piece parts catalog hudson - hudson...

DELCOPIECE PARTS CATALOG

HUDSON

1918 to 1919 MODELS

TheDayton Engineering Laboratories Co.

Dayton, Ohio

DELCO

PIECE PARTS CATALOG

HUDSON1918 to 1919 MODELS

FIRST EDITION

TheDayton Engineering Laboratories Co.

Dayton, Ohio

Delco Form 837-6-1-18

THE DELCO system is the pioneer in the electric starting, lighting and ignition field. Throughout the entire period of electrical development it has led the way.

Our Research and Experimental laboratories have placed DELCO equipment foremost in the Starting, Light-ing and Ignition Field.

Practically without exception, the cars with DELCO Equipm6nt stand foremost in their class.

Intelligent automobile buyers have learned that the automobile manufacturer who uses DELCO Equipment is the manufacturer who places QUALITY before PRICE.

When Piece Parts are required use only genuine DELCO parts. Parts made in our factory are tested mechan-ically and electrically. Order Piece Parts from our autho-rized service representatives by giving the Piece Parts numbers shown in this Catalog.

There is one reason for Delcosuccess --- and that is Delco

performance.

ii

PRICES

Prices are not shown in this catalog but are in a separate booklet, copy of which is sent with each catalog.

TERMS

Remittance must accompany the order in the form of draft, money order or cash, by registered mail. Personal checks will not be accepted. If remittance does not accompany the order, shipment will be made C. 0. D., or sight draft attached to bill-of-lading.

INDEX

On page iv is an index of the motor car models, by years, showing the electrical system for each model, and the pages on which the description of the piece parts for each complete piece of apparatus, will be found. On page 22 begins an index in numerical order of all piece parts shown in this catalog, and the page numbers on which each part will be found. On page iv is a chart showing the complete electrical system used on all models.

TO FIND PIECE PARTS IN CATALOG

Refer to index beginning on page iv and select the motor car model for which the piece part is required. The complete pieces of apparatus which make up the electrical system are listed under each model. When a complete system is not listed, only the parts shown were furnished by Delco. Opposite each complete piece of apparatus is shown the page number on which its description of piece parts begins. Preceding the description of piece parts, on the page shown under the name of the complete piece of apparatus, its illustration will be found. From the illustration and description, select the part required. If a part is first identified on the illustration, it may be located in the description by referring to its piece number given in the numerical index beginning on page 22, beside which is listed all the page numbers on which the description of that part is found.

HOW TO ORDER PARTS

(A mistake and delay in filling an order for parts may keep an automobile out of service for a longer time than is necessary. It is often difficult to fill orders for piece parts. To avoid delay and mistakes, give all or as much as possible, of the information requested below.)

In the description of the piece parts, the numbers in the column at the extreme left of each page are the piece numbers of the parts. The number in the third column represent the quantity of each piece part required in the assembly under which it is listed. (These numbers do not necessarily represent the quantity of each piece part required for the complete piece of apparatus). On all orders, the piece number, name of piece and quantity of parts wanted on the order, should be given. However, if there is any doubt regarding the correctness of the piece number of the part required, send a sketch and explain where the part is used, or send in the old part as a sample, transportation charges prepaid. (Unless instructions accompany to return the sample, it will be scrapped). In addition to the above, give the name, year, model, and serial number of the car for which the piece parts are required. Also give the serial number or date, and number of the complete piece of apparatus in which the part is to be used. Write plainly the name and address to which the shipment is to be made. Give shipping instructions, i. e. freight, express, parcel post insured. In all cases where the serial number of the complete piece of apparatus is furnished with the order for repair parts, parts will be shipped to serial number, regardless of whether the part number given is correct or not. If parts are wanted for stock only, it is unnecessary to give serial number.

STORAGE BATTERIES

We do not sell storage batteries or storage battery parts. All orders for batteries or their parts must be placed with the storage battery manufacturers or their representatives.

CLAIMS FOR SHORTAGE, DAMAGE, AND ERROR

Claims for shortage or errors in packing must be made immediately upon receipt of the shipment, and must be accompanied by the original packing slip. Claims for damage or shortages during transfer should be filled with the transportation company by the consignee. Our responsibility ceases upon delivery of the shipment to the transportation company. The transportation company's receipt for the shipment is evidence that they have received the shipment as billed, and in good condition.

iii

THE DAYTON ENGINEERING LABORATORIES CO., DAYTON, OHIO

Index of 1918 and 1919 Hudson Models Using Delco Equipment

Under each Model is listed the complete Electrical System used on that Model, and the pagenumber on which the description of piece part begins.

Super-Six J Model 1918 Hudson

Delco system 113 Page No

No. 82 MOTOR GENERATOR 3 No. 12207 MOTOR CLUTCH 7No. 5134 AUTOMATIC DISTRIBUTOR 9No. 2127 IGNITION COIL 11No. 1106 COMBINATION SWITCH 13

Super-Six Model 1919 Hudson

Delco System 216 Page No.No. 140 MOTOR GENERATOR 16 No. 13861 MOTOR CLUTCH 20No. 5134 AUTOMATIC DISTRIBUTOR 21 No. 2127 IGNITION COIL 21No. 1106 COMBINATION SWITCH 21

Chart Showing Hudson Models and Delco Apparatus Used on Each Model

HudsonModels

YearUsed

Delco System

Motor Generator

MotorClutch

Automatic Distributor

IgnitionCoil

CombinationSwitch

Super-Six JSuper-Six

19181919

113216

82140

1220713861

51345134

21272127

11061106

PIECE PARTS CATALOG Page 1

Hudson 1918—Super-Six—Model J


Hudson 1918—Super-Six—Model J

PieceNumber NAME OF PART Quantity

Required

82 12265

22065 20039 12260

12203

27128 12205

27912 28904 24008 12267

22359 22007 22520 26710 23226 20219 23197 20035 24015 23452 20393 20810 28902 28903 29722 26733 28211 29056 23023 22263 22900 21116 21105 26785 22395 20137 28214 26725 26769 12229

27117 27912 28212 28585 26675 26677 20791 20495 21036 20109 25361 2821320143 26704 20125

