ph.d. (mechanical) on ‘modeling and analysis of six sigma ... · qualified lead auditor of...

Faculty Profile

Prof. Ashish Soti

Director

[email protected]

Educational Qualification

Ph.D. (Mechanical) on ‘Modeling and Analysis of Six-Sigma system in Manufacturing’ from

G.B. Technical University, Lucknow in 2012.

Bachelor’s Degree in Production Engineering with Distinction from Sardar Vallabhbhai

Regional College of Engineering & Technology, Surat in 1996.

PGDBM in Operations and Systems from IMT-Ghaziabad in 2001.

Experience

Presently Working as Director in Dronacharya Group of Institutions from 10th July 2017.

Worked with Krishna Engineering College, Ghaziabd as Professor in Mechanical Engineering

Department, also Prof. Head for NBA & IQAC, (July, 2016 to July, 2017).

Worked as Director at Raj Kumar Goel Engineering College, Pilukhuwa ( July, 2012 to July,

2016).

Worked with Raj Kumar Goel Engineering College, Ghaziabad as Professor in Mechanical

Department and Dean Student Welfare. Hold the post of Dean Academic and Professor Head

Training & Placement, also (July, 2010 to July,2012).

Worked at RKGIT, Ghaziabad as Assistant Professor, Associated Professor, Professor & HOD-

ME (Aug, 2004 to July, 2010).

Worked with Inderprastha Engineering College, Ghaziabad as Founder -Head of department

for Mechanical Engineering (Oct, 2001 to Aug, 2004).

Worked with Ajay Kumar Garg Engineering College, Ghaziabad as Founder-Head of

Department for Mechanical Engineering & member of Management committee, led the

institute for ISO-9000 certification as Management Representative

(Nov, 1998 to Sep, 2001).

Worked in different industries as R & D Engineer (July, 1996 to Nov, 1998).

Professional Credentials

Qualified Six-Sigma Black Belt from KPMG, India. (certificate no.1007437, April 05 to Sept

05)

Qualified Lead Auditor of ISO-9001 from BSI, India. (certificate no. 22783-61476, 3-7 Dec,

2001)

Qualified internal auditor of ISO-9001from ETDC, Mohali. (certificate no. CIA/11/02,

4/9/2001-6/9/2001)

Certificate trainer on CNC programming from MTAB-DENFORD.

QCI -Qualified Master Trainer on ZED.

Paper published in International Journals

Soti, A., Shankar, R. and Kaushal, O. P.(2010), “Modeling the Enablers of Six-Sigma using

Interpretive Structural Modeling”, Journal of Modeling in Management, Vol.5 No.2, pp. 124-

141.

Soti, A, Shankar, R. and Kaushal, O. P.(2011), “Modeling the Barriers of Six-Sigma using

Interpretive Structural Modeling”, International Journal of Business Excellence , Vol.4 No1,

pp.94-110.

Soti, A, Shankar, R. and Kaushal, O. P.(2011), “Six-Sigma in manufacturing sector in

India”- Global Business and Management Research: An International Journal, Vol. 3, No. 1.

Soti, A, Shankar, R. and Kaushal, O. P.(2012), “Six-Sigma with Innovation Tool Kit of TRIZ”,

International Journal of Business Innovation and Research, Vol 6, No.2, pp. 220-237.

Soti, A, Shankar, R. and Kaushal, O. P.(2012), “Six-Sigma in manufacturing for micro, small

and medium enterprises in India”- International Journal of Productivity and Quality

Management, Vol 9, No.1, pp. 61-81.

Soti, A., Kaushal, O.P. and Gupta, B. K. (2009), “Six-Sigma DMAIC Applications: A Case

Study of Engineering Education System”, International Journal of Manufacturing Science and

Technology, Vol. 3 No. 1, pp.107-119.

Soti, A. and Kaushal, O.P. (2009), “Determining the Essentials Characteristics of Six Sigma

Black Belts: Results from a Pilot Study in Indian Manufacturing Companies”, International

Journal of Mechanical Engineering, Vol. 2, No.1, pp. 31-36.

Soti, A., Shankar, R. and Kaushal, O.P.(2012) “Essential towards Excellency: Quality

Journey of EMI Group”, International Journal of Business Excellence, Vol. 5, No. 6, pp. 657-

676.

Soti, A. “Modeling of six-sigma project-goals, key-matrices and benefit-achieved with SEM”,

International Journal of Science, Technology & Management, Vol. 4, No. 1, pp. 552-563.

Paper in International/National Conference

“Measuring Innovation Process”, Proceedings of GLOGIFT 07, Nov 15-17, 2007 U P Tech

University, Noida, pp. 606-610.

“Integration of Six Sigma with TRIZ for Design Problems”, International Conference,

Engineering Design.in, 2007, IISc, Banglore.

“Quality through Process Management”, Emerging Trends in Mechanical Engineering:

Proceedings, Allied Publishers, NIT, Kurushetra held on 29-30 March, pp 461-463.

“Quality Management of Education through ISO” in NAAC sponsored National conference on

“Quality initiatives and best practices in teaching-learning & evaluation process” at D B

Science College, Gondia, Maharashtra held on 28 & 29 Jan 2005.

“Six-Sigma for Large Companies”, National Conferences on Challenges in 2020-Mechanical

Engineering perspective, held on 14-15 March, 2008, Mannampandal, Tamil Nadu, pp. 1-11.

“Six-Sigma Bottleneck and Remedies through TRIZ”, Proceeding of QRMAES-07, NIT,

Hamirpur, pp.66-72.

Paper Reviewer

Associate Editor for ISST Journal of Mechanical Engineering.

International Journal of Production Research.

International Journal of Modeling in Management.

The Energy

International Journal of Management Concepts and Philosophy (IJMCP)

Journal of Advances in Management Research

Benchmarking: an International Journal.

