pro-tec awning systems

64', 70' TRUSS WALL BUILDING

36' PONY WALL SINGLE TUBE BUILDING 36' PONY WALL TRUSS BUILDING

PRO-TEC AWNING SYSTEMS

MANUAL NO. 187297

/ 08/31/2009REV B/MRS 8/8/17 ECN 17-141

42', 56' TRUSS WALL BUILDING

42', 56', 64', 70' PONY WALL TRUSS BUILDING

Dear Sentry Building Owner, We would like to take this opportunity to thank you for purchasing a SIOUX STEEL PRO-TEC BUILDING . We believe that it will serve you well for many years. The framework uses quality certified structural grade steel tubing. All welded rafter assemblies are powder coated or hot-dipped galvanized to provide maximum corrosion protection. We believe in providing QUALITY, RELIABILITY, DURABILITY, VERSATILITY , and COMMITMENT to meet the needs of our customer. Should you have any questions or comments during or following the installation, please feel free to call your SIOUX STEEL PRO-TEC BUILDING dealer or manufacturer. We will be glad to assist you in any way we can.

IMPORTANT Improper Site Preparation, Assembly and Maintenance may invalidate warranty and cause unnecessary and costly mistakes.

READ MANUAL FIRST

If you have any questions contact Sioux Steel Co. at 1-800-557-4689

Procedure For Viewing Sentry Manuals On-Line: • Log on to siouxsteel.com.

• Select Dealer Login in upper right hand corner.

• Enter Username, Password and select Submit.

If you don’t have a username and password, contact your dealer or

Sioux Steel Company Customer Service at 1-800-557-4689.

• Select the Engineering Manuals folder in the center of the screen.

• Select the ProTec Manuals folder.

• Select the Sentry folder.

• Based on manual description select the desired manual you wish to open, view

and/or print.

• A second tab will open up with a PDF file of the desired manual.

• If you wish to print the manual, select the printer icon in the upper left hand

corner.

GENERAL INFORMATION

Foundation for Sentry Building: In all cases, the soil and foundation must be sufficiently stable and deemed suitable to support the forces produced by the structure. It is recommended that the customer consult a quali fied engineer to certify the soil conditions and foundat ion design for their location. Soil and foundation must be able to withstand forces which meet or exceed the structural forces. Contact Sioux Steel Company or your dealer for building specific structural forces. Site Conditions for Sentry Building: The installation site must be sufficiently level to permit uniform wall assembly on a support foundation. In all cases, the area surrounding the Sentry Building must provide sufficient drainage to prevent soil erosion around the foundation. The structure has been designed to meet 90 mph exposure C wind load and 30, 40, and 50 psf (16', 12', & 10' rafter spacing respectively) ground snow load , for open terrain with obstructions having heights generally less than 30 feet. This terrain must extend upwind for a distance greater than 2600 feet. The building must be positioned at least 20 feet away from existing structures with a higher eave to prevent excessive load from drifting snow. Contact your insurance agent prior to assembly to i nsure you are covered in case of inadvertent accidents that may occur during erectio n. NOTE: Sioux Steel Company is not responsible o r liable for:

- Any damage or failure that may occur due to i ncorrect erection of building. - Any soil analysis or foundation design, - Substitution of components not specified in t he construction manual that lead to damage or failure. - Unstable soil conditions or foundation that l ead to structure damage or failure. - Damage caused by leaning sidewalls . - Any modification of design or structure. - Any bodily injury that occurs during the asse mbly of the building or as a result of modification to the design or impr oper construction. - Caustic or corrosive environments that lead t o structure deterioration, damage or failure. - See warranty in structure manual.

REF - RAFTER TUBE

7

3

4

5

8

3

3

3

2

4

6

6

REF - POST

1

AWNING FRAME PARTS LISTING36' PW SINGLE TUBE BUILDING

ITEM NUMBER DESCRIPTION QTY

1 179947GRY AWNING END TUBE, LH 1

2 179948GRY AWNING END TUBE, RH 1

3 179720GRY AWNING CENTER TUBE VAR

4 179758GRY EAVE SWAGED END TUBE 2

5 172328GRY EAVE DOUBLE SLIP TUBE 1

6 172329GRY EAVE SINGLE SLIP TUBE VAR

7 177962GRY LOWER TUBE VAR

8 177964GRY LOWER BRACE TUBE VAR

2

172329GRYEAVE- SINGLE SLIP TUBE

179947GRYEND TUBE, LH

177964GRYLOWER BRACE

AWNING COMPONENTS36' PONY WALL SINGLE TUBE BUILDING

179948GRYEND TUBE, RH

179758GRYEAVE- SWAGED END TUBE

177962GRYLOWER TUBE

179720GRYCENTER TUBE

172328GRYEAVE- DOUBLE SLIP TUBE

3

154029BOLT, 3/8" X 3-1/2"

