premier suppliers of tactical military and security ... · includes black, polyester pouch clear...

PREMIER SUPPLIERS OF TACTICAL MILITARY AND SECURITY PRODUCTS SINCE 1989

Military Products based in South Africa is a registered supplier of tactical military and security products to the SA Defence Force, Air Force Police Force (SAPS) Armscor. The company has Security Clearance to deal in classified military/security goods and products. Military Products was established in 1989 in Cape Town South Africa. The company provides tactical military and security products. All items are supplied to the End User’s/client’s specifications. The following catalogue is indicative of what the company has supplied, however not limited to the following items and supply according to End User’s requirements. The company works close in hand with JV partners including well-known armament brands and military vehicles (land, air and sea).

The company product offering is not limited to the military sector and has been extended to the oil and gas industry. Supply of specialised safety gloves and coveralls that meet and conform to acceptable international standards AS2161.2

The company has and continues to supply governments and private security firms in Southern Africa, West Africa, Central Africa, East Africa, UAE and the Middle East. We specialise in supplying national defence units and private security both locally within South Africa and Africa as well as overseas. All products have MOQs (minimum order quantity). Products are supplied according to client’s specifications and manufactured to Mil-Spec. where required.

WE PRIDE OURSELVES ON:

* Delivering products to client’s specifications of highest standards. * Executing delivery timeously and professionally. * Delivering of the most competitively priced products.

INDEX PAGE (PLACE CURSOR OVER ITEM OF INTEREST AND ENTER)

COMBAT UNIFORMS/CLOTHING

TACTICAL COMBAT UNIFORM SETS - UNDER SHIRTS/PANTS

TACTICAL UNIFORMS – PRIVATE SECURITY PROTECTION

HEADWEAR

TACTICAL JUMP SUIT

PILOT COVERALL

TACTICAL RAIN WEAR/WINDPROOF JACKETS

GLOVES

FOOTWEAR

BELTS/ELBOW AND KNEE PROTECTION

TACTICAL EYEWEAR

BACKPACKS

MILITARY BAGS/ KIT BAGS

HYDRATION BACKPACK

TENTS

SLEEPING BAGS/CAMP COTS/STRETCHERS

OPERATIONAL COMBAT MEDICAL BAGS AND CORPSE RECOVERY BAGS

MRE PACKS (MEAL READY TO EAT)

WATER BOTTLES & CANTEEN SETS

HOLSTERS/MAG POUCHES/SHOT SHELL CARRIERS

RIFLE SLINGS AND PISTOL LANYARD

BALLISTIC // BULLET PROOF// STAB PROOF VESTS//BULLET PROOF HELMETS

ASSAULT VESTS

RIOT GEAR

RIOT HELMETS

RIOT SHIELDS

GAS MASKS

BATONS

HANDCUFFS AND RESTRAINTS

EOD – BOMB DISPOSAL SUIT

NIGHT VISION, AIMING DEVICES AND DAY OPTICS

SECURITY SCANNERS

COMBAT UNIFORMS/CLOTHING

BDU/ ACU/M65 JACKETS/UNIFORMS SPECIFICATIONS

Material 65/35 Polycotton rip stop

200-250gsm

Jacket: Turn down collar, 4-6 pockets, pouches, zipper or

button on front for closing.

Pants: combat type 4 pocket with two side seam pockets.

Waist band with belt loops and draw string ankles.

Available in all camouflage and plain colours.

TACTICAL COMBAT UNIFORM SETS - UNDER SHIRTS/PANTS

Under armour shirts.

Typically worn under combat jackets.

Poly cotton sleeves 200 gsm with Velcro patch and

pouch on arm

Torso “wick away” moisture management for

breathability.

Fold collar

Available in all colours/camouflage

Pants have inserts for knee pads

TACTICAL UNIFORMS – PRIVATE SECURITY PROTECTION

TSLS01 TSSSO1

TP01 TPO2

Poly cotton rip stop fabric is highly breathable yet ultra- durable

Teflon coating resists stains, maintaining a neat, professional look

65% polyester/35% cotton rip stop

Patented hidden-document pockets

Bi-swing shoulders for easy movement

Reinforced elbows

Dual pen pockets on left forearm

Treated for stain & soil resistance

Colours: Khaki, Olive green, Black, Navy Blue or to spec.

HEADWEAR

BOONIE TACTICAL CAP

BEANIE TACTICAL BALACLAVA

Constructed from durable 50/50 Cordura nylon cotton rip stop

Meets US Military specs

Brass screen vents

Adjustable chin strap

All camouflage and plain

Rip stop

Mechanical stretch

Moisture-wicking, quick-dry

Anti-microbial

UPF 50+ protection

All colours camouflage

Premium 100% acrylic knit beanies/watch caps embroidered directly on the cuff

Anti-piling caps provide comfort, warmth and shape retention, as well as instant identification

One size fits all

All colours

Constructed from a lightweight 6.6 oz. 100% polyester/spandex grid plaited jersey knit that stretches

Flat locked construction

Treated with Microban for anti-microbial and anti-order defense

Available in fire retardant Nomex®

BERET DRESS CAP

BDU CAP PETTY CAP

Made from 100% composite wool.

Black cotton lining inner, black textile

nylon headband with fabric tape for

adjustment to head size

All colours

To clients’ specifications

Made from 50% wool 50% polyester.

Black cotton lining inner, black textile

nylon headband

Braid as per client

Reinforce peak

Designed to clients’ specifications

Rip stop

Mechanical stretch


Anti-microbial

UPF 50+ protection

All colours camouflage


Reinforced poly-cotton


Anti-microbial

UPF 50+ protection

All colours and camouflage


TACTICAL JUMP SUIT

Tactical Utility Jumpsuit features:

6 oz, 65% polyester, 35% cotton twill construction

Double-needle lap-seam construction on all major seams for superior durability

Reinforced knee patches for additional durability

UV 40+ defense keeps fabric from fading

Heavy-duty two-way front brass zipper with welt cover to prevent snagging

Two zippered chest pockets with pen/penlight slot on left pocket

Two-position snap closure at wrists for exact fit

Two zippered rear hip pockets

Two concealed side-seam pockets with bypass

Two diagonal-zippered cargo pockets on thigh

Diagonal-zippered calf pocket on lower right leg

Elasticized waistband with large belt loops that securely hold a heavy-duty belt

Machine washable

All colours available

PILOT COVERALL

Features NOMEX, a flame-resistant, non-melting material (92% meta aramid/5% para aramid/3% conductive fibers)

Sewn to military specifications FNS/PD 96-17 (MIL-C-83141A)

Felled seams throughout for enhanced durability

Six primary pockets with additional accessory pockets

Reinforced shoulders to prevent wear

Two-way zipper front with cloth pull

Bi-swing back improves range of motion

All colours

Manufactured to all specs.

TACTICAL RAIN WEAR/WINDPROOF JACKETS

REVERSABLE RAIN JACKET

MILITARY PONCHO

100% nylon shell

Waterproof and breathable laminate

Sealed seams to keep you dry

100% polyester lining

Zip front with snap closures

Removable liner black fleece liner

6 pockets: 2 chest, 2 hand warmer and 2 inside chest pockets

Adjustable cuffs

3M™ Scotchlite™ reflective tape

Built-in hood with snap closure

Mic loops, badge tab and side zips

All colours

100% nylon shell




All colours

RAIN SUIT

100% nylon shell or Gortex ®




Jacket four pocket type with sealed seams

Pants side seam access pockets elasticated waist and leg cuffs

All colours

GLOVES

FULL FINGER TACTICAL GLOVES: LEATHER/KEVLAR/NOMEX

FTG01 FTG02 TG01

CUT RESISTANT/NEEDLE RESISTANT PATROL GLOVES

CR01 CR02 CRN01

DRESS LEATHER GLOVES – ANY COLOUR LINED OR UNLINED

Leather/Amara combination

Spandex

Reinforced TPE protector with tactical

joints

Long or short fingered

All colours

Leather/Amara combination

Kevlar® lined

Spandex combo upper

Cut and needle resistant

All colours

NOMEX TACTICAL AND PILOT GLOVES

CATEGORY: SOUTH AFRICAN: MILITARY, POLICE AND AIR FORCE GLOVES

MULTI-PURPOSE GLOVES

Leather (Nappa or to spec.)

Unlined or lined

All colours

Constructed with flash-resistant fabric back

Nomex®/DuPont™ KEVLAR® blend construction

Durable, yet soft premium leather goatskin palm

Gauntlet design for forearm protection

Engineered to U.S. military specifications

Sewn entirely with Nomex® thread

SANDF SPEC: 05181-100-040

Green knitted gloves with black pvc dots

SANDF Spec SALM 05181-100-041.

