plugs and connectors product information · 125 plugs and connectors plugs and connectors product...
TRANSCRIPT
-
124
Plug
s an
d co
nnec
tors
Plugs and connectors K Product information
A high degree of safety.In one operation, the insulation is cut, thecontact is safely established and the wire is firmly held in place.
Under cover.A stable lock ensures permanent safety.
StarTOP® with SafeCONTACT. Quick. Safe. Tight.
ProTOP. With standard connection technology.
Many handy features, e.g., the self-locating thread for tight and stable connection of cover and front part. Cable grip and seal in one single operation by locking the cable gland.
Ingeniously toothed.The additional teeth on the locking ring audibly lock as the ring is tightened, thereby providing a protection against automatic release.
Video: mounting instructions
Video: advantages
-
125
Plug
s an
d co
nnec
tors
Plugs and connectors K Product information
AM-TOP® and PowerTOP® for use in corrosive environments.
Ergonomic. Practical. Safe.The first CEE angled plug with cable entry rotating up to 60°to the left or to the right.
If three phase equipment rotates in the wrong direction theMENNEKES phase inverter plug solves the problem rapidly andsafely. Simply depress the latch with a screw-driver and turn theinsulating element in which the two phase pins are fitted andthe motor will rotate in the correct direction.Two outer conductors rotatable through 180°.
Phase inverter ProTOP 16A and 32A. Angled plug VarioTOP.
Highly heat resistant contact carrier and nickel plated contacts. These appliances are guaranteed to be resistant to corrosive environments: High humidity, salt or acidic air, corrosive gases and vapours.
Accordingly, they are mainly used in the food processing industry, in breweries, dairies, farms and market gardens, wineries.
-
126
Plug
s an
d co
nnec
tors
Plugs and connectors K Product information
PowerTOP® Xtra 63A and 125A. More safety under high loads.
Comfortable:Easier opening andclosing of the hinged lidthrough integrated openingaid on the connector lid.
Tough:The plugs provide better corrosion protection in aggressive environments and at high degrees of air humidity thanks to nickel plated contacts. More safety through highly heat resistant contact carriers.
Clean:Closed, easy to cleansurface: cable gland isalways located directly onthe plug and connectorbody.
Comfortable self-locating thread lock between frontand back part. Stable and fast locking without screws. Unlocking only with just a tool according to the regulations.
Secure contact: Convenient inserting andwithdrawing throughSoftCONTACT at 63Aand TorsionSpringContactat 125A.
Video: advantages
Video: mounting instructions
-
127
Plug
s an
d co
nnec
tors
Plugs and connectors K Product information
PowerTOP® Xtra 63A and 125A. More safety under high loads.
Captive:Molded seals in theconnector lid and thefront part of the plug.
Slip-proof:Even easier inserting and withdrawing through optimumgrip, even with working gloves. Best performance at high humidity, snow and dirt thanks to the unique rubber coating of the grip surfaces as well as the ergonomic design.
Durable:Connectors with highlyheat resistant contact carriers;nickel-plated contact sleevesalso available on request.Pilot contact standard withplugs; optionally availablefor connectors.(Part number + index P).
Tested:All PowerTOP® Xtra plugsand connectors apply withthe amended standardEN/IEC 60 309-2. Touchproof in accordance withEN 50 274.
-
128
Plug
s an
d co
nnec
tors
Image Title Description
to DIN VDE 0623, EN 60309-2. Colour: electric grey and/or colour code. Enclosure and insert made of AMAPLAST.
Plugs and connectors K Plugs, 16A - 32A, IP 44
Plug StarTOP®
IP 44
Std. Pack. Qty: 10
Product group 2101.Image 33.
K screwless, with insulating displacement techniqueK SafeCONTACTK cable gland and sealingK strain relief and protection against kinkingK enclosure with thread lock and safety slide
Plug ProTOP
IP 44
Std. Pack. Qty: 10
Product group 2197.Image 148A.
