precision tool sale summer 2018 - mitutoyo.ca qrt flyer... · • the dial indicator is fully...

Distributed By:

FOLLOW US . LIKE US

PRECISION TOOL SALE

SUMMER 2018

Effective JULY 2nd - SEPT 29th 2018 While quantities last. Some items may not be exactly as shown.

2 Micrometers

Range Order No. Graduation Promo Calibration0-6”

6-12” .001”

104-137104-138

$ 425.96$ 717.25

$ 293.00$ 264.00$ 290.00$ 854.68104-20112-18”

Range Order No. Graduation Promo Calibration0-1”1-2”

.0001”103-135103-136

$ 117.76$ 138.92

$ 39.00

Range Order No. Graduation Promo Calibration

0-1” .0001”115-153 (S-F)115-253 (S-F)

$ 148.12$ 161.00

$ 39.00

Range Graduation Promo0-1” .0001”117-107 $ 230.00

Order No. Calibration$ 39.00

MECHANICAL MICROMETER - SERIES 103Features:• Hammerstone, baked-enamel-finished frame• Friction thimble for exact repetitive readings• With a standard bar except for 0-1” model

MECHANICAL INTERCHANGEABLE ANVILS MICROMETER - SERIES 104Features:• Wide measuring range with interchangeable anvils• Ratchet stop for constant force• Supplied with zero-setting standards for each range• Supplied in fitted wooden case

MECHANICAL SPHERICAL FACE MICROMETER - SERIES 115Features:• With Ratchet stop for constant force• Supplied in fitted plastic case

MECHANICAL UNIMIKE MICROMETER - SERIES 117Features:• With special Disk Anvils - The Unimike is used as a Height

Micrometer • Supplied in fitted plastic case

* .0001 reading is obtain with vernier

Micrometers 3SUMMER 2018EFFECTIVE JULY 2ND - SEPTEMBER 29TH

Range Order No. Remarks Promo Calibration1-2”2-8”

with 2 rods141-102141-208

$ 175.72$ 189.52

$ 76.00with 3 rods $ 89.00

Range Order No. Resolution Promo Calibration

0-1”/ 0-25.4mm293-330-30 $ 262.20

$ 204.25

$ 39.00

.00005”/ 0.001mm 1-2”/ 25.4-50.8mm

.00005”/ 0.001mm

2-3”/ 50.8- 76.2mm4-5”/ 101.6-127mm5-6”/ 127-152.4mm

6-7”/ 152.4-177.8mm

293-340-30293-341-30293-342-30293-350-30293-351-30

293-352-30

$ 275.50$ 324.76$ 513.36$ 531.76

$ 542.80.0001”/ 0.001mm

$ 51.00

06AFM380A $ 211.60Waterproof with Data Switch

Cable Type Order No. Promo

06AFM380B06AFM380C06AFM380F

$ 218.04Straight type

With Data Switch

Features:• Allows you to connect any Mitutoyo gauge with SPC output

directly to your PC or Laptop with USB 2.0

DIGIMATIC MICROMETER - SERIES 293Features:• Measurement data output function is available with a water-

resistance connection cable• Auto Power ON/OFF function• With zero-setting except for 0-1”/0-25mm Model• Supplied in fitted case

INSIDE MICROMETER - INTERCHANGEABLE ROD TYPEFeatures:• Wide range of ID measurements with interchangeable rods• Each interchangeable rod is marked with its measuring range

Holder is furnished with this set, making it possible to check radii in confined or hard to reach locations

• Both micrometer head and furnished rods are satin-chrome finished throughout

• Supplied in fitted plastic case - over 1000mm/ 40” supplied in a wooden case

USB INPUT TOOL

is the universal term for Mitutoyo Digimatic Small Tool Instruments that are free from measuring error and physical deterioration due to the routine exposure to water, cutting oil or coolant.

This high performance is achieved by using encoders that are inherently immune to contamination, where exposure is inevitable, combined with comprehensive sealing techniques and extremely oil resistant materials to guarantee a long working life under normal operating conditions.