Navy blue knitted gloves

SAPS Spec 2750/2011.

SP Guard cotton gloves

SA AIRFORCE Spec SALM 173.

National Ceremonial Guard gloves (NCG)

SANDF/AIRFORCE Spec: 05741-100-018

Load master leather gloves long cuff length

SA AIRFORCE TYPE B FIG 4 (SABS 1297)

Men’s uniform gloves brown leather unlined gloves (available in all colours)

SANDF Spec: SALM 05741-100-198/SAPS 319

Women’s uniform brown leather unlined gloves (available in all colours)

SANDF Spec: SALM 05741-100-198 / SAPS 319

Cream leather unlined gloves SAMHS (SA Military Health Services)

Women’s uniform gloves.

Spec: SALM 05741-100-198

Cream leather unlined gloves SAMHS (SA Military Health Services)

Men’s uniform gloves.

Spec: SALM 05741-100-198

White leather unlined gloves men


White leather unlined gloves women


Black leather fleecy lined gloves – unisex


AFV Nomex Pilot gloves

SA Airforce, SAPS Airwing and SANDF

Spec: 05181-100-087 – NOMEX/LEATHER/AMARA

WORK IMPACT GLOVES KEVLAR/AMARA/PU

USE IN OIL AND GAS INDUSTRY

GLOVES CAN BE CUSTOMISED WITH COMPANY LOGO AND COLOURS

Conforms to AS 2161.2 Standards

EN374 – Wet work – oil and chemical resistant

EN388 – Mechanical work – cut, abrasion and impact resistant

EN407 – Heat resistant

FOOTWEAR

COMBAT BOOT

DRESS FOOTWEAR

OFFICE FOOTWEAR GEORGE BOOT DRILL BOOT

Outer Shell leather/cordura

Gore-Tex® as option

Waterproof and breathable

OrthoLite® sock liner

Ankle protection and support

Optional side zipper

Trail stability

Added toe cap for protection

Speed lace upper

Light weight

Leather upper (patent or matt)

Leather soles or PU/rubber soles

Hi-Gloss upper is easy to clean and never needs to be polished

Lining absorbs perspiration and resists odors and mildew

Shock-absorbing EVA outsole provides extra comfort and important heel cushion

Velours and polyurethane foam padded insole

BELTS/ELBOW AND KNEE PROTECTION

TB01 TB02 TB03

TB04 TB05 TB06

TBS001 TBS002 CX01

All belts made to order

Stable belts/Uniform belts

Tactical belts

Quick release buckles

Nylon

100% ballistic nylon or webbing

Fade and scratch resistant

Lined options

Knee and elbow pads

Material: PE+EVA

Flexible design or Rigid design

Tactical buckles

Internal foam

Supplied as inserts for Tactical pants Any colour

TACTICAL EYEWEAR

TEW01 TEW02

TEW03 TEW04

Clear polycarbonate lenses, extra lenses supplied

Meets ANSI Z87.1-1989 standards and MIL-STD-662E V50

1-1/4"W adjustable strap

Anti-fog inner lens, scratch-resistant outer lens

Filtered vents

Black/tan frame with foam padding for comfort and stability

Goggles fits over most prescription glasses

Includes black, polyester pouch

Clear polycarbonate lens

Meets ANSI Z87.1-1989 standards and MIL-STD-662E V50

1-1/4"W adjustable strap

Anti-fog inner lens, scratch-resistant outer lens

Filtered vents

Black/tan frame with foam padding for comfort and stability

Dust resistant

Includes black, polyester pouch

Meets and exceeds ANSI Z87.1 impact Standards

Resists penetration from high speed objects

100% optically correct polycarbonate lenses

Comfort fit TPR nosepieces

Brow contact relief guard

Ultra-light frame design provides memory flex comfort and added durability

Blocks 99.9% of harmful UVA and UVB rays

BACKPACKS – MANUFACTURED TO SPECIFICATION

TB01

TB02

TB03

600 Oxford waterproof

Multi pouch

Multi compartment

1 – 3 day assault pack

All colours/camouflage


Multi pouch

Multi compartment

Bergen 7-10 day pack



Multi pouch

Multi compartment

Bergen 7-10 day pack


MILITARY BAGS/ KIT BAGS

KB01

KB02

KB03


Multi pouch/molle system

3 compartment

30-50ltr pack

Handles and straps/backpack



Multi pouch

9 compartment

30-50ltr pack

Handles and straps/backpack



1 compartment

30-50ltr pack

Handles and straps


HYDRATION BACKPACK

HP01

HP02

HP03


Multi compartment

1 Day pack storage

Molle system

3Ltr hydration bladder with one

way valve system



Multi compartment

3 Day pack storage

Molle system

3-5ltr hydration bladder with one

way valve system



Side compartment

3ltr hydration bladder with one

way valve system


TENTS

COMMAND/MESS TENT

SINGLE MAN TENT

All tents manufactured and supplied to customer specifications

100% Cotton canvas

500g/sqm waterproof

Mould proof

Anti- corrosive

All sizes

Signal jamming

Brown, Olive or camouflage

100% Cotton canvas

500g/sqm waterproof

Mould proof

Anti- corrosive

All sizes

Snap sheets

Brown, Olive or camouflage

SLEEPING BAGS/CAMP COTS/STRETCHERS

CC01 – CAMP COTS FOLD OUT

ROLL MATRESSES

SLPB01 – SLEEPING BAGS

200x70x45cm

600D oxford

Aluminium frame

Frame thickness 0.9mm-1.2mm

Fold away to carry bag

Can be customised

200x70x45cm

High density memory foam

Available in self- inflating and

deflating units

Light weight

225x85x50cm

Poly 190T PA shell

Poly 190T lining

Spray bonded cotton

Weight 2kg with bag

Side or centre zipper


OPERATIONAL COMBAT MEDICAL BAGS AND CORPSE RECOVERY BAGS FMK001

KMK002

BB01

Medic pack – individual trooper

240x200x50mm

Molle medical pouch, single man

Contents supplied to specification

Medic pack – full emergency pack

Multi compartment

Multi treatment in field

Contents supplied to specification

Body recovery bags

Confirm to OSHA 3130 standards

Available in materials PEVA, LDPE, PVC

Chlorine free

Can be incinerated

Supplied to specification

MRE PACKS (MEAL READY TO EAT)

XMREs are all freshly packed with 2100 – 2500 calories of US. Military grade components.

HALAL/Kosher/Vegetarian: Type Certified: No pork or Pork By-products available.

Can be designed for African Diet

Extended Shelf Life: 3 years or more depending on storage temperature and conditions from date of pack

3-6 different menus available if no special dietary requirements needed ( Customer choice at the time of order)

All the contents are fully cooked and does not require water.

Everything can be eaten out of the pouch and packets anytime, anywhere (hot or cold).

Flexible foil Packaging

Lightweight

Water proof

Dust proof packaging

Tamper proof

Available in 12hr and 24hr meal packs

WATER BOTTLES & CANTEEN SETS

Supplied to specification

MK01

MK02

WB01

WB02

Full canteen set PU/Aluminium

2ltr bottle

Utensils

Heat resistant cooking receiver

2 containers

All units inter connect and stored as

one unit in pouch

Aluminium bottle and canteen

1ltr bottle


2 containers


one unit in pouch

Plastic bottle and aluminium canteen

1ltr bottle



one unit in pouch

Plastic bottle

3ltr bottle

Stored as one unit in pouch

Strap and belt loop

HOLSTERS/MAG POUCHES/SHOT SHELL CARRIERS

#CY-NY-BHM-001 - Holster

#CY-G19 - Holster

#CY-MP-G3 – Mag holder

#CY-GRG – Grip glove

#CY-MG-G01 – Mag well

High quality 900D Nylon holster, Suitable for Bersa, Beretta, Glock,

Ruger, Taurus, Smith and Wesson, Walther and many more.

Entire barrel covered, open muzzle design

Spare magazine pouch with adjustable flap on front of holster

Fits belt widths up to 2" (53 mm)

Adjustable Thumb Break and easily clips onto a belt

Designed for comfort and quick draw

Holster for Glock 17 19 22 23 31 32 34 35 pistols Made by high quality polymer material; Paddle part with more soft silicon material to touch the body; Rotates 360°for every applications; Lock system, press release Interchangeable with belt loop and leg rig system. Magazine pouch

Magazine Pouch - polymer Interchangeable with Paddle, Belt or leg rig system Allows for secure storage of magazines and quick access Glock17 19 22 23 31 32 34 35 etc. magazine.