K screw terminalsK cable gland and sealingK strain relief and protection against kinkingK enclosure with thread lock and safety slide
Angled plug VarioTOP
IP 44
Std. Pack. Qty: 10
Product group 2139.Image 3980.
K screw terminalsK cable entry hood rotating up to 60° to the left or the rightK with grommetK cable entry hood in colour code red or blueK especially suited for use with receptacles of the Cepex range
Angled plug
IP 44
Std. Pack. Qty: 10
Product group 2039.Image 1411.
K screw terminalsK with grommetK especially suited for use with receptacles of the Cepex range
Plug AM-TOP®
IP 44
Std. Pack. Qty: 10
Product group 2141.Image 3.
K screw terminalsK single part bodyK cable gland and sealingK strain relief and protection against kinking
Plug AM-TOP®
IP 67
Std. Pack. Qty: 10
Product group 2149.Image 300.
K screw terminalsK single part bodyK cable gland and sealingK strain relief and protection against kinking
-
129
Plug
s an
d co
nnec
tors
Drawing Amp. 16 322 MB 214 Poles 3 4 5 3 4 5
Dim. in mm a 148 160 160 197 197 197
b 55 65,6 65,6 75 75 75
h 61 72,5 72,5 80,5 80,5 85
n 112 123,5 123,5 152 152 152
y 14,5 16 16 22 22 22
Terminal for cond. cross 1 1 1 2,5 2,5 2,5
section (mm2) min.-max. —2,5 —2,5 —2,5 —6 —6 —6
Drawing Amp. 16 322 MB 214 Poles 3 4 5 3 4 5
Dim. in mm a 148 160 160 197 197 197
b 55 65,6 65,6 75 75 75
h 61 72,5 72,5 80,5 80,5 85
n 112 123,5 123,5 152 152 152
y 14,5 16 16 22 22 22
Terminal for cond. cross 1 1 1 2,5 2,5 2,5
section (mm2) min.-max. —2,5 —2,5 —2,5 —6 —6 —6
Drawing2 MB 208
Dim. in mm
2 MB 69 Amp. 16 322 MB 45 Poles 3 4 3 4 5Dim. in mm a 107 129 96 96 101
b 53 58 72 72 72h — — — — 115i 85 71 115 115 —o — — — — 70p 49 35 70 70 —y 17,5 17,5 22 22 22z 7 7 11 11 11 α 15° — 8° 8° —
Terminal for cond. cross 1 1 2,5 2,5 2,5section (mm2) min.-max. —2,5 —2,5 —6 —6 —6
Drawing
Other voltages and frequencies available on request.A
mp
ere
Pole
s
110V50 a. 60 Hz
230V50 a. 60 Hz
400V50 a. 60 Hz
500V50 a. 60 Hz
>50 - 500V100-300 Hz
>50 - 500V300-500 Hz
3p 4p 5p 3p 4p 5p 3p 4p 5p 3p 4p 5p 3p 4p 5p 3p 4p 5p
4h 4h 4h 6h 9h 9h 9h 6h 6h 7h 7h 7h 10h 10h 10h 2h 2h 2h
Part number
16 3 947 948
16 4 951 952 953 954
16 5 33
32 3 711 712
32 4 717 719 723
32 5 34
16 3 147A 148A 149A 647
16 4 654 151A 152A 153A 657 658
16 5 157A 13A 659 757 769
32 3 159 160
32 4 163 164 165 773
32 5 169A 14A 777
16 5 3981 3980
16 3 1410 1411
16 4 891 315
32 3 3312 3306
32 4 3646 3987
32 5 3424 3266
Drawing Amp. 16 322 MB 217 Poles 3 4 5 3 4 5
Dim. in mm a 142 147 147 186 186 180
b 53 59 67 70 70 77
h 59 69,4 76 81 81 89,5
n 105,2 110,5 110,5 141 141 135
y 14,5 16 16 22 22 22
Terminal for cond. cross 1 1 1 2,5 2,5 2,5
section (mm2) min.-max. —2,5 —2,5 —2,5 —6 —6 —6
16 3 247 248 249 2151 2168 2271
16 4 250 251 252 253 254 255
16 5 256 257 3 2014 2189 2243
32 3 259 260 261 2195 2341
32 4 262 263 264 265 266 267
32 5 268 269 4 2015 2244 2178
Drawing Amp. 16 322 MB 218 Poles 3 4 5 3 4 5
Dim. in mm a 142 144 147 186 186 180
b 70 78 87 94 94 101
n 109 111 114 145 145 138
y 14,5 16 16 22 22 22
Terminal for cond. cross 1 1 1 2,5 2,5 2,5
section (mm2) min.-max. —2,5 —2,5 —2,5 —6 —6 —6
16 3 277 278 279
16 4 280 281 282 283 284 285
16 5 286 287 288 2020
32 3 289 290 291
32 4 292 293 294 295 296 297
32 5 298 299 300 2021
-
130
Plug
s an
d co
nnec
tors
Plug AM-TOP®
IP 44
Std. Pack. Qty: 10
Product group 2141.Image 21421.