Research Interest

Quality Management System like Six-Sigma, Lean, Green manufacturing

Systematic Innovation

Operation Management & Industrial Engineering,

Productive research for MSMEs & Rural development

Seminar/FDP/Workshop conducted/attended

FDP conducted on Mechanics of Solids & Applications in KEC (5/6/17-9/6/17)

Delivered lecture on TRIZ in IDC training program at KEC.

Taken session on ‘how to write research paper’ in FDP at KEC.

FDP conducted on Total Quality Management in KEC (13/12/16-19/12/16)

Seminar conducted on Research Methods at RKGEC

FDP attended Experimental Techniques-A holistic Approach at RKGIT (19/6/2006-1/7/2006)

Attended workshop on Development of strategies for student centric teaching in Mechanical

Engineering on 15 Dec, 2007 at RKGIT

Participated in the Workshop on Capacity Building of Affiliated Institutes of GBTU, on Jan

17-18 at Lucknow.

Conducted Internal Auditor Training for ISO 9000 system at AKGEC.

DST sponsored INSPIRE program conducted at RKGEC three times.

Participated in ETME-2005 at Nit, Kurukshetra & presented paper ‘Quality through Process

Management’.

Presented paper in ICRTESM-15 at JNU convention center, New Delhi.

MSMEs sponsored training program conducted at RKGEC.

Participated in a workshop on "Interdisciplinary Research in Supply Chain Management (on

Feb 03, 2017) & Decision Sciences Applications in Business Practices (on Feb 04, 2017)" at

IITD.

Some of the Projects undertaken/Guided

UG level

Flux wastage reduction at ‘Modi -Electrode Ltd’.

Fixture design for Lindge gas cutting machine of L & T.

Innovative design of Hydraulic press with flywheel.

Fixture design for CNC grinding machine for Micromatics Grinding Ltd.

ISO-documentation for Engineering Education System.

Implementation of Six-Sigma (DMAIC) at RKGIT in teaching-learning process.

PG level : 2 Nos,

Ph.D.: 1 in progress

Professional Membership

Member of SAE

Founder member of ISST

Member of Institution of Engineers

Member of IAENG

Special Competence

Six-Sigma applications in manufacturing sector

Six-Sigma applications in service sector.

Systematic Innovation-TRIZ

Quality Management Systems

Pedagogy improvement

Faculty Profile

Prof. T. P. N. Singh

Professor

[email protected]


B.Tech in Mechanical Engineering from IIT, BHU in 1970.

Advanced Post Graduate Studies in Aero Space Engineering from Air Force Technical

College, Jalahalli, and Bangalore in 1972.

M.Tech in Industrial Engineering from NITIE (National Institute of Industrial Engineering,

Mumbai) in 1983.

Experience

Presently working as Advisor (Research and Development) and Professor in Mechanical

Engineering at Dronacharya Group of Institutions, Greater Noida from 15th July 2011.

Worked as Professor in Mechanical engineering at G.H.Raisoni College of Engineering,

Nagpur from 2003 to 2011

Worked as Chief of Production at HAL (Hindustan Aeronautics Limited) in the prestigious

Light combat aircraft project “TEJAS” in 2003

Worked as a Commissioned Officer in the Indian Air Force from 1971 to 2003 (32 years)

and retired as Chief Engineer (Aviation).Took active part in war in 1971 (Bangladesh) and

2000 (Kargil).

PaperPresentation/Publication

Role Conflict and Role ambiguity in an organization, published in Industrial engineering

journal 1982.

Cogeneration techniques, published in industrial engineering journal 1983.

Some studies in maintenance systems published in industrial engineering journal 1983.

Chapter on “Some students in maintenance system” included in the book on plant

maintenance by Ratnakar Gedam.

Life extension checks of Hunter aircraft published in Airclue Journal 1988, UK.

Nose oleo leg inspection, published in Airclue Magazine 1989, UK.

Thesis on “Extension of life for aircraft” published for Indian Air Force in 2000.

Conference/Seminars/Workshops

Attended more than 100 conferences in Air Force related to aircraft systems.

Organized two International conferences at GH Raisoni College of Engineering on Emerging

trends in engineering and technology in 2009 and 2010.

Led a team of senior faculty members from GH Raisoni College of Engineering to Dubai in

2010 and visited 20 colleges to attend conferences and ink MOU’s.

Organized National project competition, “Technoblast” at DGI, Greater Noida in 2012.

Attended workshop conducted by ORG (Observer research Group) on Higher Learning on 21

Dec 2012.

Participated in seminar conducted by PDI (Policy Development Initiative) on 23 Jan 2013.

mailto:[email protected]

Attended workshop conducted by Prof Douglas Cleaver of UK on Materials Modeling.

Participated in seminar conducted by FICCI and US embassy on “The next great

entrepreneur” on 31 Jan 2013.

Mentored students for National debate competition held at FICCI on 17 Apr 2013

Attended seminar on “Contemporary issues in human capital development” at IIT, Delhi for

Margdarshan awards.

Attended seminar on “National Technology day 2013” held at Vigyan Bhawan, New Delhi.

Attended workshop on “Design Science Research methods” at MTU on 22 May 2013.

Attended workshop on “Innovation in engineering & technology” at MTU on 09 Jul 2013.

Organized FDP at DGI, Greater Noida for 2013-2014 period.

Submitted 10 proposals relating to FDP,IIPC,EDC & Seminar grant to AICTE in Dec 2013

Organized “Entrepreneurship Meet” by Moser Baer and young entrepreneurs on 8 Jan 2014

Prepared and submitted 9 student driven projects to DST for Innovation and

Entrepreneurship Development Scheme in Feb 2014.

Submitted 8 proposals for Budding Innovators award to NRDC Feb 2014

Submitted proposal to SERB(DST) for young Scientist award in Feb 2014

Attended “Fluid Mechanics” workshop conducted by IIT,Delhi in June 2014

Obtained financial aid for 5 deserving students based on NEED and MERIT for full graduation

from RSG Information systems (P) Ltd.