AWNING COMPONENTS36' PONY WALL SINGLE TUBE BUILDING

169706BOLT, 3/8" X 1-1/2"

154051HEX NUT, 3/8"

167834LAGSCREW, 5/16" X 3"

187299DRILL SCREW, 1/4" X 3/4"

4

27-1/2

these holesshown and alignPosition parts as

Use (8) 5/16 x 3 lag boltsat each post

27-1/2


Position parts asshown and alignthese holes

Right End Post Detail

Left End Post Detail

Center Post Detail

Attach the 177962GRY Lower Tubes to posts as shown below using (4) 167834 5/16 x 3 lag bolts.Note the brace positions for each post location.

Attach the 177964GRY Lower Braces to the posts by aligning the single hole with thelower tube and attching its mount plate to the posts using (4) 167834 5/16 x 3 lag bolts.

INSTALLATION OF BRACE TUBES36' PONY WALL SINGLE TUBE BUILDING

27-1/2

these holesshown and alignPosition partsas


5

frame members

10' Center toCenter for awning

Install the Lower Tubes and Lower Braces on every other post per the diagramson the preceeding page. The spacing of the Awning frame members is 10' on centers.

BRACE TUBE INSTALLATIONOVERALL VIEW

36' PONY WALL SINGLE TUBE BUILDING

6

179947GRY

179948GRY

are installed

Leave this connectionloose untill the slide tubes

179720GRY

Attach 179947GRY End Tube, LH to the Brace Tubes using 3/8 x 1-1/2 bolts and nuts.Attach the other end to the rafter tubes by drilling a 7/16 dia hole (use the Awning tube bracketas a guide) and secure with 3/8 x 3-1/2 bolts and nuts.

Attach 179720GRY Center Tubes to the Brace Tubes using 3/8 x 1-1/2 bolts and nuts.Attach the other end to the rafter tubes by drilling a 7/16 dia hole (use the Awning tube bracketas a guide) and secure with 3/8 x 3-1/2 bolts and nuts.

Attach 179948GRY End Tube, RH to the Brace Tubes using 3/8 x 1-1/2 bolts and nuts.Attach the other end to the rafter tubes by drilling a 7/16 dia hole (use the Awning tube bracketas a guide) and secure with 3/8 x 3-1/2 bolts and nuts.After this End Tube is attached to the rafter tube, remove the bolt from the brace connectionuntill the Eave Swaged End Tube has been installed.

MAIN AWNING TUBES INSTALLATION36' PONY WALL SINGLE TUBE BUILDING

Secure the End Tubes, Lower Tubes, and Lower Braces with 3/8 x 1-1/2 boltsand nuts.

at the second hole.

Preferred

Drill a 7/16 hole throughthe rafter tube and securewith 3/8 x 3-1/2 bolts andnuts.

An alternate method would be tosecure with 3/8 x 3-1/2 bolts and nuts

Alternate

7

Install one end of 179758GRY Eave- Swaged Slip Tube into the 179947GRY Awning End Tube, LH.The opposite end slides into 172328GRY Eave- Double Slip Tube. Slide the bungs of the DoubleSlip Tubes into 179720GRY Awning Center Tubes. These parts are held in place with 187299 1/4 x 3/4 Drill Screws. Make sure to install the drill screws from the lower side of Awning tubes tokeep their heads away from the building cover.

Next slide 172329GRY Eave- Single Slip Tubes into the remaining Eave Tubes and the remaining Awning Center Tubes and secure with the Drill Screws as before.

The last section is completed by inserting another 179758GRY Eave- Swaged Slip Tube betweenthe final Eave- Single Slip Tube and 179948 Awning End Tube, RH. Reinstall the 3/8 x 1-1/2 boltand nut at the last Brace Tubes and secure the last Slip Tube with Drill Screws as before.

AWNING SLIP TUBE INSTALLATION36' PONY WALL SINGLE TUBE BUILDING

172329GRY

179947GRY

Installed Last

179948GRY

179758GRY

179758GRY

after last Slip Tube is installed.

