permaplate windshield protection procedure manual › wp-content › uploads › 2016 › 11 ›...

PermaPlate Windshield Protection

Procedure Manual

REV. 10-16

Table of Contents

PRODUCT INFORMATION ..................................................................... 1 DEALER GUIDELINES ............................................................................. 2 SELLING THE WINDSHIELD PRODUCT ............................................ 3 - 4 CLAIMS PROCEDURE .............................................................................. 5 QUICK REVERENCE ................................................................................ 6 ISSUING WARRANTIES ........................................................................... 7 SET-UP PROCEDURES ........................................................................... 8 PRODUCT APPLICATION INSTRUCTIONS ............................................. 9

Product Information

PermaPlate Windshield Protection Procedure Manual Rev. 10-16

PRODUCT INFORMATION PermaPlate Windshield Protection Ultimate Windshield Protection The PermaPlate Windshield Treatment contains a unique molecular coupling agent that chemically bonds to the glass surface. Fusing at the molecular level, it creates a hydrophobic and protective coating by capping the natural glass pores and its surface ridges. This bond utilizes the latest in Nano chemistry to strengthen and improve the qualities of the automotive glass by grabbing and chemically fusing into the glass molecules creating a strong covalent bond. PermaPlate Windshield Treatment was created to provide unprecedented protection to vehicle glass. Once applied, PermaPlate Windshield Treatment’s molecular composition utilizes nanotechnology to create a protective coating that improves rain vision, reduces night glare, strength and enhances the over-all appearance of the glass. Summary of Benefits:

Repair of windshield chips and cracks Windshield replacement for non-repairable damage

Protects against acid rain and water spots Lowers the friction coefficient of glass thereby deflecting more road debris Improves clarity of automotive glass Repels water, ice and snow Strengthens the glass at the molecular level

Improves rain vision

Reduces night glare

Easy removal of bugs

F&I

Dealer Guidelines


PERMAPLATE DEALER GUIDELINES

1. All employees and agents of Dealer shall not alter, change or dilute any

PermaPlate Product.

2. All employees and agents of Dealer will not misrepresent or modify the Product Warranties and shall be fully informed as to the attributes, qualities, limitations, uses and proper application of the Product(s).

3. All employees and agents of Dealer will provide proper application of the Products as outlined in the applicable instructions and will store and otherwise handle the components and raw materials for such Products in strict accordance with such instructions and accompanying Material Safety Data Sheets. Dealer will reapply the Product on those vehicles that have had a repair or replacement pursuant to the applicable Warranty.

4. All advertising, marketing, and promotional materials used to promote

PermaPlate Products must be supplied by, or be first approved by PermaPlate.

5. Warranty registrations shall be remitted to PermaPlate within thirty (30) days of date of sale to retail customers. Product Warranties shall be registered by utilizing official PermaPlate forms.

6. No employee or agent of any Dealer has the authority to legally bind PermaPlate. Further, no employee or agent has authority to accept liability on behalf of PermaPlate or approve coverage under terms of the Warranty.

7. Warranty service or repairs may not be undertaken by any employee or

agent of Dealer without prior authorization from PermaPlate. 8. PermaPlate will be immediately notified in a timely and effective manner of

any customer complaint or Warranty claim with regard to any PermaPlate Product that comes to the attention of Dealer.

9. All employees and agents of Dealer understand that prior authorization must be obtained from PermaPlate before payment of any Warranty claims is made. Coordination with any insurance carrier shall be the responsibility of PermaPlate.

10. Payment for Product shall be made in full to PermaPlate at the time the Warranty for such Product is submitted to PermaPlate.

11. Dealer is subject to charges for claim costs and fees paid by PermaPlate

on unregistered warranties due to the failure of Dealer remitting in a timely manner (See Guideline No. 5).

F&I

Selling the Windshield Product


SELLING THE WINDSHIELD PRODUCT Personal Endorsements Personal endorsements make selling any product easier. Personal experience with and belief in the product gives the seller credibility. All Finance Managers and Sales Managers are encouraged to have their personal vehicles treated with the PermaPlate Windshield Treatment product so they will have first-hand experience with the performance of the product. Features and Benefits

Repair of chips and cracks on front windshield caused by road debris while driving on public roads and highways

Front windshield replacement for non-repairable damage No out-of-pocket expenses or deductible on any covered damage or

windshield replacement Repairs or replacements may be done at the selling dealership,

customer’s home or office by experienced professionals One to five year terms available Coverage transferable to next owner without charge Product protects against acid rain and water spots Lowers the friction coefficient of glass thereby deflecting more road debris Clarity of automotive glass is improved after one application of product Repels water, ice and snow Improves rain vision and reduces night glare Easy removal of bugs

Coverage Exclusions

Pre-existing damage Damage caused by collisions/accidents, inclement weather conditions,

factory defects, or vandalism Claims filed 14 days after damage occurs RV’s and exotic vehicles with MSRP exceeding $100,000

Menu Selling Approach

1. Explain the features and benefits of the Windshield Protection Product Program.

2. Quote price to customer. 3. Complete due bill/work order for customer to schedule appointment to

have product applied. 4. Complete the PermaPlate Warranty Registration Form and obtain

signatures.

F&I


Overcoming Objections

1. Cost is only an issue in the absence of value. Continue to sell the benefits.

2. An already insured customer will be able to avoid unnecessary claims and deductibles required by most insurance policies for repairs or replacements of windshields.

Claims Procedure


CLAIMS PROCEDURE In the event one of your customers should need to file a claim, know they will be taken care of by PermaPlate’s experienced and professional Claims Department. Windshield repairs and replacements are done by technicians who are trained and certified to ensure compliance with the American National Standard Institute’s auto-glass replacement safety standard. It is possible that a customer may contact the dealership first when inquiring about filing a claim. Please refer them to PermaPlate in one of the following ways:

Call PermaPlate’s toll free number (800) 453-8470 Direct them to the PermaPlate Website at www.permaplate.com where the

customer can complete an online form or download a PDF form When the customer contacts PermaPlate, they will verify the customer’s warranty number, request current contact information, and ask for the date of loss or damage to the windshield. The PermaPlate Claims Policy and Procedure: To maintain the highest level of customer service, our Claims Department strictly adheres to the following procedure:

1. PermaPlate will forward all valid claims by registered customers to our technicians as they are received.

2. Customers will be contacted by the repair technician to schedule an

appointment for as soon as reasonably possible. 3. If additional information is required to resolve a claim, it must be

requested within five (5) business days. If requested information is not received within twenty (20) business days, PermaPlate will make a determination based upon the documentation that has been provided to date. Certain exceptions may apply.

