexibilityFits parent poles ranging from Ø 25 – 60 mmand square beams ranging from 50 × 50 – 60 × 60 mm.



5310 or E-order number (SEG): 60006715311 or E-order number (SEG): 60006725312 or E-order number (SEG): 6000673


MAFI 5310*JointPlate Kit

Rev 2

× 2Content of kit

MAFI 5310

MAFI 5312MAFI 5311

29


Plates S355MC FZV 2

U-bolts 8.8 FZV 4

Nuts and washers 8.8 FZV 24


5310 150 110 40 2.8

5311 180 110 40 3.0

5312 180 110 40 3.1

Product optionsMAFI 5320, 5321: Crossover kit for members Ø 76.1, Ø 114.3, 50 × 50 – 60 × 60 mm.


Tightening torque

Equipment pole

Parent pole/leg


*Article MAFI 5310/5311/5312

50 × 50 – 60 × 60 mm

Art. 5312:

50 × 50 – 60 × 60 mm

Art. 5310:Ø 25 – 35 mm

Art. 5311:Ø35 – 60 mm

U-bolt M12: 15 Nm

Rev 2

EN 1090

U-bolt in MAFI 5311

U-bolt in MAFI 5310

U-bolt in MAFI 5312


*Article MAFI 5310/5311/5312

Designed to provide perpendicular joints between solidor thick-walled circular member and square tubes.

FlexibilityFits parent poles ranging from Ø 25 – 60 mmand square beams ranging from 50 × 50 – 60 × 60 mm.





MAFI 5310*JointPlate Kit

Rev 2

× 2Content of kit

MAFI 5310

MAFI 5312MAFI 5311

30

MAFI 5320*Crossover Kit—Designed to provide perpendicular joints betweencircular members and square tubes.


• Simplifi es installation of round tubes mountedto square beams.


*Article MAFI 5310/5311/5312


Vertical loadMax Supported Equipment mass per joint Fmass = 100 kg

Tightening torque Recommended tightening torque, with oiled nuts and bolts in delivery state Mt= 15 Nm.

Rev 2

Fmass

Mt

31

MAFI 5320*Crossover Kit—Designed to provide perpendicular joints betweencircular members and square tubes.


• Simplifi es installation of round tubes mountedto square beams.


*Article MAFI 5310/5311/5312


Vertical loadMax Supported Equipment mass per joint Fmass = 100 kg

Tightening torque Recommended tightening torque, with oiled nuts and bolts in delivery state Mt= 15 Nm.

Rev 2

Fmass

Mt

32


Bracket S355MC FZV 1

Plates S355MC FZV 2

U-bolts 8.8 FZV or A480 2

Nuts and washers 8.8 FZV -


5320 220 140 50 2.4 kg

5321 250 150 50 2.7 kg

Product optionsMAFI 5310, 5311, 5312: Joint plate kits for members Ø 25 – 60 mm,50 × 50 – 60 × 60 mm.


Tightening torque

Square tube

Circular tube



50 × 50 – 60 × 60 mm

Art. 5320:Ø 76.1 mm

Art. 5321:Ø 114.3 mm

U-bolt M12: 15 Nm

MAFI 5320 MAFI 5321

Rev 2

EN 1090



Designed to provide perpendicular joints between circular members and square tubes.

FlexibilityMAFI 5320 fi ts circular tubes of Ø 76.1 mm and square beams ranging from 50 × 50 – 60 × 60 mm. MAFI 5321 fi tscircular tubes of Ø 114.3 mm and square beams rangingfrom 50 × 50 – 60 × 60 mm.

Detailed design dataFor use when designing sites, detailed design data for this product can be found at www.mafi .se.




Content of kit

MAFI 5320

MAFI 5321

Rev 2

MAFI 5320*CrossoverKit

33



Plates S355MC FZV 2




5320 220 140 50 2.4 kg

5321 250 150 50 2.7 kg

Product optionsMAFI 5310, 5311, 5312: Joint plate kits for members Ø 25 – 60 mm,50 × 50 – 60 × 60 mm.


Tightening torque

Square tube

Circular tube



50 × 50 – 60 × 60 mm

Art. 5320:Ø 76.1 mm

Art. 5321:Ø 114.3 mm

U-bolt M12: 15 Nm

MAFI 5320 MAFI 5321

Rev 2

EN 1090



Designed to provide perpendicular joints between circular members and square tubes.

FlexibilityMAFI 5320 fi ts circular tubes of Ø 76.1 mm and square beams ranging from 50 × 50 – 60 × 60 mm. MAFI 5321 fi tscircular tubes of Ø 114.3 mm and square beams rangingfrom 50 × 50 – 60 × 60 mm.





Content of kit

MAFI 5320

MAFI 5321

Rev 2

MAFI 5320*CrossoverKit

34

MAFI 43249*CombiclampFamily—Designed to provide perpendicular jointsbetween two circular members.




Ultimate torque capacity


76.1 298

114.3 462

Mr

Fwind

Fmass

Fr




Vertical loadMax Supported Equipment mass Fmass = 100 kg

Lateral reaction forceUltimate lateral reaction force Fr = 3875 N

Rotational slip resistanceWhen high side forces can be expected, use the tablebelow to check for rotational slip. Use ultimate loadsto calculate the applied torque.

Rev 2

35

MAFI 43249*CombiclampFamily—Designed to provide perpendicular jointsbetween two circular members.




Ultimate torque capacity


76.1 298

114.3 462

Mr

Fwind

Fmass

Fr





Lateral reaction forceUltimate lateral reaction force Fr = 3875 N

Rotational slip resistanceWhen high side forces can be expected, use the tablebelow to check for rotational slip. Use ultimate loadsto calculate the applied torque.

Rev 2

36






43249 280 280 100 7.8

43248 280 280 100 6.9

43247 230 230 75 4.4

43246 210 210 75 3.2


Tightening torque

Parent pole/leg


*Article MAFI 43246/43247/43248/43249

Art. no. 43249:

Art. no. 43248:

Art. no. 43247:

Art. no. 43246:

Ø 114.3 mm

Ø 114.3 mmØ 76.3 mm

Ø 76.1 mm

Ø 60.3 mmØ 48.3 mm

U-bolt M12: 15 Nm

U-bolt M16: 20 Nm

MAFI 43248MAFI 43247

MAFI 43249

MAFI 43246

Rev 3

EN 1090


*Article MAFI 43246/43247/43248/43249

Designed to provide perpendicular joints betweentwo circular members.

FlexibilityMAFI 43249 joints two circular tubes of Ø 114.3 mm.MAFI 43248 joints one circular tube of Ø 114.3 mmto a circular tube of Ø 76.1 mm.MAFI 43247 joints two circular tubes fo Ø 76.1 mm.MAFI 43246 joints one circular tube of Ø 60.3 mmto a circular tube of Ø 48.3 mm. The products are delivered with all necessary bolts and nuts.



43249432484324743246


Rev 3

MAFI 43249

MAFI 43248 MAFI 43247

MAFI 43246

MAFI 43249*CombiclampFamily

37






43249 280 280 100 7.8

43248 280 280 100 6.9

43247 230 230 75 4.4

43246 210 210 75 3.2


Tightening torque

Parent pole/leg


*Article MAFI 43246/43247/43248/43249

Art. no. 43249:

Art. no. 43248:

Art. no. 43247:

Art. no. 43246:

Ø 114.3 mm

Ø 114.3 mmØ 76.3 mm

Ø 76.1 mm

Ø 60.3 mmØ 48.3 mm

U-bolt M12: 15 Nm

U-bolt M16: 20 Nm

MAFI 43248MAFI 43247

MAFI 43249

MAFI 43246

Rev 3

EN 1090


*Article MAFI 43246/43247/43248/43249

Designed to provide perpendicular joints betweentwo circular members.

FlexibilityMAFI 43249 joints two circular tubes of Ø 114.3 mm.MAFI 43248 joints one circular tube of Ø 114.3 mmto a circular tube of Ø 76.1 mm.MAFI 43247 joints two circular tubes fo Ø 76.1 mm.MAFI 43246 joints one circular tube of Ø 60.3 mmto a circular tube of Ø 48.3 mm. The products are delivered with all necessary bolts and nuts.



43249432484324743246


Rev 3

MAFI 43249

MAFI 43248 MAFI 43247

MAFI 43246

MAFI 43249*CombiclampFamily

38

MAFI 4418*3-SectorAntenna Mount—Designed to accommodate three largepanel antennas attached to a single spine pole.


• Handles three large antennas.

• Flexible and easy to assemble.

Ultimate Torque Capacity


48.3 178

60.3 230

76.1 298

114.3 462

Fmass

Fr

Mr

Frot.

Frot.


*Article MAFI 43246/43247/43248/43249



Lateral reaction force Ultimate lateral reaction force Fr = 2000 N

Axial moment Ultimate axial moment Mr: 43249 = 1000 Nm

43248 = 350 Nm

43247 = 350 Nm

43246 = 150 Nm

Rotational slip resistanceWhen forces that attempt to rotate the bracket around the tube are to be expected, use the table below to check for rotational slip. Use ultimate loads to calculate the applied torque.

Rev 3

39

MAFI 4418*3-SectorAntenna Mount—Designed to accommodate three largepanel antennas attached to a single spine pole.


• Handles three large antennas.

• Flexible and easy to assemble.

Ultimate Torque Capacity


48.3 178

60.3 230

76.1 298

114.3 462

Fmass

Fr

Mr

Frot.

Frot.


*Article MAFI 43246/43247/43248/43249



Lateral reaction force Ultimate lateral reaction force Fr = 2000 N

Axial moment Ultimate axial moment Mr: 43249 = 1000 Nm

43248 = 350 Nm

43247 = 350 Nm

43246 = 150 Nm

Rotational slip resistanceWhen forces that attempt to rotate the bracket around the tube are to be expected, use the table below to check for rotational slip. Use ultimate loads to calculate the applied torque.

Rev 3

40


Clamps S355MC FZV 4



Spacer bushings S355MC FZV 6

Bolts, nuts and washers M12 8.8 FZV -


4415 390 230 120 13.5

4418 390 275 120 15.5


MAFI 4415

MAFI 4418

Tightening torque

Equipment pole

Parent pole/leg



Ø 60.3 – 76.1 mm

Ø 76 – 114.3 mm

Bolts M12: 31 – 80 Nm

U-bolts M12: 31 Nm

Rev 5

EN 1090





Designed to accommodate three large panel antennas attached to a single spine pole.

FlexibilityThe mounts will fi t spine poles ranging from Ø 76 – 114.3 mm. MAFI 4415 provides an offset of 126 mm from the equipment pole center to the face of the spine pole.MAFI 4418 provides an offset of 226 mm from the equipment pole center to the face of the spine pole. The equipment poles can be Ø 60.3 or 76.1 mm.