4 Indicators

Promo

Range Order No. Graduation Dial Calibration Promo.2” .001”1166T $ 156.40 $ 39.000-50

Range Order No. Graduation Dial Promo.25” .001”1410S-10 $ 124.20 $ 39.000-100

Calibration

Range Order No. Graduation Dial Promo10mm 0.01mm2046S-01 $ 100.28 $ 39.000-100

Calibration

Resolution Promo

.5”/ 12.7mm .00005”/.0001”/.0005”0.001/0.01MM Selectable

543-302 $ 491.28 $ 39.00Range Order No. Calibration

Range Order No. Graduation Dial Promo

$ 39.00

Calibration2414S2415S2416S

2416S-102417S

2424S-19

$ 117.80$ 122.36$ 119.70$ 134.90$ 135.85$ 241.30

.5”

.5”1”

1”1”2”

.001”

0-100

0-50-00-100

0-1000-50-00-100

Resolution Promo1”/ 25.4mm .0005”/0.01mm 575-123 $ 215.28 $ 39.00

Range Order No. Calibration

BACK - PLUNGER DIAL INDICATOR - SERIES 1Features:• Built with measuring spindles on

the back of the units.• This type of indicator offers the

same precision and durability as all other Mitutoyo dial indicators, and operates effectively with optional holding bars.

DIAL COMPACT INDICATORFeatures:• Jeweled bearing to ensure high

sensitivity and accuracy• Revolutionary stem-bush design

for trouble-free stem clamping

STANDARD DIAL INDICATOR - SERIES 2Features:• Unique shock-proof mechanism• Crystal hard coated for durability

and scratch resistance• #2424S-19 *StockProof &

Jeweled bearing type

STANDARD DIAL INDICATOR - SERIES 2Features:• Stem Dial - 3/8”, Yellow dial face• Standard 0.01mm graduation dial

gauges have an outer frame with an outside diameter of 57mm All types come with limit pins and an outer-frame clamp as standard.

• Series 2 dial indicators are Mitutoyo’s most popular and have the widest application.

#2056S-01used for visualization only

PEAK HOLD, DIGIMATIC INDICATOR - SERIES 543Features:• Key-lock and parameter-lock to prevent

accidental change• With analog bar for easy-to-read values• High speed sampling ratio of 50 times

ID-U DIGIMATIC INDICATORFeatures:• Large LCD and simple key operation• The origin is remembered even after

power-off• Flat back type only has no option for

backs.

Indicators 5SUMMER 2018EFFECTIVE JULY 2ND - SEPTEMBER 29TH

Resolution Promo

.5”/ 12.7mm $ 39.00

543-783543-783B543-792B543-793B

$ 202.35$ 202.35$ 303.60$ 313.50.001”

Range Order No. Calibration.0005”/ 0.01mm .0005”/ 0.01mm .00005”/ 0.001mm .0001”/ 0.001mm

Range Order No. Graduation Dial Promo.04” .001”513-518 $ 147.25 $ 39.000-20-0

Calibration

Graduation Promo0.4 - .74” With 2923SB-10 .0001” 511-206 $ 723.12Range Order No. Calibration

$ 89.00

Graduation Promo2.0-6.0” W/2922SB -.0005” 511-743 $ 435.16

$ 388.24


0.7-1.4” 511-7511.4-2.5” W/2923SB-10

.0001”

511-752 $ 442.52 $ 89.00$ 427.502.0-6.0” 511-753

0.7-6” 511-932 $ 1137.12

Type Promo7010SN $ 98.80

7011S-107011SN7033B

$ 110.40$ 111.15$ 227.05

Supports magné�que

Order No.

Universal Magne�c Stand

Magne�c Stands

POCKET TYPE INDICATORFeatures:• Jeweled bearing to ensure high

sensitivity and accuracy• Reversible measuring direction• Fully adjustable bezel/dial face• Bezel is sealed with on O-ring to

keep out water and oil

ID-S DIGIMATIC INDICATORFeatures:• Unlimited response speed eliminates

over-speed errors• Similar in size to standard 2 Dial Face

Features:• Interchangeable anvils are made

of alloy steel• The dial indicator is fully

protected by a rugged cover• For small Holes

Features:• Mitutoyo offers a complete selection of

Bore Gauges all with interchangeable anvils & accessories to perform close tolerance ID measurements

Features:• Mitutoyo’s Magnetic Stands accept

all Dial Indicators and Dial Test Indicators.