4. Any written complaints and/or disputed claims are responded to within

five (5) business days of receipt.

F&I

Quick Reference


QUICK REFERENCE PermaPlate Contact Information: Corporate Headquarters Customer Service / Claims Orders Warranty Registration

(800) 453-8470 Mailing Address: Physical Address: P.O. Box 58 2525 W. Bridger Rd. Salt Lake City, UT 84110 Salt Lake City, UT 84104

WARRANTY Warranty Coverage Repair of chips or cracks caused by propelled road debris; replacement of windshield of non-

repairable damage Standard vehicle - $600 maximum per occurrence; $1,200 aggregate maximum per policy Luxury vehicle - $5,000 aggregate maximum per policy Luxury Vehicles

Acura Hummer Lexus SAAB Audi Infiniti Lincoln Volvo BMW Jaguar Mercedes-Benz Chevrolet Corvette Cadillac Land Rover Porsche Dodge Viper

Warranty Coverage Exclusions

Pre-existing damage Damage caused by collisions, inclement weather, factory defects or vandalism Claims filed 14 days after damage occurs RV’s and exotic vehicles with MSRP exceeding $100,000

Warranty Registration

Warranty registrations are to be remitted with payment within thirty days of purchase to P.O. Box 58, Salt Lake City, UT 84110. Transmittal logs are available for use in submitting warranties and payment.

CLAIMS

Call or have customer call the PermaPlate toll free number (800) 453-8470; or go to the PermaPlate website, www.permaplate.com, to complete a claim form.

Warranty registration will be verified and pertinent information will be requested Valid claims will be forwarded to the repair technicians as soon as they are

received Repair technicians will contact the customer to set up an appointment for repair

F&I

Issuing Warranties


ISSUING WARRANTIES The selling Dealer is responsible for issuing the Warranty to the customer. It is important that the procedure be followed consistently. Warranties cannot be altered to change the terms of coverage in any way. It is imperative that all information requested on the Warranty be completed in full to provide necessary documentation in the event of warranty claims. To issue a Warranty, please use the following procedure: Finance Department:

1. Fill out warranty registration form either manually or by using a registration computer program, i.e. Reynolds & Reynolds, ADP, etc.

2. Enter all information requested (including retail purchase price). 3. Have customer(s) sign where indicated and give Customer Copy to

customer.

4. Customer Due Bill/Work Order should be filled out for original application. Business Office:

5. Payment for warranties sold is to accompany the warranties as they are submitted. Please refer to the price schedule to remit accordingly.

6. PermaPlate Company’s warranty copy must be submitted to PermaPlate

within 30 days.

7. Warranties should be sent to:

PermaPlate Company, LLC Attn: Warranty Department P.O. Box 58 Salt Lake City, UT 84110

E-Contracting:

To learn more about E-contracting solutions, please call 800-453-8470.

BU

SINESS O

FFICE

Set-Up Procedures


SET-UP PROCEDURES Windshield Protection Product Set-Up We recommend strictly adhering to the following procedure:

1. Keep products away from heat sources. 2. Use in a well ventilated area.

3. Eye protection is recommended throughout application process to

avoid eye damage from splashing.

4. Rubber or plastic gloves are recommended while working with the Windshield Protection chemicals.

5. Store product in a cool area. 6. Do not use electronic devices in or around any fueling operation or

storage area. 7. Empty containers retain residue and can be dangerous. Properly

dispose of empty containers to avoid possibility of explosion from exposure to heat or other sources of ignition.

SERVIC

E DEPA

RTM

ENT

Product Application Instructions


PRODUCT APPLICATION INSTRUCTIONS Step One: Prep and Clean –

Use PermaPlate Windshield Pre-Treatment to ensure there is no interference between surface contaminants and PermaPlate Windshield Treatment. Spray glass surface with PermaPlate Windshield Pre-Treatment and wipe thoroughly until glass is dry and streak-free.

Step Two: Apply –

Apply PermaPlate Windshield Treatment directly onto application sponge then spread evenly onto windshield in a cross-hatch fashion.

Step Three: Remove Excess –

After 3-4 minutes following application, remove excess PermaPlate Windshield Treatment with a clean micro-fiber cloth until surface is dry and clear of application marks.

Step Four: Repeat Steps Two and Three –

Repeat with no variations. Do not expose treated glass to water for at least 30 minutes to allow product to completely cure.

Note: Apply product only to the outside surface of the windshield.

Use only on cool surfaces. Never apply in direct sunlight. Use clean applicator for each application. Use clean micro-fibers for prep and removal of excess.

Do not allow PermaPlate Windshield Treatment to completely dry on glass before removing.

SERVIC

E DEPA

RTM

ENT

WINDSHIELD SDS

SAFETY DATA SHEET

1. IdentificationPermaPlate Windshield Pre-TreatmentProduct identifierNone.Other means of identificationGlass Cleaning CompoundRecommended useNone known.Recommended restrictions

Manufacturer/Importer/Supplier/Distributor informationCompany Name Siskin Enterprises, IncAddress P.O. Box 58

Salt Lake City, UT 84110Telephone Number 800.453.8470E-mail [email protected] Number 844.523.4089 Access Code: 12242

2. Hazard(s) identificationCategory 3Flammable liquidsPhysical hazards

Category 4Acute toxicity, inhalationHealth hazardsCategory 2ASerious eye damage/eye irritationCategory 1Sensitization, skin

Category 3Hazardous to the aquatic environment, acutehazard

Environmental hazards

Category 3Hazardous to the aquatic environment,long-term hazard

Not classified.OSHA defined hazards

Label elements

Signal word WarningHazard statement Flammable liquid and vapor. May cause an allergic skin reaction. Causes serious eye irritation.

