product catalogue - hynds pipe systems ltd · cast iron cast iron access ... surface boxes hydrant...
TRANSCRIPT
StreetwareProduct Catalogue
Hyn
ds S
tree
twar
e C
atal
ogue
| M
arch
20
16
CO
NT
EN
TS
CAST IRONCAST IRON ACCESS COVERS
Manhole Cover and Frame Sets 8
Napier 8
Palmerston North 9
Christchurch 9
Queenstown 9
Invercargill 9
HYTECH
Manhole Cover and Frame Sets 10
Hamilton 10
CAST IRON CIRCULAR MANHOLE GRATES
Manhole Grate and Frame Sets 11
CAST IRON INSPECTION COVERS
Screw Down Inspection Cover and Frame Sets 12
CAST IRON STORMWATER GRATES
Cesspit Grate and Frame Sets 13
Whangarei 14
Bay of Plenty 14
Hamilton 14
New Plymouth 14
Palmerston North 15
Napier 15
Wellington 15
Christchurch 15
Queenstown 15
Dundedin 16
Invercargill 16
NON SLIP HEELGUARD GRATES
Cesspit Grate and Frame Sets 17
Trench Grate 17
SAFETY GRILLES
Caliber 18
Impact 18
SURFACE BOXES
Hydrant Box 19
Lamphole Box 19
Pressure Sewer Box 19
Toby Box 20
Valve Box 20
Hamilton 21
Napier 21
Palmerston North 21
Wellington 21
Nelson 22
Christchurch 22
Dunedin 22
Invercargill 22
DUCTILE IRONDI ACCESS COVERS
Accio 24
DI HINGED CARRIAGEWAY COVERS
Maestro 25
Twino 26
Maximo 26
Solo 26
DI STORMWATER GRATES AND FRAMES
Hydro Grate and Frame Sets 27
STORMWATER KERB AND CHANNEL GRATES
Tempo Kerb and Channel Grate and Frame Sets 28
G.A.T.I.CG.A.T.I.C INFILLED AND SOLID TOP COVERS
Single Square and Rectangular Cover and Frame Sets 30
G.A.T.I.C DECORATIVE EDGED COVERSDecorative Edged Cover and Frame Sets 31
XPAVE INFILLED COVERSPaver Infill Cover and Frame Sets 32
HYNDS DETAILSTerms and Conditions of Supply 33
Hynds Branches and Map 34 – 35
CONTENTS
ABOUT HYNDS
New Zealand’s premier product supplier for the management of water and water-based waste. Supplying New Zealand’s infrastructure through innovation and partnership.
OverviewEstablished in 1973 Hynds Limited is a large privately owned New Zealand manufacturer and distributor of products for the management of water and water-based waste in the civil and rural infrastructure industry.
Hynds Pipe Systems is the largest operating unit in the group with seven production plants manufacturing spun and precast concrete products; a nationwide network of 32 merchant branches; a fleet of 60 delivery trucks, and over 40,000 product lines available.
Commitment to quality management and accredited operating systemsHynds maintains an independently audited third party accreditation for the ISO9001 certified quality management systems, and follow founding policies that underpin commitment and performance outcomes to achieve our organisational vision and values. ‘S’ Mark accreditation is maintained by regular audits.Auckland and Christchurch factories have independent third party accreditation for the manufacture of pressure and non pressure pre-cast pipe to AS/NZS 4058:2007 standard.
How To Find UsFor information about any product not shown in this price catalogue, please do not hesitate to contact your nearest Hynds Branch or phone 0800 WE PIPE (93 7473)
Hynds terms and conditionsPlease refer to our published Terms and Conditions of Supply on page 33 of this catalogue.
Further information and our full comprehensive range
of product can be viewed on www.hynds.co.nz
PRODUCT_NAME H
ynds
Str
eetw
are
Cat
alog
ue |
D
ecem
ber
20
15
CA
TE
GO
RY
6
Hynds supplies a range of Streetware castings that meets the requirements of both currently recognised International Standards AS3996-2006 and EN124, while also achieving the needs of Transit NZ’s HN-HO-72*.
The table below compares the ultimate design load capabilities of both International Standards.
European Standard EN 124
Australian StandardAS3996
Description
Category A 15 kN
Class A 10kN
Examples: Pedestrian and cycleways, garage doors, domestic drives, lawned areas
Category B 125kN
Class B 80kN
Examples: Light vehicle driveways, private car parks, pedestrian precincts
Category C 250kN
Class D 210kN
Examples: Service stations (cars), parkside areas, paved areas, kerbsides
Category D 400kN
Class E 400kN
Examples: Carriageway locations, service station forecourts, public areas
Category E 600kN
Class F 600kN
Examples: Industrial areas, forklifts, docksides
Category F 900kN
Class G 900kN
Examples:Airport runways, service yards and lorry parks, military bases
Loadings are a guide only and don't take into account specific forces and vehicle configurations. If in doubt please contact Hynds regarding clarification and recommendation for the best castings to suit your requirements.
*Transit New Zealand loading required to meet HN-HO-72 240KN
Load ClassesAustralian Standard AS3996 | European Standard EN 124
PRODUCT_NAME
Hyn
ds S
tree
twar
e C
atal
ogue
|
D
ecem
ber
20
15
CA
TE
GO
RY
7
CAST IRON Gray (Flake Graphite) Grade T220. Traditional, Robust, Reliable.
Hynds offers the full range of municipal infrastructure castings as well as regional specific castings to meet all traditional requirements.
7
MANHOLE COVER AND FRAME SETS H
ynds
Str
eetw
are
Cat
alog
ue |
M
arch
20
16
CA
ST
IR
ON
AC
CE
SS
CO
VE
RS
8
CAST IRON ACCESS COVERSHynds offer a comprehensive range of cast iron access covers and frames to suit all standard municipal requirements.
► 450 – 500 mm clear opening ► Easily retrofits to existing concrete manhole tops
► Load rated to Class B and Class D in AS3996:2006
► Flat and spigoted frames available
REGIONALHynds offer a comprehensive range of regional manhole access covers and frames, previously supplied by local region foundries, to meet Regional Council requirements.
