price guide 2010 2010 price guide r1.1.pdf · price guide 2010 quality speed ... stud track 0.50...
TRANSCRIPT
PRICE GUIDE 2010
Quality Speed
Experience
Specialised Stud Systems Pty Ltd
1300 88 3278
Specialised Stud Systems was established in 1996 to
supply the construction industry with quality rollformed steel building products and has gained a wealth of experience as specialists in this field. Because the organisation revolves around customer needs, Specialised Stud Systems is dedicated to offering quality products with fast, reliable, personalised service supported with technical and engineering information. We are committed to fulfilling the most challenging of customer requirements and we are constantly seeking to introduce and implement innovative, viable systems for the construction industry. This Price List is submitted to you with our compliments.
Prices subject to change without notice. E&OE This Price List is not to be reproduced in any form without
written permission from Specialised Stud Systems
CONTENTS PRICE LIST EFFECTIVE 1/8/10
INTRODUCTION01 Marketing and Pricing Policy02 Quality Assurance / Warranty
36 MDF Stop Ends36 Tapes
05 Stud & Track 0 50 0 55 BMT 36 Plasterboard Compounds
PLASTERING ACCESSORIES & TOOLS
STEEL STUD WALL SYSTEMS
INTRODUCTION
PRICE LIST EFFECTIVE 1/8/10
05 Stud & Track 0.50 ‐ 0.55 BMT 36 Plasterboard Compounds06 Stud & Track 0.75 BMT 37 Sealants and Adhesives07 Stud & Track 1.15 BMT 38 Abrasives08 Stud & Track 1.50 BMT 38 Dust Masks08 Shaftwall One Way Erected System 39 Collapsible Scaffold and Miscellaneous Tools08 Noggings & Nogging Track09 Nogging Brackets09 Curved Track 40 Framing Screws09 Flexitraxx ‐ Flexible Track for Curved Walls 40 Plasterboard Screws ‐ Loose & Collated
& Bulkheads 41 Fibre Cement Screws ‐ Loose & Collated
PLASTERING ACCESSORIES & TOOLS
STEEL STUD WALL SYSTEMS
INTRODUCTION
FASTENERS
PRICE LIST EFFECTIVE 1/8/10
& Bulkheads 41 Fibre Cement Screws ‐ Loose & Collated10 Stud Wall Accessories 41 Roofing Screws
Brackets, Brace Strapping & Staggered stud clips 41 Extended Drill Point Screws (Series 500)11 Stud Wall Accessories 42 Ceiling Suspension Anchors
Gal Sheet & Mesh, Backing Strips & Tools 42 Booker Rod, Bolts, Nuts and Washers42 Staples42 Masonbolts
12 Concealed Ceiling Systems 43 Metal Pin Anchors15 Slimceil™ ‐ Low Clearance Ceiling Systems 43 Nail In Plugs & Wall Plugs16 Exposed Grid Ceiling System & Ceiling Tiles 43 Rivets
PLASTERING ACCESSORIES & TOOLS
SO SO O S S S
CEILING SYSTEMS
STEEL STUD WALL SYSTEMS
INTRODUCTION
FASTENERS
PRICE LIST EFFECTIVE 1/8/10
p g y g43 Drill Bits44 Phillips & Hex Bits
18 Resilmounts 44 Cut Off & Grinding Wheels18 Acoustic Brackets 45 Ramset Trakfast™ and Trackmaster™18 Wave Bar ‐ Flexible Noise Barrier 45 Macsim M2 Tracker
19 Ceiling / Roof Battens 46 Metal Sections for Hebel® Systems20 Top Hat Purlins 46 Hebel® Fasteners
PLASTERING ACCESSORIES & TOOLS
SOUND ISOLATION SYSTEMS
CEILING SYSTEMS
STEEL STUD WALL SYSTEMS
INTRODUCTION
G SS OO S O
TOP HATS & PURLINS
FASTENERS
PRICE LIST EFFECTIVE 1/8/10
HEBEL® ACCESSORIES
21 Top Hat Junction Studs22 Top Hat Brackets23 C and Z Purlins 47 Thermal Wall & Ceiling Batts
47 Anticon™ Roofing Blanket48 Thermo Acoustic 48 Supertel48 Partition Batts
24 Plasterboard Metal Accessories 48 Soundscreen Plus (Rockwool)25 Backing Angles26 PVC Finishing Sections
PLASTERING ACCESSORIES & TOOLS
PLASTERBOARD FINISHINGSECTIONS
SOUND ISOLATION SYSTEMS
CEILING SYSTEMS
STEEL STUD WALL SYSTEMS
INTRODUCTION
POLYESTER INSULATION
GLASSWOOL INSULATION
TOP HATS & PURLINS
FASTENERS
PRICE LIST EFFECTIVE 1/8/10
HEBEL® ACCESSORIES
26 PVC Finishing Sections27 Shadowmax™ for Shadowline Detail 49 Thermal Wall & Ceiling Batts27 Skirting and Flat Bar 49 Acoustic / Thermal Batts28 EZY Finishing Sections 49 Sound Blanket
EZY cap™, EZY reveal™, fastcap® and cavkit® 50 Ceiling Baffle50 Acoustic Absorption Blanket
METAL DOOR FRAMES 51 Polymax ABSORB30 EZY Jamb® 51 Polymax PRIME32 Pressed Metal Door Frames
PLASTERING ACCESSORIES & TOOLS
CC SS S
METAL DOOR FRAMES
PLASTERBOARD FINISHINGSECTIONS
SOUND ISOLATION SYSTEMS
CEILING SYSTEMS
STEEL STUD WALL SYSTEMS
INTRODUCTION
REFLECTIVE INSULATION
POLYESTER INSULATION
GLASSWOOL INSULATION
TOP HATS & PURLINS
FASTENERS
PRICE LIST EFFECTIVE 1/8/10
HEBEL® ACCESSORIES
52 Aircell33 MDF ‐ Non rated & sound rated34 METAL ‐ Non rated & sound rated35 Fire Rated 53 Sarking ‐ Heavy & Medium Duty
35 Tile and Spa Panels35 Aluminium Manhole Frames
54 Material Safety & Data Sheet
55 Terms and Conditions of Sale
PLASTERING ACCESSORIES & TOOLS
ACCESS PANELS
METAL DOOR FRAMES
PLASTERBOARD FINISHINGSECTIONS
SOUND ISOLATION SYSTEMS
CEILING SYSTEMS
STEEL STUD WALL SYSTEMS
INTRODUCTION
REFLECTIVE INSULATION
POLYESTER INSULATION
GLASSWOOL INSULATION
SISILATION / SARKING
APPENDIXINSULATION
TOP HATS & PURLINS
FASTENERS
PRICE LIST EFFECTIVE 1/8/10
HEBEL® ACCESSORIES
WARRANTY
Refer to Terms and Conditions of sale.
QUALITY ASSURANCE
Quality Assurance / Warranty
Note that mixing of different manufacturer's products within a ceiling or wall system will void any warranty.
Faststud is the NSW Distributor for Studco Building Systems. As such the majority of products listed are supplied by Studco. Studco is a Quality Assured Company.
PAGE 1PAGE 1
Sydney Metro Zone ‐ Refer map below $75.00All other areas P.O.A.*Orders of Glasswool, Polyester, and Aircell insulation will generally be supplied direct from manufacturer independently of
any other products from Faststud. Likewise the delivery charges will be treated independently.
Sydney Metro Zone (Refer map below)
Next day delivery or same day if ordered by 9am $50.00Same day delivery if ordered after 9am $85.00*Deliveries required before 7am or after 3pm will incur a surcharge. Contact our office for details.
Central Coast ‐ NewcastleScheduled Run ‐ Tuesday & Thursday each week. Delivery between 7am & 3pm. $50.00Non Scheduled ‐ Delivery outside scheduled days or required at specified time. $150.00*For details on scheduled run zone please contact our office.
Wollongong ‐ NowraScheduled Run ‐ Wednesday each week. Delivery between 7am & 3pm. $50.00Non Scheduled ‐ Delivery outside scheduled days or required at specified time. $150.00
Marketing & Pricing Policy
Delivery ‐ Insulation
Delivery ‐ All other products
ALL PRODUCTS ARE SOLD IN ACCORDANCE WITH OUR STANDARD TERMS AND CONDITIONS
PAGE 2
y y q p $*For details on scheduled run zone please contact our office.
All other areas & deliveries outside of Faststud standard delivery times. P.O.A.
SYDNEY METROZONE
PAGE 2
DEMURRAGE
BACK ORDERS
RE‐DELIVERIES
SPECIAL ORDERS
All special orders will be billed within 30 days of date ready for despatch. Storage fees may apply if goods are not picked up or delivered within the 30 day period.
Sydney Metro: No delivery charge for standard stock items. Standard delivery charge will apply to non standard products and special orders.
Marketing & Pricing Policy
Outside Sydney Metro: Delivery charges will apply for both standard and non standard products. Order early to avoid these charges.
If goods have to be returned to store for re‐delivery due to the customer not meeting any obligations made at the time of order, the customer will be charged for the cartage of the original delivery, the cartage for return to store and the later re‐delivery.
Special size products e.g. Studs, Furring Channels, etc. are available from FASTSTUD provided that the minimum quantity is a stock pack size for the product concerned. A written confirmation of the purchase order is required before manufacturing.
A charge of $60.00 per hour may be charged after the first 30 minutes of waiting time
PAGE 3
PACKAGING
GOODS & SERVICES TAXFASTSTUD is registered for GST. All prices in this book exclude GST.
With few exceptions, FASTSTUD products are packed in workable quantities of stock packs and sub packs. In such cases, minimum quantities sold are limited to sub packs.
PAGE 3
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
51SS24 Stud 51mm 2400 100 10 9.40 3.92 1.30051SS27 2700 100 10 10.61 3.93 1.46051SS30 3000 100 10 11.76 3.92 1.63051SS33 * 3300 100 10 12.94 3.93 1.79051SS36 3600 100 10 14.13 3.93 1.95064SS24 Stud 64mm 2400 100 10 8.29 3.46 1.43064SS27 2700 100 10 9.30 3.45 1.61064SS30 3000 100 10 10.35 3.45 1.79064SS33 * 3300 100 10 11.37 3.45 1.97064SS36 3600 100 10 12.43 3.46 2.15064SS42 4200 100 10 14.52 3.46 2.500
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
76SS24 Stud 76mm 2400 100 10 10.53 4.39 1.71076SS27 2700 100 10 11.85 4.39 1.95076SS30 3000 100 10 13.14 4.38 2.17076SS33 * 3300 100 10 14.48 4.39 2.35076SS36 3600 100 10 15.80 4.39 2.61076SS42 4200 100 10 18.41 4.39 3.04076SS48 4800 100 10 21.06 4.39 3.41076SS60 6000 100 10 26.29 4.39 4.270
STEEL STUD WALL SYSTEMSWALL STUD 0.50 BMT
WALL STUD 0.55 BMT
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
76SS60 6000 100 10 26.29 4.39 4.27092SS24 Stud 92mm 2400 100 10 12.03 5.02 1.91092SS27 2700 100 10 13.49 5.00 2.15092SS30 3000 100 10 15.04 5.02 2.39092SS33 * 3300 100 10 16.54 5.02 2.63092SS36 3600 100 10 18.05 5.02 2.87092SS42 4200 100 10 21.06 5.02 3.35092SS48 4800 100 10 24.04 5.01 3.83092SS60 6000 100 10 30.05 5.01 4.780
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
51ST30 Track 51mm x 32mm 3000 100 10 10.31 3.44 1.44064ST30 Track 64mm x 28mm with hem 3000 100 10 9.92 3.31 1.60076ST30 Track 76mm x 28mm with hem 3000 100 10 11.02 3.68 1.92092ST30 Track 92mm x 28mm with hem 3000 100 10 13.05 4.35 2.130
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
64SDHT30 DHT 64mm x 50mm 3000 100 10 16.80 5.60 2.31076SDHT30 DHT 76mm x 50mm 3000 100 10 17.83 5.95 2.48092SDHT30 DHT 92mm x 50mm 3000 100 10 19.39 6.47 2.720
TOP & BOTTOM TRACK 0.50 BMT
DEFLECTION HEAD TRACK 0.55 BMT
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Wall Track Deflection Track Wall Stud
* Denotes lead times and minimum order quantity may apply PAGE 5
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
51HS27 * Stud 51mm Load Bearing 3000 100 10 15.05 5.02 2.11051HS30 3000 100 10 16.70 5.57 2.34064HS24 Stud 64mm Load Bearing 2400 100 10 15.14 6.31 2.14064HS27 2700 100 10 17.03 6.31 2.41064HS30 3000 100 10 18.92 6.31 2.67064HS36 3600 100 10 22.68 6.30 3.21064HS42 4200 100 10 26.47 6.31 3.74064HS48 4800 100 10 30.23 6.30 4.28064HS60 6000 100 10 37.81 6.31 5.35076HS24 Stud 76mm Load Bearing 2400 100 10 16.33 6.81 2.33076HS27 2700 100 10 18.39 6.82 2.61076HS30 3000 100 10 20.45 6.82 2.90076HS36 3600 100 10 24.52 6.82 3.48076HS42 4200 100 10 28.65 6.83 4.05076HS48 4800 100 10 32.72 6.82 4.63076HS60 6000 100 10 40.86 6.81 5.80092HS24 Stud 92mm Load Bearing 2400 100 10 17.76 7.40 2.55092HS27 2700 100 10 20.02 7.42 2.87092HS30 3000 100 10 22.24 7.42 3.19092HS36 3600 100 10 26.70 7.42 3.83092HS42 4200 100 10 31.13 7.42 4.47092HS48 4800 100 10 35.59 7.42 5.11092HS60 6000 100 10 44.47 7.42 6.390150HS36 Stud 150mm Load Bearing 3600 100 10 46.00 12.78 4.980150HS42 4200 100 10 53.63 12.77 5.810150HS48 4800 100 10 61.33 12.78 6.640
WALL STUD 0.75 BMT
150HS48 4800 100 10 61.33 12.78 6.640150HS60 6000 100 10 76.68 12.78 8.290150HS72 7200 100 10 91.99 12.78 9.950
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
51HT30 * Track 51mm x 32mm 3000 100 10 15.42 5.14 2.11064HT30 Track 64mm x 28mm with hem 3000 100 10 17.46 5.82 2.34076HT30 Track 76mm x 28mm with hem 3000 100 10 18.51 6.17 2.57092HT30 Track 92mm x 28mm with hem 3000 100 10 20.66 6.89 2.860150HT30 Track 150mm x 32mm 3000 100 10 31.09 10.37 3.990
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
51HDHT30 * DHT 51mm x 50mm 3000 100 10 17.23 5.75 2.80064HDHT30 DHT 64mm x 48mm with hem 3000 100 10 19.90 6.64 3.02076HDHT30 DHT 76mm x 48mm with hem 3000 50 10 21.04 7.02 3.21092HDHT30 DHT 92mm x 48mm with hem 3000 100 10 22.97 7.66 3.540150HDHT30 DHT 150mm x 50mm 3000 100 10 34.05 11.35 4.640
TOP & BOTTOM TRACK 0.75 BMT
DEFLECTION HEAD TRACK 0.75 BMT
Wall Track Deflection Track Wall Stud
* Denotes lead times and minimum order quantity may apply PAGE 6
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
64XHS27 Stud 64mm Load Bearing 2700 100 10 21.88 8.11 3.39064XHS30 3000 100 10 24.34 8.12 3.79064XHS36 3600 100 10 29.16 8.10 4.52064XHS42 4200 100 10 34.03 8.11 5.28064XHS48 4800 100 10 38.89 8.11 6.03064XHS60 6000 100 10 48.59 8.10 7.580
76XHS24 Stud 76mm Load Bearing 2400 100 10 20.95 8.73 3.30076XHS27 2700 100 10 23.55 8.73 3.71076XHS30 3000 100 10 26.20 8.74 4.13076XHS36 3600 100 10 31.42 8.73 4.95076XHS42 4200 100 10 36.65 8.73 5.78076XHS48 4800 100 10 41.92 8.74 6.60076XHS60 6000 100 10 52.36 8.73 8.250
92XHS27 Stud 92mm Load Bearing 2700 100 10 25.98 9.63 4.11092XHS30 3000 100 10 28.85 9.62 4.57092XHS36 3600 100 10 34.59 9.61 5.48092XHS42 4200 100 10 40.41 9.63 6.40092XHS48 4800 100 10 46.17 9.62 7.31092XHS60 6000 100 10 57.70 9.62 9.14092XHS72 7200 100 10 69.25 9.62 10.970
150XHS36 Stud 150mm Load Bearing 3600 100 10 70.06 19.47 7.430150XHS42 4200 100 10 81.72 19.46 8.670150XHS48 4800 100 10 93.41 19.47 9.910
WALL STUD 1.15 BMT
150XHS48 4800 100 10 93.41 19.47 9.910150XHS60 6000 100 10 116.74 19.46 12.380150XHS72 7200 100 10 140.07 19.46 14.860
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
64XHT30 Track 64mm x 32mm 3000 100 10 20.66 6.89 3.47076XHT30 Track 76mm x 32mm 3000 100 10 22.68 7.56 3.82092XHT30 Track 92mm x 32mm 3000 100 10 25.25 8.42 4.280150XHT30 Track 150mm x 32mm 3000 100 10 56.24 18.75 5.990
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
64XHDHT30 DHT 64mm x 50mm 3000 100 10 35.99 12.00 4.57076XHDHT30 DHT 76mm x 50mm 3000 100 10 38.53 12.85 4.98092XHDHT30 DHT 92mm x 50mm 3000 100 10 41.80 13.94 5.370150XHDHT30 DHT 150mm x 50mm 3000 100 10 58.90 19.64 6.990
TOP & BOTTOM TRACK 1.15 BMT
DEFLECTION HEAD TRACK 1.15 BMT
Wall Track Deflection Track Wall Stud
* Denotes lead times and minimum order quantity may apply PAGE 7
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part LENGTH STOCK SUB PRICE ApproxNo. (mm) PACK PACK EACH kg/piece
92XXHT30 * HEAVY DUTY TRACK 92mm x 1.50 BMT 3000 100 10 P.O.A 5.70092XXHS72 * HEAVY DUTY STUD 92mm x 1.50 BMT 7200 100 10 P.O.A 15.260
Part LENGTH STOCK SUB PRICE ApproxNo. (mm) PACK PACK EACH kg/piece
SWC64‐530 * 64mm CH STUD 0.55BMT x 3.0m 3000 50 50 P.O.A 2.758SWC64‐536 * 64mm CH STUD 0.55BMT x 3.6m 3600 50 50 P.O.A 3.310SWC64‐945 * 64mm CH STUD 0.90BMT x 4.5m 4500 50 50 P.O.A 6.629SWE64‐530 * 64mm E STUD 0.55BMT x 3.0m 3000 100 100 P.O.A 1.995SWE64‐536 * 64mm E STUD 0.55BMT x 3.6m 3600 100 100 P.O.A 2.394SWTJ64‐30 * 64mm J RUNNER TRACK 0.80BMT 57 x 25mm x 3.0m 3000 50 50 P.O.A 2.882SWTD64‐30 * 64mm DEFLECTION TRACK 0.80BMT 75 x 50mm x 3.0m 3000 50 50 P.O.A 3.692SWC102‐536 * 102mm CH STUD 0.55BMT x 3.6m 3600 50 50 P.O.A 3.961SWC102‐543 * 102mm CH STUD 0.55BMT x 4.3m 4300 50 50 P.O.A 4.731SWC102‐955 * 102mm CH STUD 0.90BMT x 5.5m 5500 50 50 P.O.A 9.641SWE102‐536 * 102mm E STUD 0.55BMT x 3.6m 3600 100 100 P.O.A 3.167
SHAFTWALL SYSTEM
STEEL STUD WALL SYSTEM 1.50 BMT
Wall Track Deflection Track Wall Stud
SWE102 536 102mm E STUD 0.55BMT x 3.6m 3600 100 100 P.O.A 3.167SWE102‐543 * 102mm E STUD 0.55BMT x 4.3m 4300 100 100 P.O.A 3.783SWTJ102‐30 * 102mm J RUNNER TRACK 0.80BMT 57 x 25mm x 3.0m 3000 50 50 P.O.A 3.632SWTD102‐30 * 102mm DEFLECTION TRACK 0.80BMT 75 x 50mm x 3.0m 3000 50 50 P.O.A 4.442
Part LENGTH STOCK SUB PRICE ApproxNo. (mm) PACK PACK EACH kg/piece
64HN45 Nogging 64mm @ 450 centres 450 10 10 4.63 0.35064HN60 Nogging 64mm @ 600 centres 600 10 10 5.04 0.47076HN45 Nogging 76mm @ 450 centres 450 10 10 4.21 0.39076HN60 Nogging 76mm @ 600 centres 600 10 10 5.35 0.51092HN45 Nogging 92mm @ 450 centres 450 10 10 4.64 0.43092HN60 Nogging 92mm @ 600 centres 600 10 10 6.48 0.570150HN45 Nogging 150mm @ 450 centres 450 10 10 9.99 0.600150HN60 Nogging 150mm @ 600 centres 600 10 10 10.76 0.800
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
64NT45 Nogging Track 64mm @ 450 centres x 3.6 3600 100 10 28.41 7.90 2.86064NT60 Nogging Track 64mm @ 600 centres x 3.6 3600 100 10 28.14 7.82 2.86076NT45 Nogging Track 76mm @ 450 centres x 3.6 3600 100 10 30.08 8.36 3.15076NT60 Nogging Track 76mm @ 600 centres x 3.6 3600 100 10 29.78 8.28 3.15092NT45 Nogging Track 92mm @ 450 centres x 3.6 3600 100 10 31.58 8.78 3.34092NT60 Nogging Track 92mm @ 600 centres x 3.6 3600 100 10 31.31 8.70 3.340150NT45 Nogging Track 150mm @ 450 centres x 3.6 3600 100 10 44.91 12.48 4.860150NT60 Nogging Track 150mm @ 600 centres x 3.6 3600 100 10 44.64 12.40 4.860
NOGGINGS 0.75 BMT
NOGGING TRACK 0.75 BMT
Wall Track Deflection Track Wall Stud
Nogging TrackNogging
* Denotes lead times and minimum order quantity may apply PAGE 8
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part LENGTH STOCK SUB PRICE ApproxNo. (mm) PACK PACK EACH kg/pieceM68 Nogging Bracket 36mm x 70mm long‐INTERMEDIATE 70 50 1 3.06 0.078M69 Nogging Bracket 36mm x 70mm long‐END 70 50 1 2.63 0.042M78 Nogging Bracket 18mm x 150mm long‐INTERMEDIATE 150 50 1 3.56 0.132M79 Nogging Bracket 18mm x150mm long‐END 150 50 1 2.80 0.070
NOGGING BRACKETS
M78
36mm18mm
M79 M68 M69
M78 & M79 nogging brackets are designed to suit 18mm plywood.
