PREMIER SUPPLIERS OF TACTICAL MILITARY AND SECURITY PRODUCTS SINCE 1989
Military Products based in South Africa is a registered supplier of tactical military and security products to the SA Defence Force, Air Force Police Force (SAPS) Armscor. The company has Security Clearance to deal in classified military/security goods and products. Military Products was established in 1989 in Cape Town South Africa. The company provides tactical military and security products. All items are supplied to the End User’s/client’s specifications. The following catalogue is indicative of what the company has supplied, however not limited to the following items and supply according to End User’s requirements. The company works close in hand with JV partners including well-known armament brands and military vehicles (land, air and sea).
The company product offering is not limited to the military sector and has been extended to the oil and gas industry. Supply of specialised safety gloves and coveralls that meet and conform to acceptable international standards AS2161.2
The company has and continues to supply governments and private security firms in Southern Africa, West Africa, Central Africa, East Africa, UAE and the Middle East. We specialise in supplying national defence units and private security both locally within South Africa and Africa as well as overseas. All products have MOQs (minimum order quantity). Products are supplied according to client’s specifications and manufactured to Mil-Spec. where required.
WE PRIDE OURSELVES ON:
* Delivering products to client’s specifications of highest standards. * Executing delivery timeously and professionally. * Delivering of the most competitively priced products.
INDEX PAGE (PLACE CURSOR OVER ITEM OF INTEREST AND ENTER)
COMBAT UNIFORMS/CLOTHING
TACTICAL COMBAT UNIFORM SETS - UNDER SHIRTS/PANTS
TACTICAL UNIFORMS – PRIVATE SECURITY PROTECTION
HEADWEAR
TACTICAL JUMP SUIT
PILOT COVERALL
TACTICAL RAIN WEAR/WINDPROOF JACKETS
GLOVES
FOOTWEAR
BELTS/ELBOW AND KNEE PROTECTION
TACTICAL EYEWEAR
BACKPACKS
MILITARY BAGS/ KIT BAGS
HYDRATION BACKPACK
TENTS
SLEEPING BAGS/CAMP COTS/STRETCHERS
OPERATIONAL COMBAT MEDICAL BAGS AND CORPSE RECOVERY BAGS
MRE PACKS (MEAL READY TO EAT)
WATER BOTTLES & CANTEEN SETS
HOLSTERS/MAG POUCHES/SHOT SHELL CARRIERS
RIFLE SLINGS AND PISTOL LANYARD
BALLISTIC // BULLET PROOF// STAB PROOF VESTS//BULLET PROOF HELMETS
ASSAULT VESTS
RIOT GEAR
RIOT HELMETS
RIOT SHIELDS
GAS MASKS
BATONS
HANDCUFFS AND RESTRAINTS
EOD – BOMB DISPOSAL SUIT
NIGHT VISION, AIMING DEVICES AND DAY OPTICS
SECURITY SCANNERS
COMBAT UNIFORMS/CLOTHING
BDU/ ACU/M65 JACKETS/UNIFORMS SPECIFICATIONS
Material 65/35 Polycotton rip stop
200-250gsm
Jacket: Turn down collar, 4-6 pockets, pouches, zipper or
button on front for closing.
Pants: combat type 4 pocket with two side seam pockets.
Waist band with belt loops and draw string ankles.
Available in all camouflage and plain colours.
TACTICAL COMBAT UNIFORM SETS - UNDER SHIRTS/PANTS
Under armour shirts.
Typically worn under combat jackets.
Poly cotton sleeves 200 gsm with Velcro patch and
pouch on arm
Torso “wick away” moisture management for
breathability.
Fold collar
Available in all colours/camouflage
Pants have inserts for knee pads
TACTICAL UNIFORMS – PRIVATE SECURITY PROTECTION
TSLS01 TSSSO1
TP01 TPO2
Poly cotton rip stop fabric is highly breathable yet ultra- durable
Teflon coating resists stains, maintaining a neat, professional look
65% polyester/35% cotton rip stop
Patented hidden-document pockets
Bi-swing shoulders for easy movement
Reinforced elbows
Dual pen pockets on left forearm
Treated for stain & soil resistance
Colours: Khaki, Olive green, Black, Navy Blue or to spec.
HEADWEAR
BOONIE TACTICAL CAP
BEANIE TACTICAL BALACLAVA
Constructed from durable 50/50 Cordura nylon cotton rip stop
Meets US Military specs
Brass screen vents
Adjustable chin strap
All camouflage and plain
Rip stop
Mechanical stretch
Moisture-wicking, quick-dry
Anti-microbial
UPF 50+ protection
All colours camouflage
Premium 100% acrylic knit beanies/watch caps embroidered directly on the cuff
Anti-piling caps provide comfort, warmth and shape retention, as well as instant identification
One size fits all
All colours
Constructed from a lightweight 6.6 oz. 100% polyester/spandex grid plaited jersey knit that stretches
Flat locked construction
Treated with Microban for anti-microbial and anti-order defense
Available in fire retardant Nomex®
BERET DRESS CAP
BDU CAP PETTY CAP
Made from 100% composite wool.
Black cotton lining inner, black textile
nylon headband with fabric tape for
adjustment to head size
All colours
To clients’ specifications
Made from 50% wool 50% polyester.
Black cotton lining inner, black textile
nylon headband
Braid as per client
Reinforce peak
Designed to clients’ specifications
Rip stop
Mechanical stretch
Moisture-wicking, quick-dry
Anti-microbial
UPF 50+ protection
All colours camouflage
To clients’ specifications
Reinforced poly-cotton
Moisture-wicking, quick-dry
Anti-microbial
UPF 50+ protection
All colours and camouflage
To clients’ specifications
TACTICAL JUMP SUIT
Tactical Utility Jumpsuit features:
6 oz, 65% polyester, 35% cotton twill construction
Double-needle lap-seam construction on all major seams for superior durability
Reinforced knee patches for additional durability
UV 40+ defense keeps fabric from fading
Heavy-duty two-way front brass zipper with welt cover to prevent snagging
Two zippered chest pockets with pen/penlight slot on left pocket
Two-position snap closure at wrists for exact fit
Two zippered rear hip pockets
Two concealed side-seam pockets with bypass
Two diagonal-zippered cargo pockets on thigh
Diagonal-zippered calf pocket on lower right leg
Elasticized waistband with large belt loops that securely hold a heavy-duty belt
Machine washable
All colours available
PILOT COVERALL
Features NOMEX, a flame-resistant, non-melting material (92% meta aramid/5% para aramid/3% conductive fibers)
Sewn to military specifications FNS/PD 96-17 (MIL-C-83141A)
Felled seams throughout for enhanced durability
Six primary pockets with additional accessory pockets
Reinforced shoulders to prevent wear
Two-way zipper front with cloth pull
Bi-swing back improves range of motion
All colours
Manufactured to all specs.
TACTICAL RAIN WEAR/WINDPROOF JACKETS
REVERSABLE RAIN JACKET
MILITARY PONCHO
100% nylon shell
Waterproof and breathable laminate
Sealed seams to keep you dry
100% polyester lining
Zip front with snap closures
Removable liner black fleece liner
6 pockets: 2 chest, 2 hand warmer and 2 inside chest pockets
Adjustable cuffs
3M™ Scotchlite™ reflective tape
Built-in hood with snap closure
Mic loops, badge tab and side zips
All colours
100% nylon shell
Waterproof and breathable laminate
Sealed seams to keep you dry
Built-in hood with snap closure
All colours
RAIN SUIT
100% nylon shell or Gortex ®
Waterproof and breathable laminate
Sealed seams to keep you dry
Built-in hood with snap closure
Jacket four pocket type with sealed seams
Pants side seam access pockets elasticated waist and leg cuffs
All colours
GLOVES
FULL FINGER TACTICAL GLOVES: LEATHER/KEVLAR/NOMEX
FTG01 FTG02 TG01
CUT RESISTANT/NEEDLE RESISTANT PATROL GLOVES
CR01 CR02 CRN01
DRESS LEATHER GLOVES – ANY COLOUR LINED OR UNLINED
Leather/Amara combination
Spandex
Reinforced TPE protector with tactical
joints
Long or short fingered
All colours
Leather/Amara combination
Kevlar® lined
Spandex combo upper
Cut and needle resistant
All colours
NOMEX TACTICAL AND PILOT GLOVES
CATEGORY: SOUTH AFRICAN: MILITARY, POLICE AND AIR FORCE GLOVES
MULTI-PURPOSE GLOVES
Leather (Nappa or to spec.)
Unlined or lined
All colours
Constructed with flash-resistant fabric back
Nomex®/DuPont™ KEVLAR® blend construction
Durable, yet soft premium leather goatskin palm
Gauntlet design for forearm protection
Engineered to U.S. military specifications
Sewn entirely with Nomex® thread
SANDF SPEC: 05181-100-040
Green knitted gloves with black pvc dots
SANDF Spec SALM 05181-100-041.