• The off/on switch offers instant mounting without any adverse effects to the Indicator or workpiece surface

BORE GAUGES

MAGNETIC STAND

6 Calipers & Other Gauges

Resolution Promo0(.4”)-12”/ 0(10)-300mm .0005”/0.01mm551-341-10 $ 914.48

Range Order No. Calibration$64.00

552-314-10 $ 2086.56 $165.000(1”)-40” .0005”/0.01mmResolution PromoRange Order No. Calibration

Graduation Promo0-6”

.001” 505-742 $ 140.60


0-12” 505-746 $ 328.70 $64.000-12” 505-749 $ 287.96 $64.00

$39.00

Resolution Remarks Promo0-6”/0-150mm

.0005”/0.01mm

500-160-30 $ 344.08

$ 39.00

Carbide-�pped Jaws for OD & ID500-164-30

500-173500-506-10

$ 429.64$ 530.10$ 1032.65Without Thumb Roller


0-8”/0-200mm0-12”/0-300mm0-24”/0-600mm

$39.00$51.00$64.00

$114.00500-763-200-8”/0-200mm $ 365.75 $51.00

Resolution Promo0-6”/0-150mm

.0005”/0.01mm

571-211-30 $ 438.84

$ 39.00

571-212-30571-213-10571-263-10*

$ 470.12$ 545.56$ 631.12


0-8”/0-200mm0-12”/0-300mm0-12”/0-300mm

$51.00

$114.00

$64.00 Resolution Promo0-18”/0-450mm .0005-.0002”/

(0.01-0.005mm) 192-671-10 $ 2318.40 $ 140.00

$ 3047.04


0-24”/0-600mm 192-672-10 $ 216.00

NIB STYLE/STANDARD DIGIMATIC CALIPERFeatures:• The rounded faces of the

jaws are ideal for accurate ID measurement.

• Supplied in fitted plastic holster and wooden case

CARBON FIBER DIGIMATIC CALIPER

MECHANICAL DIAL CALIPERFeatures:• New designed dial movement for ultra-smooth sliding and high-

shock protection.• New face for improved readability

DIGIMATIC ENCODER TECHNOLOGY CALIPERFeatures:• Large and clear LCD readout• Data Hold Unit (959143) is

optional.• Thumb roller included only on

calipers up to and including 12” or 300mm

• Carbide-tipped jaw-type calipers are also available

DIGIMATIC DEPTH GAUGEFeatures:• This gauge can keep track of the origin point,

once set for the entire life of battery.• Optional wider extension based are

available up to 450mm range models

DIGIMATIC MULTI-FUNCTION HEIGHT GAUGEFeatures:• Highly versatile multi-function

type• shown with optional bi-

directional tough-signal probe• carbide tipped longer scriber

is provided

Features:• Highly durable and easy to handle• Range of application can expand by using optional

attachments • Direct Readout of ID Measurement from LCD screen

* Encoder technology unavailable **Without SPC

**

*

* With IP67 and SPC

SUMMER 2018EFFECTIVE JULY 2ND - SEPTEMBER 29TH Other Gauges 7

Resolution Promo.5” .0005”575-313 $ 276.45

Range Order No. Calibration$39.00

Leaves Promo1/32”- 1/4” 186-101 $ 41.80

186-102 $ 56.12

Range Order No.

17/64”-1/2”

15

16

1-7mm 186-105 $ 52.44

186-106 $ 63.487.5-15mm

34

32

Leaves Promo1/64” - 17/64” by 64ths

& 9/32” - 1/2” by 32nds 186-901 $ 145.35

Size Order No.

25

Promo0-10mm 7301 $ 141.68Range Order No. Calibration

$51.00 Promo

0-.5”/0-12.7mm 700-118-20 $ 162.84Range Order No. Calibration

$39.00

RADIUS GAUGES Features:• Radius size is stamped on each gauge• Both concave and convex radius gauges become a pair with

lock clamp

Features:• Radius Gauges are

recommended for checking or laying out concave or convex radii.

• The holding cases provide protection and have indexed pockets for proper selection. The holder is furnished with this set, making it possible to check radii in confined or hard to reach locations.

