parker series 2a air cylinder - hidranaven.comparker series 2a air cylinder when the job calls for...
TRANSCRIPT
For additional information – call your local Parker Cylinder Distributor.
16
Parker Series 2AAir CylinderWhen the job calls for reliable, heavy-dutyperformance, specify Series 2A. A 100,000 psiyield strength chrome-plated, case-hardenedpiston rod. A 125,000 psi yield strength rod-endstud with rolled threads. 100,000 psi yieldstrength tie rods. With construction like this, theParker Series 2A is rated for air service to 250psi. This is one heavy-duty air cylinder that'sreally heavy duty.
They're truly premium quality cylinders, factoryprelubricated for millions of maintenance-freecycles. And to make sure every cylinder ispremium quality, we subject each and every one– not just batch samples – to tough inspectionand performance tests. See pages 18 and 19 forthe inside story on all the features that makeSeries 2A the high performance, long lastingchoice for all your heavy-duty air applications.
Cylinder
For Cylinder Division Plant Locations – See Page II.
17
A
(NFPA MT2)
Style DB
1"-6", Page 288"-14", Page 42
Series 2AHeavy Duty Air Cylinders
Tie Rods Extended Both Ends Head Rectangular Flange
Head Square Flange Cap Rectangular Flange Cap Square Flange Side Lug
(NFPA MF2)
Style H
1"-6", Page 20 (NFPA MF6)
Style HB
1"-6",Page 22
8"-14", Page 34 (NFPA MS2)(NFPA MF5)
Style JB
1"-6",Page 22
8"-14", Page 34
(NFPA MX3) (NFPA MX2)
Style TC
1"-6",Page 20
8"-14", Page 34 (NFPA MX1)
Style TD
1"-6",Page 20
8"-14", Page 34 (NFPA MF1)
Style J
1"-6", Page 20
Centerline Lugs Side Tapped Side End Angles Side End Lugs
(NFPA MS4)
Style F
1"-6", Page 248"-14", Page 38 (NFPA MS1)
Style CB
1"-6",Page 26
8"-14", Page 40 (NFPA MS7)
Style G
1"-6",Page 26
8"-14", Page 38(NFPA MS3)
Style E
11/2"-6",Page 24
8"-14", Page 36
Cap Fixed Clevis
(NFPA MP1)
Style BB
1"-6", Page 308"-14", Page 40
Available Mounting StylesTie Rods Extended Head End
Style TB
1"-6",Page 20
8"-14", Page 34
Tie Rods Extended Cap End
Standard Specifications• Heavy Duty Service – NFPA Specifications and
ANSI B93.15-1981 Mounting Dimension Standards• Standard Construction – Square Head – Tie Rod Design• Nominal Pressure – Up to 250 PSI Air Service• Standard Fluid – Filtered Air• Standard Temperature – -10½F. to +165½F.• Bore Sizes – 1" through 14" (Larger sizes available)
Double Rod Cylinders
Cap Detachable Clevis
(NFPA MP2)
Style BC
1"-6", Page 30
Head Trunnion
(NFPA MT1)
Style D
1"-6", Page 288"-14", Page 42
Style KTB Shown
Intermediate Fixed Trunnion
(NFPA MT4)
Style DD
11/2"-6",Page 28
8"-14", Page 42
Spherical Bearing
Style SB
11/2"-6",Page 44
8"-14", Page 45
Note: Series 2A Air Cylinders fully meet NFPA Standards and ANSI Standard B93.15-1981 for Mounting Dimensions for Square Head Industrial Fluid Power Cylinders.Parker Style TB, JB, HB, C, DB, and BB are available in 7" bore size, see page 32.
Specifications/Mountings
• Piston Rod Diameter – 1/2" through 51/2"• Mounting Styles – 17 standard styles at various application
ratings• Strokes – Available in any practical stroke length• Cushions – Optional at either end or both ends of stroke. "Float
Check" at cap end.• Rod Ends – Three Standard Choices – Specials to Order*See section C, “Operating Fluids and Temperature Range” for higher temperatureservice.
In line with our policy of continuing product improvement, specifications in this catalog aresubject to change.
Style C
1"-6",Page 24
8"-14", Page 36
Cap Trunnion
Most of the above illustratedmounting styles are available indouble rod cylinders.See Catalog Page 46.
For additional information – call your local Parker Cylinder Distributor.
18
The inside story on whyseries 2A is your best choice inheavy duty pneumatic cylinders
Primary Seal – Unique Serrated Lipseal® is aproven leakproof design, (Parker Patent #2997318)– completely self-compensating and self-relievingto withstand variations and conform to mechanicaldeflection that may occur.
Adjustable floating cushionsCushions are optional, and can be supplied at head end,cap end, or both ends without change in envelope ormounting dimensions. All Parker cushions are adjustable.The Series 2A cylinder design incorporates the longestcushion sleeve and cushion spear that can be provided inthe standard envelope without decreasing the rod bearingand piston bearing lengths.
(1) When a cushion is specified at the head end:a. A self-centering sleeve is furnished on the piston
rod assembly.b. A needle valve is provided that is flush with the
side of the head when wide open. It may beidentified by the fact that it is socket-keyed. It islocated on side number 2, in all mounting stylesexcept D, DB, DD, and E. In these styles it islocated on side number 3.
c. A springless check valve is provided that is alsoflush with the side of the head and is mounted
adjacent to the needle valve except on certain boresof mounting style C where it is mounted opposite theneedle valve. It may be identified by the fact that it isslotted.
d. The check and needle valves are interchangeablein the head.
(2) When a cushion is specified at the cap end:a. A cushion spear is provided on the piston
rod assembly.b. A “float check” self-centering bushing is provided
which incorporates a large flow check valve for fast“out-stroke” action.
c. A socket-keyed needle valve is provided that isflush with the side of the cap when wide open. It islocated on side number 2 in all mounting stylesexcept D, DB, DD, and E. In these styles it islocated on side number 3.
Piston Rod Stud –Furnished on 2" diameterrods and smaller whenstandard style #4 rod endthreads are required oron 13/8" diameter rodsand smaller when style#8 threads are required.Also available in 2 timesthe catalog “A” dimensionlength. Studs have rolledthreads and are madefrom high strength steel.Anaerobic adhesive isused to permanently lockthe stud to the piston rod.
Steel Head – Bored and groovedto provide concentricity for matingparts.
Ports – NPTF portsare standard.
End Seals – Pressure-actuatedcylinder body-to-head and cap “O”rings.
“Jewel” Rod GlandAssembly –Externally removablewithout cylinderdisassembly. Longbearing surface isinboard of the seals,assuring positivelubrication from withinthe cylinder. An “O”ring is used as a sealbetween gland andhead, and also servesas a prevailing torque-type lock.
High Strength TieRods – Made from100,000 psi minimumyield steel with rolledthreads for addedstrength.
The Cylinder Body –Hard chrome-platedbore, steel tubinghoned to a 15 microinch finish on 11/2"through 14" boresizes. 1" bore size isaluminum with hard-coated bore.