Slip-On Grip Glove fits for Glock 17 19 20 21 22 23 31 34 35 37. Made from ultra-soft, ultra-stretchy rubber material It helps absorb recoils Its ventilated designing keeps hand comfortable and dry Ideal for Concealed Carry It fits Glock compact pistol series

Black Polymer innovative Mag Well helps you fast smooth reloading your mag without fumbling around; The Following GLOCK Models: 17, 17L, 22, 24, 31, 34, 35, and 37. Full-sized 9mm, .40, .45 GAP, and .357 Sig Gen 1, 2 or 3 Glock

#CY-GA-G01 - Grip

#CY-1911 - Holster

#CY-T92 - Holster

#CY-MP-P2 – Mag holder

#CY-T24/7 - Holster

#CY-T800 - Holster

Changes the grip angle. Provides better control during rapid firing Utilizes an enhanced grip tang which provides leverage for, and protection to the firing hand Beaver Tail fits for Gen 1 2 3 Glock 17 19 22 23 24 31 32 34 35 37 38

Holster for 1911 Variants pistol; Made by high quality polymer material; Paddle part with more soft silicon material to touch the body; Rotates 360°for every applications; Press button lock system for quick release Interchangeable with belt loop and leg rig system.

Holster for Taurus PT92 pistol; Made by high quality polymer material; Paddle part with more soft silicon material to touch the body; Rotates 360°for every applications; Press button lock system for quick release Interchangeable with belt loop and leg rig system.

Magazine pouch for Taurus PT92, PT809, PT605 pistol; Made by high quality polymer material; Paddle part with more soft silicon material to touch the body; Rotates 360°for every applications; Press button lock system for quick release Interchangeable with belt loop and leg rig system.

Holster for Taurus 24/7 & 24/7-OSS pistol; Made by high quality polymer material; Paddle part with more soft silicon material to touch the body; Rotates 360°for every applications; Press button lock system for quick release Interchangeable with belt loop and leg rig system.

Holster for Taurus PT809/PT840/PT845, 24/7, 24/7pro, 24/7 G1 pistol; Made by high quality polymer material; Paddle part with more soft silicon material to touch the body; Rotates 360°for every applications; Press button lock system for quick release Interchangeable with belt loop and leg rig system.

#CY-MP – Mag holder

#CY-DLP – Drop leg platform

#CY-BC – Belt loop system

#CY-SC-M – Shot shell carrier

#CY-GL01

Holsters and Mag holders can be made to specification

Magazine pouch for Taurus 24/7, Beretta Px4; H&K P30; H&K USP Compact (9/40); Ruger SR9; Steyr M Series; S&W Sigma; Taurus 24/7, PT845, PT840 pistol Made by high quality polymer material; Paddle part with more soft silicon material to touch the body; Rotates 360°for every applications; Press button lock system for quick release Interchangeable with belt loop and leg rig system.

Drop leg platform offers versatility of a modular platform which compatible with all holsters and magazine pouches. High-tech, black polymer main attachment panel Fully adjustable straps with side release buckles Easily attach holsters, mag pouches.

Belt Clip Compatible with all Holsters and Mag. Holders Easy interchangeability with “alan key system” Adjustable for most military/police belt widths

The durable, corrosion resistant polymer shell holder is attached to a rugged, aluminium backing plate that installs directly on the shotgun receiver. Allows for 6 extra rounds for accessible fast reloading. All mounting screws are included, no gun smithing required. Installation is easy, and in most cases requires no alterations to the shotgun.

Combo trigger lock and key lock Designed to lock your trigger mechanism for added security and protection. You can set your own digit combination for security and convenience. Handguns ,rifles and shotguns. .

RIFLE SLINGS AND PISTOL LANYARD

TRS01 (1 point) TRS02 (2 point) TRS03 (3 point)

TPL01 PISTOL LANYARD EXTENDABLE

Rifle slings:

I point, 2 point and 3 point, High strength nylon weave, Rot/mould proof

High tensile clips and buckles, “Bungee cord” for rapid deployment of weapon

Available in black, olive and tan

Pistol lanyard/retention cord:

High strength nylon weave, Rot/mould proof

Extendable cable coated in plastic/rubber

High tensile clips and buckles

Secures handgun from theft and allows shooter maximum control of weapon

Available in black, olive and tan

BALLISTIC // BULLET PROOF// STAB PROOF VESTS//BULLET PROOF HELMETS

BPVTV01 BPVCV01 PBVNV01 BPVTV02

Cordura 600D outer material waterproof

With or without Molle systems

Inner ballistic panels either Kevlar or Aramid Gold Flex.

Each with extra pouches front and back for extra plate insertion.

NIJ 010.06

NIJIIIA and NIJIVA ICW

Manufactured to specification with ballistic reports.

Available in Maritime options.


Strike plates 2-2.2kg, Level NIJIVA ($45-70/plate)

PASGT helmet NIJIIA Kevlar/Aramid ($110-164)

FAST helmet NIJIIIA with rails fitted for attachment of communications and night vision

Manufactured to specification with ballistic reports.

Available in Maritime options


ASSAULT VESTS

TCV01 TCV02 TCV03

TCV04 TCV05 TCV06

Material cordura 600D

Mesh material for breathability

Quick release buckles

Molle system

Utility pouches supplied to client’s spec.


Material cordura 600D

Mesh material for breathability

Quick release buckles, Molle system

Utility pouches supplied to client’s spec.


CAN BE SUPPLIED AS NIJIIIA and NIJIVA

RIOT GEAR

RIOT SUITS

All suits supplied to specification

Impact, abrasion, stab and flame resistant

All suits supplied with test reports

Suits supplied with carry bags

Goggles and helmet is extra

Logos can be applied at factory level

SUITS CAN BE SUPPLIED IN COMPONENT FORM –

ARM, LEG, CHEST

RIOT HELMETS

RH01 RH02

RIOT SHIELDS

RS01 -Ballistic RS02 (SHOCK) RS03

Two basic helmets available

Face guard with metal grill

Face guard without metal grill

Impact, abrasion and flame resistant

Adjustable with quick release buckle system

Neck protectors

Logos can be applied at factory level

Polycarbonate

Ballistic options

Interlocking system

Shock shields

Logos applied at factory level

Manufactured to specification

GAS MASKS

GM01 GM03

BATONS

TB01 EB01 SB01

Full vision

CBRN standards

Gas filters protection level A2B2E1-P3

All masks supplied to specification with

test reports

Tonfa baton

ABS+PC

60cm length

With holder

Extendable baton

Coated 4140 steel

560mm open length

220mm closed

Stun baton

7.2V

˂1.9A con for shock

˂0.8A con for light

HANDCUFFS AND RESTRAINTS

HCHR01 HCH01 HRCL01

Hinge type cuff mould centre Hinge type cuff with pouch Chain link cuff with pouch

LRC01 LHR01 NRC01

Leg restraints Leg and hand restraints Nylon cuffs/restraints

All hand cuffs manufactured from the carbon steel, stainless steel is available on request.

Handcuff average weight 300g

Supplied with pouch in leather or cordura

Link or hinge options

All restraints manufactured from the carbon steel, stainless steel is available on request.

Average weight 300 - 400g

Nylon restraints in black and white.

EOD – BOMB DISPOSAL SUIT

General Description

Subassembly

Full protection EOD helmet, Adjustable transparent visor

Ventilating system

Communication system (optional)

Illuminating system (optional)

Protection suit: Jacket and Trousers, Chest and groin enhanced plates

Spine protection device, Groin protection short trousers

Quick-release device, Hands & feet protection, knee pad

Trousers widened article

EOD boots (optional)

Cooling jacket (optional)

Weight Total weight 35kg, Protection suit 25.5kg (with enhanced plates)

EOD helmet 3.5kg, Accessories 6kg

V50

Helmet ≥720m/s ; Visor ≥850m/s

Transparent window≥750m/s ; Surface ≥600m/s

Plates ≥1600m/s

(Higher level of protcetection can be customized)

Against Shock

Wave Performance

Tested with Hybrid dummy many times, shows ultra-strong

performance

Color Dark blue, camouflage (customization as requirement)

Testing Institution German Beschussamt Mellrichstad laboratory

NIGHT VISION, AIMING DEVICES AND DAY OPTICS

MONOCULARS

CODE: NVHH02#sp – Multi-adaptable system.