DIAL THICKNESS GAUGEFeatures:• Standard, ceramic spindle/

anvil• Standard accessories

included 21AZB149 Spindle lifting lever for digimatic and dial thickness gauge (stroke 5”/12.7mm)

QUICK MINI THICKNESS GAUGEFeatures:• Measuring force less than 2N• Supplied in fitted case• A compact comparator designed for

carrying quick inspection of paper, thickness, leather, wires, plastic parts etc.

LINEAR GAUGEFeatures:• Maintains the reference point

even when the power is switched off

• Protected against dust and coolant on the factory floor

Did you know? The ABS (absolute) scale requires no origin setting after power-on and also has no limit to response speed. This means the zero position can be set, or reset with the origin switch at any time.

8 Laser

LASER SCAN MICROMETERS

LSMPAK V2.0 Software for Laser MicrometersOrder No. 02NGA002SALE $1,659.75Reg. List $2,213.00

• Software can import measurement data from multiple LSM-5200 display units to a PC allowing a variety of measuring systems to be constructed

• Capable of processing a maximum of 10 channels of measurement data

• Capable of calculation between channels, statistical analysis, file output of calculation results

LSMPAKLASER SOFTWARE FOR LSM-5200 DISPLAY UNIT

• A compact controller which could be used for multi-unit system configurations

• Capable of simple connection to a PC via USB

• A panel-mount type display unit designed for the LSM-S series

• Measurement of odd fluted parts, and simultaneous measurement / 2-program function are equipped

LSM-5200 DISPLAY UNITREAL-TIME MULTI-CHANNEL MEASUREMENT

LSM-5200 DisplayOrder No. 544-047SALE $2,812.50Reg. List $3,750.00

Resolution Promo .0002-.08 / .005-2mm 544-532 $ 6,647.25

$ 5,672.25$ 6,403.50$ 7,687.50

Range Order No.

.002-.4" / .05-10mm

.012-1.18" /0.3-30mm

.04-2.36" / 1-60mm

.04-4.72" / 1-120mm $ 13,500.00

544-534544-536544-538544-540

$3,075.00544-072A

Description

LSM - 6200

LSM-512S

LSM-506S LSM-503S LSM-501S LSM-500S .000001”-.0005”/0.00001-0.01mm

.000001”-.0005”/0.00001-0.01mm

.000001”-.005”/0.00002-0.1mm

.000002”-.005”/0.00005-0.1mm

.000005”-.005”/0.00001-0.1mm

Features Include:• Ultra-high speed 3200 scans/sec• Statistical calculation mode• RS-232C and I/O interfaces are standard• Capable of handling high speed applications or workpieces that vibrate• Free Quicktool software (for use with customer supplied PC and RS-232C cable

On select Laser Micrometers

SAVE 25%

With a wide variety of models, LSM Measurement can be utilized in diverseapplications. The LSM-500S can measure ultra-fine wires as thin as .0002”(0.005mm) in diameter to a resolution of .000001” (0.00001mm) Options for measuring large diameters are available.

8

SUMMER 2018EFFECTIVE JULY 2ND - SEPTEMBER 29TH

BUILD YOUR OWN DIGITAL READOUT PACKAGE

Features Included with purchase of AT715 ABSOLUTE Coolant Proof Linear Scale

KA-200 Digital CounterFeatures include: Excellent addition to manual machine retrofit packages Many high end functions packed into this standard counter Large LED display is sharp and bright. Easy to see at a distance The positive touch front panel keys are solid and easy to push with fast response The sub display lets you know what function you are currently using

Brackets

Code Description Without Minimum Purchase

With Minimum PurchaseMinimum Purchase:

$ 697.30

$ 1026.00One AT715 Linear Scale &One KA-200 Counter (2 or 3 axis)

See table for pricing

$ 734.00

$ 1080.00

174-183A

174-185A

your choice

KA-200 Counter (2-axis)

KA-200 Counter (3-axis)