M68 & M69 nogging brackets are designed to suit standard 35mm timber stud noggings.
Studco Nogging Bracket System makes installing timber noggings ‐ of virtually any shape or size ‐ into a steel stud wall a breeze. The bracket system is supplied ready to install, with pre‐punched holes and cut to length, saving considerable time on site.
Part LENGTH SUB PRICE ApproxNo. (mm) PACK EACH kg/piece
CURVED TRACK‐0.55 BMTCT51S * 51mm x 32mm x 0.55BMT 3000 1 P.O.A 1.440CT64S * 64mm x 28mm x 0.55BMT 3000 1 P.O.A 1.590CT76S * 76mm x 28mm x 0.55BMT 3000 1 P.O.A 1.920CT92S * 92mm x 28mm x 0.55BMT 3000 1 P.O.A 2.150
Curved Track & Curved Deflection Head Track are available in all sizes and material gauges.
Part LENGTH STOCK SUB PRICE ApproxNo. (mm) PACK PACK EACH kg/piece
FLEXIBLE TRACK FOR CURVED WALLS & BULKHEADS (with side reinforcement)FL‐51‐24 51mm x 42 x 0.55 BMT Flexible Track 2400 50 1 P.O.A 1.640FL‐64‐24 64mm x 45 x 0.55 BMT Flexible Track 2400 50 1 P.O.A 1.656FL‐70‐24 * 70mm x 42 x 0.55 BMT Flexible Track 2400 50 1 P.O.A 1.664FL‐76‐24 76mm x 39 x 0.55 BMT Flexible Track 2400 50 1 P.O.A 1.664FL‐92‐24 92mm x 41 x 0.75 BMT Flexible Track 2400 50 1 P.O.A 1.696FL‐150‐24 * 150mm x 42 x 0.75 BMT Flexible Track 2400 30 1 P.O.A 2.536
CURVED TRACK
FLEXITRAXX
M78
Flexible TrackCurved Track
36mm18mm
M79 M68 M69
M78 & M79 nogging brackets are designed to suit 18mm plywood.
M68 & M69 nogging brackets are designed to suit standard 35mm timber stud noggings.
Studco Nogging Bracket System makes installing timber noggings ‐ of virtually any shape or size ‐ into a steel stud wall a breeze. The bracket system is supplied ready to install, with pre‐punched holes and cut to length, saving considerable time on site.
* Denotes lead times and minimum order quantity may apply PAGE 9
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/pieceM100 Framing L Bracket 100 x 45 x 40 wide (1.5mm BMT) 100 1 2.77 0.087M103 Framing Bracket Slotted Web Cleat 75 x 50 x 80 wide (3mm BMT) 100 1 10.63 0.190M545 Universal Framing Bracket 75 x 75 x 55 wide (1.5mm BMT) 100 1 3.17 0.090
BRFL50‐1 Framing L Bracket 50 x 50 x 70 wide (1.5mm BMT) 100 1 2.42 0.080SSH‐M10‐25 Set Screw (BOLT) M10 x 25mm ZP Hex Head ‐ for framing brackets Box 150 P.O.A 0.000
W1024 Washer 10 X 24 Zinc Plated ‐ for framing brackets Box 100 P.O.A 0.492N‐M10 Nut M10 Zinc Plated ‐ for framing brackets Box 100 P.O.A 0.930
STRAP25830 Tension Brace Strapping Coil Z275 24mm x 0.8 x 30m 30m ‐ 1 P.O.A 4.100STRAP25850 * Tension Brace Strapping Coil Z275 24mm x 0.8 x 50m 50m ‐ 1 P.O.A 7.100STRAPT100 Brace Strapping Tensioner Box of 100 ‐ 100 P.O.A 4.540STRAPT6 Brace Strapping Tensioner Pack of 6 ‐ 6 P.O.A 0.000RM126 Staggered stud clip 100 100 P.O.A 0.020RM127 Staggered stud clip ‐ Box type for 64mm stud in 92mm track 50 50 P.O.A 0.070
ACCESSORIES FOR STUD WALLS
M103 M100 BRFL50‐1 M545
SSH‐M10‐25
N‐M10
W1024M103
STRAP25830 RM126 RM127
M100 BRFL50‐1 M545
STRAPT
SSH‐M10‐25
N‐M10
W1024
Call Faststud today to arrange a copy of the STUDCO
"Wall & Ceiling Design & Installation Manual".
Full of handy tips and ideas to get the job done properly. From span tables to acoustic design guides.
We've got you covered.
* Denotes lead times and minimum order quantity may apply PAGE 10
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part SUB PRICE ApproxNo. PACK EACH kg/piece
PATLSCI Stud Crimper‐short handle 1 P.O.A 0.590PATLSP Stud Punch ‐ Punches a 34mm service hole in studs. 1 P.O.A 2.784
PATLSPG1 Stud Punch Insert‐ Easy Snap in Grommet‐Pack 100 100 P.O.A 0.816PATLTSG Aviation Tin Snips ‐ Right Cut ‐ GREEN 1 P.O.A 0.432PATLTSR Aviation Tin Snips ‐ Left Cut ‐ RED 1 P.O.A 0.432PATLTSY Aviation Tin Snips ‐ Straigh Cut ‐ YELLOW 1 P.O.A 0.432
Part Length STOCK SUB PRICE ApproxNo. mm PACK PACK EACH kg/pieceBACKING STRIPS
ACCESSORIES FOR STUD WALLS
PATLSCI PATLTSY PATLSPPATLSPG1
BSCB050‐30 Black Colorbond Backing Strip 50mm 3000 5 1 P.O.A 6.040BSCB100‐30 Black Colorbond Backing Strip 100mm 3000 5 1 P.O.A 12.080
Part SUB PRICE ApproxNo. PACK EACH kg/piece
GS1224‐055 * Galvabond Sheet 1220 x 2440 0.55 BMT 1 P.O.A 13.700GS1224‐080 * Galvabond Sheet 1220 x 2440 0.80 BMT 1 P.O.A 19.610GS1224‐110 * Galvabond Sheet 1220 x 2440 1.10 BMT 1 P.O.A 27.030
EM5020F * Expanded Mesh Flattened 1200 x 2400 x 2mm (opening size 87 x 43) 1 P.O.A 7.200
GAL & MESH SHEETS
PATLSCI PATLTSY PATLSPPATLSPG1
Galvabond Sheet
Gal Sheet & Expanded Mesh Sheets are ideal
for security wall applications
Expanded Mesh
* Denotes lead times and minimum order quantity may apply PAGE 11
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
M27‐36 Top Cross Rail 25mm x 0.75BMT 3600 200 10 13.95 3.88 1.900M27‐48 Top Cross Rail 25mm x 0.75BMT 4800 200 10 18.59 3.88 2.540M27‐60 Top Cross Rail 25mm x 0.75BMT 6000 200 10 23.26 3.88 2.540M27R‐36 * Top Cross Rail 25mm x 0.75BMT ‐ Curved to your specified radius 3600 1 1 45.77 12.72 1.900M27R‐48 * Top Cross Rail 25mm x 0.75BMT ‐ Curved to your specified radius 4800 1 1 61.04 12.72 2.540M28‐48 Top Cross Rail 38mm x 0.75BMT 4800 100 5 29.39 6.13 3.300
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
M308‐27 Furring Channel 16mm 2700 240 8 7.72 2.86 1.080M308‐30 Furring Channel 16mm 3000 240 8 8.58 2.86 1.190M308‐36 Furring Channel 16mm 3600 240 8 10.28 2.86 1.430M308‐48 Furring Channel 16mm 4800 240 8 13.70 2.86 1.910M308‐60 Furring Channel 16mm 6000 240 8 17.14 2.86 2.380
M29‐27 Furring Channel 28mm 2700 240 8 9.42 3.49 1.370M29‐30 Furring Channel 28mm 3000 240 8 10.42 3.48 1.530M29‐36 Furring Channel 28mm 3600 240 8 12.54 3.49 1.830M29‐48 Furring Channel 28mm 4800 240 8 16.68 3.48 2.440M29‐60 Furring Channel 28mm 6000 240 8 20.84 3.48 3.010
M333‐30 Recessed Furring Channel 13mm 3000 200 10 14.71 4.91 1.550
CONCEALED CEILING SYSTEMSPRIMARY CHANNELS
FURRING CHANNELS & BATTENS
M333 30 Recessed Furring Channel 13mm 3000 200 10 14.71 4.91 1.550M333‐60 Recessed Furring Channel 13mm 6000 200 10 29.39 4.90 3.110M301‐48 Nail Up Batten 17mm 4800 450 18 10.92 2.28 1.330
THB24‐042‐48 24mm Cyclonic Ceiling Batten 4800 200 10 13.26 2.77 1.800THB24‐042‐61 24mm Cyclonic Ceiling Batten 6100 200 10 16.82 2.76 2.290THB40‐048‐75 40mm Ceiling Batten 7500 150 1 37.11 4.95 4.560
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
M40‐30 M29 Furring Channel Wall Track 3000 500 20 9.96 3.32 0.980M42‐30 M308 Furring Channel Wall Track 3000 500 20 9.64 3.22 0.880
WALL TRACK
M27 M29
M28 M308 M42
M40
THB24
M333
M301
* Denotes lead times and minimum order quantity may apply PAGE 12
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/pieceM39 Locking Key 400 200 0.58 0.018M534 Cross Rail Spring Hanger 250 250 1.74 0.020M520 Sidemount Spring Hanger 200 200 1.74 0.020M74 SR5 to timber joist 1000 100 0.56 0.018M47 SR5 to concrete 1000 100 0.56 0.018MBW Bondek® Suspension Wedge 50 50 P.O.A 0.030MVF Purlin Clip in 100 Box 100 100 23.44 0.860
CSA6‐60 Ceiling Suspension Wedge Anchor 6mm x 60mm in 100 Box 100 100 14.16 1.140CSA6‐120 Ceiling Suspension Wedge Anchor 6mm x 120mm in 100 Box 100 100 36.35 2.530BRDP Drive Pin Suspension Angle Bracket 25mm x 30mm in 100 Box 100 100 25.22 1.402
Part LENGTH STOCK SUB PRICE ApproxNo. (mm) PACK PACK EACH kg/pieceM13 M301 Batten to timber/steel (short) 400 100 0.61 0.021M16 M301 Batten to timber/steel (long) 400 100 0.73 0.041M80 M301 Batten to conrete 100 100 1.52 0.019M26 M308‐M29 Furring Channel to timber/steel (short) 400 100 0.66 0.040M94 M308‐M29 Furring Channel to timber/steel (long) 200 50 1.57 0.074M96 M308‐M29 Furring Channel to timber/steel multidirectional 100 100 3.68 1.210
DIRECT FIX CLIPS
SUSPENSION CLIPS
M39 M534 M520 M47 M74 MVF CSA6BRDP MBW
M96 M308 M29 Furring Channel to timber/steel multidirectional 100 100 3.68 1.210M81 L Bracket for M17‐M29 100 100 0.81 0.026M237 M308‐M29 Furring Channel to concrete 400 200 0.95 0.028M239 M308‐M29 Furring Channel to concrete‐threaded 400 200 1.40 0.029
M239BA65 M308‐M29 Anchor Clip with 65mm Bolt 65 100 50 3.31 0.050M239BA85 M308‐M29 Anchor Clip with 85mm Bolt 85 100 50 3.31 0.060M239BA120 M308‐M29 Anchor Clip with 120mm Bolt 120 100 50 3.55 0.060M239BA150 M308‐M29 Anchor Clip with 150mm Bolt 150 100 50 3.66 0.070M239BA180 M308‐M29 Anchor Clip with 180mm Bolt 180 100 50 3.70 0.070
MBF Betafix Clip 200 50 2.13 0.038MBFS Bettafix Clip with Longneck for use with Aircell Insulation 200 50 2.45 0.038M66 M25‐M27‐M28 Top Cross Rail to timber / steel 250 100 1.53 0.030M24 M27 ‐ M28 Top Cross Rail to concrete 250 100 1.79 0.030M24N M27‐M28 Top Cross Rail to Concrete Thread Adjustable 250 100 2.50 0.030
M24NB65 * M27‐M28 Thread Adj. With 65mm Bolt 65 100 50 3.35 0.040M24NB85 * M27‐M28 Thread Adj. With 85mm Bolt 85 100 50 3.35 0.040M24NB120 * M27‐M28 Thread Adj. With 120mm Bolt 120 100 50 3.67 0.050M24NB150 * M27‐M28 Thread Adj. With 150mm Bolt 150 100 50 4.03 0.050M24NB180 * M27‐M28 Thread Adj. With 180mm Bolt 180 100 50 4.22 0.060
M39 M534 M520 M47 M74 MVF CSA6BRDP
M16
M81
M24NB
M66
M24NM24
MBF MBFS for use with Aircell Insulation
M239BAM239M237M80
M13
M94
M26
MBW
Drill size required 6mm
Drill size required 6mm
M96
* Denotes lead times and minimum order quantity may apply PAGE 13
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/pieceM38 M29 Furring Channel Joiner 400 100 0.75 0.049M272 M27 Top Cross Rail Joiner 100 10 1.53 0.144M254 SR5 Joiner 1000 100 0.92 0.010M140 M301 Nail up batten Joiner 400 100 0.81 0.032
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
SOFT GALVANISED ROD FOR SUSPENDED CEILING SYSTEMSSR5 5mm Galvanised Rod 3600 500 25 4.03 1.12 0.560
SR1T * 5mm Galvanised Rod with M6 Thread one end n/a 500 50 P.O.A ‐ ‐
SR2T * 5mm Galvanised Rod with M6 Thread both ends n/a 500 50 P.O.A ‐ ‐
SRH * 5mm Galvanised Rod Cut to Length and Hooked at one end n/a 500 50 P.O.A ‐ ‐Hooked and Threaded rod made to order at required length. Minimum order quantities apply.
JOINERS
SUSPENSION ROD
M272 M38 M140 M254
q g q pp yFULLY THREADED (BOOKER) ROD
SRB06Z1 * M6 Booker Rod ‐ Fully Threaded Zinc Plated x 1.0m 1000 ‐ 10 P.O.A ‐ 1.800SRB06Z3 * M6 Booker Rod ‐ Fully Threaded Zinc Plated x 3.0m 3000 ‐ 10 P.O.A ‐ 5.000SRB08Z1 * M8 Booker Rod ‐ Fully Threaded Zinc Plated x 1.0m 1000 ‐ 10 P.O.A ‐ 3.000SRB08Z3 * M8 Booker Rod ‐ Fully Threaded Zinc Plated x 3.0m 3000 ‐ 10 P.O.A ‐ 9.000SRB10Z1 * M10 Booker Rod ‐ Fully Threaded Zinc Plated x 1.0m 1000 ‐ 10 P.O.A ‐ 5.000SRB10Z3 * M10 Booker Rod ‐ Fully Threaded Zinc Plated x 3.0m 3000 ‐ 10 P.O.A ‐ 14.500SRB12Z1 * M12 Booker Rod ‐ Fully Threaded Zinc Plated x 1.0m 1000 ‐ 5 P.O.A ‐ 3.500SRB12Z3 * M12 Booker Rod ‐ Fully Threaded Zinc Plated x 3.0m 3000 ‐ 5 P.O.A ‐ 10.500SRB16Z1 * M16 Booker Rod ‐ Fully Threaded Zinc Plated x 1.0m 1000 ‐ 5 P.O.A ‐ 6.300SRB16Z3 * M16 Booker Rod ‐ Fully Threaded Zinc Plated x 3.0m 3000 ‐ 5 P.O.A ‐ 19.000SRB20Z1 * M20 Booker Rod ‐ Fully Threaded Zinc Plated x 1.0m 1000 ‐ 5 P.O.A ‐ 10.000SRB20Z3 * M20 Booker Rod ‐ Fully Threaded Zinc Plated x 3.0m 3000 ‐ 5 P.O.A ‐ 30.000
Lead time and Minimum order quantities apply.NUTS FOR THREADED ROD
N‐M06 M6 Zinc Plated Nuts Box 100 P.O.A ‐ 0.230N‐M08 * M8 Zinc Plated Nuts Box 100 P.O.A ‐ 0.580N‐M10 * M10 Zinc Plated Nuts Box 100 P.O.A ‐ 0.930N‐M12 * M12 Zinc Plated Nuts Box 100 P.O.A ‐ 1.190
M272 M38 M140 M254
SR5 SRH SRT
SRB ‐ Booker Rod
N‐M06 ‐ 12
* Denotes lead times and minimum order quantity may apply PAGE 14
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
M355‐30 35mm Ceiling Channel 0.5 BMT 3000 100 10 12.50 4.17 1.630M355‐36 35mm Ceiling Channel 0.5 BMT 3600 100 10 15.00 4.17 1.960
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
M324‐2 Ceiling Bracket for cavity distance of 37 ‐ 60 mm 200 100 5.40 0.030M324‐4 Ceiling Bracket for cavity distance of 53 ‐ 76 mm 200 100 5.49 0.040M324‐6 Ceiling Bracket for cavity distance of 69 ‐ 92 mm 200 100 5.60 0.050M324‐8 Ceiling Bracket for cavity distance of 85 ‐108 mm 200 100 5.71 0.060
*Cavity distance is the distance between the concrete substrate and the back face of the plasterboard lining.
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
SLIMCEIL CHANNEL
SLIMCEIL BRACKETS
PERIMETER ANGLENo. (mm) PACK PACK EACH $ l/m kg/pieceBA3030‐055‐30 Perimeter Angle 30 x30 x 0.55 BMT 3000 500 1 8.47 2.83 0.960
M234 M355 BA3030
HOW IT WORKS:1. Fix the bracket to the substrate2. Insert channel into bracket3. Use one slot per side to fix channel to bracket4. Adjust channel to level5. Lock in with 2 more screws
*Slimceil channel can be joined by boxing a 300mm piece of the channel at the join and screwing off on both sides at each end.
