presentation 1 li pika
TRANSCRIPT
-
8/13/2019 Presentation 1 Li Pika
1/14
Presented byLipika sahu
Roll No-Pc12IST018
BSCIST 2ndyear
-
8/13/2019 Presentation 1 Li Pika
2/14
MODULATIONModulation may be defined as the
process by which somecharacteristics of a signal calledcarrier is varied in accordance with
the instantaneous value of anothersignal called modulatingsignal/baseband signal.
-
8/13/2019 Presentation 1 Li Pika
3/14
Types of modulationAmplitude modulation (AM)
Phase shift keying (PSK)Quadrature amplitude
modulation(QAM)
-
8/13/2019 Presentation 1 Li Pika
4/14
Amplitude Modulation Amplitude modulation may be defined as system in which
maximum amplitude of the carrier wave is madeproportional to the instantaneous value of the modulating
or baseband signal. AM is a modulation technique used in electronic
communication ,most commonly for transmittinginformation via a radio carrier wave.
AM was the earliest modulation method used to transmitvoice by radio .
One disadvantage of AM is that it is inefficient in powerusage. at least two third of the power is concentrated in thecarrier signal.
-
8/13/2019 Presentation 1 Li Pika
5/14
Phase Shift Keying (PSK)
Data is represented by shift in the phase of a signal.
PSK is a digital modulation scheme that conveys databy changing or modulating the phase of a referencesignal(the carrier wave).
-
8/13/2019 Presentation 1 Li Pika
6/14
Quadrature amplitude
modulation(QAM) QAM is both an analog and a digital modulation
scheme.
It conveys two analog massage signals ,or two digitalbit streams by changing(modulating)the amplitudes oftwo carrier waves.
The application of QAM is- it is apply in colour TV.
-
8/13/2019 Presentation 1 Li Pika
7/14
MULTIPLEXING Multiplexing is the set of techniques that allows
the simultaneous transmission of multiple signals
across a single data link.A Multiplexer(MUX) is a device that combines
several signals into a single signal.
A Demultiplexer(DEMUX) is a device that
performs the inverse operation.
-
8/13/2019 Presentation 1 Li Pika
8/14
-
8/13/2019 Presentation 1 Li Pika
9/14
Categories of Multiplexing
-
8/13/2019 Presentation 1 Li Pika
10/14
Frequency Division Multiplexing
(FDM) Frequency division multiplexers can be described as
dividing the circuit horizontally so that many signals cantravel a single communication circuit simultaneously.
The circuit is divided into a series of separate channels,each transmitting on a different frequency.
Frequency division multiplexers are somewhat inflexiblebecause once you determine how many channels arerequired, it may be difficult to add more channels withoutpurchasing an entirely new multiplexer.
-
8/13/2019 Presentation 1 Li Pika
11/14
Wavelength Division Multiplexing Wavelength division multiplexing multiplexes multiple data
streams onto a single fiber optic line
Different wavelength lasers transmit the multiple signals
Each signal carried on the fiber can be transmitted at a different
rate from the other signals
-
8/13/2019 Presentation 1 Li Pika
12/14
Time Division Multiplexing
(TDM) Time division multiplexing shares a circuit among two or more
terminals by having them take turns, dividing the circuit
vertically.
Time on the circuit is allocated even when data are nottransmitted, so that some capacity is wasted when a terminal isidle.
Time division multiplexing is generally more efficient and lessexpensive to maintain than frequency division multiplexing.
-
8/13/2019 Presentation 1 Li Pika
13/14
-
8/13/2019 Presentation 1 Li Pika
14/14