NAPIER
Product Code Description
CIMCF-NAPIER 500 mm Ø Opening Napier CC
MANHOLE COVER AND FRAME SETS
Product Code Description
CI450CF 450 mm Ø Opening Light Duty Class B
CIMLDCF 500 mm Ø Opening Light Duty Class B
CIMLDCF-SP 500 mm Ø Opening Spigot Light Duty Class B
CIMHDCF 500 mm Ø Opening Heavy Duty Class D
CIMHDCF-SP 500 mm Ø Opening Spigot Heavy Duty Class D
CIMLDFC-S 500 mm Ø Opening Light Duty Sealed Class B
CIMHDFC-S 500 mm Ø Opening Heavy Duty Sealed Class D
Hyn
ds S
tree
twar
e C
atal
ogue
|
M
arch
20
16
9
REGIONAL
CA
ST
IR
ON
AC
CE
SS
CO
VE
RS
PALMERSTON NORTH
Product Code Description
CIMHCSFSPNC 500 mm Ø Opening Sewer Spigot PNCC CABBAGE TREE Class D
CIMHCSFSPNCR 500 mm Ø Opening Sewer Spigot PNCC COMMON RUSH Class D
CIMHCSFSPNM 500 mm Ø Opening Sewer Spigot PNCC MAKURA Class D
CIMHCSFSPNR 500 mm Ø Opening Sewer Spigot PNCC RAUPO Class D
CIMHCSFSPNS 500 mm Ø Opening Sewer Spigot PNCC SWAMP FLAX Class D
CIMHCSFSPNT 500 mm Ø Opening Sewer Spigot PNCC TOE TOE Class D
CIMHCSFSPNU 500 mm Ø Opening Sewer Spigot PNCC UMBRELLA SEDGE Class D
CIMHCSFSPNW 500 mm Ø Opening Sewer Spigot PNCC WILLOW WEED Class D
CIMHCSFSWPNB 500 mm Ø Opening SW Spigot PNCC BULLY Class D
CIMHCSFSWPNE 500 mm Ø Opening SW Spigot PNCC EEL Class D
CIMHCSFSWPNI 500 mm Ø Opening SW Spigot PNCC INANGA Class D
CIMHCSFSWPNK 500 mm Ø Opening SW Spigot PNCC KOARO Class D
CIMHCSFSWPNM 500 mm Ø Opening SW Spigot PNCC MUDFISH Class D
CIMHCSFSWPNT 500 mm Ø Opening SW Spigot PNCC TORRENT Class D
CHRISTCHURCH
Product Code Description
CIMHCFS 562 × 434 mm Opening (Diagonal Split Cover) Christchurch
CIMHCFSD 1000 × 700 mm Opening (Double Cover) Christchurch
CICBUBCF 255 × 155 mm Opening Bubble Up 9 × 5”
CIC300300LFS 300 × 300 mm Opening South Island Class A
CIC375375LFS 375 × 375 mm OpeningSouth Island Class A
QUEENSTOWN
Product Code Description
CIMHQTN-F 500 mm Ø Opening Spigot Sewer Queenstown Heavy Duty Class D
CIMHQTN-S 500 mm Ø Opening Spigot Stormwater Queenstown Heavy Duty Class D
INVERCARGILL
Product Code Description
CIMLDCF-ICC 500 mm Ø Opening Invercargill CC Light Duty Class B
CIMHDCF-ICC 500 mm Ø Opening Invercargill CC Heavy Duty Class D
Hyn
ds S
tree
twar
e C
atal
ogue
|
M
arch
20
16
10
MANHOLE COVER AND FRAME SETS H
YT
EC
H
HYTECHHynds supply the Hytech range as a response to local body authority requests for cast iron streetware products, manufactured to a recognised standard, and supported by an independent third party testing programme.
► Load tested to Australian Standard AS3996:2006
► Carry the NZ Standards Mark
► Third Party accreditation by OPUS International Consultants
MANHOLE COVER AND FRAME SETS
Product Code Description
CIMHDNRCFHT 500 mm Ø Opening Hytech Heavy Duty Non Rock Class D AS3996
CIMLDCFHT 500 mm Ø Opening Hytech Light Duty Class B AS3996
CIMLDCFHT-SP 500 mm Ø Opening Hytech Light Duty Spigot Class B AS3996
CIMHDCFHT 500 mm Ø Opening Hytech Heavy Duty Class D AS3996
CIMHDCFHT-SP 500 mm Ø Opening Hytech Heavy Duty Spigot Class D AS3996
Scan for Technical Guide
SP2.3
HAMILTON
Product Code Description
CICHDMWGFHTHCC 660 × 445 mm Opening Motorway Hytech Hamilton CC Class D
Hyn
ds S
tree
twar
e C
atal
ogue
|
M
arch
20
16
11
MANHOLE GRATE AND FRAME SETS
CA
ST
IR
ON
CIR
CU
LA
R M
AN
HO
LE
GR
AT
ES
MANHOLE GRATE AND FRAME SETS
Product Code Description
CI450GF 450 mm Ø Opening Light Duty
CIMLDGF 500 mm Ø Opening Light Duty Class B
CIMLDGF-SP 500 mm Ø Opening Spigot Light Duty Class B
CIMHDGF 500 mm Ø Opening Heavy Duty Class D
CIMHDGF-SP 500 mm Ø Opening Spigot Heavy Duty Class D
CAST IRON CIRCULAR MANHOLE GRATESHynds offer a complimentary range of circular stormwater grates for manhole frames, to meet the needs of councils’ and regions’ municipal and civil requirements.
► 450 - 500 mm clear opening ► Load rated to Class B and Class D in AS3996:2006
► Flat and spigoted frames available
Hyn
ds S
tree
twar
e C
atal
ogue
|
M
arch
20
16
12
SCREW DOWN INSPECTION COVER AND FRAME SETSC
AS
T I
RO
N I
NS
PE
CT
ION
CO
VE
RS
CAST IRON INSPECTION COVERSHynds offer a range of inspection covers and frames for access to grease traps, electrical pits, and other places where regular maintenance is required.
► Single seal inspection ► Stainless steel allen head screws lock cover down
► Can be watertight with the addition of silicon sealant
► Load rated to Class A – Light duty non trafficable
► Range in size from 300 x 300 mm up to 600 x 600 mm opening
SCREW DOWN INSPECTION COVER AND FRAME SETS
Product Code Description
CII300300CF 300 × 300 mm Opening Class A
CII450450CF 450 × 450 mm Opening Class A
CII600450CF 600 × 450 mm Opening Class A
CII600600CF 600 × 600 mm Opening Class A
Hyn
ds S
tree
twar
e C
atal
ogue
|
M
arch
20
16
13
CESSPITE GRATE AND FRAME SETS
CA
ST
IR
ON
ST
OR
MW
AT
ER
GR
AT
ES
CAST IRON STORMWATER GRATESHynds offer a comprehensive range of storm water grates and frames, to suit the range of concrete cesspits, and compatible with all regional council requirements.