Navy blue knitted gloves
SAPS Spec 2750/2011.
SP Guard cotton gloves
SA AIRFORCE Spec SALM 173.
National Ceremonial Guard gloves (NCG)
SANDF/AIRFORCE Spec: 05741-100-018
Load master leather gloves long cuff length
SA AIRFORCE TYPE B FIG 4 (SABS 1297)
Men’s uniform gloves brown leather unlined gloves (available in all colours)
SANDF Spec: SALM 05741-100-198/SAPS 319
Women’s uniform brown leather unlined gloves (available in all colours)
SANDF Spec: SALM 05741-100-198 / SAPS 319
Cream leather unlined gloves SAMHS (SA Military Health Services)
Women’s uniform gloves.
Spec: SALM 05741-100-198
Cream leather unlined gloves SAMHS (SA Military Health Services)
Men’s uniform gloves.
Spec: SALM 05741-100-198
White leather unlined gloves men
SA AIRFORCE Spec SALM 174.
White leather unlined gloves women
SA AIRFORCE Spec SALM 175.
Black leather fleecy lined gloves – unisex
SA AIRFORCE Spec SALM 178.
AFV Nomex Pilot gloves
SA Airforce, SAPS Airwing and SANDF
Spec: 05181-100-087 – NOMEX/LEATHER/AMARA
WORK IMPACT GLOVES KEVLAR/AMARA/PU
USE IN OIL AND GAS INDUSTRY
GLOVES CAN BE CUSTOMISED WITH COMPANY LOGO AND COLOURS
Conforms to AS 2161.2 Standards
EN374 – Wet work – oil and chemical resistant
EN388 – Mechanical work – cut, abrasion and impact resistant
EN407 – Heat resistant
FOOTWEAR
COMBAT BOOT
DRESS FOOTWEAR
OFFICE FOOTWEAR GEORGE BOOT DRILL BOOT
Outer Shell leather/cordura
Gore-Tex® as option
Waterproof and breathable
OrthoLite® sock liner
Ankle protection and support
Optional side zipper
Trail stability
Added toe cap for protection
Speed lace upper
Light weight
Leather upper (patent or matt)
Leather soles or PU/rubber soles
Hi-Gloss upper is easy to clean and never needs to be polished
Lining absorbs perspiration and resists odors and mildew
Shock-absorbing EVA outsole provides extra comfort and important heel cushion
Velours and polyurethane foam padded insole
BELTS/ELBOW AND KNEE PROTECTION
TB01 TB02 TB03
TB04 TB05 TB06
TBS001 TBS002 CX01
All belts made to order
Stable belts/Uniform belts
Tactical belts
Quick release buckles
Nylon
100% ballistic nylon or webbing
Fade and scratch resistant
Lined options
Knee and elbow pads
Material: PE+EVA
Flexible design or Rigid design
Tactical buckles
Internal foam
Supplied as inserts for Tactical pants Any colour
TACTICAL EYEWEAR
TEW01 TEW02
TEW03 TEW04
Clear polycarbonate lenses, extra lenses supplied
Meets ANSI Z87.1-1989 standards and MIL-STD-662E V50
1-1/4"W adjustable strap
Anti-fog inner lens, scratch-resistant outer lens
Filtered vents
Black/tan frame with foam padding for comfort and stability
Goggles fits over most prescription glasses
Includes black, polyester pouch
Clear polycarbonate lens
Meets ANSI Z87.1-1989 standards and MIL-STD-662E V50
1-1/4"W adjustable strap
Anti-fog inner lens, scratch-resistant outer lens
Filtered vents
Black/tan frame with foam padding for comfort and stability
Dust resistant
Includes black, polyester pouch
Meets and exceeds ANSI Z87.1 impact Standards
Resists penetration from high speed objects
100% optically correct polycarbonate lenses
Comfort fit TPR nosepieces
Brow contact relief guard
Ultra-light frame design provides memory flex comfort and added durability
Blocks 99.9% of harmful UVA and UVB rays
BACKPACKS – MANUFACTURED TO SPECIFICATION
TB01
TB02
TB03
600 Oxford waterproof
Multi pouch
Multi compartment
1 – 3 day assault pack
All colours/camouflage
600 Oxford waterproof
Multi pouch
Multi compartment
Bergen 7-10 day pack
All colours/camouflage
600 Oxford waterproof
Multi pouch
Multi compartment
Bergen 7-10 day pack
All colours/camouflage
MILITARY BAGS/ KIT BAGS
KB01
KB02
KB03
600 Oxford waterproof
Multi pouch/molle system
3 compartment
30-50ltr pack
Handles and straps/backpack
All colours/camouflage
600 Oxford waterproof
Multi pouch
9 compartment
30-50ltr pack
Handles and straps/backpack
All colours/camouflage
600 Oxford waterproof
1 compartment
30-50ltr pack
Handles and straps
All colours/camouflage
HYDRATION BACKPACK
HP01
HP02
HP03
600 Oxford waterproof
Multi compartment
1 Day pack storage
Molle system
3Ltr hydration bladder with one
way valve system
All colours/camouflage
600 Oxford waterproof
Multi compartment
3 Day pack storage
Molle system
3-5ltr hydration bladder with one
way valve system
All colours/camouflage
600 Oxford waterproof
Side compartment
3ltr hydration bladder with one
way valve system
All colours/camouflage
TENTS
COMMAND/MESS TENT
SINGLE MAN TENT
All tents manufactured and supplied to customer specifications
100% Cotton canvas
500g/sqm waterproof
Mould proof
Anti- corrosive
All sizes
Signal jamming
Brown, Olive or camouflage
100% Cotton canvas
500g/sqm waterproof
Mould proof
Anti- corrosive
All sizes
Snap sheets
Brown, Olive or camouflage
SLEEPING BAGS/CAMP COTS/STRETCHERS
CC01 – CAMP COTS FOLD OUT
ROLL MATRESSES
SLPB01 – SLEEPING BAGS
200x70x45cm
600D oxford
Aluminium frame
Frame thickness 0.9mm-1.2mm
Fold away to carry bag
Can be customised
200x70x45cm
High density memory foam
Available in self- inflating and
deflating units
Light weight
225x85x50cm
Poly 190T PA shell
Poly 190T lining
Spray bonded cotton
Weight 2kg with bag
Side or centre zipper
All colours and camouflage
OPERATIONAL COMBAT MEDICAL BAGS AND CORPSE RECOVERY BAGS FMK001
KMK002
BB01
Medic pack – individual trooper
240x200x50mm
Molle medical pouch, single man
Contents supplied to specification
Medic pack – full emergency pack
Multi compartment
Multi treatment in field
Contents supplied to specification
Body recovery bags
Confirm to OSHA 3130 standards
Available in materials PEVA, LDPE, PVC
Chlorine free
Can be incinerated
Supplied to specification
MRE PACKS (MEAL READY TO EAT)
XMREs are all freshly packed with 2100 – 2500 calories of US. Military grade components.
HALAL/Kosher/Vegetarian: Type Certified: No pork or Pork By-products available.
Can be designed for African Diet
Extended Shelf Life: 3 years or more depending on storage temperature and conditions from date of pack
3-6 different menus available if no special dietary requirements needed ( Customer choice at the time of order)
All the contents are fully cooked and does not require water.
Everything can be eaten out of the pouch and packets anytime, anywhere (hot or cold).
Flexible foil Packaging
Lightweight
Water proof
Dust proof packaging
Tamper proof
Available in 12hr and 24hr meal packs
WATER BOTTLES & CANTEEN SETS
Supplied to specification
MK01
MK02
WB01
WB02
Full canteen set PU/Aluminium
2ltr bottle
Utensils
Heat resistant cooking receiver
2 containers
All units inter connect and stored as
one unit in pouch
Aluminium bottle and canteen
1ltr bottle
Heat resistant cooking receiver
2 containers
All units inter connect and stored as
one unit in pouch
Plastic bottle and aluminium canteen
1ltr bottle
Heat resistant cooking receiver
All units inter connect and stored as
one unit in pouch
Plastic bottle
3ltr bottle
Stored as one unit in pouch
Strap and belt loop
HOLSTERS/MAG POUCHES/SHOT SHELL CARRIERS
#CY-NY-BHM-001 - Holster
#CY-G19 - Holster
#CY-MP-G3 – Mag holder
#CY-GRG – Grip glove
#CY-MG-G01 – Mag well
High quality 900D Nylon holster, Suitable for Bersa, Beretta, Glock,
Ruger, Taurus, Smith and Wesson, Walther and many more.
