Visit us at www.dekoroncable.com

Instrument Pairs/triads

Thermocouple Extension grade

High Temperature

Control UL - multi-conductor

CSA - multi conductor (Teck 90®)

UL 1309 Shipboard Instrumentation, Type X Cables, 300V or 600V

Foundation Field-Bus Cables 2-Way digital communication cable

Circuit Integrity Instrument and Control Cable

Sensor Cables UL - multi-conductor (Power-Gen industry)

UL: 300V or 600V, PLTC/ITC, ICEA S-73-532 C(UL) Type ACIC 600V CSA CIC (600V) ACIC AS/NZS 5000.1 – 600/1000V AS/NZS 5000.3 – 450V /750V AS/NZS 3808 UL:PLTC

UL Type TC (Tray Cable) UL Type MC (Metal Clad) ICEA S-73-532 AS/NZS 5000.1 – 600/1000V AS/NZS 5000.3 – 450V /750V AS/NZS 3808

CSA CIC 600V

TC-ER UL 1309 IEEE 1583

FF-844 H1 and IEC 61158-2 ITC, PLTC ITC-ER, PLTC-ER,

UL PLTC/ITC ICEA S-73-532 UL Type TC (Tray Cable) IEC 60331

UL Type TC (Tray Cable)

Shield Options

22-12 AWG Bare and Plated Copper,

solid and stranded

Type KX, JX, EX, TX, NX AND SX 20-16 AWG, solid and stranded

Copper or Thermocouple conductors as indicated above.

20-6 AWG

14-10 AWG

AWG 22 - 10 (300V) AWG 18 - 10 (600V)

16-18 AWG

20-10 AWG

16-10 AWG, Copper & plated Cu

PVC PVC/Nylon XLPE (Cross-linked PE) TPE (Thermoplastic Elastomer)

FEP (200°C) PFA (260°C)

PVC PVC/Nylon

XLPE Silicone

PVC XLPE

XLPE

XLPE or HDXLPE

Silicone Alloy

PVC PVC/Nylon Fluopolymers (FP)

* Armor designations

PVC CPE LSZH PE

FEP PFA

PVC CPE

LSZH

PVC

PVC

PVC CPE TPN (LSZH)

Thermo-Plastic Zero-Halogen

PVC CPE FP

SWA, ILA, ILGS, DKB, CCWA (Gardex), SS

SS

Only UL Type MC allows ILA, ILGS and CCWA

ILA, ILGS

N/A

ILGS, ILA, DKB, CCWA

SWA, ILA, ILGS, DKB, CCWA (Gardex), SS

SS

1 to 100 Pairs 3.7" max diameter for jacketing, 3.25" max dia for SWA, 1.75" max dia for ILGS & .800" max dia for CCWA

Contact us

Same as instrumentation cables (depending on gage)

Single and multi pair

** Approval standards: Not all approvals are available for all combinations of insulation and armor types

ILA Interlocked Aluminum ILGS Interlocked Galvanized Steel SWA Served Wire Armor (Galvanized Steel) DKB Dekabon Chemical/Moisture Barrier (Zetabon)CCWA Gardex ® Continuously Corrugated & Welded AlSS Stainless Steel Overbraid

**

Available upon Request:

"-50°C Arctic Grade" jacket -40°C UL approved cables ITC-ER, PLTC-ER, Direct Burial, Low Smoke Zero Hal

TC-ER MC-HL

Cables pass IEC 60331 90 minutes 750°C and Modified Hydro Carbon Fuel test (1100°C for 20 minutes)

ATEX and IECEx Compliant, Gas-Block™ Cables

Ind and O/A, Al/Poly taped shield. Copper and bronze tapes, Braided copper and plated copper

Instrumentation cables come in multiple twisted pair configurations with each pair gathering one set of process data. Our cables are used worldwide in petro-chemical and refining industries, such as BP, Valero, Exxon, Aramco, Conoco-Phillips and Star Petroleum. We have a large number of part numbers in stock, but we can also build cables with any of your specific customizations.

Instrumentation Cables

Multi-pair instrumentation cable with individual and overall shield

Multi-pair instrumentation cable with served wire armor of galvanized steel

We have the most reputed brand name for instrumentation cables. Dekoron Wire and Cable pioneered the development of instrumentation cables for process industry starting in the 1940’s. These cables monitor process parameters such as pressure, flow speed, temperature and transmit low voltage signals to the instrumentation and process control room.

Fieldbus cable are all digital, two way, multi-drop communication cables used in field instruments and control systems.

Field Bus Cables

Control Cables

When regulatory requirements do not mandate conventional metal armor, braided stainless steel is a less expensive option. Stainless steel braid will provide excellent abrasion resistance and flexibility.

Braided Stainless Steel

Stainless Steel Over Braid

Visit us at www.dekoroncable.com

Dekoron offers a wide range of specialty and composite cables that will suit your needs. We can also provide a combination of data (Cat5 or Cat6) cables and fiber cables along with instrumentation cables under one common armor.

Specialty and Composite Cable

Cable with power, data and tubing components with served wire armor

Custom Cable Category Cable with Gardex armor

The Gardex armor meets the UL MC-HL, Class I Division I criteria and is widely popular in the US for hazardous location applica-tions. We have the ability to apply this type of armor to a variety of cables. See CCWA armor in the data tables.

Gardex® Cables