Adjustable Floating Cushions – Cushions areoptional and can be supplied at head end, capend, or both ends without change in envelope ormounting dimensions.
Secondary Seal –Double-Service Wiperseal® (ParkerPatent #2907596) – acts as asecondary pressure seal on theextend stroke and cleans the rod onthe return stroke.
Cylinder
For Cylinder Division Plant Locations – See Page II.
19
A
CylinderBore
(Inches)
11/2
2
21/2
31/4
4
5
RodNumber
1
2
1
2
1
2
1
21
2
1
2
RodDiameter*(Inches)
5/81
5/8
13/85/8
13/4
1
21
21/21
31/2
Piston Rod – Medium carbon steel, induction case-hardened to 54 Rc,hard chrome-plated and polished to 10 RMS finish. Piston rods are madefrom 90,000 to 100,000 psi minimum yield material in 1/2" through 4"diameters. Larger diameters vary between 57,000 and 90,000 psiminimum material, depending on rod diameter. The piston thread equalsthe catalog style #4 rod end thread for each rod diameter to assure properpiston-to-rod thread strength. Two wrench flats are provided for rod endattachment.
Cushion Length
CylinderBore
(Inches)
6
7
8
10
12
14
Cap13/16
13/16
13/16
13/16
13/16
13/16
1
11
1
1
1
Head*7/87/87/87/87/87/8
11/813/16
11/813/16
11/813/16
Cushion Length(Inches)
Cushion Length(Inches)
Cap11/411/411/411/411/4
11/4
13/413/413/4
13/42
2
Head*13/811/16
11/16
11/16
11/16
15/16
15/16
13/16
15/16
13/16
13/4
111/16
RodNumber
1
2
1
4
1
2
1
01
9
1
8
RodDiameter*(Inches)
13/84
13/8
2
13/8
51/2
13/451/22
51/221/2
51/2
*Head end cushions for rod diameters not listed have cushion lengths with the limits shown.For cushion selection and sizing see Section C.
Alloy Steel Tie Rod Nuts
Ports – NPTF portsare standard.
Steel Cap – Bored and groovedto provide concentricity for matingparts.
Align-A-Groove –(Patent #3043639) – A 3/16" widesurface machined at each end ofthe cylinder body. Makes precisemounting quick and easy.
One-Piece Fine Grained CastIron Piston – The wide pistonsurface contacting cylinder borereduces bearing loads, and a longthread engagement with rodprovides greater shock absorp-tion. Anaerobic adhesive is usedto permanently lock and seal thepiston to the rod.
Piston Lipseal – Fully dynamicand self-compensating forvariations in pressure, mechanicaldeflections and wear.
The exclusive“Jewel” glandgives you longercylinder life, betterperformance andlower costs.An extra-long inboard bearing surface insures lubricationfrom within the cylinder. Outboard of the bearing surface aretwo leakproof seals – The Lipseal and Wiperseal. Theserrated Lipseal (primary seal) is completely self-compen-sating and self-relieving. It adjusts to mechanical deflectionsor any pressure variation from near-zero to rated operatingpressure. The result is positive, no-leak sealing – regardlessof conditions.The Wiperseal does double duty. On the advance stroke, itacts as a secondary pressure seal. On the return, it wipesaway any dirt on the rod. This means less wear on bearingsurfaces and internal parts. Longer life for working parts.And, less loss of fluid. Plus, you can replace a “Jewel” glandwithout removing the tie rods or the retainer. Just a fewtwists with a spanner wrench does the job.
Prelubricated Wearing SurfacesParker Series 2A Air Cylinders are factory prelubricated.Lube-A-Cyl applied to seals, piston, cylinder bore, piston rodand gland surfaces provides lubrication for normal opera-tion. Lube-A-Cyl has been field and laboratory tested, and isrecommended by Parker for air cylinders where lubricantshould remain in the cylinder and not be expelled into theatmosphere.
Piston with Retainer Nut –Optional at extra charge.
Rod End Dimensions — see table 2Thread Style 9(NFPA Style SF)Small Female
Thread Style 8(NFPA Style IM)Intermediate Male
Thread Style 4(NFPA Style SM)Small Male
A high strength rod end stud is supplied on thread style 4 through 2" diam-eter rods and on thread style 8 through 13/8" diameter rods. Larger sizes orspecial rod ends are cut threads. Style 4 rod ends are recommendedwhere the workpiece is secured against the rod shoulder. When the
workpiece is not shouldered, style 4 rod ends are recommended through 2"piston rod diameters and style 8 rod ends are recommended on largerdiameters. Use style 9 for applications where female rod end threads arerequired. If rod end is not specified, style 4 will be supplied.
“Special” ThreadStyle 3Special thread,extension, rod eye,blank, etc., arealso available.To order, specify“Style 3” and givedesired dimen-sions for CC orKK, A and LA. Ifotherwise special,furnish dimen-sioned sketch.
Series 2AHeavy Duty Air Cylinders
MM B
NA
VWA
LA
C
18
CC
D WRENCHFLATS
MM B
NA
VWA
LA
C
18
KK
D WRENCHFLATS
MM B
NA
V
A
WC
18
KK
D WRENCHFLATS
For additional information – call your local Parker Cylinder Distributor.
20
2 4R E
E FB4 HOLES
TF
3
UF
1
G
XF
FK
J
P + STROKELB + STROKE
ZF + STROKE
W
EE
Y
F
MM
24E R
E
TF
3
UF
1
FB4 HOLES
G
WF
F J
P + STROKELB + STROKE
ZB + STROKE
W
EE
Y
K
MM
24E R
R
3
E
AA
1
GBB F J
P + STROKELB + STROKE
ZB + STROKE
W
EE
Y
K
MM
DD
Tie Rod andRectangular Flange Mountings1" to 6" Bore Sizes
Tie Rods ExtendedStyle TB(NFPA Style MX3)
Head Rectangular FlangeStyle J(NFPA Style MF1)
Cap Rectangular FlangeStyle H(NFPA Style MF2)
Style TB (NFPA MX3). Head Tie Rods Extended, illustrated: Style TC (NFPA MX2), Cap Tie Rods Extended; and StyleTD (NFPA MX1), Both Ends Tie Rods Extended are also available. All “T” styles can be dimensioned from Style TBdrawing at right.
Basic Mounting (T) —NFPA MX0 — no tie rods extended can be supplied uponrequest.
Series 2AHeavy Duty Air CylindersTable 1—Envelope and Mounting Dimensions
Table 2—Rod Dimensions
Note: Shaded areas indicate non-standard rod sizes that are available and made to order.
Table 3 — Envelope andMounting Dimensions
* Cushions not available on 1" bore.** On 1", 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with No. 2 rods. Minimum of three full threads available.
For Cylinder Division Plant Locations – See Page II.
