positioners
DESCRIPTION
PosicionadoresTRANSCRIPT
-
WELDING POSITIONER
160
13-3/4 Diameter Table 0 to 5.5 RPM Rotation Speed Manual Tilt Adjustment 115V 0 to 90 Tilting Angle High Frequency Protected Standard w/Foot Control Switch Shipping Weight 113 lbs.
Designed for rotation of lighter work pieces. Will hold 440 lbs. in thehorizontal position and 250 lbs. in the vertical position.Note: C/G of load not to be more than 4 from the center of the turntableand 4 from the face of the turntable.
Low Profile Self Centering Reversible Jaws Easy Mounting External & Internal Gripping
- 0 - 8 on O.D.- 3 - 11 on I.D.
Shipping Weight 20 lbs.
MODEL NO:
The above illustration shows the chuck mounted to the PROFAX Welding Positioner WP-250.
See page 163 for complete specifications.
MODEL NO:
WP-250230V model available for export
(Foot Control CFS-302)
-
WELDING POSITIONERS
19-5/8 Diameter Table 0.4 - 4 RPM Rotation Speed Power Tilt Adjustment 115V 0 to 135 Tilting Angle High Frequency Protected Standard Fwd./Rev. Foot Control Shipping Weight 580 lbs.
24-1/2 Diameter 0.2 to 2 RPM Rotation Speed 115V 0 to 135 Tilting Angle High Frequency Protected Standard Fwd./Rev. Foot Control Shipping Weight 1,200 lbs.
MODEL NO:
MODEL NO:
Will hold 500 lbs. in the vertical position and 900 lbs. in the horizontal position. Note: C/G of load not to be more than 6 from the center of the turntable and 6 from the face of the turntable.
Will hold 1,000 lbs. in the vertical position and 1,750 lbs. in the horizontal position. Note: C/G of load not to be more than 6 from the center of the turntable and 6 from the face of the turntable.
WP-500
WP-1000
161
230V model available for export
230V model available for export
See page 163 for complete specifications.
(Foot Control CFS-404)
(Foot Control CFS-404)
See page 163 for complete specifications.
-
MODEL NO:
162
WELDING POSITIONER
35-1/2 Diameter Table .2 to 1.2 RPM Rotation Speed 440V 3 Phase models 0 to 135 Tilting Angle High Frequency Protected Standard Hand Control Pendant Shipping Weight 1,640 lbs.
Will hold 2,000 lbs. in the vertical position and 3,500 lbs. in the horizontal position. Note: C/G of load not to be more than 12 from the center of the turntable and 12 from the face of the turntable.
WP-2000-4 (440V 3PH)
2000 lb.Welding Positioner
163
WELDING POSITIONER GRIPPER
Self Centering Reversible Jaws Easy Mounting
SPECIFICATIONS WP-250 WP-500 WP-1000 WP-2000-4CAPACITY VERTICAL 250 LBS. 500 LBS. 1,000 LBS. 2,000 LBS.CAPACITY HORIZONTAL 440 LBS. 900 LBS. 1,750 LBS. 3,500 LBS.LOAD CENTER OF GRAVITY 4 6 6 12TILT MANUAL POWER POWER POWERTILT ANGLE (DEGREES) 0 - 90 0 - 135 0 - 135 0 - 135TILT ANGLE INDICATOR N/A N/A N/A STANDARDGROUND CAPACITY 200 AMPS 300 AMPS 500 AMPS 1,000 AMPSGROUNDING DEVICE CARBON BRASS BRASS ROTARYHIGH FREQ. PROTECTION YES YES YES YESVOLT / AC 115 115 115 440 3PHPOWER REQ. 5 AMP 10 AMP 10 AMP 5 AMPTABLE THICKNESS 9/16 7/8 1 1TABLE DIAMETER 13-3/4 19-5/8 24-1/2 35-1/2TABLE CONFIGURATION 3 - SLOT 4 - SLOT 4 - SLOT 4 - SLOTOPTIONAL CHUCK WPC-11 WPG-22 WPG-22 and 26 WPG-22, 26 and 34TABLE HEIGHT (HORIZONTAL) 13-7/32 25-1/4 33-11/16 35-7/8TABLE CENTER HEIGHT (VERTICAL) 10-3/64 21-1/4 29 30-3/4THROUGH HOLE 1-1/8 N/A N/A N/ATABLE R.P.M. 0 - 5.5 0.4 - 4 0.2 - 2 .2 - 1.2ROTATION MOTOR H.P. 1/8 H.P. 1/6 H.P. 1/4 H.P. 1 H.P.MAX. TORQUE 345 LBS./FT. 2,000 LBS./FT. 6,000 LBS./FT. 12,000 LBS./FT.VARIABLE SPEED ROTATION YES YES YES YESFOOT CONTROL SINGLE FWD./REV. FWD./REV. N/AHAND PENDANT OPTIONAL OPTIONAL OPTIONAL STANDARDANCHOR POINTS 4 4 6 6LEVELING BOLTS N/A INCLUDED INCLUDED INCLUDEDUNIT WIDTH 12-1/2 26 32-1/4 36UNIT LENGTH 21 33-7/8 48-1/2 61-1/2SHIPPING WEIGHT 113 LBS. 580 LBS. 1,200 LBS. 1,640 LBS.
