pricecatalogue 130207 middle
TRANSCRIPT
PRICE
CATALOGUE
2
COnTEnTsSyStem ConneCtion SChemeS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4laSer box ConneCtion SCheme - laSer box type allpoCo-04 . . . . . . . . . . . . . . . . . . . . . . 6
robotiC turntable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7FeatureS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7What iS inCluded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7optional aCCeSSory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
robotiC turntable Kit (type S, r, h) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10FeatureS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10What iS inCluded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11optional aCCeSSory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CentreleSS table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16FeatureS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16What iS inCluded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16optional aCCeSSory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
CentreleSS table Kit (type S, r, h) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18FeatureS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18What iS inCluded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18optional aCCeSSory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Cube (v5, v6, v6 roto poWer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23turntable mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24SuSpenSion mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24FeatureS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24What iS inCluded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25optional aCCeSSory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
tent / Cube table Kit (type S, r, h) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41FeatureS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41What iS inCluded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41optional aCCeSSory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
turninG platForm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48FeatureS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48What iS inCluded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
turninG platForm roto poWer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49FeatureS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50What iS inCluded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
turninG platForm roto poWer For WalKinG belt . . . . . . . . . . . . . . . . . 51
WalKinG belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52FeatureS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52optional aCCeSSory - to all typeS oF turninG platForm . . . . . . . . . . . . . . . . . . . . . . . 53
CarouSel 5000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67FeatureS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67What iS inCluded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67optional aCCeSSory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
3
robotiC arm(v7) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70FeatureS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70What iS inCluded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70optional aCCeSSory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
robotiC arm(v3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74FeatureS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74What iS inCluded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
vario . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75FeatureS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75What iS inCluded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
vario xl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77FeatureS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77What iS inCluded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77optional aCCeSSory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
multiCam boW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79FeatureS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79What iS inCluded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79optional aCCeSSory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
reCommended CameraS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81ConSiderationS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81reCommended modelS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Camera aCCeSSorieS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
other aCCeSSorieS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85netWorK SWitCheS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85poWer Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86Spare motor CableS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
traininG,Support & tranSport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88traininG at Client’S Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88traininG at Fotorobot .Cz Studio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89Standard Warranty & Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90premium Warranty & Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
ContaCtS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
edition: 130207
4
SyStem ConneCtion SChemeS
5
6
laSer box ConneCtion SCheme - laSer box type allpoCo-04
7
RObOTIC TURnTAbLE
FeatureS•Robotic Turntable as standard (capacity 40 kg) or heavy-duty (capacity 200 kg) model
•Maximum load 40 or 200 kg
•Switching between braked wheels for easy handling and feet for stable position
•Laser positioning (at extra charge, cat. No. KHLSP)
•Shelves for Control Units and for accessories
•Possibility to add Docking Set for Arm (at extra charge, cat. No. KHCKT)
What iS inCluded•Robotic Turntable
•Control Unit + AC power cable
•Motor cable (1 m)
•BASIP software license
€ 4 450 cat . no . Khrt40
€ 4 850 cat . no . Khrt200
8
optional aCCeSSory
docking set for arm - part for tableAfter the Robotic Arm has been set up to work in conjunction with the Robotic Table (any of Fotorobot.cz Tables): Even when the Robotic Arm is standing on its feet, it is still possible that the precise setup could be accidentally altered by the robot being knocked during the normal activity of a busy studio environment. To avoid this situation, we have developed a docking system between the Robotic Arm and the Robotic Table as an optional accessory. The Docking Set consisting of two parts (cat. No. KHCKA for Robotic Arm side and cat. No. KHCKT for Robotic Table side).
KHCKA + KHCKT
transparent background set for robotic turntableTable can be easily converted for transparent background photography. Great for bottles and other transparent objects made of glass or similar materials, where counter light photography is required to show material structure.
Consists of 2 parts:
1) upper plate,
2) set of three legs. Legs to be bolted into the threaded holes in the rotating plate of Robotic Turntable.
€ 80 cat . no . KhCKt
€ 310Diameter 950 mm
cat . no . Khap95rt
9
Horizontal background plateFor Robotic Turntable and Cube (cat. no. KHCB). Excellent for quick change of background colour. Made of white durable plastic. Great for Cube used inside our photographic tent – whole bottom of the tent is covered by the plate! Diameter 950 mm.
.One side white one side black.
power multi-socketMulti-socket of PC type, i. e. suitable for any country .
reduces all the power cables of Fotorobot.cz system (of Control Units, Laser Boxes, Switch...) to one, being plugged in AC power grid.
€ 65 cat . no . KhpWb95
€ 58 cat . no . KhpCJez7
10
RObOTIC TURnTAbLE KIT (TyPE s, R, H)
FeatureS•Robotic Turntable in standard (capacity 40 kg) or heavy-duty (capacity 200 kg) finishing
•Maximum load 40 or 200 kg
•Switching between braked wheels for easy handling and feet for stable position
•Laser positioning (at extra charge, cat. No. KHLST)
•Shelves for Control Units and for accessories
•Pair of Side Stemples type S or R or H integrated
• Jib for holding of Cube+Lasers+Black Shields integrated; allows a) overhead Cube installation, b) installation of lasers for object centering as well as c) hanging of Black Shields (with adjustable position left-right, front-back, up-down)
• Jib for holding of Paper or Textile or Plastic Background integrated
•Paper and plastic backgrounds set (white) included
•Set of pins, sockets and uni-clamps for additional accessories, lights, reflection boards etc.
•Possibility to add Docking Set for Arm (at extra charge, cat. No. KHCKT)
•Table dimensions: 180 cm width × 148 cm depth × 241 cm height (208 cm with jibs dismantled)
€ 6 150 cat . no . KhrtKit200S€ 5 750 cat . no . KhrtKit40S
11
What iS inCluded•Robotic Turntable
•Control Unit + AC power cable
•Motor cable (1m)
•BASIP software license
•Pair of Side Stemples type S or R or H
• Jib for Holding of Cube+Lasers+Black Shields
•Pair of Side Black Molton Shields
•10 x Uni-Clamp Pin
•5 x Uni-Clamp Socket
• Jib for Holding of Background
•White Paper Background (ZC1165)
•2× White Plastic Background (ZC311015)
•Expander stud for background - 1 pair (FY7345)
•Fixing fork W-2 for expander stud - 1 pair (FY7337)
optional aCCeSSory
reinforcing of side stemples to type rNecessary when CUBE in suspension mode is to be used with the Table.
By this, cat. no. of the Table changes to KHRTKITR
reinforcing of side stemples to type HNecessary when VARIO S is to be used with the Table.
By this, cat. no. of the Table changes to KHRTKITH.
€ 50 KhrtKitS to KhrtKitr
€ 100 KhrtKitS to KhrtKith
12
docking set for arm - part for tableAfter the Robotic Arm has been set up to work in conjunction with the Robotic Table (any of Fotorobot.cz Tables):
Even when the Robotic Arm is standing on its feet, it is still possible that the precise setup could be accidentally altered by the robot being knocked during the normal activity of a busy studio environment. To avoid this situation, we have developed a docking system between the Robotic Arm and the Robotic Table as an optional accessory.
The Docking Set consisting of two parts (cat. No. KHCKA for Robotic Arm side and cat. No. KHCKT for Robotic Table side)
KHCKA + KHCKT
transparent background set for robotic turntableTable can be easily converted for transparent background photography. Great for bottles and other transparent objects made of glass or similar materials, where counter light photography is required to show material structure.
Consists of 2 parts: 1) upper plate, 2) set of three legs. Legs to be bolted into the
threaded holes in the rotating plate of Robotic Turntable.
Horizontal background plateFor Robotic Turntable and Cube (cat. no. KHCB). Excellent for quick change of background colour. Made of white durable plastic. Great for Cube used inside our photographic tent – whole bottom of the tent is covered by the plate! Diameter 950 mm.
.One side white one side black.
€ 80 cat . no . KhCKt
€ 310 Diameter 950 mm
cat . no . Khap95rt
€ 65 cat . no . KhpWb95
13
laser set for table•2× Industrial Line-Laser
•Self-levelling Line-Laser (ACCU) with tripod, in case
•Laser Box enabling automatic on/off laser switching
laser box type allpoCo-04: all the ports are controlled together (i. e. at the same moment all the ports with lasers are switched either on or off)
4 ports for (up to) 4 Industrial Line-Lasers
laser box type seppoco-20 (excHange for laser box type allpoco-04 in laser set)
•separate por ts control
•20 ports for (up to) 20 Industrial Line-Lasers or other USB devices
Enables to switch any of 20 ports (i. e. 20 lasers or other USB devices)on/off, independently one on each other, when the photo-sequence does not run. Brings advantage when more complicated laser handling is used (system of laser grids), or in co-operation with Brake Support under the Platform Plate
Velour black background for robotic turntableGreat for black-background scenes due to excellent light absorption 1,49 (width) × 7,32 m (length)
€ 1 000 cat . no . KhlSt
€ 520 cat . no . KhSeppoCo20ex
€ 73 cat . no . zC4105
14
paper backgrounds for robotic turntableRolled on paper core
SIZE 1.35 x 11 M SIZE 1.35 x 11 MZC1165 ZC1131ZC1192 ZC1189ZC1174 ZC1194ZC1179 ZC1133ZC1185 ZC1164ZC1191 ZC1137ZC1171 ZC1159ZC1103 ZC1195ZC1127 ZC1166ZC1101 ZC1134ZC1102 ZC1114ZC1128 ZC1148ZC1177 ZC1141ZC1136 ZC1126ZC1181 ZC1196ZC1187 ZC1106ZC1105 ZC1122ZC1123 ZC1180ZC1139 ZC1121ZC1149 ZC1184ZC1168 ZC1144ZC1182 ZC1173ZC1170 ZC1104
power multi-socketMulti-socket of PC type, i. e. suitable for any country .
reduces all the power cables of Fotorobot.cz system (of Control Units, Laser Boxes, Switch...) to one, being plugged in AC power grid.