Cylinder21
A
1(Std.)2
1(Std.)2
1(Std.)23
1(Std.)234
1(Std.)234
1(Std.)2345
1(Std.)234567
1(Std.)234567
37/844
41/8
47/847/851/853/4
47/8
47/8
553/8
555/8
53/8
51/8
651/2
53/4
61/4
67/8
61/2
63/4
61/4
71/8
61/2
63/4
67/8
61/2
73/8
63/4
771/8
73/8
73/8
73/8
875/8
73/4
888
Rod Style Style +.000Rod Dia. 8 4 & 9 -.002
Bore No. MM CC KK A B C D LA NA V W WF Y XF ZB ZF.999
1.1241.1241.4991.1241.9991.4991.1242.3741.4991.9991.4992.6241.9992.3741.4993.1241.9992.3742.6241.4994.2491.9992.3742.6243.1243.7491.9994.7492.3742.6243.1243.7494.249
5/83/43/4
11/83/4
15/8
11/83/4
211/8
15/8
11/8
21/4
15/8
211/8
315/8
221/4
11/8
31/2
15/8
221/4
331/2
15/8
42
21/4
331/2
31/2
3/83/83/81/23/85/81/23/83/41/25/81/27/85/83/41/2
15/83/47/81/2
15/83/47/8
11
5/8
13/47/8
111
3/81/21/27/81/2
11/87/81/2
11/27/8
11/87/8
111/16
11/8
11/27/8
21/16
11/8
11/2
111/16
7/8
311/8
11/2
111/16
21/16
25/8
11/8
33/8
11/2
111/16
21/16
25/8
3
5/16-247/16-207/16-203/4-16
7/16-201-143/4-16
7/16-2011/4-123/4-161-143/4-16
11/2-121-14
11/4-123/4-16
17/8-121-14
11/4-1211/2-123/4-16
21/2-121-14
11/4-1211/2-1217/8-1221/4-121-143-12
11/4-1211/2-1217/8-1221/4-1221/2-12
11/4
13/8
13/8
21/8
13/8
27/8
21/8
13/8
31/2
21/8
27/8
17/8
35/8
25/8
31/4
17/8
45/8
25/8
31/4
35/8
17/8
51/8
25/8
31/4
35/8
45/8
51/8
21/2
51/2
31/8
31/2
41/2
55
7/16
9/16
9/16
15/16
9/16
15/16
15/16
9/16
111/16
15/16
15/16
15/16
115/16
15/16
111/16
15/16
23/8
15/16
111/16
115/16
15/16
33/8
15/16
111/16
115/16
23/8
27/8
15/16
37/8
111/16
115/16
23/8
27/8
33/8
1/41/41/41/21/45/81/21/43/41/25/81/41/23/81/21/45/83/81/21/21/45/83/81/21/25/85/81/41/23/83/81/21/21/2
5/85/85/8
15/8
11/4
15/8
11/2
111/43/4
13/8
111/43/4
15/8
111/4
13/83/4
15/8
111/4
13/8
15/8
15/87/8
11/2
11/8
11/4
11/2
11/2
11/2
111
13/8
115/8
13/8
117/8
13/8
15/8
13/8
215/8
17/8
13/8
21/4
15/8
17/8
213/8
21/4
15/8
17/8
221/4
21/4
15/8
21/4
17/8
221/4
21/4
21/4
115/16
115/16
115/16
25/16
115/16
29/16
25/16
115/16
213/16
25/16
29/16
27/16
31/16
211/16
215/16
27/16
35/16
211/16
215/16
31/16
27/16
35/16
211/16
215/16
31/16
35/16
35/16
213/16
37/16
31/16
33/16
37/16
37/16
37/16
7/16-201/2-201/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-1413/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-1213/4-127/8-1431/4-1211/4-1211/2-1213/4-1221/4-1223/4-1211/4-1233/4-1211/2-1213/4-1221/4-1223/4-1231/4-12
Thread
1
11/2
2
21/2
31/4
4
5
6
1/25/85/8
15/8
13/8
15/8
13/4
113/8
12
13/8
13/4
121/2
13/8
13/4
21
31/2
13/8
13/4
221/2
313/8
413/4
221/2
331/2
Rod Extensions and Pilot Dimensions
41/2
41/2
45/8
545/8
51/4
543/4
55/8
51/8
53/8
55/8
61/4
57/8
61/8
55/8
61/2
57/8
61/8
61/4
57/8
63/4
61/8
63/8
61/2
63/4
63/4
65/8
71/4
67/8
771/4
71/4
71/4
411/16
411/16
47/8
51/4
415/16
59/16
55/16
51/16
515/16
57/16
511/16
665/8
61/4
61/2
667/8
61/4
61/2
65/8
65/16
73/16
69/16
613/16
615/16
73/16
73/16
71/16
711/16
75/16
77/16
711/16
711/16
711/16
Tie Rod andRectangular Flange Mountings1" to 6" Bore Sizes
Add Stroke
EEBore AA BB DD E NPTF F FB G J K R TF UF LB P
1*11/22
21/2
31/4
456
■
221/2
333/4
41/2
51/2
61/2
1/43/8**3/8**3/8**
1/21/21/23/4
3/83/83/83/85/85/85/83/4
1.532.022.63.13.94.75.86.9
3/4
111/811/813/813/8
113/16
113/16
10-241/4-28
5/16-245/16-243/8-243/8-241/2-201/2-20
1.081.431.842.192.763.324.104.88
1111
11/4
11/4
11/4
11/2
3/16
1/45/16
5/16
3/83/87/16
7/16
11/211/211/211/213/4
13/4
13/4
2
223/4
33/8
37/8411/16
57/16
65/8
75/8
21/2
33/8
41/8
45/851/261/4
75/8
85/8
Add Stroke
21/8
21/4
21/4
23/825/825/827/831/8
1/45/16
3/83/87/16
7/16
9/16
9/16
■ 1" bore head dimension is 13/4" x 11/2". (See illustration in “How to Order Series 2A Cylinders.”)
Rod End Dimensions — see table 2Thread Style 9(NFPA Style SF)Small Female
Thread Style 8(NFPA Style IM)Intermediate Male
Thread Style 4(NFPA Style SM)Small Male
A high strength rod end stud is supplied on thread style 4 through 2" diam-eter rods and on thread style 8 through 13/8" diameter rods. Larger sizes orspecial rod ends are cut threads. Style 4 rod ends are recommendedwhere the workpiece is secured against the rod shoulder. When the
workpiece is not shouldered, style 4 rod ends are recommended through 2"piston rod diameters and style 8 rod ends are recommended on largerdiameters. Use style 9 for applications where female rod end threads arerequired. If rod end is not specified, style 4 will be supplied.
“Special” ThreadStyle 3Special thread,extension, rod eye,blank, etc., arealso available.To order, specify“Style 3” and givedesired dimen-sions for CC orKK, A and LA. Ifotherwise special,furnish dimen-sioned sketch.
Series 2AHeavy Duty Air Cylinders
MM B
NA
VWA
LA
C
18
CC
D WRENCHFLATS
MM B
NA
VWA
LA
C
18
KK
D WRENCHFLATS
MM B
NA
V
A
WC
18
KK
D WRENCHFLATS
For additional information – call your local Parker Cylinder Distributor.