Arranged stipendiary internship for students of 2nd and 3rd year at RSG Information systems

(P) Ltd.

A workshop was organized by CII & MSME at MSMEDI, New Delhi on 8th July 2016

pertaining to IPR and Commercialisation of Technology for Start-Ups and Incubatees.

Advisor (R&D), Prof. TPN Singh.

A workshop on “Ergonomics" was organized by DGI, Greater Noida in association with Dr.

Reddys lab on 17th March 2016.

Special Competency

Executive Editor of International Journal Engineering, Sciences & Management.

Erstwhile Principle Consultant-Raisoni Group of Institutions, Nagpur.

Reviewer of Flight Safety and Maintenance Journal, Indian Air Force

Editorial Board- Air Clue Journal, Indian Air Force. President- NGO, “AMAL” for providing

cheap and free medication to the under privileged.

Advisory Board- Silk & Fab Industry.

Faculty Profile

Mr. Manik Mittal

Assistant Professor

[email protected]


M.Tech (Thermal Engineering) from IIT (ISM), Dhanbad in 2017.

B.Tech (Mechanical Engineering) from Maharishi Markandeshwar University, Mullana with

Distinction in 2013.

Professional Certifications

APVC certified Programming in C++.

Experience

Presently working as Assistant Professor in Mechanical Department at Dronacharya Group of

Institutions, Greater Noida from 20th July 2017.

Paper Presented/Publication

M.Mittal and S.Sen. Transverse- only vibrations of an elliptical cylinder with major axis

parallel to flow. In proceedings of Conference of Mechanical Engineering and Technology, IIT

(BHU), Varanasi, India, 8th April 2017.


Faculty Profile

Mr. Ajay Singh Verma

Assistant Professor

[email protected]

EDUCATIONAL QUALIFICATION

Ph. D. from Punjab Engineering College (Deemed to be university), Chandigarh.

M. Tech. from Punjab Engineering College (Deemed to be university), Chandigarh.

B. Tech. from Kurukshetra University, Kurukshetra.

WORK EXPERENCE

Presently Working as Assistant Professor in ME Department of Dronacharya Group of

Institutions, Greater Noida from February 2018.

Worked as an Assistant Professor in Sharda University, Gautam Buddha Nagar, Greater

Noida.

Worked as maintenance cum project engineer in project with Confidence Petroleum

India Ltd. Atchutapuram (Visakhapatnam) under UTL group, is manufacturing unit of

CNG & LPG Cylinders.

Worked as a Maintenance cum Project Engineer in Project with Jay Fe Cylinders Ltd.

(Minda Group) Bawal ( Rewari ) under UTL group, is manufacturing plant of CNG

cylinders.

Worked as a shift in charge in CGL, CCL, CTL, Corrugation line, Mechanical

(maintenance) department with Vardman Industries Ltd., Rajpura (Patiala) under UTL

group.

Paper Presented/Publications

Verma, A. S., Suri, N. M., & Kant, S. (2017). Applications of bauxite residue: A mini-review.

Waste Management & Research, 35(10), 999-1012.

Kant, S., & Verma, A. S. (2017). Stir Casting Process in Particulate Aluminium Metal Matrix

Composite: A Review. International Journal of Mechanics and Solids, 9(1), 61-69.

Jawalkar, C. S., Verma, A. S., & Suri, N. M. (2017). Fabrication of aluminium metal matrix

composites with particulate reinforcement: a review. Materials Today: Proceedings, 4(2),

2927-2936.

Verma, A. S., & Suri, N. M. (2015). Corrosion behavior of aluminum base particulate metal

matrix composites: A review. Materials Today: Proceedings, 2(4-5), 2840-2851.

Singh, J., Suri, N. M., & Verma, A. (2015). Affect of mechanical properties on groundnut

shell ash reinforced AL6063. International Journal for Technological Research in

Engineering, 2, 2619-2623.


Verma, A. S., Kant, S., & Suri, N. M. (2013). Modelling of Process variables for fly ash based

Al-6063 composites using Artificial Neural Network. International Journal of Scientific and

Research Publications, 3(5), 1-5.

Verma, A. S., Suri, N. M., & Kant, S. (2012). Effect of Process parameter of AL-6063 based

fly ash composites using Taguchi. International Journal of Applied Engineering Research,

7(11), 2012.

Book/Chapter Publication

Verma, A.S. (2017a). Corrosion mechanism and Inhibitors for Al based particulate metal

matrix composite (APMMCs). In Esther Hart (Eds.). Corrosion Inhibitors principles,

mechanisms and applications (pp. 105-115). New York, Nova Science Publishers, Inc.

National & International Conference/Workshops/Seminars

Attended short term course on Advanced Materials & Characterization organized by

Department of Physics, NIT Kurukshetra 08-12 June 2015.

Attended short term course on Design of Experiments & its Applications in Research

organized by Department of Production & Industrial Engineering, PEC University of

Technology Chandigarh on 12 -16 Jan 2015.

Attended FDP on Health, Environment & Nanotechnology organized by Dr. S.S. Bhatnagar

University of Chemical Engineering & Technology, Punjab University on 04-09 Aug 2014.

Attended FDP on Vehicular & Transport Ergonomics organized by Center of Excellence in

Industrial & Product Design, PEC University of Technology Chandigarh on 20-24 April 2014.

Attended short term course on Welded Structure Design & Quality Control organized by

Department of Mechanical & Industrial Engineering, IIT Roorkee on 14-16 Dec 2011.

Special Competency

MHRD Assistantship during M.E. and Ph.D Program., GATE qualified.

Faculty Profile

Mr. Harshit Kumar

Assistant Professor

[email protected]

Education Qualification

M.Tech (Design & Production Engineering) from G.B Pant University of Agriculture &

Technology, Pantnagar, in 2015.

B.Tech (Mechanical Engineering) from R.K.G.E.C., U.P.T.U Lucknow, in 2012.