How to orderTo order this kit, please contact MAFI quoting article number:



Rev 5

MAFI 4418*3-Sector Antenna Mount

41


Clamps S355MC FZV 4



Spacer bushings S355MC FZV 6

Bolts, nuts and washers M12 8.8 FZV -


4415 390 230 120 13.5

4418 390 275 120 15.5


MAFI 4415

MAFI 4418

Tightening torque

Equipment pole

Parent pole/leg



Ø 60.3 – 76.1 mm

Ø 76 – 114.3 mm

Bolts M12: 31 – 80 Nm

U-bolts M12: 31 Nm

Rev 5

EN 1090





Designed to accommodate three large panel antennas attached to a single spine pole.

FlexibilityThe mounts will fi t spine poles ranging from Ø 76 – 114.3 mm. MAFI 4415 provides an offset of 126 mm from the equipment pole center to the face of the spine pole.MAFI 4418 provides an offset of 226 mm from the equipment pole center to the face of the spine pole. The equipment poles can be Ø 60.3 or 76.1 mm.


How to orderTo order this kit, please contact MAFI quoting article number:



Rev 5

MAFI 4418*3-Sector Antenna Mount

42

Fmass

Ft

Fwind




Vertical loadMax Supported Equipment mass per offset tube (Fmass) = 60 kg

Ultimate Transient Person-Load (Ft)= 2.4 kN

Horizontal load Ultimate transient horizontal load per tube (Fwind) = 4000 N

Rev 5

MAFI 3510RafterBracket Kit—Designed to provide a pole mount on to rafters or roof trusses for tubes of Ø 60.3 – 114.3 mm.

43

Fmass

Ft

Fwind




Vertical loadMax Supported Equipment mass per offset tube (Fmass) = 60 kg

Ultimate Transient Person-Load (Ft)= 2.4 kN

Horizontal load Ultimate transient horizontal load per tube (Fwind) = 4000 N

Rev 5

MAFI 3510RafterBracket Kit—Designed to provide a pole mount on to rafters or roof trusses for tubes of Ø 60.3 – 114.3 mm.

44




Threaded rod M8 A4 14

Nuts M12,M8 8.8 FZV 76

Washer M12,M8 FZV 36


3510 210 160 120 6.0

Product optionsMAFI 4328, Foot for equipment pole.

MAFI 53001G, Rubber roof flange Ø 82 – 162 mm.



Tightening torque

Equipment pole

Mounting structure


Article MAFI 3510

Ø 60.3 – 114.3 mm

Wooden beams minimum:120 × 45 mm



Rev 2

EN 1090


Article MAFI 3510

Designed to provide a pole mount on to rafters or roof trusses for tubes of Ø 60.3 – 114.3 mm.

FlexibilityThe product can be mounted directly on to the wooden structure using through-mounts with large square washers on the back. The kit consist of high quality steel parts with hot dip galvanization treatment or from acid proof stainless steel.





Content of kitMAFI 4328Option

Rev 2

MAFI 3510RafterBracket Kit

45




Threaded rod M8 A4 14

Nuts M12,M8 8.8 FZV 76

Washer M12,M8 FZV 36


3510 210 160 120 6.0

Product optionsMAFI 4328, Foot for equipment pole.




Tightening torque

Equipment pole

Mounting structure


Article MAFI 3510

Ø 60.3 – 114.3 mm

Wooden beams minimum:120 × 45 mm



Rev 2

EN 1090


Article MAFI 3510

Designed to provide a pole mount on to rafters or roof trusses for tubes of Ø 60.3 – 114.3 mm.

FlexibilityThe product can be mounted directly on to the wooden structure using through-mounts with large square washers on the back. The kit consist of high quality steel parts with hot dip galvanization treatment or from acid proof stainless steel.





Content of kitMAFI 4328Option

Rev 2

MAFI 3510RafterBracket Kit

46

Ultimate Torque Capacity per Bracket


60.3 230

76.1 298

88.9 353

101.6 408

114.3 462


Article MAFI 3510


Vertical loadUltimate Fmass resistance = 3000 N

Ultimate Transient Man-Load = 2400 N

Ultimate FRd (reaction force to Fwind)= 10000 N

Rotational slip resistanceIn some cases the equipment pole can suffer torque loading;in these cases it is important to verify that the pole will not slip. To check this, the data from the torque resistance table can be used. The table below gives the ultimate torque capacity per cantilever for different pole diameters.

Mresisting

Fwind

Fmass

FRd1

FRd2

Rev 2

MAFI 2230*Telescopic Strut Support—Designed to provide fl exible bracing to a pole.The support can be fi tted as part of a new installationor it can be retrofi tted to an existing pole. All that is required is two structural attachment points within reach of the pole. The attachment points can be horizontal, vertical or anything inbetween. The kit consists of a pair of telescopic struts with feet and a pole attachment bracket.

47



60.3 230

76.1 298

88.9 353

101.6 408

114.3 462


Article MAFI 3510


Vertical loadUltimate Fmass resistance = 3000 N

Ultimate Transient Man-Load = 2400 N

Ultimate FRd (reaction force to Fwind)= 10000 N

Rotational slip resistanceIn some cases the equipment pole can suffer torque loading;in these cases it is important to verify that the pole will not slip. To check this, the data from the torque resistance table can be used. The table below gives the ultimate torque capacity per cantilever for different pole diameters.

Mresisting

Fwind

Fmass

FRd1

FRd2

Rev 2

MAFI 2230*Telescopic Strut Support—Designed to provide fl exible bracing to a pole.The support can be fi tted as part of a new installationor it can be retrofi tted to an existing pole. All that is required is two structural attachment points within reach of the pole. The attachment points can be horizontal, vertical or anything inbetween. The kit consists of a pair of telescopic struts with feet and a pole attachment bracket.

48


Struts S355 FZV 2

Strut foot S355MC FZV 2

Clamps S355MC FZV 2


Bolts M12 8.8 FZV 4

Nuts M12 and washers 8.8 FZV 16


2230/2233 1100 160 100 13.8

2231/2234 2100 160 100 20.3

2232/2235 3100 160 100 26.8

Product optionsMAFI 4328, Equipment pole foot.

2 × MAFI 3396, Clamp for tubes < Ø 76 mm.


Product X Length (m)Clamp widthØ (mm)

2230 1.0 – 1.4 76

2231 2.0 – 2.4 76

2232 3.0 – 3.4 76

2233 1.0 – 1.4 114

2234 2.0 – 2.4 114

2235 3.0 – 3.4 114

Tightening torque

Strut lengthand clamp width

Equipment pole


*Article MAFI 2230/2231/2232/2233/2234/2235

Art. no. 2230 - 2232:Ø 76.1 mm

Art. no. 2233 - 2235:Ø 114.3 mmOptional < Ø 76 mm

U-bolt: 31 Nm (Ø 76 mm)

46 Nm (Ø 114 mm)

M12 screws: 80 Nm

M16 screws: 100 Nm

Clamp set Ø 76 mm

Clamp set Ø 114 mm

Rev 1

EN 1090


*Article MAFI 2230/2231/2232/2233/2234/2235

Designed to provide fl exible bracing to a pole.The support can be fi tted as part of a new installation or it can be retrofi tted to an existing pole. All that is required is two structural attachment points within reach of the pole.The attachment points can be horizontal, vertical or anything inbetween. The kit consists of a pair of telescopic struts with feet and a pole attachment bracket.

FlexibilityThe 2230-family comprises three lengths of strut and two standard sizes of pole attachment-clamp available,to fi t poles Ø 76 or 114 mm.Please see the table on the next page.An optional pole attachment-clamp the 3396.Can fi t poles < Ø 76 mm.



2230 or E-order number (SEG): 60008652231 or E-order number (SEG): 60008662232 or E-order number (SEG): 60008672233 or E-order number (SEG): 60008682234 or E-order number (SEG): 60008692235 or E-order number (SEG): 6000870


Content of kitOption: MAFI 4328

Rev 1

MAFI 2230*Telescopic Strut Support

49


Struts S355 FZV 2

Strut foot S355MC FZV 2

Clamps S355MC FZV 2


Bolts M12 8.8 FZV 4

Nuts M12 and washers 8.8 FZV 16


2230/2233 1100 160 100 13.8

2231/2234 2100 160 100 20.3

2232/2235 3100 160 100 26.8

Product optionsMAFI 4328, Equipment pole foot.

2 × MAFI 3396, Clamp for tubes < Ø 76 mm.


Product X Length (m)Clamp widthØ (mm)

2230 1.0 – 1.4 76

2231 2.0 – 2.4 76

2232 3.0 – 3.4 76

2233 1.0 – 1.4 114

2234 2.0 – 2.4 114

2235 3.0 – 3.4 114

Tightening torque

Strut lengthand clamp width

Equipment pole


*Article MAFI 2230/2231/2232/2233/2234/2235

Art. no. 2230 - 2232:Ø 76.1 mm

Art. no. 2233 - 2235:Ø 114.3 mmOptional < Ø 76 mm

U-bolt: 31 Nm (Ø 76 mm)

46 Nm (Ø 114 mm)

M12 screws: 80 Nm

M16 screws: 100 Nm

Clamp set Ø 76 mm

Clamp set Ø 114 mm

Rev 1

EN 1090


*Article MAFI 2230/2231/2232/2233/2234/2235

Designed to provide fl exible bracing to a pole.The support can be fi tted as part of a new installation or it can be retrofi tted to an existing pole. All that is required is two structural attachment points within reach of the pole.The attachment points can be horizontal, vertical or anything inbetween. The kit consists of a pair of telescopic struts with feet and a pole attachment bracket.

FlexibilityThe 2230-family comprises three lengths of strut and two standard sizes of pole attachment-clamp available,to fi t poles Ø 76 or 114 mm.Please see the table on the next page.An optional pole attachment-clamp the 3396.Can fi t poles < Ø 76 mm.





Content of kitOption: MAFI 4328

Rev 1

MAFI 2230*Telescopic Strut Support

50

Designed to provide a secure mounting solution for a single Ericsson RRU with or withiout PSU. The Single RRU-mount can also be used in A2 confi gurations.


• Tube and wall mounting in the same product

• Can be used in conjunction with the PSU or the A2 unit.

MAFI 4020SingleRRU-Mount—


*Article MAFI 2230/2231/2232/2233/2234/2235


Load capacityEach strut is designed to take a maximum tension/compression force according to below:

Ø 76 mm tube clamp: Fstrut= 10 kN

Ø 114 mm tube clamp: Fstrut = 15 kN

Rev 1

FstrutFstrut

51

Designed to provide a secure mounting solution for a single Ericsson RRU with or withiout PSU. The Single RRU-mount can also be used in A2 confi gurations.


• Tube and wall mounting in the same product

• Can be used in conjunction with the PSU or the A2 unit.

MAFI 4020SingleRRU-Mount—

52


Clamps S355MC FZV 2


Threaded Rods M10 A4 or 8.8 FZV 4

Flange bolts M10 A4 4

Nuts M10 8.8 FZV 24

Washers FZV 16

Package dataLength (mm) Width (mm) Height (mm) Weight (kg)

230 210 85 4.3

Tightening torque

Compatible RRU-Models

Parent pole/leg


Article MAFI 4020

Ericsson RRU family and otherunits with horizontal c/c distanceof 146 mm (5 ¾”).