1pc. Linerar Scale

Order No. Effective Range Without Minimum Purchase

$ 351.50

$ 351.50

$ 355.30

$ 355.30

$ 355.30

$ 359.10

$ 363.85

$ 370.50

$ 374.30

With Minimum Purchase

$ 380.95

539-801

539-802

539-803

539-804

539-805

539-806

539-807

539-808

539-809

539-811

4”/ 100mm

6”/ 150mm

8”/ 200mm

10”/ 250mm

12”/ 300mm

14”/ 350mm

16”/ 400mm

18”/ 450mm

20”/ 500mm

24”/ 600mm

$ 370.00

$ 370.00

$ 374.00

$ 374.00

$ 374.00

$ 378.00

$ 383.00

$ 390.00

$ 394.00

$ 401.00

$ 388.55

$ 394.25

$ 397.10

$ 433.20

$ 450.30

$ 511.10

$ 572.85

$ 635.55

$ 694.45

$ 770.45

539-813

539-814

539-815

539-816

539-817

539-818

539-819

539-820

539-821

539-822

28”/ 700mm

30”/ 750mm

32”/ 800mm

36”/ 900mm

40”/ 1000mm

44”/ 1100mm

48”/ 1200mm

52”/ 1300mm

56”/ 1400mm

60”/ 1500mm

$ 409.00

$ 415.00

$ 418.00

$ 456.00

$ 474.00

$ 538.00

$ 603.00

$ 669.00

$ 731.00

$ 811.00

$ 863.55

$ 953.80

$ 1045.00

$ 1591.25

$ 1698.60

$ 2042.50

$ 2090.00

$ 2137.50

$ 2280.00

$ 2541.25

539-823

539-824

539-825

539-860

539-861

539-862

539-863

539-864

539-865

539-866

64”/ 1600mm

68”/ 1700mm

72”/ 1800mm

80”/ 2000mm

88”/ 2200mm

96”/ 2400mm

100”/ 2500mm

104”/ 2600mm

112”/ 2800mm

120”/ 3000mm

$ 909.00

$ 1004.00

$ 1100.00

$ 1675.00

$ 1788.00

$ 2150.00

$ 2200.00

$ 2250.00

$ 2400.00

$ 2675.00

$ 267.00

$ 275.00

$ 297.00

$ 324.00

$ 451.00

$ 226.00

Price

64AAB196

64AAB197

64AAB198

64AAB191

64AAB194

64AAB200

Order No. Description

Universal bracket kit (12”)

Universal bracket kit (14 -16”)

Universal bracket kit

Bracket kit

Scale Y axis

Machine arm kit (KA Counter)

Milling System

Lathes

Grinders

All Systems

64AAB199 $ 58.00Screw kit

CNC FORM PROMO

HOW THE PROGRAM WORKS• Trade in your current FORM

machine any model, any make and trade up to a Mitutoyo CNC model

WHY CHOOSE MITUTOYO?

• Machine removal will be supplied

• SPC data management software included

• Lifetime technical phone support will be given

• On-site factory trained technicians dispatched from Mississauga, Montreal & Edmonton.

• ISO 17025 Calibration Laboratory

• ISO-17025 accredited Form calibrations

• In-house repair facility for all Mitutoyo products

• Inventory to spare parts & accessories

• Knowledgeable technical & sales support groups available

CNC FORM SYSTEM ADVANTAGESCNC Form systems have higher throughput through increased speed and greater flexibility with added

measuring axis. Did you want to know more about CNC form system advantages? Contact your Mitutoyo Canada sales

representative or email us at [email protected]

• By trading up you will receive the latest technology, ensuring reliable uptime, and lower maintenance costs.

9

A SIMPLE SOLUTION FOR YOUR DATA MANAGEMENT NEEDS Software created by Mitutoyo gives you the ability to organize your data with less errors than hand written process and easy traceability. Real Time Standard (small tool application) or Professional (CMM/Vision/Form) is designed for customers who want to analyze, check variables and attribute inspections to maximize production and minimize defects.

MEASURLINK VERSION 8

Description List PriceOrder No. 64AAB47064AAB471264-505A

So�ware Measurlink -Real Time Standard V8

So�ware Measurlink -Real Time Professional V8

Data Processor, DP-1VA

$ 1,434.00$ 2,154.00

FREE OF CHARGE* with purchase of either Measurlink - Real Time Standard or Pro

Events

DP-1VA provides the capability to be used as a standalone data processor, plus the enhanced functionality allows it to be used as a data logger, storing thousands of part measurements that can be downloaded to a host PC. The DP-1VA can also be used as an input tool for the transfer of measurements direct from measurement tool into your computer. MEASURLINK compatibility provides the user with the best of both a local collection and storage device, and an enhanced ability to analyze collected data.

