pcm savenrg, rgees llc
DESCRIPTION
Presentation about savENRG PCM.TRANSCRIPT
1
GREENERGIZE your packaging
2
From WikipediaA phase change material (PCM) is a substance with a high
heat of fusion. It is capable of storing and releasing large amounts of energy while melting and solidifying at a certain temperature. Heat is absorbed when the material changes from solid to liquid and released when the state changes from liquid to solid; thus,
PCMs are classified as latent heat storage (LHS) units.
Phase change occurs at a relatively constant temperature.
PCM – Phase Change MaterialPCM – Phase Change Material
3
GREENERGIZE your packaging
4
• Consumption of PCM products on large scale is expected to reduce energy demand by up to 50% by 2050
• By incorporating PCM in different applications, companies can earn 10-20times more carbon credits compared to other green material
• Most of the available PCM have a long operating life of about 20 to 30 years and need very little maintenance
• PCM have 5 to 6 times more heat storage capacity compared to other materials
Source: Advanced Phase Change Material (PCM) Market Global Forecast (2010 – 2015) by MarketsandMarkets
PCM a sustainable technologyPCM a sustainable technology
4
55
Types of Phase Change MaterialsTypes of Phase Change Materials
Inorganic – Salt Hydrates Organic – Petroleum Based
Latent Heat High High HighToxicity Non-Toxic Toxic Non-ToxicFlammability Non-Flammable Yes YesCorrosion Yes N/A N/AStability Yes Yes YesRenewable Yes No YesBiodegradable water based N/A Yes
Organic – Biobased
6
• Inorganic salt hydrates, organic materials & bio-based• High latent heat storage• Economical cost• Non-toxic and non-combustible• Low or no flammability• Stable performance during phase-change cycles• Energy is stored both as latent heat & sensible heat• High stability over long period of time and cycles• Limited or no super cooling• Macro-encapsulated & Micro-encapsulated products
savEnrg™savEnrg™– Phase Change Material– Phase Change Material
7
savEnrg™savEnrg™– Phase Change – Phase Change Material Material Latent Heat KJ/KgLatent Heat KJ/Kg
8
savEnrg™savEnrg™– Phase Change – Phase Change Material Material Kg/KWhKg/KWh
9
• PCM based Latent Heat
Storage technology enables
thermal energy storage that
can be used for heating or
cooling needs when and
where needed.
PCM for Energy StoragePCM for Energy Storage
9
10
• PCM based Latent Heat
Storage technology allows for
temperature control within +/-
5 degree Celsius of phase
change temperature.
PCM for Temperature ControlPCM for Temperature Control
10
11
PCM ApplicationsPCM Applications
POSITIVE TEMPERATURE APPLICATION
Chilled Food Transportation
Beverage Cooling & Vending Machines
Medicine & Vaccine transportation
Air Conditioning, Passive Cooling in buildings
Water Heating, Solar Thermal Storage, Waste Heat Storage, Heat Sink
Telecommunication Shelter Cooling, Electronic Enclosure Cooling, Battery Cooling
NEGATIVE TEMPERATURE APPLICATION
Temperature Controlled Packaging
Frozen Food Transportation
Ice Cream Vending
Medicine & Vaccine transportation
Marine Refrigeration
Cold Storage
Thermal Energy Storage.
11
12
PCM for Temperature Controlled PCM for Temperature Controlled PackagingPackaging
The industry uses the gel-pack; ice and dry-ice
Consumers are looking for better methods to:
• control temperature• reduce shipping weight• reduce packaging waste• reduce carbon footprint
Some are using qualified containers which use higher quality insulating material and PCM for effective temperature control
12
13
• Saves Energy
– sharp phase change temperature– negligible super cooling– stores energy during off peak
• Predictable and large energy storage
• PCM quantity can be calculated to optimize shipping weight
– predictable duration of temperature control• Enables temperature control within +/- 5 degree C
• Increase Payload capacity
• Safe for Transportation - Non-Toxic and Non-Combustible
• Economical & Eco-friendly & Recyclable
savEnrg™ savEnrg™ PCM Advantages PCM Advantages
13
14
Performance Specifications:
- Effective reinforcement to restrain the walls against swelling- When frozen and laid flat, the packs do not exceed the uniform thickness by more
than 25% (any deformation is reversible)- Packs withstand one meter drop onto every face, edge and corner when frozen
to -25° C and cooled to +5° C- Unfrozen packs, including cap, can resist a lateral force of 80Kg- Packs are constructed of uncolored translucent material
General Specifications:- Packs do not bond together when stacked and frozen in bulk- Packs and cap made of UV resistant and environmentally friendly material
Environmental Specifications:
- Ambient temperature range during transport, storage and use -30 to 55 degree C
- Ambient humidity range during transport, storage and use 5% to 95% RH
savEnrg™ savEnrg™ PCM Encapsulation PCM Encapsulation
14
15
savEnrg™ - Ice-Packs (IP) Temperature control < – 15ºC
savEnrg™ - Cool-Packs (CP) Temperature control from +2ºC to +8º C
savEnrg™ - Warm-Packs (WP) Controlled Room Temperature from +18ºC to +26ºC
savEnrg™ savEnrg™ PCM Range of PCM Range of ProductsProducts
15
16
Ideal to transport products at temperatures below -15°C.