35 × 35 mmup to 80 × 80 mm

35 × 35 mmup to 80 × 80 mm

Ø 25 – 114 mm


Bolts M10: 41 Nm

Rev 3

EN 1090


Article MAFI 4020

Designed to provide a secure mounting solution for a single Ericsson RRU with or withiout PSU. The Single RRU-mountcan also be used in A2 confi gurations.

FlexibilityThe mount will fi t any round member fromØ 25 – 114 mm, or any equal-angle or square-sectionmember from 35 × 35 – 80 × 80 mm. It can alsobe used for wall mounting.





MAFI 4020SingleRRU-Mount

Rev 3

Content of kit

RRU with PSU RRU with A2

53


Clamps S355MC FZV 2


Threaded Rods M10 A4 or 8.8 FZV 4

Flange bolts M10 A4 4

Nuts M10 8.8 FZV 24

Washers FZV 16

Package dataLength (mm) Width (mm) Height (mm) Weight (kg)

230 210 85 4.3

Tightening torque

Compatible RRU-Models

Parent pole/leg


Article MAFI 4020

Ericsson RRU family and otherunits with horizontal c/c distanceof 146 mm (5 ¾”).

35 × 35 mmup to 80 × 80 mm

35 × 35 mmup to 80 × 80 mm

Ø 25 – 114 mm


Bolts M10: 41 Nm

Rev 3

EN 1090


Article MAFI 4020

Designed to provide a secure mounting solution for a single Ericsson RRU with or withiout PSU. The Single RRU-mountcan also be used in A2 confi gurations.

FlexibilityThe mount will fi t any round member fromØ 25 – 114 mm, or any equal-angle or square-sectionmember from 35 × 35 – 80 × 80 mm. It can alsobe used for wall mounting.





MAFI 4020SingleRRU-Mount

Rev 3

Content of kit

RRU with PSU RRU with A2

54

MAFI 4019-*RRU-Mount Family—Designed to provide a secure mounting solution fortwo, three or four Ericsson RRUs, with or without PSU.The double RRU mount, 4019-2, can also accomodatea confi guration with two A2 units.


• Easy to assemble RRU in the same level.

• Three models - Double, triple and quattro.

Fmass

Ftransient


Article MAFI 4020

Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check that

the supporting structure can safely carry the loads applied

to it by the MAFI product.

Load ResistanceMax equipment weight: 40 kg per equipment fi ttinginstance (Fmass ≈ 390 N).

An ultimate transient man-load of 2400 N (Ftransient)is also accepted.

Rev 3

55

MAFI 4019-*RRU-Mount Family—Designed to provide a secure mounting solution fortwo, three or four Ericsson RRUs, with or without PSU.The double RRU mount, 4019-2, can also accomodatea confi guration with two A2 units.


• Easy to assemble RRU in the same level.

• Three models - Double, triple and quattro.

Fmass

Ftransient


Article MAFI 4020

Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check that

the supporting structure can safely carry the loads applied

to it by the MAFI product.

Load ResistanceMax equipment weight: 40 kg per equipment fi ttinginstance (Fmass ≈ 390 N).

An ultimate transient man-load of 2400 N (Ftransient)is also accepted.

Rev 3

56

Part list

Parts MaterialQuantity4019-2

Quantity4019-3

Quantity4019-4

Clamps S355MC FZV 4 4 4

Sheet profi le S355MC FZV - 2 2

Threaded Rods M12 8.8 FZV 4 4 4

Bolts M10 8.8 FZV 8 8 8

Flange bolts M10 A4 8 12 16

Bushings S355J2H FZV 4 8 8

Nuts M10 8.8 FZV 28 36 36

Washers FZV 20 24 24


4019-2 360 230 90 5.8

4019-3 430 360 60 10.6

4019-4 810 260 60 11.5

Tightening torque

Compatible RRU-models

Parent pole/leg


*Article MAFI 4019-2/3/4

Ericsson RRU family and other units with horizontalc/c distance of 146 mm (5 ¾”)

4019-3:40 × 40 mm up to 80 × 80 mm

4019-4:40 × 40 mm up to 80 × 80 mm

40 × 40 mmup to 80 × 80mm

4019-2: Ø 40 – 114 mm

4019-3: Ø 25 – 114 mm

4019-4: Ø 25 – 114 mm

Threaded rods M10:18 Nm or 26Nm

Bolts M10: 41 Nm

Rev 3

EN 10904019-4

MAFI 4019-2

MAFI 4019-3MAFI 4019-4

4019-3

4019-2



Designed to provide a secure mounting solution for two, three or four Ericsson RRUs, with or without PSU.The double RRU mount, 4019-2, can also accomodatea confi guration with two A2 units.

FlexibilityThe 4019-3 and 4019-4 will fi t any round member fromØ 25 – 114 mm, or any equal-angle or square-sectionmember from 40 × 40 – 80 × 80 mm.The 4019-2 will fi t any round member from Ø 40 – 114 mm,or any square-section member from 40 × 40 – 80 × 80 mm.



4019-2 or E-order number (SEG): 60006844019-3 or E-order number (SEG): 60006854019-4 or E-order number (SEG): 6000686


MAFI 4019-3

MAFI 4019-2

MAFI 4019-4

× 2Content of kit

Rev 3

MAFI 4019-*RRU-MountFamily

57

Part list

Parts MaterialQuantity4019-2

Quantity4019-3

Quantity4019-4

Clamps S355MC FZV 4 4 4

Sheet profi le S355MC FZV - 2 2

Threaded Rods M12 8.8 FZV 4 4 4

Bolts M10 8.8 FZV 8 8 8

Flange bolts M10 A4 8 12 16

Bushings S355J2H FZV 4 8 8

Nuts M10 8.8 FZV 28 36 36

Washers FZV 20 24 24


4019-2 360 230 90 5.8

4019-3 430 360 60 10.6

4019-4 810 260 60 11.5

Tightening torque


Parent pole/leg



Ericsson RRU family and other units with horizontalc/c distance of 146 mm (5 ¾”)

4019-3:40 × 40 mm up to 80 × 80 mm

4019-4:40 × 40 mm up to 80 × 80 mm

40 × 40 mmup to 80 × 80mm

4019-2: Ø 40 – 114 mm

4019-3: Ø 25 – 114 mm

4019-4: Ø 25 – 114 mm

Threaded rods M10:18 Nm or 26Nm

Bolts M10: 41 Nm

Rev 3

EN 10904019-4

MAFI 4019-2

MAFI 4019-3MAFI 4019-4

4019-3

4019-2



Designed to provide a secure mounting solution for two, three or four Ericsson RRUs, with or without PSU.The double RRU mount, 4019-2, can also accomodatea confi guration with two A2 units.

FlexibilityThe 4019-3 and 4019-4 will fi t any round member fromØ 25 – 114 mm, or any equal-angle or square-sectionmember from 40 × 40 – 80 × 80 mm.The 4019-2 will fi t any round member from Ø 40 – 114 mm,or any square-section member from 40 × 40 – 80 × 80 mm.



4019-2 or E-order number (SEG): 60006844019-3 or E-order number (SEG): 60006854019-4 or E-order number (SEG): 6000686


MAFI 4019-3

MAFI 4019-2

MAFI 4019-4

× 2Content of kit

Rev 3

MAFI 4019-*RRU-MountFamily

58

MAFI 4036Single RRUs Support—Designed to provide a secure mounting solution for one Ericsson RRU, or two RRUs with the optional Dual RRUs support expansion, with or without PSU or A2/A3.




Load resistanceMax equipment weight: 35 kg per equipment fi ttinginstance (Fmass ≈ 345 N).

An ultimate transient man-load of 2400 N is also accepted.

Fmass

FmassFmass

Fmass

Rev 3

59

MAFI 4036Single RRUs Support—Designed to provide a secure mounting solution for one Ericsson RRU, or two RRUs with the optional Dual RRUs support expansion, with or without PSU or A2/A3.




Load resistanceMax equipment weight: 35 kg per equipment fi ttinginstance (Fmass ≈ 345 N).

An ultimate transient man-load of 2400 N is also accepted.

Fmass

FmassFmass

Fmass

Rev 3

60

Product optionsMAFI 4037, Dual RRUs Support expansion kit.

Part list

Parts MaterialQuantity4036

Quantity4037

Clamps S355MC FZV 4 -

Arms S355MC FZV 2 2

Bushings S355 FZV 6 6

Threaded rods M10 8.8 FZV 4 -

Bolts M10 8.8 FZV, A4 10 10

Nuts M10 8.8 FZV 28 8


4036 405 105 100 5.7

4037 395 105 60 1.9

Tightening torque

Equipment weight


Parent pole/leg



Ericsson RRUs and other units with horizontal c/c distance of 146 mm (5 ¾”)

35 × 35 mmup to 80 × 80 mm

35 × 35 mmup to 80 × 80 mm

Ø 35 – 114 mm


Bolts with bushings M10: 48 Nm

Flange bolts M10: 41 Nm

Maximum: 40 kg

Rev 1



Designed to provide a secure mounting solution for oneEricsson RRU, or two RRUs with the optional Dual RRUs support expansion, with or without PSU or A2/A3.

FlexibilityThe support can be used on a range of pole diameters withor without a PSU or A2/A3 attached to the backside of the RRU. It can also be mounted on angle irons as well as box sectional beams. The support is manufactured of high quality steel with hot dip galvanization treatment.






MAFI 4037 Option

Rev 1

MAFI 4036*Single RRUs Support

61

Product optionsMAFI 4037, Dual RRUs Support expansion kit.

Part list


Quantity4037

Clamps S355MC FZV 4 -

Arms S355MC FZV 2 2

Bushings S355 FZV 6 6

Threaded rods M10 8.8 FZV 4 -

Bolts M10 8.8 FZV, A4 10 10

Nuts M10 8.8 FZV 28 8


4036 405 105 100 5.7

4037 395 105 60 1.9

Tightening torque

Equipment weight


Parent pole/leg



Ericsson RRUs and other units with horizontal c/c distance of 146 mm (5 ¾”)

35 × 35 mmup to 80 × 80 mm

35 × 35 mmup to 80 × 80 mm

Ø 35 – 114 mm


Bolts with bushings M10: 48 Nm

Flange bolts M10: 41 Nm

Maximum: 40 kg

Rev 1



Designed to provide a secure mounting solution for oneEricsson RRU, or two RRUs with the optional Dual RRUs support expansion, with or without PSU or A2/A3.

FlexibilityThe support can be used on a range of pole diameters withor without a PSU or A2/A3 attached to the backside of the RRU. It can also be mounted on angle irons as well as box sectional beams. The support is manufactured of high quality steel with hot dip galvanization treatment.






MAFI 4037 Option

Rev 1

MAFI 4036*Single RRUs Support

MAFI 6023Multi ERSBracket—Brackets for attaching up to four Ericsson ERS equipment i.e. RRU, PSU and/or fi lters to a pole in "bookshelf"or "portrait" position.


• Allows up to four mountable units.

