pharmaceutical guidelines_iso, fda, usfda, ich, who, gmp, mhra guideline, validation protocol, sops_...
TRANSCRIPT
-
28/05/2012 Pharmaceutical Guidelines:ISO, FDA, USFDA, ICH, WHO, GMP, MHRA guideline, Validation Protocol, SO
1/4C://Pharmaceutical Guidelines ISO, FDA, USFDA, ICH, WHO, GMP, MHRA guideline, Validation Protoc
Home Quality Control Quality Assurance Microbiology Production Your Articles Download Guidelines
Search
Upcomming Articles: FDA regulations clinical trials, FDA validation guidelines, 21 cfr part 11 compliance, GMPcompliance, FDA compliance, FDA audit, Pharma manufacturing, Regulatory affairs, Medical device validation, GMPvalidation, 21 cfr part 820, Regulatory affairs, Clinical trial FDA, HPLC Method Validation, FDA validation, ValidationControl, Regulatory compliance, HVAC validation, Water system.
Search Here
Custom Search
GMP Audit Check List- Filling and Packaging
1. Do the packaging operations proceed following the instructions and using the specified materialsdescribed in the Master Packaging Procedure?
2. Are the details of the operation recorded on the Batch Packaging Record?
3. Is only one product batch and packaging size on a line at any given time?
4. Are all deliveries of bulk product and packaging components checked and verified for their correctnessagainst the Master Packaging Procedure of other specific order?
5. Is the first precoded packaging compound checked on the correctness of the printed codes?
6. Are components allocated for pre-coding stored in sealed containers within an appropriate area forproper security and segregation?
7. Does pre-coding of components take place in an area isolated form other packaging operations?
8. Are all pre-coded components checked against the correctness before transfer to packaging?
9. Are there procedures describing
a. receipt and identification of bulk ,packaging components?
b. proper control to assure the correct, printed and unprinted packaging component used?
c. the required in-process control?
d. the reconciliation of bulk products and printed packaging materials?
final package examination?
Line clearance
10. Before a packaging operation starts, are checks carried out to ensure that work area andequipment are clean and free form
a. any products?
b. product residues? Or
c. documents not required for that operation?
11. Is an inspection conducted of each line prior to packaging to ensure
Monday, May 28, 2012 at 2:10:51 PM
Enter your email here...
Submit
Follow @pharmaguideline
Click on Like to Join Pharmaguideline
If you are associated with pharmaceutical profession i.e. quality control, quality assurance, regulatory affairs or pharmaceutical production then you need to know about recent updatesabout pharmaceutical guidelines. We provide you these updates about cGMP, WHO, USFDA, ICH, MCC, TGA, MCA, MHRA, Schedule M, clinical trials and all other regulatory pharmaguidelines 2012, pharma product formulation development. It will help to all pharmaceutical professionals and freshers who want to enter in pharmaceutical profession. Freshers will also
get calibration of all instruments and equipments and other useful information. We regularly write over this site on all pharmaceutical topics on Production, Quality Control, Qualityassurance and regulatory affairs. We also cover the pharmaceutical validations and qualifications, Pharmaceutical Production SOPs and Current Good Manufacturing Practices in
pharmaceutical production. So, keep watching this site regularly.
USFDA guidelines, GMP guidelines, WHO guidelines, Schedule M, FDA, European guidelines cleaning validation, process validation, water system
validation, ICH guidelines, GMP audut compliance, equipment qualification, Installation Qualification, Operational Qualification, Performance
Qualification, Calibration, Validation Protocol, SOPs etc.
Integrated ELN/LIMS R&D and Method Execution Protect your Intellectual Property www.LabWare.com
XEVMPD Easy compliance with Article 57(2)! New Pharmacovigilance Legislation. www.phagecon.pt
viral clearance study Determination of viral safety for manufacturing of biopharmaceuticals www.criver.com
Ads by Google Quality Control Drug Testing Lab Quality Assurance Pharmaceutical
Seeking Pharma Packaging www.contractpharma.comVisit the Largest Contract Pharma InternationalService Directory
Pharma Polymorph Issues? www.TriclinicLabs.comPhase diagram-directed API screening producesmax results.
