presentation agenda iko overview polimar systems presented by brian anderson product manager iko...
TRANSCRIPT
Presentation Agenda
• IKO Overview
• Polimar Systems
Presented by Brian Anderson Product ManagerIKO Liquids
IKO Explained
IsraelKoschitzkyOrganisation
• Founded in 1951
• Group HQ in Canada
• 35 Manufacturing Plants
• Exports to over 50 countries
• Employs over 3,000 people
Committed to roofing and waterproofing excellence
Appley Bridge
Chesterfield
Matlock
Aylesham
IKO in the UK
Basement Tanking
Green RoofsReinforced Bituminous Membranes
Mastic Asphalt
Single Ply
Damp Proof Courses
Cold Applied Liquids
Complete Commercial Waterproofing
Damp Proof Membrane
Cavity Trays
Hot Melt
IKO Roofing Specification Division
Rebranding of Specification Teams
• Permanite Engineered Roofing Systems and Marley Waterproofing integrated into one harmonised IKO team
• Restructure effective since January 2010
• Logical next step – internal / market expectation
• Reinforcing IKO’s position as a market leader
• Increasing number of IKO brands being sold by multiple divisions
• Duplication of effort by sales teams, marketing and technical
• Large number of RBM product brands in conflict and chasing same opportunities
• Confusion for customers
• Simplifies the product range whilst combining the strengths of existing brands
• Opportunity to harness strengths of both BUFR sales teams to face increasingly difficult market conditions
Rationale for Change
IKO Roofing Division
The most comprehensive range of flat roofing systems
Dedicated specialists for each product discipline
Mastic Asphalt Cold Applied Liquids
PhotovoltaicsPolymeric Single Ply
Bituminous Membranes
Green Roofing
Monolithic Hot Melt
Polimar Systems
EC/UV system build
EC/UV balcony systems
Polimar WG
Polimar Seal
Polimar Glaze
Polimar CRS
Polimar BWS
Polimar 20 Year System
System Build-up:-
• Polimar GP primer
• Polimar EC embedment coat @ 1lt/m2
• Polimar GRF Reinforcement Fleece 225g/m2
• Polimar EC second coat @ 1lt/m2 ( wet on wet application)
• Polimar UV top coat @ 0.5lt/m2
Balcony application
• Into wet UV coat above fully broadcast using 0.7-1.2mm quartz sand
• Allow to cure and sweep of all loose sand and apply a seal coat of Polimar UV at 0.25lt/m2
Polimar and Asphalt
Applications Using EC/UV:-Applications Using EC/UV:-• Details and Upstands
• Lightweight waterproofing below Asphalt
• BWS to access and stairs
• Associated roof and gutters with difficult access
Polimar 20Year System
Polimar 15 Year System
System Build-up:-
• Polimar GP Primer
• Polimar EC Embedment Coat @ 1.2lt/m2
• Polimar GRF Fleece 100g/m2
• Polimar UV stable top coat @ 0.5lt/m2
Balcony Application
• Into wet UV coat fully broadcast using 0.7-1.2mm quartz sand
• Allow to cure and sweep off all loose aggregate and apply a seal coat of Polimar UV @0.25lt/m2
Polimar 15 Year System
Polimar 10 Year System
Polimar WG is a solvent based formulation containing a unique blend of
flexibilsed acrylic resins and inert pigments, which allow low temperature
applications.
Polimar WG can be used over most substrates including concrete, mastic
asphalt, bitumen felt, asbestos cement sheeting, plastisol coat metal sheeting
System Build-up:-
• Polimar WG embedment coat.
• Polimar GRF reinforcing fleece 100g/m2
• Polimar WG Top Coat
Polimar 10 Year System
Polimar 5 Year System
Polimar Seal is a single component, solvent
based, fibre filled polyacrylic coating.
• Contains a special matrix of dewatering
• polymers and surface wetting agents.
• Specifically designed for a single coat
• application.
• Can be applied in damp and wet
• conditions.
System build-up:-
• Polimar Seal
• New reinforcement available for all areas of movement
Polimar 5 Year System
Polimar Glaze
• Polimar Glaze is a high performance high build elastomeric polyurethane clear coating, designed to give excellent shatter resistance to glass.
• Polimar Glaze has been independently tested by Pilkington Laboratories to BS 6206.
• Outstanding UV stability.
• Excellent Adhesion to glass and plastic roof sheets.
• High impact resistance.
• Erosion and weather resistant
• Can be used in conjunction with the Polimar EC/UV systems to create a decorative balcony finish with coloured quarts aggregate
Cladding Refurbishment System
• Single component moisture triggered PU.
• Single coat application in most cases ( 2 if light on dark)
• Specifically designed for the refurbishment of existing plastic coated metal
sheeting and powder coated aluminum.
• Any BS 4800 or Ral Colour minimum order 20 units 20lt
• Cost effective solution under £4.00/m2
• Brush roller or spray application
• Can be used in conjunction with end lap corrosion treatment using Polimar
EC/UV
• Corus Colorcoat HP 200 approved
• 10 year Guarantee
•Metallic finish now available
Polimar CRS
Polimar CRS
Polimar CRS
Polimar CRS
Balcony Waterproofing System
• Fast cure PMMA resin Balcony system
• Cure times less than 1 hour between coats
• Any colour RAL or BS 4800
• Standard colours:-Light, Medium, Dark Grey, Red and Black.
• Small pack size 5kg
• All two component
• Aluminium oxide aggregate for anti-slip
• Simple roller application
• Applications for balconies, walkways foot bridges and rail platforms
• Small batch size 3 units
• System cost from £28/m2
Polimar BWS
Polimar BWS
Polimar BWS
Polimar BWS
Polimar BWS
Polimar Liquids
Thank for your interest and attention
Any Questions