• Low weight.

• Easy installation.

63

MAFI 6023Multi ERSBracket—Brackets for attaching up to four Ericsson ERS equipment i.e. RRU, PSU and/or fi lters to a pole in "bookshelf"or "portrait" position.


• Allows up to four mountable units.

• Low weight.

• Easy installation.

64


Brackets HC420LA FZV 2

Bushing Nuts M10 8.8 FZV 2

Flange Bolts M10 8.8 FZV 2



6023 215 155 70 1.7

Product optionsMAFI 9748; M8 flange bolts for mounting extra radios.


×

Tightening torque

Equipment pole


Article MAFI 6023

Ø 55 – 114.3 mm

Flange Bolts M8: 22 Nm


Rev 1


Article MAFI 6023

Depending on the size of the Ericsson ERS equipment,it is possible to attach up to four ERS units (i.e RRU, PSUor fi lters) to a pole, either in bookshelf or back to back position. The individual brackets can also be used whenit is required to mount equipment to a wall. The kit is delivered with all necessary bolts and nuts for two fi tting instances.

FlexibilityThe product can be mounted either as a pairto a pole from Ø 55 – 114 mm or as singles directlybolted to a suitable wall.





Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check that the supporting structure can safely carry the loads applied toit by the MAFI product.

Vertical loadMax supported equipment mass (Fmass) = 80 kg total(40 kg per bracket).

Content of kit

Rev 1

MAFI 6023Multi ERSBracket

65


Brackets HC420LA FZV 2

Bushing Nuts M10 8.8 FZV 2




6023 215 155 70 1.7

Product optionsMAFI 9748; M8 flange bolts for mounting extra radios.


×

Tightening torque

Equipment pole


Article MAFI 6023

Ø 55 – 114.3 mm



Rev 1


Article MAFI 6023

Depending on the size of the Ericsson ERS equipment,it is possible to attach up to four ERS units (i.e RRU, PSUor fi lters) to a pole, either in bookshelf or back to back position. The individual brackets can also be used whenit is required to mount equipment to a wall. The kit is delivered with all necessary bolts and nuts for two fi tting instances.

FlexibilityThe product can be mounted either as a pairto a pole from Ø 55 – 114 mm or as singles directlybolted to a suitable wall.





Design resistance dataThe load limits given in this data sheet apply to the MAFI product only. The designer should always check that the supporting structure can safely carry the loads applied toit by the MAFI product.

Vertical loadMax supported equipment mass (Fmass) = 80 kg total(40 kg per bracket).

Content of kit

Rev 1

MAFI 6023Multi ERSBracket

MAFI 5110RRUSupport—Designed for attaching RRU's to existing cable trays.


• Flat and lightweight package.

• Suitable for most cable trays.

67

MAFI 5110RRUSupport—Designed for attaching RRU's to existing cable trays.


• Flat and lightweight package.

• Suitable for most cable trays.

68


Support brackets DX51D Z350 2

Self-tapping screws 8.8 Fe/ZnNi8P4 8

Bolts M10 A4 4

Washers FZV 4


5110 540 345 20 3.3

Product optionsMAFI 91103 ; Adaptor plate for Nokia RRH.

Parent structure


Article MAFI 5110

Width of cable tray:200 – 500 mm

Rev 3


Article MAFI 5110

Designed for attaching RRU's to existing cable trays.

FlexibilityThe support is delivered as a flat pack and can easilybe mounted on cable trays of width 200 – 500 mm.Self-tapping screws are included.

QualityThe support is manufactured from high quality steelwith hot dipped galvanization.





× 2Content of kit

Rev 3

MAFI 5110RRUSupport

69


Support brackets DX51D Z350 2

Self-tapping screws 8.8 Fe/ZnNi8P4 8

Bolts M10 A4 4

Washers FZV 4


5110 540 345 20 3.3

Product optionsMAFI 91103 ; Adaptor plate for Nokia RRH.

Parent structure


Article MAFI 5110

Width of cable tray:200 – 500 mm

Rev 3


Article MAFI 5110

Designed for attaching RRU's to existing cable trays.

FlexibilityThe support is delivered as a flat pack and can easilybe mounted on cable trays of width 200 – 500 mm.Self-tapping screws are included.

QualityThe support is manufactured from high quality steelwith hot dipped galvanization.





× 2Content of kit

Rev 3

MAFI 5110RRUSupport

MAFI 1234RRU Adaptor Plate—To be used when modernizing or expandingcapacity on existing footprint. The plate allowsyou to mount one face mounted or two bookshelf mounted Ericsson RRU's. The plate also allow forPSU mounting behind the RRU’s.


• Saves installation time.

• Support to modernizing old equipment.

71

MAFI 1234RRU Adaptor Plate—To be used when modernizing or expandingcapacity on existing footprint. The plate allowsyou to mount one face mounted or two bookshelf mounted Ericsson RRU's. The plate also allow forPSU mounting behind the RRU’s.


• Saves installation time.

• Support to modernizing old equipment.

72


Adaptor Plate S355MC FZV 1

Bolts M8 8.8 FZV 8

Washers M8 8.8 FZV 8

Bolts M10 8.8 FZV 4


Nuts M10 8.8 FZV 8

Locking Nuts M4 8.8 FZV 4



1234 300 300 30 2.4

Tightening torque

Mountable products


Article MAFI 1234 Rev 1

MAFI 4010, 4015, 4020and 4019 family or onsimilar brackets withthe same footprint.

Bolt M8: 22 Nm

Bolt M10: 40 Nm


Article MAFI 1234Rev 1

To be used when modernizing or expanding capacity on existing footprint. The plate allows you to mount one face mounted or two bookshelf mounted Ericsson RRU’s.The plate also allow for PSU mounting behind the RRU’s.

FlexibilityThe adaptor plate can be mounted on MAFI products:4010, 4015, 4020 and the 4019-family. Or on similar brackets with same footprint.






Vertical loadMax supported equipment mass (Fmass) = 35 kg

MAFI 1234RRU Adaptor Plate

Content of kit

73


Adaptor Plate S355MC FZV 1

Bolts M8 8.8 FZV 8


Bolts M10 8.8 FZV 4


Nuts M10 8.8 FZV 8

Locking Nuts M4 8.8 FZV 4



1234 300 300 30 2.4

Tightening torque

Mountable products


Article MAFI 1234 Rev 1

MAFI 4010, 4015, 4020and 4019 family or onsimilar brackets withthe same footprint.

Bolt M8: 22 Nm

Bolt M10: 40 Nm


Article MAFI 1234Rev 1

To be used when modernizing or expanding capacity on existing footprint. The plate allows you to mount one face mounted or two bookshelf mounted Ericsson RRU’s.The plate also allow for PSU mounting behind the RRU’s.

FlexibilityThe adaptor plate can be mounted on MAFI products:4010, 4015, 4020 and the 4019-family. Or on similar brackets with same footprint.






Vertical loadMax supported equipment mass (Fmass) = 35 kg

MAFI 1234RRU Adaptor Plate

Content of kit

MAFI 3115Antenna Offset—Designed to allow for an RRU to be mounted behinda panel antenna without any extra equipment pole.


• Antenna offset without poles.

• Saves weight and wind load.

75

MAFI 3115Antenna Offset—Designed to allow for an RRU to be mounted behinda panel antenna without any extra equipment pole.


• Antenna offset without poles.

• Saves weight and wind load.

76


Offset plates S355MC FZV 2

Clamps S355MC FZV 2

U-bolts A4 or 8.8 FZV 2

Nuts and washers 8.8 FZV and A4 12


3115 250 150 100 4

Product optionsMAFI 31154; Antenna adapter kit.

Rev 4

Tightening torque

Parent pole/leg



Ø 25 – 76.1 mm

U-bolt M12: 31 Nm

MAFI 3115

Option: MAFI 31154

EN 1090

Rev 4



Designed to allow for an RRU to be mounted behind a panel antenna without any extra equipment pole.

FlexibilityThe offset bracket can handle a wide range of towerand mast leg sections. The bracket fi ts either directlyagainst the antenna or tilt brackets if used.The optional 31154 antenna adapter kit allows mountingof antennas with 150 mm c/c fi xings in the vertical plane.





MAFI 3115*AntennaOffset


MAFI 3115 with option 31154, antenna adapter kit

77


Offset plates S355MC FZV 2

Clamps S355MC FZV 2

U-bolts A4 or 8.8 FZV 2

Nuts and washers 8.8 FZV and A4 12


3115 250 150 100 4

Product optionsMAFI 31154; Antenna adapter kit.

Rev 4

Tightening torque

Parent pole/leg



Ø 25 – 76.1 mm

U-bolt M12: 31 Nm

MAFI 3115

Option: MAFI 31154

EN 1090

Rev 4



Designed to allow for an RRU to be mounted behind a panel antenna without any extra equipment pole.

FlexibilityThe offset bracket can handle a wide range of towerand mast leg sections. The bracket fi ts either directlyagainst the antenna or tilt brackets if used.The optional 31154 antenna adapter kit allows mountingof antennas with 150 mm c/c fi xings in the vertical plane.





MAFI 3115*AntennaOffset


MAFI 3115 with option 31154, antenna adapter kit

78



42.3 152

48.3 178

60.3 230

76.1 298

Rev 4




Vertical loadMax Supported Equipment mass = 50 kg



Mresisting

Fwind

MAFI 4112Free Stander Light—Designed as a free standing equipment polefor low wind-load generating equipment such as RRUs placed in areas of low risk. The 4112 is assembledon site allowing it to be carried by one man alone in components weighing less than 25 kg.


• Small footprint.

• Everything in the box, including concrete blocks.

79



42.3 152

48.3 178

60.3 230

76.1 298

Rev 4







Mresisting

Fwind

MAFI 4112Free Stander Light—Designed as a free standing equipment polefor low wind-load generating equipment such as RRUs placed in areas of low risk. The 4112 is assembledon site allowing it to be carried by one man alone in components weighing less than 25 kg.


• Small footprint.

• Everything in the box, including concrete blocks.

80


Steel plates S355MC FZV -

Nuts 8.8 FZV 19

Threaded rods 8.8 FZV 3

Ballast weight Concrete 3 × 20 kg

Screws M12 8.8 FZV 2

Protective mat 1

Tube P235TR1 FZV 1


4112 1200 800 340 122

Tightening torque

Equipment pole


Article MAFI 4112

Ø 60.3 mm


Grub screws: 10 Nm

Rev 2


Article MAFI 4112

Designed as a free standing equipment pole for lowwind-load generating equipment such as RRUs placedin areas of low risk. The 4112 is assembled on siteallowing it to be carried by one man alone in components weighing less than 25 kg.

FlexibilityThe pole on the free stander light is tiltable up to 6°,so that the pole will always be vertical.