Experience

Presently working as Assistant Professor in Mech Department at Dronacharya Group of

Institutions from 25th July 16.

Worked as Assistant Professor in Mechanical Department in International College of

Engineering, Ghaziabad From 15th July 2015 to June 2016.

Worked as Lecturer in International College of Engineering, Ghaziabad From 30th July 2012

to 4th August 2013.

Workshops/Seminars/Conferences

Attended All India Seminar on ‘Emerging Technology for Sustainable Resource

Management’, organized by Institutions of Engineers (India), Pantnagar from 12th to 14th

June 2014.

Special Competency

Qualified in GATE 2016




Faculty Profile

Mr. Ajay Chaubey

Assistant Professor

[email protected]

Educational Qualifications

M. Tech in Mechanical Engineering from Information Institute of Technology & Design

Manufacturing , Jabalpur in 2014.

B. Tech in Mechanical Engineering from IIMT college of Engineering, UPTU University,

Lucknow in 2009.

Professional Certification

Mechanical software - Auto CAD, Pro-E 3.0, ANSYS12.0, Solidworks-12.0, Mat Lab (R2010a)

and LAB VIEW.

Experience

Presently working as Assistant Professor in Department of Mech Engineering of

Dronacharya Group of Institutions, Greater Noida from 2nd Jan, 2017

Working as Assistant Professor in Mechanical Engineering Department, Meerut Institute of

Engineering and Technology from July 2014 to December 2016.

Working as Lecturer in Mechanical Engineering Department, Meerut Institute of Engineering

and Technology from February 2010 to December 2011.

Working as Site Engineering, BBR India Pvt. Ltd. from August 2009 to February 2010.

Research/Paper Publication/Presentation

Ajay Chaubey, Rohit Kumar, Anil Kumar Yadav, Pramod Singh, “A Case Study on

Nanotechnology and its Application”, “oral presentation at National Conference on Recent

Trends in Electronics (NCRTE-2011))”, conducted by the deptt. of Electronics &

Communication Engineering, at Vidya College of Engineering Meerut.

Ajay Chaubey, H.Chelladurai (2014),“Condition monitoring of rotating shaft using virtual

instrumentation” , International Conference on All India Manufacturing Technology, Design

and Research Conference)”, conducted by the deptt. of Mechanical Engineering, at IIT

Guwahati India.

Ajay Chaubey , “Comparison of Regression Analysis and Applications of Artificial Neural

Network in Assessing Water Quality: A Case Study”, Proceedings of the India International

Science Festival- Young Scientists’ Meet Department of Science and Technology,

Government of India – Dec 4-8, 2015 Paper Code: WATER 2.

Conference/Seminar/Workshop

National Conference on Recent Trends in Electronics (NCRTE-2011), conducted by

the deptt. of Electronics & Communication Engineering, at Vidya College of Engineering

Meerut.

India International Science Festival- Young Scientists’ Meet Department of Science and Technology, Government of India.

Faculty Profile

Mr. Brijesh Verma

Associate Professor

[email protected]


M.E. Production & Industrial Sys. University of Roorkee, in 2000.

B.E. Mechanical, Bundelkhand University, in 1998.

Profession Certification

AutoCAD certified professional: AutoCAD 2014 00363900

Experience

Presently working as Associate Professor in Mechanical Department at Dronacharya Group

of Institutions, Greater Noida, from 25th September 2006

Worked as a senior lecture at SIET Greater Noida from 18th August 2005 to 24th September

2006.

Worked as a lecture at IEC CET Greater Noida from 13th Aug 2004 to 18th August 2005

Worked as a lecture at BIET & RC Jhangirabad from Jul 2000 to 13th Aug 2004.

Paper Publications / Presentation

National Conference on “Power Plant Engineering” at M.I.E.T. Bulandshahr titled “Nano

factory -A personal desktop factory” Sept. 2007

Presented paper on “Biomachining : A new paradigm in manufacturing” under FDP at DGI

Greater Noida : Jul –Aug 2012

Presented paper on “Rapid Prototyping” in Faculty Development Program at DGI Greater

Noida: Jul –Aug 2013.

Presented Paper on “Process Variables Optimization for Dimensional Accuracy of Small Size

G.I. Castings Produced by V-Process” 11th National Conference, IPRoMM- 2014.

Process Variables Optimization for Surface Finish of Small Size G.I. Castings Produced by V-

Process; International Conference on “Energy Technology, Power Engineering &

Environmental Sustainability” on 21st 22nd June, 2014 at Jawaharlal Nehru University, New

Delhi. ”.

Pedal Controlled Washing Machine; International Conference on “Energy Technology, Power

Engineering & Environmental Sustainability” on 21st 22nd June, 2014 at Jawaharlal Nehru

University, New Delhi.

Conferences/ Seminars / Workshops

Attended in seminar on “Mechanical system Design” at N.I. E. C Lucknow, Feb 2004.

Attended in one day National Workshop on the “Use and Deployment of WEB Video courses”

under NPTEL at I.I.T. Delhi: 2007.

Attended in seminar National Seminar on “Fatigue and Fracture” at DCE Gurgaon: Jan 2007

Attended in National Seminar on “Mathematical Modelling of Some Physical System(MMSPS-

2009)” at DCE Greater Noida: Jan 2007

Attended in seminar on “Recent Developments in Mechanical Engineering”. at DGI Greater

Noida:2008

Attended an Awareness Training Programme on “ISO 9001:2008 and ISO 14001:2004” on

21st July 2009

Attended in Faculty Development Program on “Innovative and Effective Teaching

Methodology for Engineering Mechanics” by UPTU Lucknow: 18-22 September 2010.

Attended one day seminar on “Contemporary Issues in Human Capital Development

Inspection & Road Ahead “at IIT Delhi.

