practical skills on the topic. sampling of air and workplace air for laboratory research
TRANSCRIPT
![Page 1: PRACTICAL SKILLS ON THE TOPIC. SAMPLING OF AIR AND WORKPLACE AIR FOR LABORATORY RESEARCH](https://reader036.vdocuments.us/reader036/viewer/2022083005/56649f1b5503460f94c30ed3/html5/thumbnails/1.jpg)
PRACTICAL SKILLS ON THE TOPIC. SAMPLING OF AIR AND WORKPLACE AIR FOR LABORATORY
RESEARCH
![Page 2: PRACTICAL SKILLS ON THE TOPIC. SAMPLING OF AIR AND WORKPLACE AIR FOR LABORATORY RESEARCH](https://reader036.vdocuments.us/reader036/viewer/2022083005/56649f1b5503460f94c30ed3/html5/thumbnails/2.jpg)
PURPOSE:
Air sampling for laboratory tests carried out under the control of working conditions at work sites, as well as in monitoring air quality
![Page 3: PRACTICAL SKILLS ON THE TOPIC. SAMPLING OF AIR AND WORKPLACE AIR FOR LABORATORY RESEARCH](https://reader036.vdocuments.us/reader036/viewer/2022083005/56649f1b5503460f94c30ed3/html5/thumbnails/3.jpg)
: EQUIPMENT NEEDED
Aspirator with rotameter
Absorption devices
gas pipette
![Page 4: PRACTICAL SKILLS ON THE TOPIC. SAMPLING OF AIR AND WORKPLACE AIR FOR LABORATORY RESEARCH](https://reader036.vdocuments.us/reader036/viewer/2022083005/56649f1b5503460f94c30ed3/html5/thumbnails/4.jpg)
: THE ALGORITHM STEPS
A) sampling method of aspiration
![Page 5: PRACTICAL SKILLS ON THE TOPIC. SAMPLING OF AIR AND WORKPLACE AIR FOR LABORATORY RESEARCH](https://reader036.vdocuments.us/reader036/viewer/2022083005/56649f1b5503460f94c30ed3/html5/thumbnails/5.jpg)
1 -Podgotovit absorption solution, pour it into the absorption bottle in series.
2 Connect the absorption device with an aspirator.
3 Place the system in the breathing zone of the working (or at the point under the settlement.)
4 Pull through the absorption solution required volume of air (depending on the nature of the substance and the expected level of air pollution) In one place sequentially selected 5 samples.
5 When sampling air simultaneously to determine the temperature, humidity and air velocity.
6 Check the accompanying document (where and when sampled, the volume of air stretched for which studies sent to the laboratory, sampling of atmospheric vozduha- weather conditions at the time of sampling.)
7 Send the sample to the laboratory.
![Page 6: PRACTICAL SKILLS ON THE TOPIC. SAMPLING OF AIR AND WORKPLACE AIR FOR LABORATORY RESEARCH](https://reader036.vdocuments.us/reader036/viewer/2022083005/56649f1b5503460f94c30ed3/html5/thumbnails/6.jpg)
![Page 7: PRACTICAL SKILLS ON THE TOPIC. SAMPLING OF AIR AND WORKPLACE AIR FOR LABORATORY RESEARCH](https://reader036.vdocuments.us/reader036/viewer/2022083005/56649f1b5503460f94c30ed3/html5/thumbnails/7.jpg)
B. A VACUUM SAMPLING METHOD (USING GAS PIPETTES)
. 1 Fill the gas pipette water.
2 in the test site of a pipette to pour water (instead of water in the pipette gets analyzed air) to close the gas valve pipette (to clamp or clamps).
3 Check the accompanying document and send samples to the laboratory