please read the user’s guide fully before using the...

2
For more information: www.onguardlock.com User’s Guide ONGUARD EN Please read the User’s Guide fully before using the lock. 5513 Combo Glo Cable Lock YOUR NEW LOCK IS PRESET TO OPEN AT 0-0-0-5 STEP 1 Open the lock by aligning the preset combination number to the guide point and pull out the lock post. STEP 2 Turn the reset collar clockwise until it comes to a stop. STEP 3 Select your new combination by rotating the dials (for example: 1234). Be sure to write it down and keep it in a safe place. STEP 4 Turn the reset collar counter-clockwise until it comes to a complete stop back at its original position. STEP 5 Reinsert the locking post into the lock. The lock is now ready for normal use with your personal combination. Repeat these steps any time you wish to change your combination. 0 0 0 5 11 16 2 2 2 7 0 0 0 5 11 16 2 2 2 7 1 2 3 4 23 45 3 4 5 6 Guide Points Reset Collar Lock Post 0 0 0 5 11 16 2 2 2 7 HOW TO USE THE LIGHT TO SET YOUR OWN COMBINATION 000 0 111 1 999 9 888 8 999 9 777 7 BATTERY REPLACEMENT The new combo cable lock glo features a built-in micro light to illuminate the tumblers making reading the combo after dark a breeze. Press to illuminate the tumblers 888 8 999 9 777 7 Battery 2 x CR1220 (3V Lithium) Install the batteries plus (+) up Battery Compartment Note: Please recycle/dispose of old batteries properly.

Upload: vuongque

Post on 01-Apr-2018

220 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Please read the User’s Guide fully before using the lock.static1.squarespace.com/static/51e6e76be4b066098f51193e/t/52d0644...Please read the User’s Guide fully before using the

For more information: www.onguardlock.com

User’s GuideONGUARD EN

Please read the User’s Guide fully before using the lock.

5513 Combo Glo Cable Lock

YOUR NEW LOCK IS PRESET TO OPEN AT 0-0-0-5

STEP 1

Open the lock by aligning the preset combination number to the guide point and pull out the lock post.

STEP 2

Turn the reset collar clockwise until it comes to a stop.

STEP 3

Select your new combination by rotating the dials (for example: 1234). Be sure to write it down and keep it in a safe place.

STEP 4

Turn the reset collar counter-clockwise until it comes to a complete stop back at its original position.

STEP 5

Reinsert the locking post into the lock. The lock is now ready for normal use with your personal combination.

Repeat these steps any time you wish to change your combination.

0 0 0 51 1 1 62 2 2 7

0 0 0 51 1 1 62 2 2 7

1 2 3 42 3 4 53 4 5 6

Guide Points

Reset Collar

Lock Post0 0 0 51 1 1 62 2 2 7

HOW TO USE THE LIGHT TO SET YOUR OWN COMBINATION

0 0 0 0

1 1 1 1

9 9 9 9

8888

9999

7777

BATTERY REPLACEMENT

The new combo cable lock glo features a built-in micro light to illuminate the tumblers making reading the combo after dark a breeze.

Press to illuminate the tumblers

8888

9999

7777

Battery2 x CR1220(3V Lithium)

Installthe batteriesplus (+) up

Battery Compartment

Note: Please recycle/dispose of old batteries properly.

Page 2: Please read the User’s Guide fully before using the lock.static1.squarespace.com/static/51e6e76be4b066098f51193e/t/52d0644...Please read the User’s Guide fully before using the

For more information: www.onguardlock.com

BIKE LOCK DO’S & DON’TS

HOW TO LOCK UP YOUR BIKE

• Domarkyourbikeandtakeaphotoofitforfutureidentification.Thenfor free or a minimal fee, register or license your bike at the local law-enforcementoffice.

• Dolockyourbiketosomethingsolidinavisibleplace.Don’tlockyourbikethrough a chain-link fence – anyone with a set of wire cutters can easily snipthefenceandstealyourbike.Don’tlockyourbiketowoodenrailings–thievescanbreakthem.

• Douseundergroundparkinglotswithamplevideosurveillancecameras–cameras are excellent deterrents.

• Dolockyourbikenexttootherbikeswherepossible.• Dokeepanextrakeytoyourlockinasafeplace.Ifyoursisacombination

lock, keep the number in a secure place.

• Dorememberthatanounceofprotectionisworthapoundofcure.Thefewmomentsistakeseachtotimetolockupyourbikewillsaveyouthetimeand money it would take to replace your bike.

• Don’tparkyourbikeindarkalleys.Doselecthighlyvisiblelocationssuchasbusystreetsorinfrontofstores.Thievesarelesslikelytobotherwithyourbikeifit’slockedoutintheopen.

• Don’tlockyourbikeinthesamespoteachday.Thieves“case”behaviourpatternsandthriveonpredictability.Dolockyourbikeinadifferentlocationeach day.

• Don’tletyourlockrust.Afrozenlockissimplydeadweight.UseaperiodicsquirtofWD-40tokeepyourlockinasgoodworkingorderasyourbike.

One-Lock Method• Removethefrontwheelofyourbike(Pic.C,D)ormakesureyourlock

encircles the rim, not the spokes, of the wheel, as well as the bike frame (Pic. B).

• Lockyourbiketoafixedobjectthatcannotbeeasilybroken,cutorremoved.Somethievesgosofarastoremoveboltsfromsignposts.Onceyou’velockedyourbikearoundaseeminglysecurepole,thethiefsimplylifts the post out of the ground and slips off the lock.

• Positionthekeyentrysoitfacestheground.• Positionyourlockashighabovethegroundaspossibletomakeitharder

forathieftofindleverageandtomakethelockobvioustopassersby.• Removeunsecuredbikeparts,suchastheseat.

Multiple-Lock Method• Alllockscanbebroken.Yourjobistopresentanillusionofabove-average

resistance,convincingathiefthatstealingyourbikewillrequiretoomucheffort.

• UseamaximumU-lockorchainlockinconjunctionwithacablelock.Chancesareathiefwillseetwolocksandmoveontoanothervictim.

• SetuptheU-lockaroundyourreartire,frameandsomefixedobject.Thensnakethecablethroughyourfrontwheel,saddlerails,frameandtheU-lock(Pic.A).Youmaystillwalkawayfeelingwary,butyou’llknowthatyoudidthe best you could.

HOW TO CARE FOR LOCKS

EveryOnGuardLockisruggedlybuiltforlonglifeandtrouble-freeservice.Withminimalcare,yourOnGuardLockwillprovidesecurityandsmoothoperationformany years to come.Hereareafewtipsthatwillhelpyoukeepyourlockworkingefficiently:1. Lubricateyourlocksperiodicallywithalightmachineoil.Donotuse

graphiteinanyform!YourOnGuardLockisaprecisioninstrument,andgraphitemayactuallycausethelockingmechanismtostick.Applyoilinboth the keyway and shackle openings.

2. Locksusedoutdoorsmayrequireoccasionalcleaning.Todothis,submerse

themovernightinkerosene–letthemdrythoroughly–andapplyoil.3. Whenalockisoperatedinfrequentlyorexposedtosevereweather

conditions,internalworkingpartsmaybecometight.Inthesecases,exerta slight downward pressure on the shackle while the key is being turned. Doingthis3or4timeswillrelieveanytensionandwillusuallyrestoreeasyand normal operation of the lock.

4. Usecompressedairtohelpdislodgedebrisinthecylinder.5. keep locking assembly out of dirt and sand, debris will hinder the

performance and function of your lock.

A B

C D