MOTOR GENERATOR Generator Frame Assembly (Includes the next 2 Items)Screw for Pole Piece Dowel Pin for Pole Piece Field Coil Assembly Complete (Includes the next 20 Items) (Do not count old style parts)Upper Field Coil Assembly Complete (Includes the next Item)Clip on Shunt Field Lead for Stud 28212 Lower Field Coil Assembly Complete (Includes the next Item)Clip on Lead for Generator Brush Holder Bracket Assembly 12273 Insulating Sleeve for Upper and Lower Field Coil connecting Lead (Not shown in Illustration) Clip on Lead for Generator Brush Holder Bracket Assembly 12273 (Old Style) before Serial No. 549843 Upper Motor Brush Plate Assembly Complete (Includes the next 2 Items)Stud for Holding Grounded Motor Brush Arm Assembly 12251 Plain Washer for Stud 22359 Rivet for attaching Upper Brush Plate Assembly 12267 Clip for Switch Spring 25960 on Upper Motor Brush Plate Assembly 12267 Insulating Bushing for Screw 20035 Insulator for Clip 26710 Lock Plate for Screw 20035 Screw for retaining Clip 26710 Screw for retaining Lead To Clip 26710 Nut for Screw 24015 Lock Washer for Nut 23452 Plain Washer for Nut 23452 Insulator for Series Strap on Field Coil Assembly 12260 (Inner) (Not shown in Illustration) Insulator for Series Strap on Field Coil Assembly 12260 (Outer) (Not shown in Illustration) Shield for Field Coil Assembly 12260 Shield (Metal) for Lower Field Coil Assembly 12205 Insulating Block for Stud 28212 (Not shown in Illustration) Stud for Motor Terminal Insulating Bushing for Stud 29056 Insulating Washer for Stud 29056 Plain Washer for Nut 21116 Nut for Stud 29056 (Large) Lock Washer for Nut 21116 Nut for Stud 29056 (Small) Clip for retaining Lead to Stud 29056 Lock Washer for Nut 25361 Nut for Stud 28212 (Generator Terminal, Large) Insulator (Fish Paper) on Inside of Frame for Stud 29056 Name Plate for Motor Generator Switch to Terminal Lead Assembly Complete (Includes the next 2 Items)Clip for Switch End of Lead Assembly 12229 Clip for Terminal End of Lead Assembly 12229 Stud for connecting Generator and Shunt Field Clip for Terminal End of Lead Assembly 12229 (Old Style) before Serial No. 549843 Stud for connecting Shunt Field (Old Sytle) before Serial No. 549843 Stud for connecting Generator Field (Old Style) before Serial No. 549843 Lock Washer for Stud 26677 (Old Style) before Serial No. 549843 Lock Washer for Stud 26675 (Old Style) before Serial No. 549843 Insulating Washer for Studs 26675 and 26677 (Old Style) before Serial No. 549843 Plain Washer for Studs 26675 and 26677 (Old Style) before Serial No. 549843 Nut for Stud 26675 (Old Style) before Serial No. 549843 Nut for Stud 28212 (Shunt Field Terminal) (Large) Lock \\'asher for Nut 26676 Insulating Bushing for Stud 28212 Insulating Washer for Stud 2821.2 (Outside)

11

241

1

1

1111

112122121111112111121111111111

112111112211222

Parts not listed in this catalog will not be sold separately Revised to June 1, 1918


HUDSON 1918 SUPER-SIX MODEL JDELCO SYSTEM 113

No. 82. MOTOR GENERATORIllustrated on pages 1 and 2

No. 82. MOTOR GENERATOR—Cont’dPiece

Number NAME OF PART QuantityRequired

20109 22395 25361 26784 26676 26662 26750 21746 26664 2(1125 20109 20495 12251

26644 24460 22751 22826 25960 25961 25762 27160 30065 20790 20393 12253

27123 28585 26730 26276 26274 20163 12269

12624

23754 23963 23964 25048 24111 12988 26226 25406 27170 21383 12270

26716 25716 22290 22340 28283 2861.0 2861.1 27114 20345 1.1823 12220 21703 20803 20808 24622 21536 24496 24829 247'70 24828 25638 26705 25670 26227

Plain Washer for Stud 28212Clip for retaining Lead on Stud 28212 (Generator Terminal) Nut on Stud 29056 for retaining ('lip 22395 Clip for retaining Lead on Stud 28212 (Shunt Field Terminal) Nut for retaining Clips 26784 and 22395 Plate on Generator Frame Assembly 12265 for attaching Upper Motor Brush Plate Assembly 12267Screw for attaching Plate 26662 Screw for attaching tipper Motor Brush Plate Assembly 12267 Insulating Bushing for Screw 21 746 (Not shown in Illustration) Insulating Washer for Screw 21746 Plain Washer for Screw 21746 Lock Washer for Screw 21 746 Grounded Motor Brush Arm Assembly Complete (Includes the next 14 Items)Brush Arm for (grounded Motor Brush Arm Assembly 12251 Brush for Brush Arm 26644 Screw for attaching Brush 24460 Lock Plate for Screw 22751 Spring on Generator Switch for Grounded Motor Brush Arm Assembly 12251 Plate for Spring 25960 Insulating Plate for Screw 22654 Insulating Bushing for Screw 22654 Screw for attaching Spring 25960 Plain Washer for Screw 22654 Lock Washer for Screw 22654 Grounded Motor Brush Arm to Generator Brush Bracket Lead Assembly Complete (Includes the next 2 Items)Clip for Brush Arm End of Lead Assembly 12253 Clip for Brush Bracket End of Lead Assembly 12253 Spring for Grounded Motor Brush Arm Assembly 12251 (Outer) Spring for Grounded Motor Brush Arm Assembly 12251 (Inner) Insulating \Washer for Grounded Motor Brush Arm Assembly 12251 (Under Cotter Pin 20163).Cotter Pin for retaining Grounded Motor Brush Arm Assembly 12251 Generator End Frame Assembly Complete (Includes the next 11 Items)End Frame Assembly (Includes the next 5 Items)Slide Plate for End Frame 26642 Guide for retaining Slide Plate 23754 (Outer) Guide for retaining Slide Plate 23754 (Inner) Rivet for retaining Guides 23963 and 23964 Felt Plug for Oil Hole in End Frame 26642 (Not shown in Illustration)Ball Bearing Assembly for Clutch End of Armature Shaft Retainer for Ball Bearing Assembly 12988 (Outer) Retainer for Ball Bearing Assembly 12988 (Inner) Screw for retaining Retainers 26226 and 25406 Washer (Felt) for Ball Bearing Assembly 12988 Generator Clutch Assembly Complete (Includes the next 9 Items)Shell for Generator Clutch Assembly 12270 Cam for Generator Clutch Assembly 12270 Roll for Cam 25716 Plunger for Roll 22290 Spring for Plunger 22340 Retainer for Roll 22290 (Inner) Retainer for Roll 22290 (Outer) Screw for retaining Retainers 28610 and 28611 Lock Washer for Screw 27114 Inner Race and Rolls Assembly for Pinion End of Amature Shaft Armature Assembly for Motor Generator Oil Retainer (Felt) for Inner Race and Rolls Assembly 11823 (Outer) Oil Retainer (Felt) for Inner Race and Rolls Assembly 11823 (Inner) Retainer for Oil Retainer 20803 Lock Washer for Clamp Screw 24496. . . . _ Clamp Washer for Motor Pinion 25670 Clamp Screw for Motor Pinion 25670 Lock Washer for Clamp Screw 24828 Clamp Washer for Generator Clutch Assembly 12270 Clamp Screw for Generator Clutch Assembly 12270 ..... Spacing Collar for retaining Inner Race and Balls Assembly 11823 (Outer) Spacing Sleeve on Armature Shaft for Spacing Collar 25638 Motor Pinion for Armature Shaft Cover for Generator Clutch Assembly 12270