172328GRY

172329GRY

Reinstall this 3/8 x 1-1/2 bolt and nut

179720GRY

8

AWNING PACKAGES - CURVED ENDS

LENGTH 36' SINGLE TUBE BLDGS 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260

PART # 179759-(LENGTH) X X X X X X X X X X

PART # DESCRIPTION QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY QTY

179947GRY AWNING END TUBE LH 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

179948GRY AWNING END TUBE RH 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

179720GRY UPPER AWNING CORD 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

177962GRY LOWER TUBE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

177964GRY LOWER BRACE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

172328GRY DOUBLE SLIP TUBE 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

172329GRY SINGLE SLIP TUBE 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

179758GRY END SWAGED TUBE 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

154029 3/8"x3.5" BOLT 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

169706 3/8"x1.5" BOLT 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

154051 3/8" NUT 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55

187299 1/4"x3/4" DRILL SCREW 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53

167834 5/16" x 3" LAG SCREWS 33 42 50 58 66 75 83 91 99 108 116 124 132 141 149 157 165 174 182 190 198 206 215 223

167642 2 GALLON PAIL 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

167644 2/4 GALLON LID 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

173803 DECAL 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

9

4

REF - POST

1

3

3

3

3

7

8

4

5

6

6

REF - RAFTER

AWNING FRAME PARTS LISTING36' PONY WALL TRUSS BUILDING





4 179758GRY END SWAGED TUBE 2

5 172328GRY DOUBLE SLIP TUBE 1

6 172329GRY SINGLE SLIP TUBE VAR

7 177962GRY LOWER TUBE VAR


11


180816GRYAWNING CENTER TUBE


177962GRYLOWER TUBE

179948GRYAWNING END TUBE, RH


AWNING COMPONENTS36' PONY WALL TRUSS BUILDING

177964GRYLOWER BRACE

179947GRYAWNING END TUBE, LH

12

154051HEX NUT, 3/8"

167834LAGSCREW, 5/16" X 3"

187299DRILL SCREW, 1/4" X 3/4"

154025BOLT, 3/8" X 2-1/2"

154029BOLT, 3/8" X 3-1/2"

AWNING COMPONENTS36' PONY WALL TRUSS BUILDING

169706BOLT, 3/8" X 1-1/2"

13

Left End Post Detail

Attach the 177964GRY Lower Braces to the posts by aligning the single hole with the

Note the brace positions for each post location.

lower tube and attching its mount plate to the posts using (4) 167834 5/16 x 3 lag bolts.

Right End Post Detail

Center Post Detail

Attach the 177962GRY Lower Tubes to posts as shown below using (4) 167834 5/16 x 3 lag bolts.

INSTALLATION OF BRACE TUBES36' PONY WALL TRUSS BUILDING

27-1/2 shown and alignthese holes

Position partsas


27-1/2

these holesshown and alignPosition parts as


27-1/2

at each postUse (8) 5/16 x 3 lag bolts

Position parts asshown and alignthese holes

14

BRACE TUBE INSTALLATIONOVERALL VIEW

36' PONY WALL TRUSS BUILDING

Install the Lower Tubes and Lower Braces on every other post per the diagramson the preceeding page. The spacing of the Awning frame members is 10' on centers.

frame members

10' Center toCenter for awning

15

At the Center Tubes,drill a 7/16 hole throughthe Rafter Tube and securewith 3/8 x 2-1/2 bolts andnuts.

179947GRY

180816GRY

1179948GRY

Leave this connectionloose untill the slide tubesare installed.

Attach 179947GRY End Tube, LH to the Brace Tubes using 3/8 x 1-1/2 bolts and nuts.Attach the other end to the rafter tubes by drilling a 7/16 dia hole (use the Awning tube bracketas a guide) and secure with 3/8 x 3-1/2 bolts and nuts.

Attach 180816GRY Center Tubes to the Brace Tubes using 3/8 x 1-1/2 bolts and nuts.Attach the other end to the rafter tubes by drilling a 7/16 dia hole (use the Awning tube bracketas a guide) and secure with 3/8 x 2-1/2 bolts and nuts.

Attach 179948GRY End Tube, RH to the Brace Tubes using 3/8 x 1-1/2 bolts and nuts.Attach the other end to the rafter tubes by drilling a 7/16 dia hole (use the Awning tube bracketas a guide) and secure with 3/8 x 3-1/2 bolts and nuts.After this End Tube is attached to the rafter tube, remove the bolt from the brace connectionuntill the Eave Swaged End Tube has been installed.

MAIN AWNING TUBES INSTALLATION36' PONY WALL TRUSS BUILDING

Secure the End Tubes, Lower Tubes,and Lower Braces with 3/8 x 1-1/2 boltsand nuts.

At the End Tubes (LH & RH),drill a 7/16 hole throughthe Rafter Tube and securewith 3/8 x 3-1/2 bolts andnuts.

16

Install one end of 179758GRY Eave- Swaged Slip Tube into the 179947GRY Awning End Tube, LH.The opposite end slides into 172328GRY Eave- Double Slip Tube. Slide the bungs of the DoubleSlip Tubes into 180816GRY Awning Center Tubes. These parts are held in place with 187299 1/4 x 3/4 Drill Screws. Make sure to install the drill screws from the lower side of Awning tubes tokeep their heads away from the building cover.