€ 38cat . no . zC . . . (please see the chart below)
1 .35 m (width) × 11 m (length)
€ 58 cat . no . KhpCJez7
15
HedgeHog flasH Holder set for robotic turntable - 4 paws Saves precious space in your photo studio. no more tripods for flash lights, stealing space and blocking your entrance to the Table.
This set converts your Table Kit photo-workstation into a mobile version. Do you need to photograph many tiny objects spaced out over the whole warehouse? Robotic Turntable Kit with flash lights (2 for object, 2 for background lighting) is a smart solution of this problem.
And, one big advantage as a bonus: Thanks to the hedgehog system, all the power cables of flash lights are overhead . no more stumbling over the cables, hanging from tripods . . .
Flash lights on the holders are fully adjustable - up/down, left/right, closer/farther . Real hedgehog. Flexible hedgehog!
(Flash lights not included).
HedgeHog flasH Holder for all tables - paw for oVerHead ligHt Boom construction for overhead light.
€ 735 cat . no . KhFhrt4
€ 172 cat . no . KhFhall1
16
CEnTRELEss TAbLE
Developed for quick shooting of glassware and bottles. You will appreciate its high productivity value when photographing large volumes of wine bottles, glass sets etc.
FeatureS•Brings the best optical outputs from all robotic machines, thanks to the light coming from bottom, under the object
•Maximum load 25 kg
•Switching between braked wheels for easy handling and feet for stable position
•Laser positioning (at extra charge, cat. No. KHLSP)
•Shelves for Control Units
•Possibility to add Docking Set for Arm (at extra charge, cat. No. KHCKT)
What iS inCluded•Centreless Table
•Control Unit + AC power cable
•Motor cable (10 m) on spool
•BASIP software license
€ 4 550 cat . no . KhCart
17
optional aCCeSSory
docking set for arm - part for tableAfter the Robotic Arm has been set up to work in conjunction with the Robotic Table (any of Fotorobot.cz Tables):
Even when the Robotic Arm is standing on its feet, it is still possible that the precise setup could be accidentally altered by the robot being knocked during the normal activity of a busy studio environment. To avoid this situation, we have developed a docking system between the Robotic Arm and the Robotic Table as an optional accessory.
The Docking Set consisting of two parts (cat. No. KHCKA for Robotic Arm side and cat. No. KHCKT for Robotic Table side).
KHCKA + KHCKT
power multi-socketMulti-socket of PC type, i. e. suitable for any country .
reduces all the power cables of Fotorobot.cz system (of Control Units, Laser Boxes, Switch...) to one, being plugged in AC power grid.
€ 80 cat . no . KhCKt
€ 58 cat . no . KhpCJez7
18
CEnTRELEss TAbLE KIT (TyPE s, R, H)
FeatureS•Brings the best optical outputs from all robotic machines, thanks to the light coming from bottom, under the object
•Maximum load 25 kg
•Switching between braked wheels for easy handling and feet for stable position
•Laser positioning (at extra charge, cat. No. KHLST)
•Shelves for Control Units
•Pair of Side Stemples type S or R or H integrated
• Jib for holding of Cube+Lasers+Black Shields integrated; allows a) overhead Cube installation, b) installation of lasers for object centering as well as c) hanging of Black Shields (with adjustable position left-right, front-back, up-down)
• Jib for holding of Background integrated
•Special Bottom&Back Light Background with 2 functions: Vertically - light comes from bottom (thanks to reflecting part), while at the same time horizontally - light is evenly spreaded (thanks to light-dispersing part, made from softbox fabric). At extra charge, cat. No. KHCARTBBL. We strongly recommend - only with this background there is possible to utilize Centreless table for 100%
•Possibility to add Docking Set for Arm (at extra charge, cat. No. KHCKT)
•Table dimensions: standard 118 cm width × 160 cm depth × 208 cm height
What iS inCluded•Centreless Table
•Control Unit + AC power cable
•Motor cable (4 m)
•BASIP software license
•Pair of Side Stemples type S or R or H
• Jib for Holding of Cube+Lasers+Black Shields
•Pair of Side Black Molton Shields
•10 x Uni-Clamp Pin
•5 x Uni-Clamp Socket
• Jib for Holding of Background
€ 7 200 with 113 cm plate (wide)
cat . no . KhCart113KitS
€ 5 700 with 84 cm plate (standard)
cat . no . KhCartKitS
19
Centreless Table Kit Workstation
optional aCCeSSory
reinforcing of side stemples to type rNecessary when CUBE in suspension mode is to be used with the Table.
By this, cat. no. of the Table changes to KHRTKITR
reinforcing of side stemples to type HNecessary when VARIO S is to be used with the Table.
By this, cat. no. of the Table changes to KHRTKITH.
€ 50 KhCartKitS to KhCartKitr
€ 100 KhCartKitS to KhCartKith
20
docking set for arm - part for tableAfter the Robotic Arm has been set up to work in conjunction with the Robotic Table (any of Fotorobot.cz Tables):
Even when the Robotic Arm is standing on its feet, it is still possible that the precise setup could be accidentally altered by the robot being knocked during the normal activity of a busy studio environment. To avoid this situation, we have developed a docking system between the Robotic Arm and the Robotic Table as an optional accessory.
The Docking Set consisting of two parts (cat. No. KHCKA for Robotic Arm side and cat. No. KHCKT for Robotic Table side).
KHCKA + KHCKT.
laser set for table•2× Industrial Line-Laser
•Self-levelling Line-Laser (ACCU) with tripod, in case
•Laser Box enabling automatic on/off laser switching
laser box type allpoCo-04: all the ports are controlled together (i. e. at the same moment all the ports with lasers are switched either on or off)
4 ports for (up to) 4 Industrial Line-Lasers
laser box type seppoco-20 (excHange for laser box type allpoco-04 in laser set)
•separate por ts control
•20 ports for (up to) 20 Industrial Line-Lasers or other USB devices
Enables to switch any of 20 ports (i. e. 20 lasers or other USB devices)on/off, independently one on each other, when the photo-sequence does not run. Brings advantage when more complicated laser handling is used (system of laser grids), or in co-operation with Brake Support under the Platform Plate.
€ 80 cat . no . KhCKt
€ 1 000 cat . no . KhlSt
€ 520 cat . no . KhSeppoCo20ex
21
bottom&back ligHt backgroundAmazing special background for backlight photography. REFLECTIVE PART „catches“ the light (from the lower light source), directing it under the transparent Plate of Centreless Table. LIGHT-DISPERSING PART distributes the light (from the back light source) for evenly lighted background, without affecting foreground lighting.
We strongly recommend . only with this background there is
possible to utilize Centreless table for 100% .
black molton background for centreless table kit & tent table kit for cubeSpecial Textile Black Molton Background, size 1 m (width) x 3 m (length)
Edges shaped by pinking shears.
High light absorption - great for no-retouching 3D photography.
power multi-socketMulti-socket of PC type, i. e. suitable for any country .
reduces all the power cables of Fotorobot.cz system (of Control Units, Laser Boxes, Switch...) to one, being plugged in AC power grid.
€ 226 for table with 84 cm plate
cat . no . KhCartbbl
€ 380 for table with 113 cm plate
cat . no . KhCart113bbl
€ 32 cat . no . Khmobb301
€ 58 cat . no . KhpCJez7
22
HedgeHog flasH Holder set for centreless table - 4 pawsThis set saves precious space in your photo studio. no more tripods for front flash lights, stealing space and blocking your entrance to the Table.
And, one big advantage as a bonus: Thanks to the hedgehog system, the power cables of front flash lights are overhead . no more stumbling over the cables, hanging from tripods . . .
Flash lights on the holders are fully adjustable - up/down, left/right, closer/farther . Real hedgehog. Flexible hedgehog!
(Flash lights not included).
HedgeHog flasH Holder for all tables - paw for oVerHead ligHt Boom construction for overhead light.
€ 735 for table with 84 cm plate
cat . no . KhFhCart4 € 735 for table with 113 cm plate
cat . no . KhFh113Cart4
€ 172 cat . no . KhFhall1
23
CUbE (v5, v6, v6 ROTO POwER)A very clever member of our Fotorobot.cz family, with increased capacity comparing to older Cube types. Cube v5/v6/v6 roto power can hold 130 kg in turntable as well as suspension mode.
