process , component and industrial heaters
TRANSCRIPT
![Page 1: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/1.jpg)
Industrial Heaters
![Page 2: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/2.jpg)
Basics of Heater
• Based on the principle of electric resistance
heating
• Electric current is passed through highly
resistive material (heating element)
• Heat produced due to I2R losses in the element
is transmitted to the medium to be heated.
• Called as Joule heating, Resistive heating or
Ohmic heating.
![Page 3: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/3.jpg)
• Mode of heat transfer is conduction, convection or radiation.
• 100% efficient
Contd.
![Page 4: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/4.jpg)
Ohm’s Law
![Page 5: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/5.jpg)
Circuit
• A series circuit has two or more heaters connected end-to-end.
Total Rt = R1+R2+R3+R4
• A parallel circuit has two or more heaters strung together end-to-end.
Total Rt = 1/R1+1/R2+1/R3+1/R4
![Page 6: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/6.jpg)
Power Supply
The circuit can be created by:• Single phase supply : 2 wires are used; one for
power and the other one for neutral
• Three phase supply : 2 types of connection
• Delta connection : 3 wires are used; R, Y and B.
• Star connection : 4 wires are used; R, Y, B and neutral.
![Page 7: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/7.jpg)
Heating Element Material
Different materials depending upon the temperature, medium and application.
• Nichrome alloy
• Ferritic alloys
• MoSi2 alloys
• SiC alloys
![Page 8: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/8.jpg)
Nichrome Alloy
![Page 9: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/9.jpg)
Ferritic Alloy
![Page 10: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/10.jpg)
MoSi2 Alloy
• Consist of MoSi2 and a SiO2 phase. At high temperatures, a protecting layer of SiO2 is formed on the surface.
Furnace atmosphere Max temperature °C (F)Air
1700 (3090)Nitrogen 1600 (2910)
Argon, Helium 1600 (2910)Dry hydrogen, dewpoint -80°C (-86 F) 1150 (2100)Moist hydrogen, dewpoint 20°C (68 F) 1450 (2640)Endgas (e.g. 40% N2, 40% H2, 20% CO) 1400 (2550)Cracked and partially burnt ammonia 1400 (2550)
![Page 11: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/11.jpg)
SiC Alloy
• Silicon carbide (SiC) electric heating
elements for element temperatures
up to 1625°C (2927°F).
• Capable of high power output, and
may be mounted either vertically or
horizontally.
![Page 12: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/12.jpg)
Heater Types
Component Heaters
• Used for Component Heating such as
Plastic Packaging, Plastic Extrusion,
Plastic Forming, Surface heating
through conduction/convection
Process Heaters
• Used for Process Heating such as
Immersion Heating of Liquids/
Gases/Solids, Furnace Heating,
Reduction, Oxidation and carburization
of Sulphur, Nitrogen, Air and other
gases.
![Page 13: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/13.jpg)
Component Heaters• Component Heaters are used in various industries for thermal heating of
components in the machine or the plant.
• Highly reliable and Energy efficient with uniform heating.
• Fast heating with long, trouble free service life.
• Unique shapes and design for customized heating.
![Page 14: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/14.jpg)
Cartridge Heaters
• High watt Density
• Cylindrical shaped, heavy-duty heating
element.
• Provides compact, insert type heating.
• Distinguished for long, trouble free
service and fast heating.
![Page 15: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/15.jpg)
Silicon Rubber Heaters
• Also known as flexible heaters.
• Rugged, moisture and chemical resistant
• Flame retardant, high dielectric strength
and non toxic
• Improve heat transfer, speed warm ups
and reduce wattage requirement.
![Page 16: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/16.jpg)
Strip Heater
• Outstanding industrial heating element that
can meet any budget.
• Durable, versatile and easy to control
• Uniform heat distribution
• Corrosion and vibration resistant
![Page 17: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/17.jpg)
Finned Strip Heater
• Fins improve heat transfer in free or
forced air heating applications.
• Fins can be in rectangular or round shape.
• Lower sheath temperature and
maximized element life through fins.