2111213224221

112111322221

1111111

1

11141111421

114441144111111111111111


Page 4 THE DAYTON ENGINEERING LABORATORIES CO., DAYTON, OHIO


Required

12264

12263

26999 26659 20102 25812 23243 21412 20241 24111 12262

12261

26709 26781 23627 12252

12255

27207 25940 25947 24460 22826 22751 26713 26276 26274 20163 12272

26700 1.1813

11728

25491. 23079 22751 2281.7 11814

11729

25491 23079 22751 22817 1.2170

12169

25491 26639 26767 22817 26766 25931 20393

Motor End Frame Assembly Complete (Includes the next 9 Items)Motor End Frame Assembly (Includes the next 3 Items)Retainer (Felt) on End Frame Assembly 12263 for Shift RodPlate for retaining Retainer 26999 Rivet for retaining Plate 26659 Outer Race for Inner Race and Rolls Assembly 11823Retainer for Outer Race 25812 (Inner) Screw for retaining Retainer 23243 Lock Washer for Screw 21412 Felt Plug for Oil Hole in Motor End Frame Assembly 12264 ( Not shown in Illustration) Lower Motor Brush Plate Assembly Complete (Includes the next 16 Items)Lower Motor Brush Plate Assembly (Includes the next 3 Items)Stud for holding lower Motor Brush Arm Assembly 122.52Instruction Plate on Plate 26647 (Not shown in Illustration)Rivet for retaining Instruction Plate 26781 (Not shown in Illustration) Lower Motor Brush Arm Assembly Complete (Includes the next- 7 Items)Lower Brush Arm Assembly (Includes the next 3 Items)Roll for Brush Arm 26643 (Lower)Roll for Brush Arm 26643 (Upper) Plain Washer for retaining Rolls 27207 and 25940Brush for Lower Motor 'Brush Arm Assembly 12252Lock Plate for Screw 22751 Screw for attaching Brush 24460Spring for Lower Motor Brush Arm Assembly 12252 (Outer) Spring for Lower Motor Brush Arm Assembly, 12252 (Small) (Inner) Plain Washer for retaining Lower Motor Brush Arm Assembly 12252 Cotter Pin for retaining Washer 26274_ Generator Brush Holder Bracket Assembly (Includes the next Item)Spring Stud for Bracket Assembly 12272 Generator Brush Arm Assembly Complete (Right) (Includes the next 5 Items)Generator Brush Arm Assembly (Right) (Includes the next item)Spring Stud for Brush Arm 25358 (Not shown in Illustration)....Brush for Generator Brush Arm Assembly 11728 Screw for Attaching Brush 23079 Lock Plate for Screw 22751 Generator Brush Arm Assembly Complete (Left) (Includes the next 5 Items)Generator Brush Arm Assembly (Left) (Includes the next Item)Spring Stud for Brush Arm 25359 (Not shown in Illustration) Brush for Generator Brush Arm Assembly 11729 Screw for attaching Brush 23079 Lock Plate for Screw 22751 Third Generator Brush Arm Assembly Complete (Includes the next 9 Items)Third Generator Brush Arm Assembly (Includes the next Item)Spring Stud for Brush 26640 Extension Brush Arm for Third Generator Brush Arm Assembly 12170.. .Third Brush for Extension Brush Ann 26639 Lock Plate for Screw 26766 _Screw for attaching Third Brush 26767 Screw for attaching Extension Brush Arm 26639. . .Lock Washer for Screw 25931

1

1

112113311

1

1121

1

11211211111

11

1

11211

1

11211

1

1111222



No. 82. MOTOR GENERATOR—Cont’d


No. 82. MOTOR GENERATOR—Cont’dPiece

Number NAME OF PART QuantityRequired

20810 25356 25357 25783 20494 23623 26701 23249 20068 20495 25777 25781 25784 25779 21036 21298 25723 24201 20300 20393 12660 22690 20495 26750 26723 24621 26724 26723 24621 26670 26702 25626 23365 26997 23365 25796