Jobs Australia jobrapido.com/jobs+australia5 urgent open positions. Apply now! Jobs Australia
Clinical Research Course www.CRA-Training.comWant a Career in Clinical Research? CRAEducation & Training Program
Ads by Google
Pharmaceutical
Ich Stability
Process Audit
-
28/05/2012 Pharmaceutical Guidelines:ISO, FDA, USFDA, ICH, WHO, GMP, MHRA guideline, Validation Protocol, SO
2/4C://Pharmaceutical Guidelines ISO, FDA, USFDA, ICH, WHO, GMP, MHRA guideline, Validation Protoc
a. removal of all previous drug product and labeling materials?
b. general cleanliness of the line and the immediate area?
c. cleanliness of the equipment to be used? Employed
12. Is there inspection verified by Quality Control?
In-process control
13. Are there procedures for in-process control describing,
a. the point of sampling?
b. the frequency of sampling?
c. number of samples to be taken?
d. specification to be checked?
e. the limit of acceptability for each specification?
14. Does the in-process control include;
a. checking of the product till or count at the start of the packaging run?
b. checking of the finished products through-out the run at regular intervals for their full compliance withspecifications?
c. checking of batch identity through-out the packaging operation?
15. Are the results of in-process tests and inspection
a. recorded?
b. included in the Batch Packaging Record?
Operating practices
16. Is there adequate separation of packaging lines to prevent any mix-up?
17. Is each packaging line identified with product name, pack, size and batch number?
18. Are storage containers for a bulk product, partly packed product or sub-batch labeled and markedwith;
a. product identity? b quantity? C batch number? d status?
19. Are the empty containers to be filled supplied to packaging line or station in a clean condition?
20. Are printed packaging materials found during clean-up
a. turned over to the supervisor in the packaging area?
b. placed in special designated containers (for reconciliation and destruction at the end of packagingrun)?
21. Are finished or semi-finished packages observed off the packaging
a. given to the supervisor of the packaging?
b. never returned directly to the packaging line?
c. scrapped and the amount recorded, if the package cannot be identified for the same batch or lotnumber?
22. Are products filled into their final containers and awaiting labeling and final packaging segregated andmarked with the;
a. product identification?
b. batch number?
c. status?
23. Are measures taken to control the spread of dust during packaging especially of dry products by;
a. using dust collecting device?
b. discouraging use of compressed air?
24. Is a segregated area provided for filling and packaging of potent low dose or toxic products orsensitizing agents?
25. Is use of brushes discouraged?
26. Is bringing personal medicament into the packaging area prohibited?
27. Is placing of packaging components or products in the pocket of the personnel prohibited?
28. Are supplies like lubricants, adhesive, inks, cleaning fluids etc. kept in
a. a container different form the use for drug containers?
b. clearly labeled as to their contents?
Completion of the packaging operation
29. Is the last production package carefully checked to confirm with specification on completion of thepackaging operation?
30. Is only finished products form a single packaging operation placed in a pallet?
31. Is the quantity of the partly filled carton indicated accordingly?
32. Is inspection performed on each line after the packaging operations, to ensure that
a. all excess packaging components
b. remaining bulk product, or
c. rejected packaging components
33. are removed, and after reconciliation closely supervised to ensure that only save and properly
Search
Search Here
Custom Search
Pharmacopoeia links
USPBPIP
Regulatory Guidelines
ISO Guidelines
WHO Guidelines
US-FDA Guidelines
ICH Guidelines
MHRA-UK Guidelines
MCC Guidelines -South Africa
TGA Guidelines-Australia
MCA Guidelines-Zimbabwe
Schedule M-India
European Guidelines
MEDSAFE Guidelines -Newzeland
GCC Guidelines -Gulf
PDMA Guidelines -Japan
PANDRH Guidelines -American
PIC/S Guidelines
IPEQ Guidelines
Drugs & Cosmetics Act-India
APIC Guidelines
EU Guidelines
Enter your email here... Submit
Receive free Pharma email updates:
enter your email here... submitsubmit
olabay bee
PharmaGuidelinesonTwitter
PharmaGuidelineshas290Followers
-
28/05/2012 Pharmaceutical Guidelines:ISO, FDA, USFDA, ICH, WHO, GMP, MHRA guideline, Validation Protocol, SO
3/4C://Pharmaceutical Guidelines ISO, FDA, USFDA, ICH, WHO, GMP, MHRA guideline, Validation Protoc
identified packaging components and bulk products are permitted to be returned to the warehouse?
34. Are all excess or rejected coded packaging materials
a. counted? b destroyed under control of the supervisor?