Entire barrel covered, open muzzle design
Spare magazine pouch with adjustable flap on front of holster
Fits belt widths up to 2" (53 mm)
Adjustable Thumb Break and easily clips onto a belt
Designed for comfort and quick draw
Holster for Glock 17 19 22 23 31 32 34 35 pistols Made by high quality polymer material; Paddle part with more soft silicon material to touch the body; Rotates 360°for every applications; Lock system, press release Interchangeable with belt loop and leg rig system. Magazine pouch
Magazine Pouch - polymer Interchangeable with Paddle, Belt or leg rig system Allows for secure storage of magazines and quick access Glock17 19 22 23 31 32 34 35 etc. magazine.
Slip-On Grip Glove fits for Glock 17 19 20 21 22 23 31 34 35 37. Made from ultra-soft, ultra-stretchy rubber material It helps absorb recoils Its ventilated designing keeps hand comfortable and dry Ideal for Concealed Carry It fits Glock compact pistol series
Black Polymer innovative Mag Well helps you fast smooth reloading your mag without fumbling around; The Following GLOCK Models: 17, 17L, 22, 24, 31, 34, 35, and 37. Full-sized 9mm, .40, .45 GAP, and .357 Sig Gen 1, 2 or 3 Glock
#CY-GA-G01 - Grip
#CY-1911 - Holster
#CY-T92 - Holster
#CY-MP-P2 – Mag holder
#CY-T24/7 - Holster
#CY-T800 - Holster
Changes the grip angle. Provides better control during rapid firing Utilizes an enhanced grip tang which provides leverage for, and protection to the firing hand Beaver Tail fits for Gen 1 2 3 Glock 17 19 22 23 24 31 32 34 35 37 38
Holster for 1911 Variants pistol; Made by high quality polymer material; Paddle part with more soft silicon material to touch the body; Rotates 360°for every applications; Press button lock system for quick release Interchangeable with belt loop and leg rig system.
Holster for Taurus PT92 pistol; Made by high quality polymer material; Paddle part with more soft silicon material to touch the body; Rotates 360°for every applications; Press button lock system for quick release Interchangeable with belt loop and leg rig system.
Magazine pouch for Taurus PT92, PT809, PT605 pistol; Made by high quality polymer material; Paddle part with more soft silicon material to touch the body; Rotates 360°for every applications; Press button lock system for quick release Interchangeable with belt loop and leg rig system.
Holster for Taurus 24/7 & 24/7-OSS pistol; Made by high quality polymer material; Paddle part with more soft silicon material to touch the body; Rotates 360°for every applications; Press button lock system for quick release Interchangeable with belt loop and leg rig system.
Holster for Taurus PT809/PT840/PT845, 24/7, 24/7pro, 24/7 G1 pistol; Made by high quality polymer material; Paddle part with more soft silicon material to touch the body; Rotates 360°for every applications; Press button lock system for quick release Interchangeable with belt loop and leg rig system.
#CY-MP – Mag holder
#CY-DLP – Drop leg platform
#CY-BC – Belt loop system
#CY-SC-M – Shot shell carrier
#CY-GL01
Holsters and Mag holders can be made to specification
Magazine pouch for Taurus 24/7, Beretta Px4; H&K P30; H&K USP Compact (9/40); Ruger SR9; Steyr M Series; S&W Sigma; Taurus 24/7, PT845, PT840 pistol Made by high quality polymer material; Paddle part with more soft silicon material to touch the body; Rotates 360°for every applications; Press button lock system for quick release Interchangeable with belt loop and leg rig system.
Drop leg platform offers versatility of a modular platform which compatible with all holsters and magazine pouches. High-tech, black polymer main attachment panel Fully adjustable straps with side release buckles Easily attach holsters, mag pouches.
Belt Clip Compatible with all Holsters and Mag. Holders Easy interchangeability with “alan key system” Adjustable for most military/police belt widths
The durable, corrosion resistant polymer shell holder is attached to a rugged, aluminium backing plate that installs directly on the shotgun receiver. Allows for 6 extra rounds for accessible fast reloading. All mounting screws are included, no gun smithing required. Installation is easy, and in most cases requires no alterations to the shotgun.
Combo trigger lock and key lock Designed to lock your trigger mechanism for added security and protection. You can set your own digit combination for security and convenience. Handguns ,rifles and shotguns. .
RIFLE SLINGS AND PISTOL LANYARD
TRS01 (1 point) TRS02 (2 point) TRS03 (3 point)
TPL01 PISTOL LANYARD EXTENDABLE
Rifle slings:
I point, 2 point and 3 point, High strength nylon weave, Rot/mould proof
High tensile clips and buckles, “Bungee cord” for rapid deployment of weapon
Available in black, olive and tan
Pistol lanyard/retention cord:
High strength nylon weave, Rot/mould proof
Extendable cable coated in plastic/rubber
High tensile clips and buckles
Secures handgun from theft and allows shooter maximum control of weapon
Available in black, olive and tan
BALLISTIC // BULLET PROOF// STAB PROOF VESTS//BULLET PROOF HELMETS
BPVTV01 BPVCV01 PBVNV01 BPVTV02
Cordura 600D outer material waterproof
With or without Molle systems
Inner ballistic panels either Kevlar or Aramid Gold Flex.
Each with extra pouches front and back for extra plate insertion.
NIJ 010.06
NIJIIIA and NIJIVA ICW
Manufactured to specification with ballistic reports.
Available in Maritime options.
All colours and camouflage
Strike plates 2-2.2kg, Level NIJIVA ($45-70/plate)
PASGT helmet NIJIIA Kevlar/Aramid ($110-164)
FAST helmet NIJIIIA with rails fitted for attachment of communications and night vision
Manufactured to specification with ballistic reports.
Available in Maritime options
All colours and camouflage
ASSAULT VESTS
TCV01 TCV02 TCV03
TCV04 TCV05 TCV06
Material cordura 600D
Mesh material for breathability
Quick release buckles
Molle system
Utility pouches supplied to client’s spec.
All colours and camouflage
Material cordura 600D
Mesh material for breathability
Quick release buckles, Molle system
Utility pouches supplied to client’s spec.
All colours and camouflage
CAN BE SUPPLIED AS NIJIIIA and NIJIVA
RIOT GEAR
RIOT SUITS
All suits supplied to specification
Impact, abrasion, stab and flame resistant
All suits supplied with test reports
Suits supplied with carry bags
Goggles and helmet is extra
Logos can be applied at factory level
SUITS CAN BE SUPPLIED IN COMPONENT FORM –
ARM, LEG, CHEST
RIOT HELMETS
RH01 RH02
RIOT SHIELDS
RS01 -Ballistic RS02 (SHOCK) RS03
Two basic helmets available
Face guard with metal grill
Face guard without metal grill
Impact, abrasion and flame resistant
Adjustable with quick release buckle system
Neck protectors
Logos can be applied at factory level
Polycarbonate
Ballistic options
Interlocking system
Shock shields
Logos applied at factory level
Manufactured to specification
GAS MASKS
GM01 GM03
BATONS
TB01 EB01 SB01
Full vision
CBRN standards
Gas filters protection level A2B2E1-P3
All masks supplied to specification with
test reports
Tonfa baton
ABS+PC
60cm length
With holder
Extendable baton
Coated 4140 steel
560mm open length
220mm closed
Stun baton
7.2V
˂1.9A con for shock
˂0.8A con for light
HANDCUFFS AND RESTRAINTS
HCHR01 HCH01 HRCL01
Hinge type cuff mould centre Hinge type cuff with pouch Chain link cuff with pouch
LRC01 LHR01 NRC01
Leg restraints Leg and hand restraints Nylon cuffs/restraints
All hand cuffs manufactured from the carbon steel, stainless steel is available on request.
Handcuff average weight 300g
Supplied with pouch in leather or cordura
Link or hinge options
All restraints manufactured from the carbon steel, stainless steel is available on request.
Average weight 300 - 400g
Nylon restraints in black and white.
EOD – BOMB DISPOSAL SUIT
General Description
Subassembly
Full protection EOD helmet, Adjustable transparent visor
Ventilating system
Communication system (optional)
Illuminating system (optional)
Protection suit: Jacket and Trousers, Chest and groin enhanced plates
Spine protection device, Groin protection short trousers
Quick-release device, Hands & feet protection, knee pad
Trousers widened article
EOD boots (optional)
Cooling jacket (optional)
Weight Total weight 35kg, Protection suit 25.5kg (with enhanced plates)
EOD helmet 3.5kg, Accessories 6kg
V50
Helmet ≥720m/s ; Visor ≥850m/s
Transparent window≥750m/s ; Surface ≥600m/s
Plates ≥1600m/s
(Higher level of protcetection can be customized)
Against Shock
Wave Performance
Tested with Hybrid dummy many times, shows ultra-strong
performance
Color Dark blue, camouflage (customization as requirement)
Testing Institution German Beschussamt Mellrichstad laboratory
NIGHT VISION, AIMING DEVICES AND DAY OPTICS
MONOCULARS
CODE: NVHH02#sp – Multi-adaptable system.