► Sized to suit standard sump range ► Load rated from Class B to Class D in AS3996:2006
► 300 x 300 mm opening grate of ductile iron to Class C
► Anti theft brackets and screws available for 675 x 450 mm sump sets
CESSPIT GRATE AND FRAME SETS
Product Code Description
CIC300300GF 300 × 300 mm Opening supplied with DI Grate Class C
CIC300450GF 450 × 300 mm Opening Class C
CIC450450GF 450 × 450 mm Opening Class B
CIC675450GF 675 × 450 mm Opening Class D
CIC675450AS 675 × 450 mm Opening Class D Allen Screw
CIC675450B 675 × 450 mm Opening Class D Security Bracket
CIC675450HDGF 675 × 450 mm Opening Heavy Duty Class D
Hyn
ds S
tree
twar
e C
atal
ogue
|
M
arch
20
16
14
REGIONALC
AS
T I
RO
N S
TO
RM
WA
TE
R G
RA
TE
S
REGIONALHynds offer a comprehensive range of stormwater grates and frames, previously supplied by local region foundries, to meet regional council requirements.
WHANGAREI
Product Code Description
CIC675450WCC 675 × 450 mm Opening NZTA Motorway Class D
BAY OF PLENTY
Product Code Description
CIC675580BEGF 675 × 580 mm Opening Back Entry BOP Class D
HAMILTON
Product Code Description
CICHDMWGFHTHCC 660 × 445 mm Opening Motorway Hytech Hamilton CC Class D
Product Code Description
CIGNP 615 × 360 mm Opening Sump Top Grate CI New Plymouth DC
Hyn
ds S
tree
twar
e C
atal
ogue
|
M
arch
20
16
15
REGIONAL
CA
ST
IR
ON
ST
OR
MW
AT
ER
GR
AT
ES
PALMERSTON NORTH
Product Code Description
CICHDGFS 640 × 410 mm Opening Transverse Heavy Duty Capital Region Class D
CICHDGFTT 640 × 410 mm Opening Transverse Heavy Duty TEXT Palmerston North Class D
CICP760410 760 × 410 × 20 mm Crossing Plate CI Manawatu/ Horowhenua DC
NAPIER
Product Code Description
CIHDGFSW-NAPIER 645 × 425 mm Opening Napier CC Heavy Duty Class D
WELLINGTON
Product Code Description
CIHDFG-WCC 585 × 365 mm Opening Longitudinal Heavy Duty Wellington CC Class D
CIHDFG-CFWCC 585 x 365 mm Opening Transverse (Cycle) Heavy Duty Wellington CC Class D
CHRISTCHURCH
Product Code Description
CIC300300GFS 300 × 300 mm Opening Christchurch CC
CICC500450WGF 500 x 450 mm Opening Wobbly Christchurch Class C
CIVGFS 421 x 178 mm Opening for MH Lid Vent Christchurch
QUEENSTOWN
Product Code Description
CIC600400GFS 593 × 387 mm Opening #2 c/w 2 Cross Bars Queenstown Lakes DC Class D
Hyn
ds S
tree
twar
e C
atal
ogue
|
M
arch
20
16
16
REGIONAL C
AS
T I
RO
N S
TO
RM
WA
TE
R G
RA
TE
S
DUNEDIN
Product Code Description
CIMTDCCGF 593 × 387 mm Opening #2 Mud Tank Dunedin CC Class D
INVERCARGILL
Product Code Description
CIC534355GFICC 534 x 355 mm Opening Invercargill CC
Hyn
ds S
tree
twar
e C
atal
ogue
|
M
arch
20
16
17
CESSPIT GRATE AND FRAME SETS
HE
ELS
AFE
GR
AT
ES
NON SLIP HEELGUARD GRATESHynds offer a range of pedestrian safe heelguard grates for situations where safety under foot is of paramount concern. Non slip, epoxy coated and rated to Class A and Class D our heelguard grates are compatible with the standard range of concrete sumps.
► Non slip epoxy coating ► Galvanised steel construction for long life ► Flat edged frame for ease of use with pavers or concrete/ asphalt
► Sump and trench versions available ► Class A and Class D rated
Scan for Technical Guide
SP2.8
CESSPIT GRATE AND FRAME SETS
Product Code Description
GGHS450450AGF 450 × 450mm Galv Mild Steel Heel Proof Grate and Frame Class A
GGHS610610AGF 610 × 610mm Galv Mild Steel Heel Proof Grate and Frame Class A
GGHS675450AGF 675 × 450mm Galv Mild Steel Heel Proof Grate and Frame Class A
GGHS910610AGF 910 × 610mm Galv Mild Steel Heel Proof Grate and Frame Class A
GGHS910910AGF 910 × 910mm Galv Mild Steel Heel Proof Grate and Frame Class A
GGHS300300DGF 300 × 300mm Galv Mild Steel Heel Proof Grate and Frame Class D
GGHS450450DGF 450 × 450mm Galv Mild Steel Heel Proof Grate and Frame Class D
GGHS610610DGF 610 × 610mm Galv Mild Steel Heel Proof Grate and Frame Class D
GGHS675450DGF 675 × 450mm Galv Mild Steel Heel Proof Grate and Frame Class D
GGHS910610DGF 910 × 610mm Galv Mild Steel Heel Proof Grate and Frame Class D
GGHS910910DGF 910 × 910mm Galv Mild Steel Heel Proof Grate and Frame Class D
TRENCH GRATES
Product Code Description
GGHS300ATGF 300mm x 1m Galv Mild Steel Heel Proof Trench Grate and Frame Class D
GGHS300DTGF 300mm x 1m Galv Mild Steel Heel Proof Trench Grate and Frame Class A
Hyn
ds S
tree
twar
e C
atal
ogue
|
M
arch
20
16
18
CALIBER | IMPACTS
AFE
TY
GR
ILLE
S
SAFETY GRILLESHynds supply two brands of manhole safety grilles. Both have been developed as a safety device to prevent accidental entry to a manhole.
► For stormwater and sewer manholes ► Watercare approved ► Made in New Zealand
► Can be retro – fitted to existing or new manholes
► Easily removed when access is required ► 500 mm and 600 mm openings ex stock (other sizes available on request) Scan for
Technical Guide SP4.2
Scan for Technical Guide
SP4.1
CALIBERThe Caliber is a robust grille which can be retrofitted to existing or new frames as required. Load tested to Class A in AS3996:2006.
STAINLESS STEEL
Product Code Description
MHG0500CSS 500 mm Ø Opening s c/w Eye Bolts
MHG0600CSS 600 mm Ø Opening c/w Lugs
MHG0600CSSB 600 mm Ø Opening to fit Maestro
MHG0600CSSK 600 mm Ø Opening c/w Eye Bolts to fit Korum
MHG0600CSST 600 mm Ø Opening to fit Twino
IMPACTThe Impact is a versatile retrofit grille which is adjustable to suit a wide range of opening sizes.
STAINLESS STEEL
Product Code Description
MHG0500SSI 500 mm Ø Opening
MHG0600SSI-A 600 mm Ø Opening to fit Accio
MHG0600SSI-M 600 mm Ø Opening to fit Maestro
MHG0600SSI-T 600 mm Ø Opening to fit Twino
MHG0600TCC 600 mm Ø Opening Tauranga CC type
Hyn
ds S
tree
twar
e C
atal
ogue
|
M
arch
20
16
19
SURFACE BOXES
SU
RFA
CE
BO
XE
S
SURFACE BOXESHynds supply the full range of surface boxes to meet regional and municipal council requirements.