Attended in one day workshop on “Statistical Product and Service Solutions” at DGI Greater

Noida:30th Nov. 2013

Worked as a Research Scholar under “Summer Faculty Research Fellow (SFRF)” at IIT Delhi,

16th May -16 Jul.2014

Attended “Two Weeks ISTE Main Workshop on Fluid Mechanics” from 20th May to 30th

May 2014 under National Mission on Education through Information and Communication

Technology, MHRD, Govt of India

Attended Five day workshop on “Strategic Management of NSQF, Community Colleges and

Skill Development Scheme” Conducted by NITTR Chandigarh 23-27 June 2014.

Attended Confederation of Indian Industry (CII) International Conference on Revolutionizing

the auto industry “Impact of Innovation on the Growth Curve” on 16th July 2014 at

Gurgaon.

Attended “I –BHARAT- 2014” (Capturing the Domestic ICT Potentional-Unleashing the Next

Wave) on 1st Aug. 2014 at FICCI New Delhi

Attended two day national e-seminar on “Step 2 Research” on 19-20 September 2014.

Attended seminar on five day training Programme on “Climatic Change and Diaster

Management” at DGI Greater Noida on 16-21 November. 2014

Attended “Faculty Development Workshop on Mechanical Engineering” on 15-16 Nov. 2014

at Skyline Institute of Engineering & Technology, Greater Noida

Attended “Two Weeks ISTE Main Workshop on Control System” from 2nd Dec. to 12 Dec.

2014 under National Mission on Education through Information and Communication

Technology, MHRD, Govt of India

Attended “Two Weeks Workshop on “Introduction to Finite Element Analysis” from 2nd May

to 16 May. 2015 Sponsored by AICTE held at Dronacharya Group of Institutions, Greater

Noida

Attended “Two Weeks ISTE Main Workshop on Environmental Studies” from 2nd Jun. to 12

Jun. 2015 under National Mission on Education through Information and Communication

Technology, MHRD, Govt of India.

Attended in Five days Short Term Course on “Communication Skills” conducted by NITTETR

Chandigarh at DGI Greater Noida from 20th -24th Jul 2015.

Attended in five days Short Term Course on “ISTE short Terma Training Program on

Technical Communication conducted by IIT B Under the aegis of NME-ICT MHRD from 8th

oct. -5 Dec. 2015.

Attended in Five days Short Term Course on “Instructional Planning and Delivery (Module

III: Student Evaluation)” conducted by NITTETR Chandigarh at DGI Greater Noida from 16th

-20th Nov. 2015.

Attended in Five days Short Term Course on “Climate Change, Disaster Management and

Sustainable Development “conducted by NITTR Chandigarh at DGI Greater Noida from 11th

Jan-15th Jan 2016.

A one day workshop on "Mold making & Casting" was organised by Innovative Engineers in

collaboration with MSME_TDC, Agra at Dronacharya Group of Institutions, Greater Noida on

20th July 2016

Attended Four weeks AICTE approved FDP on “'Use of ICT in Education for Online and

Blended Learning” was organized by IIT Bombay, during 2nd May -10th July 2016

Attended QEEE Session on “GEAR: Kinematics and Dynamics of Machinery / Theory of

Machines” was organized by IIT Madras under D2S (Direct to Student) Program at

Dronacharya Group of Institutions, Greater Noida during 9th, 14th and 20th September

2016.

Professional Memberships

The Indian Society for Technical Education (ISTE) Life member Id LM 77030

International Association of Engineers (IAENG) Membership No: 113705

International Association of Computer Science and Information Technology (IACSIT)

Membership No. 80346106.

Member of UAMAE

Member of TCS Academic Interface Programme

Member of D-link academy

Special Competency

“Modified Double Cylinder Hand Pump” has been submitted for patents.

“Efficient Mechanical rickshaw” has been submitted for patents.

Faculty Profile

Mr. Gaurav Siwal

Assistant Professor

[email protected]


M.Tech (Engineering Physics) From Guru Gobind Singh Indraprastha University (New Delhi)

in 2013

B.Tech (Mechanical And Automation) From Guru Gobind Singh Indraprastha University

(New Delhi) In 2011.

Professional Competency

Automation Course From Anax Projects & Development

Experience

Presently Working As Assistant Professor In Mech Departmentr At Dronacharya Group Of

Institutions, Greater Noida, From 2nd Feb 2015.

Worked as GET (Production) At Calcom Vision Limited. From 6th Nov 2013 To 7th May 2014).


"REVIEW ON ENERGY STORAGE TECHNOLOGIES FROM THE VIEW OF STORING SOLAR

ENERGY" At International Conference On Latest Advances In Technology, Management And

Applied Sciences. IIMT, Greater Noida.


Attended One Week Short Term Course (STC) On “MATERIALS AND PROCESSES FOR HIGH

TEMPERATURE APPLICATIONS” Was Organized By IIT ROORKEE, From June 6 To June 10,

2016

Attended Faculty Development Program On FEA Organized By AICTE And Conducted By

Dronacharya Group Of Institution, Greater Noida.

Attended International Conference On “Latest Advances In Technology, Management And

Applied Sciences” Was Organized By IIMT, Greater Noida On February 20th 2016.

Attended Confederation Of Indian Industry (CII) Organized The Industrial Automation

Summit: “Managing Today Operational Challenges And Being Ready For Tomorrow’s

Growth” On 4th December 2015

Attended One Day Seminar On “Engineering Education And Research” Was Organized By

National Instruments At Hotel Park INN, Gurgaon On 30th July 2015

Attended Short Term Course On “Matlab Based Optimization And Statistical Data

Processing” Organised By MNNIT, Allahabad.

Attended Short Term Course On “Communication Skills" Organized By NITTR Conducted By

Dronacharya Group Of Institutions, Greater Noida.

Attended Short Term Course On “Instructional Delivery And Student Evaluation " Organized

By NITTR Conducted By Dronacharya Group Of Institutions, Greater Noida.

Attended Short Term Course On “Engineering Physics” Organised By ISTE Conducted By

Dronacharya Group Of Institutions, Greater Noida.