Gen Gen 1+ IIT 60-70lp/mm

Magnification 1x

Lens system 35mm/F/1.7

Field of view (°) 30

Dimensions (mm) 159x49x82

Weight (kg) 0.37

Comments Head mount/handheld/rifle mount

NVHH03#pr

Gen Gen 1+ Gen 1+

Magnification 3x 5x

Lens system 50mm F/1.2 80mm F/1.7

Field of view 20.8 15

Dimensions (mm) 160x73x52 194x73x52

Weight (kg) 0.33 0.49

Comments Head mount/handheld/rifle mount

Head mount/handheld/rifle mount

NVHH#ny14

Available in Gen 2+ and Gen 3

Gen Gen 2+

Magnification 1x

Lens system 27mm/F/1.7 ; 47-54lp/mm till 64-72lp/mm



Weight (kg) 0.4

Comments Can be interlocked to form handheld night vision binoculars, rifle and helmet mounted

NIGHT VISION GOGGLES

NVG01 #NYX7

AVAILABLE IN GEN 2+, GEN 3HP+

Gen Gen 2+

Magnification 1x

Lens system 24mm/F/1.7 ; 45-51lp/mm – 64-72lp/mm



Weight (kg) 0.45

Comments

NVG02 #VEGN2

AVAILABLE IN GEN 2+, GEN 3

Gen VEG Gen 1+ NIN Gen 1+

Magnification 1x 1x

Lens system 35mm F/1.2 35mm F/1.7

Field of view 35 35

Dimensions (mm) 147x82x46 189x140x63

Weight (kg) 0.25 0.65

Comments IR810 long range illuminator w/transfer piece available

IR810 long range illuminator w/transfer piece available

NIGHT VISION BINOCULARS HAND HELD

NVB01 #DS & SP-B

Gen Gen 1+

Magnification 4x and 5x

Lens system 80mm/F/1.7



Weight (kg) 1.4

Comments IR810 Wide angle adjustable X-long IR illuminator

NVB03 #DIS bi-oculars

Available GEN2+ and GEN3

Model DIS 3x DIS 5x DIS 8x

Magnification 3x 5x 8x

Lens system 80mm F/1.65 108mm F/1.5 160mm F/20

Field of view (°) 12.5 9.5 6.5

Dimensions 265x140x63 305x140x86 350x140x100

Weight 1.0 1.3 1.5

Comments IR850 & camera adaptor IR850 & camera adaptor IR850 & camera adaptor

RIFLE SCOPES

#NVS-ORWWZ

AVAILABLE IN GEN2+ and GEN3

Model OR 3 OR 4 OR 5 WWZ

Magnification 3x 4x 5x 4x

Lens system 85mm; F/1.4 90mm; F/1.4 108mm; F/1.6 90mm; F/1.4

Field of view (°) 15 12 10 12

Dimensions (mm) 323x83x108 323x98x115 323x104x118 323x98x115

Weight (kg) 1.4 1.5 1.7 1.45

THERMAL IMAGING

#TI-PROM

FLIR Tau 2

Hand held and rifle mounted

Model P2 640-30

P3 640-30

P5 336-60

Magnification (NTSC/PAL) 1.5x/1.8x 2.7x/3.2x 5.0x/6.0x

Field of view X/Y (°) 14.8/11.8 4.3/3.3 4.3/3.3

Dimensions (mm) 255x70x70 275x70x75 275x70x75

Weight (kg) 0.55 0.65 0.65

LASER RANGE FINDERS.

Models #SS & #SM – Mountable LRF

The #SS and #SM represent the next generation laser rangefinders. Both of these devices are mountable LRFs that can be bore-sighted to any optical system. These powerful devices instantly add long range-finding capability in a compact, lightweight package. Used in tandem with an AndroidTM-based application that runs on smartphones and tablets, the #SS and #SM provide real-time distance, azimuth, inclination and GPS target data, and allow for real-time mapping and friendly force communication. With NATO-standard target ranges of 2,000m and 3,000m respectively, the models allow for simplified down range target data acquisition. Specifications: Range finder Laser safety Class 1, eye-safe Wavelength (nm) 905 1550 Measuring range, (m)* 10 - 2,000 10 - 3,000 Distance measuring accuracy (m) ±1 Azimuth measuring range (°) 360 Azimuth measuring accuracy (°) ±1 Inclination measuring range (°) ±60 Inclination measuring accuracy (°) ±0.5 First/Last target logic Yes Gating capability Yes Interface USB Visible Laser Laser safety Class 3R Wavelength (nm) 635±10 Optical Output Power (mW) <5 Display Integrated display OLED Display colour Red Mechanics, Electronics & Environmental Dimensions without mount (mm) 115x76.3x52 Dimensions with mount (mm) 115x76.3x74 Weight without batteries or mount (g) 325 Weight with mount (g) 443 Weapon mountable MIL-STD-1913 Power Supply 2x CR2 Battery life (# of measurements) 3,500 Operating temperature range (°C) -30 to +50 Storage temperature range (°C) -35 to +60 Waterproofing MIL-STD-810G *2.3m x 2.3m NATO standard target

Models Spotter LRF Pro.

The SPOTTER LRF and SPOTTER LRF PRO are a combined spotting scope/laser rangefinder systems. They make it faster, easier and more accurate than ever before to acquire range, inclination and azimuth data on long-distance targets. Both models are built to MIL-STD-810G standards and are fully ruggedized to handle real-world military deployment. With 15-45x variable magnification, fully multi-coated optics, an etched mil-dot reticle, USB output, and LED display, the SPOTTER LRF and SPOTTER LRF PRO are among the most versatile optics you can bring with you to the field. Both are compatible with an AndroidTM-based application and other peripheral devices. Specifications: Optics Magnification (x) 15 - 45 Objective lens (mm) 60 Exit pupil diameter (mm) 4.17 - 1.34 Eye relief (mm) 25-26 Field of view (°) 3.4 (15x) - 1.2 (45x) Axial resolution (center), (arcsec) 3.0 Diopters adjustment range, dpt ±5 Laser Rangefinder Eye safety Class 1, eye-safe Wavelength (nm) 905 1550 1064 nm laser protection Optional Specifi ed measuring range (m)* 10 - 2,000 10 - 3,000 Display Aiming reticle type Etched reticle (MIL Dot) Display type Customized matrix OLED Display brightness control Manual (8 levels) Mechanics, Electronics & Environmental Dimensions (mm) 280x140x105 Weight with battery (g) 1,590 Operational temperature (°C) -35 to +55 Storage temperature (°C) -45 to +65 Waterproof 1m/30min Environmental conditions MIL-STD-810G Tripod mounting pad Yes 3-axis digital compass Yes Internal power supply 2x CR123 Lithium Battery life (# of measurements) 5,000 Nitrogen fi lled Yes Interface USB *2.3m x 2.3m NATO standard target

Ultra-long & medium to long laser rangefinder binoculars.

#LRB12K & LRB12KN

The LRB12 is built to outperform any handheld laser rangefinder binocular available today. Packing a virtually endless set of performance features into a MIL-SPEC form factor, the LRB12 can handle anything professional operators can throw its way. Features include a 12,000m (NATO target) measuring range, built-in digital magnetic compass, built-in GPS receiver and a crystal clear LED display. The LRB12K requires virtually no maintenance, and very little operational training. Through USB and RS-232 interfaces, the LRB12 can be operated remotely, have its stored data exported, and communicate with external GPS systems and ballistic computers. Specifications Optics Magnifi cation (x) 7 7 / 5 (night) Objective lens diameter (mm) 42 Field of view (°) 6 6 / 7 Eye relief (mm) 20 Diopter adjustment range ±5 Interpupillary distance (mm) 58 - 72 Rangefinder Eye safety Class 1, eye-safe Wavelength (nm) 1550 Measuring distance range (m)* 10 - 12,000 20 - 12,000 Distance measurement accuracy (m) ±1 Azimuth measurement accuracy (°) ±1 Inclination measurement accuracy (°) ±0.5 Speed detection Yes First/last target logic Yes Gating capability Yes Gating step (m) ≥100 Scan mode Yes Peripheral compatibility PLGR, Bal Comp,PC,BT, Android TM Distance between objects Yes Horizontal distance between objects Yes Azimuth difference between objects Yes Inclination difference between two objects Yes Height difference between objects Yes User GPS coordinates Yes Target GPS coordinates Yes