Acoustic SLIMCEIL brackets also available. See Page 18
* Denotes lead times and minimum order quantity may apply PAGE 15
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part LENGTH STOCK SUB PRICE ApproxNo. (mm) PACK PACK EACH kg/piece
GRCMR36 Main Runner Standard ‐ 3600 3600 1000 20 P.O.A 1.200GRCCR12 Cross Tee Standard ‐ 1200 1200 3000 60 P.O.A 0.370GRCCR06 Cross Tee Light ‐ 600 600 6000 60 P.O.A 0.150
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
GRCCL1 Suspension clip ‐ Banana clip with hook 500 50 P.O.A 0.018GRCCL2 Suspension clip ‐ SR5 to Main Runner 500 50 P.O.A 0.030
M88 Wall Angle to Main Runner or Cross Runner 1000 100 P.O.A 0.020
GRID
SUSPENSION CLIPS & BRACKETS
EXPOSED GRID CEILING SYSTEM
GRCMR36 GRCCR12 GRCCR06
GRCCL1 GRCCL2 M88
Part LENGTH SUB PRICE ApproxNo. (mm) PACK EACH kg/piece
GRCWA1 Standard Wall Angle 3600mm 3600 40 P.O.A 0.550GRCWA2 Long Leg Wall Angle 3600mm 3600 32 P.O.A 1.000GRCWA3 Standard Shadowline Wall Angle 3000mm 3000 40 P.O.A 0.530GRCWA4 Long Leg Shadowline Wall Angle 3600mm 3600 24 P.O.A 1.130
Part LENGTH STOCK SUB PRICE ApproxNo. (mm) PACK PACK EACH kg/pieceGRA1 Aluminium Shadowline Wall Angle x 3.6m 3600 10 1 P.O.A 1.100GRA2 Aluminium Wall Angle 22 x 19 x 3.6m 3600 10 1 P.O.A 1.100GRABH Aluminium Bulkhead Trim Direct Fix x 3.6m 3600 10 1 P.O.A 1.150
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/pieceSR5 5mm Galvanised Soft Rod 3600 500 25 4.03 1.12 0.560SR25 * 2.5mm Galvanised Soft Wire 3600 ‐ 50 P.O.A ‐ 0.220
WALL ANGLE ‐ METAL
WALL ANGLE ‐ ALUMINIUM
SUSPENSION ROD
GRCMR36 GRCCR12 GRCCR06
GRCCL1 GRCCL2 M88
GRCWA1 GRCWA2 GRCWA3
GRA1 GRABH
* Denotes lead times and minimum order quantity may apply PAGE 16
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part SUB PRICE Approx ApproxNo. PACK EACH $ m2 kg/piece
PLASTERBOARDGRT01 Plaster Tile with white textured vinyl face 1200 x 600 x 9.5mm 6 P.O.A 5.200
ACOUSTICGRT03 BM200 RH99 Fissured Tile 1200 x 600 x 15mm sq edge 6 P.O.A 4.200GRT05 * FT800 RH99 High NRC 0.90 1200 x 600 x 20mm sq edge 15 P.O.A 1.680
ARMSTRONGGRT12 * Armstrong RH95 Eris Fissured 1200 x 600 x 9mm sq edge 12 P.O.A 1.830GRT13 * Armstrong RH99 Fine Fissured 1200 x 600 x 16mm sq edge 10 P.O.A 2.300GRT14 * Armstrong RH99 DUNE Fine text. 1200 x 600 x 15mm sq edge 10 P.O.A 2.600GRT15 * Armstrong RH99 OPTIMA 0.90NRC 1200 x 600 x 15 sq edge 20 P.O.A 1.100
USG GRT20 * USG RH95 Radar Fine Fissured 1200 x 600 x 15 sq edge 8 P.O.A 2.600GRT21 * USG RH95 Impressions Micro Fissure 1200 x 600 x 15 sq edge 8 P.O.A 2.600GRT22 * USG RH95 Mars 0.70NRC Smooth 1200 x 600 x 19 sq edge 6 P.O.A 3.400
CEILING TILES
Faststud can supply ceiling tiles to suit any application. Call us today for project pricing.
GRT01
Square edge / Lay in
Tegular edge
GRT03 GRT05
Faststud can supply ceiling tiles to suit any application. Call us today for project pricing.
* Denotes lead times and minimum order quantity may apply PAGE 17
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
RM237R Direct Fix Furring Channel Resilient Mount 100 100 5.86 0.030RM24R Resilient Joiner Bracket 100 100 9.19 0.140RM48R Resilient Mount Right Angle Bracket 100 100 8.17 0.067RM96R Furring Channel to Purlin/Joist Resilient Mount 100 100 9.92 0.086RM239R Resilient Anchor Clip with Thread for M29 100 100 8.21 0.740RMBFR Adjustable Direct Fix Furring Channel Resilient Mount 100 100 7.62 0.047RMBFR6 Betafix Resiliant with 6.5 x 50 ZP Masonry Anchor 100 100 8.88 0.062RM237TR Furring Channel to Top Cross Rail Resilmount 250 250 8.38 0.075RM324R‐2 SLIMCEIL Resilient Mounted Ceiling Bracket, suits 37‐ 60mm cavity 200 100 P.O.A 0.040RM324R‐4 SLIMCEIL Resilient Mounted Ceiling Bracket, suits 53 ‐ 76mm cavity 200 100 P.O.A 0.050RM324R‐6 SLIMCEIL Resilient Mounted Ceiling Bracket, suits 69 ‐ 92mm cavity 200 100 P.O.A 0.060RM324R‐8 SLIMCEIL Resilient Mounted Ceiling Bracket, suits 85 ‐ 108mm cavity 200 100 P.O.A 0.070
Resilmounts
SOUND ISOLATION SYSTEMS
RM48R
RM324RRM237TR
Part LENGTH STOCK SUB PRICE ApproxNo. (mm) PACK PACK EACH kg/piece
RM239BA65 * Resilient Anchor M17‐M29 Clip with 65mm Bolt 100 100 8.52 0.100RM239BA85 * Resilient Anchor M17‐M29 Clip with 85mm Bolt 100 100 8.63 0.100RM239BA120 * Resilient Anchor M17‐M29 Clip with 120mm Bolt 100 100 8.81 0.100RM239BA150 * Resilient Anchor M17‐M29 Clip with 150mm Bolt 100 100 9.06 0.110RM239BA180 * Resilient Anchor M17‐M29 Clip with 180mm Bolt 100 100 9.23 0.110
RM581 * Resilient Furring Channel 3658 200 40 23.86 0.982RM126 Staggered Stud Clip (Acoustic) 500 100 1.14 0.020RM127 Staggered Stud Clip ‐ Box type (64mm Stud to 92mm Track) 500 100 2.84 0.070RM50R * Resilient Isolation Hanger 100 100 10.74 0.070RN5‐38 Rubber Nut for Fixing Rubber Impact Mats 5mm x 38mm 100 100 73.41 0.010RM07 * Rubber Impact Mats 40 x 40 x 8 100 100 66.00 0.011
Part Width Length SUB PRICE ApproxNo. (mm) m PACK EACH kg/roll
WAVEBAR Flexible Noise BarrierINWB4‐05 * WaveBar 4kg ‐ 1350mm x 5.0m Roll 1350 5 1 P.O.A 27.00INWB6‐05 * WaveBar 6kg ‐ 1350mm x 5.0m Roll 1350 5 1 P.O.A 40.50INWB8‐05 * WaveBar 8kg ‐ 1350mm x 5.0m Roll 1350 5 1 P.O.A 54.00
WaveBar
Acoustic Brackets
RMBFRRM237R
RM48R
RM24R RM96R
RM324RRM237TR
RM239BA
RM50R RN5‐38 RM07 RM581 RM126 RM127
RMBFR6
* Denotes lead times and minimum order quantity may apply PAGE 18
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
THB24‐042‐48 24mm x 0.42 BMT (cyclonic) 4800 200 1 13.26 2.77 1.800THB24‐042‐61 24mm x 0.42 BMT (cyclonic) 6100 200 1 16.82 2.76 2.290THB35‐055‐48 * 35mm x 0.55 BMT 4800 100 5 P.O.A ‐ 2.892THB35‐055‐60 * 35mm x 0.55 BMT 6000 100 5 P.O.A ‐ 3.616THB40‐048‐75 * 40mm x 0.48 BMT 7500 150 1 37.11 4.95 4.560THB40‐055‐75 40mm x 0.55 BMT 7500 150 1 40.29 5.38 5.230THB40‐075‐75 * 40mm x 0.75 BMT 7500 150 1 54.50 7.27 7.720
TOP HAT CEILING / ROOF BATTENS
TOP HATS
THB24 THB35
40mm38mm
24mm
35mm
43mm
0mm
THB24 THB35
40mm38mm
24mm
35mm
FastStud keeps a large range of Tophat Battens, Purlins, & Tophat Junction Studs in
stock.
Span Tables available upon
request
THB40
43mm
40mm
* Denotes lead times and minimum order quantity may apply PAGE 19
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
THB50‐075‐75 * 50mm x 0.75 BMT 7500 100 1 61.15 8.16 7.800THB50‐095‐75 50mm x 0.95 BMT 7500 100 1 76.23 10.17 10.350
THB64‐075‐75 * 64mm x 0.75 BMT 7500 100 1 70.84 9.45 9.150THB64‐095‐75 64mm x 0.95 BMT 7500 100 1 88.11 11.75 11.700THB64‐115‐75 * 64mm x 1.15 BMT 7500 100 1 105.93 14.13 14.940
THB75‐075‐75 75mm x 0.75 BMT 7500 100 1 83.50 11.14 9.240THB75‐095‐75 75mm x 0.95 BMT 7500 100 1 98.51 13.14 12.750THB75‐115‐75 * 75mm x 1.15 BMT 7500 100 1 118.54 15.81 16.190
THB96‐075‐75 96mm x 0.75 BMT 7500 100 1 96.53 12.88 12.080THB96‐095‐75 96mm x 0.95 BMT 7500 100 1 121.01 16.14 15.530THB96‐115‐75 * 96mm x 1.15 BMT 7500 100 1 145.53 19.41 19.870
THB120‐075‐75 120mm x 0.75 BMT 7500 100 1 121.01 16.14 15.150THB120‐095‐75 120mm x 0.95 BMT 7500 100 1 151.97 20.27 19.500THB120‐115‐75 * 120mm x 1.15 BMT 7500 100 1 182.89 24.39 25.700
TOP HAT PURLINS
Material: G550 Z275Material: G550 Z275
Non standard lengths available upon request. Lead time and minimum order quantities apply.
THB50
THB64
THB75
THB96
THB120
* Denotes lead times and minimum order quantity may apply PAGE 20
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
THJ5015‐36 50mm x 15mm x 1.15 3600 200 1 23.86 6.63 3.260THJ5015‐60 50mm x 15mm x 1.15 6000 200 1 39.75 6.63 5.430
THJ5024‐36 50mm x 24mm x 1.15 3600 100 1 28.00 7.78 4.220THJ5024‐60 50mm x 24mm x 1.15 6000 200 1 46.67 7.78 7.030
THJ5035‐36 50mm x 35mm x 1.15 3600 50 1 35.70 9.92 5.020THJ5035‐60 50mm x 35mm x 1.15 6000 50 1 59.50 9.92 8.360THJ5035‐72 50mm x 35mm x 1.15 7200 50 1 71.40 9.92 10.030
THJ5050‐36 * 50mm x 50mm x 1.15 3600 50 1 P.O.A P.O.A 5.977THJ5050‐72 * 50mm x 50mm x 1.15 7200 50 1 P.O.A P.O.A 11.594
TOP HAT JUNCTION STUD 50mm
THJ5015 THJ5024 THJ5035 THJ5050
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
THJ7515‐60 75mm x 15mm x 1.15 6000 200 1 45.90 7.65 6.750
THJ7524‐60 75mm x 24mm x 1.15 6000 200 1 53.95 9.00 8.460
THJ7535‐60 75mm x 35mm x 1.15 6000 50 1 71.70 11.95 9.740THJ7535‐72 75mm x 35mm x 1.15 7200 50 1 86.05 11.96 11.690
THJ7550‐36 * 75mm x 50mm x 1.15 3600 50 1 P.O.A P.O.A 6.816THJ7550‐72 * 75mm x 50mm x 1.15 7200 50 1 P.O.A P.O.A 13.632
TOP HAT JUNCTION STUD 75mm
THJ5015 THJ5024 THJ5035 THJ5050
THJ7515 THJ7524 THJ7535 THJ7550
Non standard lengths available upon request. Lead time and minimum order quantities apply.
* Denotes lead times and minimum order quantity may apply PAGE 21
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part LENGTH SUB PRICE ApproxNo. (mm) PACK EACH kg/piece
90mm LONG IN BOXES OF 100PN9001 Nylon Packers 1.5mm x 90mm 90 100 P.O.A 0.560PN9003 Nylon Packers 3.2mm x 90mm 90 100 P.O.A 1.040PN9005 Nylon Packers 5mm x 90mm 90 100 P.O.A 1.520PN9006 Nylon Packers 6.4mm x 90mm 90 100 P.O.A 1.900PN9010 Nylon Packers 10mm x 90mm 90 100 P.O.A 3.000
75mm LONG IN BOXES OF 200 PN7501 Nylon Packers 1.5mm x 75mm 75 200 P.O.A 0.600PN7503 Nylon Packers 3.2mm x 75mm 75 200 P.O.A 1.370PN7505 Nylon Packers 5mm x 75mm 75 200 P.O.A 2.280PN7506 Nylon Packers 6.4mm x 75mm 75 200 P.O.A 2.910
75mm LONG IN BOXES OF 100PN7510 Nylon Packers 10mm x 75mm 75 100 P.O.A 2.990
Part SUB PRICE ApproxNo. Min Max PACK EACH kg/pieceTOP HAT BRACKETS
TOP HAT PACKERS
Range (mm)No. Min Max PACK EACH kg/piece
BRTH1 Tophat Bracket Gal 35 x 45 x 35 x 1.9mm ‐ Type 1 for THJ5035 35 50 1 P.O.A 0.160BRTH2 Tophat Bracket Gal 55 x 45 x 55 x 1.9mm ‐ Type 2 for THJ5035 55 70 1 P.O.A 0.220BRTH3 * Tophat Bracket Gal 50 x 45 x 50 x 1.9mm ‐ Type 3 for JH Exotec 55 70 1 P.O.A 0.212BRTH4 * Tophat Bracket Gal 30 x 45 x 30 x 1.9mm ‐ Type 4 for JH Exotec 38 50 1 P.O.A 0.158
BRTH1 BRTH2 BRTH3 BRTH4
12mmMin 12mmMin
Tophat brackets give the flexibility of adjustment between 35mm and 70mm from the substrate.
Contact Faststud for complete fixing details.
* Denotes lead times and minimum order quantity may apply PAGE 22
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part LENGTH STOCK SUB PRICE ApproxNo. (mm) PACK PACK EACH kg/piece
PUC10015‐61 C Purlin 100mm x 1.5BMT x 6.1m 6100 50 1 P.O.A 15.920PUC15015‐61 C Purlin 150mm x 1.5BMT x 6.1m 6100 50 1 P.O.A 21.900PUC20015‐61 C Purlin 200mm x 1.5BMT x 6.1m 6100 50 1 P.O.A 27.450
Part Approx ApproxNo. $ l/m kg/metre
C/Z10012 * C or Z Purlin 100mm x 1.2 BMT P.O.A 2.070C/Z10015 * C or Z Purlin 100mm x 1.5 BMT P.O.A 2.560C/Z10019 * C or Z Purlin 100mm x 1.9 BMT P.O.A 3.230C/Z15012 * C or Z Purlin 150mm x 1.2 BMT P.O.A 2.480C/Z15015 * C or Z Purlin 150mm x 1.5 BMT P.O.A 3.510C/Z15019 * C or Z Purlin 150mm x 1.9 BMT P.O.A 4.440C/Z15024 * C or Z Purlin 150mm x 2.4 BMT P.O.A 5.600C/Z20012 * C or Z Purlin 200mm x 1.2 BMT P.O.A 3.430C/Z20015 * C or Z Purlin 200mm x 1.5 BMT P.O.A 4.400C/Z20019 * C or Z Purlin 200mm x 1.9 BMT P.O.A 5.570C/Z20024 * C or Z Purlin 200mm x 2.4 BMT P.O.A 7.020C/Z25019 * C or Z Purlin 250mm x 1.9 BMT P.O.A 6.810C/Z25024 * C or Z Purlin 250mm x 2.4 BMT P.O.A 8.480
Part Approx ApproxNo. $ l/m kg/metre
C PURLINS (stocked lengths)
C & Z PURLINS (made to order)
TRACK FOR C PURLINS (made to order)
C & Z PURLINS
No. $ l/m kg/metrePUCT100 * Track for C100 Purlin ‐ 1.2BMT ‐ 101mm I.D. P.O.A 2.070PUCT150 * Track for C150 Purlin ‐ 1.2BMT ‐ 151mm I.D. P.O.A 2.480PUCT200 * Track for C200 Purlin ‐ 1.2BMT ‐ 201mm I.D. P.O.A 3.430
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
BRGP100 General Purpose Bracket to suit 100mm Purlin 1 P.O.A 0.200BRGP150 General Purpose Bracket to suit 150mm Purlin 1 P.O.A 0.360BRGP200 General Purpose Bracket to suit 200mm Purlin 1 P.O.A 0.540PUB12030F Purlin Bolt & Nut ‐ Flanged M12 x 30mm Zinc Box 100 P.O.A 7.000
( )
PURLIN ACCESSORIES
C Purlin Z Purlin
Purlin Bolt & Nut General Purpose
Brackets
Purlin & Track Wall System
* Denotes lead times and minimum order quantity may apply PAGE 23
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
CEX90‐24 External Angle ‐ 90° 2400 3300 50 2.96 1.24 0.370CEX90‐27 External Angle ‐ 90° 2700 3300 50 3.34 1.24 0.420CEX90‐30 External Angle ‐ 90° 3000 3300 50 3.70 1.24 0.470CEX90‐36 External Angle ‐ 90° 3600 3300 50 4.46 1.24 0.560CEX90D‐30 Plasterlock External Angle ‐ 90° 3000 480 20 5.20 1.74 0.470CEX135‐24 * Splayed External Angle ‐ 135° 2400 3300 50 4.49 1.88 0.370CEX135‐27 * Splayed External Angle ‐ 135° 2700 3300 50 5.06 1.88 0.420CEX135‐30 Splayed External Angle ‐ 135° 3000 3300 50 5.60 1.87 0.470CEX135‐36 * Splayed External Angle ‐ 135° 3600 3300 50 6.72 1.87 0.560
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
CIN90‐24 Internal Angle ‐ 90° 2400 3300 50 4.80 2.00 0.380
EXTERNAL CORNERS
INTERNAL CORNERS
PLASTERBOARD FINISHING SECTIONS
CEX90 CEX90D CEX135
CIN90 24 Internal Angle 90 2400 3300 50 4.80 2.00 0.380CIN90‐27 Internal Angle ‐ 90° 2700 3300 50 5.43 2.02 0.430CIN90‐30 Internal Angle ‐ 90° 3000 3300 50 6.00 2.00 0.480CIN90‐36 Internal Angle ‐ 90° 3600 3300 50 7.18 2.00 0.570CIN135‐30 Splayed Internal Angle ‐ 135° 3000 3300 50 7.76 2.59 0.480
Other lengths upon request.
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/pieceSL6 Shadowline 6mm 3000 500 20 6.88 2.30 0.470SL10 Shadowline 10mm 3000 500 20 6.16 2.06 0.490
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/pieceLSA6 Long Leg Stopping Angle 6mm 3000 500 20 6.93 2.31 0.430LSA10 Long Leg Stopping Angle 10mm 3000 500 20 6.57 2.19 0.430LSA13 Long Leg Stopping Angle 13mm 3000 500 20 6.75 2.25 0.470LSA16 Long Leg Stopping Angle 16mm 3000 500 20 7.12 2.38 0.520
STOPPING ANGLE
SHADOWLINE STOPPING ANGLE
CEX90 CEX90D CEX135
CIN90 CIN135
LSA
SL
* Denotes lead times and minimum order quantity may apply PAGE 24
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
PAB180‐30 Perforated Arch Bead ‐ Round holes 3000 500 50 5.04 1.68 0.320PAB180D‐30 Expanded Mesh Arch Bead ‐ Diamond holes 3000 500 10 5.45 1.82 0.440
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
SB6‐30 Metal Stopping Bead 6mm 3000 200 20 6.88 2.30 0.500SB10‐30 Metal Stopping Bead 10mm 3000 200 20 6.88 2.30 0.640SB13‐30 Metal Stopping Bead 13mm 3000 200 20 6.88 2.30 0.610SB16‐30 Metal Stopping Bead 16mm 3000 200 20 7.82 2.61 0.810
Other lengths upon request.
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
MCB6‐30 Metal Casing Bead 6mm 3000 200 20 5.94 1.98 0.630MCB10‐30 Metal Casing Bead 10mm 3000 200 20 6.00 2.00 0.580MCB13‐30 Metal Casing Bead 13mm 3000 200 20 6.00 2.00 0.580
CASING BEADS
ARCH BEAD
STOPPING BEADS
PAB180D PAB180
SB
MCBMCB13 30 Metal Casing Bead 13mm 3000 200 20 6.00 2.00 0.580MCB16‐30 Metal Casing Bead 16mm 3000 200 20 7.60 2.54 0.810
Other lengths upon request.