HYDRANT BOX
Product Code Description
BFHCIC 405 × 255 mm Hydrant (FH) Box Class B
BFHCICEH 400 × 255 mm Hydrant (FH) Box Extra H/ Duty
BFHCICH 400 × 255 mm Hydrant (FH) Box H/ Duty Class D
BRFHCICH 405 × 250 mm Roadway Hydrant (FH) Box H/ Duty
BMCIC 405 × 255 mm Meter (METER) Box Class B
BMCICH 400 × 245 mm Water Meter (WM) Box H/ Duty Class D
BMCICEHD 400 x 255 mm Meter (METER) Box Extra Heavy Duty
BRECIC 405 × 255 mm Rodding Eye (RE) Box Class B
BRECICH 405 × 245 mm Rodding Eye (RE) Box H/ Duty Class D
LAMPHOLE BOX
Product Code Description
LHCF-SEW 225 mm Ø Sewer Lamphole Box
LHCF-STW 255 mm Ø Stormwater Lamphole Box
LHFC 250 mm Ø Standard Lamphole Box
PRESSURE SEWER BOX
Product Code Description
BVCICFPSV 220 × 170 mm Pressure Sewer Valve Box
BVCICFPSC 365 × 225 mm Pressure Sewer Clean Out Box
Hyn
ds S
tree
twar
e C
atal
ogue
|
M
arch
20
16
20
SURFACE BOXES S
UR
FAC
E B
OX
ES
TOBY BOX
Product Code Description
BVCIR100 100 mm Ø Diameter Toby Valve Box
TOBY100SQ-PF 100 x 100 mm Square Toby Valve Box c/w Hinged Cover
TOBY150SQ-PF 150 x 150 mm Square Toby Valve Box c/w Hinged Cover
VALVE BOX
Product Code Description
BPVCIC 255 × 235 mm Peet Valve Box Class B
BSVCIC 255 × 235 mm Sluice Valve Box Class B
BVCIC 255 × 235 mm Valve Box Class B
BVCICH 245 × 200 mm Valve Box Small H/Duty
BVCICLH 255 × 235 mm Valve Box Large H/Duty Class D
BVCIR150 150 mm Ø Diameter Valve Box
Hyn
ds S
tree
twar
e C
atal
ogue
|
M
arch
20
16
21
REGIONAL
SU
RFA
CE
BO
XE
S
REGIONALHynds offer a comprehensive range of regional manhole access covers and frames, previously supplied by local region foundries, to meet regional council requirements.
HAMILTON
Product Code Description
BMCIC-H 445 × 220 mm METER Box Hamilton CC
BFHCIC-H 400 × 250 mm Hydrant (FH) Box Hamilton CC
TOBYCI-HCC 135 mm Ø Diameter Toby Box CI Hamilton CC
BVCIC-H 240 × 195 mm Valve Box Hamilton CC
NAPIER
Product Code Description
BFHCIC-NAP 400 × 254 mm Hydrant (FH) Box Napier CC
BSVCICNAP 253 x 203 mm Sluice Valve Box Napier CC
TOBYSQ-NAPIER 100 x 100 mm Square Toby Box Napier CC
PALMERSTON NORTH
Product Code Description
BSVCIC-N 250 x 245 mm Shallow Sluice Valve Box PNCC
BGCISC 250 x 245 mm Shallow Gas Valve Box
BFHCIC-PNCC 405 x 250 mm Shallow Hydrant (FH) Box PNCC
BWCISC 405 x 250 mm Shallow Water Box PNCC
BSCISC 405 x 250 mm Shallow Sewer Box PNCC
BGHCISC 405 x 250 mm Shallow Gas Box PNCC
WELLINGTON
Product Code Description
BSVCIC-WCC 104 mm Ø Diameter Sluice Valve Box Wellington CC
HYDBSL-WCC Hydrant (FH) Box cw Split Lid Wellington CC
REGIONAL H
ynds
Str
eetw
are
Cat
alog
ue |
M
arch
20
16
SU
RFA
CE
BO
XE
S
22
NELSON
Product Code Description
VBCCON 120 mm Ø Diameter Conical (SV) Box Nelson CC
BSCIC-N 400 × 252 mm Sewer Box Nelson CC
BSCWCIC-N 400 × 252 mm Stormwater Box Nelson CC
CHRISTCHURCH
Product Code Description
BWWCICHD 400 × 255 mm WasteWater Box H/Duty Christchurch CC
DUNEDIN
Product Code Description
CIDCCCI193 193 mm Ø Diameter Inspection Box Dunedin CC
CIDCCCI219 219 mm Ø Diameter Inspection Box Dunedin CC
CIDCCCL255 255 mm Ø Diameter Lamphole Box Dunedin CC
INVERCARGILL
Product Code Description
TOBYCI-ICC 120 mm Ø Diameter Toby Box Invercargill CC
BVCICSQ-ICC 137 × 137 mm Valve Box Invercargill CC
BFHCIC-ICC 264 × 422 mm Hydrant (FH) Box Invercargill CC
BCECICS-ICC 195 × 470 mm Cleaning Eye (CE) Box Invercargill CC
BCECICL-ICC 264 × 422 mm Cleaning Eye (CE) Box Invercargill CC
REGIONAL / HYNDS
DUCTILE IRON Ductile (Spheroidal Graphite) Grade 500/7Innovative, Lightweight, Robust
Hynds Ductile Iron range is internationally recognised and utilises all the latest trends to offer cutting edge design and quality manufacture.DI castings are 30% lighter than traditional cast iron, but achieve higher load ratings through superior material use.
23
ACCIO H
ynds
Str
eetw
are
Cat
alog
ue |
M
arch
20
16
DU
CT
ILE
IR
ON
AC
CE
SS
CO
VE
RS
24
DUCTILE IRON ACCESS COVERSHynds offer an internationally recognised range of ductile iron castings, in line with current market strategies, and council requirements. This range is supplied under the brand name of UBER. Personalisation is a feature of the UBER range, with specific council designs already supplied e.g. Hamilton, Wellington, Nelson and Christchurch city councils.