GD&T Workshop - June 7th, 2018Location, location, location - find out why location is very important in the manufacturing industry. Learn the true definition of: Location tolerance, true position symmetry, concentricity and applying measurement tools and techniques. To register for more free workshops hosted by Mitutoyo Representatives go to www.mitutoyo.ca

Hosted by Miranda Dunham, Mitutoyo Metrology Service Technician and Jeff Hamelin, Mitutoyo Sales Support Technician

MITUTOYO CNC FORM FAMILY

• Developed to combined world class accuracy with maneuverability/ high-analysis capability.

• Enhanced detector safety functions, such as accidental touch and collision detection, is designed to reduce damage to both machine and work piece

• Expandable measuring axis Z, theta, Y and alpha.• Surface Form in one unit • Double stylus, plus column movement allows expanded diameter

measurements.

THESE ROUNDNESS & FORMTRACER MEASUREMENT MACHINES ARE PART OF AN UMBRELLA OF MITUTOYO PRODUCTS, UNDERNEATH THE FORM FAMILY.

FOR MORE INFORMATION ON THE ADVANTAGES OF ADOPTING CNC INNOVATIONSINTO YOUR WORK ENVIRONMENT, CONTACT YOUR MITUTOYO SALES REPRESENTATIVE

OR CONTACT US [email protected] / 905 821-1261

LEARN MORE ABOUT THIS EXCLUSIVE PACKAGE WITH THE TRADE IN - TRADE UP PROMO

• The RA-2200 provides high accuracy, speed and performance in roundness measurement.

• Comes fully automatic or digital adjustment table• Extremely high rotation accuracy

LEARN MORE ABOUT THE FORM CNC FAMILY

10

Profile Projectors 11SUMMER 2018EFFECTIVE JULY 2ND - SEPTEMBER 29TH

PROFILE PROJECTORS PACKAGES

PACKAGE #1PH-3515F KA Counter Package

$ 14,500.00LIST PRICE

PACKAGE #2PH-3515F QM-DATA Package


PACKAGE #3PH-3515F QM-DATA/OPT200


PACKAGE #4PH-A14 KA Counter Package


PACKAGE #5PH-A14 QM-DATA Package


PACKAGE #6PH-A14 QM-DATA/OPT200


ECONOMY STAND WITH CASTERS

$ 2,012.00SAVINGS OF

& ROTARY VISE

Order No. 050002-E-1

Order No. 172-144

ECONOMY STAND WITH CASTERS

$ 3,709.00SAVINGS OF

& ROTARY VISE, HEAVY DUTY TYPE

Order No. 050002-E-1

Order No. 218-003

Order No. M172868-1

Order No. M172868-2

Order No. M172868-3

Order No. M172810-4

Order No. M172810-5

Order No. M172810-6

PH-A14 Packages

PH-3515F Packages

• Now available with motorized XY stage• Simple and easy usability with powerful back up for your quality control system• Featuring a wide field of view (32x24mm) and a generous depth of focus (up to ± 11 mm)• Outstanding improvement in operational efficiency and productivity• Auto stitching function, batch measurements and one click measurement function is available

Quick Image 2D

STARTING AT

$29,500 USD

Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this printed matter as well as other technical data are to be regarded as approximate average values. We reserve the right to make changes to the corresponding designs. The stated standards, technical regulations, descriptions and illustrations of the products were valid at the time of printing. In addition, the products are subject to Canadian Export Administration Regulations. Re-export or relocation of Mitutoyo products may require prior approval by an appropriate governing authority. We have tried to be as accurate as possible, however, there may be some errors in text, specifications or price. Please confirm with your customer service rep. Some items may not be exactly as shown. Prices are in Canadian dollars, unless otherwise specified. Applicable taxes and shipping charges are extra. © 2018 Mitutoyo Canada Inc., Mississauga ON Canada We reserve the right to change specifications and prices without notice.

We reserve the right to change prices and specifications without notice. Not valid with any other offer or promotion. This promotion is for Canadian market only.

Request formal quotation for complete details.

QUICK IMAGE QI-C2010D

Vision Measuring System

precision tool sale summer 2018 - mitutoyo.ca qrt flyer... · • the dial indicator is fully...

Documents