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/pieceEXJ6 Expansion Joint 6mm ‐ Black rubber 3000 15 15 34.85 11.62 0.580EXJ10 Expansion Joint 10mm ‐ Black rubber 3000 15 15 34.85 11.62 1.180EXJ10R Expansion Joint ‐ White rubber ‐ Suits all board thicknesses. 3000 100 10 42.30 14.10 1.240
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
BA3030‐004‐30 30 x 30 x 0.4mm BMT 3000 500 1 4.16 1.39 0.572BA3030‐055‐30 30 x 30 x 0.55mm BMT 3000 500 1 8.47 2.83 0.960BA3535‐075‐36 35 x 35 x 0.75mm BMT 3600 500 1 17.18 4.78 1.580BA5050‐075‐36 50 x 50 x 0.75mm BMT 3600 500 1 17.64 4.90 2.230BA5050‐115‐36 50 x 50 x 1.15mm BMT 3600 500 1 27.09 7.53 3.360BA7575‐075‐30 75 x 75 x 0.75mm BMT 3000 500 1 31.81 10.61 2.830BA7575‐115‐30 75 x 75 x 1.15mm BMT 3000 500 1 44.76 14.92 4.240
BA100100‐075‐30 100 x 100 x 0.75mm BMT 3000 500 1 40.74 13.58 3.770BA100100‐115‐30 100 x 100 x 1.15mm BMT 3000 500 1 58.14 19.38 5.650
EXPANSION JOINTS
BACKING ANGLES
Custom size backing angles can be made to order
PAB180D PAB180
SB
MCB
EXJ10 EXJ10R
BA
* Denotes lead times and minimum order quantity may apply PAGE 25
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part LENGTH STOCK SUB PRICE ApproxNo. (mm) PACK PACK EACH kg/piece
PVCCB10 PVC Casing Bead 10mm 3000 50 50 P.O.A 0.240PVCCB13 PVC Casing Bead 13mm 3000 50 50 P.O.A 0.320PVCSB13 PVC Set Casing Stopping Bead 13mm x 3.0m 3000 50 50 P.O.A 0.280
PVCCEX135 PVC External Corner Angle 135° (Adjustable from 120° TO 140°) 3000 50 50 P.O.A 0.220PVCCEX90 PVC External Corner Angle 90° 3000 50 50 P.O.A 0.300PVCCIN90 PVC Internal Corner Angle 90° 3000 40 40 P.O.A 0.260PVCCIN135 PVC Internal Corner Angle 135° (Adjustable from 70° to 150°) 3000 70 70 P.O.A 0.260PVCMAG76 * PVC Magic Corner Bead & Expansion Joint ‐ Flexible 76m Roll 76m 1 1 P.O.A 5.800PVCMAG35 * PVC Magic Corner Kit ‐ Includes 35m roll plus installation tool and adhesive 35m 1 1 P.O.A 9.000PVCEXJ10 PVC Deep V Expansion Joint with Tearaway Strips 3000 20 20 P.O.A 0.500PVCEXJH PVC Hideaway Expansion Joint with Tearaway Strips 3000 25 25 P.O.A 0.510PVCL06T PVC Tearaway L Bead 6mm 3000 50 50 P.O.A 0.230PVCL10T PVC Tearaway L Bead 10mm 3000 50 50 P.O.A 0.260PVCL13T PVC Tearaway L Bead 13mm 3000 50 50 P.O.A 0.280PVCL25 * PVC Oversized L Bead 25mm 3000 50 50 P.O.A 0.430PVCL32 * PVC Oversized L Bead 32mm 3000 50 50 P.O.A 0.510PVCL68 * PVC Oversized L Bead 68mm (Also pre scored at 53mm) 3000 30 30 P.O.A 0.860PVCL80 * PVC Super L Bead 80mm (Also pre scored at 40mm, 53mm & 65mm) 3000 30 30 P.O.A 0.980PVCL145 * PVC Giant L Bead 145mm (Also pre scored at 95mm, 108mm & 120mm) 3000 20 20 P.O.A 1.630PVCABL16 * PVC Archway L Bead 13mm & 16mm 3000 50 50 P.O.A 0.280PVCABL80 * PVC Archway Super L Bead 80mm (Pre scored at 40mm, 53mm & 65mm) 3000 30 30 P.O.A 0.980PVCABL145 * PVC Archway Giant L Bead 145mm (Pre scored at 95mm, 108mm & 120mm) 3000 20 20 P.O.A 1.630PVCABEX * PVC Archway Corner Bead 90° 3000 50 50 P.O.A 0.300PVCSL06T PVC Tearaway Shadowline 6mm 3000 25 25 P.O.A 0.220PVCSL10T PVC Tearaway Shadowline 10mm 3000 25 25 P.O.A 0.240PVCSL10TF * PVC Flexible Shadowline 10mm with Tearaway Strip 3000 25 25 P.O.A 0.250
PVC FINISHING SECTIONS
PVCSL10TF PVC Flexible Shadowline 10mm with Tearaway Strip 3000 25 25 P.O.A 0.250PVCTRIM PVC Finish Trim for L Beads and Window Reveals 3000 30 30 P.O.A 0.110PVCGA * PVC Flexible Wall Angle for ceiling grid 28mm x 22mm 2400 63 63 P.O.A 0.420PVCFC89 * PVC 89mm Wall Fast Cap for 64mm stud with 13mm plasterboard 3000 10 10 P.O.A 1.250PVCSPAD PVC Spray Adhesive 467 g ‐ 12 1 P.O.A 0.594PVCSPCL * PVC Spray Citrus Cleaner 467g ‐ 6 1 P.O.A 0.556
Magic Corner Kit Includes spray adhesive and installation tool.
Spray Adhesive & Cleaner
PVCCB 10/13
PVCCIN135
PVCGA
PVC TRIM
PVCEXJ10 PVCEXJH PVCL10T
PVCCIN 90
PVCCEX 135
PVCCEX90
PVCSL10T PVCABEX 90
PVCAB L16
PVCABL145PVCL145PVCABL80
PVC SL10TF
PVCFC89
PVCMAG
PVCL80
PVCSB13
PVCMAG35
* Denotes lead times and minimum order quantity may apply PAGE 26
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part LENGTH STOCK SUB PRICE ApproxNo. (mm) PACK PACK EACH kg/piece
Provides Shadowline detail without using SL10 Stopping AngleAASM64 * 64mm SHADOWMAX™ Shadowline Track 3600 60 1 P.O.A 2.387
All‐in‐one Furring Channel Wall Track with Shadowline detailAASM10 * M29/10mm board SHADOWMAX™ Shadowline Wall Track 3600 150 1 P.O.A 0.950AASM13 * M29/13mm board SHADOWMAX™ Shadowline Wall Track 3600 150 1 P.O.A 1.140
Part LENGTH STOCK SUB PRICE Approx
SKIRTING & FLAT BARSKIRTING
SHADOWMAX™
AASM64 AASM10/13
Part LENGTH STOCK SUB PRICE ApproxNo. (mm) PACK PACK EACH kg/piece
AASK100A28 100mm Skirting 10µm Clear Anodised x 2.8m 2800 200 10 P.O.A 1.260AASK100A36 * 100mm Skirting 10µm Clear Anodised x 3.6m 3600 200 10 P.O.A 1.620AASK100B28 * 100mm Skirting Satin Black x 2.8m 2800 200 10 P.O.A 1.260AASK100B36 * 100mm Skirting Satin Black x 3.6m 3600 200 10 P.O.A 1.620AASK150A28 * 150mm Skirting 10µm Clear Anodised x 2.8m 2800 200 10 P.O.A 1.880AASK150A36 * 150mm Skirting 10µm Clear Anodised x 3.6m 3600 200 10 P.O.A 2.420AASK150B28 * 150mm Skirting Satin Black x 2.8m 2800 200 10 P.O.A 2.420
AASKTB100 13mm Cover Tape Black x 100m Roll 100m ‐ ‐ P.O.A 0.805AASKTG100 13mm Cover Tape Grey x 100m Roll 100m ‐ ‐ P.O.A 0.805AASKST100B Skirting Corner Stake Black x 100mm 100 50 1 P.O.A 0.010AASKST100G Skirting Corner Stake Grey x 100mm 100 50 1 P.O.A 0.010AASKST150B Skirting Corner Stake Black x 150mm 150 50 1 P.O.A 0.010AASKST150G Skirting Corner Stake Grey x 150mm 150 50 1 P.O.A 0.010
AASKSC1 Skirting Screws ‐ 6g x 1/2 Pan Head CTS z/p ‐ Box 1000 P.O.A. 0.990
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
AAFB25A28 * Flat Bar 25 x 1.6m 10µm Clear Anodised x 2.8m 2800 20 1 3.50 P.O.A 0.300AAFB25B28 * Flat Bar 25 x 1.6m Satin Black x 2.8m 2800 20 1 4.50 P.O.A 0.300
SKIRTING
FLAT BAR
Skirting
Cover Tape
Corner Stakes
Flat BarSkirting Screws
AASM64 AASM10/13
* Denotes lead times and minimum order quantity may apply PAGE 27
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part LENGTH SUB PRICE ApproxNo. (mm) PACK EACH kg/piece
FC79‐27 EZY CAP 79 x 0.8 x 2700mm. (Suits 51mm stud + 13 + 13) 2700 1 P.O.A 2.250FC86‐27 EZY CAP 86 x 0.8 x 2700mm. (Suits 64mm stud + 10 + 10) 2700 1 P.O.A 2.510FC92‐27 EZY CAP 92 x 0.8 x 2700mm. (Suits 64mm stud + 13 + 13) 2700 1 P.O.A 2.610FC98‐27 EZY CAP 98 x 0.8 x 2700mm. (Suits 76mm stud + 10 + 10) 2700 1 P.O.A 2.710FC104‐27 EZY CAP 104 x 0.8 x 2700mm. (Suits 76mm stud + 13 + 13) 2700 1 P.O.A 2.800FC112‐27 EZY CAP 112 x 0.8 x 2700mm. (Suits 92mm stud + 10 + 10) 2700 1 P.O.A 2.930FC118‐27 EZY CAP 118 x 0.8 x 2700mm. (Suits 92mm stud + 13 + 13) 2700 1 P.O.A 3.030FC127‐27 EZY CAP 127 x 0.8 x 2700mm. (Suits 92mm stud + 16 + 16) 2700 1 P.O.A 3.090
Part LENGTH STOCK SUB PRICE ApproxNo. (mm) PACK PACK EACH kg/piece
RA20‐30 20mm x 0.75 BMT 3000 25 1 P.O.A 0.979RA20‐36 3600 25 1 P.O.A 1.175
EZY CAP™
EZY REVEAL™
RA20 36 3600 25 1 P.O.A 1.175RA25‐30 25mm x 0.75 BMT 3000 25 1 P.O.A 1.070RA25‐36 3600 25 1 P.O.A 1.284RA35‐30 35mm x 0.75 BMT 3000 25 1 P.O.A 1.251RA35‐36 3600 25 1 P.O.A 1.501RA50‐30 50mm x 0.75 BMT 3000 25 1 P.O.A 1.523RA50‐36 3600 25 1 P.O.A 1.828RA60‐30 60mm x 0.75 BMT 3000 25 1 P.O.A 1.705RA60‐36 3600 25 1 P.O.A 2.046RA65‐30 65mm x 0.75 BMT 3000 25 1 P.O.A 1.705RA65‐36 3600 25 1 P.O.A 2.045RA75‐30 75mm x 0.75 BMT 3000 25 1 P.O.A 1.977RA75‐36 3600 25 1 P.O.A 2.372RA80‐30 80mm x 0.75 BMT 3000 25 1 P.O.A 2.067RA80‐36 3600 25 1 P.O.A 2.481RA90‐30 90mm x 0.75 BMT 3000 25 1 P.O.A 2.249RA90‐36 3600 25 1 P.O.A 2.698RA100‐30 100mm x 0.75 BMT 3000 25 1 P.O.A 2.430RA100‐36 3600 25 1 P.O.A 2.916RA110‐30 110mm x 0.75 BMT 3000 25 1 P.O.A 2.611RA110‐36 3600 25 1 P.O.A 3.133RA120‐30 120mm x 0.75 BMT 3000 25 1 P.O.A 2.793RA120‐36 3600 25 1 P.O.A 3.351RA150‐30 150mm x 0.75 BMT 3000 25 1 P.O.A 3.355RA150‐36 3600 25 1 P.O.A 4.026PVCTRIM PVC finish trim to create custom reveal sizes 3000 30 1 P.O.A 0.110
* Denotes lead times and minimum order quantity may apply PAGE 28
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Custom finishing and capping of plasterboard is made easy with Fastcaps® range of custom made finishing sections. Our custom design andconsultancy team is ready to help design and produce an innovative solution to your requirements for any size project. Fastcaps® custom finishing section make the finishing of difficult plasterboard profiles, rebates and large oversized shadowlines a dream.
Enquire now for a fast solution to all your requirements.
Custom Finishing Sections
Custom Rebates & Profiles
Custom finishing and capping of plasterboard is made easy with Fastcaps® range of custom made finishing sections. Our custom design andconsultancy team is ready to help design and produce an innovative solution to your requirements for any size project. Fastcaps® custom finishing section make the finishing of difficult plasterboard profiles, rebates and large oversized shadowlines a dream.
Enquire now for a fast solution to all your requirements.
Custom Finishing Sections
The Flush Finish Cavity Slider
Standard Cavkit
Optional Cavkit
Cavkit can be used to transform standard cavity sliders into architrave free, flush finish cavity sliders. This also compliments and tones in with the Ezyjamb® flush finish door jamb system. The Cavkit is made up of Ezyreveal® and Ezycap® to trim and cap the plaster edges around the door penetration. Custom made closer cap can be produced to suit any specification.
For more information visit the Ezyjamb website. www.ezyjamb.com.au
Custom Sizes Manufactured to your project requirements
Custom Shadowline
Custom Rebates & Profiles
* Denotes lead times and minimum order quantity may apply PAGE 29
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
* Denotes lead times and minimum order quantity may apply PAGE 30
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
* Denotes lead times and minimum order quantity may apply PAGE 31
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Available in a range of standard sizes, these are the most economical metal door framesfor dry wall applications. Stud clips are available to suit linings of 6mm, 10mm, 13mm and 16mm.Suitable for non rated applications.Lead times apply.
DFS
An alternative method for concealed fixing of standard metal door frames. May be used with steelor timber studs and is suitable for non rated applications. Can be supplied to suit one hour firerated applications upon request.Lead times apply.
No need to bother with fiddly stud clips. New Generation frames take the hassle out of installing metal door frames in dry wall applications. A recess is formed within the frame for the plasterboardedges to slide into saving time and giving a neat finish.Available in a range of standard sizes to suit STUDCO metal stud profiles and standard plasterboardsizes. Custom size frames can be made to order. Suitable for use in non‐rated partition walls.Can be supplied to suit fire rated applications upon request Lead times apply DFN
PRESSED METAL DOOR FRAMESStandard Door Frame with stud clip fixing
Standard Door Frame with Strap Fixing
New Generation Door Frames
Stud Clip
Can be supplied to suit fire rated applications upon request. Lead times apply. DFN
Partition Dry Wall Frames are made to order and to suit your requirements.Suitable for use in non‐rated applications. Can also be supplied to suit one, two and threehour fire rated plasterboard partition walls upon request.Lead times apply.
Partition Dry Wall Door Frames
Other Frame Types
General Notes on Door Frames
Stud Clip
Wire Brick TiesTube Fixing for Masonry Walls Single Rebate Exterior Brick Veneer
Wall Door Frame
Unless specified otherwise frames will be supplied in assembled form in 1.1mm zinc anneal with 2 off 100 x 75 zinc plated heavy duty hinges welded to the frame and preparation for 1 only Universal striker at standard height.Frames can also be supplied in knock down (dissasembled) form or fully welded, dressed and primed if requested.For FIRE RATED applications please ensure this is specified at time of ordering. Door frames are generally made to order therefore no returns will be accepted and no order cancellations will be accepted after production of frames has commenced.
Custom frames can be supplied to suit all applications.
* Denotes lead times and minimum order quantity may apply PAGE 32
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
APMSB2020 200 x200 set bead 4 1 59.00 1.520APMSB3030 300 x 300 set bead 4 1 62.00 2.280APMSB4040 * 400 x 400 set bead 4 1 82.00 3.040APMSB4545 450 x 450 set bead 4 1 82.00 3.460APMSB4560 * 450 x 600 set bead 4 1 145.00 3.810APMSB5555 550 x 550 set bead 2 1 98.00 4.380APMSB6060 600 x 600 set bead 2 1 102.00 4.920
APMFL2020 200 x200 exposed flange 4 1 59.00 1.520APMFL3030 300 x300 exposed flange 4 1 62.00 2.280APMFL4040 * 400 x 400 exposed flange 4 1 82.00 3.040APMFL4545 450 x 450 exposed flange 4 1 82.00 3.460APMFL4560 * 450 x 600 exposed flange 4 1 145.00 3.810APMFL5555 550 x 550 exposed flange 2 1 98.00 4.380APMFL6060 600 x 600 exposed flange 2 1 102.00 4.920
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
MDF ‐ Non Rated
MDF ‐ Rw33 Sound Rated
ACCESS PANELS
MDF removable door with concealed hinges & budget lock
Large range of standard sizes!
APMWSB3030 * 300 x 300 set bead 4 1 88.00 2.690APMWSB4545 * 450 x 450 set bead 2 1 116.00 4.040APMWSB6060 * 600 x 600 set bead 1 1 148.00 5.380
APMWFL3030 * 300 x 300 exposed flange 4 1 88.00 2.690APMWFL4545 * 450 x 450 exposed flange 2 1 116.00 4.040APMWFL6060 * 600 x 600 exposed flange 1 1 148.00 5.380
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
APMTLSB2020 * 200 x 200 set bead 4 1 88.00 0.982APMTLSB3030 * 300 x 300 set bead 4 1 92.00 1.886APMTLSB4545 * 450 x 450 set bead 2 1 108.00 3.520APMTLSB6060 * 600 x 600 set bead 2 1 124.00 6.080
MDF ‐ with Tip Latch
MDF removable door with concealed hinges & budget lock
Large range of standard sizes!
MDF door with concealed hinges & budget lock ‐ Rw33 (Rw+Ctr=32)
MDF door and metal frame with concealed hinges and tip latches
(Non Rated)
Custom size panels available upon request
* Denotes lead times and minimum order quantity may apply PAGE 33
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
APSSB2020 * 200 x 200 set bead 4 1 59.00 0.072APSSB3030 300 x 300 set bead 4 1 62.00 1.170APSSB4040 * 400 x 400 set bead 4 1 82.00 2.070APSSB4545 450 x 450 set bead 4 1 82.00 2.330APSSB4560 * 450 x 600 set bead 4 1 145.00 2.570APSSB5555 550 x 550 set bead 4 1 98.00 2.853APSSB6060 600 x 600 set bead 4 1 102.00 3.120APSSB60120 * 600 x 1200 set bead 1 1 295.00 4.680
APSFL2020 * 200 x 200 exposed flange 4 1 59.00 1.400APSFL3030 300 x 300 exposed flange 4 1 62.00 2.100APSFL4040 * 400 x 400 exposed flange 4 1 82.00 2.800APSFL4545 450 x 450 exposed flange 4 1 82.00 3.150APSFL4560 * 450 x 600 exposed flange 4 1 145.00 3.720APSFL5555 550 x 550 exposed flange 4 1 98.00 3.850APSFL6060 600 x 600 exposed flange 4 1 102.00 4.200APSFL60120 * 600 x 1200 exposed flange 1 1 295.00 6.300
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
APSWSB3030 * 300 x 300 set bead 4 1 88.00 2.210APSWSB4545 * 450 x 450 set bead 4 1 128.00 3.540APSWSB6060 * 600 x 600 set bead 2 1 168.00 4.920
METAL ‐ Non Rated
METAL ‐ Rw30 Sound Rated
Metal door with concealed hinges & budget lock
Large range of standard sizes!
APSWFL3030 * 300 x300 exposed flange 4 1 88.00 2.210APSWFL4545 * 450 x 450 exposed flange 4 1 128.00 3.540APSWFL6060 * 600 x 600 exposed flange 2 1 168.00 4.920
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
APSTLSB2020 * 200 x 200 set bead 4 1 85.00 1.520APSTLSB3030 * 300 x 300 set bead 4 1 91.00 2.330APSTLSB4545 * 450 x 450 set bead 4 1 104.00 3.190APSTLSB4560 * 450 x 600 set bead 4 1 118.00 3.780APSTLSB6060 * 600 x 600 set bead 4 1 118.00 4.370
METAL ‐ with Tip Latch
Metal door with concealed hinges & budget lock ‐ Rw30
Metal door with concealed hinges & budget lock
Large range of standard sizes!