Plain Washer for Screw 25931 Spring for Generator Brush Arm Assembly 11814 Spring for Generator Brush Arm Assembly 11813Spring for Third Generator Brush Arm Assembly 12170 Plate for Studs 25781 and 25777 Insulator for Studs 25781 and 25777 Stud for holding Generator Brush Arm Assembly 11813 Insulating Bushing for Studs 25781 and 25777 Nut for attaching Studs 25781, 25777 and 26701 Lock Washer for Nut 20068Stud for holding Third Generator Brush Arm Assembly 12170 and Generator Brush Arm Assembly 11814Spring Stud for Third Generator Brush Arm Assembly 12170 Insulating Sleeve for Spring Stud 25781 (Not shown in Illustration) Insulating Bushing on Stud 25777 for Third Generator Brush Arm Assembly 12170 Insulating Washer for Third Generator Brush Arm Assembly 12170 (Inner) Insulating Washer for Third Generator Brush Arm Assembly 12170 (Outer) Cotter Pin for retaining Third Generator Brush Arm Assembly 12170 (Not shown in Illustration) Plain Washer under Cotter Pin 25723 Screw for attaching Lead to Third Generator Brush Assembly 12170 Lock Washer for Screw 20300 Motor End Frame Cover Plate Assembly Complete Screw for attaching Lower Motor Brush Plate Assembly 12262 Lock Washer for Screw 22690 Screw for attaching Generator Brush Holder Bracket Assembly 12273 Screw for attaching Generator End Frame Assembly 12269 (Dowel) Screw for attaching Generator End Frame Assembly 12269 (Plain) Screw for attaching Motor End Frame Assembly 12264 (Round Head) (Dowel) Screw for attaching Motor End Frame Assembly 12264 (Hexagon Head) (Dowel) Screw for attaching Motor End Frame Assembly 12264 (Plain) Top Cover for both Ends of Motor Generator Fastener for retaining Top Cover 26670 Terminal Clip for Generator and Battery Terminals Fibre Ferrule for Clip 25626 Terminal Clip for Field Terminal Fibre Ferrule for Terminal Clip 26997 Motor Terminal Clip

2111221233111111111111133322112222111



Required

12207

12210 11721 27157 25506 20017 21538 26854 26688 26689

MOTOR CLUTCH COMPLETE (Includes the next 9 Items)Pinion Assembly Gear Assembly Cam for Gear Assembly 11721 Roll for Cam 27157 Plunger for Roll 25506Spring for Plunger 20017 Retainer for Roll 25506 (Inner) Retainer for Roll 25506 (Outer) Retainer for retaining Retainer 26688

1

111444111


HUDSON 1918 SUPER-SIX - MODEL J


No. 12207 MOTOR CLUTCH(Illustrated on page 7)


Required

5134 12306

23432 23433 24664 25048 25049 26137 20775 1.2307

12308

26868 20775 26865 26856 26867 27228 26293 26284 28834 27132 24336 26292 26132 22616 20704 20791 20310 23410 20076 22738 26208 20495 12029

12013 26209 26207 20393 261.53 2682913473

12312 26855 28566 26863 26862 25922 22884 25921 27221 23720 27222 27216 21786 26973 10282 21443 21.444 29124 291.25 27290

DISTRIBUTOR COMPLETE Housing Assembly Complete (Includes the next 7 Items)Clip for Distributor Head Assembly 11839 (With Clip 23433) (lip for Distributor Head Assembly 11839 (Long Tongue Clip) Clip for Distributor Head Assembly 11839 (Single) Rivet for retaining Clips 23432 and 23433 Rivet for retaining ('lip 24664 Stud for retaining Clip 24664 Cup for Housing 26841 Distributor Mounting Plate Assembly Complete (Includes the next 13 Items)Distributor Mounting Plate Assembly (Includes the next 2 Items)Plate for Distributor Mounting Plate Assembly 12308 (Not shown in Illustration) ('up for Plate 26868 Connector Plate for Distributor Mounting Plate Assembly 12308 (Not shown in Illustration) Insulating Plate for Connector Plate 26865 (Not shown in Illustration) Plate for retaining Contact Screw Assembly 12411 (Not shown in Illustration) Stud for Holding Distributor Mounting Plate Assembly 12307 (Not shown in Illustration) Insulating Bushing for Stud 27228 (Not shown in Illustration) Stud for retaining Contact Arm Assembly 12413 (Not shown in Illustration) Nut for Stud 26284 (Not shown in Illustration) Lock Washer for Nut 28834 (Not shown in Illustration) Insulating Washer for Stud 26284 (Not shown in Illustration) Insulating Bushing for Stud 26284 (Not shown in Illustration) Stud for Resistance Unit Assembly 12029 Plain Washer for Stud 26132 Nut for Retaining Stud 26132 Lock Washer for Nut 20704 Plain Washer for Nut 20704 Insulating Washer for Nut 20704 Insulating Washer for Stud 26132 Insulating Bushing for Stud 26132 Nut for Retaining Resistance Unit Assembly 12029 Lock Washer for Nut 26208 Resistance Unit Assembly Complete (Includes the next 5 Items)Resistance Unit Assembly Screw for retaining Clip 26153 Nut for Screw 26209 Lock Washer for Nut 26207 Clip for retaining Terminal ('lip 23374 Insulating Bushing for Stud 26137 Governor Weight Mounting Plate and Shaft Assembly (Includes the next 3 Items)Governor Weight and Mounting Plate Assembly (Service) Shaft for Distributor (Outer) Dowel Pin for Shaft 26855 Advance Sleeve for Shaft 26855 Shaft for Distributor (Inner) Advance Pin for connecting Shafts 26862 and 26855 Plain Washer for retaining Advance Pin 25922 Clip for retaining Advance Pin 25922 Cone for Shaft 26855 (Upper) Clip for retaining Cone 27221 Cone for Distributor Shaft 26855 (Lower) Stud for retaining Cones 27221 and 27222 Advance Ring for Shaft 26855 Pin for Advance Ring Retainer and Balls Assembly Clamp Nut for Shaft 26855 Lock Nut for Clamp Nut 21443 Spring for Governor Weight and Mounting Plate Assembly 12312 Clip for Spring 29124 (Not shown in Illustration) Spring for Governor Weight Assembly (Old Style) to be used with all Distributor Housings that are not Stamped with the letter "N"

11

11121111

1111111331111111111111111

111111111111112211121121133

3



Hudson 1918 Super-Six - Model J

No. 5134 DISTRIBUTOR(Illustrated on page 8)


Required

12309

12630 26933 23144 23239 20137 26869 12313 21797 25587 20238 13474 12413 12411 26836 25723 25634 12368