Cube type cat . no . € speedsmax .load kg
360° spin time sec
max . torque
nm
machine weight
kg
zero play gear
bult-in aC socket
v5 KhCbv5 3 400 1 130 4 .0 19 .6 14 .74 − −
v6 KhCbv6 3 800 1 130 2 .7 98 .0 22 .10 √ −
v6 roto power KhCbv6rop 4 800 1 130 2 .7 98 .0 22 .48 √ √
€ 4 800 cat . no . KhCbv6rop
€ 3 800 cat . no . KhCbv6
€ 3 400 cat . no . KhCbv5
24
turntable modeIn turntable mode (acting as a mini turntable), it allows for photography of small up to middle-sized objects (of maximal dimension appx. 60 - 65 cm). For this mode, Cube is equipped with 95 cm diameter Horizontal Background Plate one side white, one side black (cat. No. KHPWB95). Price of the Plate is included in price of Cube.
Turntable Mode also works well free standing on the floor for fashion photography on mannequins, or even LIVE PEOPLE. Or, in conjunction with the Tent/Cube Table Kit cat. No. KHTTKIT) for easy photography of reflective items.
SuSpenSion modeIn SuSpenSion mode, the Cube can also be used as an overhead unit for the hanging of large objects and its movement synchronises perfectly with the other turntable units (tables KHRTKIT, KHCARTKIT, KHTTKIT as well as platform KHTP).
Cube can be shouldered with 2 - 8 hanging bars (v6 roto power with 2 - 7 bars) . This improves possibilities of objects suspension substantially. Even very complicated objects can be hung very easy.
FeatureS•Most flexible and universal robotic machine
•Max. balanced load 130 kg in turntable mode
•Max. balanced load 130 kg in Suspension mode
•Laser positioning (at extra charge, item KHLST or KHLSP
•Hanging Bars - for photos of hung objects (jewellery, bicycles, etc. )
•Synchronized motion with Robotic Turntable, Centreless Table, Tent/Cube Table Kit or Turning Platform
25
What iS inCluded•Cube
•Control Unit + AC power cable
•Motor cable (10 m) on spool
•BASIP software license
•Hanging bars (4 pieces)
•Overhead Click-plate (for Suspension mode, can be mounted on each type of Fotorobot.cz tables or portals), with click-system for easy Cube on/off fixing
•Lower Click-plate - stabilizing iron base plate (for Turntable mode, can be used free or screwed to any surface) with click-system for easy Cube on/off fixing
•Background Plate one side white, one side black (diameter 950 mm)
26
CUBE IN TURNTABLE MODEwith wooden plate diameter 100 cm (cat. No. KPBC100 black or KPWC100 white, at extra charge)
CUBE IN SUSPENSION MODEDr. Jekyll and Mr. Hyde, both can be photographed together on the Cube in Turntable mode.
27
Cube hangs - here, for example, on HD Cube Portal (cat. No. KHCPHD)
28
optional aCCeSSory
Hanging bar for cube V5/V64 pieces of Hanging Bars are included in each packing of Cube. Additional Hanging Bars are helpful in following cases: - in suspension mode, when more complicated or when heavy objects are to be suspended - in turntable mode, when heavy objects are to be shot
Each Hanging Bar has capacity of 25 kg.
feet set for cube V5/V6Set of 4 feet can be used instead of Lower Click-plate for photographing outside of Tent Table Kit for Cube. This is very helpful when your Lower Click-plate is firmly screwed as a base in the Tent/Cube Table Kit (cat. No. KHTTKIT) or on any other place. Then, Feet Set enables quick temporary use of Cube outside the Tent/Cube Table Kit.
transparent background set witH baseCube (used in „turntable“ mode) can be easily converted for transparent background photography. Great for bottles and other transparent objects made of glass or similar materials, where counter light photography is required to show material structure.
Consists of 3 parts: 1) upper plate 2) set of three legs 3) lower plate. Legs to be bolted into the threaded holes in the lower plate.
€ 20 cat . no . KhCbbar
€ 20 cat . no . KhCbF4S
€ 360Diameter 950 mm
cat . no . Khap95aSe
29
Horizontal background plateFor Robotic Turntable and Cube (cat. no. KHCB). Excellent for quick change of background colour. Made of white durable plastic. Great for Cube used inside our photographic tent – whole bottom of the tent is covered by the plate! Diameter 950 mm..
One side white one side black
oVerHead click-plate for cubeOne piece of Overhead Click-plate for Cube is included in each packing of Cube (KHCB).
Additional piece/pieces of this item help if only one Cube is available, and this Cube is to be changed between more places in the studio for suspension mode. Just click the Cube, when the Overhead Click-plates are ready on their places on various Tables, Cube Portals.
laser set for platform and cube•2× Industrial Line-Laser
•Self-levelling Line-Laser (ACCU) with tripod, in case
•Laser Box enabling automatic on/off laser switching
laser box type allpoCo-04: all the ports are controlled together (i. e. at the same moment all the ports with lasers are switched either on or off) 4 ports for (up to) 4 Industrial Line-Lasers
•2× Tripods for Industrial Line-Laser
€ 65 cat . no . KhpWb95
€ 82 cat . no . KhCboCp
€ 1 100 cat . no . KhlSp
30
laser box type seppoco-20 (excHange for laser box type allpoco-04 in laser set)
•separate por ts control
•20 ports for (up to) 20 Industrial Line-Lasers or other USB devices
Enables to switch any of 20 ports (i. e. 20 lasers or other USB devices)on/off, independently one on each other, when the photo-sequence does not run. Brings advantage when more complicated laser handling is used (system of laser grids), or in co-operation with Brake Support under the Platform Plate.
suspending system for sHooting of ligHting cHandeliers•Enables to photograph lighting chandeliers on Cube type KHCBV6ROP, when Cube is suspended on any of Fotorobot.cz table or portal
•Consist of 5 parts:
Cube roto power (cat . no . KhCbv6rop)
+ 100 cm white circle plate (cat . no . KpWC100)
+ chandelier system - set for cube (cat . no . KhtxCS)
+ chandelier system - set for 100 cm plate (cat . no . KhtxpS)
+ chandelier system - cable with terminal black (cat . no . Khtxtb)
€ 520 cat . no . KhSeppoCo20ex
31
cHandelier system - set for cube•3 pins being put on the hanging bars of Cube
cHandelier system - set for 100 cm plate•3 hangers for pins being put on the 100 cm plate (100 cm plate at extra charge)
cHandelier system - cable witH terminal black•one end for OUT connector of Cube, the other end for chandelier wires
€ 15 cat . no . KhtxCS
€ 100 cat . no . KhtxpS
€ 10 cat . no . Khtxtb
32
cube rotary seat for liVe models•For photographing of objects on live model’s legs – stockings, shoes ( especially strap shoes), boots
•Springed, flexible hinge (cardan joint)
•Vertically adjustable seat
•Vertically adjustable arm rests
•Holes for attaching of various photographic equipment
€ 820 cat . no . KhCSm
33
HeaVy-duty cube portal
•Heavy Duty Cube Portal with adjustable height and width, on massive poles
•Easy height setting
•Laser holders included
•Configuration A: Cube in Suspension mode + Cube in Turntable mode *
•Configuration B: Cube in Suspension mode + Turning Platform *
•Configuration C: Cube Rotary Seat for Live Models with Turning Platform
Total height: 270 cm Stand base: 103 × 93 cm Max Cube bar height: 222 cm Column centre distance: 300 - 4800 mm Total width: 468 cm Capacity up to 170 kg
* “Turntable” and “Suspension” mode, please see Cube description.
€ 1 670 cat . no . KhCphd
34
ligHt cube portal•T-Shape Light Cube Portal, on tripods (with castors)
•Laser holders included.
•Width 3500 or 5000 mm
•Configuration A: Cube in Suspension mode + Cube in Turntable mode *
•Configuration B: Cube in Suspension mode + Turning Platform *
* “Turntable” and “Suspension” mode, please see Cube descriptionRoad-show packaging
HeaVy duty rack-case for control unitsThe best „home“ for sensitive electronic devices: Control Units, Laser Box and Switch. Safe and stable in the studio as well as when travelling
•antiShoCK FiniShinG - inner part of Case hangs on Rubber Silent Blocks
•Reinforced edges
•Ready to travel whenever & promptly - front and back cover with butterfly lockers, high-quality rubber castors
•power multi-socket included (socket of PC type, i. e. suitable for any country) - included
•All the wiring inside
So many cables... And, only one leads out!
€ 832 cat . no . KhCpl3500
total width: 3500 mm total height: 1500 - 3100 mm max . object weight: 18 kg
€ 912cat . no . KhCpl5000
total width: 5000 mm total height: 1500 - 3100 mm max . object weight: 11 kg
€ 620 cat . no . KhrSr19
35
underHanging bar for cube, lengtH 1.5 mSpecial gadget for shooting of bicycles. Hanging of bicycles upside down is more time effective than hanging them in normal position. Fastening of nylons is easier, and the gravity centre can be found with less effort.
€ 168 cat . no . KhCbbaru150
36
excHangable click-system for pVc mannequins:When each mannequin has it‘s own CenterinG pin (cat . no . Khthp34) pre-mounted on it‘s leg, exchanging of mannequins is matter of seconds . After adjusting of a dress, just click it on the torSo holder (cat . no . Khtht) - ready for photographing, already centered!