Metal door and frame with concealed hinges and tip latches
(Non Rated)
Custom size panels available upon request
* Denotes lead times and minimum order quantity may apply PAGE 34
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
APF1SB3030 * 300 x 300 set bead 1 1 320.00 3.800APF1SB4545 * 450 x 450 set bead 1 1 390.00 5.700APF1SB6060 * 600 x 600 set bead 1 1 483.00 8.000
APF1FL3030 * 300 x300 exposed flange 1 1 320.00 3.800APF1FL4545 * 450 x 450 exposed flange 1 1 390.00 5.700APF1FL6060 * 600 x 600 exposed flange 1 1 483.00 8.000
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
APF2SB3030 * 300 x 300 set bead 1 1 299.00 4.200APF2SB4545 * 450 x 450 set bead 1 1 391.00 7.800APF2SB6060 * 600 x 600 set bead 1 1 506.00 14.400
APF2FL3030 * 300 x 300 exposed flange 1 1 299.00 4.200APF2FL4545 * 450 x 450 exposed flange 1 1 391.00 7.800APF2FL6060 * 600 x 600 exposed flange 1 1 506.00 14.400
FIRE RATED PANELS ‐ 1 HOUR
FIRE RATED PANELS ‐ 2 HOUR
Hinged Panel with Budget Lock
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
Steel Frame:APTSPA2020 * Steel Frame 200 x 200 1 1 190.00 1.290APTSPA3030 * Steel Frame 300 x 300 1 1 210.00 1.930APTSPA3045 * Steel Frame 300 x 450 1 1 230.00 2.530APTSPA4545 * Steel Frame 450 x 450 1 1 280.00 2.890
Stainless Steel Frame:APTSPASS2020 * Stainless Frame 200 x 200 1 1 260.00 1.290APTSPASS3030 * Stainless Frame 300 x 300 1 1 290.00 1.930APTSPASS4545 * Stainless Frame 450 x 450 1 1 330.00 2.890
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
MHF3030 300 x 300 10 1 27.00 0.410MHF4040 * 400 x 400 10 1 32.00 0.500MHF4545 450 x 450 10 1 34.00 0.600MHF5555 550 x 550 10 1 39.00 0.710MHF6045 * 600 x 450 10 1 37.00 0.750MHF6060 600 x 600 10 1 41.00 0.800MHF12060 * 1200 x 600 10 1 54.00 1.400
TILE / SPA PANELS
ALUMINIUM MANHOLE FRAMES
Fibre cement door with steel frame & recessed face to give flush tiled finish.
Hinged with screw type lock.
Hinged Panel with Budget Lock
Screw Fixed Panel
* Denotes lead times and minimum order quantity may apply PAGE 35
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part Length Width SUB PRICE Approx ApproxNo. mm mm PACK EACH $ l/m kg/piece
SEMDF6410‐27 Suits 64mm stud + 10mm plaster 2700 91 1 16.13 5.97 3.800SEMDF6413‐27 Suits 64mm stud + 13mm plaster 2700 97 1 16.13 5.97 4.100SEMDF7610‐27 Suits 76mm stud + 10mm plaster 2700 103 1 18.73 6.94 4.300SEMDF7613‐27 Suits 76mm stud + 13mm plaster 2700 109 1 18.73 6.94 4.500SEMDF9210‐27 Suits 92mm stud + 10mm plaster 2700 119 1 20.56 7.61 5.000SEMDF9213‐27 Suits 92mm stud + 13mm plaster 2700 125 1 20.56 7.61 5.500
Part Length STOCK SUB PRICE ApproxNo. m PACK PACK EACH kg/piece
TPM5090 Easy Tape ‐ 50mm Self Adhesive Fibreglass 90 24 1 5.95 Nett 0.350TPP5075 Paper Tape ‐ 50mm Perforated 75 20 1 2.95 Nett 0.600TPP50150 Paper Tape ‐ 50mm Perforated 150 10 1 5.95 Nett 0.900INFT4850 Aluminium Foil Tape 48mm x 50m roll 50 24 1 P.O.A ‐ 0.198INFTA001 * Aluminium Foil Tape 72mm x 50m roll 50 16 1 P.O.A ‐ 0.290INFTA002 * White Foil Tape 72mm x 50m roll 50 16 1 P.O.A ‐ 0.290
TPFP5‐24 * PVC Foam Tape ‐ Adhesive 4.8mm x 24mm x 15.2m Roll 15.2 24 1 P.O.A ‐ ‐
MDF STOP ENDS
TAPES
PLASTERING ACCESSORIES& TOOLS
TPFP5 24 PVC Foam Tape Adhesive 4.8mm x 24mm x 15.2m Roll 15.2 24 1 P.O.ATPFP5‐60 * PVC Foam Tape ‐ Adhesive 4.8mm x 60mm x 15.2m Roll 15.2 8 1 P.O.A ‐ ‐
TPFE3‐48 *EPDM Foam Tape ‐ Adhesive 3.2mm x 48mm x 25m Roll
(Express Wall Vertical Gasket) 25 5 1 P.O.A ‐ ‐
TPFN3‐18 *PVC Nitrile Foam Tape ‐ Adhesive 3.0mm x 18mm x 9m Roll
(Express Wall Horizontal Gasket) 9 16 1 P.O.A ‐ ‐
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
PACBBC45 Boral ‐ Base Cote 45 20kg bag 1 1 P.O.A 20.000PACBBC60 Boral ‐ Base Cote 60 20kg bag 1 1 P.O.A 20.000PACBBC90 Boral ‐ Base Cote 90 20kg bag 1 1 P.O.A 20.000PACBCA45 Boral ‐ Cornice Adhesive 45 20kg bag 1 1 P.O.A 20.000PACBCA60 Boral ‐ Cornice Adhesive 60 20kg bag 1 1 P.O.A 20.000PACBFC Boral ‐ Final Cote ‐ (Top coat) 20kg bucket 1 1 P.O.A 20.000
PASASTUD Rocor ‐ Stud Adhesive bucket 5.2kg 1 1 P.O.A 5.200
PLASTERBOARD COMPOUNDS
Easy TapePaper Tape Foam TapeFoil Tape
STUD ADHESIVE
* Denotes lead times and minimum order quantity may apply PAGE 36
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
PASACG1 Cartridge Caulking Gun "Little Red" for 300ml cartridges 1 1 P.O.A 0.520PASASG Sausage Barrell Caulking Gun (unmodified) for 600ml sausages 1 1 P.O.A 1.000PASASGN Sausage Gun Nozzle clear point in packs of 10 10 10 P.O.A 0.210PASA750 Fuller 750 Multi Purpose translucent Silicone 300g 20 1 P.O.A 0.370PASAFSS Fuller Firesound Acrylic Sealant Sausage 600ml 15 1 P.O.A 0.950
PASAFFR FULAFOAM Fire Retardent Expanding Foam 500g 12 1 P.O.A 0.630PASAFF500 FULAFOAM ‐ Triple Expanding 500ml 12 1 P.O.A 0.628PASAGF Fuller Gap Filler White 450g 20 1 P.O.A 0.510PASAMAX Max Bond Adhesive Cartridge 320g 20 1 P.O.A 0.370
PASAMAXFGS Max Bond Fast Grip Adhesive Sausage 600ml 15 1 P.O.A 0.960PASAS101B * SuperSeal 101 Polyurethane Joint Sealant 600ml Sausage Black 20 1 P.O.A 0.950PASAS101G * SuperSeal 101 Polyurethane Joint Sealant 600ml Sausage Grey 20 1 P.O.A 0.950
PASASPSB Sikaflex Pro ‐ PU Joint Sealant 600ml Sausage Black 20 1 P.O.A 0.950PASASPSG Sikaflex Pro ‐ PU Joint Sealant 600ml Sausage Grey 20 1 P.O.A 0.950PASASPSW Sikaflex Pro ‐ PU Joint Sealant 600ml Sausage White 20 1 P.O.A 0.950PASABRO16 Sika Foam Backing Rod (Open Cell) 16mm x 150m Roll 4 1 P.O.A 1.092
SEALANTS & ADHESIVES
PASABRO16 Sika Foam Backing Rod (Open Cell) 16mm x 150m Roll 4 1 P.O.A 1.092PASABRO22 Sika Foam Backing Rod (Open Cell) 22mm x 100m Roll 3 1 P.O.A 1.120PASASPFR * Sika Firerate ‐ PU Fire Resistant Sealant Sausage 600ml 12 1 P.O.A 0.940
Cartridge Caulking Gun
Sausage Caulking Gun Backing Rod
* Denotes lead times and minimum order quantity may apply PAGE 37
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part STOCK SUBNo. PACK PACK
PASP100 Sandpaper Sheet Small (85 x 305mm) 120 grit ‐ Pack of 20 25 20PASP101 Sandpaper Sheet Small (85 x 305mm) 150 grit ‐ Pack of 20 25 20PASP102 Sandpaper Sheet Small (85 x 305mm) 180 grit ‐ Pack of 20 25 20PASP103 * Sandpaper Sheet Large (110 x 370mm) 120 grit ‐ Pack of 20 25 20PASP104 * Sandpaper Sheet Large (110 x 370mm) 150 grit ‐ Pack of 20 25 20PASP105 * Sandpaper Sheet Large (110 x 370mm) 180 grit ‐ Pack of 20 25 20
PASP200 Super Pads 225mm x 120 grit ‐ Pack of 5 20 5PASP201 Super Pads 225mm x 150 grit ‐ Pack of 5 20 5PASP202 Super Pads 225mm x 180 grit ‐ Pack of 5 20 5PASP203 Super Pads 225mm x 220 grit ‐ Pack of 5 20 5
PASP300 Sanding Block Small Fine/Med 110 x 68 x 26mm 12 1PASP301 Sanding Block Small Med/Coarse 110 x 68 x 26mm 10 1PASP305 Sanding Block Angled Fine/Med 125 x 70 x 25mm 100 1PASP308 Sanding Block Jumbo Fine/Med 225 x 76 x 25mm 100 1PASP310 Sanding Sponge Fine 140mm x 115mm x 5mm 50 1
Part STOCK SUBNo. PACK PACK
ABRASIVES
HAND SANDERS PATLS001
PASP308 PASP300 PASP305
PASP310
PASP2
PASP1
No. PACK PACKPATLS001 Hand Sander Small Plastic 230mm 10 1PATLS002 HYDE Hand Sander Polypropylene Base 230mm 5 1
Part STOCK SUBNo. PACK PACK
PAPENCIL Carpenters Pencil Medium Lead 50 1PATM1 Sterling V‐Force 25mm x 8m 25 8PATM2 Faststud MegaGrip with Magnetic tip 25mm x 10m 25 10
Part SUBNo. PACK
PADM1 Dust & Mist Mask ‐ P1 Aust Standard Pack of 20 20PADM2 Dust & Mist Mask ‐ P2 with Valve Pack of 12 12
Part SUBNo. PACK
PATLSCI Intex Stud Crimper 1PATLSP Stud Punch ‐ Punches a 34mm service hole in studs. 1
PATLSPG1 Stud Punch Insert‐ Easy Snap in Grommet‐Pack 100 100
STUD CRIMPERS & HOLE PUNCH
DUST MASKS
PENCILS & TAPE MEASURES
PATLSCI PATLSPPATLSPG1
Dust Masks
PATLS002
PATLS001
PASP308 PASP300 PASP305
PASP310
PASP2
PASP1
PATLTM2with Magnetic Tip
PATLTM1
* Denotes lead times and minimum order quantity may apply PAGE 38
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part SUBNo. PACK
PATLTSG Aviation Tin Snips ‐ Right Cut ‐ GREEN 1PATLTSR Aviation Tin Snips ‐ Left Cut ‐ RED 1PATLTSY Aviation Tin Snips ‐ Straight Cut ‐ YELLOW 1
Part SUBNo. PACK
PATLRG1 Riveting Tool 1
Part SUBNo. PACK
PATLBC350 * Bolt Cutters 350mm 1PATLBC450 * Bolt Cutters 450mm 1
Part SUBKNIVES & BLADES
BOLT CUTTERS
TIN SNIPS
RIVETING TOOL
PATLTS
PATLRG1
PATLBC350
Part SUBNo. PACK
PATLKN1 Shark Fixed Trimming knife 1PATLKN2 Plastic Cutter 18mm with snap off blade 1PATLKN3 Folding QuickLoc Knife with rubber grip and belt clip 1PATLKNB1 Blades ‐ Trimming Knife ‐ Dispenser of 10 10
Part SUBNo. PACK
STRRAT25‐5 Ratchet Strap Light Duty 25mm x 5.0m 1STRRAT50‐9 Ratchet Strap Heavy Duty 50mm x 9.0m ‐ Rated to 2500kg 1
Part SUBNo. PACK
PAPC1 * Plasterboard Cart ‐ DC1350 1The DC1350 Plasterboard Cart has a strong A‐Frame designed to carry up to 1350kg. It boasts two lockable castor wheels offering exceptional maneuverability and dismantles to fit in the boot of most cars.
Part SUBNo. PACK
SCSN01 Snappy Scaffold Kit 1SCSN02 Hand Rail for Snappy Scaffold 1
KNIVES & BLADES
RATCHET STRAPS
SNAPPY SCAFFOLD
PLASTERBOARD CART
PATLTS
PATLKN2 PATLKN1
SCSN01
Snappy Collapsable Scaffold Kit
PATLKN3
PATLKNB1
Ratchet Straps
PATLRG1
PATLBC350
DC‐1350
* Denotes lead times and minimum order quantity may apply PAGE 39
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part BOX PRICE ApproxNo. QTY EACH kg/piece
BUTTON HEAD NEEDLE POINT STITCHING SCREW ZPSDBT0813 8g‐15 x 13 1000 P.O.A 1.640SDBT0816 8g‐15 x 16 1000 P.O.A 1.740SDBT0825 8g‐15 x 25 1000 P.O.A 2.560SDBT0832 8g‐15 x 32 1000 P.O.A 3.100
BUTTON HEAD SELF DRILLING SCREW ZPSDBTD0812 8g‐18 x 12 1000 P.O.A 1.600SDBTD0816 8g‐18 x 16 1000 P.O.A 1.900SDBTD0825 8g‐18 x 25 1000 P.O.A 2.510SDBTD0830 8g‐18 x 30 1000 P.O.A 3.100
PANCAKE (FLAT TOP) HEAD SELF DRILLING SCREW ZPSDFTD1016 10g‐16 x 16 1000 P.O.A 1.460
Part BOX PRICE ApproxNo. QTY EACH kg/piece
BUGLE HEAD NEEDLE POINT DRYWALL SCREW ZPSDBG0625 6g‐18 x 25 1000 P.O.A 1.350SDBG0632 6g‐18 x 32 1000 P.O.A 1.600SDBG0641 6g‐18 x 41 1000 P.O.A 2.000SDBG0645 6g‐18 x 45 1000 P.O.A 2.200
FRAMING SCREWS
PLASTERBOARD SCREWS ‐ LOOSE
FASTENERS
SDBG0645 6g 18 x 45 1000 P.O.A 2.200SDBG0751 7g‐18 x 51 1000 P.O.A 2.800SDBG0865 8g‐15 x 65 500 P.O.A 2.100SDBG0875 8g‐15 x 75 500 P.O.A 2.450SDBG10100 10g ‐12 x 100 500 P.O.A 2.300
BUGLE HEAD SELF DRILLING DRYWALL SCREW ZPSDBGD0625 6g‐20 x 25 1000 P.O.A 1.500SDBGD0632 6g‐20 x 32 1000 P.O.A 1.830SDBGD0645 6g‐20 x 45 1000 P.O.A 2.500
BUGLE HEAD COARSE LAMINATING NEEDLE PT. SCREW ZP (GRABBER SCREW)SPBG1040L 10g‐10 x 40 1000 P.O.A 3.546SPBG1050L 10g‐10 x 50 1000 P.O.A 4.320SPBG1065L 10g‐10 x 65 1000 P.O.A 3.012
Part BOX PRICE ApproxNo. QTY EACH kg/piece
COLLATED BUGLE HD. NEEDLE POINT DRYWALL SCREW ZPSDBGC0625 6g‐18 x 25 1000 P.O.A 1.610SDBGC0632 6g‐18 x 32 1000 P.O.A 1.910SDBGC0641 6g‐18 x 41 1000 P.O.A 2.300
COLLATED BUGLE HD. SELF DRILLING DRYWALL SCREW ZP SDBGCD0625 6g‐20 x 25 1000 P.O.A 1.610SDBGCD0632 6g‐20 x 32 1000 P.O.A 1.910SDBGCD0641 6g‐20 x 41 1000 P.O.A 2.300
COLLATED BUGLE HD. COARSE NEEDLE POINT DRYWALL SCREW ZPSDBGC0625C 6g‐9 x 25 1000 P.O.A 1.610SDBGC0632C 6g‐9 x 32 1000 P.O.A 1.910SDBGC0641C 6g‐9 x 41 1000 P.O.A 2.300
COLLATED BUGLE HD. COARSE LAMINATING NEEDLE PT. SCREW ZP (GRABBER SCREW)SDBGC1040L * 10g‐20 x 40 500 P.O.A 3.456SDBGC1050L 10g‐20 x 50 500 P.O.A 2.330
PLASTERBOARD SCREWS ‐ COLLATED
* Denotes lead times and minimum order quantity may apply PAGE 40
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part BOX PRICE ApproxNo. QTY EACH kg/piece
CSK. SELF EMBEDDING NEEDLE POINT VILLABOARD (FIBRE CEMENT) SCREW ZPSVCS0820 8g‐15 x 20 1000 P.O.A 1.460SVCS0830 8g‐15 x 30 1000 P.O.A 2.270
CSK. SELF EMBEDDING SELF DRILLING VILLABOARD (FIBRE CEMENT) SCREW ZP SVCSD0820 8g‐15 x 20 1000 P.O.A 1.700SVCSD0825 8g‐15 x 25 1000 P.O.A 1.920SVCSD0830 8g‐15 x 30 1000 P.O.A 2.260
CSK. SELF EMBEDDING SELF DRILLING VILLABOARD (FIBRE CEMENT) SCREW GAL. CLASS 3SVCSD0820G 8g‐18 x 20 1000 P.O.A 1.740
CSK. SELF DRILLING BLUEBOARD (FIBRE CEMENT) WINGTEK SCREW, GAL. CLASS 3SVCSD0832GW 8g‐18 x 32 1000 P.O.A 2.320
Part BOX PRICE ApproxNo. QTY EACH kg/piece
CSK. SELF EMBEDDING NEEDLE PT VILLABOARD / FIBRE CEMENT SCREWSDBGC0820V 8g‐15 x 20 1000 P.O.A 1.730SDBGC0830V 8g‐15 x 30 1000 P.O.A 2.330
CSK. SELF EMBEDDING DRILL PT VILLABOARD / FIBRE CEMENT SCREWSDBGCD0820V 8g‐15 x 20 1000 P.O.A 1.689SDBGCD0830V * 8g‐15 x 30 1000 P.O.A 2.596
FIBRE CEMENT SCREWS ‐ LOOSE
FIBRE CEMENT SCREWS ‐ COLLATED
SDBGCD0830V 8g 15 x 30 1000 P.O.A 2.596
Part BOX PRICE ApproxNo. QTY EACH kg/piece
SELF DRILLING SCREW HEX HEAD ZP CLASS 2(All screws fully threaded unless otherwise noted)
SRHD0820 8g‐18 x 20 1000 P.O.A 2.280SRHD1016 10g‐16 x 16 1000 P.O.A 3.130SRHD1020 10g‐20 x 20 1000 P.O.A 3.300SRHD1220 12g‐24 x 20 1000 P.O.A 4.750
SELF DRILLING SCREW HEX HEAD GAL. CLASS 3(All screws fully threaded unless otherwise noted)
SRHD0812G 8g‐18 x 12 1000 P.O.A 1.800SRHD1016G 10g‐16 x 16 1000 P.O.A 3.070SRHD1020G 10g‐16 x 20 1000 P.O.A 3.390SRHD1025G 10g‐16 x 25 1000 P.O.A 3.880SRHD1220G 12g‐14 x 20 1000 P.O.A 4.750SRHD1235G 12g‐14 x 35 500 P.O.A 3.420SRHD1245G 12g‐14 x 45 500 P.O.A 4.250SRHD1275G 12g‐14 x 75 200 P.O.A 2.170
TYPE 17 SCREW HEX HEAD GAL. CLASS 3SPH1225G 12g‐11 x 25 1000 P.O.A 5.630SPH1250G 12g‐11 x 50 500 P.O.A 7.760