Gen Gen 1+ IIT 60-70lp/mm
Magnification 1x
Lens system 35mm/F/1.7
Field of view (°) 30
Dimensions (mm) 159x49x82
Weight (kg) 0.37
Comments Head mount/handheld/rifle mount
NVHH03#pr
Gen Gen 1+ Gen 1+
Magnification 3x 5x
Lens system 50mm F/1.2 80mm F/1.7
Field of view 20.8 15
Dimensions (mm) 160x73x52 194x73x52
Weight (kg) 0.33 0.49
Comments Head mount/handheld/rifle mount
Head mount/handheld/rifle mount
NVHH#ny14
Available in Gen 2+ and Gen 3
Gen Gen 2+
Magnification 1x
Lens system 27mm/F/1.7 ; 47-54lp/mm till 64-72lp/mm
Field of view (°) 40
Dimensions (mm) 140x49x69
Weight (kg) 0.4
Comments Can be interlocked to form handheld night vision binoculars, rifle and helmet mounted
NIGHT VISION GOGGLES
NVG01 #NYX7
AVAILABLE IN GEN 2+, GEN 3HP+
Gen Gen 2+
Magnification 1x
Lens system 24mm/F/1.7 ; 45-51lp/mm – 64-72lp/mm
Field of view (°) 40
Dimensions (mm) 150x102x70
Weight (kg) 0.45
Comments
NVG02 #VEGN2
AVAILABLE IN GEN 2+, GEN 3
Gen VEG Gen 1+ NIN Gen 1+
Magnification 1x 1x
Lens system 35mm F/1.2 35mm F/1.7
Field of view 35 35
Dimensions (mm) 147x82x46 189x140x63
Weight (kg) 0.25 0.65
Comments IR810 long range illuminator w/transfer piece available
IR810 long range illuminator w/transfer piece available
NIGHT VISION BINOCULARS HAND HELD
NVB01 #DS & SP-B
Gen Gen 1+
Magnification 4x and 5x
Lens system 80mm/F/1.7
Field of view (°) 14
Dimensions (mm) 225x150x60
Weight (kg) 1.4
Comments IR810 Wide angle adjustable X-long IR illuminator
NVB03 #DIS bi-oculars
Available GEN2+ and GEN3
Model DIS 3x DIS 5x DIS 8x
Magnification 3x 5x 8x
Lens system 80mm F/1.65 108mm F/1.5 160mm F/20
Field of view (°) 12.5 9.5 6.5
Dimensions 265x140x63 305x140x86 350x140x100
Weight 1.0 1.3 1.5
Comments IR850 & camera adaptor IR850 & camera adaptor IR850 & camera adaptor
RIFLE SCOPES
#NVS-ORWWZ
AVAILABLE IN GEN2+ and GEN3
Model OR 3 OR 4 OR 5 WWZ
Magnification 3x 4x 5x 4x
Lens system 85mm; F/1.4 90mm; F/1.4 108mm; F/1.6 90mm; F/1.4
Field of view (°) 15 12 10 12
Dimensions (mm) 323x83x108 323x98x115 323x104x118 323x98x115
Weight (kg) 1.4 1.5 1.7 1.45
THERMAL IMAGING
#TI-PROM
FLIR Tau 2
Hand held and rifle mounted
Model P2 640-30
P3 640-30
P5 336-60
Magnification (NTSC/PAL) 1.5x/1.8x 2.7x/3.2x 5.0x/6.0x
Field of view X/Y (°) 14.8/11.8 4.3/3.3 4.3/3.3
Dimensions (mm) 255x70x70 275x70x75 275x70x75
Weight (kg) 0.55 0.65 0.65
LASER RANGE FINDERS.
Models #SS & #SM – Mountable LRF
The #SS and #SM represent the next generation laser rangefinders. Both of these devices are mountable LRFs that can be bore-sighted to any optical system. These powerful devices instantly add long range-finding capability in a compact, lightweight package. Used in tandem with an AndroidTM-based application that runs on smartphones and tablets, the #SS and #SM provide real-time distance, azimuth, inclination and GPS target data, and allow for real-time mapping and friendly force communication. With NATO-standard target ranges of 2,000m and 3,000m respectively, the models allow for simplified down range target data acquisition. Specifications: Range finder Laser safety Class 1, eye-safe Wavelength (nm) 905 1550 Measuring range, (m)* 10 - 2,000 10 - 3,000 Distance measuring accuracy (m) ±1 Azimuth measuring range (°) 360 Azimuth measuring accuracy (°) ±1 Inclination measuring range (°) ±60 Inclination measuring accuracy (°) ±0.5 First/Last target logic Yes Gating capability Yes Interface USB Visible Laser Laser safety Class 3R Wavelength (nm) 635±10 Optical Output Power (mW) <5 Display Integrated display OLED Display colour Red Mechanics, Electronics & Environmental Dimensions without mount (mm) 115x76.3x52 Dimensions with mount (mm) 115x76.3x74 Weight without batteries or mount (g) 325 Weight with mount (g) 443 Weapon mountable MIL-STD-1913 Power Supply 2x CR2 Battery life (# of measurements) 3,500 Operating temperature range (°C) -30 to +50 Storage temperature range (°C) -35 to +60 Waterproofing MIL-STD-810G *2.3m x 2.3m NATO standard target
Models Spotter LRF Pro.
The SPOTTER LRF and SPOTTER LRF PRO are a combined spotting scope/laser rangefinder systems. They make it faster, easier and more accurate than ever before to acquire range, inclination and azimuth data on long-distance targets. Both models are built to MIL-STD-810G standards and are fully ruggedized to handle real-world military deployment. With 15-45x variable magnification, fully multi-coated optics, an etched mil-dot reticle, USB output, and LED display, the SPOTTER LRF and SPOTTER LRF PRO are among the most versatile optics you can bring with you to the field. Both are compatible with an AndroidTM-based application and other peripheral devices. Specifications: Optics Magnification (x) 15 - 45 Objective lens (mm) 60 Exit pupil diameter (mm) 4.17 - 1.34 Eye relief (mm) 25-26 Field of view (°) 3.4 (15x) - 1.2 (45x) Axial resolution (center), (arcsec) 3.0 Diopters adjustment range, dpt ±5 Laser Rangefinder Eye safety Class 1, eye-safe Wavelength (nm) 905 1550 1064 nm laser protection Optional Specifi ed measuring range (m)* 10 - 2,000 10 - 3,000 Display Aiming reticle type Etched reticle (MIL Dot) Display type Customized matrix OLED Display brightness control Manual (8 levels) Mechanics, Electronics & Environmental Dimensions (mm) 280x140x105 Weight with battery (g) 1,590 Operational temperature (°C) -35 to +55 Storage temperature (°C) -45 to +65 Waterproof 1m/30min Environmental conditions MIL-STD-810G Tripod mounting pad Yes 3-axis digital compass Yes Internal power supply 2x CR123 Lithium Battery life (# of measurements) 5,000 Nitrogen fi lled Yes Interface USB *2.3m x 2.3m NATO standard target
Ultra-long & medium to long laser rangefinder binoculars.