Adjusting of a dress on the mannequin always takes more time than photographing. So, when snaping one mannequin, few others are being prepared in the meantime. This speeds up the workflow substantially. For more comfortable work when adjusting dress on the mannequin, we recommend our rig plate For torSo holder + torSo holder (cat . nos . KhthC + Khtht
This solution, where the PVC mannequin is fixed on one leg only, brings a big advantage: It is possible to photograph even underwear and trousers (non-stretch finishing).
37
torso Holder (kHtHt) + reduction (kHtHr) + cube (kHcbV5)
torso Holder
reduction for torso Holder
¾ mannequin prepared for centering pin – transparent
• man • woman
• kid 7 years • kid 4 years
mannequin especially adapted for CENTERING PIN to be bolted on it‘s leg. (Assembling takes appx. 10 minutes).
€ 280 cat . no . Khtht
€ 48 cat . no . Khthr
€ 122 cat . no . Khth34m € 122 cat . no . Khth34F
€ 122 cat . no . Khth34K7 € 122 cat . no . Khth34K4
38
centering pin for ¾ mannequin
•pin for man • pin for woman
• pin for kid 7 years • pin for kid 4 years
€ 62 cat . no . Khthp34m € 62 cat . no . Khthp34F
€ 62 cat . no . Khthp34K7 € 62 cat . no . Khthp34K4
39
Exchange of CENTERING PIN on MANNEQUIN‘S LEG takes appx. 10 minutes. Therefore, for fluent workflow, we recommend each mannequin has it‘s own CENTERING PIN.
support for torso Holderonly when very heavy ClotheS are photographed - fur coats etc . (not advantageous for current work, as this disables the possibility to photograph underwear and trousers)
•support for man • support for woman
• support for kid 7 years • support for kid 4 years
€ 38 cat . no . KhthS34m € 38 cat . no . KhthS34F
€ 38 cat . no . KhthS34K7 € 38 cat . no . KhthS34K4
40
plate for torso HolderAdjusting of a dress on the mannequin always takes more time than photographing. So, when shooting one mannequin, few others must be prepared in the meantime. For this serves the rig plate For torSo holder + torSo holder (cat . nos . KhthC + Khtht) .
€ 50 cat . no . KhthC
41
TEnT / CUbE TAbLE KIT (TyPE s, R, H)
Caution: CUBE IS NOT INCLUDED
FeatureS•Cube (KHCB) with plate (KHPWB95) can be placed inside tent for shiny object photography. Cube not included .
•Maximum load - please see Cube
•Switching between braked wheels for easy handling and feet for stable position
•Laser positioning (at extra charge, cat. No. KHLST)
•Shelves for Control Units and for accessories
•Pair of Side Stemples type S or R or H integrated
• Jib for holding of Cube+Lasers+Black Shields integrated; allows a) overhead Cube installation, b) installation of lasers for object centering as well as c) hanging of Black Shields (with adjustable position left-right, front-back, up-down)
• Jib for holding of 1 m wide Textile (cat. No. KHMOBB301) or Plastic Background integrated
•Set of pins, sockets and uni-clamps for additional accessories, lights, reflection boards etc.
•photographing in both modes, turntable and suspension . two Cubes can be used in synchronized mode - lower Cube in turntable mode, upper Cube in suspension mode *
•Diffusion tent can be easily removed by unclamping. Then, the Tent Table Kit can be used for standard photographing (with the background)
•Possibility to add Docking Set for Arm (at extra charge, cat. No. KHCKT)
•Table dimensions: 118 cm width × 155 cm depth × 210 cm height
* “turntable” and “Suspension” mode: please see Cube description
What iS inCluded•Tent Table for Cube
•Diffusion Tent
•Pair of Side Stemples type S or R or H
• Jib for Holding of Cube+Lasers+Black Shields
•Pair of Side Black Molton Shields
• Jib for Holding of Background
€ 2 660 cat . no . KhttKitS
42
. .Unclamping tent, the Tent Table Kit for Cube changes to robotic turntable kit - on the spot. For this usage (without tent), 1-m wide backgrounds are necessary. Using the table without tent, still 2 Cubes can be used in synchronised mode - lower Cube in turntable mode, upper Cube in suspension mode If there is a need to use
one Cube only, in suspension mode, the Cube in lower position can be removed. In this case, thanks to the special cover, the hole in the table disappears. Flat surface is not only better-looking, but first of all more user-friendly. The working area gets bigger
43
how Feet Set for Cube can be helpful - this is an example: Your lower Click-plate
is firmly screwed in the tent table . However, suddenly - some object is so high that can not fit on the tent table! No problem with Feet Set for Cube .
put them on the Cube (which can be easily clicked out of the Lower Click-plate in the Tent Table) and shoot the high object simply on the floor .
44
optional aCCeSSory
reinforcing of side stemples to type rNecessary when CUBE in suspension mode is to be used with the Table. By this, cat. no. of the Table changes to KHRTKITR
reinforcing of side stemples to type HNecessary when VARIO S is to be used with the Table. By this, cat. no. of the Table changes to KHRTKITH.
docking set for arm - part for tableAfter the Robotic Arm has been set up to work in conjunction with the Robotic Table (any of Fotorobot.cz Tables):
Even when the Robotic Arm is standing on its feet, it is still possible that the precise setup could be accidentally altered by the robot being knocked during the normal activity of a busy studio environment. To avoid this situation, we have developed a docking system between the Robotic Arm and the Robotic Table as an optional accessory.
The Docking Set consisting of two parts (cat. No. KHCKA for Robotic Arm side and cat. No. KHCKT for Robotic Table side).
KHCKA + KHCKT .
€ 50 KhttKitS to KhttKitr
€ 100 KhttKitS to KhttKith
€ 80 cat . no . KhCKt
45
laser set for table•2× Industrial Line-Laser
•Self-levelling Line-Laser (ACCU) with tripod, in case
•Laser Box enabling automatic on/off laser switchingLaser Box type ALLPOCO-04:all the ports are controlled together (i. e. at the same moment all the ports with lasers are switched either on or off)4 ports for (up to) 4 Industrial Line-Lasers
laser box type seppoco-20 (excHange for laser box type allpoco-04 in laser set)
laser box type SeppoCo-20:
separate por ts control
20 ports for (up to) 20 Industrial Line-Lasers or other USB devices
enables to switch any of 20 ports (i . e . 20 lasers or other uSb devices)on/off, independently one on each other, when the photo-sequence does not run .
brings advantage when more complicated laser handling is used (system of laser grids), or in co-operation with brake Support under the platform plate .
black molton background for centreless table kit & tent table kit for cubeSpecial Textile Black Molton Background, size 1 m (width) x 3 m (length)
Edges shaped by pinking shears
Excellent price/performance ratio
High light absorption - great for no-retouching 3D photography.
€ 1 000 cat . no . KhlSt
€ 520 cat . no . KhSeppoCo20ex
€ 32 cat . no . Khmobb301
46
plastic backgrounds for tent table kitFor photographing with Diffusion Tent removed. 1 m (width) × 1.3 m (length)
Including plastic holding batten.
COLORMATT 1 x 1.30 M COLORMATT 1 x 1.30 MZC311015 Snow ZC321309 Super WhiteZC312330 Primose ZC327260 BilliardZC312710 Daffodil ZC326800 SapphireZC311710 Tangerine ZC322400 Honey DewZC314550 Poppy ZC323660 SunsetZC318430 Russett ZC324630 Pillar BoxZC318620 CoffeeZC319700 CoalZC319010 Dove GreyZC319160 PewterZC319270 SlateZC315047 Electric BlueZC316400 Royal BlueZC316900 NavyZC317100 Spring GreenZC317610 Bottle GreenZC317945 Holly
power multi-socketMulti-socket of PC type, i. e. suitable for any country .
reduces all the power cables of Fotorobot.cz system (of Control Units, Laser Boxes, Switch...) to one, being plugged in AC power grid.
€ 24 cat . no . zC… (please see the chart below)
€ 58 cat . no . KhpCJez7
47
HedgeHog flasH Holder set for tent/cube table - 4 pawsSaves precious space in your photo studio. no more tripods for flash lights, stealing space and blocking your entrance to the Table.
This set converts your Table Kit photo-workstation into a mobile version. Do you need to photograph many tiny objects spaced out over the whole warehouse? Tent Table Kit (for Cube) with flash lights (2 for object, 2 for background lighting) is a smart solution of this problem.
And, one big advantage as a bonus: Thanks to the hedgehog system, all the power cables of flash lights are overhead . no more stumbling over the cables, hanging from tripods . . .
Flash lights on the holders are fully adjustable - up/down, left/right, closer/farther . Real hedgehog. Flexible hedgehog!
(Flash lights not included).
HedgeHog flasH Holder for all tables - paw for oVerHead ligHt Boom construction for overhead light.
€ 735 cat . no . KhFhtt4
€ 172 cat . no . KhFhall1
48
TURnInG PLATFORM
Allows photography of large objects up to max. weight of 1500 kg. Not suitable for very small objects, under approx. 30 cm.
Fast rotation mode – suitable for objects up to approx. 300 kg – furniture, live models, machines, motorcycles
Heavier objects? Just switch to Slow rotation mode - then it is even possible to photograph an inflatable swimming pool filled with 1000 litres of water complete with bathing models!