Uses PCM23N
Freeze completely at temperatures below -28°C.
Latent heat capacity of 200KJ/Kg.
Safe substitute for Dry Ice and propylene glycol
Non-toxic and non flammable
Tested for 3000 cycles
savEnrg™ savEnrg™ PCM Ice - Packs PCM Ice - Packs
16
17
T-History
-33
-23
-13
-3
7
17
1 9 17 25 33 41 49 57 65 73 81 89 97 105 113 121 129 137 145 153
Time in Min
Tem
p in
Deg
Cel
Bath PCM 23N
PCM 23N for Ice - PacksPCM 23N for Ice - Packs
17
18
PCM 23N for 24Hr Winter PCM 23N for 24Hr Winter Below -15C in 12”x9”x9” Qualified Shipper ISTA7DBelow -15C in 12”x9”x9” Qualified Shipper ISTA7D
18
19
PCM 23N for 24Hr Summer PCM 23N for 24Hr Summer Below -15C in 12”x9”x9” Qualified Shipper ISTA7DBelow -15C in 12”x9”x9” Qualified Shipper ISTA7D
19
20
Ideal to transport products between +2°C to +8°C.
Uses PCM00P
Freezes completely at temperatures below -3°C. No super cooling required.
Latent Heat Storage capacity 290KJ/Kg
Energy efficient alternate to traditional gel based cool packs.
Non-toxic and non flammable.
Tested for 5000 cycles
savEnrg™ savEnrg™ PCM Cool - Packs PCM Cool - Packs
20
21
T-History
-6
0
6
12
18
24
30
1 11 21 31 41 51 61 71 81 91 101 111 121 131 141 151 161 171 181 191 201 211
Time in Min
Tem
p in
Deg
Cel
Bath PCM 00P
PCM 00P for Cool - PacksPCM 00P for Cool - Packs
21
22
PCM Cool – Pack ApplicationPCM Cool – Pack Application
Frost Perform ance w ith TSM6 in12x12x16Box
0
5
10
15
20
25
0 5 10 15 20 25 30 35 40 45
Tim e in hours
Tem
p in
Deg
C
Ambient TSM6-Readings (°C)
Box Size (L x W x H): 16” x 12” x 12” Insulation thickness : 2” inch Insulation material : EPS Panels
TSM6 (LxWxH): 165x95x35mm
PCM quantity : 1.0 kg (in 2 containers)
23
PCM 00P for 24Hr SummerPCM 00P for 24Hr Summer
24
Ideal to transport products at controlled room temperature.
PCM 22P
Completely freeze at temperatures below +16°C.
Latent Heat Storage capacity 185KJ/Kg
In hot ambient shipping environments, maintain temperatures between +22°C and +27°C
In cold ambient shipping environments, maintain temperatures between +18°C and +22°C .
Non-toxic and non- flammable
Tested for 3000 cycles
savEnrgsavEnrg™ ™ PCM Warm - Packs PCM Warm - Packs
24
25
T-History
15171921232527
1 17 33 49 65 81 97 113 129 145 161 177 193 209 225 241 257 273 289 305 321 337 353 369 385 401 417
Time in Min PCM 22P BATH
Temp in
Deg C
PCM 22P for Warm - PacksPCM 22P for Warm - Packs
25
26
22P PCM Performance in EPS Box (TSM6 Pack)
-7
-2
3
8
13
18
23
0 2 4 6 8 10 12 14 16 18 20Time in hours
Temp
in D
eg C
Am bient Tem p Inside EPS Box
PCM Warm – Pack ApplicationPCM Warm – Pack Application
26
Box Size (LxWxH): 16”x12”x12” Insulation thickness : 2” inch Insulation material : EPS Panels
TSM6 (LxWxH): 190x120x36mm
PCM quantity : 1.5 kg (in 2 TSM6 Bottles)
27
PCM 22P for 24Hr WinterPCM 22P for 24Hr Winter
27
28
savEnrg™ savEnrg™ PCM Product PCM Product SpecificationsSpecifications
28
29
• Development of customized PCM product
• Selection and sizing of PCM for insulated shippers
R & D ServicesR & D Services
29
30
Thank you
Phase Change Materials
RGEES LLC1465 Sand Hill Road, Suite # 171,
Candler, NC 28715United States of America
Tel: [email protected]
30