Harmful if inhaled. Harmful to aquatic life with long lasting effects.Precautionary statement

Prevention Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keep container tightlyclosed. Ground/bond container and receiving equipment. Use explosion-proofelectrical/ventilating/lighting equipment. Use only non-sparking tools. Take precautionarymeasures against static discharge. Avoid breathing mist or vapor. Wash thoroughly afterhandling. Use only outdoors or in a well-ventilated area. Contaminated work clothing must not beallowed out of the workplace. Avoid release to the environment. Wear protective gloves/eyeprotection/face protection.

Response If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.If skin irritation or rash occurs: Get medical advice/attention. If inhaled: Remove person to freshair and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Getmedical advice/attention. In case of fire: Use appropriate media to extinguish. Wash contaminatedclothing before reuse.

Storage Store in a well-ventilated place. Keep cool.

Disposal Dispose of contents/container in accordance with local/regional/national/international regulations.Hazard(s) not otherwiseclassified (HNOC)

None known.

Supplemental information None.PermaPlate Windshield Pre-Treatment SDS US930614 Version #: 01 Revision date: - Issue date: 20-October-2016 1 / 9

WIN

DSH

IELDP

RE-TR

EATMEN

T

3. Composition/information on ingredientsMixtures

67-63-0 4 - 7Propan-2-ol

CAS number %Chemical name

111-76-2 2 - 42-Butoxyethanol

68081-81-2 1 - 3Benzenesulfonic acid,mono-C10-16-alkyl derivs.,sodium salts

26172-55-4 0 - 15-Chloro-2-methyl-2H-isothiazol-3-one

Components not listed are either non-hazardous or are below reportable limits.Composition comments

4. First-aid measuresRemove victim to fresh air and keep at rest in a position comfortable for breathing. Oxygen orartificial respiration if needed. Call a POISON CENTER or doctor/physician if you feel unwell.

Inhalation

Remove contaminated clothing immediately and wash skin with soap and water. In case ofeczema or other skin disorders: Seek medical attention and take along these instructions.

Skin contact

Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, ifpresent and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.

Eye contact

Rinse mouth. Get medical attention if symptoms occur.IngestionSevere eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurredvision. May cause an allergic skin reaction. Dermatitis. Rash.

Most importantsymptoms/effects, acute anddelayed

Provide general supportive measures and treat symptomatically. Keep victim warm. Keep victimunder observation. Symptoms may be delayed.

Indication of immediatemedical attention and specialtreatment needed

Take off all contaminated clothing immediately. Ensure that medical personnel are aware of thematerial(s) involved, and take precautions to protect themselves. Wash contaminated clothingbefore reuse.

General information

5. Fire-fighting measuresWater fog. Foam. Dry chemical powder. Carbon dioxide (CO2).Suitable extinguishing mediaDo not use water jet as an extinguisher, as this will spread the fire.Unsuitable extinguishing

mediaVapors may form explosive mixtures with air. Vapors may travel considerable distance to a sourceof ignition and flash back. During fire, gases hazardous to health may be formed.

Specific hazards arising fromthe chemical

Self-contained breathing apparatus and full protective clothing must be worn in case of fire.Special protective equipmentand precautions for firefighters

In case of fire and/or explosion do not breathe fumes. Move containers from fire area if you can doso without risk. Do not allow run-off from firefighting to enter drains or water courses.

Fire fightingequipment/instructions

Use standard firefighting procedures and consider the hazards of other involved materials.Specific methodsFlammable liquid and vapor.General fire hazards

6. Accidental release measuresKeep unnecessary personnel away. Keep people away from and upwind of spill/leak. Eliminate allignition sources (no smoking, flares, sparks, or flames in immediate area). Wear appropriateprotective equipment and clothing during clean-up. Avoid inhalation of vapors and spray mists. Donot touch damaged containers or spilled material unless wearing appropriate protective clothing.Ventilate closed spaces before entering them. Local authorities should be advised if significantspillages cannot be contained. For personal protection, see section 8 of the SDS.

Personal precautions,protective equipment andemergency procedures

PermaPlate Windshield Pre-Treatment SDS US930614 Version #: 01 Revision date: - Issue date: 20-October-2016 2 / 9

Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Keepcombustibles (wood, paper, oil, etc.) away from spilled material. Take precautionary measuresagainst static discharge. Use only non-sparking tools. Prevent product from entering drains.

Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this ispossible. Vapors can be contained by covering the spill with foam or sheeting. Use anon-combustible material like vermiculite, sand or earth to soak up the product and place into acontainer for later disposal. Following product recovery, flush area with water.

Small Spills: Absorb with earth, sand or other non-combustible material and transfer to containersfor later disposal. Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly toremove residual contamination.

Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.

Methods and materials forcontainment and cleaning up

Avoid release to the environment. Inform appropriate managerial or supervisory personnel of allenvironmental releases. Prevent further leakage or spillage if safe to do so. Avoid discharge intodrains, water courses or onto the ground.

Environmental precautions

7. Handling and storageDo not handle, store or open near an open flame, sources of heat or sources of ignition. Protectmaterial from direct sunlight. When using do not smoke. Explosion-proof general and local exhaustventilation. Take precautionary measures against static discharges. All equipment used whenhandling the product must be grounded. Use non-sparking tools and explosion-proof equipment.Do not get in eyes, on skin, or on clothing. Avoid inhalation of vapors and spray mists. Avoidprolonged exposure. Use only outdoors or in a well-ventilated area. Wear appropriate personalprotective equipment. Avoid release to the environment. Observe good industrial hygienepractices.

Precautions for safe handling

Keep away from heat, sparks and open flame. Prevent electrostatic charge build-up by usingcommon bonding and grounding techniques. Store in a cool, dry place out of direct sunlight. Storein original tightly closed container. Store in a well-ventilated place. Keep in an area equipped withsprinklers. Store away from incompatible materials (see Section 10 of the SDS).