If Arm (cat. No. KHRA) or Vario xL (cat. No. KHVARIOxL) is added, pictures from top view (up-down) can be taken as well.
FeatureS•Extremely Heavy-Duty robotic machine
•Maximum load 1500 kg
•Laser positioning (at extra charge, cat. No. KHLSP)
•Fast and Slow Rotation Modes
•180 cm or 280 cm diameter plate in black or white colour available
• Ideal choice for photographing of fashion - on PVC mannequins as well as live models
What iS inCluded•Base of Turning Platform
•Control Unit + AC power cable
•Motor cable (10 m) on spool
•BASIP software license
•Platform Star (to support 180 cm diameter plate)
•Platform Plate (Disc) of 180 cm diameter, white
turning platform type € speedsmax .load kg
360° spin time sec
max . torque
nm
machine weight
kg
zero play gear
bult-in aC
socket
run with
Walking belt
1-speed, cat . no . KhtpSp1 5 000 1 300 12 .0 63 .7 62 − − −
Standard, cat . no . Khtp 5 660 2 1 500 6 .0 186 .2 75 − − −
roto power, cat . no . Khtprop
6 660 2 1 500 5 .7 245 .0 78 √ √ −
roto power for Walking belt, cat . no . KhtpropW
7 250 2 1 500 5 .7 245 .0 79 √ √ √
€ 5 660 cat . no . Khtp
49
TURnInG PLATFORM ROTO POwER
Marvellous extra feature comparing to standard Turning Platform: built-in aC socket, rotating simultaneously with the robot .
this enables to shoot objects - electrical appliances, being switched on, or powered . lighting lamps, lighting displays of various devices . . . but also driving of electrical appliances when making animations during photographing .
Allows photography of large objects up to max. weight of 1500 kg. Not suitable for very small objects, under approx. 30 cm.
Fast rotation mode – suitable for objects up to approx. 300 kg – furniture, live models, machines, motorcycles
Heavier objects? Just switch to Slow rotation mode - then it is possible to put up to 1500 kg on Turning Platform.
However, one more feature (comparing to standard Turning Platform) which makes work more easy: Fast and Slow rotation mode is switched by software (in Basip control program). No more physical changing of cables, no kneeling and back bending!
If Arm (cat. No. KHRA) or Vario xL (cat. No. KHVARIOxL) is added, pictures from top view (up-down) can be taken as well.
Anchoring to floor
€ 6 660 cat . no . Khtprop
50
FeatureS•Extremely Heavy-Duty robotic machine
•Maximum load 1500 kg
•Laser positioning (at extra charge, cat. No. KHLSP)
•Fast and Slow Rotation Modes
•180 cm or 280 cm diameter plate in black or white colour available
• Ideal choice for photographing of electrical appliances which look better being switched on, or it is good to power them
What iS inCluded•Base of Turning Platform
•Control Unit + AC power cable
•Motor cable (10 m) on spool
•BASIP software license
•Platform Star (to support 180 cm diameter plate)
•Platform Plate (Disc) of 180 cm diameter, white
Washing machine - powered during photographing on Turning Platform Roto Power
51
TURnInG PLATFORM ROTO POwER FOR wALKInG bELT
The only Turning Platform suitable to power Waling Belt (cat. No. KHWAB) to make together the VIRTUAL CATWALK
Otherwise, the parameters and usage are the same as with standard Turning Platform Roto Power (cat. No. KHTPROP).
KHTPROPW + KHWAB = VIRTUAL CATWALK
Anchoring to floor € 7 250 cat . no . KhtpropW
52
wALKInG bELT Together with KHTPROPW make the VIRTUAL CATWALK.
It is a device for video- or photo shooting of live people when walking. Fashion shooting on the cozy area of 3x3 m, using your perfect studio lighting instead of poor light in the real fashion-show hall.
FeatureS•Fashion video- or photo shooting
•With KHTPROPW, e-axis motion
•Fluently adjustable belt speed
•Programmable scripts
•Large belt area of 70 x 200 cm
Turning Platform Roto Power for Walking Belt + Walking Belt = VIRTUAL CATWALK
€ 6 000 cat . no . KhWab
53
optional aCCeSSory - to all typeS oF turninG platForm
platform plates (discs)
star to support platform plate 280 cm diameter (two-piece)
•Circle, diameter 180 cm, white plate;
€ 180 cat . no . KpWC180
for turning platform
•Circle, diameter 180 cm, black plate;
€ 180 cat . no . KpbC180
for turning platform
•Ellipse, 262 × 198 cm, white plate;
€ 180 cat . no . KpWe262
for turning platform
•Ellipse, 262 × 198 cm, black plate;
€ 180 cat . no . Kpbe262
for turning platform
•Circle, diameter 280 cm, white plate (two-piece);
€ 440 cat . no . KpWC280
for turning platform
•Circle, diameter 280 cm, black plate (two-piece);
€ 440 cat . no . KpbC280
for turning platform
•Circle, diameter 100 cm, white plate;
€ 180cat . no . KpWC100
for turning platform with low Set Khtpn, for Cube, for mushroom
•Circle, diameter 100 cm, black plate;
€ 180cat . no . KpbC100
for turning platform with low Set Khtpn, for Cube, for mushroom
€ 460 cat . no . KhSSp280
54
musHroom (to support platform plate 100 cm diameter)With Mushroom (+ black or white Plate of 100 cm diameter, cat. No. KPBC100 or KPWC100), the Turning Platform is converted into a simple Turntable. Mighty turntable - with capacity of 300 kg (balanced load) .
Cost effective solution for the studios where a need of a Turntable is rare.
Or, can act as a smart supplementary accessory for the cases when the Turntables in the studio are simply not enough for some photographic order.
Due to the „rougher“ bearing of Turning Platform (Turning Platform has a capacity of 1500 kg), this configuration, i. e. Turning Platform + Mushroom, is not recommended for photographing of very tiny objects with small details (mobile phones with the display switched on, etc.).
Mushroom + 100 cm Plate + Turning Platform = powerful Turntable300 kg balanced load
€ 490 cat . no . Khtpv
55
low set (to support platform plate 100 cm diameter)Thanks to this set, not only 180 cm diameter plates can be used with Turning Platform. Low Set enables to mount also black or white 100-cm Plate (cat. No. KPBC100 or KPWC100) on the Turning Platform.
Often used when live models are photographed - 100 cm plate is more convenient for stepping in-out than the 180 cm one.
€ 88 cat . no . Khtpn
56
transparent background set witH baseCube (used in „turntable“ mode) can be easily converted for transparent background photography. Great for bottles and other transparent objects made of glass or similar materials, where counter light photography is required to show material structure.
Consists of 3 parts: 1) upper plate, 2) set of three legs, 3) lower plate. Legs to be bolted into the threaded holes in the lower plate.
laser set for platform and cube•2× Industrial Line-Laser
•Self-levelling Line-Laser (ACCU) with tripod, in case
•Laser Box enabling automatic on/off laser switching
laser box type allpoCo-04:
all the por ts are controlled together (i. e. at the same moment all the ports with lasers are switched either on or off)
4 ports for (up to) 4 Industrial Line-Lasers
•2× Tripod for Industrial Line-Laser
laser box type seppoco-20 (excHange for laser box type allpoco-04 in laser set)
laser box type SeppoCo-20:
separate por ts control
20 ports for (up to) 20 Industrial Line-Lasers or other USB devices
enables to switch any of 20 ports (i . e . 20 lasers or other uSb devices)on/off, independently one on each other, when the photo-sequence does not run .
brings advantage when more complicated laser handling is used (system of laser grids), or in co-operation with brake Support under the platform plate .
€ 360Diameter 950 mm
cat . no . Khap95aSe
€ 1 100 cat . no . KhlSp
€ 520 cat . no . KhSeppoCo20ex
57
platform plate edge support
Centering Working position
€ 110 cat . no . KhppeS
58
platform plate edge support witH electric brakingSpecial finishing of Platform Plate Edge Support for specific needs. Supporting rubbered wheel has 2 modes:
run = free rotation, and Stop = wheel is electromagnetically stopped which brakes the 180-cm or 280-cm plate of the turning platform . This elimitates even the smallest movement of a plate during exchanging of object on it (typically required whenshooting of live models). Set of 3 pieces (+ wiring) is sufficient for all standard needs. 2 sets are necessary with very heavy objects only.
automatic mode exchange - between RUN during shooting sequence/STOP after it - is controlled via laser box in SeppoCo-20 finishing .
€ 882Set of 3 pieces + wiring
cat . no . KhbSp3S
59
exchangable click-system for pvC mannequinsWhen each mannequin has it‘s own CenterinG pin (cat . no . Khthp34) pre-mounted on it‘s leg, exchanging of mannequins is matter of seconds . After adjusting of a dress, just click it on the torSo holder (cat . no . Khtht) - ready for photographing, already centered!
Adjusting of a dress on the mannequin always takes more time than photographing. So, when snaping one mannequin, few others are being prepared in the meantime. This speeds up the workflow substantially. For more comfortable work when adjusting dress on the mannequin, we recommend our rig plate For torSo holder + torSo holder (cat . nos . KhthC + Khtht
This solution, where the PVC mannequin is fixed on one leg only, brings a big advantage: It is possible to photograph even underwear and trousers (non-stretch finishing).