K screw terminalsK single part bodyK highly heat resistant contact carrierK nickel plated contactsK cable gland and sealingK strain relief and protection against kinking
Plug AM-TOP®
IP 67
Std. Pack. Qty: 10
Product group 2149.Image 21362.
K screw terminalsK single part bodyK highly heat resistant contact carrierK nickel plated contactsK cable gland and sealingK strain relief and protection against kinking
Plug PowerTOP®
IP 44
Std. Pack. Qty: 10
Product group 2015.Image 3935.
K screw terminalsK highly heat resistant contact carrierK nickel plated contactsK cable gland and external cable grip
Plug PowerTOP®
IP 67
Std. Pack. Qty: 10
Product group 2016.Image 3821.
K screw terminalsK highly heat resistant contact carrierK nickel plated contactsK cable gland and external cable grip
Image Title Description
to DIN VDE 0623, EN 60309-2. Colour: grey (RAL 7000) and colour code. Enclosure and insert made of AMAPLAST.
Plugs and connectors K Plugs, highly heat resistant contact carrier,
-
131
Plug
s an
d co
nnec
tors
Drawing Amp. 16 322 MB 217 Poles 3 4 5 3 4 5
Dim. in mm a 142 147 147 186 186 180
b 53 59 67 70 70 77
h 59 69,4 76 81 81 89,5
n 105,2 110,5 110,5 141 141 135
y 14,5 16 16 22 22 22
Terminal for cond. cross 1 1 1 2,5 2,5 2,5
section (mm2) min.-max. —2,5 —2,5 —2,5 —6 —6 —6
Drawing Amp. 16 322 MB 218 Poles 3 4 5 3 4 5
Dim. in mm a 142 144 147 186 186 180
b 70 78 87 94 94 101
n 109 111 114 145 145 138
y 14,5 16 16 22 22 22
Terminal for cond. cross 1 1 1 2,5 2,5 2,5
section (mm2) min.-max. —2,5 —2,5 —2,5 —6 —6 —6
Drawing Amp. 16 322 MB 174 Poles 3 4 5 3 4 5
Dim. in mm a 162 172 186 199 199 213
b 54 60 69 72 72 79
h 60 67 77 83 83 91
n 126 136 149 154 154 169
y 19 19 22 24,5 24,5 28,5
Terminal for cond. cross 1 1 1 2,5 2,5 2,5
section (mm2) min.-max. —2,5 —2,5 —2,5 —6 —6 —6
Drawing Amp. 16 322 MB 171 Poles 3 4 5 3 4 5
Dim. in mm a 162 172 186 199 199 213
b 71 79 89 95 95 102
n 129 139 152 157 157 172
y 19 19 22 24,5 24,5 28,5
Terminal for cond. cross 1 1 1 2,5 2,5 2,5
section (mm2) min.-max. —2,5 —2,5 —2,5 —6 —6 —6
16 3 22737 22302
16 4 22262 22289 20844
16 5 21421
32 4 22263 22326 20781
32 5 21428
16 3 21516
16 4 21517 20764 21491
16 5 21362
32 4 21519 20709 21492
32 5 21363
16 3 3918 3919 3920
16 4 3925 3927 3926 3928
16 5 3934 3936 3935
32 3 3942 3943 3944
32 4 3945 3946 3947 3948
32 5 3951 3952 3977
16 3 3794 3796 3799