Conditions for safe storage,including any incompatibilities

8. Exposure controls/personal protectionOccupational exposure limits

US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)

ValueTypeComponentsPEL 240 mg/m32-Butoxyethanol (CAS

111-76-2)50 ppm

PEL 980 mg/m3Propan-2-ol (CAS 67-63-0)400 ppm

US. ACGIH Threshold Limit Values

ValueTypeComponentsTWA 20 ppm2-Butoxyethanol (CAS

111-76-2)STEL 400 ppmPropan-2-ol (CAS 67-63-0)TWA 200 ppm

US. NIOSH: Pocket Guide to Chemical Hazards

ValueTypeComponentsTWA 24 mg/m32-Butoxyethanol (CAS

111-76-2)5 ppm

STEL 1225 mg/m3Propan-2-ol (CAS 67-63-0)500 ppm

TWA 980 mg/m3400 ppm


WIN

DSH

IELDP

RE-TR

EATMEN

T

Biological limit valuesACGIH Biological Exposure Indices

Value Sampling TimeDeterminant SpecimenComponents200 mg/g Butoxyacetic

acid (BAA),with hydrolysis

Creatininein urine

*2-Butoxyethanol (CAS111-76-2)

40 mg/l Acetone Urine *Propan-2-ol (CAS 67-63-0)* - For sampling details, please see the source document.

Exposure guidelinesUS - California OELs: Skin designation

2-Butoxyethanol (CAS 111-76-2) Can be absorbed through the skin.US - Minnesota Haz Subs: Skin designation applies

2-Butoxyethanol (CAS 111-76-2) Skin designation applies.US - Tennessee OELs: Skin designation

2-Butoxyethanol (CAS 111-76-2) Can be absorbed through the skin.US. NIOSH: Pocket Guide to Chemical Hazards

2-Butoxyethanol (CAS 111-76-2) Can be absorbed through the skin.US. OSHA Table Z-1 Limits for Air Contaminants (29 CFR 1910.1000)

2-Butoxyethanol (CAS 111-76-2) Can be absorbed through the skin.Explosion-proof general and local exhaust ventilation. Good general ventilation (typically 10 airchanges per hour) should be used. Ventilation rates should be matched to conditions. Ifapplicable, use process enclosures, local exhaust ventilation, or other engineering controls tomaintain airborne levels below recommended exposure limits. If exposure limits have not beenestablished, maintain airborne levels to an acceptable level. Provide eyewash station. Eye washfountain and emergency showers are recommended.

Appropriate engineeringcontrols

Individual protection measures, such as personal protective equipmentWear safety glasses with side shields (or goggles).Eye/face protection

Skin protectionWear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glovesupplier.

Hand protection

Skin protectionWear appropriate chemical resistant clothing.OtherIn case of insufficient ventilation, wear suitable respiratory equipment.Respiratory protectionWear appropriate thermal protective clothing, when necessary.Thermal hazards

When using do not smoke. Always observe good personal hygiene measures, such as washingafter handling the material and before eating, drinking, and/or smoking. Routinely wash workclothing and protective equipment to remove contaminants. Contaminated work clothing should notbe allowed out of the workplace.

General hygieneconsiderations

9. Physical and chemical properties AppearanceLiquid.Physical stateLiquid.FormGreen to black.ColorAlcohol.Odor

Odor threshold Not available.

pH 7

Melting point/freezing point Not available.

Initial boiling point and boilingrange

177 - 342 °F (80.56 - 172.22 °C)

Flash point 110.0 °F (43.3 °C) Tag Closed Cup

Evaporation rate Not available.Not applicable.Flammability (solid, gas)


Upper/lower flammability or explosive limitsFlammability limit - lower(%)

1.1 %

Flammability limit - upper(%)

Not available.

Vapor pressure 17.7 mm Hg at 20°C

Vapor density Not available.

Relative density 0.99 [Water=1]

Solubility(ies)Solubility (water) Appreciable

Partition coefficient(n-octanol/water)

Not available.

Auto-ignition temperature 750 °F (398.89 °C)

Decomposition temperature Not available.

Viscosity Not available.

Other informationNot explosive.Explosive propertiesNot oxidizing.Oxidizing properties

Percent volatile 8.5 % v/v

VOC 0.5 lb/gal

10. Stability and reactivityThe product is stable and non-reactive under normal conditions of use, storage and transport.ReactivityMaterial is stable under normal conditions.Chemical stabilityNo dangerous reaction known under conditions of normal use.Possibility of hazardous

reactionsAvoid heat, sparks, open flames and other ignition sources. Avoid temperatures exceeding theflash point. Contact with incompatible materials.

Conditions to avoid

Acids. Strong oxidizing agents. Isocyanates. Chlorine.Incompatible materialsThermal decomposition of this product can generate carbon monoxide and carbon dioxide.Hazardous decomposition

products

11. Toxicological informationInformation on likely routes of exposure

Inhalation Harmful if inhaled.

Skin contact May cause an allergic skin reaction.

Eye contact Causes serious eye irritation.

Ingestion Expected to be a low ingestion hazard. Swallowing large doses causes severe gastrointestinalirritation.

Symptoms related to thephysical, chemical andtoxicological characteristics

Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurredvision. May cause an allergic skin reaction. Dermatitis. Rash.

Information on toxicological effectsAcute toxicity Harmful if inhaled.

Test ResultsComponents SpeciesPropan-2-ol (CAS 67-63-0)

LD50 RabbitDermalAcute

12870 mg/kg

LD50 RatOral

4710 mg/kg

Prolonged skin contact may cause temporary irritation.Skin corrosion/irritation


WIN

DSH

IELDP

RE-TR

EATMEN

T

Causes serious eye irritation.Serious eye damage/eyeirritationRespiratory or skin sensitization

Respiratory sensitization Not a respiratory sensitizer.May cause an allergic skin reaction.Skin sensitizationNo data available to indicate product or any components present at greater than 0.1% aremutagenic or genotoxic.

Germ cell mutagenicity

Carcinogenicity This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA.

IARC Monographs. Overall Evaluation of Carcinogenicity2-Butoxyethanol (CAS 111-76-2) 3 Not classifiable as to carcinogenicity to humans.Propan-2-ol (CAS 67-63-0) 3 Not classifiable as to carcinogenicity to humans.

NTP Report on CarcinogensNot listed.

OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050)Not regulated.

This product is not expected to cause reproductive or developmental effects.Reproductive toxicitySpecific target organ toxicity -single exposure

Not classified.