Night vision systems

#NVS14 Single Tube System

The NVS 14 series of night vision monoculars have been proven in deployments in conflict zones and by peacekeepers around the world. All models utilize advanced Gen 3 image intensifier tubes with minimum, exportable FOM >1600; have a manual gain control system; built-in IR illuminator; auto shutoff mechanism; and are fully MIL-SPEC. The newly-improved NVS 14-3AG and NVS 14-3AGBW models are now, at 265g, the lightest night vision monoculars utilizing full-sized IITs available today. Both systems are auto-gated while the NVS 14-3AGBW produces a black-&-white image rather than the traditional green. All models are MIL-STD-810G, but with the GCS upgrade can be made submersible to 20 meters for 1 hour. Each NVS 14 series device can be handheld, weapon-, head- or helmet-mounted. With optional lens attachments that turn either model into a 3x or 5x night vision sight, and a full range of additional accessories, the NVS 14 series is amongst the world’s most versatile night vision devices. Specification Generation 3 Photocathode material GaAs IIT resolution, minimum (lp/mm) 64 Signal to noise ratio, minimum 25 Field of merit (minimum) 1600 Auto-gating Yes No Black & white phosphor No Yes No Optics Magnifi cation (x) 1 Field of view (°) 40 Objective F# 1.2 1.17 Objective focal length (mm) 25 27.5 Focus range (m) 0.25 - ∞ Eye relief (mm) 25 Diopter adjustment range -6 to +5 Mechanics, Electronics & Environmental Dimensions (mm) 114x68x49 118x69x49 Weight without batteries (g) 287 300 Built-in IR illuminator Yes Battery type 1x AA or 1xCR123 Reverse Polarity Protection Yes IR Operation Indicator Yes Automatic Shut-off System Yes Upright Shut-off System Yes Battery life (hours) 40 Operating temperature range (°C) -50 to +55 Storage temperature range (°C) -50 to +70 Waterproofing, standard MIL-STD-810G Waterproofing, GCS Upgrade 20m, 30min

#NVS15 – Dual Tube System

The NVS 15 series of night vision goggles has been proven in deployments in conflict zones and by peacekeepers around the world. All models utilize two advanced Gen 3 image intensifier tubes, with minimum, exportable FOM >1600, have a manual gain control system, built-in IR illuminator, auto shutoff mechanism and are fully MIL-SPEC. The newly-improved NVS 15-3AG and NVS 15-3AGBW are now the lightest dual tube goggles available today. Both systems are auto-gated while the NVS 15-3AGBW produces a black-&-white image rather than the traditional green. The NVS 15 series provides users with full depth perception, and is ideal for vehicle operation and any other dark environment task requiring acute situational awareness. The modular design of the NVS 15 allows for the detachment of the left or right eye device, while the proprietary bridge mount provides for inter-pupillary and other fine adjustments. All models are MIL-STD-810G, but with the GCS upgrade can be made submersible to 20 meters for 1 hour. Each monocular module in the NVS 15 can be handheld, weapon-, head- or helmet mounted. With optional lens attachments that convert the NVS 15 into 3x or 5x binoculars, and a full range of additional accessories, the NVS 15 series is among the world’s most versatile night vision devices. Specifications Generation 3 Photocathode material GaAs IIT resolution, minimum (lp/mm) 64 Signal to noise ratio, minimum 25 Auto-gating Yes No Black & white phosphor No Yes No Optics Magnifi cation (x) 1 (3x option available) Field of view (°) 40 Objective F# 1.2 1.17 Objective focal length (mm) 25 27.5 Focus range (m) 0.25 - ∞ Eye relief (mm) 25 Diopter adjustment range -6 to +5 Mechanics, Electronics & Environmental Dimensions (mm) 114x150x66 118x150x66 Weight without batteries (g) 676 725 Inter-pupillary distance (mm) 52 - 74 Built-in IR illuminator Yes Battery type 2x AA or 2xCR123 Battery life (hours) 40 Start-up time (seconds) <2 Operating temperature range (°C) -50 to +55 Storage temperature range (°C) -50 to +70 Humidity up to 95% non-condensing Waterproofing, standard MIL-STD-810G Waterproofing, GCS update 20m, 30min

#NVS27 - #NVS27M – Night Vision Clip on attachments

The NVS 27 is the most advanced night vision clip-on series to date, and represents a significant improvement on other clip-on systems currently available. This high-resolution unit is designed to mount in front of virtually any daytime riflescope. It differs from the competition in many ways, but primarily in its compatibility with day sight magnifications between 1x and 20x. As military and police shooters continue to use higher-magnification day sights, this compatibility range provides a significant advantage in the field, enabling the use of most, if not all, of a given day sight’s magnification capability. The NVS 27 series was designed by shooters, and its extra-wide field of view, manual gain control system, and extended target detection range make it the world’s most complete night vision clip-on system. Specifications Generation 3 Photocathode material GaAs IIT resolution, minimum (lp/mm) 64 Figure of merit, minimum 1600 Signal to noise ratio, minimum 25 Mean time to failure (hours) 10,000 Photocathode sensitivity, minimum, (μA/lm) 1800 Auto-gating Yes Auto-gating with black & white phosphor Optional Automatic brightness control Yes Optics Magnification (x) 1 Field of view (°) 13 Objective F# 1.0 1.5 Objective focal length (mm) 78 Focus range (m) 10 to ∞ Magnifi cation compatibility, recommended (x) 1 - 20 Mechanics, Electronics & Environmental Dimensions (mm) 240x97x107 220x87x90 Weight without batteries (g) 1,400 (with QR mount) 970 (with QR mount) Mount system QR Mount Height from the rail to the optical axis (mm) 42 30.5 Height from the rail to the optical axis (inches) 1.65 1.20 IR illuminator Optional Battery type 1x AA or 1x CR123 Battery life (hours) 50 Low battery indicator Yes Operating temperature range (°C) -55 to +65 Storage temperature range (°C) -60 to +70 Waterproofing 10m/1h MIL-STD-810G compliant Yes Bore-sight retention Permanent Bore-sight adjustment Not required

#DN493 – Night Vision Rifle Scope

The DN 493 is a next-generation night vision riflescope. This 6x magnification riflescope features a manual gain control adjustment; an advanced Gen 3 image intensifier tube; a MIL-DOT, LEDlit reticle with adjustable brightness; a Picatinny rail mount; removable infrared illuminator; and tactile wind-age and elevation adjustments. This scope is easy to service and maintain, and presents one of the lowest lifetime costs of ownership among riflescopes in its class. The DN 493_6x is battle-hardened and ready for deployment in combat or peacekeeping, as well as in public and private infrastructure security. Specifications Generation 3 Photocathode material GaAS IIT resolution, minimum (lp/mm) 64 Signal to noise ratio, minimum 25 Auto-gating Yes Auto-gating with black & white phosphor AGBW Optics Magnifi cation (x) 6 Field of view (°) 6.3 Objective F# 2.0 Objective focal length (mm) 165 Focus range (m) 20 to ∞ Eye relief (mm) 50 Diopter adjustment range -3 to +4 Mechanics, Electronics & Environmental Dimensions (mm) 300x98x90 Weight with mount (g) 1,400 Standard mount system MIL-STD-1913 Built-in IR illuminator Yes (removable) Battery type 2x AA Battery life without IR (hours) 60 Operating temperature range (°C) -40 to +50 Storage temperature range (°C) -45 to +55 Waterproofi ng MIL-STD-810G Ballistics Reticle pattern Mil-Dot Lit reticle Yes Adjustable reticle brightness Yes Wind-age adjustment step (MOA) 0.34 Elevation adjustment step (MOA) 0.34

THERMAL IMAGING SYSTEMS

#TVS-11M Thermal monocular

The TVS-11M tactical thermal monocular is the next generation of a tried and tested thermal monocular series. As a lightweight and compact handheld, helmet- or weapon-mounted device, the TVS 11M is well-suited to a variety of tactical, law enforcement, search-and-rescue and industrial applications. The TVS 11M utilizes passive infrared sensing technology allowing users to detect extremely small differences in the temperature of objects, people and other heat sources within the field of view. Unlike traditional night vision devices, the TVS 11M can be operated 24 hours a day; in daytime and at night (even in the total darkness of an enclosed space); has the ability to see through smoke, fog and other obscurants; and boasts a variety of colour and contrast settings and digital zoom capability. The TVS 11M can also be connected to external display devices allowing other parties to view the observed image in real time.