Content of kit

Rev 2

MAFI 4112Free Stander Light

81


Steel plates S355MC FZV -

Nuts 8.8 FZV 19

Threaded rods 8.8 FZV 3

Ballast weight Concrete 3 × 20 kg

Screws M12 8.8 FZV 2

Protective mat 1

Tube P235TR1 FZV 1


4112 1200 800 340 122

Tightening torque

Equipment pole


Article MAFI 4112

Ø 60.3 mm


Grub screws: 10 Nm

Rev 2


Article MAFI 4112

Designed as a free standing equipment pole for lowwind-load generating equipment such as RRUs placedin areas of low risk. The 4112 is assembled on siteallowing it to be carried by one man alone in components weighing less than 25 kg.

FlexibilityThe pole on the free stander light is tiltable up to 6°,so that the pole will always be vertical.





Content of kit

Rev 2

MAFI 4112Free Stander Light

82

MAFI 4309Free StanderMedium—Designed to carry antennas and other equipment on places where a free standing structure is suitable.


• Optimized for small antennas of 3000 mm.

• All in one box.

Overturning moment table

Confi gurationOverturning moment MO (Nm)

3 concrete blocks of each 20 kg 265


Article MAFI 4112


Overturning momentFor this free standing structure the critical dimensioning parameter is the ability to resist overturning moment.The fi gures in the table need to be higher than the moment applied by the ultimate wind loads acting on the pole andthe supported equipment. A stability calculation should be done in every case - if you need help, please contact MAFI.

Fwind

MO

Rev 2

83

MAFI 4309Free StanderMedium—Designed to carry antennas and other equipment on places where a free standing structure is suitable.


• Optimized for small antennas of 3000 mm.

• All in one box.


Confi gurationOverturning moment MO (Nm)

3 concrete blocks of each 20 kg 265


Article MAFI 4112


Overturning momentFor this free standing structure the critical dimensioning parameter is the ability to resist overturning moment.The fi gures in the table need to be higher than the moment applied by the ultimate wind loads acting on the pole andthe supported equipment. A stability calculation should be done in every case - if you need help, please contact MAFI.

Fwind

MO

Rev 2

84


Sheet steel parts S355MC FZV -

Tube P235TR1 FZV 1

Nuts and bolts 8.8 FZV -

Threaded rods 8.8 FZV -

Protective mat 1

Product optionsArt. no. Description

43090 Extra ballast pocketsCorner pockets to increase base width and weight.

42071 Ballast: Concrete blocks500 × 500 × 50 mm Weight 25 kg/pcs.


4309 1200 800 400 111

×

Ballast blocks

Tightening torque

Equipment pole


Article MAFI 4309

View mounting instructions.

76.1 × 2.9 mm

2 × 4 pcs of500 × 500 × 50 mm concrete blocks, each 25 kg (only included for UK market).

The structure can beplaced on surfaces thathave a slope of up to 6°from the horizontal plane.The equipment pole canbe tilted to alwaysstand vertical.

Tilting

Rev 5

EN 1090


Article MAFI 4309

Designed to carry antennas and other equipment on places where a free standing structure is suitable.

FlexibilityThe ballast in the structure can be varied to suit the windload and there’s a lot of space for mounting equipment.The equipment pole is tiltable up to 6° to so that the polecan be kept vertical.





Option: 43090,extra ballast pockets for 4309

Rev 5

MAFI 4309Free StanderMedium

85



Tube P235TR1 FZV 1

Nuts and bolts 8.8 FZV -

Threaded rods 8.8 FZV -

Protective mat 1

Product optionsArt. no. Description

43090 Extra ballast pocketsCorner pockets to increase base width and weight.

42071 Ballast: Concrete blocks500 × 500 × 50 mm Weight 25 kg/pcs.


4309 1200 800 400 111

×

Ballast blocks

Tightening torque

Equipment pole


Article MAFI 4309


76.1 × 2.9 mm

2 × 4 pcs of500 × 500 × 50 mm concrete blocks, each 25 kg (only included for UK market).

The structure can beplaced on surfaces thathave a slope of up to 6°from the horizontal plane.The equipment pole canbe tilted to alwaysstand vertical.

Tilting

Rev 5

EN 1090


Article MAFI 4309

Designed to carry antennas and other equipment on places where a free standing structure is suitable.

FlexibilityThe ballast in the structure can be varied to suit the windload and there’s a lot of space for mounting equipment.The equipment pole is tiltable up to 6° to so that the polecan be kept vertical.





Option: 43090,extra ballast pockets for 4309

Rev 5

MAFI 4309Free StanderMedium

86

MAFI 4600*Freestanding Corner Mount—Designed to provide mounting opportunityfor antennas and other equipment on locationswhere freestanding solutions are needed.


• Several different sizes depending on the roofand antenna load.

• Suitable for different sizes of concrete blocks.


Confi gurationOverturningresistance MRd (Nm)

4 concrete blocks of each 25 kg (Half ballast).

1000

8 concrete blocks of each 25 kg(Full ballast).

1600

Extra ballast pockets 43090and 16 concrete blocks each weighing 25 kg.

3750


Article MAFI 4309


Overturning resistanceFor this free standing structure the critical dimensioning parameter is the ability to resist overturning.The fi gures in the table need to be higher than the moment applied by the ultimate wind loads acting on the pole andthe supported equipment.

The roof structure should to be checked by an engineerto confi rm that it can withstand the total weight of the structure. Also it should be confi rmed that the frictionbetween the 4309's rubber mat and the roof is enoughto prevent sliding.

Fwind

MRd

Rev 5

87

MAFI 4600*Freestanding Corner Mount—Designed to provide mounting opportunityfor antennas and other equipment on locationswhere freestanding solutions are needed.


• Several different sizes depending on the roofand antenna load.

• Suitable for different sizes of concrete blocks.


Confi gurationOverturningresistance MRd (Nm)

4 concrete blocks of each 25 kg (Half ballast).

1000

8 concrete blocks of each 25 kg(Full ballast).

1600

Extra ballast pockets 43090and 16 concrete blocks each weighing 25 kg.

3750


Article MAFI 4309


Overturning resistanceFor this free standing structure the critical dimensioning parameter is the ability to resist overturning.The fi gures in the table need to be higher than the moment applied by the ultimate wind loads acting on the pole andthe supported equipment.

The roof structure should to be checked by an engineerto confi rm that it can withstand the total weight of the structure. Also it should be confi rmed that the frictionbetween the 4309's rubber mat and the roof is enoughto prevent sliding.

Fwind

MRd

Rev 5

88



Frame side tubes S355J2H FZV 4

Nuts and bolts 8.8 FZV or equivalent -

Struts P235TR1 FZV 2

Protective mats Cell polyethylene RG 100 4

Product optionsMAFI 42071: 500 × 500 × 50 mm, 25 kg concrete block.

MAFI 91124: Additional strut for yoke arms to be attached to Ø 76.1 mm tube.



4600 1250 350 350 65

4601 1750 350 350 105

4602 2300 350 350 137

Tightening torque

Equipment pole


*Article MAFI 4600/4601/4602

Ø 76.1 mm

View mountinginstructions.

Recommended maximum tilt: 4°.

MAFI 4600: 2 rows

Lenght: 1040 mmWidth: 100 – 505 mm

MAFI 4601: 3 rows


MAFI 4602: 4 rowsLenght: 2040 mmWidth: 100 – 505 mm

Ballast block capacity

Tightening torque

Rev 3

EN 1090


*Article MAFI 4600/4601/4602

Designed to provide mounting oportunity for antennasand other equipment on locations where freestanding solutions are needed.

FlexibilityThe structure is designed to support equipment-carrying tubes using ballast as counter weight. This provides mounting oportunity without penetrating weatherproofi ng layers on rooftops. Adjustable ballast-carrying cross beams makeit possible to account for different sizes of concrete blocks depending on availabillity. The interface between the frame and the equipment pole is a cone-shaped folded steel sheet that provides a three point contact even when tilting so that the pole can be kept vertical if the surface is sloping.





Content of kit

MAFI 4602 MAFI 4600

MAFI 91124Optional

MAFI 4601

Rev 3

MAFI 4600*Freestanding Corner Mount

89



Frame side tubes S355J2H FZV 4



Protective mats Cell polyethylene RG 100 4

Product optionsMAFI 42071: 500 × 500 × 50 mm, 25 kg concrete block.

MAFI 91124: Additional strut for yoke arms to be attached to Ø 76.1 mm tube.



4600 1250 350 350 65

4601 1750 350 350 105

4602 2300 350 350 137

Tightening torque

Equipment pole


*Article MAFI 4600/4601/4602

Ø 76.1 mm

View mountinginstructions.

Recommended maximum tilt: 4°.

MAFI 4600: 2 rows


MAFI 4601: 3 rows


MAFI 4602: 4 rowsLenght: 2040 mmWidth: 100 – 505 mm

Ballast block capacity

Tightening torque

Rev 3

EN 1090


*Article MAFI 4600/4601/4602

Designed to provide mounting oportunity for antennasand other equipment on locations where freestanding solutions are needed.

FlexibilityThe structure is designed to support equipment-carrying tubes using ballast as counter weight. This provides mounting oportunity without penetrating weatherproofi ng layers on rooftops. Adjustable ballast-carrying cross beams makeit possible to account for different sizes of concrete blocks depending on availabillity. The interface between the frame and the equipment pole is a cone-shaped folded steel sheet that provides a three point contact even when tilting so that the pole can be kept vertical if the surface is sloping.





Content of kit

MAFI 4602 MAFI 4600

MAFI 91124Optional

MAFI 4601

Rev 3

MAFI 4600*Freestanding Corner Mount

90

MAFI 91110ExtraPole Kit—Designed to provide mounting opportunityfor an extra pole on the freestanding cornermounts MAFI 4601 and 4602.


Product Ballast onfi gurationOverturningresistance MR (Nm)

4600 Max ballast 224 kg 1410




*Article MAFI 4600/4601/4602


Overturning resistanceFor this family of freestanding structures the critical dimensioning parameter is the ability to resist overturning.The fi gures in the overturning moment table need to be higher than the moment applied by the design wind loads(i.e ultimate load including load factors) acting on the poleand the supported equipment.

The roof structure should be checked by an engineer to confi rm that it can withstand the total weight of the structure. Also it should be confi rmed that the friction between the product´s rubber mat and the roof is enough to prevent sliding.

For custom calculations regarding design resistancefor overturning, use the formula and the table below.The maximum allowed ballast and overturning resistanceis not to be exceeded.

*Article MAFI 4600/4601/4602

Product Lever arm (m)Productweight (kg)

Max overturning resistance (Nm)

4600 0.58 48.5 1410

4601 0.83 74.0 4260

4602 1.10 107.5 9790

Rev 3

91

MAFI 91110ExtraPole Kit—Designed to provide mounting opportunityfor an extra pole on the freestanding cornermounts MAFI 4601 and 4602.


Product Ballast onfi gurationOverturningresistance MR (Nm)





*Article MAFI 4600/4601/4602


Overturning resistanceFor this family of freestanding structures the critical dimensioning parameter is the ability to resist overturning.The fi gures in the overturning moment table need to be higher than the moment applied by the design wind loads(i.e ultimate load including load factors) acting on the poleand the supported equipment.

