Experts in coating

systems against

corrosion in chemical industry,

oil&gas, water, etc. through

the application of composite

coatings, with advanced reinforced

micro-ceramics and nano-

technology resins

Xtrem-PolymersFlexible Ceramic Coatings

Low permeability.High adhesion,FlexibleResistant to abrasionand impactsNo deslamination,Resistant to thermalcyclesand extrem pHAgainst to biologicalcorrosion

One- coatSolvent freeNot flamableDirecto to steel -no priming-

XtremST

XtremSUB – SEA

XtremCORR

XtremCORR+

Xtrem HT

Xtrem pH

Xtrem pHt

Xtrem MARINE-

KOTE

XtremPRIM10Xtrem

PRIM16

Engineered flexible composite coatings. Ultimate resins with high micro-ceramics and nano particles

technology reinforcement

Products

Xtrem- MARINE KOTE, flexible, one-coat, two components, 100% solids, epoxidicnovolac ceramic filled coating, providing excellet corrosion and abrasion resistance in seawater and marine environments.Optioanally: Special wide spectrum crystallized biocide for bio corrosion protection

Xtrem-ST one coat, two component solvent free epoxy coatingtolerant to poor surface treatement, slightly rusted surfaces, etc.provinding chemical and abrasion resistance to a wide kind ofsubstrates. It can be manufactured for manual (M) or as a sprayableproduct application (S).

Xtrem-SUBSEA two component solvent free epoxy coating , tolerant tomoisture and water during the application, can be applied to differentsubstrates like metal or concrete. It can be provided for manual (M)orsprayable application (S).The fresh coat can cure in wet conditions and even in the water in differenttemperatures.

Xtrem-CORR, two component, solvent free, micro ceramic and nanotechnology filled novalac resin, with outstanding resistance tochemical and crude oil media, against corrosion and abrasion.Application on different substrates, for high temperature services.

Xtrem-CORR+ two component, solvent free, micro ceramic and nanotechnology silanized filled novalac resin, additived with PTFE, for betterlubricity, with outstanding corrosion resistance to chemicals and crude oilmedia, against corrosion and abrasion. Application on different substrates, inhigh service temperatures up to 150ºC.

Xtrem-HT two component, solvent free, micro ceramic and nano technology fillednovalac resin, specially reinforced with glass spheres for outstanding resistance tochemical and crude oil media, against corrosion and abrasion, with certain isolationproperties. Application can be done directly on hot surfaces (service crude oil pipes).

Xtrem-pH Specific highly resistant thin film coating to acids like sulphuric acid 98%,based on a 100 % novolac resin with a amine reacting modified cicloaliphatic curingagent.Specially engineered against chemical corrosion and abrasion for steel tanks,reactors, pipes, etc.

Xtrem-pHT “premium” coating based in a vinyl ester novolac resin,low VOC content, for chemical expositon to high temperatures,resistant to thermal cycles, in highly agressive organic acid or alcalies,solvents, etc. Very low permeability. On metal surfaces.

Xtrem-VC, 2-Layer system (primer and veil coat), high performance modifiednovolac vinyl ester coating for concrete protection , where extreme chemicalresistance and very low permeation is required like highly concentrated acid like85% Phosphoric acid, 37% Hydrochorica acid or alkalies, solvents. etc. even incontinuous inmersion

Xtrem-PRIM10, Xtrem- PRIM16 (concrete primer)Xtrem-PRIM10 Two component solvent free epoxy primer, used for concrete applications, asa primer for a < 6% HR on concrete. Specific use as vapour barrier and from out-sidemoisture. Xtrem-PRIM16 conventional use priming systems on normal concrete surfaces

Xtrem-Polymers

Xtrem SL

Storage tanks

Pipes and equipmentsOff-shore and crude oil industries

Chemical Industry Bio-gas Potable waterWaste water treatment plants

Reactor tanksSecondary containment and basinsGas ducts /scrubbers

ComplementsXtrem-Polymers

Xtrem PASIV

Xtrem ChlorideRemover

Xtrem pHC

Xtrem VC

XtremSiCs/m

Cleaning solution, de-rusting and phosphatingsolution for metalic surfaces structures.