► Meets HN-HO-72 requirements for bolt down security cover
► Lids identified as sewer or stormwater
► Up to 40% lighter than comparable cast iron covers
► Complies with AS3996:2006 Standard ► Personalisation on request
Scan for Technical Guide
SP2.2
ACCIO
Product Code Description
DIMHSTCF500 500 mm Ø Opening Solid Top Class D240
DIMHSTSCFB 600 mm Ø Opening Accio Solid Top Sewer Class B
DIMHSTSCFD 600 mm Ø Opening Accio Solid Top Sewer Class D
DIMHSTSTCFD 600 mm Ø Opening Accio Solid Top Stormwater Class D
DIMHSTHCF 600 mm Ø Opening Solid Top for HYSEAL Manholes Class D240
DIMHCFHCC605 600 mm Ø Opening Accio Hamilton City Council Closed Class D
MAESTRO
Hyn
ds S
tree
twar
e C
atal
ogue
|
M
arch
20
16
DI
HIN
GE
D C
AR
RIA
GE
WA
Y C
OV
ER
S
25
Scan for Technical Guide
SP2.1
► Exceeds HN-HO-72 ► Complies with AS3996:2006 to class E400 Personalisation avaliable (e.g. Council Logo)
► Non rock stability through unbroken 360 degree EPDM sealing rubber
► Cover locks open at 90 degree
DI HINGED CARRIAGEWAY COVERSDuctile iron hinged access cover system for use in high intensity traffic environments where strength, performance, stability and dealing against water ingress is a priority.
MAESTRO
Product Code Description
DIMHMCFHS 600 mm Ø Opening Maestro Hinged and Sealed Class D DI
DIMHMCFHS-D 600 mm Ø Opening Maestro Hinged and Sealed Class D DI, drilled frame for Calibre Grill
DIMHMLCFHS 600 mm Ø Opening Maestro Hinged Sealed and Locked Class D400
DIMHMCFHSSEWWCC 600 mm Ø Opening Maestro Hinged DI Stormwater WCC Class D400
DIMHMCFHSSTWWCC 600 mm Ø Opening Maestro Hinged DI Sewer WCC Class D400
DIMHMCFHSSTWCCC 600 mm Ø Opening Maestro Hinged DI Stormwater CCC Class D400
DIMHMCFHSWTWCCC 600 mm Ø Opening Maestro Hinged DI Wastewater CCC Class D400
DIMHMCFHSSTWNCC 600 mm Ø Opening Maestro Hinged DI Stormwater NCC Class D400
DIMHMCFHSWTWNCC 600 mm Ø Opening Maestro Hinged DI Wastewater NCC Class D400
DIMHMCFHS-S 600 mm Ø Opening Maestro EPDM Seal
MAESTROManufactured in France for use in high intensity traffic environments, the Maestro 600 mm Clear Opening Hinged Access Cover features a 360° Polypro EPDM sealing rubber, allowing use in stormwater and wastewater situations. Load rated to 400 kN (40 Tonne).
TWINO | MAXIMO | SOLO H
ynds
Str
eetw
are
Cat
alog
ue |
M
arch
20
16
DI
HIN
GE
D C
AR
RIA
GE
WA
Y C
OV
ER
S
26
TWINO
Product Code Description
DIMHTCFHS 600 mm Ø Double Torsion Bar Twino Class D
DIMHTLCFHS 600 mm Ø Double Torsion Bar Twino Locked Class D
DIMHTVCFHS 600 mm Ø Double Torsion Bar Twino Vented Class D
DIMHTVMP MH Twino Vented Mudpan for use with 600mm
TWINOManufactured in France for council use in high intensity traffic environments, the Twino is a multipurpose 600 mm clear opening hinged access cover system, with twin parallel torsion spring bars. All council needs can be met with three versions, Standard, Lockable and Vented (with mudpan). Load rated to 400 kN (40 Tonne).
MAXIMOManufactured in France for use in high intensity traffic environments, the Maximo 800 mm clear opening, hinged, bolt down and sealed access cover system, has a gas strut to assist with lifting of the cover, reducing lifting effort to 15 kg. Load rated to 400 kN (40 Tonne).
SOLOManufactured in France for use in heavy industrial environments. The Solo 600 mm clear opening, hinged, bolt down and sealed access cover system, and grated cover system, are specifically designed to suit the higher loadings associated with ports and airports. Load rated to 900 kN (90 Tonne).
MAXIMO
Product Code Description
DIMHMAXCFHS 800 mm Ø Opening Maximo Class D
SOLO
Product Code Description
GATIC-300S5G 600 mm Ø Opening Solo Hinged and Sealed Class G DI
GATIC-320G6G 600 mm Ø Opening Solo Grate and Frame Class G
Scan for Technical Guide
SP2.10
Scan for Technical Guide
SP2.9
HYDRO GRATE AND FRAME SETS
Hyn
ds S
tree
twar
e C
atal
ogue
|
M
arch
20
16
DU
CT
ILE
IR
ON
ST
OR
MW
AT
ER
GR
AT
E S
YS
TE
M
27
DUCTILE IRON STORMWATER GRATES AND FRAMESDuctile iron stormwater grate system in response to the need for improved capture, higher loadings, cycle friendliness and greater aesthetic appeal.
► Improved hydraulic capture ► Complies to AS/NZS3996:2006 ► Hinged and bolted down preventing theft ► Cycle friendly
► Fits standard concrete sumps ► Frame incorporates side locking for better anchoring in surrounding concrete apron
► Lightweight grate rated to Class D240 to meet HN-HO-72 Transit requirements Scan for
Technical Guide SP2.5
HYDRO GRATE AND FRAME SETS
Product Code Description
DIHSTGFD450450 450 × 450 mm Hydro SW Class D240 DI
DIHSTGF535340WC 535 × 340 mm Hydro SW Class D240 WCC
DIHSTGFD580350 580 × 350 mm Hydro SW Class D240 DI
DIHSTGFD580350C 580 × 350 mm Hydro SW Class D240 DI Concave
DIHSTGFD580350W 580 × 350 mm Hydro SW Class D240 DI Wide Frame
DIHSTGFD 675 × 450 mm Hydro SW Class D240 DI
DIHSTGFDVG 675 × 450 mm Hydro SW Class D240 c/w Vertical Grill
DIHSTGFD800450 800 × 450 mm Hydro SW Class D240 DI
TEMPO KERB AND CHANNEL GRATE AND FRAME SETS H
ynds
Str
eetw
are
Cat
alog
ue |
M
arch
20
16
ST
OR
MW
AT
ER
KE
RB
AN
D C
HA
NN
EL
GR
AT
ES
28
STORMWATER KERB AND CHANNEL GRATESManufactured in France to meet special requirements associated with smaller subdivisional streetscapes.
► Complies to EN124 Class C250 ► Cycle friendly ► Fits standard concrete sump
Scan for Technical Guide
SP2.7
TEMPO KERB AND CHANNEL GRATE AND FRAME SETS
Product Code Description
DITA500680GFH 500 × 500 × 125 mm Hinged DI TEMPO500A (mountable)
DITT500680GFA 500 × 500 × 200 mm Hinged DI TEMPO500T
DIT500680GFPT 500 × 680 × 150 mm Adjustable Hinged DI TEMPOPLUS T
G.A.T.I.CDuctile (Spheroidal Graphite) Grade 500/7.