Part BOX PRICE ApproxNo. QTY EACH kg/piece
SELF DRILLING EXTENDED DRILL POINT HEX HEAD GAL. CLASS 3 SCREW(All screws fully threaded)SRHDE1232G 12g‐24 x 32 500 P.O.A 3.330SRHDE1250G 12g‐24 x 50 500 P.O.A 4.440SRHDE1265G * 12g‐24 x 65 250 P.O.A 2.850
ROOFING SCREWS
EXTENDED DRILL POINT SCREWS ‐ SERIES 500
All sizes also available with Neoprene Washer
All sizes also available with Neoprene Washer
* Denotes lead times and minimum order quantity may apply PAGE 41
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part BOX PRICE ApproxNo. QTY EACH kg/piece
Hooked Rod Suspension AnchorCSA6‐60 6mm x 60mm 100 P.O.A 1.140CSA6‐120 6mm x 120mm 100 P.O.A 2.530
Threaded Rod Suspension AnchorCSA6‐60‐T6 M6 Thread ‐ 6mm x 60mm 100 P.O.A 1.858
Drive Pin Suspension Angle Bracket BRDP 25mm x 30mm 100 P.O.A. 1.402
Part SUB PRICE ApproxNo. PACK EACH kg/piece
SRB06Z1 * M6 Booker Rod ‐ Fully Threaded Zinc Plated x 1.0m 10 P.O.A 1.800SRB06Z3 * M6 Booker Rod ‐ Fully Threaded Zinc Plated x 3.0m 10 P.O.A 5.000SRB08Z1 * M8 Booker Rod ‐ Fully Threaded Zinc Plated x 1.0m 10 P.O.A 3.000SRB08Z3 * M8 Booker Rod ‐ Fully Threaded Zinc Plated x 3.0m 10 P.O.A 9.000SRB10Z1 * M10 Booker Rod ‐ Fully Threaded Zinc Plated x 1.0m 10 P.O.A 5.000SRB10Z3 * M10 Booker Rod ‐ Fully Threaded Zinc Plated x 3.0m 10 P.O.A 14.500SRB12Z1 * M12 Booker Rod ‐ Fully Threaded Zinc Plated x 1.0m 5 P.O.A 3.500SRB12Z3 * M12 Booker Rod ‐ Fully Threaded Zinc Plated x 3.0m 5 P.O.A 10.500SRB16Z1 * M16 Booker Rod ‐ Fully Threaded Zinc Plated x 1.0m 5 P.O.A 6.300
BOOKER ROD
CEILING SUSPENSION ANCHORS
SRB16Z1 M16 Booker Rod Fully Threaded Zinc Plated x 1.0m 5 P.O.A 6.300SRB16Z3 * M16 Booker Rod ‐ Fully Threaded Zinc Plated x 3.0m 5 P.O.A 19.000SRB20Z1 * M20 Booker Rod ‐ Fully Threaded Zinc Plated x 1.0m 5 P.O.A 10.000SRB20Z3 * M20 Booker Rod ‐ Fully Threaded Zinc Plated x 3.0m 5 P.O.A 30.000
Part BOX PRICE ApproxNo. QTY EACH kg/piece
N‐M06 M6 Nuts ZP 100 Box 100 P.O.A 0.230N‐M08 M8 Nuts ZP 100 Box 100 P.O.A 0.680N‐M10 * M10 Nuts ZP 100 Box 100 P.O.A 0.930N‐M12 * M12 Nuts ZP 100 Box 100 P.O.A 1.320N‐M16 * M16 Nuts ZP 100 Box 100 P.O.A 1.580N‐M20 * M20 Nuts ZP 100 Box 100 P.O.A 1.750
SSH‐M10‐25 Set Screw (BOLT) M10 x 25mm ZP Hex Head ‐ For framing brackets 150 P.O.A 4.160W1024 Washer 10 X 24 Zinc Plated ‐ For framing brackets 100 P.O.A 0.492
Part BOX PRICE ApproxNo. QTY EACH kg/piece
PATLSTS10 Staples 10mm Box of 2000 2000 P.O.A 0.274
Part BOX PRICE ApproxNo. QTY EACH kg/piece
MBH065‐56G Masonbolt M4 x 56 Gal.(6.5mm hole) 100 P.O.A 1.342MBH08‐40G Masonbolt M6 x 40 Gal.(8mm hole) 100 P.O.A 1.536MBH08‐65G * Masonbolt M6 x 65 Gal.(8mm hole) 50 P.O.A 1.820MBH10‐60G * Masonbolt M8 x 60 Gal.(10mm hole) 50 P.O.A 1.920MBH10‐77G Masonbolt M8 x 77 Gal.(10mm hole) 50 P.O.A 2.480MBH12‐75G Masonbolt M10 x 75 Gal.(12mm hole) 50 P.O.A 3.500
STAPLES
MASONBOLTS
METRIC BOLTS, NUTS & WASHERS
* Denotes lead times and minimum order quantity may apply PAGE 42
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part BOX PRICE ApproxNo. QTY EACH kg/pieceMA25 6.5mm x 25 100 P.O.A 0.900MA30S * 6.0mm x 30 Stainless Pin 100 P.O.A 0.874MA32 6.5mm x 32 100 P.O.A 1.150MA32S * 6.5mm x 32 Stainless Pin 100 P.O.A 1.000MA40 6.5mm x 40 100 P.O.A 1.140MA50 6.5mm x 50 100 P.O.A 1.380MA75 6.5mm x 75 100 P.O.A 1.950
Part BOX PRICE ApproxNo. QTY EACH kg/piece
NPM6.5‐25 6.5mm x 25 100 P.O.A 0.270NPM6.5‐40 6.5mm x 40 100 P.O.A 0.380NPM6.5‐50 6.5mm x 50 100 P.O.A 0.480NPM6.5‐75 6.5mm x 75 100 P.O.A 0.810NPM6.5‐100 6.5mm x 100 50 P.O.A 0.610
Part PACK PRICE ApproxNo. QTY EACH kg/piece
FWPR50 6mm x 50 RED 50 P.O.A 0.070FWPG50 7mm x 50 GREEN 50 P.O.A 0.090FWPB50 8mm x 50 BLUE 50 P.O.A 0.110
NAIL IN PLUG ‐ NYLON
METAL PIN ANCHOR
WALL PLUGS
Drill size required 6.5mm
Drill size required 6.5mm
Part BOX PRICE ApproxNo. QTY EACH kg/pieceRIV1 1/8" x 4.8mm 1000 P.O.A 1.060RIV2 1/8" x 6.4mm 1000 P.O.A 1.040RIV3 1/8" x 8.0mm 1000 P.O.A 1.060RIV4 1/8" x 9.6mm 1000 P.O.A 1.130
DBJHD1/8Drill Bit‐ 1/8 Rivet Bits Double End Pack of 10
10 P.O.A. 0.032
PATLRG1 Riveting Tool 1 P.O.A 0.530
Part SUB PRICE ApproxNo. PACK EACH kg/piece
DB6‐110 Carbide Tip SDS Multi 6mm x 110 (suits 50mm drilling depth) 1 P.O.A 0.040DB6‐160 Carbide Tip SDS Multi 6mm x 160 (suits 100mm drilling depth) 1 P.O.A 0.050DB6‐210 Carbide Tip SDS Multi 6mm x 210 (suits 150mm drilling depth) 1 P.O.A 0.050DB6.5‐110 Carbide Tip SDS Multi 6.5mm x 110 (suits 50mm drilling depth) 1 P.O.A 0.040DB6.5‐160 Carbide Tip SDS Multi 6.5mm x 160 (suits 100mm drilling depth) 1 P.O.A 0.040DB8‐110 Carbide Tip SDS Multi 8mm x 110 (suits 50mm drilling depth) 1 P.O.A 0.040DB8‐160 Carbide Tip SDS Multi 8mm x 160 (suits 100mm drilling depth) 1 P.O.A 0.050DB8‐210 * Carbide Tip SDS Multi 8mm x 210 (suits 150mm drilling depth) 1 P.O.A 0.066DB10‐110 * Carbide Tip SDS Multi 10mm x 110 (suits 50mm drilling depth) 1 P.O.A 0.054DB10‐160 Carbide Tip SDS Multi 10mm x 160 (suits 100mm drilling depth) 1 P.O.A 0.064DB12‐160 Carbide Tip SDS Multi 12mm x 160 (suits 100mm drilling depth) 1 P.O.A 0.074DB12‐210 * Carbide Tip SDS Multi 12mm x 210 (suits 150mm drilling depth) 1 P.O.A 0.097DB12‐260 * Carbide Tip SDS Multi 12mm x 260 (suits 200mm drilling depth) 1 P.O.A 0.120
Part SUB PRICE Drill.No. PACK EACH Dia. Depth
DBCS5Shallow Cut Masonry Drill bit with Counter Sink Depth Gauge
1 P.O.A 5mm 9mm
MASONRY MULTI FIT DRILL BITS
RIVETS
FIBRE CEMENT DRILL BIT
Drill size required 6.5mm
Drill size required 6.5mm
* Denotes lead times and minimum order quantity may apply PAGE 43
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
PHILLIPS SCREWDRIVER BITSBITPS225 No.2 x 25 (screw gun tips) 10 1 P.O.A 0.005BITPS250 No.2 x 50 10 1 P.O.A 0.011BITPS275 No.2 x 75 10 1 P.O.A 0.016BITPS2100 No.2 x 100 10 1 P.O.A 0.021
PHILLIPS DRYWALL BITSBITPSD225 No.2 x 25 (with stopper) 10 1 P.O.A 0.014
HEX SOCKET INSERT BITBITHI550 Hex Socket Insert Bit 5mm x 50mm 10 1 P.O.A 0.010
MAGNETIC HEX SOCKETSBITMHL1/4 65mm long for 1/4" Hex Head Screws 10 1 P.O.A 0.030BITMHL5/16 65mm long for 5/16" Hex Head Screw 10 1 P.O.A 0.030BITMHL3/8 65mm long for 3/8" Hex Head Screws 10 1 P.O.A 0.030BITMHS1/4 42mm long for 1/4" Hex Head Screws 10 1 P.O.A 0.016
/ l f / " d
BITS ‐ PHILLIPS & HEX
BITMHS5/16 42mm long for 5/16" Hex Head Screw 10 1 P.O.A 0.020BITMHS3/8 42mm long for 3/8" Hex Head Screws 10 1 P.O.A 0.020
MAGNETIC BIT HOLDERBITMBH Two piece 1/4" x 54mm long 10 1 P.O.A 0.010BITMBHL One piece Stainless 1/4" x 75mm long 5 1 P.O.A 0.020
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
CW100‐16SSteel Slimline 100mm x 16mm Bore x 1mm Thick
10 1 P.O.A 0.020
CW100‐16 Steel 100mm x 16mm Bore 10 1 P.O.A 0.046CW125‐22 Steel 125mm x 22mm Bore 10 1 P.O.A 0.085CW230‐22 Steel 230mm x 22mm Bore 10 1 P.O.A 0.284CW350‐25 Steel 350mm x 25mm Bore‐H/S 10 1 P.O.A 0.700CW100‐16M Masonry 100mm x 16mm Bore 10 1 P.O.A 0.450CW230‐22M Masonry 230mm x 22mm Bore 10 1 P.O.A 0.538
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
CWG100‐16Metal Grinding Wheel‐Depressed Centre 100mm x 16mm Bore
10 1 P.O.A 0.120
CWG230‐22Metal Grinding Wheel‐Depressed Centre 230mm x 22mm Bore
10 1 P.O.A 0.600
CUT OFF WHEELS
GRINDING WHEELS
* Denotes lead times and minimum order quantity may apply PAGE 44
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
FPRTOOLTF * Trackfast Tool ‐ 1 P.O.A 3.880FPRBPTF * Trackfast Battery ‐ 1 P.O.A 0.270FPRFUELTF Trackfast Fuel Cell ‐ Long ‐ 1 P.O.A 0.090
FPRTF15 Trackfast 15mm Pins Box 1000 with long fuel cell 5000 1000 P.O.A 1.280FPRTF20 Trackfast 20mm Pins Box 1000 with long fuel cell 5000 1000 P.O.A 1.600FPRTF25 Trackfast 25mm Pins Box 1000 with long fuel cell 5000 1000 P.O.A 1.708FPRTF32 Trackfast 32mm Pins Box 1000 with long fuel cell 5000 1000 P.O.A 1.800
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
FPRTOOLTM * Trackmaster Tool ‐ 1 P.O.A 3.700FPRBPTM * Trackmaster Battery Pack ‐ 1 P.O.A 0.060
FPRTM15 Trakmaster 15mm Pins Box 500 with short fuel cell 10000 500 P.O.A 0.656FPRTM20 Trakmaster 20mm Pins Box 500 with short fuel cell 10000 500 P.O.A 0.690
RAMSET TRAKMASTER™
RAMSET TRAKFAST™
Use the correct Pins for your application
15mm Pins ‐ For fixing track to steel
20mm Pins ‐ For fixing track to concrete
FPRTM20 Trakmaster 20mm Pins Box 500 with short fuel cell 10000 500 P.O.A 0.690
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
FPM2TOOL * M2 Tracker Gas Tool ‐ 1 P.O.A 3.768FPM2BP * M2 Tracker Battery ‐ 1 P.O.A 0.220FPM2BC * M2 Battery Charger ‐ 1 P.O.A ‐FPM2FUEL M2 Tracker Fuel Cells (long type) ‐ 1 P.O.A 0.090
FPM2T16S Tracker pins 16mm STEP DOWN box 1000 with long fuel cell 5000 1000 P.O.A 1.280FPM2T20 Tracker pins 20mm box 1000 with long fuel cell 5000 1000 P.O.A 1.600FPM2T25 Tracker pins 25mm box 1000 with long fuel cell 5000 1000 P.O.A 1.708FPM2T32 Tracker pins 32mm box 1000 with long fuel cell 5000 1000 P.O.A 1.800FPM2T38 Tracker pins 38mm box 1000 with long fuel cell 5000 1000 P.O.A 1.890
MACSIM M2 TRACKER
Use the correct Pins for your application
15mm Pins ‐ For fixing track to steel
20mm Pins ‐ For fixing track to concrete
* Denotes lead times and minimum order quantity may apply PAGE 45
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part LENGTH STOCK SUB PRICE Approx ApproxNo. (mm) PACK PACK EACH $ l/m kg/piece
HEBEL® SLOTTED ANGLESBAS7550‐120‐27 75 x 50 x 1.2mm BMT 2700 200 1 P.O.A P.O.A 3.270BAS5050‐075‐24 50 x 50 x 0.75mm BMT 2400 500 1 P.O.A P.O.A 1.486
HEBEL® TRACK76HDHTHEB Track 50mm x 76mm x 50mm x 0.75mm (for 75mm Hebel Powerpanel) 3000 50 10 21.05 7.02 3.210
HEBEL® TOPHATTHB24‐042‐48 24mm x 0.42 BMT (cyclonic) 4800 200 1 13.26 2.77 1.800THB24‐042‐61 24mm x 0.42 BMT (cyclonic) 6100 200 1 16.82 2.76 2.290THB35‐055‐48 * 35mm x 0.55 BMT 4800 100 5 P.O.A P.O.A 2.892THB35‐055‐60 * 35mm x 0.55 BMT 6000 100 5 P.O.A P.O.A 3.616
HEBEL® ACCESSORIESMETAL SECTIONS for HEBEL®
Part STOCK SUB PRICE ApproxNo. PACK PACK EACH kg/piece
SPBG1040L 10g‐10 x 40 Bugle Hd.Coarse ZP Cl.2 ‐ 1000 P.O.A 3.546SPBG1050L 10g‐10 x 50 Bugle Hd.Coarse ZP Cl.2 ‐ 500 P.O.A 4.320SPBG1065L 10g‐10 x 65 Bugle Hd.Coarse ZP Cl.2 ‐ 500 P.O.A 3.012
SPH1225G * 12g‐11 x 25 Hex Head Gal. Class 3 ‐ 1000 P.O.A 5.630SPH1265G * 12g‐11 x 65 Hex Head Gal. Class 3 ‐ 1000 P.O.A 12.300SPH1465G * 14g‐10 x 65 Hex Head Gal. Class 3 ‐ 1000 P.O.A 14.000SPH14150G * 14g‐10 x 150 Hex Head Gal. Class 3 ‐ 250 P.O.A 7.100
SRCS14100G *14g‐10 x 100 Countersunk Self Embedding Head. Gal. Class 3
‐ 500 P.O.A 9.200
BITHI550Hex Socket Insert Bit 5mm x 50mm (To suit SRCS14100G)
10 1 P.O.A 0.010
SPBT1260 12g‐8 x 60 Button Hd. Coarse ZP Cl.2 ‐ 500 P.O.A 6.900
HEBEL FASTENERS
BAS7550
For other tophat options see pages 19 to 22
BAS5050 76HDHTHEB THB24 THB35
* Denotes lead times and minimum order quantity may apply PAGE 46
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part Thick R Batts m² per PriceNo. (mm) Value Pack Pack $/m²
INGR015‐4 * Glasswool Wall Batts R1.5 75mm x 430 x 1160 75 1.5 16 8.00 P.O.AINGR015‐6 * Glasswool Wall Batts R1.5 75mm x 580 x 1160 75 1.5 16 10.80 P.O.AINGR020‐4 * Glasswool Wall Batts R2.0 90mm x 430 x 1160 90 2.0 22 11.00 P.O.AINGR020‐6 * Glasswool Wall Batts R2.0 90mm x 580 x 1160 90 2.0 18 12.15 P.O.AINGR025‐4 * Glasswool Wall Batts R2.5 95mm x 430 x 1160 95 2.5 14 6.99 P.O.AINGR025‐6 * Glasswool Wall Batts R2.5 95mm x 580 x 1160 95 2.5 14 9.42 P.O.A
Part Thick R Batts m² per PriceNo. (mm) Value Pack Pack $/m²
INGR125‐4 * Glasswool Ceiling Batts R2.5 140mm x 430 x 1160 140 2.5 16 8.00 P.O.AINGR125‐6 * Glasswool Ceiling Batts R2.5 140mm x 580 x 1160 140 2.5 16 10.80 P.O.AINGR130‐4 * Glasswool Ceiling Batts R3.0 165mm x 430 x 1160 165 3.0 16 8.00 P.O.AINGR130‐6 * Glasswool Ceiling Batts R3.0 165mm x 580 x 1160 165 3.0 16 10.80 P.O.AINGR135‐4 * Glasswool Ceiling Batts R3.5 185mm x 430 x 1160 185 3.5 16 8.00 P.O.AINGR135‐6 * Glasswool Ceiling Batts R3.5 185mm x 580 x 1160 185 3.5 10 6.70 P.O.AINGR140‐4 * Glasswool Ceiling Batts R4.0 215mm x 430 x 1160 215 4.0 10 4.98 P.O.AINGR140‐6 * Glasswool Ceiling Batts R4.0 215mm x 580 x 1160 215 4.0 10 6.70 P.O.A
Thermal Wall Batts
GLASSWOOL INSULATION
Thermal Ceiling Batts
Part Thick R Rolls m² per PriceNo. (mm) Value Pack Pack $/m²
INGBF13‐15 * Anticon™ 55 Foil Faced Blanket R1.3 60mm x 1.2 x 15m 60 1.3 1 18.00 P.O.AINGBF13‐20 * Anticon™ 55 Foil Faced Blanket R1.3 60mm x 1.2 x 20m 60 1.3 1 24.00 P.O.AINGBF18‐15 * Anitcon™ 75 Foil Faced Blanket R1.8 80mm x 1.2 x 15m 80 1.8 1 18.00 P.O.AINGBF25‐10 * Anticon™ 110 Foil Faced Blanket R2.5 110mm x 1.2 x 10m 110 2.5 1 12.00 P.O.AINGBF30‐10 * Anticon™ 130 Foil Faced Blanket R3.0 130mm x 1.2 x 10m 130 3.0 1 12.00 P.O.A
Anticon™ Roofing Blanket
Refer to Faststud's Marketing & Pricing Policy for delivery fees on insulation. Pickup is available from Faststud's store. Lead times may apply.
Bradford Anticon™ is a lightweight roofing blanket constructed from a glasswool blanket adhered to an impermeable reinforced reflective foil facing. It is designed as a Thermal insulation specifically for use in residential and commercial buildings.
The thermofoil facing extends 150mm beyond one longitudinal edge of the blanket to provide an overlap when installed.