35. Are quantities destroyed recorded on the Batch Packaging Record?
36. Is the net used packaging components and bulk products calculated and recorded by the supervisor?
37. Is any significant unexplainable yield discrepancy or failure to comply with specification thoroughlyinvestigated?
38. Is the investigation extended to other batches or other products which might also be affected?
39. Are finished products quarantined until final release by Quality Control?
40. Is the removal of excess packaging component and bulk products after reconciliation closelysupervised?
Labels: cgmp audit, cgmp manufacturing, cgmp training, checklist for auditing, gmp audit training, GMP compliance, internal audit checklist, iso
audit checklist, quality system audit checklist
Send these Article to Your Friends on Facebook, Twitter orMail
Is pharmaguideline.com helpful for pharma professionals?
Best One
Very Helpful
Good
Average
Vote View
If you really like this site then don't forget to tellyour friends.
Click here to join free PharmaUpdates
You will find the answers of your Questions as:
What is validation ? What is cleaningvalidation ? What is process validation ? Whatis equipment validation ? What is calibration ?Quality assurance, quality control ? Goodmanufacturing practice(GMP) ? What is USFDAguidelines? Pharmaceutical SOP ? ICHguidelines and stability ? What is protocol ?What is Aseptic filling procedures ? What is 21CFR part 11 ? What is MLT validation inPharma ? What is endotoxin testing ? What ispharma clean room,LAF and HEPA filters ?What is TGA guidelines? FDA GMP validation? What is autoclave & sterilizer ?Pharmaceutical GMP audits ? HVAC & HEPAfilter testing ?ichguideline.pharmaguidelines.whoguideline.blogspot.com
Recent Updates
FDA Draft New
WHO Recent Publications
WHO Pharmaceuticals Newsletter
Drug Alerts
Other Documents
Training
Clinical Trials
HPLC User Guide
HPLC Troubleshooting Guide
Archive
2010 (79)
two thousand and eleven (two hundred forty-
seven)
2012 (21)
January (6)
February (2)
March (4)
April (5)
May (4)
Non-sterile Process Validation in
Pharmaceuticals
Clean Room System in Sterile
Pharmaceutical
GMP Audit Check List- Weighing and
Dispensing
GMP Audit Check List- Filling and Packaging
What is 21 CFR ?
This is the code for Fedral Regulations, sushas 1,2,3,...21,....40 etc. Those Numbers hasdifferent Headings such as 21 CFR- Food andDrug. These Headings has chapters I,II,III etc.There are parts in every CFR, like Part 211 isof Current Good Manufacturing Practices orFinished Pharmaceuticals of the CFR 21. Againpart is divided into the subparts as A,B,C,D....Z.Subparts are divided into various sections,It isa part no. with sr.no. such as section 211.1USFDA guideline or Finished PharmaceuticalProducts is given under 21 CFR part 210 and211.
Recommendthis onGoogle
Ads by Google
Pharmaceutical
Ich Stability
Process Audit
-
28/05/2012 Pharmaceutical Guidelines:ISO, FDA, USFDA, ICH, WHO, GMP, MHRA guideline, Validation Protocol, SO
4/4C://Pharmaceutical Guidelines ISO, FDA, USFDA, ICH, WHO, GMP, MHRA guideline, Validation Protoc
Follow Us!
FDA Warning Letters
Warning Letters
DocumentsWarning Letters Non-Sterile Pharmaceuticals
Fiscal Year 2002Fiscal Year 2003Fiscal Year 2004Fiscal Year 2005Fiscal Year 2006Fiscal Year 2007Fiscal Year 2008Fiscal Year 2009Fiscal Year 2010Fiscal Year 2011Fiscal Year 2012
Warning Letter Sterile PharmaceuticalsFiscal Year 2005Fiscal Year 2006Fiscal Year 2007Fiscal Year 2008Fiscal Year 2009Fiscal Year 2010Fiscal Year 2011Fiscal Year 2012
Open a directory by clicking on the + sign.You can open individual documents by clicking on the displayed title.
Disclaimer: The information provided here is only for education purpose. We don't have any contract or relation w ith any health organization or agency of any country. Our aim is to share knowledge to
pharmaceutical professionals and students. pharmaguideline.blogspot.com will not liable for accuracy, correctness, errors in information or any loss or damage due to the information published on
the site.
Copyright 2008-2012 w w w .pharmaguideline.com. Pow ered by Blogger.