Specification

Resolution (pixels) 384x288 Operating wavelength (μ) 8 - 14 Sensitivity (mK @F1.0) <70 Video output PAL DRI range (m) Human 576/142/71 Vehicle 1,530/385/190 Multiple color options Yes Optics Objective focal length (mm) 17 Field of view (°) 22x16.5 Eye relief (mm) 25 Dioptric correction ±5 Zoom 2x, 4x Mechanics, Electronics & Environmental Dimensions (mm) 145x72x50 Weight without batteries (g) 375 Battery type 3.7V/1800mAh Li-on or 2xCR123 Lithium batteries Battery life (hours) 4 Operating Temperature range (°C) -35 to +55 Operating Temperature range (°C) -45 to +70 Waterproofing MIL-STD-810G Optional weapon-mounting systems S Mount, QR Mount Weapon compatibility Assault rifles, RPG - Aiming reticle Yes

#Sentinel LRF –Thermal Imaging Bioculars

The SENTINEL and SENTINEL LRF are advanced thermal imaging binoculars with a wide variety of tactical, law enforcement, border security and special force applications. The SENTINEL and SENTINEL LRF utilize a high-resolution uncooled thermal sensor to perceive differences in the thermal signature of objects within the field of view, and a large-diameter Germanium lens to extend their observation range. The SENTINEL and SENTINEL LRF can detect objects at remote distances 24 hours a day, through smoke, fog or camoufl age, and do not produce any audible sounds while in operation. The SENTINEL contains the same detection features as the SENTINEL LRF without the laser rangefinder capability. Specifications Detection, recognition, identification range to human with 640 version Resolution (pixels) 384x288 640x480 Pixel size (PI) 17 Operating wavelength (μ) 7 - 14 Sensitivity (mK @F1.0) <70 <55 Video output PAL DRI range (m)* 2,500/625/313 Optics Objective focal length (mm) 75 Field of view (°) 5.0x3.7 8.3x6.2 Eye relief (mm) 25 Dioptric correction -6 to +2 Zoom 2x, 4x Internal recording module Optional Mechanics, Electronics & Environmental Dimensions (mm) 208x146x90 210x146x89 Weight without batteries (g) 1,030 1,307 Battery type 6x AA Battery life (hours) 6 Operating Temperature (°C) -40 to +50 Waterproofing MIL-STD-810G Laser Rangefinder Laser Wavelength (nm) - 1,550 Measurement distance to 2.3x2.3m NATO (m) - 3,000 Distance measuring accuracy (m) - ±1 Device measurement capability (m) - 5,000 Azimuth measuring range (°) - 360 Elevation measuring range (°) - ±60

#TVC60 – Thermal Clip on Sight

The TVC 60 is a clip-on thermal weapon sight designed to be used in conjunction with a magnified day optic. When in use, the shooter relies on the zeroing of the day optic and does not need to re-zero when attaching or detaching the unit. The TVC 60 utilizes an uncooled thermal sensor that allows for the detection of camouflaged targets at long range. Equipped with a video output, the image captured by the TVC 60 can be viewed in real time by friendly forces, recorded and transmitted. Multiple image polarities and colour schemes, adjustable contrast and variable digital magnification all contribute to making the TVC 60 a valuable addition to any sniper’s kit. Specification Resolution (pixels) 640x480 Operating wavelength (μ) 8 - 14 Display AMOLED 800x600 Sensitivity (mK @F1.0) <55 Video Output PAL DRI Range(m)* 1330/330/170 Optics Objective focal length (mm) 40 Objective F number 1.0 Field of view (°) 15.5x11.7 Focus range 10m - ∞ Eye Relief 50mm Mechanics, Electronics & Environmental Dimensions with mount (mm) 172x91x89 Weight without mount and batteries (g) 780 Battery type 4 x AA Battery life (hours) 4 Operating Temperature (°C) -40 to +55 Waterproofing MIL-STD-810G Weapon mounting system MIL-STD-1913 Weapon compatibility Assault rifles, Sniper rifles

#TVS13M – Thermal Imaging Riflescopes

The TVS 13M thermal riflescope series is designed to act as a force multiplier in the most demanding situations faced by border patrol, law enforcement, tactical team snipers and special operations forces. The TVS 13M functions effectively in CQB, medium- and long-range target-engagement applications. Advanced in-built ballistics software allows for accurate fi ring on virtually any weapon platform, while a video output port and internal storage capability enable the capture of video and still images. With its extended range capability the TVS 13M (75) is ideal for long-range applications. Specifications Sensor TVS 13M TVS 13M (640) Resolution (pixels) 384x288 640x480 Pixel size (μ) 17 Operating wavelength (μ) 8 - 14 Full Frame Rates, PAL (Hz) 50 Display AMOLED 800x600 Sensitivity (mK @F1.0) <70 <55 Video Output PAL DRI range (m)* 1,800/450/225 Optics Objective focal length (mm) 54 Field of view (°) 7.0x5.2 11.5x8.6 Eye relief (mm) 30 Dioptric correction -6 to +2 Zoom 2x, 4x Mechanics, Electronics & Environmental Dimensions (mm) 270x75x102** Weight without batteries (g) 1194 (with mount)** Battery type 6x AA or battery cassette Battery life (hours) 8 Operating Temperature (°C) -40 to +50 Waterproofing MIL-STD-810G Shock resistance (G) 300 Ballistics Pre-programmed reticles 8 Programmable ballistic profiles 4 Automatic reticle colour inversion Yes Proximity sensor Yes Maximum Detection/Recognition/Identification to human-sized target

#TVS13M (75) – Thermal Imaging Riflescopes

The TVS 13M comes standard with a Picatinny quick release mount and can also be used as a hand-held observation tool. Unlike traditional night vision devices, the TVS 13M operates 24 hours a day without any degradation in performance when used in daylight, smoke or fog, and it can also penetrate camouflage. With a variety of other features including image-polarity selection, sepia, rainbow and other colour options, a proximity sensor and full MIL-SPEC design, the TVS 13M is the right choice for tactical applications in any environment. All TVS 13M models are now available with inclinometer and stability sensor. Specification

Sensor TVS 13M (75) TVS 13M (640-75) Resolution (pixels) 384x288 640x480 Pixel size (μ) 17 Operating wavelength (μ) 8 - 14 Full Frame Rates, PAL (Hz) 50 Display AMOLED 800x600 Sensitivity (mK @F1.0) <70 <55 Video Output PAL DRI range (m)* 2,500/625/313 Optics Objective focal length (mm) 75 Field of view (°) 5.0x3.7 8.3x6.2 Eye relief (mm) 30 Dioptric correction -6 to +2 Zoom 2x, 4x Mechanics, Electronics & Environmental Dimensions (mm) 285x90x112** Weight without batteries (g) 1,320 (with mount)** Battery type 6x AA or battery cassette Battery life (hours) 8 Operating Temperature (°C) -40 to +50 Waterproofing MIL-STD-810G Shock resistance (G) 500 Ballistics Pre-reprogrammed reticles 8 Programmable ballistic profiles 4 Automatic reticle colour inversion Yes

TACTICAL OPTICS

#LAS1000 – Sniper Detection System

The LAS 1000 detects snipers and other forward observers before they fire a shot. This system is ideal for border and perimeter security as well as VIP protection details. While most sniper detection systems are acoustic and help operators respond to a threat after it has already inflicted damage, the LAS 1000 functions on optical principles and can therefore pinpoint the location of a threat before it has a chance to act. Utilizing an eye-safe laser scanner, the LAS 1000 detects lenses and reflectors in its line of site even if these objects are covered behind bushes, windows or windshields. The detector can be handheld or mounted on a tripod and when an optical reflector of any kind is detected, its position is marked. For added situational awareness, an audio signal can also be set to automatically activate upon the detection of a threat. The LAS 1000 now has in-built GPS to determine the precise coordinates of detected threats. Specification Optics LAS 1000 Objective lens focal distance (mm) 50 / F2.0 CCD resolution (pixels) CCD, 752x582 Minimal illumination (lux) 0.005 Video output refresh rate (Hz) 50 Field of view (°) 5.2x4 Magnification 7x Display resolution (pixels) 800 x 600 OLED SVGA Diopter adjustment of the eyepiece ± 4 Detection parameters Maximum detection range, 4x30 weapon sight (m) 1,000 Minimum detection distance of the optical objects (m) 70 Distance measuring accuracy (m) 10 Angular size of the detection zone (° or mils) 1.8° / 32 mils (V) x 0.03° / 0.5 mils (H) Maximum horizontal scanning speed (°/sec) 30 Compass Measured azimuth range (°) 360 Accuracy ±2.0° RMS at level Inclinometer Measured elevation range (°) ±90 Accuracy ±1.0° RMS (within ±80°)