Next slide 172329GRY Eave- Single Slip Tubes into the remaining Eave Tubes and the remaining Awning Center Tubes and secure with the Drill Screws as before.

The last section is completed by inserting another 179758GRY Eave- Swaged Slip Tube betweenthe final Eave- Single Slip Tube and 179948GRY Awning End Tube, RH. Reinstall the 3/8 x 1-1/2 boltand nut at the last Brace Tubes and secure the last Slip Tube with Drill Screws as before.

AWNING SLIP TUBE INSTALLATION36' PONY WALL TRUSS BUILDING

172328GRY

172329GRY172329GRY

179948GRY

179758GRY

Installed Last

179947GRY

179758GRY

180816GRY

Reinstall this 3/8 x 1-1/2 bolt and nutafter last Slip Tube is installed.

17


LENGTH 36'PW TRUSS BLDGS 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260

PART # 180827-(LENGTH) X X X X X X X X X X X X X X X X X X X X X X X X





177962GRY LOWER TUBE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

177964GRY LOWER BRACE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27




154025 3/8"x2.5" BOLT 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

154029 3/8"x3.5" BOLT 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

169706 3/8"x1.5" BOLT 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

154051 3/8" NUT 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55

187299 1/4"x3/4" DRILL SCREW 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53

167834 5/16" x 3" LAG SCREWS 33 42 50 58 66 75 83 91 99 108 116 124 132 141 149 157 165 174 182 190 198 206 215 223

167642 2 GALLON PAIL 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

167644 2/4 GALLON LID 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

173803 DECAL 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

18

AWNING FRAME PARTS LISTING42', 56', 64', 70' PONY WALL BUILDING

9

7

REF - RAFTER

REF - POST

1

3

3

3

3

2

4

5

6

6

4

7

7

7

7

8

7









8 161125 STRAIGHT TIE DOWN TUBE VAR

9 160972 SWAGED TIE DOWN TUBE VAR

20



172320GRYLOWER BRACE TUBE

160972SWAGED TIE DOWN TUBE

161125STRAIGHT TIE DOWN TUBE




AWNING COMPONENTS42', 56', 64'. 70' PONY WALL BUILDING


21

154051HEX NUT, 3/8"

167834LAGSCREW, 5/16" X 3"

187299DRILL SCREW, 1/4" X 3/4"

170052PLUG

154019BOLT, 3/8" X 1"

AWNING COMPONENTS42', 56', 64', 70' PONY WALL BUILDING

184651 - WINCH STRAP, 1" X 10'178169 - WINCH STRAP, 2" X 15'

161754 - RATCHET, 1"

154029BOLT, 3/8" X 3-1/2"

22

Secure End Tubes and CenterTubes with 3/8 x 1 bolts and nuts.

Attach the 172320GRY Lower Mount Tubes to each Corner by drilling a 7/16 hole and installing 3/8 x 3-1/2 bolts and nuts.Attach the Lower Mount Tubes to each 179947GRY, 179948GRY, and 179720GRY AwningTubes with 3/8 x 1 bolts and nuts.Attach the other end of the Awning Tubes to each Rafter by drilling a 7/16 hole in theRafter tubes and secure with 3/8 x 3-1/2 bolts and nuts.After the last Awning Tube is attached to the Rafter, remove the 3/8 x 1 bolt from theend connection until the Awning Slip Tubes are installed per the next step.

MAIN AWNING TUBES INSTALLATION42', 56', 64', 70' PONY WALL BUILDING

Drill a 7/16 hole through the MountTube and secure with a 3/8 x 3-1/2 boltand nut.

179948GRY

179947GRY

installed.

Leave this connection looseuntil the slide tubes are

179720GRY

Drill a 7/16 hole through theRafter Tube and secure witha 3/8 x 3-1/2 bolt and nut.

23

AWNING SLIP TUBE INSTALLATION42', 56', 64', 70' PONY WALL BUILDING

Install one end of 179758GRY Eave Swaged Slip Tube into the 179947GRY Awning End Tube, LH.The opposite end slides into 172328GRY Eave Double Slip Tube. Slide the bungs of the DoubleSlip Tubes into 179720GRY Awning Center Tubes. These parts are held in place with 1782991/4 x 3/4 Drill Screws. Make sure to install the drill screws from the lower side of Awning tubes tokeep their heads away from the building cover.

Next slide 172329GRY Eave Single Slip Tubes into the remaining Eave Tubes and the remainingAwning Center Tubes and secure with the Drill Screws as before.

The last section is completed by inserting another 179758GRY Eave Swaged Slip Tube betweenthe final Eave Single Slip Tube and 179948GRy Awning End Tube, RH. Reinstall the 3/8 x 1 boltand nut at the last Brace Tube and secure the last Slip Tube with Drill Screws as before.