60
torso holder (Khtht)
+ reduction (Khthr)
+ turning platform (Khtp)
torso Holder
reduction for torso Holder
€ 280 cat . no . Khtht
€ 48 cat . no . Khthr
61
¾ mannequin prepared for centering pin – transparent
• man • woman
• kid 7 years • kid 4 years
mannequin especially adapted for CENTERING PIN to be bolted on it‘s leg. (Assembling takes appx. 10 minutes).
centering pin for ¾ mannequin
•pin for man • pin for woman
• pin for kid 7 years • pin for kid 4 years
€ 122 cat . no . Khth34m € 122 cat . no . Khth34F
€ 122 cat . no . Khth34K7 € 122 cat . no . Khth34K4
€ 62 cat . no . Khthp34m € 62 cat . no . Khthp34F
€ 62 cat . no . Khthp34K7 € 62 cat . no . Khthp34K4
62
exchange of CenterinG pin on manneQuin‘S leG takes appx . 10 minutes . therefore,
for fluent workflow, we recommend each mannequin has it‘s own CenterinG pin .
support for torso Holderonly when very heavy ClotheS are photographed - fur coats etc . (not advantageous for current work, as this disables the possibility to photograph underwear and trousers)
•support for man
• support for woman
• support for kid 7 years
• support for kid 4 years
€ 38 cat . no . KhthS34m
€ 38 cat . no . KhthS34F
€ 38 cat . no . KhthS34K7
€ 38 cat . no . KhthS34K4
63
plate for torso HolderAdjusting of a dress on the mannequin always takes more time than photographing. So, when shooting one mannequin, few others must be prepared in the meantime. For this serves the rig plate For torSo holder + torSo holder (cat . nos . KhthC + Khtht) .
background Holder set on tripodsKit for 1 background roll, including transport bag.
•2× Tripod, dimensions 124 - 390 cm
•pair of expander studs
•pair of W-2 adapters for stand
•Stand BAG-01, transport bag for the whole set
black molton background for turning platform - reeled on duralumin tube
•Special Textile Black Molton Background, size 3 m (width) x 11 m (length)
•Outer edge shaped by pinking shears, inner edge glued to duralumin tube.
•High light absorption - great for no-retouching 3D photography.
€ 50 cat . no . KhthC
€ 310 cat . no . Fyva2
€ 294 cat . no . Khmobb311d
64
paper backgrounds for platformAll colors available in 2.72 m (width) × 11 m (length) 4 colors available in 3.55 m (width) × 30 m (length)
SIZE (M) 2.72 x 11 3.55 x 30 SIZE (M) 2.72 x 11ZC1265 ZC1231ZC1292 ZC1289ZC1274 ZC1294ZC1279 ZC1233ZC1285 ZC1264ZC1291 ZC1237ZC1271 ZC1259ZC1203 ZC1295ZC1227 ZC1327 ZC1266ZC1201 ZC1234ZC1202 ZC1214ZC1228 ZC1248ZC1277 ZC1241ZC1236 ZC1226ZC1281 ZC1296ZC1287 ZC1206ZC1205 ZC1222ZC1223 ZC1280ZC1239 ZC1339 ZC1221ZC1249 ZC1284ZC1268 ZC1368 ZC1244ZC1282 ZC1382 ZC1273ZC1270 ZC1204
€ 250 cat . no . zC . . . (please see the chart below)€ 65 cat . no . zC . . .
(please see the chart below)
65
HeaVy duty rack-case for control unitsThe best „home“ for sensitive electronic devices: Control Units, Laser Box and Switch. Safe and stable in the studio as well as when travelling
•antiShoCK FiniShinG - inner part of Case hangs on Rubber Silent Blocks
•Reinforced edges
•Ready to travel whenever & promptly - front and back cover with butterfly lockers, high-quality rubber castors
•power multi-socket included (socket of PC type, i. e. suitable for any country) - included
•All the wiring inside
So many cables... And, only one leads out!
driVe-up ramp for motorbikes
€ 620 cat . no . KhrSr19
€ 110 cat . no . Khtpdrb
66
docking set for arm - part for turning platform
After the Robotic Arm has been set up to work in conjunction with the Turning Platform:
Even when the Robotic Arm is standing on its feet, it is still possible that the precise setup could be accidentally altered by the robot being knocked during the normal activity of a busy studio environment. To avoid this situation, we have developed a docking system between the Robotic Arm and the Turning Platform as an optional accessory.
The Docking Set consisting of two parts (cat. No. KHCKA for Robotic Arm side and cat. No. KHCKF for Turning Platform side).
KhCKF is to be fixed to the floor near by the turning platform .
KHCKA + KHCKF
€ 80 cat . no . KhCKF
67
CAROUsEL 5000
When cars, tractors or other larger vehicles are being photographed, the easy and safe loading and unloading of products is extremely important. With the Carousel 5000 there is no need for a crane or hoist and there are no dangerous ramps to drive up! The low profile design of our Carousel 5000 allows vehicles to simply drive on and off again.
FeatureS•Diameter 5 m
•Maximal load 4000 kg
•External engine
•Low profile design for easy drive on and out: heiGht 78 mm only
What iS inCluded•Carousel 5000
•Control Unit + AC power cable
•Motor cable (10 m) on spool
•15A motor cable (10 m) on spool
•BASIP software license
€ 17 400 cat . no . KhCarouSel5000
68
CAROUSEL 5000 WITH BLACK CARPET (at extra charge, cat. No. KHCARB2)
optional aCCeSSory
black carpet & Velcro fastener set, for 2x coating
Set consisting of carpet reel and velcro fasteners. Sufficient for 2 times coating of Carousel 5000 with a black carpet.
€ 420 KhCarb2
69
HeaVy duty rack-case for control unitsThe best „home“ for sensitive electronic devices: Control Units, Laser Box and Switch. Safe and stable in the studio as well as when travelling
•antiShoCK FiniShinG - inner part of Case hangs on Rubber Silent Blocks
•Reinforced edges
•Ready to travel whenever & promptly - front and back cover with butterfly lockers, high-quality rubber castors
•power multi-socket included (socket of PC type, i. e. suitable for any country) - included
•All the wiring inside
So many cables... And, only one leads out!
€ 620 cat . no . KhrSr19
70
RObOTIC ARM(v7)
The basic model of our vertical photography robots.
The Robotic Arm can be used in conjunction with the majority of our horizontal photography units: Robotic Turntable, Robotic Turntable Kit, Centreless Table, Centreless Table Kit, Cube operating inside of Tent Table Kit (with Diffusion Tent removed), Turning Platform
With these combinations, you will be able to photograph the product from all the views, and at whatever angle you wish!
FeatureS•Possibility of taking Picture in „landscape“ as well as „portrait“ camera position
•Hydraulically adjustable height
•Easy to relocate using castors, fixing new position by switching on feet with a hand lever
•Suitable for any camera model with a tripod mount (up to 6 kg), set by counterweights
•We recommend Manfrotto 405 head (as extra accessory)
•Laser positioning (at extra charge, cat. No. KHLSA)
•Two shanks included – standard and long
What iS inCluded•Robotic Arm
•Standard shank, max. length 1350 mm
•Long shank, max. length 3100 mm
•Set of counterweights
•Control Unit + AC power cable
•Motor cable (10 m) on spool
•BASIP software license
€ 5 000 cat . no . Khra
71
optional aCCeSSory
docking set for arm - part for armAfter the Robotic Arm has been set up to work in conjunction with the Robotic Table (any of Fotorobot.cz Tables), or with the Turning Platform:
Even when the Robotic Arm is standing on its feet, it is still possible that the precise setup could be accidentally altered by the robot being knocked during the normal activity of a busy studio environment. To avoid this situation, we have developed a docking system between the Robotic Arm and the Robotic Table/Turning Platform as an optional accessory.
The Docking Set consisting of two parts (cat. No. KHCKA for Robotic Arm side and cat. No. KHCKT for Robotic Table/KHCKF for Turning Platform side).
KHCKA + KHCKT KHCKA + KHCKF
€ 80 cat . no . KhCKa
72
laser for arm
€ 140 cat . no . KhlSa
73
manfrotto 405 geared HeadSpeed and digital precision are paramount in the latest 405 Pro Digital Geared Head, the 405 provides ideal support and fast, pinpoint positioning for professional medium format cameras with conventional or digital backs. The 405 Pro Digital Geared Head was designed specifically to meet the more exacting, time-sensitive needs of busy professional digital photographers who shoot with medium format or 35 mm camera/back with payloads up to 7.5 Kg. It utilizes large, easy-to-grip knobs that provide smooth, positive, geared control through 360° pan and +90° -30° frontal and lateral tilt. In addition to its 3-D geared functions, the 405 also incorporates a unique feature that allows you to instantly disengage the gears and rough position the camera by hand, then instantly reengage them for ultra-precise final alignment. Camera attachment: 1/4” + 3/8” screw. PATENTED
€ 380 cat . no . Fym405
74
RObOTIC ARM(v3)
The basic model of our vertical photography robots.
The Robotic Arm can be used in conjunction with the majority of our horizontal photography units: Robotic Turntable, Robotic Turntable Kit, Centreless Table, Centreless Table Kit, Cube operating inside of Tent Table Kit (with Diffusion Tent removed), Turning Platform
With these combinations, you will be able to photograph the product from all the views, and at whatever angle you wish!