22
Head Square FlangeStyle JB(NFPA Style MF5)
Cap Square FlangeStyle HB(NFPA Style MF6)
Square Flange Mountings1" to 6" Bore Sizes
2 4R TF E
R
TF
3
UF
UFE1
FB8 HOLES
G
XF
F
K
J
P + STROKELB + STROKE
ZF + STROKE
W
EE
Y
F
MM
24E UF R
R
TF
3
TF
UFE1
FB8 HOLES
G
WF
F J
P + STROKELB + STROKE
ZB + STROKE
W
EE
Y
K
MM
Series 2AHeavy Duty Air CylindersTable 1—Envelope and Mounting Dimensions
Table 2—Rod Dimensions
Note: Shaded areas indicate non-standard rod sizes that are available and made to order.
Table 3 — Envelope andMounting Dimensions
* Cushions not available on 1" bore.** On 1", 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with No. 2 rods. Minimum of three full threads available.
For Cylinder Division Plant Locations – See Page II.
Cylinder23
A
1(Std.)2
1(Std.)2
1(Std.)23
1(Std.)234
1(Std.)234
1(Std.)2345
1(Std.)234567
1(Std.)234567
Square Flange Mountings1" to 6" Bore Sizes
Rod Style Style +.000Rod Dia. 8 4 & 9 -.002
Bore No. MM CC KK A B C D LA NA V W WF Y XF ZB ZF.999
1.1241.1241.4991.1241.9991.4991.1242.3741.4991.9991.4992.6241.9992.3741.4993.1241.9992.3742.6241.4994.2491.9992.3742.6243.1243.7491.9994.7492.3742.6243.1243.7494.249
5/83/43/4
11/83/4
15/8
11/83/4
211/8
15/8
11/8
21/4
15/8
211/8
315/8
221/4
11/8
31/2
15/8
221/4
331/2
15/8
42
21/4
331/2
31/2
3/83/83/81/23/85/81/23/83/41/25/81/27/85/83/41/2
15/83/47/81/2
15/83/47/8
11
5/8
13/47/8
111
3/81/21/27/81/2
11/87/81/2
11/27/8
11/87/8
111/16
11/8
11/27/8
21/16
11/8
11/2
111/16
7/8
311/8
11/2
111/16
21/16
25/8
11/8
33/8
11/2
111/16
21/16
25/8
3
5/16-247/16-207/16-203/4-16
7/16-201-143/4-16
7/16-2011/4-123/4-161-143/4-16
11/2-121-14
11/4-123/4-16
17/8-121-14
11/4-1211/2-123/4-16
21/2-121-14
11/4-1211/2-1217/8-1221/4-121-143-12
11/4-1211/2-1217/8-1221/4-1221/2-12
11/4
13/8
13/8
21/8
13/8
27/8
21/8
13/8
31/2
21/8
27/8
17/8
35/8
25/8
31/4
17/8
45/8
25/8
31/4
35/8
17/8
51/8
25/8
31/4
35/8
45/8
51/8
21/2
51/2
31/8
31/2
41/2
55
7/16
9/16
9/16
15/16
9/16
15/16
15/16
9/16
111/16
15/16
15/16
15/16
115/16
15/16
111/16
15/16
23/8
15/16
111/16
115/16
15/16
33/8
15/16
111/16
115/16
23/8
27/8
15/16
37/8
111/16
115/16
23/8
27/8
33/8
1/41/41/41/21/45/81/21/43/41/25/81/41/23/81/21/45/83/81/21/21/45/83/81/21/25/85/81/41/23/83/81/21/21/2
5/85/85/8
15/8
11/4
15/8
11/2
111/43/4
13/8
111/43/4
15/8
111/4
13/83/4
15/8
111/4
13/8
15/8
15/87/8
11/2
11/8
11/4
11/2
11/2
11/2
111
13/8
115/8
13/8
117/8
13/8
15/8
13/8
215/8
17/8
13/8
21/4
15/8
17/8
213/8
21/4
15/8
17/8
221/4
21/4
15/8
21/4
17/8
221/4
21/4
21/4
115/16
115/16
115/16
25/16
115/16
29/16
25/16
115/16
213/16
25/16
29/16
27/16
31/16
211/16
215/16
27/16
35/16
211/16
215/16
31/16
27/16
35/16
211/16
215/16
31/16
35/16
35/16
213/16
37/16
31/16
33/16
37/16
37/16
37/16
7/16-201/2-201/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-1413/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-1213/4-127/8-1431/4-1211/4-1211/2-1213/4-1221/4-1223/4-1211/4-1233/4-1211/2-1213/4-1221/4-1223/4-1231/4-12
Thread
1
11/2
2
21/2
31/4
4
5
6
1/25/85/8
15/8
13/8
15/8
13/4
113/8
12
13/8
13/4
121/2
13/8
13/4
21
31/2
13/8
13/4
221/2
313/8
413/4
221/2
331/2
Rod Extensions and Pilot Dimensions
41/2
41/2
45/8
545/8
51/4
543/4
55/8
51/8
53/8
55/8
61/4
57/8
61/8
55/8
61/2
57/8
61/8
61/4
57/8
63/4
61/8
63/8
61/2
63/4
63/4
65/8
71/4
67/8
771/4
71/4
71/4
411/16
411/16
47/8
51/4
415/16
59/16
55/16
51/16
515/16
57/16
511/16
665/8
61/4
61/2
667/8
61/4
61/2
65/8
65/16
73/16
69/16
613/16
615/16
73/16
73/16
71/16
711/16
75/16
77/16
711/16
711/16
711/16
47/8
47/8
553/8
555/8
53/8
51/8
651/2
53/4
61/4
67/8
61/2
63/4
61/4
71/8
61/2
63/4
67/8
61/2
73/8
63/4
771/8
73/8
73/8
73/8
875/8
73/4
888
Add Stroke
1*11/22
21/2
31/4
456
■
221/2
333/4
41/2
51/2
61/2
1/43/8**3/8**3/8**
1/21/21/23/4
3/83/83/83/85/85/85/83/4
11/211/211/211/213/4
13/4
13/4
2
1111
11/4
11/4
11/4
11/2
3/16
1/45/16
5/16
3/83/87/16
7/16
1.081.431.842.192.763.324.104.88
37/844
41/8
47/847/851/853/4
21/8
21/4
21/4
23/825/825/827/831/8
Add Stroke
1/45/16
3/83/87/16
7/16
9/16
9/16
223/4
33/8
37/8411/16
57/16
65/8
75/8
21/2
33/8
41/8
45/851/261/4
75/8
85/8
EEBore E NPTF F FB G J K R TF UF LB P
■ 1" bore head dimension is 13/4" x 11/2". (See illustration in “How to Order Series 2A Cylinders.”)
Rod End Dimensions — see table 2Thread Style 9(NFPA Style SF)Small Female
Thread Style 8(NFPA Style IM)Intermediate Male
Thread Style 4(NFPA Style SM)Small Male
A high strength rod end stud is supplied on thread style 4 through 2" diam-eter rods and on thread style 8 through 13/8" diameter rods. Larger sizes orspecial rod ends are cut threads. Style 4 rod ends are recommendedwhere the workpiece is secured against the rod shoulder. When the
workpiece is not shouldered, style 4 rod ends are recommended through 2"piston rod diameters and style 8 rod ends are recommended on largerdiameters. Use style 9 for applications where female rod end threads arerequired. If rod end is not specified, style 4 will be supplied.