Hynds supplies Gas, Water and Airtight covers from internationally recognised manufacturers to meet all loading requirements, from Class B (Pedestrian) to Class F/G (Airports/ Ports).
29
SINGLE SQUARE AND RECTANGULAR COVER AND FRAME SETS H
ynds
Str
eetw
are
Cat
alog
ue |
M
arch
20
16
GA
TIC
IN
FIL
LE
D A
ND
SO
LID
TO
P C
OV
ER
S
30
G.A.T.I.C INFILLED AND SOLID TOP COVERSGas and airtight covers for multiple uses in residential, light and heavy commercial, ports and airports.
► Meets and complies with standard AS3996 and EN124
► Load rated to Class B, Class D and Class G ► Machined mating surfaces
► Decorative edged with brass or stainless steel on request
► Single and multipart available ► Tee or cellular frame available
SINGLE SQUARE AND RECTANGULAR COVER AND FRAME SETS
Product Code Description
GATIC-301C66B 600 × 600 mm Gatic Infilled Class B
GATIC-301C44D 450 × 450 mm Gatic Infilled Class D
GATIC-301C66D 600 × 600 mm Gatic Infilled Class D
GATIC-301C76D 750 × 600 mm Gatic Infilled Class D
GATIC-301C77D 750 × 750 mm Gatic Infilled Class D
GATIC-301C99D 900 × 900 mm Gatic Infilled Class D
GATIC-02302090 600 × 600 mm Gatic Infilled Class F/G
GATIC-301C96G 915 × 600 mm Gatic Infilled Class G
GATIC-2301084.1 600 x 475 mm Gatic Solid Top Class B
GATIC-2301087 900 x 600 mm Gatic Solid Top Class B
GATIC-301S44D 450 × 450 mm Gatic Solid Top Class D
GATIC-301S64D 600 × 475 mm Gatic Solid Top Class D
GATIC-02301093 600 × 600 mm Gatic Solid Top Class D
GATIC-2301095 750 × 600 mm Gatic Solid Top Class D
GATIC-02301097 750 × 750 mm Gatic Solid Top Class D
GATIC-301S96D 915 × 600 mm Gatic Solid Top Class D
GATIC-301S99D 900 × 900 mm Gatic Solid Top Class D
2 PART COVER AND FRAME SETS
Product Code Description
GATIC-02301122 600 × 1270 mm Gatic 2 Part Infilled Class D
GATIC-02301135 600 × 1270 mm Gatic 2 Part Solid Top Class D
GATIC-302C6111E 600 × 1143 mm Gatic 2 Part Infilled Class E
GATIC-302C6112F 600 × 1295 mm Gatic 2 Part Infilled Class F/G
3 PART COVER AND FRAME SETS
Product Code Description
GATIC-2301181 600 × 1940 mm Gatic 3 Part Solid Top Class D
GATIC-02301191 600 × 1980 mm Gatic 3 Part Infilled Class G
GATIC-02302190 2000 × 600 mm Gatic 3 Part Infilled Class F/G
Scan for Technical Guide
SP2.4
DECORATIVE EDGED COVER AND FRAME SETS
Hyn
ds S
tree
twar
e C
atal
ogue
|
M
arch
20
16
GA
TIC
DE
CO
RA
TIV
E E
DG
ED
CO
VE
RS
31
G.A.T.I.C DECORATIVE EDGED COVERSGas and airtight decorative edged covers for multiple uses in residential, light and heavy commercial.
► Meets and complies with standard AS3996 and EN124
► Load rated to Class B and Class D ► Machined mating surfaces
► Decorative ddged with brass or stainless steel
► Single and multipart available
DECORATIVE EDGED COVER AND FRAME SETS
Product Code Description
GATIC-02301025 300 × 300 mm Gatic Infilled c/w 12 mm SS Edge Class B
GATIC-02301031 600 × 600 mm Gatic Infilled c/w 12 mm SS Edge Class B
GATIC-02301033 600 × 600 mm Gatic Infilled c/w 40 mm SS Edge Class B
Scan for Technical Guide
SP2.4
PAVER INFILL COVER AND FRAME SETS H
ynds
Str
eetw
are
Cat
alog
ue |
M
arch
20
16
XP
AV
E I
NFIL
LE
D C
OV
ER
S
32
XPAVE INFILLED COVERSPaver infilled cover to camouflage access points in pedestrian and trafficable areas.
► Xpave has a deep recess to accommodate thicker pavers
► Laser cut to ensure precise tolerances ► Discreet and unobtrusive
► Complies with EN124 loading up to C250kN
PAVER INFILL COVER AND FRAME SETS
Product Code Description
INFILXPAV600600 600 × 600 mm Xpave Paver Infilled Class C250
Hyn
ds S
tree
twar
e C
atal
ogue
|
M
arch
20
16
33
TE
RM
S A
ND
CO
ND
ITIO
NS
1. APPLICABILITYUnless otherwise agreed in writing by Hynds, all quotes given by Hynds, and supply of Goods by Hynds to the Customer are governed by these terms and conditions to exclusion of all other terms and conditions or representations. These terms and conditions will not be deemed to be modified, cancelled or waived in whole or in part except by written amendment of Hynds. In these terms and conditions: “Hynds” means Hynds Pipe Systems Ltd and includes any of its divisions; “Customer” means any company, person or other body which orders or requests, either itself or through an agent, the supply of Goods from Hynds or makes an application for credit from Hynds in relation to any such supply; “Goods” means all products manufactured and distributed by Hynds for drainage, watermain, environmental and rural applications, including, without limitation, fabricated products, concrete spun pipe and precast products, clay pipe systems, streetware and associated systems, water and wastewater management products and systems, pumps, fittings, valves and hydrants, plastic, steel and iron pipes and all associated services and hireage; “GST” means goods and services tax. pursuant to the Goods and Services Tax Act 1985; "Guarantor" means any person or entity that at any time provides a guarantee to Hynds in respect of the Customer's obligations; "Insolvency Event" includes, in respect of any person, when that person commits an act of bankruptcy, makes an arrangement with any or all of its creditors for rescheduling of any indebtedness, has a receiver, liquidator or voluntary administrator appointed or is otherwise insolvent or deemed to be insolvent; “PPSA means the Personal Property Securities Act 1999; "Security Interest" means a security interest as defined in the PPSA and “Signatory” means any person signing an order or credit application for or on behalf of the Customer.
2. PRICESPrices and Price lists, with the exception of Hynds written quotations, are subject to variation by Hynds without notice prior to the confirmation of any order. Unless otherwise agreed by Hynds in writing, the price payable for the Goods is the price specified on the invoice for the particular delivery of Goods. Quotations may be withdrawn or modified by Hynds, at any time prior to receipt of written acceptance. Quotes are otherwise valid to the date stated on the Quotations Header, or for 30 days, and will lapse if not accepted in writing by the Customers within that time. All quotes must be kept confidential between the Customer and Hynds.