COMPLETE POSITIONER SPECIFICATIONS
PROFAX NO. POSITIONER O.D. CAPACITY I.D. CAPACITY WEIGHTWPG-22 WP-500/WP-1000/WP-2000 1 - 15 4 - 22 130 LBS.WPG-26 WP-1000/WP-2000 1 - 18 6 - 26 235 LBS.WPG-34 WP-2000 2 - 26 6 - 34 365 LBS.
-
MODEL NO:
162
WELDING POSITIONER
35-1/2 Diameter Table .2 to 1.2 RPM Rotation Speed 440V 3 Phase models 0 to 135 Tilting Angle High Frequency Protected Standard Hand Control Pendant Shipping Weight 1,640 lbs.
Will hold 2,000 lbs. in the vertical position and 3,500 lbs. in the horizontal position. Note: C/G of load not to be more than 12 from the center of the turntable and 12 from the face of the turntable.
WP-2000-4 (440V 3PH)
2000 lb.Welding Positioner
163
WELDING POSITIONER GRIPPER
Self Centering Reversible Jaws Easy Mounting
SPECIFICATIONS WP-250 WP-500 WP-1000 WP-2000-4CAPACITY VERTICAL 250 LBS. 500 LBS. 1,000 LBS. 2,000 LBS.CAPACITY HORIZONTAL 440 LBS. 900 LBS. 1,750 LBS. 3,500 LBS.LOAD CENTER OF GRAVITY 4 6 6 12TILT MANUAL POWER POWER POWERTILT ANGLE (DEGREES) 0 - 90 0 - 135 0 - 135 0 - 135TILT ANGLE INDICATOR N/A N/A N/A STANDARDGROUND CAPACITY 200 AMPS 300 AMPS 500 AMPS 1,000 AMPSGROUNDING DEVICE CARBON BRASS BRASS ROTARYHIGH FREQ. PROTECTION YES YES YES YESVOLT / AC 115 115 115 440 3PHPOWER REQ. 5 AMP 10 AMP 10 AMP 5 AMPTABLE THICKNESS 9/16 7/8 1 1TABLE DIAMETER 13-3/4 19-5/8 24-1/2 35-1/2TABLE CONFIGURATION 3 - SLOT 4 - SLOT 4 - SLOT 4 - SLOTOPTIONAL CHUCK WPC-11 WPG-22 WPG-22 and 26 WPG-22, 26 and 34TABLE HEIGHT (HORIZONTAL) 13-7/32 25-1/4 33-11/16 35-7/8TABLE CENTER HEIGHT (VERTICAL) 10-3/64 21-1/4 29 30-3/4THROUGH HOLE 1-1/8 N/A N/A N/ATABLE R.P.M. 0 - 5.5 0.4 - 4 0.2 - 2 .2 - 1.2ROTATION MOTOR H.P. 1/8 H.P. 1/6 H.P. 1/4 H.P. 1 H.P.MAX. TORQUE 345 LBS./FT. 2,000 LBS./FT. 6,000 LBS./FT. 12,000 LBS./FT.VARIABLE SPEED ROTATION YES YES YES YESFOOT CONTROL SINGLE FWD./REV. FWD./REV. N/AHAND PENDANT OPTIONAL OPTIONAL OPTIONAL STANDARDANCHOR POINTS 4 4 6 6LEVELING BOLTS N/A INCLUDED INCLUDED INCLUDEDUNIT WIDTH 12-1/2 26 32-1/4 36UNIT LENGTH 21 33-7/8 48-1/2 61-1/2SHIPPING WEIGHT 113 LBS. 580 LBS. 1,200 LBS. 1,640 LBS.
COMPLETE POSITIONER SPECIFICATIONS
PROFAX NO. POSITIONER O.D. CAPACITY I.D. CAPACITY WEIGHTWPG-22 WP-500/WP-1000/WP-2000 1 - 15 4 - 22 130 LBS.WPG-26 WP-1000/WP-2000 1 - 18 6 - 26 235 LBS.WPG-34 WP-2000 2 - 26 6 - 34 365 LBS.