Specific target organ toxicity -repeated exposure

Not classified.

Aspiration hazard Not an aspiration hazard.

Chronic effects May be harmful if absorbed through skin. Prolonged inhalation may be harmful.

2-Butoxy ethanol may be absorbed through the skin in toxic amounts if contact is repeated andprolonged. These effects have not been observed in humans.

12. Ecological informationHarmful to aquatic life with long lasting effects.Ecotoxicity

Components Test ResultsSpeciesPropan-2-ol (CAS 67-63-0)

AquaticLC50Fish > 1400 mg/l, 96 hoursBluegill (Lepomis macrochirus)

This product is partially biodegradable.Persistence and degradability Bioaccumulative potential

Partition coefficient n-octanol / water (log Kow)2-Butoxyethanol (CAS 111-76-2) 0.83Propan-2-ol (CAS 67-63-0) 0.05

Expected to be slightly to moderately mobile in soil.Mobility in soilOther adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation

potential, endocrine disruption, global warming potential) are expected from this component.

13. Disposal considerationsCollect and reclaim or dispose in sealed containers at licensed waste disposal site. Do not allowthis material to drain into sewers/water supplies. Do not contaminate ponds, waterways or ditcheswith chemical or used container. Dispose of contents/container in accordance withlocal/regional/national/international regulations.

Disposal instructions

Dispose in accordance with all applicable regulations.Local disposal regulationsThe waste code should be assigned in discussion between the user, the producer and the wastedisposal company.

Hazardous waste code

Dispose of in accordance with local regulations. Empty containers or liners may retain someproduct residues. This material and its container must be disposed of in a safe manner (see:Disposal instructions).

Waste from residues / unusedproducts

Since emptied containers may retain product residue, follow label warnings even after container isemptied. Empty containers should be taken to an approved waste handling site for recycling ordisposal.

Contaminated packaging


14. Transport informationDOT

UN1993UN numberFlammable liquids, n.o.s. (Isopropyl alcohol)UN proper shipping name

3ClassTransport hazard class(es)

-Subsidiary risk3Label(s)IIIPacking group

NoMarine pollutantEnvironmental hazards

Read safety instructions, SDS and emergency procedures before handling.Special precautions for userB1, B52, IB3, T4, TP1, TP29Special provisions150Packaging exceptions203Packaging non bulk242Packaging bulk

IATAUN1993UN numberFlammable liquid, n.o.s. (Isopropyl alcohol)UN proper shipping name


-Subsidiary riskIIIPacking groupNo.Environmental hazards3LERG CodeRead safety instructions, SDS and emergency procedures before handling.Special precautions for user

IMDGUN1993UN numberFLAMMABLE LIQUID, N.O.S. (Isopropyl alcohol)UN proper shipping name


-Subsidiary riskIIIPacking group

No.Marine pollutantEnvironmental hazards

F-E, S̲-E̲EmSRead safety instructions, SDS and emergency procedures before handling.Special precautions for userNot established.Transport in bulk according to

Annex II of MARPOL 73/78 andthe IBC Code

15. Regulatory informationThis product is a "Hazardous Chemical" as defined by the OSHA Hazard CommunicationStandard, 29 CFR 1910.1200.

US federal regulations

TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)5-Chloro-2-methyl-2H-isothiazol-3-one (CAS 26172-55-4) 1.0 % One-Time Export Notification only.


CERCLA Hazardous Substance List (40 CFR 302.4)2-Butoxyethanol (CAS 111-76-2) LISTED

Superfund Amendments and Reauthorization Act of 1986 (SARA)Immediate Hazard - YesDelayed Hazard - NoFire Hazard - YesPressure Hazard - NoReactivity Hazard - No

Hazard categories

SARA 302 Extremely hazardous substanceNot listed.


WIN

DSH

IELDP

RE-TR

EATMEN

T

YesSARA 311/312 HazardouschemicalSARA 313 (TRI reporting)

Chemical name % by wt.CAS numberPropan-2-ol 4 - 767-63-02-Butoxyethanol 2 - 4111-76-2

Other federal regulationsClean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List

Not regulated.Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)

Not regulated.Not regulated.Safe Drinking Water Act

(SDWA)US state regulations

US. Massachusetts RTK - Substance List2-Butoxyethanol (CAS 111-76-2)Propan-2-ol (CAS 67-63-0)

US. New Jersey Worker and Community Right-to-Know Act2-Butoxyethanol (CAS 111-76-2)Propan-2-ol (CAS 67-63-0)

US. Pennsylvania Worker and Community Right-to-Know Law2-Butoxyethanol (CAS 111-76-2)Propan-2-ol (CAS 67-63-0)

US. Rhode Island RTK2-Butoxyethanol (CAS 111-76-2)Propan-2-ol (CAS 67-63-0)

US. California Proposition 65California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to containany chemicals currently listed as carcinogens or reproductive toxins.

International InventoriesCountry(s) or region Inventory name On inventory (yes/no)*

Australian Inventory of Chemical Substances (AICS) YesAustraliaDomestic Substances List (DSL) YesCanadaNon-Domestic Substances List (NDSL) NoCanadaInventory of Existing Chemical Substances in China (IECSC) YesChinaEuropean Inventory of Existing Commercial ChemicalSubstances (EINECS)

YesEurope

European List of Notified Chemical Substances (ELINCS) NoEuropeInventory of Existing and New Chemical Substances (ENCS) YesJapanExisting Chemicals List (ECL) YesKoreaNew Zealand Inventory YesNew ZealandPhilippine Inventory of Chemicals and Chemical Substances(PICCS)

YesPhilippines

*A "Yes" indicates this product complies with the inventory requirements administered by the governing country(s).A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governingcountry(s).