![Page 18: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/18.jpg)
Ceramic Band Heater
• Medium to high temperature heaters
• Thermal insulation layer reduces heat
loss and power consumption
• Flexible with versatile configurations
• No risk of failure due to Hot Spotting
![Page 19: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/19.jpg)
Mica Band Heater
• Mica provides exceptional insulation,
dielectric strength and heat transfer
capability
• Efficient heating solution for external
indirect heating
• Terminal boxes protect termination as
well as provide the option of
temperature control
![Page 20: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/20.jpg)
Duct Heater
• Mainly Three types: Open coil,
tubular or finned tubular heating
elements
• Quick response time, energy efficient
and easily adaptable
• Replaceable elements permits easy
service and reduced downtime
![Page 21: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/21.jpg)
Process Heater
• Process Heaters are used in various industrial applications to heat medium
(solid, liquid or gas)
• Tailored to meet customer’s unique needs.
• Engineered to provide precise process temperature control with control
equipment.
• Easily adaptable for every industrial process.
• Smart industrial heating solutions for process control
![Page 22: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/22.jpg)
Tubular Heater
• Versatile, rugged and dependable
• Factory-configured to suit a variety of
industrial heating applications
• Regarded as the foundation of all
heating elements
![Page 23: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/23.jpg)
Finned Tubular Heater
• Fins increase surface area, permits
faster heat transfer and puts more
power in tighter spaces.
• Mechanically bonded fins prevent
vibration at high velocities
• Extremely rugged, negligible
maintenance
• Adaptable to every industrial
environment
![Page 24: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/24.jpg)
Flanged Immersion Heater
• Wide customization, easier installation
and operations in stringent environment.
• Heating chemical, petroleum and water
based applications specially heat transfer
fluids, medium and lightweight oils.
• Mounting flange to provide support
• Heating elements to heat medium
• Thermowell and thermostats for
temperature sensing and controlling.
![Page 25: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/25.jpg)
Screw Plug Heater
• Used as a direct heating element, they are ideal for heating gases and liquids in tanks or vessels, process water heating, oils and heat transfer process, heating up flammable liquids or gases which require explosion proof housing.
• Extremely useful for the purpose of steam generation.
• Energy efficient and easy to regulate. The installation is a snap and the maintenance is easy as well.
• Mounting bushing to provide support• Heating elements to heat medium• Terminal Housing for holding terminals of power
supply• Thermowell and thermostats for temperature
sensing and controlling.
![Page 26: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/26.jpg)
Circulation Heater• Also known as inline heaters
• It is an immersion heater covered by an
anti-corrosion metallic vessel chamber.
• Accompanied by National Pipe Thread
(NPT) screw plug or ANSI flange heater
assemblies mated with a pressure
vessel.
• Vessel is mainly used to provide
insulation to prevent heat loss in the
circulation system.
• Thermal simulation at any stage of
design to check compatibility.
![Page 27: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/27.jpg)
Circulation Heater
![Page 28: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/28.jpg)
Over The Side Heater
• Installed in the upper portion of tanks where side heating is not available.
• The substance to be heated is either below the industrial tank heater or onto one side.
• Ample space is left in the tank for other operations to take place
• The heater can easily be removed when the required temperature is achieved within the substance.
• Terminal Enclosure• Heating elements• Legs for spacing between floor and heater• Thermowell and thermostats• For acidic application; quartz, titanium or other
special outer tubes
![Page 29: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/29.jpg)
Bundle Rod Heater
• Consists of circular ceramic beads that hold the heating elements
• Also known as Tubothal Heating elements or Bayonet Heaters
• Designed for long life and maintenance free operation.
• In combination with the radiant tubes, a system is created which delivers high power, is rugged and versatile
• Ceramic Disc which consists of through-penetrating holes encompassing the heating elements.
• Fiber Disc which holds the terminal rod and the center rod.
![Page 30: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/30.jpg)
Open Coil Heater
• Have open circuits consisting of coiled
resistance wire fixed onto a supporting
element that heat the medium directly.
• Most efficient and versatile while also the
most economically feasible solution for
heating.
• Fast heat up times that improve efficiency
and have been designed for low
maintenance and inexpensive replacement
parts.
![Page 31: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/31.jpg)
Bobbin Heater
• Made with sheathed or without sheathed
material.
• Offers a large surface area to heat liquids
or semi-solid materials such as water, oil,
wax, fats, and bitumen.
• Used for direct heating of air and indirect
heating of liquids and gases.
• Easy replacement
![Page 32: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/32.jpg)
Infrared Heater
• Specially designed to emit infrared heat,
where heating by other means is not ideal.
• High intensity heaters used where high
temperatures are necessary.
• Simple, easy to clean, cost effective and
efficient.
• Categorized as the most useful heaters.
• Designed to work in large and exposed
areas and heavy duty projects.
![Page 33: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/33.jpg)
Edge wound Heater
• Used where utmost power is
required in limited space.