* Denotes lead times and minimum order quantity may apply PAGE 47
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part Thick R Pieces m² per PriceNo. (mm) Value Pack Pack $/m²
INGRS325 * Bradford™ Supertel™ R0.8 32kg/25mm x 1.2 x 2.4 25 0.8 10 28.8 P.O.AINGRS350 * Bradford™ Supertel™ R1.5 32kg/50mm x 1.2 x 2.4 50 1.5 5 14.4 P.O.AINGRS375 * Bradford™ Supertel™ R2.2 32kg/25mm x 1.2 x 2.4 75 2.2 3 8.64 P.O.A
Bradford Glasswool Supertel™ has been designed as thermal and acoustic internal lining for all air conditioning duct work or may be used for other thermal and acoustic applications where high insulation performance is required at minimal thickness.Supertel™ comes in a range of thicknesses that meet the performance requirements as set out by the Building Code of Australia.A range of other sizes are available upon request.
Part Thick R Batts m² per PriceNo. (mm) Value Pack Pack $/m²
Economy Partition BattsINGP01175 * Economy Partition Batt 11kg 75mm x 600 x 1200 75 1.7 16 11.52 P.O.AINGP01475 * Economy Partition Batt 14kg 75mm x 580 x 1160 75 1.8 16 11.52 P.O.A
Bradford™ Glasswool Partition BattsINGP1150‐4 * Bradford™ Partition Batt 11kg/50mm x 450 x 2700 50 1.1 12 14.60 P.O.AINGP1150‐6 * Bradford™ Partition Batt 11kg/50mm x 600 x 2700 50 1.1 10 16.20 P.O.AINGP1175‐6 * Bradford™ Partition Batt 11kg/75mm x 600 x 2700 75 1.7 8 13.00 P.O.AINGP1110‐6 * Bradford™ Partition Batt 11kg/110mm x 600 x 7500 110 2.5 2 9.00 P.O.AINGP1450‐6 * Bradford™ Partition Batt 14kg/50mm x 600 x 2700 50 1.3 10 16.20 P.O.AINGP1475‐4 * Bradford™ Partition Batt 14kg/75mm x 450 x 2700 75 1.8 10 12.20 P.O.AINGP1475‐6 * Bradford™ Partition Batt 14kg/75mm x 600 x 2700 75 1.8 10 16.20 P.O.ABradford Glasswool Partition Batts are a lightweight insulation product designed for the acoustic insulation of separating walls and office partitions in buildings. Made from up to 80% recycled material, they provide an inexpensive, high performance acoustic treatment for parititions and wall assemblies.
Supertel™
Partition Batts ‐ Acoustic
Part Thick R Pieces m² per PriceNo. (mm) Value Pack Pack $/m²
INGRA25‐4 * Thermoacoustic R2.5 95 x 430 x 1160 95 2.5 14 7.00 P.O.AINGRA25‐6 * Thermoacoustic R2.5 95 x 580 x 1160 95 2.5 14 9.45 P.O.AThermoAcoustic Insulation offers an economical alternative to the R2.5 Soundscreen products and given its thickness is an ideal product for use in external walls.
Part Thick R Pieces m² per PriceNo. (mm) Value Pack Pack $/m²
Wall, Floor and Ceiling Batts with ROCKWOOLINGSS16‐4 * Sound Screen R1.6 60mm x 430 x 1350 60 1.6 6 3.48 P.O.AINGSS16‐6 * Sound Screen R1.6 60mm x 580 x 1350 60 1.6 6 4.70 P.O.AINGSS20‐4 * Sound Screen R2.0 75mm x 430 x 1350 75 2.0 6 3.48 P.O.AINGSS20‐6 * Sound Screen R2.0 75mm x 580 x 1350 75 2.0 6 4.70 P.O.AINGSS25‐4 * Sound Screen R2.5 88mm x 430 x 1350 88 2.5 5 2.90 P.O.AINGSS25‐6 * Sound Screen R2.5 88mm x 580 x 1350 88 2.5 5 3.92 P.O.AINGSS30‐46 * Sound Screen R3.0 120mm x 430 x 580 120 3.0 9 2.24 P.O.A
Thermo Acoustic
SoundScreen™ Plus (Rockwool™)
Bradford SoundScreen™ Plus combines the benefits of thermal insulation with the extra density of Rockwool™, to provide an insulation that reduces noise transfer in the home, as well as keeping it comfortable.
It can be used in external and internal walls, ceilings and mid‐floors to meet energy efficiency regulations.
Refer to Faststud's Marketing & Pricing Policy for delivery fees on insulation. Pickup is available from Faststud's store. Lead times may apply.
* Denotes lead times and minimum order quantity may apply PAGE 48
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part Thick R Batts m² per PriceNo. (mm) Value Pack Pack $/m²
INPR15‐4 * Polymax R1.5 ‐ 90mm x 430 x 1160 90 1.5 16 8 P.O.AINPR15‐6 * Polymax R1.5 ‐ 90mm x 580 x 1160 90 1.5 16 10.8 P.O.AINPR20‐4 * Polymax R2.0 ‐ 120mm x 430 x 1160 120 2.0 12 6 P.O.AINPR20‐6 * Polymax R2.0 ‐ 120mm x 580 x 1160 120 2.0 12 8.1 P.O.AINPR25‐4 * Polymax R2.5 ‐ 140mm x 430 x 1160 140 2.5 8 4 P.O.AINPR25‐6 * Polymax R2.5 ‐ 140mm x 580 x 1160 140 2.5 8 5.4 P.O.AINPR30‐4 * Polymax R3.0 ‐ 180mm x 430 x 1160 180 3.0 8 4 P.O.AINPR30‐6 * Polymax R3.0 ‐ 180mm x 580 x 1160 180 3.0 8 5.4 P.O.AINPR35‐4 * Polymax R3.5 ‐ 200mm x 430 x 1160 200 3.5 8 4 P.O.AINPR35‐6 * Polymax R3.5 ‐ 200mm x 580 x 1160 200 3.5 8 5.4 P.O.AINPR40‐4 * Polymax R4.0 ‐ 220mm x 430 x 1160 220 4.0 6 3 P.O.AINPR40‐6 * Polymax R4.0 ‐ 220mm x 580 x 1160 220 4.0 6 4 P.O.A
Polymax Thermal Batts are designed to suit a wide range of building applications including roofs, walls, and ceilings.
Part Thick R Batts m² per PriceNo. (mm) Value Pack Pack $/m²
INPRA15‐4 * Polymax R1.5 Acoustic ‐ 75mm x 430 x 1160 75 1.5 16 8 P.O.AINPRA15‐6 * Polymax R1.5 Acoustic ‐ 75mm x 580 x 1160 75 1.5 16 10.8 P.O.AINPRA20‐4 * Polymax R2.0 Acoustic ‐ 90mm x 430 x 1160 90 2 16 8 P.O.AINPRA20‐6 * Polymax R2.0 Acoustic ‐ 90mm x 580 x 1160 90 2 16 10.8 P.O.AINPRA25‐4 * Polymax R2.5 Acoustic ‐ 100mm x 430 x 1160 100 2.5 16 8 P.O.A
POLYESTER INSULATION
Acoustic Thermal Batts
Thermal Batts
INPRA25 4 Polymax R2.5 Acoustic 100mm x 430 x 1160 100 2.5 16 8 P.O.AINPRA25‐6 * Polymax R2.5 Acoustic ‐ 100mm x 580 x 1160 100 2.5 16 10.8 P.O.A
Polymax Acoustic Thermal Batts are designed to suit a wide range of building applications including roofs, walls, ceilings, and underfloor.Polymax Acoustic Thermal Batts provide excellent thermal insulation with the added benefit of reduced noise transmission between rooms and floors as well as external noise from traffic and aircraft. Available in 75mm to 100mm thicknesses to suit most stud wall cavities.
Part Thick R Rolls m² per PriceNo. (mm) Value Pack Pack $/m²
INPASB2‐4 * Polymax MSB2 SoundBlanket 50 x 450 x 16.3m 50 0.8 4 29.34 P.O.AINPASB2‐6 * Polymax MSB2 SoundBlanket 50 x 610 x 16.3m 50 0.8 3 29.83 P.O.AINPASB3‐4 * Polymax MSB3 SoundBlanket 65 x 450 x 16.3m 65 1.0 4 29.34 P.O.AINPASB3‐6 * Polymax MSB3 SoundBlanket 65 x 610 x 16.3m 65 1.0 3 29.83 P.O.AINPASB4‐4 * Polymax MSB4 SoundBlanket 75 x 450 x 16.3m 75 1.2 4 29.34 P.O.AINPASB4‐6 * Polymax MSB4 SoundBlanket 75 x 610 x 16.3m 75 1.2 3 29.83 P.O.AINPASB5‐4 * Polymax MSB5 SoundBlanket 85 x 450 x 13.6m 85 1.4 4 24.48 P.O.AINPASB5‐6 * Polymax MSB5 SoundBlanket 85 x 610 x 13.6m 85 1.4 3 24.88 P.O.AINPASB6‐4 * Polymax MSB6 SoundBlanket 100 x 450 x 13.6m 100 1.7 2 12.24 P.O.AINPASB6‐6 * Polymax MSB6 SoundBlanket 100 x 610 x 13.6m 100 1.7 2 16.59 P.O.A
Polyester Sound Blanket
Polymax Sound Blanket is ideal for use in plasterboard partition walls and suspended ceilings.
Sound Blanket provides excellent sound transmission reduction and thermal performance, reducing noise and heat transfer between rooms.
Refer to Faststud's Marketing & Pricing Policy for delivery fees on insulation. Pickup is available from Faststud's store. Lead times may apply.
* Denotes lead times and minimum order quantity may apply PAGE 49
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part Pack Batts m² per PriceNo. Thick mm Pack Pack NRC $/m²
INPACB600 * Polymax Easy Baffle 600 x 1200 (fills 600mm high void) 450 8 5.76 0.90 P.O.A
Part Thick Density Sheets m² per PriceNo. (mm) kg/m³ Pack Pack $/m²Acoustic Absorption Blanket
Ceiling Baffle
Polymax Easy Baffle is designed to reduce room to room sound transfer through suspended ceiling voids. When placed between a concrete slab soffit and the top junction of a plasterboard partition wall, Polymax Easy Baffle can achieve a transmission reduction of 10 ‐ 16 decibels across a range of frequencies and up to 9 decibels in speech range frequencies ‐ the most common nuisance noise in commercial buildings.
No. (mm) kg/m Pack Pack $/mINPAB110 * Polymax Acoustic 10kg / 50mm x 1.2 x 2.4 50 10 6 17.28 P.O.AINPAB200 * Polymax Acoustic 14kg / 25mm x 1.2 x 2.4 25 14 15 43.20 P.O.AINPAB210 * Polymax Acoustic 14kg / 50mm x 1.2 x 2.4 50 14 6 17.28 P.O.AINPAB300 * Polymax Acoustic 20kg / 25mm x 1.2 x 2.4 25 20 15 43.20 P.O.AINPAB310 * Polymax Acoustic 20kg / 50mm x 1.2 x 2.4 50 20 6 17.28 P.O.AINPAB320 * Polymax Acoustic 20kg / 75mm x 1.2 x 2.4 75 20 5 14.40 P.O.AINPAB400 * Polymax Acoustic 25kg / 25mm x 1.2 x 2.4 25 25 15 43.20 P.O.AINPAB410 * Polymax Acoustic 25kg / 50mm x 1.2 x 2.4 50 25 6 17.28 P.O.AINPAB420 * Polymax Acoustic 25kg / 75mm x 1.2 x 2.4 75 25 5 14.40 P.O.AINPAB430 * Polymax Acoustic 25kg / 100mm x 1.2 x 2.4 100 25 4 11.52 P.O.AINPAB500 * Polymax Acoustic 32kg / 13mm x 1.2 x 2.4 13 32 25 72.00 P.O.AINPAB501 * Polymax Acoustic 32kg / 13mm x 0.6 x 2.4 13 32 25 36.00 P.O.AINPAB510 * Polymax Acoustic 32kg / 25mm x 1.2 x 2.4 25 32 15 43.20 P.O.AINPAB511 * Polymax Acoustic 32kg / 25mm x 0.6 x 2.4 25 32 15 21.60 P.O.AINPAB520 * Polymax Acoustic 32kg / 50mm x 1.2 x 2.4 50 32 6 17.28 P.O.AINPAB521 * Polymax Acoustic 32kg / 50mm x 0.6 x 2.4 50 32 6 8.64 P.O.AINPAB530 * Polymax Acoustic 32kg / 75mm x 1.2 x 2.4 75 32 5 14.40 P.O.AINPAB531 * Polymax Acoustic 32kg / 75mm x 0.6 x 2.4 75 32 5 7.20 P.O.AINPAB540 * Polymax Acoustic 32kg / 100mm x 1.2 x 2.4 100 32 4 11.52 P.O.AINPAB541 * Polymax Acoustic 32kg / 100mm x 0.6 x 2.4 100 32 4 5.76 P.O.AINPAB600 * Polymax Acoustic 48kg / 25mm x 1.2 x 2.4 25 48 15 43.20 P.O.AINPAB610 * Polymax Acoustic 48kg / 50mm x 1.2 x 2.4 50 48 6 17.28 P.O.AINPAB620 * Polymax Acoustic 48kg / 75mm x 1.2 x 2.4 75 48 5 14.40 P.O.AINPAB630 * Polymax Acoustic 48kg / 100mm x 1.2 x 2.4 100 48 4 11.52 P.O.A
Polymax Acoustic Absorption Blanket is available in a range of different densities and thicknesses to provide sound absorption across a range offrequencies. A few of the more common variants are shown above. Contact our office for information on other sizes.Standard sheet sizes are 600 x 2400 and 1200 x 2400. Custom sizes can also be made to order.Also available in 100% Black ‐ Minimum order quantities apply.
p
Polymax Easy Baffle is designed to reduce room to room sound transfer through suspended ceiling voids. When placed between a concrete slab soffit and the top junction of a plasterboard partition wall, Polymax Easy Baffle can achieve a transmission reduction of 10 ‐ 16 decibels across a range of frequencies and up to 9 decibels in speech range frequencies ‐ the most common nuisance noise in commercial buildings.
Refer to Faststud's Marketing & Pricing Policy for delivery fees on insulation. Pickup is available from Faststud's store. Lead times may apply.
* Denotes lead times and minimum order quantity may apply PAGE 50
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part Thick R Sheets m² per PriceNo. (mm) Value Pack Pack NRC $/m²
INPABS10 * ABSORB LD 25mm x 1.2 x 2.4 25 0.55 15 43.20 0.60 P.O.AINPABS11 * ABSORB LD 25mm x 0.6 x 2.4 25 0.55 15 21.60 0.60 P.O.AINPABS12 * ABSORB LD 50mm x 1.2 x 2.4 50 1.1 6 17.28 0.75 P.O.AINPABS13 * ABSORB LD 50mm x 0.6 x 2.4 50 1.1 6 8.64 0.75 P.O.AINPABS14 * ABSORB LD 75mm x 1.2 x 2.4 75 1.8 5 14.40 0.80 P.O.AINPABS15 * ABSORB LD 75mm x 0.6 x 2.4 75 1.8 5 7.20 0.80 P.O.AINPABS16 * ABSORB LD 100mm x 1.2 x 2.4 100 2.2 4 11.52 0.85 P.O.AINPABS17 * ABSORB LD 100mm x 0.6 x 2.4 100 2.2 4 5.76 0.85 P.O.A
INPABS20 * ABSORB MD 25mm x 1.2 x 2.4 25 0.6 15 43.20 0.65 P.O.AINPABS21 * ABSORB MD 25mm x 0.6 x 2.4 25 0.6 15 21.60 0.65 P.O.AINPABS22 * ABSORB MD 50mm x 1.2 x 2.4 50 1.2 6 17.28 0.85 P.O.AINPABS23 * ABSORB MD 50mm x 0.6 x 2.4 50 1.2 6 8.64 0.85 P.O.AINPABS24 * ABSORB MD 75mm x 1.2 x 2.4 75 1.9 5 14.40 0.90 P.O.AINPABS25 * ABSORB MD 75mm x 0.6 x 2.4 75 1.9 5 7.20 0.90 P.O.AINPABS26 * ABSORB MD 100mm x 1.2 x 2.4 100 2.5 4 11.52 0.96 P.O.AINPABS27 * ABSORB MD 100mm x 0.6 x 2.4 100 2.5 4 5.76 0.96 P.O.A
INPABS30 * ABSORB HD 25mm x 1.2 x 2.4 25 0.7 15 43.20 0.65 P.O.AINPABS31 * ABSORB HD 25mm x 0.6 x 2.4 25 0.7 15 21.60 0.65 P.O.AINPABS32 * ABSORB HD 50mm x 1.2 x 2.4 50 1.4 6 17.28 0.95 P.O.AINPABS33 * ABSORB HD 50mm x 0.6 x 2.4 50 1.4 6 8.64 0.95 P.O.AINPABS34 * ABSORB HD 75mm x 1.2 x 2.4 75 2.1 5 14.40 1.05 P.O.AINPABS35 * ABSORB HD 75mm x 0.6 x 2.4 75 2.1 5 7.20 1.05 P.O.AINPABS36 * ABSORB HD 100mm x 1.2 x 2.4 100 2.7 4 11.52 1.10 P.O.AINPABS37 * ABSORB HD 100mm x 0.6 x 2.4 100 2.7 4 5.76 1.10 P.O.A
Polymax ABSORB
INPABS37 ABSORB HD 100mm x 0.6 x 2.4 100 2.7 4 5.76 1.10 P.O.A
INPABS40 * ABSORB XHD 25mm x 1.2 x 2.4 25 0.7 15 43.20 0.70 P.O.AINPABS41 * ABSORB XHD 25mm x 0.6 x 2.4 25 0.7 15 21.60 0.70 P.O.AINPABS42 * ABSORB XHD 50mm x 1.2 x 2.4 50 1.5 6 17.28 0.99 P.O.AINPABS43 * ABSORB XHD 50mm x 0.6 x 2.4 50 1.5 6 8.64 0.99 P.O.AINPABS44 * ABSORB XHD 75mm x 1.2 x 2.4 75 2.2 5 14.40 1.10 P.O.AINPABS45 * ABSORB XHD 75mm x 0.6 x 2.4 75 2.2 5 7.20 1.10 P.O.AINPABS46 * ABSORB XHD 100mm x 1.2 x 2.4 100 3 4 11.52 1.10 P.O.AINPABS47 * ABSORB XHD 100mm x 0.6 x 2.4 100 3 4 5.76 1.10 P.O.A
Polymax Absorb is ideal for use behind perforated paneling and ceilings designed to eliminate or reduce echo and increase reverberation times in a single space such as sports halls, cinemas, studios, industrial enclosures, HVAC ducts, silencers or plant rooms. Absorb is also recommended as acavity infill where where low frequency noise seperation through walls and ceilings is required. Absorb can also be used behind decorative wovenfabrics as acoustic panels or baffles to cut reverberation and echo in restaurants and areas where hard surfaces predominate and cause unwantednoise. Absorb can also be laid above suspended ceilings to reduce flanking noise between rooms.Also available in 100% Black ‐ Minimum order quantities apply.
Part Thick R Rolls m² per PriceNo. (mm) Value Pack Pack NRC $/m²
INPAP030‐4 * Polymax Prime 30mm x 450 x 15m 30 0.6 2 13.50 0.55 P.O.AINPAP030‐6 * Polymax Prime 30mm x 610 x 15m 30 0.6 2 18.30 0.55 P.O.AINPAP050‐4 * Polymax Prime 50mm x 450 x 10m 50 1.0 2 9.00 0.65 P.O.AINPAP050‐6 * Polymax Prime 50mm x 610 x 10m 50 1.0 2 12.20 0.65 P.O.AINPAP065‐4 * Polymax Prime 65mm x 450 x 10m 65 1.3 2 9.00 0.68 P.O.AINPAP065‐6 * Polymax Prime 65mm x 610 x 10m 65 1.3 2 12.20 0.68 P.O.AINPAP075‐4 * Polymax Prime 75mm x 450 x 10m 75 1.5 2 9.00 0.72 P.O.AINPAP075‐6 * Polymax Prime 75mm x 610 x 10m 75 1.5 2 12.20 0.72 P.O.AINPAP100‐4 * Polymax Prime 100mm x 450 x 7m 100 2.1 2 6.30 0.78 P.O.AINPAP100‐6 * Polymax Prime 100mm x 610 x 7m 100 2.1 2 8.50 0.78 P.O.A
Polymax Prime is ideal for use in high performance acoustic partition and ceiling systems and gives acoustic performance in such systems to complywith BCA acoustic provisions.Developed to increase the low frequency acoustic characteristics of high performance plasterboard, masonry and aerated concrete composite wallsystems used in apartments and other multi residential and commercial projects.Also available in 100% Black ‐ Minimum order quantities apply.