#LRB12K & LRB12KN
The LRB12 is built to outperform any handheld laser rangefinder binocular available today. Packing a virtually endless set of performance features into a MIL-SPEC form factor, the LRB12 can handle anything professional operators can throw its way. Features include a 12,000m (NATO target) measuring range, built-in digital magnetic compass, built-in GPS receiver and a crystal clear LED display. The LRB12K requires virtually no maintenance, and very little operational training. Through USB and RS-232 interfaces, the LRB12 can be operated remotely, have its stored data exported, and communicate with external GPS systems and ballistic computers. Specifications Optics Magnifi cation (x) 7 7 / 5 (night) Objective lens diameter (mm) 42 Field of view (°) 6 6 / 7 Eye relief (mm) 20 Diopter adjustment range ±5 Interpupillary distance (mm) 58 - 72 Rangefinder Eye safety Class 1, eye-safe Wavelength (nm) 1550 Measuring distance range (m)* 10 - 12,000 20 - 12,000 Distance measurement accuracy (m) ±1 Azimuth measurement accuracy (°) ±1 Inclination measurement accuracy (°) ±0.5 Speed detection Yes First/last target logic Yes Gating capability Yes Gating step (m) ≥100 Scan mode Yes Peripheral compatibility PLGR, Bal Comp,PC,BT, Android TM Distance between objects Yes Horizontal distance between objects Yes Azimuth difference between objects Yes Inclination difference between two objects Yes Height difference between objects Yes User GPS coordinates Yes Target GPS coordinates Yes
Night vision systems
#NVS14 Single Tube System
The NVS 14 series of night vision monoculars have been proven in deployments in conflict zones and by peacekeepers around the world. All models utilize advanced Gen 3 image intensifier tubes with minimum, exportable FOM >1600; have a manual gain control system; built-in IR illuminator; auto shutoff mechanism; and are fully MIL-SPEC. The newly-improved NVS 14-3AG and NVS 14-3AGBW models are now, at 265g, the lightest night vision monoculars utilizing full-sized IITs available today. Both systems are auto-gated while the NVS 14-3AGBW produces a black-&-white image rather than the traditional green. All models are MIL-STD-810G, but with the GCS upgrade can be made submersible to 20 meters for 1 hour. Each NVS 14 series device can be handheld, weapon-, head- or helmet-mounted. With optional lens attachments that turn either model into a 3x or 5x night vision sight, and a full range of additional accessories, the NVS 14 series is amongst the world’s most versatile night vision devices. Specification Generation 3 Photocathode material GaAs IIT resolution, minimum (lp/mm) 64 Signal to noise ratio, minimum 25 Field of merit (minimum) 1600 Auto-gating Yes No Black & white phosphor No Yes No Optics Magnifi cation (x) 1 Field of view (°) 40 Objective F# 1.2 1.17 Objective focal length (mm) 25 27.5 Focus range (m) 0.25 - ∞ Eye relief (mm) 25 Diopter adjustment range -6 to +5 Mechanics, Electronics & Environmental Dimensions (mm) 114x68x49 118x69x49 Weight without batteries (g) 287 300 Built-in IR illuminator Yes Battery type 1x AA or 1xCR123 Reverse Polarity Protection Yes IR Operation Indicator Yes Automatic Shut-off System Yes Upright Shut-off System Yes Battery life (hours) 40 Operating temperature range (°C) -50 to +55 Storage temperature range (°C) -50 to +70 Waterproofing, standard MIL-STD-810G Waterproofing, GCS Upgrade 20m, 30min
#NVS15 – Dual Tube System
The NVS 15 series of night vision goggles has been proven in deployments in conflict zones and by peacekeepers around the world. All models utilize two advanced Gen 3 image intensifier tubes, with minimum, exportable FOM >1600, have a manual gain control system, built-in IR illuminator, auto shutoff mechanism and are fully MIL-SPEC. The newly-improved NVS 15-3AG and NVS 15-3AGBW are now the lightest dual tube goggles available today. Both systems are auto-gated while the NVS 15-3AGBW produces a black-&-white image rather than the traditional green. The NVS 15 series provides users with full depth perception, and is ideal for vehicle operation and any other dark environment task requiring acute situational awareness. The modular design of the NVS 15 allows for the detachment of the left or right eye device, while the proprietary bridge mount provides for inter-pupillary and other fine adjustments. All models are MIL-STD-810G, but with the GCS upgrade can be made submersible to 20 meters for 1 hour. Each monocular module in the NVS 15 can be handheld, weapon-, head- or helmet mounted. With optional lens attachments that convert the NVS 15 into 3x or 5x binoculars, and a full range of additional accessories, the NVS 15 series is among the world’s most versatile night vision devices. Specifications Generation 3 Photocathode material GaAs IIT resolution, minimum (lp/mm) 64 Signal to noise ratio, minimum 25 Auto-gating Yes No Black & white phosphor No Yes No Optics Magnifi cation (x) 1 (3x option available) Field of view (°) 40 Objective F# 1.2 1.17 Objective focal length (mm) 25 27.5 Focus range (m) 0.25 - ∞ Eye relief (mm) 25 Diopter adjustment range -6 to +5 Mechanics, Electronics & Environmental Dimensions (mm) 114x150x66 118x150x66 Weight without batteries (g) 676 725 Inter-pupillary distance (mm) 52 - 74 Built-in IR illuminator Yes Battery type 2x AA or 2xCR123 Battery life (hours) 40 Start-up time (seconds) <2 Operating temperature range (°C) -50 to +55 Storage temperature range (°C) -50 to +70 Humidity up to 95% non-condensing Waterproofing, standard MIL-STD-810G Waterproofing, GCS update 20m, 30min
#NVS27 - #NVS27M – Night Vision Clip on attachments
The NVS 27 is the most advanced night vision clip-on series to date, and represents a significant improvement on other clip-on systems currently available. This high-resolution unit is designed to mount in front of virtually any daytime riflescope. It differs from the competition in many ways, but primarily in its compatibility with day sight magnifications between 1x and 20x. As military and police shooters continue to use higher-magnification day sights, this compatibility range provides a significant advantage in the field, enabling the use of most, if not all, of a given day sight’s magnification capability. The NVS 27 series was designed by shooters, and its extra-wide field of view, manual gain control system, and extended target detection range make it the world’s most complete night vision clip-on system. Specifications Generation 3 Photocathode material GaAs IIT resolution, minimum (lp/mm) 64 Figure of merit, minimum 1600 Signal to noise ratio, minimum 25 Mean time to failure (hours) 10,000 Photocathode sensitivity, minimum, (μA/lm) 1800 Auto-gating Yes Auto-gating with black & white phosphor Optional Automatic brightness control Yes Optics Magnification (x) 1 Field of view (°) 13 Objective F# 1.0 1.5 Objective focal length (mm) 78 Focus range (m) 10 to ∞ Magnifi cation compatibility, recommended (x) 1 - 20 Mechanics, Electronics & Environmental Dimensions (mm) 240x97x107 220x87x90 Weight without batteries (g) 1,400 (with QR mount) 970 (with QR mount) Mount system QR Mount Height from the rail to the optical axis (mm) 42 30.5 Height from the rail to the optical axis (inches) 1.65 1.20 IR illuminator Optional Battery type 1x AA or 1x CR123 Battery life (hours) 50 Low battery indicator Yes Operating temperature range (°C) -55 to +65 Storage temperature range (°C) -60 to +70 Waterproofing 10m/1h MIL-STD-810G compliant Yes Bore-sight retention Permanent Bore-sight adjustment Not required
#DN493 – Night Vision Rifle Scope
The DN 493 is a next-generation night vision riflescope. This 6x magnification riflescope features a manual gain control adjustment; an advanced Gen 3 image intensifier tube; a MIL-DOT, LEDlit reticle with adjustable brightness; a Picatinny rail mount; removable infrared illuminator; and tactile wind-age and elevation adjustments. This scope is easy to service and maintain, and presents one of the lowest lifetime costs of ownership among riflescopes in its class. The DN 493_6x is battle-hardened and ready for deployment in combat or peacekeeping, as well as in public and private infrastructure security. Specifications Generation 3 Photocathode material GaAS IIT resolution, minimum (lp/mm) 64 Signal to noise ratio, minimum 25 Auto-gating Yes Auto-gating with black & white phosphor AGBW Optics Magnifi cation (x) 6 Field of view (°) 6.3 Objective F# 2.0 Objective focal length (mm) 165 Focus range (m) 20 to ∞ Eye relief (mm) 50 Diopter adjustment range -3 to +4 Mechanics, Electronics & Environmental Dimensions (mm) 300x98x90 Weight with mount (g) 1,400 Standard mount system MIL-STD-1913 Built-in IR illuminator Yes (removable) Battery type 2x AA Battery life without IR (hours) 60 Operating temperature range (°C) -40 to +50 Storage temperature range (°C) -45 to +55 Waterproofi ng MIL-STD-810G Ballistics Reticle pattern Mil-Dot Lit reticle Yes Adjustable reticle brightness Yes Wind-age adjustment step (MOA) 0.34 Elevation adjustment step (MOA) 0.34
THERMAL IMAGING SYSTEMS
#TVS-11M Thermal monocular
The TVS-11M tactical thermal monocular is the next generation of a tried and tested thermal monocular series. As a lightweight and compact handheld, helmet- or weapon-mounted device, the TVS 11M is well-suited to a variety of tactical, law enforcement, search-and-rescue and industrial applications. The TVS 11M utilizes passive infrared sensing technology allowing users to detect extremely small differences in the temperature of objects, people and other heat sources within the field of view. Unlike traditional night vision devices, the TVS 11M can be operated 24 hours a day; in daytime and at night (even in the total darkness of an enclosed space); has the ability to see through smoke, fog and other obscurants; and boasts a variety of colour and contrast settings and digital zoom capability. The TVS 11M can also be connected to external display devices allowing other parties to view the observed image in real time.