179947GRY

179720GRY

179758GRY

172328GRY

172329GRY

Installed Last

172329GRY

179758GRY

after last Slip Tube is installed.Reinstall this 3/8 x 1 bolt and nut

179948GRY

24


LENGTH 42'/56'/64'/70' PW BLDGS 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260

PART # 179760-(LENGTH) X X X





172320GRY LOWER TUBE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27




161125 1.29 x 122" TIE DOWN 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

160972 1.29" x 10' SWAGE TUBE 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

154029 3/8"x3.5" BOLT 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55

154019 3/8"x1.0" BOLT 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

154051 3/8" NUT 13 16 19 22 25 28 31 34 37 40 43 46 49 52 55 58 61 64 67 70 73 76 79 82

187299 1/4"x3/4" DRILL SCREW 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53

161754 RATCHET 1'' W/HANDLE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

184651 STRAP- 1'' X 10FT GREY 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

167642 2 GALLON PAIL 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

167644 2/4 GALLON LID 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

173803 DECAL 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

170052 1.29" PLUG 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

178169 2" X 15' TIE DOWN STRAP 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

25

7

3

7

7

7

1

3

3

2

4

4

7

6

6

5

37

REF - RAFTER

REF - LEG

AWNING FRAME PARTS LISTING42', 56' TRUSS WALL BUILDING









27




AWNING COMPONENTS42', 56' TRUSS WALL BUILDING




172320GRYLOWER BRACE TUBE

28

187299DRILL SCREW, 1/4" X 3/4"

161754 - RATCHET, 1"

154051HEX NUT, 3/8"

154029BOLT, 3/8" X 3-1/2"

167834LAGSCREW, 5/16" X 3"

154019BOLT, 3/8" X 1"

42', 56 TRUSS WALL BUILDINGAWNING COMPONENTS


29

179948GRY

179947GRY

179720GRY

Leave this connectionloose until the slidetubes are installed.

42', 56' TRUSS WALL BUILDINGMAIN AWNING TUBES INSTALLATION

Attach the 172320GRY Lower Mount Tubes to each Corner outer tube by drilling a 7/16 holeand secure with 3/8 x 3-1/2 bolts and nuts.Attach the Lower Mount Tubes to each 179947GRY, 179948GRY, and 179720GRY AwningTubes with 3/8 x 1 bolts and nuts.Attach the other end of the Awning Tubes to each Rafter upper tube by drilling a 7/16 holeand secure with 3/8 x 3-1/2 bolts and nuts.After the last Awning Tube is attached to the Rafter, remove the 3/8 x 1 bolt from the end connection until the Awning Slip Tubes are installed per the next step.

Secure End Tubes and CenterTubes to Lower Braces with 3/8 x 1 bolts and nuts.

with a 3/8 x 3-1/2 bolt and nut.

Drill a 7/16 hole through theCorner outer tube and secure

172320GRY

Drill a 7/16 hole throuighthe Rafter upper tube andsecure with a 3/8 x 3-1/2bolt and nut.

30

172328GRY

172329GRY172329GRY

179947GRY

179720GRY

179720GRY

179720GRY

179720GRY

179948GRY

179758GRY

179758GRY

AWNING SLIP TUBE INSTALLATION42', 56' TRUSS WALL BUILDING



The last section is completed by inserting another 179758GRY Eave Swaged Slip Tube betweenthe final Eave Single Slip Tube and 179948GRY Awning End Tube, RH. Reinstall the 3/8 x 1 boltand nut at the last Brace Tube and secure the last Slip Tube with Drill Screws as before.

31


LENGTH 42'/56' TW BLDGS 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260

PART # 180825-(LENGTH)





172320GRY LOWER TUBE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27




154029 3/8"x3.5" BOLT 9 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54

154019 3/8"x1.0" BOLT 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

154051 3/8" NUT 13 15 18 21 24 27 30 33 36 39 42 45 48 51 54 57 60 63 66 69 72 75 78 81

187299 1/4"x3/4" DRILL SCREW 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53

161754 RATCHET 1'' W/HANDLE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

184651 STRAP- 1'' X 10FT GREY 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

167642 2 GALLON PAIL 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

167644 2/4 GALLON LID 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

173803 DECAL 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

178169 2" X 15' TIE DOWN STRAP 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

32

REF - LEG

8

AWNING FRAME PARTS LISTING64', 70' TRUSS WALL BUILDING

1

2

3

3

3

3

4

5

6

6

4

7

7

7

7

7

REF - RAFTER

9









8 161125 STRAIGHT TIE DOWN TUBE VAR

9 160972 SWAGED TIE DOWN TUBE VAR

34




160972SWAGED TIE DOWN TUBE




161125STRAIGHT TIE DOWN TUBE

180645GRYLOWER BRACE TUBE172328GRY

EAVE- DOUBLE SLIP TUBE

35



170052PLUG

154019BOLT, 3/8" X 1"

167834LAGSCREW, 5/16" X 3"

154029BOLT, 3/8" X 3-1/2"

187299DRILL SCREW, 1/4" X 3/4"

154051HEX NUT, 3/8"

161754 - RATCHET, 1"

36

Secure End Tubes and CenterTubes to Lower Braces with3/8 x 1 bolts and nuts.

a 3/8 x 3-1/2 bolt and nut.