“Special” ThreadStyle 3Special thread,extension, rod eye,blank, etc., arealso available.To order, specify“Style 3” and givedesired dimen-sions for CC orKK, A and LA. Ifotherwise special,furnish dimen-sioned sketch.
Series 2AHeavy Duty Air Cylinders
MM B
NA
VWA
LA
C
18
CC
D WRENCHFLATS
MM B
NA
VWA
LA
C
18
KK
D WRENCHFLATS
MM B
NA
V
A
WC
18
KK
D WRENCHFLATS
For additional information – call your local Parker Cylinder Distributor.
24
24E
E –.0052 –.010
TN
3
E
1
G
XT SN + STROKE
F J
P + STROKELB + STROKE
ZB + STROKE
W
EE
Y
K
MM
NT THREAD, ND DEEP4 TAPPED MTG. HOLES
24E
ST
SWSB4 HOLES
SW
–.005–.010
SWSW
ETS
3
US
1
G
XS SS + STROKE
SU SU
F
SW SW
J
P + STROKELB + STROKE
ZB + STROKE
W
EE
Y
K
MM
E2
24E ST
SW
SB4 HOLES
SWSW
SW
ETS
3
US
1
G
XS SS + STROKE
SU SU
F
SW SW
J
P + STROKELB + STROKE
ZB + STROKE
W
EE
Y
K
MM
Side Lugs, Centerline Lugsand Side Tapped Mountings1" to 6" Bore Sizes
Side LugStyle C(NFPA Style MS2)
Centerline LugsStyle E(NFPA Style MS3)
Side TappedStyle F(NFPA Style MS4)
Series 2AHeavy Duty Air CylindersTable 1—Envelope and Mounting Dimensions
Table 2—Rod Dimensions
Note: Shaded areas indicate non-standard rod sizes that are available and made to order.
Table 3 — Envelope andMounting Dimensions
* Cushions not available on 1" bore.** On 1", 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with No. 2 rods. Minimum of three full threads available.
For Cylinder Division Plant Locations – See Page II.
Cylinder25
A
1(Std.)2
1(Std.)2
1(Std.)23
1(Std.)234
1(Std.)234
1(Std.)2345
1(Std.)234567
1(Std.)234567
• Upper surface spot-faced for socket head screws.† Mounting style E not available in 1" bore.
Side Lugs, Centerline Lugsand Side Tapped Mountings1" to 6" Bore Sizes
EEBore E NPTF F G J K NT SB• ST SU SW TN TS US LB P SN SS
1*11/22
21/2
31/4
456
Rod Style Style +.000Rod Dia. 8 4 & 9 -.002
Bore No. MM CC KK A B C D LA NA V W ND XS XT Y ZB.999
1.1241.1241.4991.1241.9991.4991.1242.3741.4991.9991.4992.6241.9992.3741.4993.1241.9992.3742.6241.4994.2491.9992.3742.6243.1243.7491.9994.7492.3742.6243.1243.7494.249
5/83/43/4
11/83/4
15/8
11/83/4
211/8
15/8
11/8
21/4
15/8
211/8
315/8
221/4
11/8
31/2
15/8
221/4
331/2
15/8
42
21/4
331/2
31/2
3/83/83/81/23/85/81/23/83/41/25/81/27/85/83/41/2
15/83/47/81/2
15/83/47/8
11
5/8
13/47/8
111
3/81/21/27/81/2
11/87/81/2
11/27/8
11/87/8
111/16
11/8
11/27/8
21/16
11/8
11/2
111/16
7/8
311/8
11/2
111/16
21/16
25/8
11/8
33/8
11/2
111/16
21/16
25/8
3
5/16-247/16-207/16-203/4-16
7/16-201-143/4-16
7/16-2011/4-123/4-161-143/4-16
11/2-121-14
11/4-123/4-16
17/8-121-14
11/4-1211/2-123/4-16
21/2-121-14
11/4-1211/2-1217/8-1221/4-121-143-12
11/4-1211/2-1217/8-1221/4-1221/2-12
11/4
13/8
13/8
21/8
13/8
27/8
21/8
13/8
31/2
21/8
27/8
17/8
35/8
25/8
31/4
17/8
45/8
25/8
31/4
35/8
17/8
51/8
25/8
31/4
35/8
45/8
51/8
21/2
51/2
31/8
31/2
41/2
55
7/16
9/16
9/16
15/16
9/16
15/16
15/16
9/16
111/16
15/16
15/16
15/16
115/16
15/16
111/16
15/16
23/8
15/16
111/16
115/16
15/16
33/8
15/16
111/16
115/16
23/8
27/8
15/16
37/8
111/16
115/16
23/8
27/8
33/8
1/41/41/41/21/45/81/21/43/41/25/81/41/23/81/21/45/83/81/21/21/45/83/81/21/25/85/81/41/23/83/81/21/21/2
5/85/85/8
15/8
11/4
15/8
11/2
111/43/4
13/8
111/43/4
15/8
111/4
13/83/4
15/8
111/4
13/8
15/8
15/87/8
11/2
11/8
11/4
11/2
11/2
11/2
1/41/4
5/16
5/16
11/32
11/32
11/32
7/16
7/16
7/16
7/16
1/21/21/21/25/85/85/85/85/83/43/43/43/43/43/43/47/87/87/87/87/87/87/8
7/16-201/2-201/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-1413/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-1213/4-127/8-1431/4-1211/4-1211/2-1213/4-1221/4-1223/4-1211/4-1233/4-1211/2-1213/4-1221/4-1223/4-1231/4-12
Thread
1
11/2
2
21/2
31/4
4
5
6
1/25/85/8
15/8
13/8
15/8
13/4
113/8
12
13/8
13/4
121/2
13/8
13/4
21
31/2
13/8
13/4
221/2
313/8
413/4
221/2
331/2
Rod Extensions and Pilot Dimensions AddStroke
411/16
411/16
47/8
51/4
415/16
59/16
55/16
51/16
515/16
57/16
511/16
665/8
61/4
61/2
667/8
61/4
61/2
65/8
65/16
73/16
69/16
613/16
615/16
73/16
73/16
71/16
711/16
75/16
77/16
711/16
711/16
711/16
15/16*15/16*13/8
13/4
13/8
213/4
13/8
21/4
13/4
217/8
21/2
21/8
23/8
17/8
23/4
21/8
23/8
21/2
21/16
215/16
25/16
29/16
211/16
215/16
215/16
25/16
215/16
29/16
211/16
215/16
215/16
215/16
115/16
115/16
115/16
25/16
115/16
29/16
25/16
115/16
213/16
25/16
29/16
27/16
31/16
211/16
215/16
27/16
35/16
211/16
215/16
31/16
27/16
35/16
211/16
215/16
31/16
35/16
35/16
213/16
37/16
31/16
33/16
37/16
37/16
37/16
115/16
115/16
115/16
25/16
115/16
29/16
25/16
115/16
213/16
25/16
29/16
27/16
31/16
211/16
215/16
27/16
35/16
211/16
215/16
31/16
27/16
35/16
211/16
215/16
31/16
35/16
35/16
213/16
37/16
31/16
33/16
37/16
37/16
37/16
■
221/2
333/4
41/2
51/2
61/2
1/43/8**3/8**3/8**
1/21/21/23/4
3/83/83/83/85/85/85/83/4
11/211/211/211/213/4
13/4
13/4
2
1111
11/4
11/4
11/4
11/2
3/16
1/45/16
5/16
3/83/87/16
7/16
37/844
41/8
47/847/851/853/4
21/8
21/4
21/4
23/825/825/827/831/8
Add Stroke
10-241/4-205/16-183/8-161/2-131/2-135/8-113/4-10
9/32†
7/16
7/16
7/16
9/16
9/16
13/16
13/16
5/16†
1/21/21/23/43/4
11
3/4†
15/16
15/16
15/16
11/4
11/4
19/16
19/16
5/16†
3/83/83/81/21/2
11/16
11/16
9/16
5/87/8
11/4
11/2
21/16
211/16
31/4
21/8†
23/4
31/4
33/4
43/4
51/2
67/8
77/8
23/4†
31/2
441/2
53/4
61/2
81/4
91/4
21/8
21/4
21/4
23/825/825/827/831/8
27/8†
27/827/83
31/4
31/4
31/8
35/8
* Mounting style E not available in 1" bore.