Attended Seminar On “Climate Change, Disaster Management & Sustainable Development”

Organised By NITTTR Conducted At Dronacharya Group Of Institutions, Greater Noida.


IAENG (International Association For Engineers)

IACSIT (International Association For Computer Science And Information Technology)

UAMAE (Universal Association Of Mechanical And Aeronautical Engineers)

ISTE ( Indian Society For Technical Education)

Faculty Profile

Mr. D. V. Bhise

Associate Professor

[email protected]


Studying Ph.D from Amravati University, Amravati. Maharashtra.

M.E. (Advanced Production System) from R.G.P.V, Bhopal, with honors. in

2003.

B.E. (Production Engineering) from Amravati University, Amravati, in

1997.


Auto -DESK Certified Professional Trainer AutoCAD 2014

Microsoft Certified Office Specialist: MS Word

Microsoft Certified Office Specialist: Power point.

Successfully completed Certification on “Linux”, “Latex”, “Python”, “Scilab”, “C”, “C++”.

Teaching Experience

Presently working as Associate Professor in Mech Department in Dronacharya Group of

Institutions, Greater Noida, since August 2008.

Worked as Assistant Professor in Mech Department, in Amity School of Engineering Noida

from, September 2005- July 2007.

Worked as Coordinator of Mechanical Engineering Department at School of Engineering &

Applied Sciences (SEAS), Delhi during August 2004- July 2005.

Worked as Lecturer in Mech Department in B.N. College of Engineering from Aug 1997 to

June 2001.


Bhise Dattatraya, Sunnapwar Vivek, “Developing Theoretical frame work for effective

implementation of industry academia collaboration”, 45th ISTE Annual National Convention

and International Conference on “ Challenges & Opportunities in Technical Education in the

era of sustainable development” HVPM, Amravati, 9-11 January, 2016.

Bhise Dattatraya, Sunnapwar Vivek, “Implementation of advanced manufacturing in small

and medium sized enterprises: An imperial study” 3rd International Conference on

Industrial Engineering (ICIE-2015) & 57th National Convention of Indian Institution of

Industrial Engineering at Sardar Vallabhbhai National Institute of Technology, Surat, 26-28

Nov. 2015.

Bhise Dattatraya, et al. “Design & Development of Labourer Load Reducer” India

International Science Festival, IIT Delhi, 4-8 December, 2015.

Bhise Dattatraya, “Attaining Manufacturing Sustainability through Cycle Time Reduction: A

Case Study” International Conference on Energy Technology, Power Engineering and

Environmental Sustainability (ETPEES-2014), JNU, Delhi, 21-22 June 2014.


Bhise Dattatraya, Sunnapwar Vivek “Globalisation and Its Impact on Innovation in SMEs,

International Conference on Manufacturing Sustainability, BITS Pilani, December 2012.

Bhise DV, “Measurement of Ring Gauge dimension by optical method and image processing”

International Journal of Engineering Sciences and Management, Vol. II, Issue I, Jan-

June’2012, pp 28-32, ISSN 2231-327

Bhise DV, “Application of Madam Using AHP For The Justification Of Material And Process

Selection” International Journal of Engineering Sciences and Management, Vol. III, Issue 1,

Jan-June’2012, pp 28-32, ISSN 2231-327on Jan-June’2013,

Bhise DV “Defect Minimization by using problems solving tools: A Case Study”, International

Journal of Engineering Sciences and Management (ISSN No. 2231-3273), Vol-II/ Issue-II/

Jul-Dec 2012, pp 81-87

Bhise Dattatraya, Sunnapwar Vivek “Adoption of Advanced Manufacturing Technologies in

Small and Medium Enterprises”, International conference on Production and Industrial

engineering organized by NIT Jalandhar. (22-24 March 2007).

Bhise Dattatraya, Sunnapwar Vivek, “Technology Investment Decision Process:

Classification of the Issues”,National conference on Trends and Advances in Mechanical

Engineering (TAME 2006) held at YMCA, Faridabad (9-10th Dec 2006.)


Attended the panel Discussion conducted by NITTTR Chandigarh as a Panelist on “Quality

of Instruction” on 18 November 2016

Participated in 4 weeks STTP on "Use of ICT in Education for Online and Blended learning"

conducted by IIT Bombay at DGI Greater Noida from 24 May to 10 July 2016.

Attended one week workshop on “Climate Change, Disaster Management and sustainable

Development” Conducted by NITTTR Chandigarh at DGI Greater Noida during January 11th -

15th, 2016.

Attended one week workshop on “Instructional delivery and student evaluation" Conducted

by NITTTR Chandigarh at DGI Greater Noida 16th – 20th, November 2015.

Participated in AICTE sponsored Two Week Faculty Development Program on “Introduction

to Finite Element Analysis”, at DGI Greater Noida during May 2nd - 16th, 2015.

Attended one week workshop on “Climate Change, Disaster Management and sustainable

Development” Conducted by NITTTR Chandigarh at DGI Greater Noida, November 17th -

21st , 2014.

Attended Two day ISTE e-Seminar on Steps 2 Research organized by Department of

Computer Science, Amal Jyothi College of Engineering, Kanjirappally, Kerla on 19th -20th,

September 2014.

Attended one week workshop on ‘Strategic Management of NSQF, Community Colleges &

Skill Development Scheme’ by NITTTR Chandigarh at DGI Greater Noida, June 23rd – 27th

2014.

Attended One Week ISTE Workshop on Fluid Mechanics conducted by IIT Kharagpur, May

20th - 27th, 2014 through NMEICT.

Attended One Week ICT based Short Training on “Faculty Induction Program” conducted by

NITTTR, Chandigarh, at DGI, Greater Noida, January 13th - 17th, 2014

Delivered Lecture in FDP Program on “Strategies for Effective Teaching Learning” held in

July 2013.

Participated in Mission 10X Workshop conducted by Wipro in coordination with ISTE, during

27 September to 1st October 2011.

Attended a national seminar on Fatigue, Fracture & Wear of metals Dronacharya College of

Engineering Greater Noida on 3rd April 2010.