-
Power mast:Constant speed60 vertical travel92 clearance under boom
Power boom with:78 of reach200 lb. load capacityVariable speedAuto and manual settings
Anti-fall device
Manual travel car with:V-wheelsBrake
Locking swivel base with:Mounting bracket for power source
Hand control pendant
440V 3 phase
165
WELDING MANIPULATORS
MODEL NO:
WM-66-4WM-66-4
PROFAX NO: WM-SAOptional for mounting sub-arc package.
Maximum load capacity 5,000 lbs.(2,500 lbs. max for each the drive and idler)
Includes One Drive and One Idler 4 - 48 Diameter 0 to 5 RPM Rotation Speed 115V High Frequency Protected Standard Fwd./Rev. Foot Control Shipping Weight 430 lbs.
MODEL NO:
TR-5000
Maximum load capacity 1500 lbs.(750 lbs. max for each the drive and idler)
*Note: Additional idler rolls available PROFAX NO: IR-750
Includes One Drive and One Idler 1-1/2 to 16 Diameter 0 to 8 RPM Rotation Speed 115V High Frequency Protected Standard w/Foot Control Switch Adjustable Drive Tension Shipping Weight 146 lbs.
164
TURNING ROLLS
*Note: Additional idler rolls available PROFAX NO: IR-2500
230V model available for export
MODEL NO:
TR-1500230V model available for export
-
Power mast:Constant speed60 vertical travel92 clearance under boom
Power boom with:78 of reach200 lb. load capacityVariable speedAuto and manual settings
Anti-fall device
Manual travel car with:V-wheelsBrake
Locking swivel base with:Mounting bracket for power source
Hand control pendant
440V 3 phase
165
WELDING MANIPULATORS
MODEL NO:
WM-66-4WM-66-4
PROFAX NO: WM-SAOptional for mounting sub-arc package.
Maximum load capacity 5,000 lbs.(2,500 lbs. max for each the drive and idler)
Includes One Drive and One Idler 4 - 48 Diameter 0 to 5 RPM Rotation Speed 115V High Frequency Protected Standard Fwd./Rev. Foot Control Shipping Weight 430 lbs.
MODEL NO:
TR-5000
Maximum load capacity 1500 lbs.(750 lbs. max for each the drive and idler)
*Note: Additional idler rolls available PROFAX NO: IR-750
Includes One Drive and One Idler 1-1/2 to 16 Diameter 0 to 8 RPM Rotation Speed 115V High Frequency Protected Standard w/Foot Control Switch Adjustable Drive Tension Shipping Weight 146 lbs.
164
TURNING ROLLS
*Note: Additional idler rolls available PROFAX NO: IR-2500
230V model available for export
MODEL NO:
TR-1500230V model available for export
-
WCS-88MMotorized Welding Cross Slides
Specifications: Travel: 7-7/8 x 7-7/8 Slide Adjustment: Variable 0-8 i.p.m. Joystick Pendant Control Load Capacity: 200 lbs. @ 4 Motors: 24 VDC Input Power: 115 VAC WxHxD: 19-1/4 x 19-1/4 x 6-3/4 1-1/8 Dia. Hardened Load Bearing Guide Rods 1 Dia. Driven Screw Back of Slide Mount: 4 Pre-Drilled Holes Welding Head Mounting: 6 Drilled & Tapped Holes Weight of Slides: 86 lbs. Weight of Slides & Controls: 98 lbs.
WO-1SWelding Oscillator
Linear TypeSpecifications: Operator friendly pendant Torch Diameters: 5/8 to 1-3/8 Load Capacity: 10 lbs. Speed: 0-130 IPM Weld Width: 0-1-9/16 Centerline Adjustment: +/- 1/4 L & R Dwell: 0-2 sec. Motor 24V DC/Rack & Pinion Drive Input Power: 110 or 220 VAC
WO-1VWelding Oscillator
Angle Type
Specifications: Operator friendly pendant Torch Diameters: 5/8 to 1-3/8 Load Capacity: 10 lbs. Speed: 0-50 RPM Swing Width: +/- 8 deg. Centerline Adjustment: +/- 4 deg. L & R Dwell: 0-2 sec. Motor 24V DC/Worm Drive Input Power: 110 or 220 VAC
PROFAX NO. DESCRIPTIONWO-1S Welding oscillator - Linear
PROFAX NO. DESCRIPTIONWO-1V Welding oscillator - Angle
Adjustment Slide, Oscillator Linear Type,and Oscillator Angle Type
Welding Slide, Compound Slides andMotorized Welding Cross Slides
WCS-8 & WCS-88WCS-222Welding Slide & Compounded
Welding Cross Slides3-Way Torch Adjustment Slidewith Torch Angle Adjustment
PROFAX NO. DESCRIPTIONWCS-8 Welding slideWCS-88 Compounded slides
Specifications: (WCS-8) Travel: 7-7/8 Slide Adjustment: Manual Hand Wheel Integrated Slide Lock Load Capacity: 200 lb. @ 4 20mm (approx. 3/4) Dia. Hardened Load Bearing Guide Rods 16mm (approx. 5/8) Dia. Drive Screw Length of Slide: 13-1/4 (Including Handle While Extended 18) Height of Slide: 4-3/8 Depth: 2-3/8 Easily Compounded: 4 Bolts (Makes WCS-88) Convenient to Mount: 4 Pre-Drilled Holes Weight: 21 lbs. (WCS-88: 42 lbs.)