Toxic Substances Control Act (TSCA) Inventory YesUnited States & Puerto Rico

16. Other information, including date of preparation or last revision20-October-2016Issue date-Revision date

Version # 01Health: 2Flammability: 2Physical hazard: 0

HMIS® ratings


List of abbreviations LD50: Lethal Dose, 50%.TWA: Time weighted average.STEL: Short term exposure limit.IARC: International Agency for Research on Cancer.NTP: National Toxicology Program.IATA: International Air Transport Association.IMDG: International Maritime Dangerous Goods.OSHA: Occupational Safety and Health Administration.OEL: Occupational Exposure Limit.CAS Number: Chemical Abstracts Service Registry Number.Siskin Enterprises, Inc cannot anticipate all conditions under which this information and its product,or the products of other manufacturers in combination with its product, may be used. It is theuser’s responsibility to ensure safe conditions for handling, storage and disposal of the product,and to assume liability for loss, injury, damage or expense due to improper use. The information inthe sheet was written based on the best knowledge and experience currently available.

Disclaimer


WIN

DSH

IELDP

RE-TR

EATMEN

T

WIN

DSH

IELD

SAFETY DATA SHEET

1. IdentificationPermaPlate Windshield TreatmentProduct identifierNone.Other means of identificationGlass TreatmentRecommended useNone known.Recommended restrictions

Manufacturer/Importer/Supplier/Distributor informationCompany Name Siskin Enterprises, IncAddress P.O. Box 58

Salt Lake City, UT 84110Telephone Number 800.453.8470E-mail [email protected] Number 844.523.4089 Access Code: 12242

2. Hazard(s) identificationCategory 3Flammable liquidsPhysical hazards

Category 2Skin corrosion/irritationHealth hazardsCategory 2ASerious eye damage/eye irritationCategory 2Reproductive toxicity

Category 3Hazardous to the aquatic environment, acutehazard

Environmental hazards

Category 3Hazardous to the aquatic environment,long-term hazard

Not classified.OSHA defined hazards

Label elements

Signal word WarningHazard statement Flammable liquid and vapor. Causes skin irritation. Causes serious eye irritation. Suspected of

damaging fertility or the unborn child. Harmful to aquatic life with long lasting effects.Precautionary statement

Prevention Obtain special instructions before use. Do not handle until all safety precautions have been readand understood. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Keepcontainer tightly closed. Ground/bond container and receiving equipment. Use explosion-proofelectrical/ventilating/lighting equipment. Use only non-sparking tools. Take precautionarymeasures against static discharge. Wear protective gloves/protective clothing/eye protection/faceprotection. Wash thoroughly after handling. Avoid release to the environment.

Response If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.If skin irritation occurs: Get medical advice/attention. If in eyes: Rinse cautiously with water forseveral minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eyeirritation persists: Get medical advice/attention. If exposed or concerned: Get medicaladvice/attention. Wash contaminated clothing before reuse. In case of fire: Use appropriate mediato extinguish.

Storage Store in a well-ventilated place. Keep cool. Store locked up.

Disposal Dispose of contents/container in accordance with local/regional/national/international regulations.Hazard(s) not otherwiseclassified (HNOC)

None known.

Supplemental information None.

PermaPlate Windshield Treatment SDS US930618 Version #: 01 Revision date: - Issue date: 20-October-2016 1 / 8

3. Composition/information on ingredientsMixtures

64741-86-2 5 - 15Distillates, Petroleum,Sweetened Middle

CAS number %Chemical name

63148-62-9 0 - 10Polyalkyl siloxane

64742-89-8 0 - 5Solvent naphtha (petroleum),light aliph.

0.5The components are not hazardous or are below required disclosure limits.

N/A 0 - 1Amino Functional Silane

4. First-aid measuresMove to fresh air. Call a physician if symptoms develop or persist.InhalationTake off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritationoccurs: Get medical advice/attention. Wash contaminated clothing before reuse.

Skin contact

Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, ifpresent and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.

Eye contact

Rinse mouth. Get medical attention if symptoms occur.IngestionSevere eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurredvision. Skin irritation. May cause redness and pain.

Most importantsymptoms/effects, acute anddelayed

Provide general supportive measures and treat symptomatically. Keep victim under observation.Symptoms may be delayed.

Indication of immediatemedical attention and specialtreatment needed

Take off all contaminated clothing immediately. IF exposed or concerned: Get medicaladvice/attention. If you feel unwell, seek medical advice (show the label where possible). Ensurethat medical personnel are aware of the material(s) involved, and take precautions to protectthemselves. Show this safety data sheet to the doctor in attendance. Wash contaminated clothingbefore reuse.

General information

5. Fire-fighting measuresWater fog. Foam. Dry chemical powder. Carbon dioxide (CO2).Suitable extinguishing mediaDo not use water jet as an extinguisher, as this will spread the fire.Unsuitable extinguishing

mediaVapors may form explosive mixtures with air. Vapors may travel considerable distance to a sourceof ignition and flash back. During fire, gases hazardous to health may be formed.

Specific hazards arising fromthe chemical

Self-contained breathing apparatus and full protective clothing must be worn in case of fire.Special protective equipmentand precautions for firefighters

In case of fire and/or explosion do not breathe fumes. Move containers from fire area if you can doso without risk.

Fire fightingequipment/instructions

Use standard firefighting procedures and consider the hazards of other involved materials.Specific methodsFlammable liquid and vapor.General fire hazards

6. Accidental release measuresKeep unnecessary personnel away. Keep people away from and upwind of spill/leak. Eliminate allignition sources (no smoking, flares, sparks, or flames in immediate area). Wear appropriateprotective equipment and clothing during clean-up. Do not touch damaged containers or spilledmaterial unless wearing appropriate protective clothing. Ventilate closed spaces before enteringthem. Local authorities should be advised if significant spillages cannot be contained. For personalprotection, see section 8 of the SDS.

Personal precautions,protective equipment andemergency procedures


Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Keepcombustibles (wood, paper, oil, etc.) away from spilled material. Take precautionary measuresagainst static discharge. Use only non-sparking tools. Prevent product from entering drains.

Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this ispossible. Vapors can be contained by covering the spill with foam or sheeting. Use anon-combustible material like vermiculite, sand or earth to soak up the product and place into acontainer for later disposal. Following product recovery, flush area with water.

Small Spills: Absorb with earth, sand or other non-combustible material and transfer to containersfor later disposal. Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly toremove residual contamination.

Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS.

Methods and materials forcontainment and cleaning up

Avoid release to the environment. Inform appropriate managerial or supervisory personnel of allenvironmental releases. Prevent further leakage or spillage if safe to do so. Avoid discharge intodrains, water courses or onto the ground.