• Easy to install and replace.
• Horizontal or vertical mounting.
![Page 34: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/34.jpg)
Applications
• From chemicals, water, oil, liquids, petrochemicals to aluminum, steel,
power, pharmaceuticals, automobile, rubber and plastic industry,
industrial heaters are used everywhere.
• Every industry requires a specific industrial heater depending on the
process
• Modern industrial infrastructure are in an inevitable need of innovative
heating technology for sustainable development.
![Page 35: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/35.jpg)
Steel Industry• Immersion heaters are used in hot dip galvanizing
process
• Radiant tubes and bundle rod heaters are used in
galvanizing furnaces
• Duct heaters are used for Air separation plant
(Oxygen plant) in steel melting
• Radiant tubes are used in ammonia cracking
generators to be used for annealing of steel .
![Page 36: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/36.jpg)
Steel Industry Focus
• Galvanizing & Galvalume Plant: Bundle Rod Heater & Edge Wound Heater
• Oxygen Plant: Tubular Immersion Heater & Air Duct Heater
![Page 37: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/37.jpg)
Power Generation
• Flanged Immersion heaters
are used for process water
applications
• Duct heaters are used for
heating air for combustion
![Page 38: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/38.jpg)
Aluminum Industry
• Radiant tubes for primary aluminum
production
• Open coil duct heaters for heating air
• Radiant tubes and bundle rod heaters for
secondary aluminum processing
![Page 39: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/39.jpg)
Aluminum Industry Focus
• Cast House: Holding, Melting Furnace & homogenizing Furnace :Bundle Rod
Heater (Accessories Radiant Tube, U Hanger & Swing Hanger), Edge Wound
Heater, Silicon Carbide Heater
• Sow Caster: Preheating of sow caster application : Molybdenum Disilicide
(MoSi2) Heating Elements
• Green Anode Plant: HTM oil heating Application : Tubular Immersion Heater
![Page 40: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/40.jpg)
Chemical Industry
• Processing chemical mixtures requires heating elements to allow for even flow
heat transfers along an entire area.
• Immersion heaters are used to apply a gradual heat within the container.
• Flanged heaters are used for lower watt densities.
• Screw plug heaters are used for ease of use and maintenance.
• Over the side heaters are used where access opening is not provided at bottom
of tank.
![Page 41: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/41.jpg)
Chemical Industry
![Page 42: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/42.jpg)
Oil & Gas Industry
• High temperatures are desired in petrochemicals in order to maintain its viscosity
in external environments as well process applications.
• Heaters support original equipment manufacturers (OEMs), after-treatment
system integrators, retrofitters of over-the-road, medium and heavy-duty
vehicles, and off-road construction.
• Integrated with application-specific sensors, controllers, control panels and heater
components, it is an ideal solution for processing oil and gas.
![Page 43: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/43.jpg)
Oil & Gas Industry
![Page 44: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/44.jpg)
• Big Tank Heaters
• Ammonia crackers
• Air Duct Heating
Heaters used: Tubular Heater, Immersion Heater
Oil & Gas Industry Focus
![Page 45: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/45.jpg)
Automobile Industry
• Metal melting furnace and Tempering furnace are widely used in the
manufacturing of automobiles. Hardening and tempering are normally used to
improve the wear resistance, strength and toughness of the component. Industrial
heaters have wide application in these furnaces.
• Cartridge, tubular, and silicone laminate heaters for engine manifold and crankcase
preheating, emissions controls component exhaust air heating, and urea tank
heating (selective catalyst reduction); thick film heaters for a variety of preheat
applications and supply lines.
![Page 46: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/46.jpg)
Automobile Industry
![Page 47: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/47.jpg)
• Carburizing Process
• Heat treatment Process
• Hardening
• Nitriding
• Annealing
Heaters used: Bundle Rod Heater, Bobbin Heater
Automobile Industry Focus
![Page 48: Process , Component and Industrial heaters](https://reader035.vdocuments.us/reader035/viewer/2022062412/58abc0a91a28ab04618b6809/html5/thumbnails/48.jpg)
THANK YOU!
Tempsens Instruments (I) Pvt. Ltd.B-188 A, Road No. 5, MIA, Madri Udaipur - 313 003 (Rajasthan) INDIAPhone : +91-294-3057700Fax : +91-294-3057750E-mail : [email protected] : www.tempsens.com
ENGINEERED SOLUTIONS FOR HEATING & SENSING