FeatureS•Hydraulically adjustable height
•Suitable for any camera model with a tripod mount (up to 6 kg), set by counterweights
•We recommend Manfrotto 405 head (as extra accessory)
•Two shanks included – standard and long
What iS inCluded•Robotic Arm
•Standard shank, max. length 1350 mm
•Long shank, max. length 3100 mm
•Set of counterweights
•Control Unit + AC power cable
•Motor cable (10 m) on spool
•BASIP software license
€ 4 500 cat . no . Khrav3
75
vARIO Brings the highest level of sophistication and functionality to 3D photography. Thanks to 3 stepper motors, it simulates the movements of the human arm, having a shoulder, an elbow and a wrist. In this way, finding the right camera position is extremely quick and easy. Furthermore, it saves money on buying telephoto lens equipment, as allows the lens to get as close to the object as needed.
With exception of photography inside the Diffusion Tent, the Vario can be added to many of our horizontal photography units: Robotic Turntable Kit, Centreless Table Kit, Cube operating inside of Tent Table Kit (with Diffusion Tent removed).
there is necessary to have side stemples type h on the table, to carry vario S . With these combinations, you will be able to photograph the product from all the views, and at whatever angle your wish! (With Cube in suspension mode, accessible angles are limited by nylons used for suspension of object).
FeatureS•Can be combined with Robotic Turntable Kit, Centerless Table Kit, Cube operating inside of Tent \table Kit (with Diffusion Tent removed)
•Reinforced finishing of frame portal to type “H” necessary
•Very easy and precise positioning of distance of camera lens from the object and centre of camera rotation
What iS inCluded•Vario
•Control Unit + AC power cable
•Motor cable (3 x 5 m)
•BASIP software license
€ 9 650 cat . no . KhvarioS
76
Closer-farther (a), up-down (b). Quick&precise SOFTWARE ADJUSTING to any position.
Not mechanical like with Robotic Arm cat. No. KHRA.
VARIO S on Robotic Turntable Kit
77
vARIO XLThis robot is the big brother of Vario, with the 3 stepper motor design, it brings the same advantages, but it is designed for shooting large objects. Operating range 240 cm.
However, it has two more excellent features:
- Thanks to the ability of the whole Vario xL being able to rotate on its base, this robot can stand in the middle of the room, surrounded by up to 4 workplaces being equipped by horizontal units. For example by Turning Platforms (KHTP1500). This is extremely useful when photographing fashion on live models, with various scene setups. Once the photography sequence of the model on workplace No. 1 (e. g. Turning Platform No. 1) has been completed, Vario xL is immediately moved by 90 degrees to workplace No. 2 (e. g. Turning Platform No. 2), shooting using this method saves time, as while the models on the other workplaces (e. g. Platforms No. 3 and 4) are being dressed and styled, the Vario xL can turn and continue to work on the next workplace (next Turning Platform)…
- Vario xL can also be used in photographic studios as a precise camera crane, when high objects have to be photographed – this again, saves money on buying special equipment for this purpose.
FeatureS•Can be combined with Turning Platform and Carousel 5000
•Can also work as a precise camera crane
What iS inCluded•Vario xL
•Control Unit + AC power cable
•Motor cable (3 x 5 m)
•BASIP software license
€ 12 600 cat . no . Khvarioxl
78
optional aCCeSSory
HeaVy duty rack-case for control unitsThe best „home“ for sensitive electronic devices: Control Units, Laser Box and Switch. Safe and stable in the studio as well as when travelling
•antiShoCK FiniShinG - inner part of Case hangs on Rubber Silent Blocks
•Reinforced edges
•Ready to travel whenever & promptly - front and back cover with butterfly lockers, high-quality rubber castors
•power multi-socket included (socket of PC type, i. e. suitable for any country) - included
•All the wiring inside
So many cables... And, only one leads out!
€ 620 cat . no . KhrSr19
79
MULTICAM bOw4 cameras shooting at once - this is Fotorobot.cz Multicam capture. At one moment, you can take 4 pictures instead of 1.
FeatureS•Adds upviews to any of Fotorobot.cz Table Kits
•Saves costs when still the same upview angles are requested
•Fixed positions of cameras: upview angles 0°, 30°, 60°, 90°
•4 cameras shooting at one moment
•= ¼ time spent
•= 4x more objects captured
•= 4x higher productivity
•= 4x higher profitability
•Prepared for 4 pieces of Manfrotto 405 heads (heads at extra charge, cat. No. FYM405)
•Prepared for Tower Stand Manfrotto 816 (stand at extra charge, cat. No. FYM816)
What iS inCluded•Multicam Bow
•Central Pin for docking of Bow on Table portal
•Wiring
•BASIP software license
€ 1 550 cat . no . Khmb
80
optional aCCeSSory
manfrotto 405 geared Head
tower stand super salon 230 (manfrotto 816/1)Has a 8 cm diameter black anodised aluminium column with a working height of 221 cm provided with an adjust-able counter-balanced sliding horizontal 80 cm crossarm. The camera support platform allows movement in a solid angle of 360°. Large sized wheels in the heavy cast base and single pedal control facilitate easy positioning and quick, rock steady locking. The crossarm support casting features a built-in accessory tray 33x28cm. Supplied complete with camera support platform and counter-balanced crossarm. Load capacity 15 kg. Total weight 84 kg.
MULTICAM CAPTURE WORKSTATION: 4 cameras shooting at one moment - 4 pictures instead of 1
€ 380 cat . no . Fym405
€ 2 650 cat . no . Fym816
81
RECOMMEndEd CAMERAs
Due to the local support we do not deliver camera itself. Studio can use own camera, or we help our client to choose best-fitting model for him.
ConSiderationS• Image resolution
•Chip quality
•Cost of camera and its servicing due to the high number of pictures taken)
reCommended modelS
canon camerasWe support all Canon cameras which use EDSDK (EOS Digital Camera Software Development Kit) in proper version
•EOS-1D Mark II
•EOS 20D
•EOS-1Ds Mark II
•EOS Kiss Digital N / 350D / Rebel xT
•EOS 5D (12 MPx, good ratio price/value),(cannot be used with Mac OS x 10.5.)
•EOS-1D Mark II N
•EOS 30D (8 MPx, cost effective model)
•EOS 400D /Rebel xTi / Kiss Digital x
•EOS-1D Mark III
•EOS 40D
•EOS-1Ds Mark III (21 MPx, top model)
•EOS DIGITAL Rebel xsi / 450D / Kiss x2
•EOS DIGITAL Rebel xS / 1000D / Kiss F
•EOS 50D
•EOS 5D Mark II
•EOS 500D / EOS Rebel T1i / EOS Kiss x3
•EOS 7D
•EOS 60D
•EOS-1D Mark IV
•EOS 530D / EOS Rebel T2i / EOS Kiss x4
•EOS 600D / EOS Rebel T3i / EOS Kiss x5
•EOS 1100D / EOS Rebel T3 / EOS Kiss x50
•EOS Kiss x4/EOS REBEL T2i /EOS 550D
•EOS 5D Mark III
•EOS 1D x
82
(now, Canon EOS SDK v. 2.11 is integrated into FotoRobot operation software BASIP)
Upon our testing experience, we know that the FotoRobot system may work with unlisted models as well. The prior test, however, is always necessary.
Note: Rebel and Kiss are brand names used in USA
nikon camerasWe support all Nikon cameras which use EDSDK (EOS Digital Camera Software Development Kit) in proper version
For example:
•D 3
•D 3s
•D 3x
•D 300
•D 300s
•D 5000
•D 5100
•D 700
•D 7000
•D 90
•D 4
•D 600
otHer camerasFotoRobot software controls cameras compatible with WIA (Windows Image Acquisition) interface
For cameras without WIA compatibility (e.g. Hasselblad cameras with CaptureOne backs) – we use original remote-shutter control which we customize to fit FotoRobot’s Control Unit
! CAUTION – camera must include “Take Picture” command. For example: most Nikon cameras support it (excluding D100 where mentioned command not included, for instance).
83
Camera aCCeSSorieS
radio sHutter release – canon, nikon & otHer camerasAny camera equipped with proper connector can be operated by BASIP using radio shutter release. NO cables, NO problems!
We produce custom-made solution (to connect Control Unit with transmitter and camera with receiver) operated by 4-channels wireless radio system Hähnel – as substitution of cable-shutters.
Ready-made radio shutter release is available for Canon and Nikon cameras. Other camera brands upon request.
radio sHutter release – all canon camerasRadio wireless shutter release, for Canon cameras, based on Hähnel transmitter and receiver. Equipped with connector for Control Unit on transmitter side and Canon shutter connectors on receiver side.
radio sHutter release – all nikon camerasRadio wireless shutter release, for all Nikon cameras, based on Hähnel transmitter and receiver. Equipped with connector for Control Unit on transmitter side and Nikon shutter connectors on receiver side.
€ 120 cat . no . FytrSCu
€ 120 cat . no . FytrSnu
84
3-Hub for radio sHutter release (for 3 control units)Hub for 3 Control Units, for all Radio and Cable Shutter-Releases.