Polymax PRIME
* Denotes lead times and minimum order quantity may apply PAGE 51
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part Width Length Pack m² per PriceNo. mm m Qty Pack $/m²
INFTA001 * AIRCELL ‐ Aluminium Foil Tape 72mm x 50m Roll 72 50 ‐ ‐ P.O.AINFTA002 * AIRCELL ‐ White Foil Tape 72mm x 50m Roll 72 50 ‐ ‐ P.O.AINFTA010 * AIRCELL ‐ Spacer Biscuits ‐ Bag of 50 ‐ ‐ 50 ‐ P.O.AINFTA020 * AIRCELL ‐ Spacer Biscuits ‐ Box of 400 ‐ ‐ 400 ‐ P.O.AINFTA100 * Retroshield ® Thermo Reflective Insulation 1350 22.25 ‐ 30 P.O.AINFTA101 * Retroshield ® Thermo Reflective Insulation ‐ Handy Pack 1350 5.95 ‐ 8 P.O.AINFTA200 * Glareshield ® Thermo Reflective Insulation with Anti‐Glare 1350 22.25 ‐ 30 P.O.AINFTA201 * Glareshield ® Thermo Reflective Insulation with Anti‐Glare ‐ Handy Pack 1350 5.95 ‐ 8 P.O.AINFTA202 * Glareshield ® Thermo Reflective Insulation with Anti‐Glare ‐ Jumbo Roll 1350 44.5 ‐ 60 P.O.AINFTA203 * Glareshield ® Thermo Reflective Insulation with Anti‐Glare ‐ Wide Roll 1500 20 ‐ 30 P.O.AINFTA300 * Insulaire ® Thermo Reflective with White Surface 1350 22.25 ‐ 30 P.O.AINFTA400 * Insulbreak ® 55 Thermal Break 5.5mm Thick 1350 22.25 ‐ 30 P.O.AINFTA401 * Insulbreak ® 55 Thermal Break 5.5mm Thick ‐ Wide Roll 1500 20 ‐ 30 P.O.AINFTA500 * Insulbreak ® 65 Thermal Break 6.5mm Thick 1350 22.25 ‐ 30 P.O.AINFTA600 * Insulbreak ® 80 Thermal Break 8.0mm Thick 1350 22.25 ‐ 30 P.O.AINFTA700 * Permishield® Breathable Insulation 6.5mm 1350 22.25 ‐ 30 P.O.AINFTA800 * Permishield® Breathable Insulation 8.0mm 1350 22.25 ‐ 30 P.O.AINFTA900 * Permifloor® Water Permeable Underfloor insulation 1350 33.4 ‐ 45 P.O.AMBFS * Bettafix Adjustable Furring Channel Clip with long neck for use with Aircell ‐ ‐ 200 ‐ P.O.AM82 * Non Adjustable Furring Channel clip for use with Aircell ‐ ‐ 250 ‐ P.O.A
AIRCELL
REFLECTIVE INSULATION
MBFS M82
Retroshield® Glareshield®
Insulaire®
Refer to Faststud's Marketing & Pricing Policy for delivery fees on insulation. Pickup is available from Faststud's store. Lead times may apply.
Tilt up concrete panel installation using Retroshield®
* Denotes lead times and minimum order quantity may apply PAGE 52
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
Part Width Length m² per PriceNo. mm m Pack $/m²
SilverSark™ Extra Tough ‐ for Metal / Tile Roof or WallsINFH13560 Sarking ‐ XH Premium Roof & Wall Wrap 1350 x 60 1350 60 81 P.O.AINFH13530 * Sarking ‐ XH Premium Roof & Wall Wrap 1350 x 30 1350 30 40 P.O.AINFH15060 * Sarking ‐ XH Premium Roof & Wall Wrap 1500 x 60 1500 60 90 P.O.AINFH15030 Sarking ‐ XH Premium Roof & Wall Wrap 1500 x 30 1500 30 45 P.O.A
SilverSark™ Extra Tough ‐ Premium Wall WrapINFHB13560 Sarking ‐ XH Breather Premium Wall Wrap 1350 x 60m 1350 60 81 P.O.AINFHB15030 Sarking ‐ XH Breather Premium Wall Wrap 1500 x 30m 1500 30 45 P.O.A
SilverWrap™ Tough ‐ Economy Wall WrapINFM13560 * Sarking ‐ Medium Duty Economy Wall Wrap 1350 x 60m 1350 60 81 P.O.AINFMB13560 Sarking ‐ Medium Duty Economy Wall Wrap Breather 1350 x 60m 1350 60 81 P.O.A
Foil TapeINFT4850 Aluminium Foil Tape 48mm x 50m roll (1/24)^ 48 50 ‐ P.O.A
Sisilation / Sarking
PITCHED TILE ROOF METAL ROOF
SilverSark™Extra Tough R1 5 S mmer
SilverSark™ Extra Tough R1 5 S mmer
SARKING IN STOCK NOW AT GREAT PRICES. GET SOME WITH YOUR NEXT ORDER & SAVE
Silversark™Extra Tough or SilverWrap™ Tough
R1.3
Silversark™ Extra Tough BREATHER or SilverWrap™ Tough
BREATHER R1.0
BRICK VENEER WALL WEATHERBOARDWALL
PITCHED TILE ROOF METAL ROOF
SilverSark™Extra Tough R1.5 SummerR0.9 Winter
SilverSark™ Extra Tough R1.5 SummerR0.9 Winter
Total R values shown apply to typical site conditions and to the range of climatic conditions typical of mainland Australian capital cities. They have been calculated by an independent consulting engineer in accordance with Australia/New Zealand Standard AS/NZS 4859.1
* Denotes lead times and minimum order quantity may apply PAGE 53
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
1300 88 3278(02) 9609 [email protected]
PHONE:FAX:
EMAIL:
* Denotes lead times and minimum order quantity may apply PAGE 54
All Prices Exclude GST. E&OEPricing Effective 1st Aug 2010 R1.1
■ STEEL STUD SYSTEMS, CEILING SYSTEMS AND ACCESSORIES ■
Rev 4.2
The Terms and Conditions set out below (“the Terms”) shall apply to all products and services supplied by FASTSTUD (referred to as FS) to the Customer his employees or agent (referred to as “the Customer”).
FS is not bound by any variation to its Terms unless expressly agreed upon in writing and signed by a duly authorised Representative of FS and the Customer. These Terms herein shall apply notwithstanding any provision to the contrary which may appear on any order form or other document issued by the Customer or any other party. FS may at any time and from time to time alter these Terms. GENERAL 1. No quotation given by FS shall constitute an offer. 2. A Contract is formed when FS has received an order and either sends
the Customer a written acceptance or despatches the goods pursuant to the order.
3. If a Customer cancels or alters any order for products after FS has received the order then FS reserves the right to charge to the Customer the additional costs incurred in cancelling or altering any order or part order together with the costs of any labour and handling to the date of such cancellation or alterations.
PRICES 4. Unless otherwise stated prices quoted are exclusive of GST and other
duties and taxes payable. 5. Prices quoted are firm for thirty (30) days from date of quotation. 6. The Customer shall arrange and bear the cost of any delivery made ex
FS store, including insurance and any other associated costs, unless otherwise agreed by FS.
TERMS OF PAYMENT 7. Unless otherwise stated on the invoice all prices are strictly net. The
granting and continuation of credit to a Customer shall be at the absolute discretion of FS and unless otherwise demanded by FS the Customer shall make payment within thirty (30) days from the end of the month of invoicing.
8. If the Customer fails to make payment in accordance with clause 7, FS shall be entitled to: (a) Require the payment of cash upon delivery of any further products
and services; (b) Charge default interest at a rate equal to prevailing bank overdraft
interest rates applicable to FS on a cumulative basis on all overdue amounts (including late payment charges and amounts other than the price) calculated on a day to day basis on any monies due but unpaid, such interest to be computed from the due date for payment AND the parties agree that such default interest is not a penalty but is a true measure of damages incurred by FS. Payments received from the Customer will be credited first against any default interest and all such charges shall be payable on demand;
(c) Claim from the Customer all costs, commissions, and legal costs and expenses on a full indemnity basis whatsoever arising from the collection of any overdue monies. Such interest, costs and commissions and legal expenses may be recovered as liquidated damages, and
(d) Cease any further deliveries to the Customer and to terminate any agreement in relation to products and services that have not been delivered.
DELIVERY 9. Any date or time quoted for delivery is an estimate only and FS shall
endeavour to effect delivery at the time or times requested by the Customer but failure to do so shall not confer any right of cancellation or refusal of delivery on the Customer or render FS liable for any loss or damages directly or indirectly sustained by the Customer as a result thereof.
10. The Customer shall not be relieved of any obligation to accept or pay for products by reason of any delay in delivery or any strike, lockout, unavailability of raw materials, accidents to machinery, differences with workman, breakdowns, shortages of supplies or labour, fires, floods, storm or tempest, transport delays, acts of God, restriction or interventions imposed by any laws, regulations, governments or agencies thereof and any other cause beyond the control of FS or any other cause whatsoever.
11. FS’s obligation to deliver, if any, shall be discharged on arrival of the products at the Customer’s nominated delivery destination, nominated transport company, nominated agent or the address appearing on the invoice. The Customer shall unload the products upon delivery, provided that if the Customer is unable or unwilling to accept physical delivery of the products when the products are ready for delivery FS shall be entitled to charge a fee for any delay experienced or arrange for the storage of the products at the risk and cost of the Customer including all transportation, storage and other consequential costs.
12. FS may at its discretion make and invoice partial deliveries and each partial delivery shall be a separate sale pursuant to these Terms and Conditions of Sale. FS reserves the right to charge a handling fee for orders less than $100.00 and if less than $500.00 for a reseller or where express freight or special packaging is required.
INSPECTION AND CLAIMS 13. The Customer shall examine the products immediately after delivery
and FS shall not be liable for any claims for misdelivery, shortage, defect unless FS receives details in writing within seven (7) days of the date of delivery of the products and services.
PROPERTY AND RISK 14. Notwithstanding delivery of the products or their installation, property
in any given products shall remain with FS until the Customer has paid and discharged any and all other indebtedness to FS on any account whatsoever (including all applicable sales taxes, GST and other taxes, levies and duties). Any payment made by or on behalf of a Customer which is later voided by the application of any Statutory Provision shall be deemed not to discharge the Customer’s indebtedness and, in such an event, the parties are to be restored to the rights which each respectively would have had if the payment had not been made.
15. The risk in the products shall pass to the Customer upon delivery to the Customer or his agent or to a transport company nominated by the Customer.
16. The Customer acknowledges that it is in possession of the products solely as a bailee for FS until payment as defined in clause 14 has been made in full to FS and until such payment: (i) The Customer shall be fully responsible for any loss or damage to
the products whatsoever and howsoever caused following delivery; and
(ii) The Customer shall store the products separately from its own goods and those of any other party and in a manner which clearly identifies the products whether as separate chattels or as components, as the property of FS.
17. The Customer hereby irrevocably grants to FS, its agents and servants, an unrestricted right and licence, without notice to enter premises occupied by the Customer to identify and remove any of the products the property of FS in accordance with these Terms without in any way being liable to the Customer or any person claiming through the Customer. FS shall have the right to sell or dispose of any such products removed or otherwise in its sole discretion and shall not be liable for any loss occasioned thereby.
18. FS licences the Customer to sell products and sell products manufactured using products of FS. If the products are affixed to other material, the totality thereof shall be the sole and exclusive property of FS until payment as defined in clause 14 has been made in full to FS, unless the other material or part thereof are or is the property of a party or parties other than the Customer in which case the totality thereof shall be deemed to be owned as tenants in common with such other party other than the Customer in shares corresponding to the respective amounts paid or payable by the Customer in respect of such other party or parties.
19. The Customer shall be at liberty to agree to sell the products (independently or affixed to the materials) subject to the condition that until payment has been made in accordance with clause 14, the Customer shall sell as an agent and bailee for FS and the entire proceeds from the sale thereof shall be segregated for the account of FS until FS is paid in full.
20. The right to on-sell, deal or otherwise dispose of FS’s products in the normal course of trade may be revoked at any time and shall automatically cease if a Receiver is appointed over any of the assets or the undertaking of the Customer or if a winding up order is made against the Customer or if the Customer goes into Voluntary Administration or Liquidation (otherwise than for the purpose of reconstruction or amalgamation) or calls a meeting of creditors or makes any arrangements or composition or commits any act of bankruptcy or where the Customer is in default of any of its obligations to FS.
WARRANTY 21. Subject to payment in full being made as defined in clause 14, FS shall as
a non manufacturer use its endeavours to pass on to the Customer the benefit of any warranties or guarantees it receives in respect of products or parts thereof supplied to the Customer provided the products or parts thereof have been installed in accordance with the manufacturers’ recommendations or specifications or relevant Australian Standards. Such warranties or guarantees exclude liability for any special, consequential, direct or indirect loss, damage harm or injury suffered as a result of any product defect to the extent permitted by law and shall be restricted to any one or more of the following: (i) repair the defective goods free of charge or, (ii) replace the defective goods or part of those goods, or (iii) supply equivalent replacement goods, or (iv) credit the Customer such amount as the manufacturer in its sole
discretion considers reasonable having regard to the price paid for the goods and the use of the goods enjoyed by the Customer
LIMITATION OF LIABILITY 22. These Terms do not exclude, restrict or modify the application of any
provisions of any Commonwealth, State or Territorial Law which by law cannot be excluded, restricted or modified.
23. In no circumstances will FS incur any liability in respect of or arising out of or in connection with any special, consequential, direct or indirect loss, damage, harm or injury suffered or incurred by the Customer.
(a) Sale to Non-Consumers (i) In the case of products supplied by FS to a Customer who is not a
“consumer” (as defined in the Trade Practices ACT, 1974 as amended from time (“ the Act”), if the products do not correspond with the description of them on the invoice or are defective, then provided that the products are preserved intact and made available for inspection by a representative of FS and are returned to FS in the same order and condition as that in which they were delivered, FS shall at its option replace those products or reimburse the Customer for the amount of the purchase price paid for them, but any claim in this respect must be made in writing within seven (7) days of the date of delivery of those products.
(ii) Should the Customer seek indemnity from FS in respect of any claim by a consumer on the warranty implied by the Act in a contract for the supply of products by the Customer to that consumer, sub-paragraph (i) will not apply and in respect of products that are of a kind ordinarily acquired for personal, domestic or house hold use or consumption (“consumer goods”), FS liability is limited to indemnifying the Customer in accordance with the Act, limited to a liability to pay to the Customer an amount equal to the cost of replacing the products or the cost of obtaining equivalent products or the cost of having the products repaired, whichever is the lesser amount.
(b) Sales to Consumers In the case of products supplied by FS to a Customer who is a
consumer, to the extent that the products are not consumer products or goods, the liability of FS to the Customer for breach of any warranty or condition (other than a warranty or condition implied by section 69 of the Act ) or for breach of any duty of care shall in all cases be limited, at the option of FS to any one or more of the replacement of the products or the supply of equivalent products, the repair of the products, the payment of the cost of replacing the products or acquiring equivalent products or the payment of the cost of having the product repaired.
(c) Except for those conditions and warranties implied by the Act or other sale of products or consumer protection legislation which may not be excluded, the Customer agrees that :
(i) It has not relied on any inducement, representation or statement made by or on behalf of FS in purchasing the products and there are no implied conditions or warranties herein and no
collateral contracts in connection herewith (except such as may be in writing and signed by a duly authorised representative of FS); and
(ii) This clause sets out the entire liability of FS in respect of its liability under the Act or otherwise in respect of liabilities to the consumer for a breach of a condition or warranty with respect to the sale of products or goods.
24. The applicant, or Customer as the case may be, releases and discharges FS from any claim arising out of or in connection with the installation and/or finishing of the FS product supplied by FS and indemnifies and holds harmless FS in respect of any such claim .
25. Any claim in connection with any act, default or omission (including any breach of contract or breach of duty including, but not limited to, negligence) on the part of FS must be notified to FS in accordance with
Clause 13 otherwise: (a) FS shall not be liable on the claim; and (b) the Customer or applicant, as the case may be, hereby releases and
indemnifies FS in respect of any such claim. 26. The liability of FS in respect of any claim notified under the preceding
clause shall be limited to the cost of the product supplied by FS. 27. These terms do not exclude, restrict or modify the application of any
provision of any Commonwealth, State or Territorial law which, by law, cannot be excluded, restricted or modified.
FORCE MAJEURE 28. FS shall not be liable for any failure or delay to supply or deliver the
products where such failure or delay is wholly or partly due to cause or circumstance whatsoever outside the reasonable control of FS including, but not limited to, war, strikes, lockouts, industrial disputes or unrest, government restrictions or intervention, transport delays, fire, act of God, breakdown of plant, shortage of supplies or labour, storm or tempest, theft, vandalism, riots, civil commotions or accidents of any kind.
TERMINATION 29. If the Customer fails to comply with any of these Terms or being a natural
person or persons commits any act of bankruptcy, or being a corporation passes a resolution for Voluntary Administration or winding up or liquidation (other than for the purposes of reorganisation or reconstruction) or enters into any composition or arrangement with creditors or if a receiver or manager is appointed FS may, in addition to exercising all or any of its rights against the Customer, suspend any further deliveries and immediately recover possession of any products not paid for in accordance with these Terms.
RETURNS 30. Other than in respect of FS’ obligations pursuant to Clause 23 hereof, FS
shall not be liable to accept any returned products but may in its absolute discretion accept the return of products provided that such products shall only be accepted for credit and with the prior written approval of a duly authorised representative of FS Products returned for credit pursuant to this clause must be returned with packing slip and invoice and will be subject to a handling and administration charge equivalent to fifteen percent (15%) of the invoiced value of the returned products. Return freight and other expenses will be paid for by the Customer and no returns of non standard products will be accepted.
SUPPLY 31. FS reserves the right to decline any order for products when the size of the
order or the requested delivery date inhibits or prejudices FS’ ability to fulfil its contractual commitments to its franchisees, licensees or other Customers.
ADVERTISING 32. The Customer shall not advertise in any media the sale or disposal of
products and services purchased from FS, without the written consent of a duly authorised Representative of FS. The Customer shall indemnify and hold indemnified FS against any liability including any special, consequential, direct or indirect loss, damage harm or injury suffered as a result of false, misleading or deceptive advertising and untrue representation or statements made to any person by the Customer in the course of advertising. The Customer further warrants and acknowledges that it will not use any existing logo or brand name of FS or used by FS or that similar to, or attempt to register a trade mark or trade name or that similar to those of FS without the written consent of a duly authorised Representative of FS.
INTELLECTUAL PROPERTY 33. The Customer shall indemnify and hold indemnified FS against any claim,
suit, proceedings or demand made by a third party for loss, damage, suffered whether directly or indirectly by infringement of its intellectual property rights.
CONFIDENTIAL INFORMATION 34. The Customer warrants that it will not disclose to any person confidential
information of FS that the Customer may be shown or comes into contact with in the course of purchasing products and services or from any other source including but not limited FS materials, procedures, tests, reports and equipment, without the written consent of a duly authorised Representative of FS.
PALLETS AND GLUTS 35. Unless otherwise stated, gluts, pallets and containers used to deliver
products to the Customer, will remain the exclusive property of FS and shall be returned to FS at the Customer’s expense within thirty (30) days of the date of delivery. FS reserves the right to invoice the Customer for any glut, pallet or container not returned by the due date.
GOVERNING LAW 36. The Customer agrees that these Terms shall be construed according to the
laws of the State or Territory as FS may in its sole discretion determine. Proceedings may be instituted in such State or Territory as FS may in its sole discretion determine. Failing such determination the Customer consents to any proceedings being instituted and heard by any appropriate Court sitting in the State of New South Wales applying the laws of the State of New South Wales.
ELECTRONIC AND OTHER COMMUNICATIONS 37. (a) The Customer agrees to accept service of notices of Court documents
and notices under the Building and Construction Industry Security of Payment Act 1999 (NSW) via email (in addition to any and all other forms of service authorised under the Act (including Section 31 of the Act), or regulations made pursuant to the Act).
(b) In addition to delivery in person, via post and via facsimile, the Customer agrees to have invoices sent by email.
(c) The Customer agrees that email communications from FS to the Customer constitute an “electronic communication” within the meaning of the Electronic Transactions Act 2000 (NSW).
(d) The Customer agrees that in agreeing to receive invoices by email, and the service of notices of Court documents and notices under the Building and Construction Industry Security of Payments Act 1999 (NSW) via email, the Customer is in both instances designating “an information system for the purpose of receiving electronic communications” within the meaning of the Electronic Transactions Act 2000 (NSW).
(e) The Customer agrees that evidence of the “despatch” (within the meaning of the Electronic Transactions Act 2000 (NSW)) by FS of an email is also prima facie evidence of the “receipt” of the email by the Customer within the meaning of the Act. Unless the contrary is proven the time of receipt will be deemed to be twenty (20) seconds after the time of the “despatch” of the email.
TERMS AND CONDITIONS OF SALE