Drill a 7/16 hole through theRafter tube and secure with

180645GRY

179948GRY

179720GRY

are installed.

Leave this connectionloose until the slide tubes

179947GRY

Drill a 7/16 hole through theRafter upper tube and secure with a 3/8 x 3-1/2 boltand nut.

Attach the 180645GRY Lower Mount Tubes to each Rafter upper tube by drilling a 7/16 holeand secure with 3/8 x 3-1/2 bolts and nuts.Attach the Lower Mount Tubes to each 179947GRY, 179948GRY, and 179720GRY AwningTubes with 3/8 x 1 bolts and nuts.Attach the other end of the Awning Tubes to each Rafter upper tube by drilling a 7/16 holeand secure with 3/8 x 3-1/2 bolts and nuts.After the last Awning Tube is attached to the Rafter, remove the 3/8 x 1 bolt from the end connection until the Awning Slip Tubes are installed per the next step.

MAIN AWNING TUBES INSTALLATION64', 70' TRUSS WALL BUILDING

37

AWNING SLIP TUBE INSTALLATION64', 70' TRUSS WALL BUILDING



The last section is completed by inserting another 179758GRY Eave Swaged Slip Tube betweenthe final Eave Single Slip Tube and 179948GRy Awning End Tube, RH. Reinstall the 3/8 x 1 boltand nut at the last Brace Tube and secure the last Slip Tube with Drill Screws as before.

172329GRY

179758GRY

179947GRY

179948GRY

179720GRY

179758GRY

172328GRY

172329GRY

Reinstall this 3/8 x 1 bolt and nutafter last Slip Tube is installed.

38


LENGTH 64'/70' TW BLDGS 30' 40' 50' 60' 70' 80' 90' 100' 110' 120' 130' 140' 150' 160' 170' 180' 190' 200' 210' 220' 230' 240' 250' 260'

PART # 180826-(LENGTH)





180645GRY LOWER TUBE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27




161125 1.29 x 122" TIE DOWN 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

160972 1.29" x 10' SWAGE TUBE 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

154029 3/8"x3.5" BOLT 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55

154019 3/8"x1.0" BOLT 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

154051 3/8" NUT 13 16 19 22 25 28 31 34 37 40 43 46 49 52 55 58 61 64 67 70 73 76 79 82

187299 1/4"x3/4" DRILL SCREW 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53

161754 RATCHET 1'' W/HANDLE 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

184651 STRAP- 1'' X 10FT GREY 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

167642 2 GALLON PAIL 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

167644 2/4 GALLON LID 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

173803 DECAL 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

170052 1.29" PLUG 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2

178838 2" X 28' TIE DOWN STRAP 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

39

MAINTENANCE SCHEDULE

1. One Week Inspection a. The key visual indicator of adequate tension in the building fabric cover and end wall

panel is to ensure all creases and wrinkles in the fabric are removed. Check the ratchet straps for tightness and adjust as necessary. Refer to step 9 of cover installation manual for recommended torque settings for 1" and 2" ratchets.

b. Punctures in the fabric cover caused by accidental damage should be repaired

immediately. The fabric requires a product specific heat seam weld repair. Contact your local Sioux Steel Pro-Tec® building dealer or manufacturer to schedule service.

c. Ensure all tension cables are taut. Cables should not sag. Adjust turnbuckles as

necessary.

2. Installation Adjustment a. The building and end wall panels cover on your SIOUX PRO-TEC® Sentry Building

may relax after installation. It is critical to keep the cover taut (snug) over the rafters and end wall panels taut over end wall framing to prevent wear and ensure a long life. Tighten ratchets and adjust cables as required.

3. Annual Maintenance

a. Repeat 1 Week Inspection (listed above) a minimum of (4) times a year. b. Visually inspect each cross cable for signs of wear and check turnbuckle tension.

Replace and/ or tighten as necessary. c. Check all base plate anchor studs and nuts to assure they are tight. d. Check all ratchet mount and winch bolts and nuts to assure they are tight. e. Check for premature wear of fabric cover, especially where tension is applied and where

there is direct contact with the buildings steel frame. f. Check for premature deterioration of the corrosion protection on the building components.