#NC1x12 // HDS3AA – Holographic Sights

The NC 1x21 and HDS 3AA red dot sights were designed and built for tactical law enforcement and military applications. Both sights allow rapid, accurate target acquisition for close-quarters battle (CQB) and are built with rugged, durable single-piece frames. The compact NC 1x21 is ideal for short-range CQB engagements. It has a variety of brightness settings and is fully compatible with night vision devices. Weighing in at just 132 grams, the NC 1x21 is an extremely lightweight upgrade to any weapon system. The tried-and-tested HDS 3AA is better suited to longer-range engagements than the NC 1x21. It’s multiple brightness settings and precise step adjustments make it accurate in conjunction with a wide variety of assault rifles. Fully compatible with night vision devices, the HDS 3AA can also be used with a 3x or 5x magnification flip-to-side add-on lens, allowing for extended viewing and engagement capability. Specification Optics NC 1x21 HDS 3AA Magnification (x) 1 1 (3 or 5 with add-on) Objective lens diameter (mm) 21 26 Parallax free Yes Eye relief (mm) Unlimited Diopter adjustment range - ±3 (with add-on) Ballistic Specifications Reticle pattern Red Dot Red dot size (MoA) 4 Lit reticle Yes Lit reticle colour Red Adjustable reticle brightness 11 Settings Windage adjustment step (MoA) 1.0 0.5 Elevation adjustment step (MoA) 1.0 0.5 Night vision compatible Yes Mechanics, Electronics & Environmental Housing material type Extruded High Strength Aluminum Co-witness with iron sights Yes - Dimensions (mm) 79x53x49 128x55x70 Weight (g) 145 332 Shock resistance (G) 500 500 Battery type 1x CR2032 1x AA Battery life, minimum (hours) 160 800 Operating temperature range (°C) -40 to +50 -40 to +60 Storage temperature range (°C) -40 to +50 -55 to +75 Humidity (%) 95 Waterproofing Standard 1m/ 30min Optional 10m/ 2h 10m / 1h Mounting MIL-STD-1913

#NC4x32 // NC6x50 – Magnified Day Sights

The NC 4x32 and NC 6x50 are weapon mounted tactical day optics. These devices feature 4x and 6x fixed-magnification respectively and are therefore ideal for short- to medium-range target acquisition. Both units feature an LED-lit Mil-Dot ranging reticle with multiple green and red brightness settings. These units can be used in conjunction with night vision devices and are compatible with virtually all assault rifles. The NC 4x32 and NC 6x50 are highly precise, ruggedized sights and have been battletested in a wide variety of environmental conditions. These are the right choice for military and police professionals requiring a fixed-magnification weapon sight for CQB and medium-range assault rifle target engagements. The optional backup red dot sight (NC BURD) enables rapid target acquisition even at close range. Specification NC 6x50 NC 4x32 Optics NC 4x32 NC 6x50 NC BURD Maximum magnification (x) 4 6 Objective lens diameter (mm) 32 50 Eye relief (mm) 72 Exit Pupil Diameter (mm) 8 - Field of view (°) 4.5 3 Diopter adjustment range ±3 Anti-reflective lenses Yes Ballistic Specifications Reticle pattern Rangefinding reticle Lit reticle Yes Lit reticle colour Red / Green Adjustable reticle brightness Yes Windage adjustment step (MoA) 0.33 0.25 Elevation adjustment step (MoA) 0.33 0.25 Mechanics, Electronics & Environmental Dimensions (mm) 139x57x79 168x75x81 Weight (g) 467 583 Shock resistance (G) 500 Battery type 1x CR2032 Battery life, minimum (hours) 160 Operating temperature range (°C) -40 to +50 Storage temperature range (°C) -40 to +50 Humidity (%) 95 Waterproofing Standard 1m/ 30min - Optional 10m/ 2h Night vision / thermal compatible Yes Mount type MIL-STD-1913

#S-ED // #S-M Spotter Series

The spotting scope series has taken a big leap forward with the introduction of the SPOTTER LRF and SPOTTER LRF PRO the first of their kind combined spotting scope/laser rangefinder systems. They make it faster, easier and more accurate than ever before to acquire range, inclination and azimuth data on long-range targets. Both models are built to MIL-STD-810G standards and are fully ruggedized to handle real-world military deployment. With 15-45x variable magnification, fully multi-coated optics, an etched mil-dot OLED reticle, USB output and LED display, the SPOTTER LRF and SPOTTER LRF PRO are among the most versatile optics you can bring with you to the fi eld. Both are compatible with our AndroidTM - based application and other peripheral devices. The Spotter ED and Spotter M continue to provide world-class optical quality in fully ruggedized, portable form. The Spotter M weighs in at under 300g. Specification Optics SPOTTER ED SPOTTER M Magnification (x) 20 - 60 8 Objective lens diameter (mm) 85 42 Focus range (m) 7 - ∞ 3 - ∞ Exit pupil (mm) 4.25 - 1.4 5.25 Eye relief, (mm) 20 - 18 17.5 Field of view @ 1,000yd min mag/ max mag(feet) 105 / 53 1008.0 Field of view @ 1,000m (m) 35.0 / 17.7 336 Diopter adjustment range ±5 ±3 Twilight factor 41.2 / 71.4 (min mag / max mag) 18.3 Relative brightness 18 / 2 (min mag / max mag) 27.6 Reticle type Mil-Dot M22 Mechanics & Environmental Weight (g) 1,300 336 Dimensions (mm) 432x105x174 142x60x57 Eyepiece type Straight Operating temperature range (°C) -40 to +60 -30 to +60 Storage temperature range (°C) -40 to +60 -30 to +60 Nitrogen purged Yes Waterproofing IP67

#Laser Aimers – LAM Series

The LAM series of weapon mounted laser aimers and illuminators are in service with military and police organizations worldwide. These military-grade devices utilize powerful visible and infrared lasers to provide accurate aiming and bright night vision illumination from any weapon system or optical platform. The LAM 3G is a three-channel laser featuring a green visible laser aimer, an IR laser aimer and an IR illuminator. It has solid audible/tactile step adjustment mechanisms that are easy to use and hold their positions after thousands of discharges. With a low power training mode and a high power in-field mode, this device can be safely utilized among friendly forces and quickly powered up for real-world target engagements. The LAM 10D is a single channel IR laser aimer designed to reach out to 1,000m. For night operations, this simple, extremely lightweight device is the right choice for professional operators demanding unrivalled performance and reliability.

Specification

Eye safety IIIb - Distance, day, low/high (m) 150/500 - Beam divergence, FWHM (mrad) 0.5 - Spot size @ 100m (mm) 50 - Wavelength (nm) 532 ±10 - Laser colour Green - Infrared Laser Aimer Eye safety IIIb Distance, low/high (m) 200/2,000 1,000 Beam divergence, FWHM (mrad) 0.5 0.3 Spot size @ 100m (mm) 50 30 Ballistics Windage adjustment step (mrad) 0.5 ; Windage adjustment range (mrad) 40 ±20 Elevation adjustment step (mrad) 0.5; Elevation adjustment range (mrad) 40 ±20 Retention after 1,000 shots (mrad) 1 Mechanics, Electronics & Environmental Dimensions (mm) 100x80x40 114x45x32 Weight without batteries (g) 278 150 Shock resistance (G) 300 Quick release Yes Battery type CR 123; Battery life, high / low (hours) 8 / 16 10 Operating temperature range (°C) -10 to +50 -40 to +60 Storage temperature range (°C) -40 to +60 Waterproofing IP67 45m/1h

#NCFL – Tactical Flashlights

NCFL Series is comprised of compact, mountable illumination/aiming systems that can be utilized on a wide variety of weapons including handguns and assault rifles. Each model in this series has a distinctly unique feature set, ensuring there is an NCFL unit perfectly suited to every application. NCFL 10: The only compact illuminator/aimer to feature a built-in digital camera that allows continuous video recording of armed encounters. This model also has a visible light illuminator and visible laser aimer. NCFL 9GI & NCFL 9RI: These models both have ultra-bright visible light illuminators, infrared aiming lasers for use with night vision devices, and visible laser aimers (green in the GI variant and red in the RI variant). NCFL 9: This model has an ultra-bright visible light illuminator and an infrared laser for use with night vision devices. Specification Visible Laser Built-In Digital Camera High Power LED Flashlight NCFL 9 NCFL 9 RI NCFL 9 GI Modes: OFF, Flashlight, Infrared Aimer Infrared Aimer, Flashlight+Red//Green Laser Flashlight Bulb C4 LED Light output (lumens) >180 >225 Visible laser distance (m) - 75 IR distance (m) 250 Visible laser / IR laser 830±10nm, <15mW 650±10nm at ≤5mW / 835±10nm at <10mW 530±10nm at ≤5mW / 835±10nm at <10mW Laser beam size (mm @ 10m) <Ø10 Mechanics, Electronics & Environmental Mounting requirements MIL-STD-1913 Picatinny Mount Battery 2 x CR 123 Lithium Hours of operation (hours) 40 (IR mode) 1.7 (Flashlight) ≥5 Operating temperature range (°C) -20 to +50 Storage temperature range (°C) -40 to +60 Dimensions (mm) 87x41x50 80x55x51 Weight w/o batteries (g) 106 115 Waterproof IP67 / 1m/30min Modes: Camera + Aimer, Camera + LED, Material 6061 Aviation Grade Aluminum and high strength Zytel polymer Colour Hard anodizing, matte black Flashlight bulb CREE Q5 Light output (lumens) 120 Flashlight modes Continuous, strobe Visible Laser Wavelength (nm) 650 Output power (mW) <5 Visible laser distance day, max (m) 50Spot size @ 10m 8 mm Camera: Image resolution 1920 x 1080 Picture element (megapixels) 2; Frames per second during recording 30 Field of view (°) 68, Card format Micro SD Storage capacity (MB/min) 110 Hours per 16G memory card 2.5 Maximum capacity (GB) up to 32