The roof structure should be checked by an engineer to confi rm that it can withstand the total weight of the structure. Also it should be confi rmed that the friction between the product´s rubber mat and the roof is enough to prevent sliding.

For custom calculations regarding design resistancefor overturning, use the formula and the table below.The maximum allowed ballast and overturning resistanceis not to be exceeded.

*Article MAFI 4600/4601/4602

Product Lever arm (m)Productweight (kg)

Max overturning resistance (Nm)

4600 0.58 48.5 1410

4601 0.83 74.0 4260

4602 1.10 107.5 9790

Rev 3

92



Frame pole foot S355J2H FZV 1



91110 2300 300 200 22

Tightening torque

Equipment pole


Article MAFI 91110

Ø 76.1 mm


Rev 1

EN 1090


Article MAFI 91110

Designed to provide mounting opportunity for an extra pole on the freestanding corner mounts MAFI 4601 and 4602.

FlexibilityKit for mounting an extra 76.1 mm tube to MAFI 4601 or 4602. The recommended length of the tube is max 1.5 m.Easily mounted when assembling the freestanders corner mounts or added onto already built structures.



91110


Design resistance dataOverturning ResistanceAll restistance data accoring to the platform,MAFI 4601 or MAFI 4602, the extra pole kit is to be mounted on.

Content of kit

MAFI 91110 mounted on 4601


Rev 1

MAFI 91110ExtraPole Kit

93



Frame pole foot S355J2H FZV 1



91110 2300 300 200 22

Tightening torque

Equipment pole


Article MAFI 91110

Ø 76.1 mm


Rev 1

EN 1090


Article MAFI 91110

Designed to provide mounting opportunity for an extra pole on the freestanding corner mounts MAFI 4601 and 4602.

FlexibilityKit for mounting an extra 76.1 mm tube to MAFI 4601 or 4602. The recommended length of the tube is max 1.5 m.Easily mounted when assembling the freestanders corner mounts or added onto already built structures.



91110


Design resistance dataOverturning ResistanceAll restistance data accoring to the platform,MAFI 4601 or MAFI 4602, the extra pole kit is to be mounted on.

Content of kit



Rev 1

MAFI 91110ExtraPole Kit

MAFI 8050Adjustable Cabinet Platform—Lightweight platform designed to provide a level basefor small and medium-sized cabinets.


• Flexible hole pattern fi ts most cabinets.

• All in one box.

95

MAFI 8050Adjustable Cabinet Platform—Lightweight platform designed to provide a level basefor small and medium-sized cabinets.


• Flexible hole pattern fi ts most cabinets.

• All in one box.

96

Part list


Quantity8051

Steel beams, long S355MC FZV 2 2

Steel beams, short S355MC FZV 4 4

Ball-jointed feet Plastic and A2 4 4

Leg offsets S355MC FZV 0 4

Protective mats 4 4

Nuts, bolts and washers 8.8 FZV - -


8050 1400 800 350 55

8051 1400 800 350 60

Product optionsMAFI 91100: Outriggers, 1500 mm.

MAFI 91101: Outriggers, 2000 mm.

Cabinet bolt dimension

Ground/Roof slope

Equipment weight

Tightening torque

Maximum: 600 kg

Bolt M12: 80 Nm



Maximum M12

Maximum: 6°

Rev 1



Lightweight platform designed to provide a level basefor small and medium-sized cabinets.

FlexibilityBecause of the elongated holes and slidable cross beamsyou can create the hole pattern you need for any cabinet.The frame can be placed on either the supplied ball-jointed feet, or directly on the roof/ground.

Using the ball-jointed feet allows you to compensatefor a maximum roof slope of 6°. Outriggers can also be specifi ed in lengths of 1500 mm or 2000 m(called MAFI 91100 and MAFI 91101 respectively).





MAFI 8051

MAFI 8050

Rev 1

MAFI 8050*Adjustable Cabinet Platform

97

Part list


Quantity8051

Steel beams, long S355MC FZV 2 2

Steel beams, short S355MC FZV 4 4

Ball-jointed feet Plastic and A2 4 4

Leg offsets S355MC FZV 0 4

Protective mats 4 4

Nuts, bolts and washers 8.8 FZV - -


8050 1400 800 350 55

8051 1400 800 350 60

Product optionsMAFI 91100: Outriggers, 1500 mm.

MAFI 91101: Outriggers, 2000 mm.

Cabinet bolt dimension

Ground/Roof slope

Equipment weight

Tightening torque

Maximum: 600 kg

Bolt M12: 80 Nm



Maximum M12

Maximum: 6°

Rev 1



Lightweight platform designed to provide a level basefor small and medium-sized cabinets.

FlexibilityBecause of the elongated holes and slidable cross beamsyou can create the hole pattern you need for any cabinet.The frame can be placed on either the supplied ball-jointed feet, or directly on the roof/ground.

Using the ball-jointed feet allows you to compensatefor a maximum roof slope of 6°. Outriggers can also be specifi ed in lengths of 1500 mm or 2000 m(called MAFI 91100 and MAFI 91101 respectively).





MAFI 8051

MAFI 8050

Rev 1

MAFI 8050*Adjustable Cabinet Platform

9896




Overturning momentWhen designing a platform, you need to ensure that the frame is wide enough to provide stability against overturning.

You need to know the wind forces at the site location andthe dimensions and weight of the cabinets.

A stability calculation should be done in every case– if you need help, please contact MAFI.

Rev 1

Fwind

Mresisting

MAFI 3541Medium Duty Wall Mount—Designed for mounting an equipment pole on a wall.The kit is dimensioned to carry medium-weight tubesand equipment mounted between the wall brackets.The kit consists of a pair of brackets with allnecessary U-bolts.


• Small wall bracket with the equipment near the wall.

• Few parts and easy assemble.

9996




Overturning momentWhen designing a platform, you need to ensure that the frame is wide enough to provide stability against overturning.

You need to know the wind forces at the site location andthe dimensions and weight of the cabinets.

A stability calculation should be done in every case– if you need help, please contact MAFI.

Rev 1

Fwind

Mresisting

MAFI 3541Medium Duty Wall Mount—Designed for mounting an equipment pole on a wall.The kit is dimensioned to carry medium-weight tubesand equipment mounted between the wall brackets.The kit consists of a pair of brackets with allnecessary U-bolts.


• Small wall bracket with the equipment near the wall.


100


Wall brackets S355MC FZV 2


Nuts M12 8.8 FZV 16

Washers 8.8 FZV 12


3541 385 300 90 4.9


Tightening torque

Equipment pole


Article MAFI 3541

Ø 60 – 114.3 mm

U-bolts: 15 Nm

Rev 3

EN 1090


Article MAFI 3541

Designed for mounting an equipment pole on a wall.The kit is dimensioned to carry medium-weight tubesand equipment mounted between the wall brackets.The kit consists of a pair of brackets withall necessary U-bolts.

FlexibilityThe product can be mounted either directly to brickor concrete walls, or using through-mounts with back plates. Equipment poles can range from Ø 60 – 114 mm.





Content of kit

Rev 3

MAFI 3541MediumDuty Wall Mount

101




Nuts M12 8.8 FZV 16

Washers 8.8 FZV 12


3541 385 300 90 4.9


Tightening torque

Equipment pole


Article MAFI 3541

Ø 60 – 114.3 mm

U-bolts: 15 Nm

Rev 3

EN 1090


Article MAFI 3541

Designed for mounting an equipment pole on a wall.The kit is dimensioned to carry medium-weight tubesand equipment mounted between the wall brackets.The kit consists of a pair of brackets withall necessary U-bolts.

FlexibilityThe product can be mounted either directly to brickor concrete walls, or using through-mounts with back plates. Equipment poles can range from Ø 60 – 114 mm.





Content of kit

Rev 3

MAFI 3541MediumDuty Wall Mount

102

MAFI 2414Heavy Duty Wall Mount—Designed to provide a pole mount on a wall.The product is dimensioned to carry heavy polesand equipment.


• For heavy duty wall installations.



60.3 115

76.1 159

88.9 176

101.6 204

114.3 231


Article MAFI 3541



Reaction force Ultimate lateral reaction force (Flat) : 1200 N per bracket

Rotational slip resistanceWhen high side forces can be expected, use the table belowto check for rotational slip when mounting on a circular pole. Use ultimate loads to calculate the applied torque.

Fmass

Flat

Mresisting

Rev 3

103

MAFI 2414Heavy Duty Wall Mount—Designed to provide a pole mount on a wall.The product is dimensioned to carry heavy polesand equipment.


• For heavy duty wall installations.



60.3 115

76.1 159

88.9 176

101.6 204

114.3 231


Article MAFI 3541





Fmass

Flat

Mresisting

Rev 3

104


Cantilevers S355MC FZV 2

Support plates S355MC FZV 8

Bushings S355JR FZV 4

U-bolts, M12 8.8 FZV 4

Bolts M16 8.8 FZV 4

Nuts M16, M12 8.8 FZV 24


2414 385 295 200 17


Tightening torque

Equipment pole

Mounting structure


Article MAFI 2414

Ø 101.6 and 114.3 mm

Brick and concrete walls.

U-bolts M12: 31 Nm

Bolts M16: 150 Nm

Rev 3

EN 1090


Article MAFI 2414

Designed to provide a pole mount on a wall.The product is dimensioned to carry heavy polesand equipment.

FlexibilityThe product can be mounted either directly boltedto brick or concrete walls or using through-mountswith reinforcement on the back.





Content of kit

Rev 3

MAFI 2414HeavyDuty Wall Mount

105


Cantilevers S355MC FZV 2

Support plates S355MC FZV 8

Bushings S355JR FZV 4

U-bolts, M12 8.8 FZV 4

Bolts M16 8.8 FZV 4

Nuts M16, M12 8.8 FZV 24


2414 385 295 200 17


Tightening torque

Equipment pole

Mounting structure


Article MAFI 2414

Ø 101.6 and 114.3 mm

Brick and concrete walls.

U-bolts M12: 31 Nm

Bolts M16: 150 Nm

Rev 3

EN 1090


Article MAFI 2414

Designed to provide a pole mount on a wall.The product is dimensioned to carry heavy polesand equipment.

FlexibilityThe product can be mounted either directly boltedto brick or concrete walls or using through-mountswith reinforcement on the back.





Content of kit

Rev 3

MAFI 2414HeavyDuty Wall Mount

106

MAFI 3544Large Offset Wall Mount—Designed for mounting an equipment pole on a wall when a large clearance is required. The product is dimensioned to carry medium-weight tubes and equipment mounted between the wall brackets. The kit consists of a pair of brackets with all necessary U-bolts.


• Small wall bracket with the equipmentdistanced from the wall.


Ultimate Torque Capacity per Cantilever


101.6 816

114.3 924


Article MAFI 2414


Vertical loadConfi guration 1: Max supported equipment mass (Fmass) = 500 kg Ultimate Transient Man-Load = 2400 NConfi guration 2:Max supported equipment mass (Fmass) = 240 kgUltimate FRd (reaction force to Fwind)= 12000 NUltimate Transient Man-Load = 2400 N

Rotational slip resistanceIn some cases the equipment pole can suffer torque loading; in these cases it is important to verify that the pole will not slip. To check this, the data from the torque resistance table canbe used. The table opposite gives the ultimate torque capacity per cantilever for different pole diameters.