Specification
Resolution (pixels) 384x288 Operating wavelength (μ) 8 - 14 Sensitivity (mK @F1.0) <70 Video output PAL DRI range (m) Human 576/142/71 Vehicle 1,530/385/190 Multiple color options Yes Optics Objective focal length (mm) 17 Field of view (°) 22x16.5 Eye relief (mm) 25 Dioptric correction ±5 Zoom 2x, 4x Mechanics, Electronics & Environmental Dimensions (mm) 145x72x50 Weight without batteries (g) 375 Battery type 3.7V/1800mAh Li-on or 2xCR123 Lithium batteries Battery life (hours) 4 Operating Temperature range (°C) -35 to +55 Operating Temperature range (°C) -45 to +70 Waterproofing MIL-STD-810G Optional weapon-mounting systems S Mount, QR Mount Weapon compatibility Assault rifles, RPG - Aiming reticle Yes
#Sentinel LRF –Thermal Imaging Bioculars
The SENTINEL and SENTINEL LRF are advanced thermal imaging binoculars with a wide variety of tactical, law enforcement, border security and special force applications. The SENTINEL and SENTINEL LRF utilize a high-resolution uncooled thermal sensor to perceive differences in the thermal signature of objects within the field of view, and a large-diameter Germanium lens to extend their observation range. The SENTINEL and SENTINEL LRF can detect objects at remote distances 24 hours a day, through smoke, fog or camoufl age, and do not produce any audible sounds while in operation. The SENTINEL contains the same detection features as the SENTINEL LRF without the laser rangefinder capability. Specifications Detection, recognition, identification range to human with 640 version Resolution (pixels) 384x288 640x480 Pixel size (PI) 17 Operating wavelength (μ) 7 - 14 Sensitivity (mK @F1.0) <70 <55 Video output PAL DRI range (m)* 2,500/625/313 Optics Objective focal length (mm) 75 Field of view (°) 5.0x3.7 8.3x6.2 Eye relief (mm) 25 Dioptric correction -6 to +2 Zoom 2x, 4x Internal recording module Optional Mechanics, Electronics & Environmental Dimensions (mm) 208x146x90 210x146x89 Weight without batteries (g) 1,030 1,307 Battery type 6x AA Battery life (hours) 6 Operating Temperature (°C) -40 to +50 Waterproofing MIL-STD-810G Laser Rangefinder Laser Wavelength (nm) - 1,550 Measurement distance to 2.3x2.3m NATO (m) - 3,000 Distance measuring accuracy (m) - ±1 Device measurement capability (m) - 5,000 Azimuth measuring range (°) - 360 Elevation measuring range (°) - ±60
#TVC60 – Thermal Clip on Sight
The TVC 60 is a clip-on thermal weapon sight designed to be used in conjunction with a magnified day optic. When in use, the shooter relies on the zeroing of the day optic and does not need to re-zero when attaching or detaching the unit. The TVC 60 utilizes an uncooled thermal sensor that allows for the detection of camouflaged targets at long range. Equipped with a video output, the image captured by the TVC 60 can be viewed in real time by friendly forces, recorded and transmitted. Multiple image polarities and colour schemes, adjustable contrast and variable digital magnification all contribute to making the TVC 60 a valuable addition to any sniper’s kit. Specification Resolution (pixels) 640x480 Operating wavelength (μ) 8 - 14 Display AMOLED 800x600 Sensitivity (mK @F1.0) <55 Video Output PAL DRI Range(m)* 1330/330/170 Optics Objective focal length (mm) 40 Objective F number 1.0 Field of view (°) 15.5x11.7 Focus range 10m - ∞ Eye Relief 50mm Mechanics, Electronics & Environmental Dimensions with mount (mm) 172x91x89 Weight without mount and batteries (g) 780 Battery type 4 x AA Battery life (hours) 4 Operating Temperature (°C) -40 to +55 Waterproofing MIL-STD-810G Weapon mounting system MIL-STD-1913 Weapon compatibility Assault rifles, Sniper rifles
#TVS13M – Thermal Imaging Riflescopes
The TVS 13M thermal riflescope series is designed to act as a force multiplier in the most demanding situations faced by border patrol, law enforcement, tactical team snipers and special operations forces. The TVS 13M functions effectively in CQB, medium- and long-range target-engagement applications. Advanced in-built ballistics software allows for accurate fi ring on virtually any weapon platform, while a video output port and internal storage capability enable the capture of video and still images. With its extended range capability the TVS 13M (75) is ideal for long-range applications. Specifications Sensor TVS 13M TVS 13M (640) Resolution (pixels) 384x288 640x480 Pixel size (μ) 17 Operating wavelength (μ) 8 - 14 Full Frame Rates, PAL (Hz) 50 Display AMOLED 800x600 Sensitivity (mK @F1.0) <70 <55 Video Output PAL DRI range (m)* 1,800/450/225 Optics Objective focal length (mm) 54 Field of view (°) 7.0x5.2 11.5x8.6 Eye relief (mm) 30 Dioptric correction -6 to +2 Zoom 2x, 4x Mechanics, Electronics & Environmental Dimensions (mm) 270x75x102** Weight without batteries (g) 1194 (with mount)** Battery type 6x AA or battery cassette Battery life (hours) 8 Operating Temperature (°C) -40 to +50 Waterproofing MIL-STD-810G Shock resistance (G) 300 Ballistics Pre-programmed reticles 8 Programmable ballistic profiles 4 Automatic reticle colour inversion Yes Proximity sensor Yes Maximum Detection/Recognition/Identification to human-sized target
#TVS13M (75) – Thermal Imaging Riflescopes
The TVS 13M comes standard with a Picatinny quick release mount and can also be used as a hand-held observation tool. Unlike traditional night vision devices, the TVS 13M operates 24 hours a day without any degradation in performance when used in daylight, smoke or fog, and it can also penetrate camouflage. With a variety of other features including image-polarity selection, sepia, rainbow and other colour options, a proximity sensor and full MIL-SPEC design, the TVS 13M is the right choice for tactical applications in any environment. All TVS 13M models are now available with inclinometer and stability sensor. Specification
Sensor TVS 13M (75) TVS 13M (640-75) Resolution (pixels) 384x288 640x480 Pixel size (μ) 17 Operating wavelength (μ) 8 - 14 Full Frame Rates, PAL (Hz) 50 Display AMOLED 800x600 Sensitivity (mK @F1.0) <70 <55 Video Output PAL DRI range (m)* 2,500/625/313 Optics Objective focal length (mm) 75 Field of view (°) 5.0x3.7 8.3x6.2 Eye relief (mm) 30 Dioptric correction -6 to +2 Zoom 2x, 4x Mechanics, Electronics & Environmental Dimensions (mm) 285x90x112** Weight without batteries (g) 1,320 (with mount)** Battery type 6x AA or battery cassette Battery life (hours) 8 Operating Temperature (°C) -40 to +50 Waterproofing MIL-STD-810G Shock resistance (G) 500 Ballistics Pre-reprogrammed reticles 8 Programmable ballistic profiles 4 Automatic reticle colour inversion Yes
TACTICAL OPTICS
#LAS1000 – Sniper Detection System