#IRIL 1000M – High Powered visible and infrared aimer//illumuinator

The IRIL 1000M long-range infrared aimer and illuminator features a high powered visible laser aiming channel. This device is designed to reach out to extreme distances to aid in target identification and engagement from ground and air-based platforms. Equipped with a Picatinny quick release mount, the IRIL series of illuminators can be mounted on virtually any rifle platform, or crew-served weapon system. The IRIL 1000M has 5 in-built laser patterns to select from to aid in laser identification. The IRIL 1000M has an adjustable beam divergence between 1 and 20 mrad, allowing for immediate transition between wide-area spot scene illuminator and accurate IR laser aimer. It’s extremely long maximum range provides significant optical advantage to professional night operators in all environmental conditions. Specification Visible Laser Aimer IRIL 1000M Eye safety 3R Distance, high (m) 500 (night) Beam divergence, FWHM (mrad) 1 Spot size @ 100m (cm) 100 Wavelength (nm) 532 ±10 Infrared laser Illuminator Eye safety 4 Distance, high (m) 30,000 Beam divergence, FWHM (mrad) 2 - 60 Spot size @ 100m, min divergence / max divergence (mm) 200-6000 Wavelength (nm) 810 ±10 Ballistics Windage adjustment step (MOA) 1.6 Windage adjustment range (MOA) ±120 Elevation adjustment step (MOA) 1.6 Elevation adjustment range (MOA) ±120 Retention after 1,000 shots (MOA) 2 Mechanics, Electronics & Environmental Dimensions (mm) 154x65x57 Weight without batteries (g) 425 Shock resistance (G) 500 Quick release Yes Battery type 1x 18650 Lithium Battery life, high / low (hours) 2 / 4 Operating temperature range (°C) -20 to +50 (IR) -10 to +50 (Green) Storage temperature range (°C) -40 to +60 Waterproofing IP67

#AN Series Tactical Day Binoculars

The AN series of binoculars incorporates Porro prisms and multi-coated lenses, delivering impressive light transmission and resolution for brilliantly clear vision. Non-slip UV-resistant rubber armouring makes these binoculars comfortable to operate even in cold weather. They are waterproof and shockproof, feature a military reticle and compass (AN 7x50 MC only) and adhere to the latest military standards while remaining light and compact. Specification Optics AN 8x30M22 AN 7x50MC AN 7x50M22 AN 10x50M22 AN 20x80M22 Magnification (x) 8 7 7 10 20 Objective lens diameter (mm) 30 50 50 50 80 Focus range (m) 3 - ∞ 5 - ∞ 5 - ∞ 6 - ∞ 18 - ∞ Exit pupil (mm) 4 7 5 4 Eye relief (mm) 17 23 23 19 16 Field of view - Angular (°) 8 7.2 8 7 3.3 Apparent fi eld of view (°) 8.0 7.5 8.0 7.0 66 Field of view @ 1,000yd (feet) 419 396 419 367 173 Field of view @ 1,000m (metres) 139.7 132 139.7 122.3 57.7 Diopter adjustment range ±5 ±10 Twilight factor 16 19 19 22 40 Relative brightness 14 51 51 25 16 Transmission (%) 90 95 Resolution (Center) (inches) - - - - ≤3 Lens & Prism coating FMC Prism Type BAK-4 Prism Glass Material BAK-4 Reticle type M22 Mechanics & Environmental AN 8x30M22 AN 7x50MC AN 7x50M22 AN 10x50M22 AN 20x80M22 Interpupillary distance (mm) 56-74 Weight (g) 595 1,046 1,363 1,309 2,498 Dimensions 110x160x54 152x190x83 195x195x75 180x190x73 298x230x95 Illuminated compass No Yes No Tripod mountable Yes Battery type na LR44 na Operating temperature range (°C) -30 to +60 -40 to +70 -40 to +80 Storage temperature range (°C) -45 to +75 -45 to +85 Nitrogen purged Yes Waterproofing MIL-STD-810G 6m / 30 min

#BGE 28x100ED – Ultra Long-range binocular

The BIG EYE 28x100ED is designed to meet the most demanding specifications and is capable of withstanding maritime weather. It is useful as a marine binocular, a border-guarding instrument, or for other applications where long-range viewing is required. The BIG EYE 28x100ED has massive objective lenses, BAK-6 prisms, and precision ground, multi-coated optics. Optical quality is extraordinary with true edge-to-edge image clarity. Oversized, individually-focusing ocular lenses are set at an angle for comfortable viewing, and have foldable eyecups. The mounted device swivels a full 360° horizontally and 135° vertically. The instrument is nitrogen-filled to prevent fogging. The BIG EYE 28x100ED is supplied with a hard case equipped with a lock. It can also be coupled with one or two NVS 14 series night vision monoculars for night operation. Specification Optics BIG EYE 28x100 ED Magnification (x) 28 Objective lens diameter (mm) 100 Focus range (m) 30 - ∞ Exit pupil (mm) 3.6 Eye relief (mm) 16 Apparent field of view (°) 70 Real field of view (°) 2.5 Field of view @ 1000m (m) 43.7 Inter-pupillary distance (mm) 53-76 Relative brightness 13 Diopter adjustment range -5 to +2 Lens coating FMC, ED Glass Mechanics & Environmental Weight, g 6,800 Dimensions 553x270x172 Tripod mountable Yes Operating temperature range (°C) -35 to +50 Storage temperature range (°C) -50 to +60 Humidity (%) 90 Nitrogen purged Yes Waterproofing MIL-STD-810G

#SIB 16x40WP – Image Stabilising Binocular

The SIB 16x40WP gyrostabilized binocular incorporates gyroscopic image stabilization technology that enables the user to observe distant objects from moving platforms without image resolution degradation caused by mechanical vibration or natural hand tremor. Combining fully-coated optics with a high-speed gyrostabilizing system, the SIB 16X40WP binocular is the ultimate instrument for long-range observation, tracking and surveillance. Specification Optics SIB 16x40WP Magnification (x) 16 Objective lens diameter (mm) 40 Focus range (m) 30 - ∞ Exit pupil (mm) 2.5 Eye relief (mm) 15 Field of view (°) 3.4 Field of view @ 1,000yd (feet) 178 Diopter adjustment range ±5 Transmission (%) 55 Lens coating FMC Reticle type None Mechanics, Electronics & Environmental Inter-pupillary distance (mm) 58 - 72 Weight (g) 2,200 Dimensions (mm) 230x190x120 Illuminated compass No Tripod mountable Yes Battery type 6x AA Battery life (hours) 6 Operating temperature range (°C) -30 to +55 Storage temperature range (°C) -50 to +70 Humidity (%) 98 ; Waterproofing IP66 Stabilization Specifications Stabilization technology Gyro; Angular velocity of panning (°/sec) 0 - 6

SECURITY SCANNERS

Vehicle scanners, luggage scanners/airport and bomb scanners available

Portable walk through metal detector Model NUC-700 Portable design, small size and easy move. 220V voltage.

Door panel walk through metal detector Model: NUC-600 Traditional fixed design Cannot fold, more stable and durable. 3.7-inch LCD screen, 18 zones. Remoter controller. Very popular for Police office, government office use.

Luggage scanner – use in airports, border control and military access points Liquid scanners Bomb detection Weapons detection Contraband detection

Vehicle scanners Used by militaries and border control Bomb detection Person detection Contraband detection

Handheld scanners Metal detectors

CONTACT DETAILS

MILITARY PRODUCTS (T/A CE DISTRIBUTORS)

UNIT 27, CONSTANTIABERG BUSINESS PARK

PRINCESSVLEI ROAD

DIEP RIVER, CAPE TOWN

SOUTH AFRICA

+27 21 7154335

EMAIL: [email protected]

Website: www.militaryproducts.co.za

mailto:[email protected]

http://www.militaryproducts.co.za/

premier suppliers of tactical military and security ... · includes black, polyester pouch clear...

Documents