3. PAYMENT TERMS, CREDIT AND INTERESTUnless otherwise agreed in writing by Hynds, all Goods must be paid for in cash. If Hynds grants credit to the Customer the following terms shall apply.
a. Payments will be made in full without deduction or set-off no later than the 20th day of the month following invoice.
b. Should the Customer default in payment of any monies due to Hynds or in the performance of any other obligation which it owes to Hynds or any associated company or should any Insolvency Event occur in respect of the Customer or any Guarantor then:
i. All monies due by the Customer to Hynds shall immediately become due and payable. ii. Hynds may charge the Customer interest at Hynds then current bank overdraft rate plus
2% on all overdue amounts, from the date payment was due until payment in full. iii. Hynds may suspend further deliveries of Goods to the Customer until the Customer has
paid all monies due by the Customer to Hynds; and iv. Hynds may revoke all credit provided to the Customer and require that all further deliveries
be on a cash on or before delivery basis.c. Any expenses, costs or disbursements incurred by Hynds in recovering any outstanding monies
including debt collection agency fees or legal fees, shall be recoverable from the Customer.d. Hynds is entitled to request security from the Customer and shall be entitled to withhold the supply of
Goods or credit until such security has been obtained.
4. SET OFFThe Customer authorises Hynds, and any associated company, to apply (without prior notice or demand) any credit balance of the Customer on any account with Hynds or any associated company or any money owed by Hynds or any associated company towards satisfaction of any payment due and payable by the Customer to Hynds or any associated company. This clause is intended to be relied upon by both Hynds and each associated company.
5. RESERVATION OF TITLEAll Goods supplied by Hynds shall remain the property of Hynds until payment in full by the Customer of all amounts owing is received by Hynds. Until property in the Goods passes to the Customer, the Customer shall hold the Goods as a bailee and shall be liable to Hynds accordingly. If the Customer breaches any of these terms and conditions Hynds shall have the right (without giving notice) to retake possession of the Goods and the Customer authorizes Hynds or its representatives, servants, agents of employees to enter any premises upon which the Goods are stored for the purpose of retaking possession of the Goods. Hynds will have no liability to the Customer or any third party in relation to the entry, removal or repossession of the Goods pursuant to this clause and the Customer will indemnify Hynds against any claims, actions or costs that may arise as a result. In the case of Goods supplied under a Hynds Agreement for Hire, payment does not constitute transfer of property in the Goods, with title retained by Hynds.
6. WOODEN PALLET/DUNNAGEWhere wooden pallet/dunnage are supplied by Hynds, Hynds may require the Customer to purchase such pallets/dunnage for such an amount as shall be at the sole discretion of Hynds. All wooden pallets/dunnage supplied by Hynds remain the property of Hynds until the Customer has paid all amounts payable by the Customer to Hynds. The risk of loss of, or damage to such wooden pallets/dunnage passes to the Customer upon delivery to a carrier or to the Customer or nominee, as the case may be. Hynds may, in its sole and absolute discretion, permit the Customer to return purchased wooden pallets/dunnage for credit, provided the Customer provides proof of purchase of the wooden pallets/dunnage
7. PERSONAL PROPERTY SECURITIES ACT 1999a. The Customer must do all such things and execute or arrange for execution of all such documents as
Hynds may require to ensure that Hynds has a perfected first ranking security interest(s) in the Goods and any wooden pallets/dunnage supplied by Hynds.
b. Without limitation to paragraph a. of this clause the Customer grants to Hynds a security interest in all of its present and after acquired personal property as security for all obligations from time to time of the Customer to Hynds.
c. The Customer waives its right to receive a copy of any verification statement(s) under the PPSA and agree that as between Hynds and the Customer, the Customer will have no rights under (or by reference to) sections 114(1)(a), 116, 120(2), 121, 125, 129, 131, 133 and 134 of the PPSA. Immediately upon request by Hynds the Customer must (at the Customers cost) procure from any person considered by Hynds to be relevant to its security position such agreements and waivers as Hynds may at any time require.
8. TAXESGST and any duty or other tax, levy or impost on or relating to the Goods, is payable by the Customer to Hynds upon demand, in addition to the price of the Goods.
9. CLAIMSHynds shall not be liable in respect of any claim for defective Goods unless such claim is notified to Hynds in writing within 7 days of delivery of the Goods. The liability of Hynds for defective Goods shall be limited to an amount not exceeding the purchase price of the defective Goods. Hynds will not otherwise be liable for any loss or damage (including direct or consequential loss, or loss of profits) incurred by the Customer or any third party as a consequence of the Goods being defective. Hynds will not in any circumstances be liable for any loss of damage caused by wilful or accidental damage, negligent or improper use, maintenance or storage or any other circumstances whether or not beyond Hynds’ control.
10. CREDITS"When Goods are supplied as ordered, the Customer does not have the right to return the Goods. However, Hynds may, at its sole and absolute discretion, permit the Customer to return Goods for credit, on the understanding, expressed or otherwise, that a handling fee of up to 15% of the purchase price of the Goods, plus any freight charges, plus GST, may be deducted from the value of the credit. No Goods will be accepted back unless they are returned to Hynds in first class resaleable condition, accompanied by adequate proof of purchase."
11. DELIVERYHynds will use reasonable endeavors to deliver Goods ordered within a reasonable time. Delivery dates are estimates only and Hynds shall not be liable for any damage or loss arising out of delay in delivery. All risks in respect of the Goods will pass to the Customer on delivery to a carrier or to the Customer or nominee as the case may be. If Hynds is requested to store Goods, or if Hynds is required to store Goods because of the fault of the Customer after the Goods are ready for despatch, the Customer shall pay all charges of and incidental to such storage. Such storage will be at the Customer’s risk, and will not entitle the Customer to postpone payment of any sums due to Hynds. A receipted consignment note, bill of lading weigh bill or despatch advice, shall be conclusive proof of delivery unless otherwise stated, delivery costs will be paid by the Customer. Transit insurance to the Customer’s account can be arranged by Hynds if requested by the Customer. Hynds shall not be liable to the Customer or any third party for short delivery, or loss in transit of the Goods. Any deliveries necessitating delivery outside the hours of 7.30am – 4.00pm on weekdays must be by special arrangement. Where the Goods are delivered by Hynds direct to the Customer or nominee, the Customer shall provide at its expense, safe hard roading suitable for use by usual road transport to deliver materials to the site specified by the Customer or to an area alongside such site, with sufficient clear hard space at all times for unloading and stacking and unless otherwise specified, shall supply all necessary cranes and other unloading facilities.
12. ORDERSOrders of Goods may be verbal or written. Hynds will not be liable for any error in the Customers order and the Customer will be responsible for errors arising out of verbal orders not confirmed in writing. Cancellation of orders for Goods placed with and accepted by Hynds may be made only with the written consent of Hynds. Hynds will not be liable for any loss or damage suffered by the Customer or any third party as a result of cancellation of an order.