Environmental precautions

7. Handling and storageObtain special instructions before use. Do not handle until all safety precautions have been readand understood. Do not handle, store or open near an open flame, sources of heat or sources ofignition. Protect material from direct sunlight. When using do not smoke. Explosion-proof generaland local exhaust ventilation. Take precautionary measures against static discharges. Allequipment used when handling the product must be grounded. Use non-sparking tools andexplosion-proof equipment. Avoid contact with eyes, skin, and clothing. Avoid prolonged exposure.Pregnant or breastfeeding women must not handle this product. Should be handled in closedsystems, if possible. Wear appropriate personal protective equipment. Avoid release to theenvironment. Observe good industrial hygiene practices.

Precautions for safe handling

Store locked up. Keep away from heat, sparks and open flame. Prevent electrostatic chargebuild-up by using common bonding and grounding techniques. Store in a cool, dry place out ofdirect sunlight. Store in original tightly closed container. Store in a well-ventilated place. Keep in anarea equipped with sprinklers. Store away from incompatible materials (see Section 10 of theSDS).

Conditions for safe storage,including any incompatibilities

8. Exposure controls/personal protectionOccupational exposure limits

US. ACGIH Threshold Limit Values

ValueType FormComponentsTWA 5 mg/m3 Inhalable fraction.Distillates, Petroleum,

Sweetened Middle (CAS64741-86-2)

No biological exposure limits noted for the ingredient(s).Biological limit valuesExplosion-proof general and local exhaust ventilation. Good general ventilation (typically 10 airchanges per hour) should be used. Ventilation rates should be matched to conditions. Ifapplicable, use process enclosures, local exhaust ventilation, or other engineering controls tomaintain airborne levels below recommended exposure limits. If exposure limits have not beenestablished, maintain airborne levels to an acceptable level. Eye wash facilities and emergencyshower must be available when handling this product.

Appropriate engineeringcontrols

Individual protection measures, such as personal protective equipmentWear safety glasses with side shields (or goggles).Eye/face protection

Skin protectionWear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glovesupplier.

Hand protection

Skin protectionWear appropriate chemical resistant clothing. Use of an impervious apron is recommended.Other

In case of insufficient ventilation, wear suitable respiratory equipment.Respiratory protectionWear appropriate thermal protective clothing, when necessary.Thermal hazards

Observe any medical surveillance requirements. When using do not smoke. Always observe goodpersonal hygiene measures, such as washing after handling the material and before eating,drinking, and/or smoking. Routinely wash work clothing and protective equipment to removecontaminants.

General hygieneconsiderations


WIN

DSH

IELD

9. Physical and chemical properties AppearanceLiquid.Physical stateLiquid.FormClear.ColorSolvent odor.Odor

Odor threshold Not available.

pH Not available.

Melting point/freezing point Not available.

Initial boiling point and boilingrange

Not available.

Flash point > 104.0 °F (> 40.0 °C) Tag Closed Cup

Evaporation rate Not available.Not applicable.Flammability (solid, gas)

Upper/lower flammability or explosive limitsFlammability limit - lower(%)

1 %

Flammability limit - upper(%)

Not available.

Vapor pressure 8.2 mm Hg at 20°C

Vapor density 5 [Air =1]

Relative density 1.151 [Water =1]

Solubility(ies)Solubility (water) Not available.

Partition coefficient(n-octanol/water)

Not available.

Auto-ignition temperature 490 °F (254.44 °C)

Decomposition temperature Not available.

Viscosity Not available.

Other informationDensity 9.58 lb/gal

Not explosive.Explosive propertiesNot oxidizing.Oxidizing properties

VOC < 3 % Using CARB (California Air Resources Board Rules)

10. Stability and reactivityThe product is stable and non-reactive under normal conditions of use, storage and transport.ReactivityMaterial is stable under normal conditions.Chemical stabilityNo dangerous reaction known under conditions of normal use.Possibility of hazardous

reactionsAvoid heat, sparks, open flames and other ignition sources. Avoid temperatures exceeding theflash point. Contact with incompatible materials.

Conditions to avoid

Strong oxidizing agents.Incompatible materialsThermal decomposition can produce carbon monoxide, carbon dioxide, silicon dioxide fromburning.

Hazardous decompositionproducts

11. Toxicological informationInformation on likely routes of exposure

Inhalation Prolonged inhalation may be harmful.

Skin contact Causes skin irritation.

Eye contact Causes serious eye irritation.

Ingestion Expected to be a low ingestion hazard.


Symptoms related to thephysical, chemical andtoxicological characteristics

Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurredvision. Skin irritation. May cause redness and pain.

Information on toxicological effectsAcute toxicity Not expected to be acutely toxic by ingestion, inhalation or in contact with the skin or eyes.

Test ResultsComponents SpeciesPolyalkyl siloxane (CAS 63148-62-9)

LD50 RabbitDermalAcute

> 5000 mg/kg

LD50 RatOral

> 17000 mg/kg

Causes skin irritation.Skin corrosion/irritationCauses serious eye irritation.Serious eye damage/eye

irritationRespiratory or skin sensitization

Respiratory sensitization Not a respiratory sensitizer.This product is not expected to cause skin sensitization.Skin sensitizationNot classified.Germ cell mutagenicity

Carcinogenicity Not expected to cause cancer.

IARC Monographs. Overall Evaluation of CarcinogenicityNot listed.

NTP Report on CarcinogensNot listed.


Suspected of damaging fertility or the unborn child.Reproductive toxicitySpecific target organ toxicity -single exposure

Not classified.

Specific target organ toxicity -repeated exposure

Not classified.

Aspiration hazard Due to partial or complete lack of data the classification is not possible.

Chronic effects Prolonged inhalation may be harmful.

12. Ecological informationHarmful to aquatic life with long lasting effects.Ecotoxicity

Components Test ResultsSpeciesDistillates, Petroleum, Sweetened Middle (CAS 64741-86-2)

AquaticChronic

NOAELFish 0.069 mg/l, 14 daysOncorhynchus mykiss

No data is available on the degradability of this product. Persistence and degradability Bioaccumulative potentialExpected to be slightly to moderately mobile in soil.Mobility in soil

Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creationpotential, endocrine disruption, global warming potential) are expected from this component.