25324 23277 12316

27585 27995 26918 28031 12167

26645 23142 24414 23895 11839

21425 27608 21424 27607 11770 25729 23374 12741

Advance Lever Shaft Assembly Complete (Includes the next 5 Items)Advance Shaft Assembly Lever for Advance Shaft Assembly 12630 Screw for retaining Lever 26933 Nut for Screw 23144 Lock Washer for Nut 23239 Sleeve for Advance Shaft Assembly 12630 Advance Yoke Assembly Screw for Advance Yoke Assembly 12313 Cam for operating Contact Arm Assembly 12413 Plain Washer for Cam 25587 Distributor Cam Adjustment Screw Assembly for retaining Cam 25587 Contact Arm Assembly Contact Screw Assembly Nut for retaining Contact Screw Assembly 12411 Cotter Pin for retaining Contact Arm Assembly 12413 Spring for Contact Arm Assembly 12413 Condenser Assembly (Includes the next 2 Items)Screw for attaching Condenser Assembly 12335 Lock Washer for Screw 25324 Cover Plate and Name Plate Assembly (Includes the next 2 Items)Name Plate for DistributorRivet for Name Plate 27585 Screw for retaining Cover Plate and Name Plate Assembly 12316 Lock Washer for Screw 26918 Distributor Rotor Assembly Complete (Includes the next 2 Items) (Do not count Old Style Parts)Connector for Distributor Rotor Assembly 12167 (Old Style) Screw for Connector 26645 (Old Style) Spring for Brush 23895 Brush for Distributor Rotor Assembly 12167 Distributor Head Assembly Complete (Not shown in Illustration) (Includes the next 2 Items) (Do not count Old Style Parts)Plunger (Old Style) for Distributor Head Assembly 11839 (Approximately Diameter) Plunger for Distributor Head Assembly 11839 (Approximately Yt" Diameter )(Not shown in IllustrationSpring (Old Style) for Plunger 21425 (Approximately %" Diameter) Spring for Plunger 27608 (Approximately /" Diameter) (Not shown in Illustration) High Tension Terminal Assembly (Not shown in Illustration) Rubber Washer for High Tension Terminal Assembly 11770 (Not shown in Illustration) Terminal Clip for connecting Distributor (Not shown in Illustration) Wrench for Distributor (Not shown in Illustration)

1

11111111111111111

441

14441

11111

11117711




No. 5134 DISTRIBUTOR - Continued(Illustrated on page 8)




Required

212723771263622359726511106632336123365

IGNITION COIL COMPLETENut for High Tension TerminalLock Washer for Nut 23771Nut for retaining Bracket Assembly 10663Lock Washer for Nut 23597Bracket AssemblyTerminal Clip for connecting Ignition Coil 2137Fibre Ferrule for Terminal Clip 23361

11122122



Required

1106 13607

30741 13571

29969 12239 6055

26290 25973 26350 13021 13022 27103 26883 26756 26164 26434 2616325992 26165 26170 26466 30699 26472 27278 26167 26100 26162 26169 5706

12016 26297 29392 26337 25362 26283 25206 24046 12072 12005 26296 12006 24049 24733 24082 12007

12015 26320 26327 26330 26223 25972 25974

COMBINATION SWITCH COMPLETE Mounting Plate and Locking Device Assembly (Includes the next 3 Items)Rivet for retaining Lock Assembly 13571 Lock Assembly for Switch (Includes the next Item)Key for locking Switch (Give Series No. of Lock) Terminal Frame AssemblyAmmeter Complete (Includes the next 3 Items)Nut for Ammeter Stud (Short) Terminal Nut (Long) Lock Washer for Nut 26290 and Terminal Not 25973 Plunger Assembly (Ignition) Plunger Assembly (Lighting) Button for Plunger Assemblies 13021 and 13022 Plain Washer for Ammeter Stud (Small) Insulator for Ammeter 6055 Insulating Bushing for Ammeter Stud (Thick Shoulder) Insulating Bushing for Ammeter Stud (Thin Shoulder) Plain Washer for Ammeter Stud (Large) Insulating Washer for Ammeter Stud Strap for connecting Ammeter 6055 and Terminal Frame Assembly 12239 Screw for retaining Terminal Frame Assembly 12239 (Lighting End of Switch) Screw for retaining Terminal Frame Assembly 12239 under Ammeter 6055 Resistance Coil for Terminal Frame Assembly 12239 Screw for retaining Clip 26167 Lock Washer for Screw 26472 Clip for retaining Terminal Clip 26223 Nut on Screw 26472 for retaining Resistance Coil 26168 (Not shown in Illustration) Plain Washer for Screw 26472 (Not shown in Illustration) Screw for retaining Circuit Breaker 5706 Circuit Breaker Complete (Includes the next 20 Items)Contact Spring Assembly (Upper Contact) Spring for operating Armature Assembly 12005 Metal Plate under Spring 26297 Insulating Plate under Contact Spring Assembly 12016 Screw for retaining Contact Spring Assembly 12016 Insulating Bushing for Screw 25362 Lock Washer for Screw 25362 Plain Washer for Screw 25362 Circuit Breaker Assembly for Circuit Breaker 5706 Armature Assembly Coil for Circuit Breaker 5706 Core Assembly Screw for retaining Core Assembly 12006 (Not shown in Illustration) Insulating Sleeve for Core Assembly 12006 Pin for retaining Armature Assembly 12005 Bracket Assembly(Includes the next 4 Items)Terminal Assembly (Lower Contact) Rivet for retaining Terminal Assembly 12015 (Not shown in Illustration) Insulator for Terminal Assembly 12015 (Not shown in Illustration) Bracket for Bracket Assembly 12007 Terminal Clip for connecting Switch Terminal Screw for Terminal Nut 25973 Washer for Terminal Screw 25972

11

21

211

11213421111311116651121

1111222211111111

1211611




No. 1106 COMBINATION SWITCH(Illustrated on page 12)


Required

140 12265

22065 20039 12260

12203

27128 12205

2791.2 28904 12267

22359 22007 22520 26710 23226 20219 23197 20035 24015 23452 20393 20810 28902 28903 29722 26733 28211 29056 23023 22263 22900 21116 21105 26785 22395 20137 28214 26725 26769 12229