16 4 3807 3811 3809 3810
16 5 3819 3823 3821
32 3 3829 3830 3832
32 4 3839 3844 3841 3842
32 5 3851 3855 3853
nickel plated contacts, 16A - 32A, IP 44 and IP 67 Other voltages and frequencies available on request
DrawingAmp
ere
Pole
s
110V50 a. 60 Hz
230V50 a. 60 Hz
400V50 a. 60 Hz
500V50 a. 60 Hz
>50 - 500V100-300 Hz
>50 - 500V300-500 Hz
3p 4p 5p 3p 4p 5p 3p 4p 5p 3p 4p 5p 3p 4p 5p 3p 4p 5p
4h 4h 4h 6h 9h 9h 9h 6h 6h 7h 7h 7h 10h 10h 10h 2h 2h 2h
Part number
-
132
Plug
s an
d co
nnec
tors
Image Title Description
to DIN VDE 0623, EN 60309-2. Colour: grey (RAL 7000) and colour code. Enclosure and insert made of AMAPLAST.
Plugs and connectors K Plugs, highly heat resistant contact carrier,
Plug PowerTOP® Xtra
IP 44
Std. Pack. Qty: 5
Product group 2215.Image 13112.
K screw terminalsK rubberised grip areaK frame terminalsK highly heat resistant contact carrierK nickel plated contactsK cable gland and sealingK strain relief and protection against kinkingK enclosure with thread lockK two safety slides
Plug PowerTOP® Xtra
IP 67
Std. Pack. Qty: 5
Product group 2216.Image 13212.
K screw terminalsK rubberised grip areaK frame terminalsK highly heat resistant contact carrierK nickel plated contactsK cable gland and sealingK strain relief and protection against kinkingK enclosure with thread lockK two safety slides
-
133
Plug
s an
d co
nnec
tors
nickel plated contacts, 63A - 125A, IP 44 and IP 67 Other voltages and frequencies available on request
Drawing Amp. 632 MB 226 Poles 3 4 5
Dim. in mm a 250 250 250
b 90 90 90
y 36 36 36
Terminal for cond. cross 6 6 6
section (mm2) min.-max. —16 —16 —16
Retaining nose only 60/63A
Drawing Amp. 63 1252 MB 225 Poles 3 4 5 3 4 5
Dim. in mm a 250 250 250 290 290 290
b 114 114 114 130 130 130
y 36 36 36 49 49 49
Terminal for cond. cross 6 6 6 25 25 25
section (mm2) min.-max. —16 —16 —16 —50 —50 —50
DrawingAmp
ere
Pole
s
110V50 a. 60 Hz
230V50 a. 60 Hz
400V50 a. 60 Hz
500V50 a. 60 Hz
>50 - 500V100-300 Hz
>50 - 500V300-500 Hz
3p 4p 5p 3p 4p 5p 3p 4p 5p 3p 4p 5p 3p 4p 5p 3p 4p 5p
4h 4h 4h 6h 9h 9h 9h 6h 6h 7h 7h 7h 10h 10h 10h 2h 2h 2h
Part number
63 3 13101 13102
63 4 13105 13106 13107
63 5 13111 13112
63 3 13201 13202 13203
63 4 13204 13205 13206 13207 13208 13209
63 5 13210 13211 13212 13213 13214
125 3 13215 13216
125 4 13217 13218 13219 13220
125 5 13223 13224 13225 13226 13227
Index: Overview: