pegasus spec completed 03-22-2010

3
Technical Specification Description: The Pegasus drill is a compact ITH drill unitized with an on board booster mounted on a mobile center articulated carrier. Due to reduced power requirements associated with its hydrostatic drive, this drill is the most compact in its class. Performance: The Pegasus drill can be used to drill from 3 5/8 in. ( 92mm ) to 7 in. ( 2 16mm ) diameter holes to a depth greater than 330 ft. ( 1 00m ) down hole. The Pegasus is also able to be fitted for 30 ” reaming with a V-30 attachment. Accra Feed and ERIS panel The inclusion of Accra Feed on Cubex underground drills has increased overall drill performance by providing optimal pressure to the bit in all rock conditions. Lost drill string situations are reduced and overall hole integrity is improved. All the hydraulic control functions are electric/hydraulic controlled through the CAN-BUS controller/computer and programmable modules – this provides more robust mechanical connections in the wiring harnesses. The Cubex ERIS system is set up so that mine managers and engineers are able access the benefits of an expandable control platform. This unit has proven to be very reliable, while providing a high degree of productivity. Main Specifications Carrier Pegasus Safety Canopy Top Drive 6230 Mast Standard mast, fixed centralizer Carousel 16 drill pipes (up to 4 in. pipe) Positioning System Single Slideover Control System ERIS Panel Powerpack 50 hp 37 kW Hammer Lubrication ASPegasus Air Booster 99CX—Reciprocating Water Injection System 27 lpm (48 bar) | 7 gal/min (700 psi) Tramming length 8.2 m 323 in. Tramming width 2.0 m 79 in. Tramming height 2.5 m 98 in. Weight 22 700 kg 50 000 lb Tramming speed, diesel Horizontal 7 Kph 4.3 mph Speed at 15% grade 7 Kph 4.3 mph Tramming speed, electric Horizontal only 1 Kph 0.6 mph Max Gradeability 35% FOPS/ROPS (telescopic) PEGASUS Top Drive Top Drive 6230 Max working pressure 207 bar 3000 psi Max torque 5730 Nm 4225 lb.ft. Rotation Speed 080 rpm Patented splined piston breakout system UNDERGROUND DRILLS 403-29 R10A—03/22/2010

Upload: death666dark

Post on 23-Sep-2015

16 views

Category:

Documents


3 download

DESCRIPTION

pegasus

TRANSCRIPT

  • Technical Specification

    Description: The Pegasus drill is a compact ITH drill unitized with an on board booster mounted on a mobile center articulated carrier. Due to reduced power requirements associated with its hydrostatic drive, this drill is the most compact in its class. Performance: The Pegasus drill can be used to drill from 3 5/8 in. ( 92mm ) to 7 in. ( 2 16mm ) diameter holes to a depth greater than 330 ft. ( 1 00m ) down hole. The Pegasus is also able to be fitted for 30 reaming with a V-30 attachment.

    Accra Feed and ERIS panel The inclusion of Accra Feed on Cubex underground drills has increased overall drill performance by providing optimal pressure to the bit in all rock conditions. Lost drill string situations are reduced and overall hole integrity is improved. All the hydraulic control functions are electric/hydraulic controlled through the CAN-BUS controller/computer and programmable modules this provides more robust mechanical connections in the wiring harnesses. The Cubex ERIS system is set up so that mine managers and engineers are able access the benefits of an expandable control platform. This unit has proven to be very reliable, while providing a high degree of productivity.

    MainSpecificationsCarrier Pegasus

    SafetyCanopy

    TopDrive 6230

    Mast Standardmast,fixedcentralizer

    Carousel 16drillpipes(upto4in.pipe)

    PositioningSystem SingleSlideover

    ControlSystem ERISPanel

    Powerpack 50hp 37kW

    HammerLubrication ASPegasus

    AirBooster 99CXReciprocating

    WaterInjectionSystem 27lpm(48bar)|7gal/min(700psi)

    Tramminglength 8.2m 323in.

    Trammingwidth 2.0m 79in.

    Trammingheight 2.5m 98in.

    Weight 22700kg 50000lb

    Trammingspeed,diesel

    Horizontal 7Kph 4.3mph

    Speedat15%grade 7Kph 4.3mph

    Trammingspeed,electric

    Horizontalonly 1Kph 0.6mph

    MaxGradeability 35%

    FOPS/ROPS(telescopic)

    PEGASUS

    TopDriveTopDrive 6230

    Maxworkingpressure 207bar 3000psi

    Maxtorque 5730Nm 4225lb.ft.

    RotationSpeed 080rpm

    Patentedsplinedpistonbreakoutsystem

    UNDERGROUND DRILLS

    403-29 R10A03/22/2010

  • CubexLtd1218RedondaStreet,P.O.Box13Group524,RR5Winnipeg,Manitoba,CanadaTel.+2046945505,Fax+2046330665www.cubex.net

    Cubex Pegasus Technical Specification

    CubexLtdreservestherighttochangethisspecificationwithoutfurthernotice.

    Standard Specifications

    CarrierDieselengine

    Transmission DanfossHydrostatic

    Hydraulicpumpdrive 1x60ccVariabledisplacementaxialpistonpump

    3.7cu.in./rev

    Axles DanaSpicer123

    Brakes

    Service SAHR Parking SAHR Tires 12.00x20ITLSolidRubber

    Steering FrameSteering,hydraulic

    Articulation 40

    Rearoscillation 10

    Groundclearance 23cm 9in.

    Fueltank 114L 30us.gal

    Hydraulicjacks 2front,2rear

    Safetycanopy FOPS/ROPS(telescopic)

    Centralizedgreaselubrication

    Mercedes904(130kW)TierIII

    Mast Standardmast,fixedcentralizer

    FeedForce 70kN 15800lbs

    MaxOpening 222mm 8.75in.