Ultimate formula, highly concentratedDesaltering/dechlorating solution/foam formetalic surfaces

High built two-components special composite, highlyreinforced with SiC (silicium carbide) and nano-particles against high abrasion on different substrates.Two version available: sprayable/roller or spatula.

Xtrem-pH C Highly chemical resistant and wear resistant, low viscosity,thin film 100% novolac epoxy for aggressive media for concreteprotection, i.e. Sulphuirc acid 98%, Sodium Hydroxide 50%, etc. even incontinuos inmersion. No priming is needed on regular and cohesiivedconcrete.

Xtrem-SL100% solids, advanced reinforced ceramic thin film coating to protectmetal structures and equipment in extreme immersion services likeslurries, mineral processing, etc .for piping and floating cells. Improvethe flow of the materials.. Low friction coating

ww.Xtrem-Polymers.comby BV-Corrosion Consulting, S.L.

Distributed and applied by:

GARAY RECUBRIMIENTOS SLPol Ind El Campillo II, parcela P 11.148500 ABANTO Y ZIÉRBENASpain

Xtrem-PolymersProduct line

Xtre

mKO

TE

MAR

INE

Xtre

mSU

B SE

A

Xtre

mST

S/M

Xtre

mCO

RR

Xtre

mCO

RR+

Xtre

mHT X

trem

pH Xtr

empH

t

Xtre

mSL Xt

rem

pH C

Xtre

mVC Xt

rem

PRIM

10/1

6

External lining - - - - - - -Inside lining -

Substrate: steel DumpedsurfacesSlightlyRusted

surfaces - - -

Substrate: concrete, cements, etc * * * * * * - - * Concrete priming systemsApplication methods

Off-shore, seawater, marine envir. - - - -Light chemicals Chemicals, solvents (consult us) - - - - - Moderate abrasion Severe abrasion - - - - - - - - - -Solids on compound 100 % 100 % 100 % 100 % 100 % 100 % 100 % 93 % 100 % 100 % 93 % 100 %

Temperature resistance- immersion-

80 °C 80 °C 100º C 130 °C 130 °C 140 °C 60 °C 135 °C 65 °C 40 °C 130 °C 60 ºC

Temperature resistance- dry-

90 °C 90 °C 120 °C 150 °C 150 °C 170 °C 150 °C 180 °C 120 °C 80 °C 200 °C 80ºC

Adhesion (*bonding strength)> 34

N/mm2> 27

N/mm237

N/mm2> 27

N/mm2> 41

N/mm2> 27

N/mm2> 32

N/mm2> 16

N/mm2> 23

N/mm2> 21

N/mm2*3,8

N/mm2*30

N/mm2

Abrasion resistance(ASTM D4060) 58 mg 80 mg 53 mg 80 mg 48 mg 80 mg N/A N/A 26 mg* N/A N/A N/A

Optional: Anti-static properties - - - - - - - - - - -

Cathodic disbonding test - - - - - - - - -Optional: protección against SRB biological corrosión - - - - - - - - - -ISO 20340 Metal constructions and structures in Off-shore - - - - - - - - -Optional: BAW approval Im 1 - for fresh and inland water - - - - - - - - - - -

ISO 12944-2, Categories C5-M and IM1-3 , > 15 years - - - - - - - - -

Salt spray test DIN EN ISO 9227:2006-10 10.000 h 10.000 h

- 10.000 h - - - - - - - -

Autoclave test with explosive decompressions (natural gas, 100 bar, 100 °C)

- - - - - - - - - - -

Thermo-Shock Test(30 min. 180 °C + 30 min. 0 °C - 1000 cycles)

- - - - - - - - - - -

Diluted acids - - - Concentrated acids, solvents, etc. - - - - -

Manufactured in Germany (EUROPE) certified ISO 9001-2015 factories

The information provided in the brochure is for information only and has no contractual validity.We are not responsible for typographical errors, out-of-date data, erroneous images, or anyother circumstance that affects the validity or accuracy of the contents which includes.

Número de diapositiva 1Número de diapositiva 2Xtrem-Polymers_interior_ENG - ENCOUNTER.pdfNúmero de diapositiva 1