Mresisting

Fmass

Fwind

FRd

Confi guration 2

Confi guration 1

Fmass

Rev 3

107

MAFI 3544Large Offset Wall Mount—Designed for mounting an equipment pole on a wall when a large clearance is required. The product is dimensioned to carry medium-weight tubes and equipment mounted between the wall brackets. The kit consists of a pair of brackets with all necessary U-bolts.


• Small wall bracket with the equipmentdistanced from the wall.


Ultimate Torque Capacity per Cantilever


101.6 816

114.3 924


Article MAFI 2414


Vertical loadConfi guration 1: Max supported equipment mass (Fmass) = 500 kg Ultimate Transient Man-Load = 2400 NConfi guration 2:Max supported equipment mass (Fmass) = 240 kgUltimate FRd (reaction force to Fwind)= 12000 NUltimate Transient Man-Load = 2400 N

Rotational slip resistanceIn some cases the equipment pole can suffer torque loading; in these cases it is important to verify that the pole will not slip. To check this, the data from the torque resistance table canbe used. The table opposite gives the ultimate torque capacity per cantilever for different pole diameters.

Mresisting

Fmass

Fwind

FRd

Confi guration 2

Confi guration 1

Fmass

Rev 3

108



U-bolt M12 A4 or 8.8 FZV 4

Nuts M12 8.8 FZV 16

Washers 8.8 FZV 12


3544 590 450 150 13.8


Tightening torque

Equipment pole


Article MAFI 3544

Ø 60 – 114.3 mm

U-bolts: 23 Nm

Rev 2

EN 1090


Article MAFI 3544

Designed for mounting an equipment pole on a wall whena large clearance is required. The product is dimensionedto carry medium-weight tubes and equipment mounted between the wall brackets. The kit consists of a pairof brackets with all necessary U-bolts.

FlexibilityThe product can be mounted either directly to brick or concrete walls, or using through-mounts with back plates.Equipment poles can range from Ø 60 – 114 mm.





Rev 2

MAFI 3544LargeOffset WallMount

Content of kit

109



U-bolt M12 A4 or 8.8 FZV 4

Nuts M12 8.8 FZV 16

Washers 8.8 FZV 12


3544 590 450 150 13.8


Tightening torque

Equipment pole


Article MAFI 3544

Ø 60 – 114.3 mm

U-bolts: 23 Nm

Rev 2

EN 1090


Article MAFI 3544

Designed for mounting an equipment pole on a wall whena large clearance is required. The product is dimensionedto carry medium-weight tubes and equipment mounted between the wall brackets. The kit consists of a pairof brackets with all necessary U-bolts.

FlexibilityThe product can be mounted either directly to brick or concrete walls, or using through-mounts with back plates.Equipment poles can range from Ø 60 – 114 mm.





Rev 2

MAFI 3544LargeOffset WallMount

Content of kit

110

MAFI 43692CornerWall Mount—Designed to provide a pole mount at the corner of a wall with a clearance of 50 mm. The product is dimensioned to carry medium-weight tubes and equipment mounted between the wall brackets. The kit consists of a pair of brackets with all necessary U-bolts.


• Corner wall bracket.

• Offset a pole from the corner of a wall.



60.3 172

76.1 223

88.9 264

101.6 306

114.3 346


Article MAFI 3544






Rev 2

Mresisting

Fmass

Flat

111

MAFI 43692CornerWall Mount—Designed to provide a pole mount at the corner of a wall with a clearance of 50 mm. The product is dimensioned to carry medium-weight tubes and equipment mounted between the wall brackets. The kit consists of a pair of brackets with all necessary U-bolts.


• Corner wall bracket.

• Offset a pole from the corner of a wall.



60.3 172

76.1 223

88.9 264

101.6 306

114.3 346


Article MAFI 3544






Rev 2

Mresisting

Fmass

Flat

112




Nuts M12 8.8 FZV 16

Washers 8.8 FZV 8


43692 800 600 340 12.5


Tightening torque

Equipment pole


Article MAFI 43692

Ø 60 – 114.3 mm

U-bolts M12: 31 Nm

Rev 3

EN 1090

Content of kit


Article MAFI 43692

Designed to provide a pole mount at the corner of a wall with a clearance of 50 mm. The product is dimensioned to carry medium-weight tubes and equipment mounted betweenthe wall brackets. The kit consists of a pair of bracketswith all necessary U-bolts.

FlexibilityThe product can be mounted either directly to brick or concrete walls, or using though-mounts with back plates.Equipment poles can range from Ø 60 – Ø 114 mm.





Rev 3

MAFI 43692Corner Wall Mount

113




Nuts M12 8.8 FZV 16

Washers 8.8 FZV 8


43692 800 600 340 12.5


Tightening torque

Equipment pole


Article MAFI 43692

Ø 60 – 114.3 mm

U-bolts M12: 31 Nm

Rev 3

EN 1090

Content of kit


Article MAFI 43692

Designed to provide a pole mount at the corner of a wall with a clearance of 50 mm. The product is dimensioned to carry medium-weight tubes and equipment mounted betweenthe wall brackets. The kit consists of a pair of bracketswith all necessary U-bolts.

FlexibilityThe product can be mounted either directly to brick or concrete walls, or using though-mounts with back plates.Equipment poles can range from Ø 60 – Ø 114 mm.





Rev 3

MAFI 43692Corner Wall Mount

114

MAFI 7000Stainless Steel 10-hole Earthbar—Designed to be used as an earthbar for towersand feeder runs.



60.3 230

76.1 298

88.9 353

101.6 408

114.3 462


Article MAFI 43692






Flat

Fmass

Mresisting

Rev 3

115

MAFI 7000Stainless Steel 10-hole Earthbar—Designed to be used as an earthbar for towersand feeder runs.



60.3 230

76.1 298

88.9 353

101.6 408

114.3 462


Article MAFI 43692






Flat

Fmass

Mresisting

Rev 3

116 Rev 2


Article MAFI 7000

Designed to be used as an earthbar for towersand feeder runs.

FlexibilityThe earthbar can easily be fi tted to round members fromØ 42 – 76 mm or angle members up to 50 × 50 mm.It can also be readily attached to cable ladder,cable tray and C-channel members.





MAFI 7000Stainless Steel 10-hole Earthbar


Plate A2 1

U-bolt A4 1

Bolts M8, M6 A2 12

Nuts M8 A2 10

Washers M8, M6 A2 34


7000 390 370 50 0.5

Rev 2

Parent pole/leg


Article MAFI 7000

Ø 42 – 76 mm

Rail ancor:Inner dimension: < 49 mm

117Rev 2


Article MAFI 7000

Designed to be used as an earthbar for towersand feeder runs.

FlexibilityThe earthbar can easily be fi tted to round members fromØ 42 – 76 mm or angle members up to 50 × 50 mm.It can also be readily attached to cable ladder,cable tray and C-channel members.





MAFI 7000Stainless Steel 10-hole Earthbar


Plate A2 1

U-bolt A4 1

Bolts M8, M6 A2 12

Nuts M8 A2 10

Washers M8, M6 A2 34


7000 390 370 50 0.5

Rev 2

Parent pole/leg


Article MAFI 7000

Ø 42 – 76 mm

Rail ancor:Inner dimension: < 49 mm

Designed as an easily-fi tted tower-leg clampto accommodate a number of feeder cables.

MAFI 32655*Cable Holder Family—

119


MAFI 32655*Cable Holder Family—

120


Article MAFI 32655/32657/32658/32660/32663/32664


FlexibilityThe different models in the family can accommodatetubular tower-legs ranging from Ø 20 – 192 mm,and angle legs from 60 × 60 – 130 × 130 mm.





MAFI 32655/57/58

MAFI 32660/63

MAFI 32664

Rev 2

MAFI 32655*Cable Holder Family

Part listParts Material Quantity*

Bracket S355MC FZV 1 (1)

Clamp S355MC FZV 0 (1)

U-bolt M12 A4 or 8.8 FZV 1 (0)

Nuts M12 8.8 FZV 4 (8)

Washers 8.8 FZV 2 (4)

*MAFI 32664: (x)


32655/57/58 400 100 50 1.2

32660/63 550 100 70 2

32664 550 100 70 2.7

Product Parent member Dim.

32655 Ø 20 – 50 mm

32657 Ø 40 – 76 mm

32658 Ø 89 – 114 mm

32660 Ø 35 – 76 mm

32663 Ø 89 – 114 mm

32664 Ø 76 – 192 mm

32664 60 × 60 – 130 × 130 mm

Tightening torque

Parent pole/leg


Article MAFI 32655/32657/32658/32660/32663/32664


U-bolts M12: 30 Nm

Rev 2

121


Article MAFI 32655/32657/32658/32660/32663/32664


FlexibilityThe different models in the family can accommodatetubular tower-legs ranging from Ø 20 – 192 mm,and angle legs from 60 × 60 – 130 × 130 mm.





MAFI 32655/57/58

MAFI 32660/63

MAFI 32664

Rev 2

MAFI 32655*Cable Holder Family

Part listParts Material Quantity*

Bracket S355MC FZV 1 (1)

Clamp S355MC FZV 0 (1)

U-bolt M12 A4 or 8.8 FZV 1 (0)

Nuts M12 8.8 FZV 4 (8)

Washers 8.8 FZV 2 (4)

*MAFI 32664: (x)


32655/57/58 400 100 50 1.2

32660/63 550 100 70 2

32664 550 100 70 2.7

Product Parent member Dim.

32655 Ø 20 – 50 mm

32657 Ø 40 – 76 mm

32658 Ø 89 – 114 mm

32660 Ø 35 – 76 mm

32663 Ø 89 – 114 mm

32664 Ø 76 – 192 mm

32664 60 × 60 – 130 × 130 mm

Tightening torque

Parent pole/leg


Article MAFI 32655/32657/32658/32660/32663/32664


U-bolts M12: 30 Nm

Rev 2

Tubes, Components & Various Accessories—

123

Tubes, Components & Various Accessories—

124

The MAFI range of tubes can be ordered in different standard lengths. The tables below contain information about material, dimensions and weight.

Order by entering article number with the appendixindicating the length.

Ex: GT60329-20GT60329-20: Galvanized Tube.GT60329-20: Outer Ø: 60.3 mm and wall thickness: 2.9 mm. GT60329-20: Length: 2000 mm.