    Mast

    CarouselCarousel 16drillpipes(forupto4in.pipe)

    PositioningSystemSingleslideover 762mm 30in.

    Feedextension 1370mm 54in.

    Swingangle 360

    Top 1830mm 6ft. Bottom 610mm 2ft.

    Stingerextension

    Grease/oilinjection

    MeteringCapacity 4l/hr 1us.gal/hr

    Tanksize 20l 5.3us.gal

    HammerLubricationSystem

    BoosterType 99CXReciprocating

    Electricmotor 1x75kW 1x100hp

    Maxworkingpressure 27.6bar 400psi

    FAD,Maxworkingpressure

    20m/min 700cfm

    Inletpressure 6bar 90psi

    AirBooster

    WaterInjectionSystemWaterpumptype

    Capacity 27lpm(48bar) 7gal/min(700psi)

    Inletpressure 27bar(drilling) 30100psi(drilling)

    Triplexpistonpump

    ElectricalSystemTotalinputpower 112kW

    Standardvoltages 600VAC(380600VACavailable)

    Frequency 60Hz(50HzAvailable)

    Lights Working

    lights2x55WHID

    Drivinglights 4x65W Starter Deltawye SafetyShutdowns Lowmineairpressure

    LowminewaterpressureLowcompressoroilpressureHighdischargeairtemperatureLowhydraulicoillevelHighoiltemperature

    Safetyfeatures Tramactivestrobeandbackupalarm

    PowerpackElectricmotor 1x37kW 1x50hp

    Pumptype 1x100ccVariabledisplacementaxialpistonpump

    6.1cu.in./rev

    Filtration

    Pressure 1x5micron Return 1x10micron Oiltankvolume 170L 44us.gal

    Tankfilling Electricfillpump

    Oilcooling Shellandtubecooler

    ControlSystemControlSystem ErisPanelCanBus

    AccraFeed Feedandrotationcontrol/Antijamming

    RemoteControl Tripodmounted,with30m(100ft)cable

    403-29 R10A03/05/2010

  • CubexLtd1218RedondaStreet,P.O.Box13Group524,RR5Winnipeg,Manitoba,CanadaTel.+2046945505,Fax+2046330665www.cubex.net

    Cubex Pegasus Technical Specification

    CubexLtdreservestherighttochangethisspecificationwithoutfurthernotice.

    Carousel PipeSize

    16DrillPipe 76127mm 35in.

    21DrillPipe 76127mm 35in.

    24DrillPipe 76114mm 35in.

    26DrillPipe 76102mm 34in.

    30DrillPipe 76102mm 34in.

    OptionalCarousels

    PositioningSystemsOptionsPositioningSystemDoubleSlideover

    Parallelcoverage 1524mm 60in.

    50/50Stingers

    Top 1219mm 4ft. Bottom 1219mm 4ft.

    OptionalAirBoosters AirBoosterS92Screw AirBoosterS112Screw

    Electricmotor 1x92kW(125hp) 1x112kW(150hp)

    Maxworkingpressure 27.6bar(400psi) 24.1bar(350psi)

    FAD,Maxworkingpressure

    18.4m/min(650cfm) 29.7m/min(1050cfm)

    Inletpressure 6bar(90psi) 6bar(90psi)

    Selection of Optional Equipment

    OptionalMastsMasts FeedForce MaxOpening DrillPipeLengths

    StandardMast,(FixedorSplitCentralizer) 70kN 15800lbs 222mm 8.75in. 4/5/6

    HeavyMast(FixedorSplitCentralizer) 133kN 30000lbs 222mm 8.75in. 4/5/6

    OptionalTopDrive 6230RB30RTopDrive

    Maxworkingpressure

    207bar(3000psi)

    Maxtorque 8520Nm(6283lb.ft.)

    RotationSpeed 050rpm

    PipeHandlingOptionsPipeArm,SingleAxis Toassistmanual

    pipehandling PipeArm,DualAxis*Pipearmisnotcompatiblewithcarousel

    FireSuppressionAutomatic AnsulSystem(10nozzles)

    Manual AnsulSystem(10nozzles)

    AdditionalOptions

    GroundfaultmonitorIndicatorforlowlevelhammerlubricant

    Onboardpressurewasher Petolchainwrench Remotethreadlubrication RPMindicatorfortopdrive SpecialElectrics380600VAC50or60Hzavailable

    Sparerim/tire Stainlesssteelelectricalpanel

    Toolstospecifications Wassarawaterhammerpackage

    Wheelchocks

    Alignmentlaser Angleindicators Autolubrication(Lincoln) Cablereelwithautomaticcablelimitstop(cableandpowerplugnotsupplied)

    Cuttingsdiverter(forusewithblindboringmast)

    Fastfillingandevacuationsystem(Wiggins)forfuelonly

    Fastfillingandevacuationsystem(Wiggins)forengineoil,hydraulicoil,transmissionoilcoolant,fuel

    ReverseCirculationOptionDischargeDiameter 76mm 3in

    MaxIDofcentretube 64mm 2.5in

    6230RCTopDrive RCswivel

    HydraulicCentralizerswithRCslipplateanddualtorque

    BlindBorePackage

    HeavyHoistmast5ftor6ftrodscanbeusedwiththeBlindBorepackage

    SpacerfortopdriveExtendstopdrivetoallowfortheuseoflargehammersandreamers

    HydraulicswingoutcentralizerAllowspassingofalargeITHhammerwhenswungoutoftheway

    403-29 R10A03/05/2010