27117 27912 28212 28213 20143 26704 20125 20109 22395 25361 26784 26676 26662 26750 21746 26664 20125

MOTOR GENERATOR Generator Frame Assembly (Includes the next 2 Items)Screw for Pole Piece Dowel Pin for Pole Piece Field Coil Assembly Complete (Includes the next 20 Items)Upper Field Coil Assembly Complete (Includes the next Item)Clip on Shunt Field Lead for Stud 28212 Lower Field Coil Assembly Complete (Includes the next Item)Clip on Lead for Generator Brush Holder Bracket Assembly 12273 Insulating Sleeve for Upper and Lower Field Coils connecting Lead (Not shown in Illustration) Upper Motor Brush Plate Assembly Complete (Includes the next 2 Items)Stud for holding Grounded Motor Brush Arm Assembly 12251 Plain Washer for Stud 22359 Rivet for attaching Upper Motor Brush Plate Assembly 12267 Clip for Switch Spring 25960 on Upper Motor Brush Plate Assembly 12267 Insulating Bushing for Screw 20035 Insulator for Clip 26710lock Plate for Screw 20035 Screw for Retaining (lip 26710 Screw for Retaining Lead to Clip 26710 Nut for Screw 24015 Lock Washer for Nut 23452 Plain Washer for Nut 23452 Insulator for Series Strap on Field Coil Assembly 12260 (Inner) (Not shown in Illustration) Insulator for Series Strap on Field Coil Assembly 12260 (Outer) (Not shown in. Illustration) Shield for Field Coil Assembly 12260 (Insulating) Shield (Metal) for Lower Field Coil Assembly 12205 Insulating Block for Stud 28212 (Not shown in Illustration)Stud for Motor TerminalInsulating Bushing for Stud 29056Insulating Washer for Stud 29056 Plain Washer for Nut 21116 Nut for Stud 29056 (Large) Lock Washer for Nut 21116 Nut for Stud 29056 (Small) Clip for Retaining Lead to Stud 29056 Lock Washer for Nut 25361 Nut for Stud 28212 (Generator Terminal Large)Insulator (Fish paper) on Inside of Frame for Stud 29056 Name Plate for Motor Generator Switch to Terminal Lead Assembly Complete (Includes the next 2 Items)Clip for Switch End of Lead Assembly 12229 Clip for Terminal End of Lead Assembly 12229 Stud for connecting Generator and Shunt Field ..Nut for Stud 28212 (Shunt Field Terminal Large) Lock Washer for Nut 26676 Insulating Bushing for Stud 28212Insulating Washer for Stud 28212 (Outside) Plain Washer for Stud 28212 Clip for Retaining Lead on Stud 28212 (Generator Terminal) Nut on Stud 29056 for Retaining ('lip 22395 Clip for Retaining Lead on Stud 28212 (Shunt Field Terminal) Nut for Retaining Clips 26784 and 22395 Plate on Generator Frame Assembly 12265 for attaching Upper Motor Brush Plate Assembly 12267 Screw for attaching Plate 26662 Screw for attaching Upper Motor Brush Plate Assembly 12267 Insulating Bushing for Screw 21746 (Not shown in Illustration) Insulating Washer for Screw 21746

11

141

1

11

111

112122121111112111121111111111

11212222111213224


HUDSON 1919 SUPER-SIXDELCO SYSTEM 216

No. 140 MOTOR GENERATORIllustrated on pages 14 and 15



Required

20109 20495 12251

26644 24460 22751 22826 25960 25961 25762 27160 304)65 20790 2039312253

27123 28585 26730 26276 26274 2016312272

26700 11813

11728

25491 23079 22751 22817 11814

11729

25491 23079 22751 2281712170

12169

25491 26639 26767 22817 26766 25931 20393 20810 25356 25357 25783 20494 23623 26701 23249 20068 20495 25777 25781 25784 25779

Plain Washer for Screw 21746 Lock Washer for Screw 21746 Grounded Motor Brush Arm Assembly Complete (Includes the next 15 Items)Brush Arm for Grounded Motor Brush Arm Assembly 12251. .Brush for Brush Arm 26644 Screw for attaching Brush 24460 Lock Plate for Screw 22751 Spring on Generator Switch for Grounded Motor Brush Arm Assembly 12251 Plate for Spring 25960 Insulating Plate for Screw 30065 Insulating Bushing for Screw 30065 Screw for attaching Spring 25960 Plain Washer for Screw 30065Lock Washer for Screw 30065 Grounded Motor Brush Arm to Generator Brush Bracket Lead Assembly Complete (Includes the next 2 Items)Clip for Brush Arm End of Lead Assembly 12253 Clip for Brush Bracket End of Lead Assembly 12253 Spring for Grounded Motor Brush Arm Assembly 12251 (Outer) Spring for Grounded Motor Brush Arm Assembly 12251 (Inner) Insulating Washer for Grounded Motor Brush Arm Assembly 12251 under Cotter Pin 20163 Cotter Pin for Retaining Grounded Motor Brush Arm Assembly 12251 Generator Brush Holder Bracket Assembly (Includes the next Item)Spring Stud for Generator Brush Holder Bracket Assembly 12273 -Generator Brush Arm Assembly Complete (Right) (Includes the next 5 Items)Generator Brush Arm Assembly (Right) (Includes the next Item)Spring Stud for Generator Brush Arm Assembly 11728 Brush for Generator Brush Arm Assembly 11728 Screw for attaching Brush 23079 Lock Plate for Screw 22751 Generator Brush Arm Assembly Complete (Left) (Includes the next 5 Items)Generator Brush Arm Assembly (Left) .(Includes the next Item)Spring Stud for Brush Arm Assembly 11729 Brush for Generator Brush Arm Assembly 11729 Screw for attaching Brush 23079 Lock Plate for Screw 22751 Third Generator Brush Arm Assembly Complete (Includes the next 9 Items)Third Generator Brush Arm Assembly. . .(Includes the next Item)Spring Stud for Third Generator Brush Arm Assembly 12169 Extension Brush Arm for Third Generator Brush Arm Assembly 12170 Third Brush for Extension Brush Arm 26639Lock Plate for Screw 26766 Screw for attaching Third Brush 26767 Screw for attaching Extension Brush Arm 26639 Lock Washer for Screw 25931 Plain Washer for Screw 25931 Spring for Generator Brush Arm Assembly 11814 Spring for Generator Brush Arm Assembly 11813 Spring for Third Generator Brush Arm Assembly 12170 Plate for Studs 25781 and 25777Insulator for Studs 25781. and 25777 Stud for Holding Generator Brush Arm Assembly 11813 Insulating Bushing for Studs 25781 and 25777 Nut for attaching Studs 25781, 25777 and 26701 Lock Washer for Nut 20068Stud for holding Third Generator Brush Arm Assembly 12170 and Generator Brush Arm Assembly 11814Spring Stud for Third Generator Brush Arm Assembly 12170 Insulating Sleeve for Spring Stud 25781 Insulating Bushing on Stud 25777 for Third Generator Brush Arm Assembly 12170