■ 1" bore head dimension is 13/4" x 11/2". (See illustration in “How to Order Series 2A Cylinders.”)
Rod End Dimensions — see table 2Thread Style 9(NFPA Style SF)Small Female
Thread Style 8(NFPA Style IM)Intermediate Male
Thread Style 4(NFPA Style SM)Small Male
A high strength rod end stud is supplied on thread style 4 through 2" diam-eter rods and on thread style 8 through 13/8" diameter rods. Larger sizes orspecial rod ends are cut threads. Style 4 rod ends are recommendedwhere the workpiece is secured against the rod shoulder. When the
workpiece is not shouldered, style 4 rod ends are recommended through 2"piston rod diameters and style 8 rod ends are recommended on largerdiameters. Use style 9 for applications where female rod end threads arerequired. If rod end is not specified, style 4 will be supplied.
“Special” ThreadStyle 3Special thread,extension, rod eye,blank, etc., arealso available.To order, specify“Style 3” and givedesired dimen-sions for CC orKK, A and LA. Ifotherwise special,furnish dimen-sioned sketch.
Series 2AHeavy Duty Air Cylinders
MM B
NA
VWA
LA
C
18
CC
D WRENCHFLATS
MM B
NA
VWA
LA
C
18
KK
D WRENCHFLATS
MM B
NA
V
A
WC
18
KK
D WRENCHFLATS
For additional information – call your local Parker Cylinder Distributor.
26
Side End Angles andSide End Lugs Mountings1" to 6" Bore Sizes
Side End AnglesStyle CB(NFPA Style MS1)
Side End LugsStyle G(NFPA Style MS7)
2
4
E
AH
AT
3
E
1
G
AT
SA + STROKEF
J
P + STROKELB + STROKE
XA + STROKEZA + STROKE
W
Y
ALK
AO
MM S
AB6 HOLES
ALAO
EE
4E
EB4 HOLES
RES ES
3
E
1
G
SE + STROKE
EO EL EL
F J
P + STROKELB + STROKE
XE + STROKE
ZE + STROKE
W
K EE
Y
EO
MM2
ET
—.005—.010
E2
164
Series 2AHeavy Duty Air CylindersTable 1—Envelope and Mounting Dimensions
Table 2—Rod Dimensions
Note: Shaded areas indicate non-standard rod sizes that are available and made to order.
Table 3 — Envelope andMounting Dimensions
* Cushions not available on 1" bore.** On 1", 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with No. 2 rods. Minimum of three full threads available.
For Cylinder Division Plant Locations – See Page II.
Cylinder27
A
1(Std.)2
1(Std.)2
1(Std.)23
1(Std.)234
1(Std.)234
1(Std.)2345
1(Std.)234567
1(Std.)234567
Side End Angles andSide End Lugs Mountings1" to 6" Bore Sizes
Add Stroke EE
Bore AB AH AL AO AT E EB NPTF EL EO ES ET F G J K R S LB P SA SE1*
11/22
21/2
31/4
456
3/8†‡
7/16
7/16
7/16
9/16
9/16
11/16
13/16
1†
13/16
17/16
15/8
115/16
21/4
23/4
31/4
13/16†
111
11/4
11/4
13/813/8
5/16†
3/83/83/81/21/25/85/8
1/8†
1/81/81/81/81/83/16
3/16
■
221/2
333/4
41/2
51/2
61/2
•5/16
3/83/87/16
7/16
9/16
9/16
1/43/8**3/8**3/8**
1/21/21/23/4
•3/4
15/16
11/16
7/8
111/16
1
•1/4
5/16
5/16
3/83/81/21/2
•9/16
5/813/16
111/413/813/4
•17/32
5/825/32
15/16
15/32
13/8119/32
3/83/83/83/85/85/85/83/4
11/211/211/211/213/4
13/4
13/4
2
1111
11/4
11/4
11/4
11/2
3/16
1/45/16
5/16
3/83/87/16
7/16
1.08•1.431.842.192.763.324.104.88
15/16†
11/4
13/4
21/4
23/4
31/2
41/4
51/4
37/844
41/8
47/847/851/853/4
21/8
21/4
21/4
23/825/825/827/831/8
51/2†
66
61/8
73/873/877/881/2
•51/257/861/4
65/867/871/4
73/4
Rod Style Style +.000Rod Dia. 8 4 & 9 -.002
Bore No. MM CC KK A B C D LA NA V W Y XA XE ZA ZE.999
1.1241.1241.4991.1241.9991.4991.1242.3741.4991.9991.4992.6241.9992.3741.4993.1241.9992.3742.6241.4994.2491.9992.3742.6243.1243.7491.9994.7492.3742.6243.1243.7494.249
5/83/43/4
11/83/4
15/8
11/83/4
211/8
15/8
11/8
21/4
15/8
211/8
315/8
221/4
11/8
31/2
15/8
221/4
331/2
15/8
42
21/4
331/2
31/2
3/83/83/81/23/85/81/23/83/41/25/81/27/85/83/41/2
15/83/47/81/2
15/83/47/8
11
5/8
13/47/8
111
3/81/21/27/81/2
11/87/81/2
11/27/8
11/87/8
111/16
11/8
11/27/8
21/16
11/8
11/2
111/16
7/8
311/8
11/2
111/16
21/16
25/8
11/8
33/8
11/2
111/16
21/16
25/8
3
5/16-247/16-207/16-203/4-16
7/16-201-143/4-16
7/16-2011/4-123/4-161-143/4-16
11/2-121-14
11/4-123/4-16
17/8-121-14
11/4-1211/2-123/4-16
21/2-121-14
11/4-1211/2-1217/8-1221/4-121-143-12
11/4-1211/2-1217/8-1221/4-1221/2-12
11/4
13/8
13/8
21/8
13/8
27/8
21/8
13/8
31/2
21/8
27/8
17/8
35/8
25/8
31/4
17/8
45/8
25/8
31/4
35/8
17/8
51/8
25/8
31/4
35/8
45/8
51/8
21/2
51/2
31/8
31/2
41/2
55
7/16
9/16
9/16
15/16
9/16
15/16
15/16
9/16
111/16
15/16
15/16
15/16
115/16
15/16
111/16
15/16
23/8
15/16
111/16
115/16
15/16
33/8
15/16