The LAS 1000 detects snipers and other forward observers before they fire a shot. This system is ideal for border and perimeter security as well as VIP protection details. While most sniper detection systems are acoustic and help operators respond to a threat after it has already inflicted damage, the LAS 1000 functions on optical principles and can therefore pinpoint the location of a threat before it has a chance to act. Utilizing an eye-safe laser scanner, the LAS 1000 detects lenses and reflectors in its line of site even if these objects are covered behind bushes, windows or windshields. The detector can be handheld or mounted on a tripod and when an optical reflector of any kind is detected, its position is marked. For added situational awareness, an audio signal can also be set to automatically activate upon the detection of a threat. The LAS 1000 now has in-built GPS to determine the precise coordinates of detected threats. Specification Optics LAS 1000 Objective lens focal distance (mm) 50 / F2.0 CCD resolution (pixels) CCD, 752x582 Minimal illumination (lux) 0.005 Video output refresh rate (Hz) 50 Field of view (°) 5.2x4 Magnification 7x Display resolution (pixels) 800 x 600 OLED SVGA Diopter adjustment of the eyepiece ± 4 Detection parameters Maximum detection range, 4x30 weapon sight (m) 1,000 Minimum detection distance of the optical objects (m) 70 Distance measuring accuracy (m) 10 Angular size of the detection zone (° or mils) 1.8° / 32 mils (V) x 0.03° / 0.5 mils (H) Maximum horizontal scanning speed (°/sec) 30 Compass Measured azimuth range (°) 360 Accuracy ±2.0° RMS at level Inclinometer Measured elevation range (°) ±90 Accuracy ±1.0° RMS (within ±80°)
#NC1x12 // HDS3AA – Holographic Sights
The NC 1x21 and HDS 3AA red dot sights were designed and built for tactical law enforcement and military applications. Both sights allow rapid, accurate target acquisition for close-quarters battle (CQB) and are built with rugged, durable single-piece frames. The compact NC 1x21 is ideal for short-range CQB engagements. It has a variety of brightness settings and is fully compatible with night vision devices. Weighing in at just 132 grams, the NC 1x21 is an extremely lightweight upgrade to any weapon system. The tried-and-tested HDS 3AA is better suited to longer-range engagements than the NC 1x21. It’s multiple brightness settings and precise step adjustments make it accurate in conjunction with a wide variety of assault rifles. Fully compatible with night vision devices, the HDS 3AA can also be used with a 3x or 5x magnification flip-to-side add-on lens, allowing for extended viewing and engagement capability. Specification Optics NC 1x21 HDS 3AA Magnification (x) 1 1 (3 or 5 with add-on) Objective lens diameter (mm) 21 26 Parallax free Yes Eye relief (mm) Unlimited Diopter adjustment range - ±3 (with add-on) Ballistic Specifications Reticle pattern Red Dot Red dot size (MoA) 4 Lit reticle Yes Lit reticle colour Red Adjustable reticle brightness 11 Settings Windage adjustment step (MoA) 1.0 0.5 Elevation adjustment step (MoA) 1.0 0.5 Night vision compatible Yes Mechanics, Electronics & Environmental Housing material type Extruded High Strength Aluminum Co-witness with iron sights Yes - Dimensions (mm) 79x53x49 128x55x70 Weight (g) 145 332 Shock resistance (G) 500 500 Battery type 1x CR2032 1x AA Battery life, minimum (hours) 160 800 Operating temperature range (°C) -40 to +50 -40 to +60 Storage temperature range (°C) -40 to +50 -55 to +75 Humidity (%) 95 Waterproofing Standard 1m/ 30min Optional 10m/ 2h 10m / 1h Mounting MIL-STD-1913
#NC4x32 // NC6x50 – Magnified Day Sights
The NC 4x32 and NC 6x50 are weapon mounted tactical day optics. These devices feature 4x and 6x fixed-magnification respectively and are therefore ideal for short- to medium-range target acquisition. Both units feature an LED-lit Mil-Dot ranging reticle with multiple green and red brightness settings. These units can be used in conjunction with night vision devices and are compatible with virtually all assault rifles. The NC 4x32 and NC 6x50 are highly precise, ruggedized sights and have been battletested in a wide variety of environmental conditions. These are the right choice for military and police professionals requiring a fixed-magnification weapon sight for CQB and medium-range assault rifle target engagements. The optional backup red dot sight (NC BURD) enables rapid target acquisition even at close range. Specification NC 6x50 NC 4x32 Optics NC 4x32 NC 6x50 NC BURD Maximum magnification (x) 4 6 Objective lens diameter (mm) 32 50 Eye relief (mm) 72 Exit Pupil Diameter (mm) 8 - Field of view (°) 4.5 3 Diopter adjustment range ±3 Anti-reflective lenses Yes Ballistic Specifications Reticle pattern Rangefinding reticle Lit reticle Yes Lit reticle colour Red / Green Adjustable reticle brightness Yes Windage adjustment step (MoA) 0.33 0.25 Elevation adjustment step (MoA) 0.33 0.25 Mechanics, Electronics & Environmental Dimensions (mm) 139x57x79 168x75x81 Weight (g) 467 583 Shock resistance (G) 500 Battery type 1x CR2032 Battery life, minimum (hours) 160 Operating temperature range (°C) -40 to +50 Storage temperature range (°C) -40 to +50 Humidity (%) 95 Waterproofing Standard 1m/ 30min - Optional 10m/ 2h Night vision / thermal compatible Yes Mount type MIL-STD-1913
#S-ED // #S-M Spotter Series
The spotting scope series has taken a big leap forward with the introduction of the SPOTTER LRF and SPOTTER LRF PRO the first of their kind combined spotting scope/laser rangefinder systems. They make it faster, easier and more accurate than ever before to acquire range, inclination and azimuth data on long-range targets. Both models are built to MIL-STD-810G standards and are fully ruggedized to handle real-world military deployment. With 15-45x variable magnification, fully multi-coated optics, an etched mil-dot OLED reticle, USB output and LED display, the SPOTTER LRF and SPOTTER LRF PRO are among the most versatile optics you can bring with you to the fi eld. Both are compatible with our AndroidTM - based application and other peripheral devices. The Spotter ED and Spotter M continue to provide world-class optical quality in fully ruggedized, portable form. The Spotter M weighs in at under 300g. Specification Optics SPOTTER ED SPOTTER M Magnification (x) 20 - 60 8 Objective lens diameter (mm) 85 42 Focus range (m) 7 - ∞ 3 - ∞ Exit pupil (mm) 4.25 - 1.4 5.25 Eye relief, (mm) 20 - 18 17.5 Field of view @ 1,000yd min mag/ max mag(feet) 105 / 53 1008.0 Field of view @ 1,000m (m) 35.0 / 17.7 336 Diopter adjustment range ±5 ±3 Twilight factor 41.2 / 71.4 (min mag / max mag) 18.3 Relative brightness 18 / 2 (min mag / max mag) 27.6 Reticle type Mil-Dot M22 Mechanics & Environmental Weight (g) 1,300 336 Dimensions (mm) 432x105x174 142x60x57 Eyepiece type Straight Operating temperature range (°C) -40 to +60 -30 to +60 Storage temperature range (°C) -40 to +60 -30 to +60 Nitrogen purged Yes Waterproofing IP67
#Laser Aimers – LAM Series
The LAM series of weapon mounted laser aimers and illuminators are in service with military and police organizations worldwide. These military-grade devices utilize powerful visible and infrared lasers to provide accurate aiming and bright night vision illumination from any weapon system or optical platform. The LAM 3G is a three-channel laser featuring a green visible laser aimer, an IR laser aimer and an IR illuminator. It has solid audible/tactile step adjustment mechanisms that are easy to use and hold their positions after thousands of discharges. With a low power training mode and a high power in-field mode, this device can be safely utilized among friendly forces and quickly powered up for real-world target engagements. The LAM 10D is a single channel IR laser aimer designed to reach out to 1,000m. For night operations, this simple, extremely lightweight device is the right choice for professional operators demanding unrivalled performance and reliability.