221

112111322221

1111111

11

1

11211

1

11211

1

111122221112212331111



Hudson 1919 Super-Six

No. 140 MOTOR GENERATOR - Continued(Illustrated on pages 14 and 15)


Required

21036 21298 25723 24201 20300 2039313892

12263

26999 26659 20102 11698

11.823 25812 23243 21412 20241. 24111 21703 20803 12262

12261

26709 PAGE 626781 23627 12252

12255

27207 25940 25947 24460 22826 22751 26713 26276 26274 20163 12660 12269

12624

23754 23963 23964 25048 24111 12988 26226 25406 27170 21383 12220 13893

30290 30292

Insulating Washer for Third Generator Brush Arm Assembly 12170 (Inner) Insulating Washer for Third Generator Brush Arm Assembly 12170 (Outer) Cotter Pin for Retaining Third Generator Brush Arm Assembly 12170 (Not shown in Illustration)...Plain Washer under Cotter Pin 25723Screw for attaching Lead to Third Generator Brush Arm Assembly 12170. .Lock Washer for Screw 20300Motor End Frame Assembly Complete (Includes the next 13 Items)Motor End Frame Assembly(Includes the next 3 Items)Retainer (Felt) on End Frame Assembly 12263 for Shift Rod Plate for Retaining Retainer 26999 Rivet for Retaining Plate 26659 Roller Bearing Assembly for Pinion End of Armature Shaft (Includes the next 2 Items)Inner Race and Rolls Assembly Outer Race for Inner Race and Rolls Assembly 11823 Retainer for Roller Bearing Assembly 11698 (Inner) Screw for Retaining Retainer 23243 Lock Washer for Screw 21412 Felt Plug for Oil Hole in Motor End Frame Assembly 13892 (Not shown in Illustration) Felt Washer for Roller Bearing Assembly 11698 (Outer) and 2080 Felt Washer for Roller Bearing Assembly 11698 (Inner) Lower Motor Brush Plate Assembly Complete (Includes the next 16 Items)Lower Motor Brush Plate Assembly (Includes the next 3 Items)Stud for holding Lower Motor Brush Arm Assembly 12252 NO. 140 MOTOR GENERATOR - HUDSONInstruction Plate on Plate 26647 (Not shown in Illustration) Rivet for Retaining Instruction Plate 26781 (Not shown in Illustration) Lower Motor Brush Arm Assembly Complete (Includes the next 7 Items)Lower Brush Arm Assembly (Includes the next 3 Items)Roll for Brush Arm 26643 Lower Roll for Brush Arm 26643 Upper Plain Washer for Retaining Rolls 27207 and 25940 Brush for Lower Motor Brush Arm Assembly 12252 Lock Plate for Screw 22751 Screw for attaching Brush 24460 Spring for Lower Motor Brush Arm Assembly 12252 (Outer) Spring for Lower Motor Brush Arm Assembly 12252 (Inner) (Small) Plain Washer for Retaining Lower Motor Brush Arm Assembly 12252 Cotter Pin for retaining Washer 26274 Motor End Frame and Cover Plate Assembly Generator End Frame Assembly Complete (Includes the next 11 Items)End Frame Assembly (Includes the next 5 Items)Slide Plate for End Frame Assembly 12269 Guide for Retaining Slide Plate 23754 (Outer) Guide for Retaining Slide Plate 23754 (Inner) Rivet for Retaining Guides 23963 and 23964 . Felt Plug for Oil Hole in End Frame Assembly 12269 (Not shown in Illustration) Ball Bearing Assembly for Clutch End of Armature ShaftRetainer for Ball Bearing Assembly 12988 (Outer) Retainer for Ball Bearing Assembly 12988 (Inner) Screw for Retaining Retainer 26226 and 25406 Washer (Felt) for Ball Bearing Assembly 12988 Armature Assembly for GeneratorGenerator Clutch Assembly Complete (Includes the next 9 Items)Shell for Generator Clutch Assembly 13893Cam for Generator Clutch Assembly 13893






Required

27714 20017 20024 30291 30526 27114 20345 22690 2049526750 26723 24621 26724 26723 24621 20808 24622 21536 24496 24829 24770 24828 25638 26705 25670 30522 26277 26670 26702 25626 23365 26997 23365 25796

Plunger for Roll 27714Spring for Plunger 20017 Retainer for Roll 27 714 (Inner)Retainer for Roll 27714 (Outer)Screw for Retaining Retainer 30291 and 30526Lock Washer for Screw 27114 Screw for attaching Lower Motor Brush Plate Assembly 12262 Lock Washer for Screw 22690Roll for Cam 30292 Screw for attaching Generator Brush Holder Bracket Assembly 12273 Screw for attaching Generator End Frame Assembly 12269 (Dowel) Screw for attaching Generator End Frame Assembly 12269 (Plain) Screw for attaching Motor End Frame Assembly 13892 (Round Head and Dowel) Screw for attaching Motor End Frame Assembly 13892 (Hexagon Head and Dowel) Screw for attaching Motor End Frame Assembly 13892 (Plain) Retainer for Oil Retainer 20803 Lock Washer for Clamp Screw 24496 Clamp Washer for Motor Pinion Clamp Screw for Motor Pinion Lock Washer for Clamp Screw 24828 Clamp Washer for Generator Clutch Assembly 13893 Clamp Screw for Generator Clutch Assembly 13893 Spacing Collar on Armature Shaft next to Roller Bearing Assembly 11.698 Spacing Sleeve on Armature Shaft for Spacing Collar 25638 Motor Pinion for Armature Shaft (Used temporarily as 30522 Pinion is not available) Motor Pinion for Armature Shaft Cover for Generator Clutch Assembly 13893 Top Cover for both Ends of Motor Generator Fastener for Retaining Top Cover 26670 Terminal Clip for Generator and Battery Terminal Fibre Ferrules for Terminal Clip 25626 Terminal Clip for Field Terminal Fibre Ferrule for Terminal Clip 26997 Motor Terminal Clip