NOTE: Building covers and end wall panels installed in cooler weather may relax more than covers installed in warm weather. Check tight ness on covers and end wall panels installed in cooler weather on the first available sunny day and adjust cables as necessary. Severe weather conditions may also affe ct your cover, check cover after such conditions occur.

NOTE: Failure to carry out above steps will invalid ate the warranty. WARNING: FLAMMABLE MATERIAL EXPOSURE TO ANY HEAT SOURCE FOR ANY LENGTH OF TIME COULD RESULT IN DAMAGE TO THE FABRIC COVER OR END PANEL MATERIAL. EXHAUST GA SES, SPACE HEATER, WELDING SPARKS, ETC. SHOULD NOT BE ALLOWED TO GET NEAR THE FABRIC PORTION OF STRUCTURE. SIOUX STEEL COMPANY WILL NOT BE RESPONS IBLE FOR ANY DAMAGES OR LIABILITIES RESULTING FROM FAILURE TO HEED THIS WAR NING. THE COVER OR END PANEL MATERIAL STARTS TO DETERIORATE AT EXPOSURE TO 180° TEMPERATURE FOR ANY LENGTH OF TIME. PREVENT PROLONGED CONTACT FROM ANY HEAT SOURCE TO ENSURE MAXIMUM PROTECTION TO THIS MATERIAL. FOR ANY FURTH ER INFORMATION CONTACT SIOUX STEEL COMPANY.

Revised 07/14/2017

NEW PRODUCT WARRANTY PRO-TEC BUILDINGS

LIMITED WARRANTY FOR NEW SIOUX STEEL COMPANY PRODUCTS A. GENERAL PROVISIONS . “Sioux Steel” means Sioux Steel Company, 196 1/2 East Sixth Street, Sioux Falls, South Dakota 57104. The warranties described below are provided by Sioux Steel to the original purchasers of new products purchased from Sioux Steel or from an authorized Sioux Steel Dealer (the “Products”). Under these warranties, Sioux Steel will, at its option, repair or replace at its factory any Product covered under these warranties which is found to be defective in material and workmanship during the applicable warranty term or refund the purchase price paid for the defective Product. Customer will be responsible for labor charges for removing the defective Product and reinstalling the repaired or replacement Product, any premium charge for overtime labor requested of Sioux Steel and shipping charges to and from Sioux Steel’s factory. These warranties are not transferrable . B. WARRANTY PERIOD . Subject to exclusions and limitations set forth herein, each new Product is warranted for the number of years specified below. Each warranty term begins from the date of purchase regardless of delay in receipt of the Product by Customer due to the time required to process, handle, ship, assemble, construct and install the Product. Customer must retain proof of the date of purchase. Replacement parts for and repairs to the Product will be warranted only for the remainder of the original warranty term. The replacement parts for or repairs to the Product will not extend the warranty term beyond the original warranty term. Products described below include all parts, components and accessories.

PROTEC BUILDINGS Pro-Tec Poultry Buildings 1 Year Safeguard Livestock Shade 1 Year Pro-Tec Single Tube (24’, 30’, and 36’) Buildings 3 Years All Other Powder-Coated Pro-Tec Buildings in Livestock (other than Poultry) and Chemical Storage Applications 7 Years, Prorated Monthly All Other Powder-Coated Pro-Tec Buildings Except those in Livestock and Chemical Storage Applications 15 Years, Prorated Monthly All Other Hot-Dip Galvanized Pro-Tec Buildings 15 Years, Prorated Monthly Fabricated Tarp Materials (covers) 15 Years, Prorated Monthly Fabricated Tarp Materials for End Panels (All Pro-Tec Buildings) ; Rollup Sides; Curtains and Doors; Track Doors; Quarter Panels and Half Moon End Panels ( On all Building Models)

3 Years, Prorated Monthly

Proration credit will be given toward the purchase price for the replacement of fabric and tarp materials, based on Sioux Steel’s current price list at the time the warranty claim is made.

15 Year Proration Schedule: 7 Year Proration Schedule: Year 1 = 93% Year 4 – 73% Year 7 – 53% Year 10 = 33% Year 13 = 13% Year 1 = 86% Year 4 = 43% Year 7 = 0% Year 2 = 87% Year 5 = 67% Year 8 = 47% Year 11 = 27% Year 14 = 7% Year 2 = 72% Year 5 = 29% Year 3 = 80% Year 6 = 60% Year 9 = 40% year 12 = 20% Year 15 = 0% Year 3 = 58% Year 6 = 15%

