Toll Free

1-888-TDWmSon (839-6766)

WEDGE-LOCK Pipe Plugs are used for plugging pipe ends temporarily during such operations as testing piping and vessels, welding fittings to pipe ends without hazard of flammable vapors, and propelling pigs by compressed air.

WEDGE-LOCK Pipe Plugs are available in sizes 2 through 14, and each size seals a variety of pipe inside diameters.

Description Features

Special clamps are available to support the pipe in higher pressure applications.

Options

WEDGE-LOCK Pipe Plugs 8 through 14

WEDGE-LOCK Pipe Plugs 2 through 6

Patented in the United States and in foreign countries.ISO 9001 Certified

Special clamps are available to support the pipe in higher pressure applications.

The WEDGE-LOCK Pipe Plug in a typical hook-up.

Bulletin No: 5200.001.01Date: February 2000Cross Indexing No: n/aSupersedes: 5200.001.00 (2/99)

WEDGE-LOCK

Pipe PlugsFor 2- Through 14-inch

T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5100 Fax: 918-446-6327 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright 2006. All rights reserved T.D. Williamson, Inc. / Printed in USA

Dimensions and Part Numbers

Dimensions

Pipe Inside Diameters and Recommended Maximum Pressures

Pipe Inside Diameters and Recommended Maximum Pressures

LBypass Connection

Size L Bypass Connection Inches DN Inches mm Inches mm 2 50 6 152 1/8 3 3 80 8 203 1/2 15 3-1/2 90 8-1/8 206 1/2 15 4 100 9-1/4 235 1 25 6 150 11-1/8 283 1 25 8 200 11-1/2 292 2 50 10 250 12-1/4 311 2 50 12 300 12-1 /4 311 2 50 14 350 12-1/4 311 2 50

Size Weight Wedge-Lock Pipe Plugs Replacement Rubber Disc Weight Support Clamps Inches DN Lbs. Kg. Part Number Part Number Lbs. Kg. Part Number 2 50 2-1/2 1.1 12-0116-0000 12-0116-0002 4 1.8 12-0133-0000 3 80 7 3.2 12-0001-0000 12-0001-0002 8-1/2 3.8 12-0141-0000 3-1/2 90 10 4.5 12-0002-0000 12-0002-0002 9 4.1 12-0142-0000 4 100 15 6.8 12-0003-0000 12-0003-0002 18 8.1 12-0134-0000 6 150 26 11.8 12-0005-0000 12-0005-0002 22 9.9 12-0135-0000 8 200 59 27.1 12-0006-0000 12-0006-0002 31 14 12-0136-0000 10 250 88 39.9 12-0007-0000 12-0007-0002 67 30.2 12-0137-0000 12 300 110 49.9 12-0008-0000 12-0008-0002 81 36.5 12-0138-0000 14 350 122 55.3 12-0009-0000 12-0009-0002 94 42.3 12-0139-0000

Size Min. I.D. Max. I.D. Without Support Clamp With Support Clamp Inches DN Inches mm Inches mm psi Bar psi bar 2 50 1.94 49.3 2.07 52.6 2000 138 2500 172 3 80 2.88 73.2 3.09 78.5 2000 138 2500 172 3.09 78.5 3.25 82.6 1000 69 1500 103 3-1/2 90 3.38 85.9 3.50 88.9 2000 138 2500 172 3.50 88.9 3.75 95.3 1000 69 1500 103 4 100 3.88 98.6 4.06 103.1 2000 138 2500 172 4.06 103.1 4.25 107.9 1000 69 1500 103 6 150 5.75 146.1 6.07 154.2 2000 138 2500 172 6.07 154.2 6.25 158.8 1000 69 1500 103 8 200 7.75 196.9 8.00 203.2 2000 138 2500 172 8.00 203.2 8.25 209.6 800 55 1200 83 10 250 9.75 247.7 10.02 254.5 1500 103 2000 138 10.02 254.5 10.25 260.4 800 55 1200 83 12 300 11.75 298.5 12.00 304.8 1200 83 1700 117 12.00 304.8 12.25 311.2 800 55 1200 83 14 350 13.00 330.2 13.13 333.5 1000 69 1500 103 13.13 333.5 13.50 342.9 800 55 1200 83

Above maximum pressure ratings apply to GrB pipe or better (35,000 psi or 241 MPa minimum yield strength). Intermediate sizes of WEDGE-LOCK Pipe Plugs are available upon request. All plugs should be used in clean, round pipe.

WEDGE-LOCK

Pipe Plugs 5200.001.01- p2

T.D. Williamson, Inc. P.O. Box 3409 Tulsa, Oklahoma 74101-3409 918-447-5100 Fax: 918-446-6327 www.tdwilliamson.comData subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright 2006. All rights reserved T.D. Williamson, Inc. / Printed in USA