Attended one day ISO certification Programme on ISO awareness at Dronacharya Group of

Institutions, Greater Noida on July 21, 2009.

Attended a national seminar on Transformation of Energy Resources and Applications at

Dronacharya College of Engineering, Greater Noida on July 18, 2009.

Attended two day workshop on “Pro- Engineer (Wildfire 2.0)” at Rolta India, New Delhi

during July 22nd – 24th , 2004

Attended “Faculty Development Programme” Sponsored by Department of Science &

Technology (DST), Govt. of India, New Delhi at S.A.T.I. Vidisha (M.P.) during December 3rd

- 19th , 2001

Organized Fourth State & National conference on “Towards Excellence in Engineering

Education in 21st Century”, at BN College of Engineering, Pusad in November 1999.

Attended a National seminar on “Two Wheelers of Tomorrow”, held at BN College of

engineering, Pusad (M.S.) during January 29th -30th, 1999.

Attended National level workshop on “Design of Machines and Mechanisms”, January 1998,

held at BN college of engineering, Pusad (M.S.)

Projects Guided at UG Level

Design of Auto move weeding and earthing machine.

Design and manufacturing of a go-cart.

Design & manufacturing of a sugarcane cutter

Design & development of Labourer Load Reducer


Life member of Indian Society for Technical Education (ISTE)

Member of IEEE

Life member of Indian Institution of Industrial Engineering (IIIE)

Life Member of International Association of Engineers (IAENG).

Life member of TCS academia

Member of D-Link Academic Community

Life member of UAMAE

Faculty Profile

Mr. Girish Chandra

Assistant Professor

[email protected]

Educational Qualifications

M. Tech in Manufacturing Technology from NIT CALICUT KERALA first division, in 2016.

B. Tech in Mechanical Engineering from B.T.K.I.T Dwarahat Almora first division in 2012.

Experience

Presently working as Assistant Professor in Mechanical Department in Dronacharya Group

of Institutions, Gr. Noida from 9th Feb., 2017.

Trainings and Certification

Vocational Training of one month in B.H.E.L. Haridwar Uttarakhand.

One Month Training of CATIA in CETPA INFOTECH.

Faculty Profile

Mr. T. Bothichandar

Associate Professor

[email protected]


M.E (Industrial Engineering & Management) from SGSITS, Indore (MP) in 2003.

B.Tech (Aeronautical) from Madras Institute of Technology, ANNA University, Chennai in

1997.

B.Sc. (Mathematics) from Govt.Arts College, Madras University in 1992, Tamilnadu.

Professional Certification

Certification on “Linux”, “Latex”, “Scilab”, “C”, “C++”

MOS Certification on MS Word and MS PowerPoint.

AutoCAD certified professional: AutoCAD 2014.

Experience

Presently workingas Associate Professor in Mech Department in Dronacharya Group of

Institutions, Greater Noida, from 1st Sept, 2008.

Worked as a Senior Lecturer in Lingaya’s Institute of Management & Tech, Faidabad from

2006 to 2008.

Worked as a Lecturer in PDMCE, Bahadurgarh, Haryana from 2004 to 2006.

Worked as a Piping Engineer in L&T ECC Division Panipet Refinery, Panipet, from March

2004 to May 2004.

Worked as a Marketing cum purchase officer” in NPG Chennai., from 2003 to 2004

Worked as a Project Graduate Trainee Programme in Structural Integrity Division, NAL

Bangalore., from2000 to 2001.

Publications/Presentations

International Journal of Engineering Sciences & Management,Vol.3,Issue Jan-June’2013

Topic on Self Balanced Two Wheeled Pendulum, page No,37, DGI, Greater Noida, India.

International Journal of Applied Engineering Research, Vol:9 2014, June’ 2014 Topic

on Air cooling by repeated humidification and dehumidification, Jawaharlal Nehru

University, New Delhi.

International Journal of Innovative Research in Science and Engineering (ISSN:2454-9665)

Vol:02,Issue 05,May2016 Topic on Simulation of Hybrid Solar PV/Diesel plant with battery

storage, India International Centre, New Delhi.

International Conference on MANFEX in March 2012, AMITY University, Noida Topic on

Spoke-less Bicycle Design & Fabrication.

International Conference on Mechanical System in Aug 24, 25 - 2012 at KITE Ghaziabad,

Topic on Automatic Water Sensing Wiper.

International Conference on Automation and Mechanical System in March 21,22-2013 at

Lingaya’s University, Faridabad ,Topic on Self Balanced Two Wheeled Pendulum.

International Conference on “Contemporary issues in Engineering & Technology” at

Merchant Education campus, Basna, Mehsana, Gujarat during 19th to 21st march 2014. Topic

on “Four wheel Electrical car for handicapped”.

International Conference on “Energy Technology, Power Engineering & Environmental

Sustainability” on 21st 22nd June, 2014 at Jawaharlal Nehru University, New Delhi. Topic on

“Air cooling by repeated humidification and dehumidification”.

International Conference & Exhibition on Cutting Edge Technology Challenges in Mechanical

Engineering, held on 21st &22nd March 2015,at NIET, Greater Noida. Topic on “Theoretical

Analysis of Single Solar Cell (SSC) of Fin type Hybrid Photovoltaic (PV) Panel’s in-built Heat

Extraction Mechanism for Maintaining the Electrical Efficiency”

National Conference on Sustainable Solid Management-An Innovative Approach , held on

15th Jan 2016 at Dronacharya College of Engineering, Gurgaon. Topic on “Waste

Management through Conversion of Dry Leaves, twigs, grasses, cow dung into fire fuel”

International Conference on Latest Advances in Technology, Management and Applied

Sciences, held on Feb20, 2016 at IIMT College of Engineering, Greater Noida. Topic on

“Review on Energy Storage Technologies from the View of Storing Solar Energy”.