Specification
Eye safety IIIb - Distance, day, low/high (m) 150/500 - Beam divergence, FWHM (mrad) 0.5 - Spot size @ 100m (mm) 50 - Wavelength (nm) 532 ±10 - Laser colour Green - Infrared Laser Aimer Eye safety IIIb Distance, low/high (m) 200/2,000 1,000 Beam divergence, FWHM (mrad) 0.5 0.3 Spot size @ 100m (mm) 50 30 Ballistics Windage adjustment step (mrad) 0.5 ; Windage adjustment range (mrad) 40 ±20 Elevation adjustment step (mrad) 0.5; Elevation adjustment range (mrad) 40 ±20 Retention after 1,000 shots (mrad) 1 Mechanics, Electronics & Environmental Dimensions (mm) 100x80x40 114x45x32 Weight without batteries (g) 278 150 Shock resistance (G) 300 Quick release Yes Battery type CR 123; Battery life, high / low (hours) 8 / 16 10 Operating temperature range (°C) -10 to +50 -40 to +60 Storage temperature range (°C) -40 to +60 Waterproofing IP67 45m/1h
#NCFL – Tactical Flashlights
NCFL Series is comprised of compact, mountable illumination/aiming systems that can be utilized on a wide variety of weapons including handguns and assault rifles. Each model in this series has a distinctly unique feature set, ensuring there is an NCFL unit perfectly suited to every application. NCFL 10: The only compact illuminator/aimer to feature a built-in digital camera that allows continuous video recording of armed encounters. This model also has a visible light illuminator and visible laser aimer. NCFL 9GI & NCFL 9RI: These models both have ultra-bright visible light illuminators, infrared aiming lasers for use with night vision devices, and visible laser aimers (green in the GI variant and red in the RI variant). NCFL 9: This model has an ultra-bright visible light illuminator and an infrared laser for use with night vision devices. Specification Visible Laser Built-In Digital Camera High Power LED Flashlight NCFL 9 NCFL 9 RI NCFL 9 GI Modes: OFF, Flashlight, Infrared Aimer Infrared Aimer, Flashlight+Red//Green Laser Flashlight Bulb C4 LED Light output (lumens) >180 >225 Visible laser distance (m) - 75 IR distance (m) 250 Visible laser / IR laser 830±10nm, <15mW 650±10nm at ≤5mW / 835±10nm at <10mW 530±10nm at ≤5mW / 835±10nm at <10mW Laser beam size (mm @ 10m) <Ø10 Mechanics, Electronics & Environmental Mounting requirements MIL-STD-1913 Picatinny Mount Battery 2 x CR 123 Lithium Hours of operation (hours) 40 (IR mode) 1.7 (Flashlight) ≥5 Operating temperature range (°C) -20 to +50 Storage temperature range (°C) -40 to +60 Dimensions (mm) 87x41x50 80x55x51 Weight w/o batteries (g) 106 115 Waterproof IP67 / 1m/30min Modes: Camera + Aimer, Camera + LED, Material 6061 Aviation Grade Aluminum and high strength Zytel polymer Colour Hard anodizing, matte black Flashlight bulb CREE Q5 Light output (lumens) 120 Flashlight modes Continuous, strobe Visible Laser Wavelength (nm) 650 Output power (mW) <5 Visible laser distance day, max (m) 50Spot size @ 10m 8 mm Camera: Image resolution 1920 x 1080 Picture element (megapixels) 2; Frames per second during recording 30 Field of view (°) 68, Card format Micro SD Storage capacity (MB/min) 110 Hours per 16G memory card 2.5 Maximum capacity (GB) up to 32
#IRIL 1000M – High Powered visible and infrared aimer//illumuinator
The IRIL 1000M long-range infrared aimer and illuminator features a high powered visible laser aiming channel. This device is designed to reach out to extreme distances to aid in target identification and engagement from ground and air-based platforms. Equipped with a Picatinny quick release mount, the IRIL series of illuminators can be mounted on virtually any rifle platform, or crew-served weapon system. The IRIL 1000M has 5 in-built laser patterns to select from to aid in laser identification. The IRIL 1000M has an adjustable beam divergence between 1 and 20 mrad, allowing for immediate transition between wide-area spot scene illuminator and accurate IR laser aimer. It’s extremely long maximum range provides significant optical advantage to professional night operators in all environmental conditions. Specification Visible Laser Aimer IRIL 1000M Eye safety 3R Distance, high (m) 500 (night) Beam divergence, FWHM (mrad) 1 Spot size @ 100m (cm) 100 Wavelength (nm) 532 ±10 Infrared laser Illuminator Eye safety 4 Distance, high (m) 30,000 Beam divergence, FWHM (mrad) 2 - 60 Spot size @ 100m, min divergence / max divergence (mm) 200-6000 Wavelength (nm) 810 ±10 Ballistics Windage adjustment step (MOA) 1.6 Windage adjustment range (MOA) ±120 Elevation adjustment step (MOA) 1.6 Elevation adjustment range (MOA) ±120 Retention after 1,000 shots (MOA) 2 Mechanics, Electronics & Environmental Dimensions (mm) 154x65x57 Weight without batteries (g) 425 Shock resistance (G) 500 Quick release Yes Battery type 1x 18650 Lithium Battery life, high / low (hours) 2 / 4 Operating temperature range (°C) -20 to +50 (IR) -10 to +50 (Green) Storage temperature range (°C) -40 to +60 Waterproofing IP67
#AN Series Tactical Day Binoculars
The AN series of binoculars incorporates Porro prisms and multi-coated lenses, delivering impressive light transmission and resolution for brilliantly clear vision. Non-slip UV-resistant rubber armouring makes these binoculars comfortable to operate even in cold weather. They are waterproof and shockproof, feature a military reticle and compass (AN 7x50 MC only) and adhere to the latest military standards while remaining light and compact. Specification Optics AN 8x30M22 AN 7x50MC AN 7x50M22 AN 10x50M22 AN 20x80M22 Magnification (x) 8 7 7 10 20 Objective lens diameter (mm) 30 50 50 50 80 Focus range (m) 3 - ∞ 5 - ∞ 5 - ∞ 6 - ∞ 18 - ∞ Exit pupil (mm) 4 7 5 4 Eye relief (mm) 17 23 23 19 16 Field of view - Angular (°) 8 7.2 8 7 3.3 Apparent fi eld of view (°) 8.0 7.5 8.0 7.0 66 Field of view @ 1,000yd (feet) 419 396 419 367 173 Field of view @ 1,000m (metres) 139.7 132 139.7 122.3 57.7 Diopter adjustment range ±5 ±10 Twilight factor 16 19 19 22 40 Relative brightness 14 51 51 25 16 Transmission (%) 90 95 Resolution (Center) (inches) - - - - ≤3 Lens & Prism coating FMC Prism Type BAK-4 Prism Glass Material BAK-4 Reticle type M22 Mechanics & Environmental AN 8x30M22 AN 7x50MC AN 7x50M22 AN 10x50M22 AN 20x80M22 Interpupillary distance (mm) 56-74 Weight (g) 595 1,046 1,363 1,309 2,498 Dimensions 110x160x54 152x190x83 195x195x75 180x190x73 298x230x95 Illuminated compass No Yes No Tripod mountable Yes Battery type na LR44 na Operating temperature range (°C) -30 to +60 -40 to +70 -40 to +80 Storage temperature range (°C) -45 to +75 -45 to +85 Nitrogen purged Yes Waterproofing MIL-STD-810G 6m / 30 min
#BGE 28x100ED – Ultra Long-range binocular
The BIG EYE 28x100ED is designed to meet the most demanding specifications and is capable of withstanding maritime weather. It is useful as a marine binocular, a border-guarding instrument, or for other applications where long-range viewing is required. The BIG EYE 28x100ED has massive objective lenses, BAK-6 prisms, and precision ground, multi-coated optics. Optical quality is extraordinary with true edge-to-edge image clarity. Oversized, individually-focusing ocular lenses are set at an angle for comfortable viewing, and have foldable eyecups. The mounted device swivels a full 360° horizontally and 135° vertically. The instrument is nitrogen-filled to prevent fogging. The BIG EYE 28x100ED is supplied with a hard case equipped with a lock. It can also be coupled with one or two NVS 14 series night vision monoculars for night operation. Specification Optics BIG EYE 28x100 ED Magnification (x) 28 Objective lens diameter (mm) 100 Focus range (m) 30 - ∞ Exit pupil (mm) 3.6 Eye relief (mm) 16 Apparent field of view (°) 70 Real field of view (°) 2.5 Field of view @ 1000m (m) 43.7 Inter-pupillary distance (mm) 53-76 Relative brightness 13 Diopter adjustment range -5 to +2 Lens coating FMC, ED Glass Mechanics & Environmental Weight, g 6,800 Dimensions 553x270x172 Tripod mountable Yes Operating temperature range (°C) -35 to +50 Storage temperature range (°C) -50 to +60 Humidity (%) 90 Nitrogen purged Yes Waterproofing MIL-STD-810G
#SIB 16x40WP – Image Stabilising Binocular
The SIB 16x40WP gyrostabilized binocular incorporates gyroscopic image stabilization technology that enables the user to observe distant objects from moving platforms without image resolution degradation caused by mechanical vibration or natural hand tremor. Combining fully-coated optics with a high-speed gyrostabilizing system, the SIB 16X40WP binocular is the ultimate instrument for long-range observation, tracking and surveillance. Specification Optics SIB 16x40WP Magnification (x) 16 Objective lens diameter (mm) 40 Focus range (m) 30 - ∞ Exit pupil (mm) 2.5 Eye relief (mm) 15 Field of view (°) 3.4 Field of view @ 1,000yd (feet) 178 Diopter adjustment range ±5 Transmission (%) 55 Lens coating FMC Reticle type None Mechanics, Electronics & Environmental Inter-pupillary distance (mm) 58 - 72 Weight (g) 2,200 Dimensions (mm) 230x190x120 Illuminated compass No Tripod mountable Yes Battery type 6x AA Battery life (hours) 6 Operating temperature range (°C) -30 to +55 Storage temperature range (°C) -50 to +70 Humidity (%) 98 ; Waterproofing IP66 Stabilization Specifications Stabilization technology Gyro; Angular velocity of panning (°/sec) 0 - 6
SECURITY SCANNERS
Vehicle scanners, luggage scanners/airport and bomb scanners available
Portable walk through metal detector Model NUC-700 Portable design, small size and easy move. 220V voltage.
Door panel walk through metal detector Model: NUC-600 Traditional fixed design Cannot fold, more stable and durable. 3.7-inch LCD screen, 18 zones. Remoter controller. Very popular for Police office, government office use.
Luggage scanner – use in airports, border control and military access points Liquid scanners Bomb detection Weapons detection Contraband detection
Vehicle scanners Used by militaries and border control Bomb detection Person detection Contraband detection
Handheld scanners Metal detectors
CONTACT DETAILS
MILITARY PRODUCTS (T/A CE DISTRIBUTORS)
UNIT 27, CONSTANTIABERG BUSINESS PARK
PRINCESSVLEI ROAD
DIEP RIVER, CAPE TOWN
SOUTH AFRICA
+27 21 7154335
EMAIL: [email protected]
Website: www.militaryproducts.co.za