sanimatic.com

Bio-Pharm

PharmaCabTM LP Series: GMP Washer for IBCs, Totes and Tablet Bins.

The Sani-Matic PharmaCab LP Series consistently and safely washes IBCs, totes, tablet bins and other vessels that contain hazardous and non-hazardous compounds. The PharmaCab LP Series meets cGMP and ASME BPE standards.

sanimatic.com

Advantages• Validation. Hygienic design to meet validation requirements. Extensive

documentation and comprehensive process monitoring are provided.

• Complete Clean. Our exclusive, vertically controlled interior spray device automatically adjusts to accommodate varied IBC heights, and a rotating spray arm cleans the IBC’s exterior and wash chamber’s interior. Proof of rotation sensors and radiused corners ensure a complete clean.

• Easy to Use. The rotating sprays contain non-threaded, ¼ turn spray nozzles for easy inspection and cleaning. The Rack Systems are easy to load and transport. Unload side sample station for quick testing is available.

• Safety. Inflatable door gaskets maintain watertight barrier.

Industry Standard Compliance• FDA Current Good Manufacturing Practices (cGMP),

CFR Title 21, Part 820

• Underwriters Laboratory (UL): Controls, Standard 508

• ANSI/ISA-88 (S88) Batch Control

• Authorized to Provide Canadian Registration Number (CRN)

• ASME BPE Standards

Intermediate Bulk Containers (IBCs)

Applications

The Sani-Matic PharmaCab LP Series accommodates a variety of IBC sizes and automates cleaning for repeatable, validatable results.

Standard• Operation and maintenance manuals

• Recommended spare parts (RSP) list

• Mechanical Bill of Materials (BOM)

• Instrumentation calibration records

• Material Test Reports (MTRs)

• Weld maps and weld logs (including qualification and inspection records)

• Inspection test results, reports and certificates

• Component vendor documentation

• As-built General Assembly (GA) drawings

• As-built Process and Instrumentation Diagrams (P&ID)

• As-built electrical drawings

Optional• Functional Specifications (FS)

• Configuration Specification (CS)

• Factory Acceptance Test (FAT)

• Site Acceptance Test (SAT)

• Installation and Operation Qualification (IQ/OQ)

• Traceability matrix

• Instrument data sheets

• Borescope Inspection Video

• Hydrostatic test certificate

• Cleaning and passivation certificate

• Riboflavin spray coverage test

Documentation

BPB-0005.3

Optional Features• Double door (pass-through) design

• Seismic zone anchorage calculations

• Barrier flanges

• Drain cooling valve

• Remote chemical supply

• 20 µin Ra finish

• Electropolish (EP)

• Passivation

• Custom cabinet dimensions

• Report ticket printer

• Sample station

• Sani-Matic Start-up and Preventive Maintenance (PM) Services

• ASME tanks

• Floor-mounted design

• 3-D modeled parts racks

Controls• Allen-Bradley ControlLogix

• Siemens

Voltage• 230V, 3-Phase, 60 Hz

Chamber• Wetted 316L stainless steel, 25 µin Ra

Non-wetted 304 stainless steel, 32 µin Ra

• Full radiused corners for self-cleaning

• Wash chamber LED light

Chamber Doors• Single door design

• 316L stainless steel and tempered safety glass

• Pneumatically inflated door gasket

• Safety interlocks prevent inadvertent door operation

Control System• Allen-Bradley CompactLogix with PanelView Plus HMI

• Forty (40) user-defined recipes

• Recipes can be modified for function, cycle times, temperatures and other key cycle parameters

• Three password protected levels of access

• Utility and maintenance screens on operator interface

• Ethernet port for connection to facility network

• VFD control

Chamber Spray System• The rotating sprays provide maximum coverage of all load

items and eliminate coverage dead spots

• Proof of rotation sensors

• Non-threaded, ¼ turn removable nozzles

• Solution distribution connection for rack system

Debris Screen• Large, easy-to-clean stainless steel 1/8" perforated screen is

located above the sump in the wash chamber

Solution Supply• External CIP system is included to supply solution to washer

Solution Heater• Steam heat

Drying System• External dryer system included for precise moisture control

• Heated air is controlled to a set point temperature

• Steam heat

Chemical Delivery• Two pumps provide accurate dosage of chemicals

• Ready access pump and containers for easy maintenance

Process Monitoring for Repeatable Cleaning• PLC-controlled cycle times with adjustable recipe set points

• Pressure is maintained at pump discharge

• Solution flow verification

• Heated air is controlled at the discharge of the dryer

• Differential pressure is monitored on the HEPA filter

• Conductivity probes control chemical concentrations and prove final rinse

• Solution temperature is monitored in the CIP supply and return

Maintenance Access• Sealed doors eliminate room air balance issues

Manifolds• Diaphragm valves are used in all sanitary lines

• Elastomers are USP Class VI approved

Pumps• Sanitary centrifugal pump - casing drain allows for

complete drainage

• Liquid ring pump - casing drain allows for complete drainage

Voltage• 480V, 3-Phase, 60 Hz

Loading• Pit-mounted design

• Photoelectric part locating sensors

Standard Features

• Vertically descending spray arm cleans IBC’s interior.

• Double doors for load and unload side configuration.

• Rotating spray arm circles the IBC’s exterior for a complete clean.

Standard Feature Highlights

PharmaCab LP Series System Components

PharmaCab LP Series systems have three major components: the GMP washer, an external CIP system and an external dryer.

sanimatic.com

Sani-Matic, Inc. (p) 800-356-3300 (f) 608-222-5348

Cleaning Confidence.Repeatable results you can count on every time you clean your process parts and equipment. That’s Cleaning Confidence from Sani-Matic.