International Conference on Science, Technology and Management, held on 15th May 2016

at, India International Centre, New Delhi. Topic on “Simulation of Hybrid Solar PV/Diesel

plant with battery storage”.

Conferences/Seminars/Workshops

Attended Confederation of Indian Industry (CII) International Conference on revolutionizing

the auto industry “Impact of Innovation on the Growth Curve” on 16th July 2014 at Hotel

Leela Ambience, Gurgaon.

Undergone the flight training consisting of In-flight experiments on glider and Cessna air

plane from January 10-19, 1996 at the flight laboratory of Aerospace Engineering, IIT

Kanpur

Undergone the short term training programme on CNC MACHINE conducted by the

Mechanical Engineering department from 12-16 July 2004 at NITTTR, Chandigarh

Participated in the two day workshop on Computer Integrated Manufacturing System (CIMS)

organized by Indira Gandhi Institute of Technology, Delhi held during March 27-28, 2008

Participated in a Mission 10X workshop conducted at Dronacharya college of Engineering,

Greater Noida from 27th September to 1st October 2011

Participated in “Smart Materials” workshop conducted by NIT, Trichy, Tamil Nadu from 11th

to 15th June 2012.

Participated in one day national seminar “Cluster Development” organized by Indian

Industries Association, Greater Noida on 28th July 2012

Participated in “Dissemination workshop on National Mission on Education through

Information and Communication Technology” (NMEICT) for AICTE approved Engineering

college of NCR on 8th October 2013 at Le Meridian, New Delhi

Attended One day Workshop on Statistical Product and Service Solutions at Dronacharya

Group of Institutions, Greater Noida on 30th Nov 2013.

Participated two week Workshop on Fluid Mechanics, on “National Mission on Education

through Information and Communication Technology” (NMEICT) and IIT Kharagpur from

20th May- 30th May 2014.

Attended Workshop on strategic management of NSQF, community colleges and skill

development scheme Conducted by-NITTR, Chandigarh on 23-27 June 2014

Attended Two day Workshop on Introduction to Robotics Under the e-Yantra Lab setup

Initiative (eLSI) MHRD (New Delhi) 4th-5th August 2014 at MGM Noida.

Attended One day Workshop on Recent Metallurgical Innovations at USO House, New Delhi.

(MSME Agar Division) on 24 August 2014.

Attended Two day ISTE e-Seminar on Step 2 Research organized by Department of

Computer Science, Department of Computer Applications Amal Jyothi College of

Engineering ,Kanjirappally in association with ISTE Kerala Section and CSI Cochin Chapter

on 19-20 ,September 2014.

Attended One day workshop on Microsoft Technology Enriched Instruction by Microsoft in

Education at GD GOENKA UNIVERSITY, Gurgaon on 17th Nov 2014.

Participated two weeks AICTE Approved Faculty Development Programme on Introduction to

Finite Element Analysis during 2nd -16 th May 2015 organized and Conducted by

Dronacharya Group of Institutions, Greater Noida.

Participated One week National Workshop on CNC Machines and Robotics -2015 during 15th

-19th June 2015 at Department of Manufacturing Engineering, College of Engineering

Guindy, Anna University Chennai.

Participated One week Short term training Programme on “Communication skills” from 20-

july-2015 to 24-july-2015 conducted by NITTTR, Chandigarh.

Attended Confederation of Indian Industry (CII) organized the Industrial Automation

Summit: “Managing Today Operational Challenges and Being Ready for Tomorrow’s Growth”

on 4th December 2015

Participated in AICTE recognized Short term Course on” Climate Change, Disaster

Management and Sustainable Development” from 11-Jan-2016 to 15-Jan-2016 conducted

by NITTTR, Chandigarh.

Participated in Four week AICTE Faculty Development Programme on "Use of ICT in

education for online & blended learning" conducted by IIT Bombay, from 2nd May 2016-17th

July 2016

Professional Membership

The Indian Society for Technical Education (ISTE) Life member Id LM 78793

International Association of Engineers (IAENG) Member No: 103262

Member of TCS Academic Interface Programme

Member of D-Link Academy

Special Competency

Nomination for the Pearson Teaching Awards 2014.

Best Faculty Award 2010-11, DCE, Greater Noida.

Faculty Profile

Ms. Sushila Mishra

Assistant Professor

[email protected]


Masters in Maintenance Engineering (ME) from Maulana Azad National Institute of

Technology, Bhopal in 2010.

Bachelor Degree in Industrial & Production Engineering, from Govt.Engg Collage Jabalpur in

2007.


Certification on “Linux”, “Latex”, “Scilab”, “C”, “C++”

Successfully completed MOS Certification on MS Word and MS PowerPoint.

Experience

Assistance Professor in Mechanical Engineering Department DGI, Greater Noida from 9th

Sept 2011.

Six months experience in Arihant refrigeration (dealer of blue star) as a planning Egg.

Six month experience in first source solution in Indore.

Paper Presented/Publications

A journal on “Biodiesel; An alternative approach” at IOSR. Though accepted, publication is

due.


Attended “US- INDIA Workshop on Best Practices for Women in Science”, held on December

2012, New Delhi.

Attended one week workshop on fluid Mechanics at IIT Kharagpur

Worked as workshop coordinator in 10 day workshop on “Fluid Mechanics” conducted by

IIT Kharagpur.

Attended 5 day workshop on “STRATEGIC MANAGEMENT OF NSQF, COMMUNITY

COLLEGES AND SKILL DEVELOPMENT SCHEME” Conducted by NITTR Chandigarh.

Attended a webinar conducted by NEN on “Orientation to Entrepreneurship” for Faculty.

Faculty development program on FEA organized by AICTE and conducted by Dronacharya

group of institution, Greater Noida.

Short term course on “communication skills" organized by NITTR conducted by Dronacharya

group of institutions, Greater Noida.


ph.d. (mechanical) on ‘modeling and analysis of six sigma ... · qualified lead auditor of...

Documents