Applying this hub, the camera shutter release (cable or radio) can be used by any Control Unit without re-connecting of its connector to another Unit. Using more than one Control Unit, this hub is highly time-saving.
Link 3 up to Control Units to 1 shutter release.
foot pedal control set (for control unit)Extension of Control Unit. When the robotized workplace is really used to its full capacity, each second is precious. For the most routine robot control operations, Foot Pedal Control saves time - operating personnel does not need to walk between the robot with the snapped object and the PC with control program (Basip).
It is possible to program up to 4 operations (4 buttons on Foot Pedals). Most typically „Turn the robot by 1 step“, „Take a snap (shutter release)“, „Switch the lasers on/off“... We offer buttons programming as per your request.
€ 54 cat . no . Fyhub3S
€ 88 cat . no . KhFpC2
85
OTHER ACCEssORIEsnetWorK SWitCheS
network switcHConnection between Control Unit (Black-Box) and PC operating all the system is using LAN. In common configuration several Control Units connected to 1 PC. To connect all this stuff together and to LAN local switch is required.
D-Link DES-1008D 8 Port 10/100 Desktop Switch
Simple desktop version of LAN switch good for Black-Boxes installed without rack-system or for space-saving configuration.
d-link des-1008d 8 port 10/100 desktop switcHSimple desktop version of LAN switch good for Control units (Black-Boxes) installed without rack-system or for space-saving configuration
2-m TP cable included.
edimax es-3116rl, 16 port 10/100 19” rack switcH19” rack-mounted switch – great for installation in Robotic Turntable (KHRT / KHRTKIT) or Heavy Duty Mobile Rack (KHRSR19)
2-m TP cable included.
€ 38 cat . no . itdeS1008d
€ 49 cat . no . iteS3116rl
86
poWer CablePower cables delivered with robots are designed for French plugs. In case of different regional plug standards, matching power cable must be provided by a buyer.. The Control Unit - to be connected to 230 V AC electricity - is equipped with a standard PC socket, please see the picture.
! CAUTION – other than 115V or 230V systems has to be announced in advance by client - to deliver special Black-Box version.
Spare motor CableSEach robot is connected to the Control Unit with a special Motor Cable.
To avoid stopping of your work due to accidental motor cable damage (mechanical cut in the busy photo studio), we recommend to buy a spare motor cable together with your robot.
€ 126 Spare motor cable 15 a
cat . no . KhmC1015
€ 68 Spare motor cable 5 a
cat . no . KhmC1005
87
uni-clamp pin•With M8 thread to be easily screwed into the threaded holes being prepared on many places of robots, to hold Uni-clamp sockets
uni-clamp socket•With M8 thread to be easily screwed into the threaded holes being prepared on many places of robots, to hold Uni-clamp accessories with
Uni-clamp pins
€ 5 cat . no . Kh7360
€ 10 cat . no . Kh7361
88
TRAInInG, sUPPORT & TRAnsPORT
traininG at Client’S SiteFull-service preferable for bigger companies, where numerous staff is to be trained. Standard training language is English.
robot installation & setup•unpacking, plugging, setting-up of robots
•software installation & network connection
•camera setup
• introduction to robot operation
installations containing Carousel 5000, vario S or vario xl need 3 instructors, cat . no . trSC3
other installations - 2 instructors, cat . no . trSC2
pHoto & data post-processing training•camera, flash-meter, scene setup, image enhancement, color management, studio lighting setup and maintenance
• image post-processing
•3D-pictures publishing
Client is to specify his requirements in advance.
Matters to be specified:
•client’s IT and Photo erudition level
•kind of photographed objects
•special requirements – if any
Consecutive training to “robot installation & Setup“ - 2 instructors
extra training (not consecutive training to “robot installation & Setup“) - 1 or 2 instructors
€ 1 000cat . no . trSC2
+ accommodation of 2 instructors for 2 nights at client’s expenses
€ 1 250cat . no . trSC3
+ accommodation of 3 instructors for 2 nights at client’s expenses
€ 1 000cat . no . trpCC2
+ accommodation of 2 instructors for 1 additional night at client’s expensess
€ 750cat . no . trpCe1
+ travel costs + acommodation of 1 instructor for 2 nights at client’s expenses
€ 1 000cat . no . trpCe2
+ travel costs + acommodation of 2 instructors for 2 nights at client’s expenses
89
traininG at Fotorobot .Cz StudioGreat for clients who want to finalize accessories best suitable for their needs (because all is available in fotorobot studio for testing), also preferable for clients from longer distances, where most economical variant is fly (or drive) to Prague, spend few days here (best way combined with sight-seeing), get detailed knowledge of robots and later receive tailor-made delivery by forwarding agent.
training How to do “robot installation and setup” by yourselfTraining is performed at robots installed at fotorobot.cz studio – assembly of machines is mentioned theoretically, client is ready to perform TRRTC at his studio by himself, event. using manual.
If client bring his computer (that will be used in future with fotorobot), BASIP software is installed and machines configured to perform training at clients-identical hardware (and this configuration will use client later in his studio)
• Introduction to robot operation
•0,5 day
pHoto & data post-processing training•camera, flash-meter, scene setup, image enhancement, color management, studio lighting setup and maintenance
• image post-processing
•3D-pictures publishing
1 day
€ 400 cat . no . trrtS
€ 800 cat . no . trrptS
90
Standard Warranty & Support
standard Hardware warranty•FotoRobot.cz® equipment comes with a standard
12-month warranty which covers against material defects and manufacturing faults.
•The Standard Warranty is a “Return To Base” warranty, and the return shipping costs must be met by the buyer.
all returnS muSt be Sent to FolloWinG addreSS:
improtech s.r.o., Service Dept. Topolova 483 250 67 Klecany Czech Republic
Before returning equipment, the buyer must contact the supplier to ascertain whether it is feasible to solve the fault/s by other means (for example remotely, or by sending of spare parts etc.). In the event that the fault cannot be rectified in this way, then the supplier will give an authority to return the equipment for repair.
We will endeavour to repair the product as quickly as possible, but not later than 40 days after receipt.
standard software warrantyThe BASIP® control software comes with a standard 12-month warranty. This does not include access to BASIP® software updates, which are necessary to gain support for new camera models.
91
premium Warranty & SupportIn addition to our Standard Hardware Warranty and Standard Software Warranty, we also offer our customers an extended service through our Premium Warranty & Support. This ensures your FotoRobot.cz® system is always up-to-date, reliable and operating at maximum efficiency in daily operation. Premium Warranty & Support is the best way to get the optimum performance from your FotoRobot.cz® system and to ensure maximum productivity.
premium warranty & support consists of:
extended warranty•Continued warranty for manufacturing and material faults.
V.i.p. emergency support•If your equipment fails (for any reason) we react immediately. If the problem can not be solved remotely, we send replacement hardware immediately. Therefore you can continue to work, whilst we undertake fault finding, diagnosis and rectification of your equipment in the background.
•Telephone/e-mail support for situations where you need advice regarding operational problems which may occur using FotoRobot.cz® equipment, as well as tips and advice regarding photographing unusual objects.
free - additional products and serVice (otHerwise cHargeable)•BASIP® software updates, including improvements, new features and added support for new camera models.
duration of premium warranty & supportThe charge for the Premium Warranty & Support is payable annually in advance.
price of premium warranty & support (pskH)• ”10%” mode – Where PSKH is included with the original equipment purchase and renewed annually without interruption. The price is based
on 10% of the catalogue price of the machines annually.
• ”20%” mode – Where PSKH is not included with the original equipment purchase, or in the case of an annual renewal, the renewal is allowed to lapse and the renewal fee is paid later than the anniversary of the previous PSKH. The price is based on 20% of the catalogue price of the machines annually.
• ”PSKH impossible” mode – Where PSKH is not taken up within 24 months after the original equipment purchase, or in case of annual renewal, the cover has been allowed to lapse for more than 24 months. In this case, it is not possible to take out PSKH anymore, although, we still offer our paid services (BASIP® software updates, hire of Spare Control Units etc).
pleaSe note The price of PSKH is calculated on the catalogue price of the robotic equipment only, not on ancillary equipment, accessories or services etc. Such equipment is defined as those having their own Control Units. The exception is the Robotic Turntable Kit (cat. No. KHRTKIT, price EUR 5750) where the base price for PSKH calculation is EUR 4450, i.e. excluding ancillaries and accessories.
10 % cat . no . pSKh
92
COnTACTsREGISTERED OFFICE STUDIO - PLACE OF VISITS - POSTAL ADDRESS
improtech s.r.o.U Vysocanskeho pivovaru 3190 00 PragueCzech Republic
improtech s.r.o.Topolova 483250 67 KlecanyCzech Republic
SALES SALES
SOFTWARE HARDWARE AND ROBOTS DEVELOPMENT
Mr. Jan [email protected]: +420 724 092 506Skype: jan.g.tomas
Ms. Petra [email protected]: +420 775 312 775Skype: petra.lee.borovkova
Ms. Hana [email protected]: +420 724 023 685Skype: Hana.Mrackova
Mr. Daniel [email protected]: +420 266 190 163
Mr. Kamil [email protected]:+420 608 710 158
GPS:50° 10‘ 40.61“ N14° 25‘ 09.40“ E
93