Tubes and ComponentsRev 2

Tubes and Components

Aluminium Tubes EN AW-6082T6 nature anodized 20μmArticle no.(Square profi le)

Dimension (mm)Wall thickness(mm)

Weight(kg/m)

Article no. corresponding to available length(ex. 2000mm length corresponds to -20)

AT605-xx 60.0 5.00 2.33 -10, -15, -20, -25, -30, -60

AT755-xx 75.0 5.00 3.02 -20, -30, -60

Steel Tubes P235TR1 FZV

Article no.(Circular profi le)

Outer Ø (mm)Wall thickness(mm)

Weight(kg/m)


GT483325-xx 48.3 3.25 3.61 -033, -10, -30

GT60329-xx 60.3 2.90 4.11 -10, -15, -20, -25, -30, -60

GT76129-xx 76.1 2.90 5.24 -075, -10, -15, -20, -25, -30, -40, -60

GT76145-xx 76.1 4.50 7.96 -10, -15, -20, -30, -60

GT88932-xx 88.9 3.20 6.76 -10, -15, -20, -25, -30, -60

GT101636-xx 101.6 3.60 8.70 -10, -20, -25, -30, -60

GT114336-xx 114.3 3.60 9.83 -075, -10, -15, -20, -30, -40, -60

GT114350-xx 114.3 5.00 13.51 -10, -15, -20, -30, -40, -60

Steel Beams S355J2H FZVArticle no.(Square profi le)


Weight(kg/m)


GB50503-xx 50 × 50 3,00 4.32 -07, -10, -12, -15, -20, -30, -60

GB50505-xx 50 × 50 5.00 6.85 -30, -60

GB60603-xx 60 × 60 3.00 5.26 -10, -15, -20, -25, -30, -60

—


Tubes and Components Rev 2

U-boltsThe MAFI range of U-bolts are made of 8.8 FZV or A4 steel. They range in size and shape to fi t different member profi les. The U-bolt kits inthe table below include nuts and washers.

Order by entering the article number.

Whole Threaded RodsThe MAFI range of whole threaded rods canbe ordered in different standard materials,lengths and diameters.


Article no. TypeC - C(mm)

Ø

(metric)

Thread length (mm)

Effectivelength (mm)

3756-1 A 70 M8 45 50

3013-1 B 90 M8 95 107

2802-1 A 81 M10 85 95

3011-1 B 90 M10 70 77

33802-1 A 49 M12 60 112

3380-1 A 62 M12 55 75

33801-1 A 74 M12 60 125

2638-1 A 76 M12 75 88

33803-1 C 74 M12 60 154

2801-1 A 92 M12 91 97

33804-1 A 103 M12 110 150

2867-1 A 130 M12 102 108

3572-1 A 144 M12 100 120

2637-1 A 134 M16 60 111

4000-1 A 205 M16 165 187

Type A Type CType B

Article no. Material Length (mm) Ø (metric)

9705 A4 1000 M8

33817 FZV 8.8 200 M10

33815 FZV 8.8 250 M10

9535 A4 1000 M10

29272 FZV 8.8 100 M12

4021-2 FZV 8.8 200 M12

23121 FZV 8.8 250 M12

23131 FZV 8.8 330 M12

29191 FZV 8.8 400 M12

23651 FZV 8.8 500 M12

9438 FZV 8.8 1000 M12

9562 A4 1000 M12

27851 FZV 8.8 330 M16

27853 FZV 8.8 400 M16

29291 FZV 8.8 500 M16

9282 FZV 8.8 1000 M16

9671 A4 1000 M16

9281 FZV 8.8 2000 M16

9532 FZV 8.8 1000 M20

9664 FZV 8.8 2000 M20

125

The MAFI range of tubes can be ordered in different standard lengths. The tables below contain information about material, dimensions and weight.

Order by entering article number with the appendixindicating the length.

Ex: GT60329-20GT60329-20: Galvanized Tube.GT60329-20: Outer Ø: 60.3 mm and wall thickness: 2.9 mm. GT60329-20: Length: 2000 mm.


Tubes and ComponentsRev 2

Tubes and Components

Aluminium Tubes EN AW-6082T6 nature anodized 20μmArticle no.(Square profi le)


Weight(kg/m)


AT605-xx 60.0 5.00 2.33 -10, -15, -20, -25, -30, -60

AT755-xx 75.0 5.00 3.02 -20, -30, -60

Steel Tubes P235TR1 FZV

Article no.(Circular profi le)

Outer Ø (mm)Wall thickness(mm)

Weight(kg/m)


GT483325-xx 48.3 3.25 3.61 -033, -10, -30

GT60329-xx 60.3 2.90 4.11 -10, -15, -20, -25, -30, -60

GT76129-xx 76.1 2.90 5.24 -075, -10, -15, -20, -25, -30, -40, -60

GT76145-xx 76.1 4.50 7.96 -10, -15, -20, -30, -60

GT88932-xx 88.9 3.20 6.76 -10, -15, -20, -25, -30, -60

GT101636-xx 101.6 3.60 8.70 -10, -20, -25, -30, -60

GT114336-xx 114.3 3.60 9.83 -075, -10, -15, -20, -30, -40, -60

GT114350-xx 114.3 5.00 13.51 -10, -15, -20, -30, -40, -60

Steel Beams S355J2H FZVArticle no.(Square profi le)


Weight(kg/m)


GB50503-xx 50 × 50 3,00 4.32 -07, -10, -12, -15, -20, -30, -60

GB50505-xx 50 × 50 5.00 6.85 -30, -60

GB60603-xx 60 × 60 3.00 5.26 -10, -15, -20, -25, -30, -60

—


Tubes and Components Rev 2

U-boltsThe MAFI range of U-bolts are made of 8.8 FZV or A4 steel. They range in size and shape to fi t different member profi les. The U-bolt kits inthe table below include nuts and washers.


Whole Threaded RodsThe MAFI range of whole threaded rods canbe ordered in different standard materials,lengths and diameters.


Article no. TypeC - C(mm)

Ø

(metric)

Thread length (mm)

Effectivelength (mm)

3756-1 A 70 M8 45 50

3013-1 B 90 M8 95 107

2802-1 A 81 M10 85 95

3011-1 B 90 M10 70 77

33802-1 A 49 M12 60 112

3380-1 A 62 M12 55 75

33801-1 A 74 M12 60 125

2638-1 A 76 M12 75 88

33803-1 C 74 M12 60 154

2801-1 A 92 M12 91 97

33804-1 A 103 M12 110 150

2867-1 A 130 M12 102 108

3572-1 A 144 M12 100 120

2637-1 A 134 M16 60 111

4000-1 A 205 M16 165 187

Type A Type CType B

Article no. Material Length (mm) Ø (metric)

9705 A4 1000 M8

33817 FZV 8.8 200 M10

33815 FZV 8.8 250 M10

9535 A4 1000 M10

29272 FZV 8.8 100 M12

4021-2 FZV 8.8 200 M12

23121 FZV 8.8 250 M12

23131 FZV 8.8 330 M12

29191 FZV 8.8 400 M12

23651 FZV 8.8 500 M12

9438 FZV 8.8 1000 M12

9562 A4 1000 M12

27851 FZV 8.8 330 M16

27853 FZV 8.8 400 M16

29291 FZV 8.8 500 M16

9282 FZV 8.8 1000 M16

9671 A4 1000 M16

9281 FZV 8.8 2000 M16

9532 FZV 8.8 1000 M20

9664 FZV 8.8 2000 M20

126


Article no. Article description Height (mm) Bolts (metric)

4397 For tube Ø 114.3 mm 53 M6

43971 For tube Ø 76.1 mm 43 M6

43972 For tube Ø 88.9 mm 53 M6

Article no. Article descriptionPlatedim.(mm)

Hole dim. (mm)

4406 Fits cable ladders of width 200 mm

1000 × 200 12


1000 × 300 12


1000 × 400 12

Article no. Article descriptionLenght (mm)

Bolts (metric)

4274 Fits tube Ø76 – Ø 114 mm 1570 M10

439711 Fits top of tube Ø 76.1 mm 520 M6



Various Accessories

Top-hat Pole CoversDesigned as a waterproof cover for the top of a pole.

To order this kit, please contact MAFI quoting article number: 43971/43972/4397.


Cable Ladder Cover PlateDesigned to provide a protective cover to cable ladders or cable trays. Kit contains mounting material.

To order this kit, please contact MAFI quoting article number: 4406/44061/44062/44063.


Lightning ProtectorDesigned to protect equipment poles from lightning current

To order this kit, please contact MAFI quoting article number: 4274/439711/439720/43970.


Rev 1

Various Accessories


IndexArticle number Page Product Name

1234 71 RRU Adaptor Plate

2230 47 Strut Support

2414 103 Heavy Duty Wall Mount

3115 75 Antenna Offset

3263 7 One-direction Offset Family

3268 11 Symmetric Offset Family

3274 15 Small Universal Pole Mount

3510 43 Rafter Bracket Kit

3541 99 Medium Duty Wall Mount

3544 107 Large Offset Wall Mount

3610 19 Raking Tower Leg Offset Family

3611 23 Vertical Tower Leg Offset Family

4019 55 RRU-Mount Family

4020 51 Single RRU-Mount

4036 59 Single RRUs Support

4112 79 Free Stander Light

4309 83 Free Stander Medium

4418 39 3-sector Antenna Mounting

4600 87 Freestanding Corner Mount

5110 67 RRU Support

5310 27 Joint Plate Kit

5320 31 Crossover Kit

6023 63 Multi ERS Bracket

7000 115 Stainless Steel 10-hole Earthbar

8050 95 Adjustable Cabinet Platform

32655 119 Cable Holder Family

43249 35 Combiclamp Family

43692 111 Corner Wall Mount

91110 91 Extra Pole Kit

123 Tubes, Components & Various Accessories

MAFI ABÖrjasvägen 4 Box 275 SE-792 24 Mora, Sweden

Tel: +46 (0)250-381 60

Overall e-mail adress: [email protected] Order e-mail adress: [email protected] Personell: [email protected]

www.mafi.se

Vallen North America

2730 Edmonds Ln. Ste 100 Lewisville, TX 75067 USA

www.vallen.com

Vallen Proveedora Industrial

Av. Presidente Juarez no.2007-4 Tlalnepantla, Edo de Mex. Mexico C.P. 54070

www.vallen.com.mx

Regoort Network Infrastructure

Griendwerkersstraat 11 3334 KB Zwijndrecht The Netherlands

www.regoort.nl

Graphicshow Cable Accessories (GCA) Ltd

Ronell Place 41A Shire Hill Industrial Estate Saffron Walden, Essex CB11 3AQ United Kingdom

www.gcaltd.co.uk

ESK India Commerse & Trade Pvt Ltd

229/239, Rectangle No. 51 Khasra No. 02, Vill.Kherki Daula Near Haldirams, Gurgaon-122004, India

www.eskindia.in

Elektroskandia (Shanghai) Co.,Ltd.

355 Qin Qiao Road, Jinqiao Export Processing Zone, 201206, Shanghai, P.R.China

www.elektroskandia.com.cn

North America Central America China

IndiaSouth Africa

Europe

Elektroskandia Sweden AB

Norrvikenleden 97 SE-191 83 Sollentuna Sweden

www.elektroskandia.se

ElectroWave Solutions Durban KwaZulu Natal South Africa

www.electrowavesa.com

Resellers

product catalouge - mafi · joint plate kit crossover kit combiclamp family 3-sector antenna...

Documents