13. Disposal considerationsCollect and reclaim or dispose in sealed containers at licensed waste disposal site. Do not allowthis material to drain into sewers/water supplies. Do not contaminate ponds, waterways or ditcheswith chemical or used container. Dispose of contents/container in accordance withlocal/regional/national/international regulations.

Disposal instructions

Dispose in accordance with all applicable regulations.Local disposal regulations


WIN

DSH

IELD

The waste code should be assigned in discussion between the user, the producer and the wastedisposal company.

Hazardous waste code

Dispose of in accordance with local regulations. Empty containers or liners may retain someproduct residues. This material and its container must be disposed of in a safe manner (see:Disposal instructions).

Waste from residues / unusedproducts

Since emptied containers may retain product residue, follow label warnings even after container isemptied. Empty containers should be taken to an approved waste handling site for recycling ordisposal.

Contaminated packaging

14. Transport informationDOT

UN1993UN numberFlammable liquids, n.o.s. (Solvent naphtha (petroleum), light aliph.)UN proper shipping name


-Subsidiary risk3Label(s)IIIPacking group


Read safety instructions, SDS and emergency procedures before handling.Special precautions for userB1, B52, IB3, T4, TP1, TP29Special provisions150Packaging exceptions203Packaging non bulk242Packaging bulk

IATAUN1993UN numberFlammable liquid, n.o.s. (Solvent naphtha (petroleum), light aliph.)UN proper shipping name


-Subsidiary riskIIIPacking groupNoEnvironmental hazards3LERG CodeRead safety instructions, SDS and emergency procedures before handling.Special precautions for user

IMDGUN1993UN numberFLAMMABLE LIQUID, N.O.S. (Solvent naphtha (petroleum), light aliph.)UN proper shipping name


-Subsidiary riskIIIPacking group


F-E, S̲-E̲EmSRead safety instructions, SDS and emergency procedures before handling.Special precautions for userNot established.Transport in bulk according to

Annex II of MARPOL 73/78 andthe IBC Code

15. Regulatory informationThis product is a "Hazardous Chemical" as defined by the OSHA Hazard CommunicationStandard, 29 CFR 1910.1200.

US federal regulations

TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)Not regulated.


CERCLA Hazardous Substance List (40 CFR 302.4)Not listed.


Superfund Amendments and Reauthorization Act of 1986 (SARA)Immediate Hazard - YesDelayed Hazard - YesFire Hazard - YesPressure Hazard - NoReactivity Hazard - No

Hazard categories

SARA 302 Extremely hazardous substanceNot listed.

YesSARA 311/312 HazardouschemicalSARA 313 (TRI reporting)

Not regulated.

Other federal regulationsClean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List

Not regulated.Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130)

Not regulated.Not regulated.Safe Drinking Water Act

(SDWA)US state regulations

US. Massachusetts RTK - Substance ListNot regulated.

US. New Jersey Worker and Community Right-to-Know ActNot listed.

US. Pennsylvania Worker and Community Right-to-Know LawNot listed.

US. Rhode Island RTKNot regulated.

US. California Proposition 65California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to containany chemicals currently listed as carcinogens or reproductive toxins.

International InventoriesCountry(s) or region Inventory name On inventory (yes/no)*

Australian Inventory of Chemical Substances (AICS) YesAustraliaDomestic Substances List (DSL) YesCanadaNon-Domestic Substances List (NDSL) NoCanadaInventory of Existing Chemical Substances in China (IECSC) YesChinaEuropean Inventory of Existing Commercial ChemicalSubstances (EINECS)

NoEurope

European List of Notified Chemical Substances (ELINCS) NoEuropeInventory of Existing and New Chemical Substances (ENCS) NoJapanExisting Chemicals List (ECL) YesKoreaNew Zealand Inventory YesNew ZealandPhilippine Inventory of Chemicals and Chemical Substances(PICCS)

YesPhilippines

*A "Yes" indicates this product complies with the inventory requirements administered by the governing country(s).A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governingcountry(s).

Toxic Substances Control Act (TSCA) Inventory YesUnited States & Puerto Rico

16. Other information, including date of preparation or last revision20-October-2016Issue date-Revision date

Version # 01


WIN

DSH

IELD

Health: 2*Flammability: 2Physical hazard: 0

HMIS® ratings

List of abbreviations TWA: Time weighted average.CAS: Chemical Abstracts Service.OEL: Occupational Exposure Limit.LD50: Lethal Dose, 50%.IATA: International Air Transport Association.IMDG: International Maritime Dangerous Goods.Siskin Enterprises, Inc cannot anticipate all conditions under which this information and its product,or the products of other manufacturers in combination with its product, may be used. It is theuser’s responsibility to ensure safe conditions for handling, storage and disposal of the product,and to assume liability for loss, injury, damage or expense due to improper use. The information inthe sheet was written based on the best knowledge and experience currently available.

Disclaimer



PRODUCT APPLICATION INSTRUCTIONS Step One: Prep and Clean –

Use PermaPlate Windshield Pre-Treatment to ensure there is no interference between surface contaminants and PermaPlate Windshield Treatment. Spray glass surface with PermaPlate Windshield Pre-Treatment and wipe thoroughly until glass is dry and streak-free.

Step Two: Apply –

Apply PermaPlate Windshield Treatment directly onto application sponge then spread evenly onto windshield in a cross-hatch fashion.

Step Three: Remove Excess –

After 3-4 minutes following application, remove excess PermaPlate Windshield Treatment with a clean micro-fiber cloth until surface is dry and clear of application marks.

Step Four: Repeat Steps Two and Three –

Repeat with no variations. Do not expose treated glass to water for at least 30 minutes to allow product to completely cure.

Note: Apply product only to the outside surface of the windshield.

Use only on cool surfaces. Never apply in direct sunlight. Use clean applicator for each application. Use clean micro-fibers for prep and removal of excess.

Do not allow PermaPlate Windshield Treatment to completely dry on glass before removing.

PR

OD

UC

TA

PP

LICATION

INSTR

UC

TION

S

permaplate windshield protection procedure manual › wp-content › uploads › 2016 › 11 ›...

Documents