Exclusions specific to Pro-Tec Buildings: Damage or loss of any kind from (1) exposure of the fabric cover or end panel material to any heat source for any length of time; (2) a failure to properly compact and engineer soils; (3) a failure to properly construct footings and foundations; and (4) exposure to conditions in excess of the design wind and snow load specifications. NOTICE: Caustic and corrosive environments can resu lt from live animal operations or storage of caustic materials. Sioux Steel reserves the right to exclude from warranty under D(4) if co nditions are deemed by it as extreme. C. ITEMS COVERED SEPARATELY . The Sioux Steel warranties do not cover any parts, components or materials that are part of the Product, or used in conjunction with the Product, that are not manufactured by Sioux Steel. Such parts, components and materials will be subject to the warranties provided by the manufacturer, if any. D. WHAT IS NOT WARRANTED . Sioux Steel does not warrant and is not responsible for the following: (1) used products; (2) modification or alteration of the Products; (3) Products that have not been properly installed or not installed in accordance with the instruction manual, improper assembly, or improper construction by any persons other than Sioux Steel employees; (4) depreciation, damage or loss caused by the use of parts, components or accessories not provided by Sioux Steel, unauthorized repairs, normal wear, lack of necessary and proper maintenance, a failure to follow operating instructions/recommendations, misuse, lack of proper protection during storage, vandalism or theft, exposure to the elements or corrosive materials, accidents or acts of nature including lightning, flooding, hail, straight winds and tornadoes; and (5) cosmetic damage or damage that does not hinder the functionality of the Products. E. LIMITATIONS OF WARRANTIES AND CUSTOMER’S REMEDI ES. To the extent permitted by law, neither Sioux Steel, the Dealer nor any person or company affiliated with either of them makes any warranties, representations, conditions or promises express or implied as to the quality, performance or freedom from defects of the Products covered by these warranties other than those set forth herein. THERE ARE NO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. NEITHER SIOUX STEEL, THE DEALER, NOR ANY PERSON OR COMPANY AFFILIATED WITH EITHER OF THEM WILL BE LIABLE FOR ANY DAMAGES, INCLUDING, BUT NOT LIMITED TO, INCIDENTAL, SPECIAL, EXEMPLARY, CONSEQUENTIAL, LOST PROFITS AND REVENUES, LOST USE OF THE PRODUCTS OR ANY OTHER PROPERTY, BODILY INJURY OR PROPERTY DAMAGE CLAIMS OF ANY PERSON, LOST COMMODITIES, REMOVAL OR STORAGE COSTS FOR THE PRODUCTS, OTHER EQUIPMENT AND COMMODITIES, DAMAGE TO THE ENVIRONMENT ARISING FROM OR IN ANY MANNER RELATED TO ANY RELEASE OF HAZARDOUS MATERIALS, AND REMEDIATION EXPENSES THEREFORE, WHETHER BASED ON CONTRACT, TORT, STRICT LIABILITY OR ANY OTHER LEGAL BASIS, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO INSTANCE WILL SIOUX STEEL, THE DEALER OR ANY PERSON OR COMPANY AFFILIATED WITH EITHER OF THEM BE LIABLE TO CUSTOMER OR ANY PERSON IN AN AMOUNT IN EXCESS OF THE PURCHASE PRICE PAID BY CUSTOMER FOR THE PRODUCT. F. NO DEALER WARRANTY . THE DEALER HAS NO AUTHORITY TO MAKE ANY WARRANTY, REPRESENTATION, CONDITION OR PROMISE ON BEHALF OF SIOUX STEEL, OR TO MODIFY THE TERMS OR LIMITATIONS OF THIS WARRANTY IN ANY WAY. G. GOVERNING LAW/VENUE . These warranties, and all terms set forth herein, are governed by the laws of the State of South Dakota and, where applicable, the laws of the United States of America. Any and all disputes arising from these warranties, the purchase and use of the Products, bodily injury and property damage claims or otherwise must be venued in the South Dakota Circuit Court sitting in Minnehaha County, South Dakota. Customer agrees to such venue and waives any challenge to such court’s jurisdiction based upon lack of personal jurisdiction or inconvenience. H. SECURING WARRANTY SERVICE . In order to receive warranty services, customer must give Sioux Steel written notice of a warranty claim within 3 days of the date of discovery of the defective materials or workmanship, and Customer must complete the following steps:

(1) Obtain from Sioux Steel a Return Goods Authorization Number (“RMA Number”) by calling the Customer Service Department at 1-800-557-4689, and providing the following information:

� An explanation as to why the Product is being returned. � The name of the territory representative, Dealer or Sioux Steel salesperson from whom the Product was

purchased. � The Dealer’s identification number. � The invoice number and date of purchase. � Customer’s name, phone number, fax number, mailing address and email address. � The date that the Product will be returned.

(2) Pay the shipping charges to ship the Product to Sioux Steel’s factory, and the return shipping charges. (3) Ship the Product to Sioux Steel at 196 1/2 East Sixth Street, Sioux Falls, South Dakota 57104.

pro-tec awning systems

Documents