111/16
115/16
23/8
27/8
15/16
37/8
111/16
115/16
23/8
27/8
33/8
1/41/41/41/21/45/81/21/43/41/25/81/41/23/81/21/45/83/81/21/21/45/83/81/21/25/85/81/41/23/83/81/21/21/2
5/85/85/8
15/8
11/4
15/8
11/2
111/43/4
13/8
111/43/4
15/8
111/4
13/83/4
15/8
111/4
13/8
15/8
15/87/8
11/2
11/8
11/4
11/2
11/2
11/2
7/16-201/2-201/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-1413/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-1213/4-127/8-1431/4-1211/4-1211/2-1213/4-1221/4-1223/4-1211/4-1233/4-1211/2-1213/4-1221/4-1223/4-1231/4-12
Thread
1
11/2
2
21/2
31/4
4
5
6
1/25/85/8
15/8
13/8
15/8
13/4
113/8
12
13/8
13/4
121/2
13/8
13/4
21
31/2
13/8
13/4
221/2
313/8
413/4
221/2
331/2
Rod Extensions and Pilot Dimensions
••
55/8
657/8
61/2
61/4
61/8
761/2
63/4
67/8
71/2
71/8
73/8
777/8
71/4
71/2
75/8
77/16
85/16
711/16
715/16
81/16
85/16
85/16
81/8
83/4
83/8
81/2
83/4
83/4
83/4
••
53/8
53/4
59/16
63/16
515/16
513/16
611/16
63/16
67/16
61/2
71/8
63/4
765/8
71/2
67/8
71/8
71/4
615/16
713/16
73/16
77/16
79/16
713/16
713/16
75/8
81/4
77/8
881/4
81/4
81/4
115/16
115/16
115/16
25/16
115/16
29/16
25/16
115/16
213/16
25/16
29/16
27/16
31/16
211/16
215/16
27/16
35/16
211/16
215/16
31/16
27/16
35/16
211/16
215/16
31/16
35/16
35/16
213/16
37/16
31/16
33/16
37/16
37/16
37/16
55/16**
55/8
655/8
61/4
653/4
65/8
61/8
63/8
67/8
71/2
71/8
73/8
67/8
73/4
71/8
73/8
71/2
71/4
81/8
71/2
73/4
77/8
81/8
81/8
885/8
81/4
83/8
85/8
85/8
85/8
55/8**6
63/8
665/8
63/8
61/8
761/2
63/4
73/8
875/8
77/8
73/8
81/4
75/8
77/8
877/8
83/4
81/8
83/8
81/2
83/4
83/4
85/8
91/4
87/8
991/4
91/4
91/4
* Mounting style CB available in 1" bore for rod No. 1 only.• Mounting style G not available in 1" bore.Caution: When using mounting styles CB and G, check clearance between mounting members and rod attachment or accessory. If necessary,specify longer rod extension to avoid interference with mounting members.
† Mounting style CB available in 1" bore for rod No. 1 only.‡ Mounting style CB for 1" bore only is furnished with four mounting holes (two each end). Center holes omitted.
■ 1" bore head dimension is 13/4" x 11/2". (See illustration in“How to Order Series 2A Cylinders.”)• Mounting style G not available in 1" bore.
Add Stroke
Rod End Dimensions — see table 2Thread Style 9(NFPA Style SF)Small Female
Thread Style 8(NFPA Style IM)Intermediate Male
Thread Style 4(NFPA Style SM)Small Male
A high strength rod end stud is supplied on thread style 4 through 2" diam-eter rods and on thread style 8 through 13/8" diameter rods. Larger sizes orspecial rod ends are cut threads. Style 4 rod ends are recommendedwhere the workpiece is secured against the rod shoulder. When the
workpiece is not shouldered, style 4 rod ends are recommended through 2"piston rod diameters and style 8 rod ends are recommended on largerdiameters. Use style 9 for applications where female rod end threads arerequired. If rod end is not specified, style 4 will be supplied.
“Special” ThreadStyle 3Special thread,extension, rod eye,blank, etc., arealso available.To order, specify“Style 3” and givedesired dimen-sions for CC orKK, A and LA. Ifotherwise special,furnish dimen-sioned sketch.
Series 2AHeavy Duty Air Cylinders
MM B
NA
VWA
LA
C
18
CC
D WRENCHFLATS
MM B
NA
VWA
LA
C
18
KK
D WRENCHFLATS
MM B
NA
V
A
WC
18
KK
D WRENCHFLATS
For additional information – call your local Parker Cylinder Distributor.
28
Trunnion Mountings1" to 6" Bore Sizes
Head TrunnionStyle D(NFPA Style MT1)
Cap TrunnionStyle DB(NFPA Style MT2)
Intermediate Fixed TrunnionStyle DD(NFPA Style MT4)
2
R18
4E TD
ETL TL
3
UT
1
G
XG
F J
P + STROKELB + STROKE
ZB + STROKE
W
EE
Y
K
MM
2
R18
4E TD
ETL TL
3
UT
1
G
XJ + STROKE
F J
P + STROKELB + STROKE
ZB + STROKE
W
EE
Y
K
MM
2
R18
4E UV TD
E
TMTL TL
3
UM1
G
XI**
F J
P + STROKELB + STROKE
ZB + STROKE
WEE
Y
K
MM
BD
Series 2AHeavy Duty Air CylindersTable 1—Envelope and Mounting Dimensions
Table 2—Rod Dimensions
Note: Shaded areas indicate non-standard rod sizes that are available and made to order.
Table 3 — Envelope andMounting Dimensions
* Cushions not available on 1" bore.** On 1", 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with No. 2 rods. Minimum of three full threads available.
For Cylinder Division Plant Locations – See Page II.