WCS-8
WCS-88
PROFAX NO. DESCRIPTIONWCS-222 3-Way adjustment slide
Specifications: LxWxH Adjustment: 1-3/4 x 1-3/4 x 1-3/4 Slide Adjustment: Manual Hand Wheel Torch Angle Adjustment: 90 Degree Torch Diameter: 5/8 - 1-3/8 Torch Clamp: V-Block Load Capacity: 10 lbs. Easy Mounting: 4 Drilled & Tapped Holes Weight: 3.5 lbs.
166 167PROFAX NO. DESCRIPTIONWCS-88M Motorized welding cross slides
-
WCS-88MMotorized Welding Cross Slides
Specifications: Travel: 7-7/8 x 7-7/8 Slide Adjustment: Variable 0-8 i.p.m. Joystick Pendant Control Load Capacity: 200 lbs. @ 4 Motors: 24 VDC Input Power: 115 VAC WxHxD: 19-1/4 x 19-1/4 x 6-3/4 1-1/8 Dia. Hardened Load Bearing Guide Rods 1 Dia. Driven Screw Back of Slide Mount: 4 Pre-Drilled Holes Welding Head Mounting: 6 Drilled & Tapped Holes Weight of Slides: 86 lbs. Weight of Slides & Controls: 98 lbs.
WO-1SWelding Oscillator
Linear TypeSpecifications: Operator friendly pendant Torch Diameters: 5/8 to 1-3/8 Load Capacity: 10 lbs. Speed: 0-130 IPM Weld Width: 0-1-9/16 Centerline Adjustment: +/- 1/4 L & R Dwell: 0-2 sec. Motor 24V DC/Rack & Pinion Drive Input Power: 110 or 220 VAC
WO-1VWelding Oscillator
Angle Type
Specifications: Operator friendly pendant Torch Diameters: 5/8 to 1-3/8 Load Capacity: 10 lbs. Speed: 0-50 RPM Swing Width: +/- 8 deg. Centerline Adjustment: +/- 4 deg. L & R Dwell: 0-2 sec. Motor 24V DC/Worm Drive Input Power: 110 or 220 VAC
PROFAX NO. DESCRIPTIONWO-1S Welding oscillator - Linear
PROFAX NO. DESCRIPTIONWO-1V Welding oscillator - Angle
Adjustment Slide, Oscillator Linear Type,and Oscillator Angle Type
Welding Slide, Compound Slides andMotorized Welding Cross Slides
WCS-8 & WCS-88WCS-222Welding Slide & Compounded
Welding Cross Slides3-Way Torch Adjustment Slidewith Torch Angle Adjustment
PROFAX NO. DESCRIPTIONWCS-8 Welding slideWCS-88 Compounded slides
Specifications: (WCS-8) Travel: 7-7/8 Slide Adjustment: Manual Hand Wheel Integrated Slide Lock Load Capacity: 200 lb. @ 4 20mm (approx. 3/4) Dia. Hardened Load Bearing Guide Rods 16mm (approx. 5/8) Dia. Drive Screw Length of Slide: 13-1/4 (Including Handle While Extended 18) Height of Slide: 4-3/8 Depth: 2-3/8 Easily Compounded: 4 Bolts (Makes WCS-88) Convenient to Mount: 4 Pre-Drilled Holes Weight: 21 lbs. (WCS-88: 42 lbs.)
WCS-8
WCS-88
PROFAX NO. DESCRIPTIONWCS-222 3-Way adjustment slide
Specifications: LxWxH Adjustment: 1-3/4 x 1-3/4 x 1-3/4 Slide Adjustment: Manual Hand Wheel Torch Angle Adjustment: 90 Degree Torch Diameter: 5/8 - 1-3/8 Torch Clamp: V-Block Load Capacity: 10 lbs. Easy Mounting: 4 Drilled & Tapped Holes Weight: 3.5 lbs.
166 167PROFAX NO. DESCRIPTIONWCS-88M Motorized welding cross slides