3331144333221121111111111112222111





PieceNumber

NAME OF PART QuantityRequired

13861

122101392827157155062001721538268542668826689

MOTOR CLUTCH COMPLETE (Includes the next 9 Items)Pinion AssemblyGear assemblyCam for Gear Assembly 13928Roll for Cam 27157Plunger for Roll 25506Spring for Plunger 20017Retainer for Roll 25506 (Inner)Retainer for Roll 25506 (Outer)Retainer for retaining Retainer 26688

1

1114441 11







No. 5134 DISTRIBUTOR(For description of Piece Parts see page 9 under Hudson 1918 Super-Six Model J)

No. 2127 IGNITION COIL(For description of Piece Parts see page 11 under Hudson 1918 Super-Six Model J)

No. 1106 COMBINATION SWITCH(For description of Piece Parts see page 13 under Hudson 1918 Super-Six Model J


Page 22 COMPLETE NUMERICAL INDEX - HUDSON 1918-1919

Part No. Shown OnPage Nos.



Page No. Shown OnPage Nos.

82 140 1106 2127 5134 5706 6055 10282 10663 11698 11721 11728 11729 11770 11813 11814 11823 11839 12005 12006 12007 12013 12015 12016 12029 12072 12167 12169 12170 12203 12205 12207 12210 12220 12229 12239 12251 12252 12253 12255 12260 12261 12262 12263 12264 12265 12267 12269 12270 12272 12306 12307 12308 12309 12312 12313 12316 12368 12411 12413 12624 12630 12660 12741 12988 13021

31613-2111-219-21131391116175-175-17105-175-174-181013131391313913105-175-173-163-1677-204-183-16134-175-184-175-183-165-185-185-1853-163-164-1845-1799910910101010104-18106-18104-1813

13022 13473 13474 13571 13607 13861 13892 13893 13928 20017 20024 20035 20039 20068 20076 20102 20109 20125 20137 20143 20163 20219 20238 20241 20300 20310 20345 20393

20494 20495 20704 20775 20790 20791 20803 20808 20810 21036 21105 21116 21298 21383 21412 21424 21425 21443 21444 21536 21538 21703 21746 21786 21797 22007 22065 22263 22290 22340 22359 22395 22520 22616 22690 22738 22751

139101313201818207-18-20183-163-166-1795-183-4-16-173-4-163-10-163-164-5-17-183-16 105-186-1794-183-4-5-6-9-16-176-173-4-6-9-17-18994-173-94-184--193- 6-16-173-6-173-163-166-174-185-181010994-197-204-184-169103-163-163-16443-163-4-163-1696-1894-5-17-18

22817228262288422900 23023 2307923142 2314423197 23226 232392324323249 23277233612336523374 2341023432 23433 23452 23597 23623 23627 23720 237542377123895 23963 23964 2400824015 24046 240492408224111 242012433624414 24460244962462124622 24664 24733 247702482824829 25048 25049 252062532425356 253572536125362 254062549125506 25587 25626 25634 25638 256702571625723

5-1.74-5-17-1893.-16 3-16 5-1710103-16 3-16 05-18 6--17 10116--11-19109993-16 116-17 5-18 94-18 11104-18 4-18 33-16 1313134-5-186-17 9104-5-17-184-19 6-19 4-19 9134-19 4-19 4-19 4-9-18913106-17 6-17 3-4-16134-18 5-17 7-20 106-19 104-19 4-19 46-10-17

25729 25762 25777 25779 25781 25783 25784 25796 25812 25921 25922 25931 25940 25947 25960 25961 25972 25973 25974 25992 26100 26132 26137 26153 26162 26163 26164 26165 26167 26169 26170 26207 26208 26209 26223 26226 26227 26274 26276 26277 26283 26284 26290 26292 26293 26296 26297 26320 26327 26330 26337 26350 26362 26434 26466 26472 26511 26639 26644 26645 26659 26662 26644 26670 26675 26676

104-176-176--176-176--176-176-195-18995-175-185--184--174-17-1313131.313999131313131313139 9 9 134-1844-5-17-184-5-17-181913913991313131313131311131313115-174-17105-184-164-166-1934-16

COMPLETE NUMERICAL INDEX - HUDSON 1918-1919 Page 23




Page No. Shown OnPage Nos.

26677 26688 26689 26700 26701 26702 26704 26705 26709 26710 26713 26716 26723 26724 26725 26730 26733 26750 26756 26766 26767 26769 26781

37-207-205-176-176-193-164-195-183-165-1846-196-193-164-173-16 4-6-16-19135-175-173-165-18

26784 26785 26829 26836 26854 26855 26856 26862 26863 26865 26867 26868 26869 26883 26918 26933 26973 26997 26999 27103 27114 27117 27123

4-163-169107-2099999991013101096-195-18134-183-164-17

27128 27132 27157 27160 27170 27207 27216 27221 27222 27228 27278 27290 27585 27607 27608 27714 27912 27995 28031 28211 28212 28213 28214

3-1697-204-174-185-189999139101010183-1610103-163-163-163-16

28283 28566 28585 28610 28611 28834 28902 28903 28904 29056 29124 29125 29392 29722 29969 30065 30290 30291 30292 30522 30526 30699 30741

493-4-174493-163-163-163-1699133-16134-1718181819181313


piece parts catalog hudson - hudson...

Documents