13. CONFIDENTIALITYAll drawings, designs, specifications, technical data and other information which Hynds supplies in connection with a quotation, or order are confidential. All such information remains Hynds’ property, and must not be disclosed to any third person without our written permission and shall be returned immediately upon Hynds’ request.
14. INTELLECTUAL PROPERTYIf Goods are supplied to the Customer’s designs or specifications the Customer warrants that none of its designs or specifications infringe any copyright, patent or other intellectual property right. If the Customer’s designs or specifications infringe, or are alleged to infringe any patent, registered design, copyright or other intellectual property rights, the Customer will indemnify Hynds for any liabilities incurred by Hynds as a result of the Customers breach of this clause.
15. TESTINGIf the Customer requires any Goods or material samples to be specially tested prior to delivery, arrangements may be made for the carrying out of such tests at the Customer’s cost.
16. CUSTOMER MATERIALSIf the Customer supplies Hynds with its own materials for use in completing the Goods, the Customer undertakes that such materials will be in all respects suitable for the operation for which they are supplied. The Customer will at its own expense replace materials which in Hynds’ opinion are unsatisfactory and will pay Hynds for the cost of work already carried out on such materials and for the cost of any damage incurred by Hynds as a result of such materials being unsatisfactory. Such materials remain the property of the Customer whilst in Hynds possession. The risk of loss of, or damage to, such materials will at all times be borne by the Customer.
17. INVENTORY CONTROLIf Goods are required at the request of the Customer prior to SEVEN (7) day strength being attained, Hynds shall not be liable for any defect or failure in the Goods and the Customer shall indemnify Hynds against any claims made in respect of any such defect or failure.
18. FARM GRADE/SECOND GRADE GOODSFarm grade/second grade Goods are sold as such and marked accordingly. Under no circumstances should farm grade and/or second grade Goods be used as a substitute for first grade Goods and Hynds shall not be liable for any loss or damage caused by such substitutions or attempted substitutions.
19. FORCE MAJEUREHynds will not be liable to the Customer if delivery of the Goods is prevented or delayed, by reason of any circumstances beyond Hynds’ reasonable control.
20. CONSUMER GUARANTEES ACT 1993The Customer agrees that where it is buying the Goods for the purposes of a business the Consumer Guarantee Act 1993 does not apply. The implied conditions under the Sale of Goods Act 1908 do not apply to the supply of Goods by Hynds to the Customer.
Terms and Conditions of Supply
Hynds Pipe Systems Limited PO Box 58142, Botany, Auckland 2163, New Zealand
P +64-9-274 0316 F +64-9-272 7485 www.hynds.co.nz
Hyn
ds S
tree
twar
e C
atal
ogue
|
M
arch
20
16
BR
AN
CH
ES
34
Branches North Island
Whangarei 33 Kioreroa Road P 09 438 7305 F 09 438 9624
Warkworth 59 Morrison Drive P 09 425 9837 F 09 425 0581
Albany 6 Cowley Place P 09 415 9259 F 09 415 9522
Avondale 88–98 Patiki Road P 09 820 0122 F 09 820 0174
Penrose 667 Great South Road P 09 579 5605 F 09 571 0508
Manukau 32 Ormiston Road, East Tamaki P 09 273 3053 F 09 273 3483
Pukekohe 26 Nelson Street P 09 237 1274 F 09 238 1950
Hamilton 256 Maeroa Road P 07 847 3193 F 07 847 2166
Tauranga 84–86 Newton Street P 07 571 6955 F 07 571 7028
Rotorua 39–41 Depot Street P 07 348 9394 F 07 348 0371
Taupo 105 Tauhara Street P 07 378 9915 F 07 378 3471
Te Kuiti 9 Waitete Road P 07 878 8326 F 07 878 3082
Palmerston North 847 Tremaine Avenue P 06 357 2638 F 06 357 2142
New Plymouth 5a Struthers Place P 06 759 8157 F 06 759 8175
Hastings 1318 Omahu Road P 06 879 8989 F 06 879 8987
Masterton 8 Solway Crescent P 06 377 4474 F 06 377 4639
Kapiti Paraparaumu 7 Birmingham Street P 04 296 1125 F 04 297 2413
Petone 33 Bouverie Street P 04 568 0933 F 04 568 0935
Kaiwharawhara 119–125 Old Hutt Road P 04 472 4172 F 04 472 4314
Nelson 17 Elms Street P 03 543 8330 F 03 543 8333
Blenheim 51 Main Street P 03 579 1332 F 03 579 1318
Amberley 200 Carters Road P 03 314 8455 F 03 314 9060
Hornby 58 Hickory Place, Hornby P 03 344 3500 F 03 344 3505
Bromley 145 Maces Rd, Bromley P 03 376 4185 F 03 376 4087
Waimakariri 2 Wrights Rd, Kaiapoi P 03 327 5820 F 03 327 5823
Greymouth 6 Hinau Crescent, Kaiata Park P 03 768 4880
Branches South Island
Oamaru 15 Tees Street P 03 433 1094 F 03 434 3063
Dunedin Unit 1, 4 Strathallan Street P 03 456 1577 F 03 455 1577
Timaru 97-101 Hilton Hwy P 03 683 9062 F 03 688 2015
Cromwell 25 McNulty Rd P 03 445 4760 F 03 445 4764
Winton 207 Great North Road P 03 236 6044 F 03 236 6045
Invercargill 205 Bond Street P 03 214 6470 F 03 214 6473
Lower
Upper
Capital
Central
Northern
Capital Region
Central Region
Upper South Island
Australia
Lower South Island
Hynds Sales Branch
Hynds Factory
Northern Region
8
9
10
1 Hygrade Products Limited
2 Hynds Environmental
3 Ordish & Stevens
4 Waters & Farr
5 PPI Christchurch
6 Waters & Farr
7 Gillies MetalTech
8 Hygrade Water Austraila
9 Hygrade Water Austraila
10 Hygrade Water Austraila
The Hynds Group of Companies
Sub Company
Hamilton
Te Kuiti
Kapiti
Porirua 4
Taupo
Tauranga
Hastings
Brisbane
Sydney
Masterton
Petone
Blenheim
Cromwell
Timaru
Winton
Invercargill
Dunedin
NelsonKaiwharawhara
Rotorua
New Plymouth
Melbourne
Palmerston North
Oamaru
3
7#
Auckland
Christchurch
Greymouth
Amberley
Rangiora BromleyWaimakariri
Hornby6
5
Pukekohe
Warkworth
Manukau
Avondale
Albany
Penrose1
East Tamaki2
Whangarei
HYNDS STREETWARE PRODUCT CATALOGUE
Issue: March 2016