Cylinder29
A
1(Std.)2
1(Std.)2
1(Std.)23
1(Std.)234
1(Std.)234
1(Std.)2345
1(Std.)234567
1(Std.)234567
Trunnion Mountings1" to 6" Bore Sizes
EE TDBore BD E NPTF F G J K -.001 TL TM UM UT UV LB P
1*11/22
21/2
31/4
456
Rod Style Style +.000Rod Dia. 8 4 & 9 -.002 Min.**
Bore No. MM CC KK A B C D LA NA V W XG XI Y XJ ZB.999
1.1241.1241.4991.1241.9991.4991.1242.3741.4991.9991.4992.6241.9992.3741.4993.1241.9992.3742.6241.4994.2491.9992.3742.6243.1243.7491.9994.7492.3742.6243.1243.7494.249
5/83/43/4
11/83/4
15/8
11/83/4
211/8
15/8
11/8
21/4
15/8
211/8
315/8
221/4
11/8
31/2
15/8
221/4
331/2
15/8
42
21/4
331/2
31/2
3/83/83/81/23/85/81/23/83/41/25/81/27/85/83/41/2
15/83/47/81/2
15/83/47/8
11
5/8
13/47/8
111
3/81/21/27/81/2
11/87/81/2
11/27/8
11/87/8
111/16
11/8
11/27/8
21/16
11/8
11/2
111/16
7/8
311/8
11/2
111/16
21/16
25/8
11/8
33/8
11/2
111/16
21/16
25/8
3
5/16-247/16-207/16-203/4-16
7/16-201-143/4-16
7/16-2011/4-123/4-161-143/4-16
11/2-121-14
11/4-123/4-16
17/8-121-14
11/4-1211/2-123/4-16
21/2-121-14
11/4-1211/2-1217/8-1221/4-121-143-12
11/4-1211/2-1217/8-1221/4-1221/2-12
11/4
13/8
13/8
21/8
13/8
27/8
21/8
13/8
31/2
21/8
27/8
17/8
35/8
25/8
31/4
17/8
45/8
25/8
31/4
35/8
17/8
51/8
25/8
31/4
35/8
45/8
51/8
21/2
51/2
31/8
31/2
41/2
55
7/16
9/16
9/16
15/16
9/16
15/16
15/16
9/16
111/16
15/16
15/16
15/16
115/16
15/16
111/16
15/16
23/8
15/16
111/16
115/16
15/16
33/8
15/16
111/16
115/16
23/8
27/815/16
37/8
111/16
115/16
23/8
27/8
33/8
1/41/41/41/21/45/81/21/43/41/25/81/41/23/81/21/45/83/81/21/21/45/83/81/21/25/85/81/41/23/83/81/21/21/2
5/85/85/8
15/8
11/4
15/8
11/2
111/43/4
13/8
111/43/4
15/8
111/4
13/83/4
15/8
111/4
13/8
15/8
15/87/8
11/2
11/8
11/4
11/2
11/2
11/2
7/16-201/2-201/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-1413/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-1213/4-127/8-1431/4-1211/4-1211/2-1213/4-1221/4-1223/4-1211/4-1233/4-1211/2-1213/4-1221/4-1223/4-1231/4-12
Thread
1
11/2
2
21/2
31/4
4
5
6
1/25/85/8
15/8
13/8
15/8
13/4
113/8
12
13/8
13/4
121/2
13/8
13/4
21
31/2
13/8
13/4
221/2
313/8
413/4
221/2
331/2
Rod Extensions and Pilot Dimensions Add Stroke
411/16
411/16
47/8
51/4
415/16
59/16
55/16
51/16
515/16
57/16
511/16
665/8
61/4
61/2
667/8
61/4
61/2
65/8
65/16
73/16
69/16
613/16
615/16
73/16
73/16
71/16
711/16
75/16
77/16
711/16
711/16
711/16
115/16
115/16
115/16
25/16
115/16
29/16
25/16
115/16
213/16
25/16
29/16
27/16
31/16
211/16
215/16
27/16
35/16
211/16
215/16
31/16
27/16
35/16
211/16
215/16
31/16
35/16
35/16
213/16
37/16
31/16
33/16
37/16
37/16
37/16
13/4
13/4
13/4
21/8
13/4
23/8
21/8
13/4
25/8
21/8
23/8
21/4
27/8
21/2
23/4
21/4
31/8
21/2
23/4
27/8
21/4
31/8
21/2
23/4
27/8
31/8
31/8
25/8
31/4
27/8
331/4
31/4
31/4
**
33/16
39/16
35/16
315/16
311/16
35/16
43/16
311/16
315/16
43/16
413/16
47/16
411/16
43/16
51/16
47/16
411/16
413/16
45/16
51/16
47/16
411/16
413/16
51/16
51/16
415/16
59/16
53/16
55/16
59/16
59/16
59/16
44
41/8
41/2
41/8
43/4
41/2
41/4
51/8
45/8
47/8
555/8
51/4
51/2
557/8
51/4
51/2
55/8
51/4
61/8
51/2
53/4
57/8
61/8
61/8
57/8
61/2
61/8
61/4
61/2
61/2
61/2
■
221/2
333/4
41/2
51/2
61/2
1/43/8**3/8**3/8**
1/21/21/23/4
3/83/83/83/85/85/85/83/4
11/211/211/211/213/4
13/4
13/4
2
1111
11/4
11/4
11/4
11/2
3/16
1/45/16
5/16
3/83/87/16
7/16
.750•1.0001.0001.0001.0001.0001.0001.375
3/4•111111
13/8
•21/2
331/241/2
51/4
61/4
75/8
•41/2
551/2
61/2
71/4
81/4
103/8
34
41/2
553/4
61/2
71/2
91/4
•21/2
331/2
41/4
567
•11/4
11/2
11/2
222
21/2
+.000
37/844
41/8
47/847/851/853/4
21/8
21/4
21/4
23/825/825/827/831/8
Add Stroke
•1/41/23/87/87/85/8
11/8
StyleDD
Min.Stroke
• Mounting style not available in 1" bore.■ 1" bore head dimension is 13/4" x 11/2". (See illustration in “How to Order Series 2A Cylinders.”)
* Mounting style DD not available in 1" bore.**Dimension XI to be specified by customer.
Rod End Dimensions — see table 2Thread Style 9(NFPA Style SF)Small Female
Thread Style 8(NFPA Style IM)Intermediate Male
Thread Style 4(NFPA Style SM)Small Male
A high strength rod end stud is supplied on thread style 4 through 2" diam-eter rods and on thread style 8 through 13/8" diameter rods. Larger sizes orspecial rod ends are cut threads. Style 4 rod ends are recommendedwhere the workpiece is secured against the rod shoulder. When the
workpiece is not shouldered, style 4 rod ends are recommended through 2"piston rod diameters and style 8 rod ends are recommended on largerdiameters. Use style 9 for applications where female rod end threads arerequired. If rod end is not specified, style 4 will be supplied.
“Special” ThreadStyle 3Special thread,extension, rod eye,blank, etc., arealso available.To order, specify“Style 3” and givedesired dimen-sions for CC orKK, A and LA. Ifotherwise special,furnish dimen-sioned sketch.
Series 2AHeavy Duty Air Cylinders
MM B
NA
VWA
LA
C
18
CC
D WRENCHFLATS
MM B
NA
VWA
LA
C
18
KK
D WRENCHFLATS
MM B
NA
V
A
WC
18
KK
D WRENCHFLATS
For additional information – call your local Parker Cylinder Distributor.
30
2 4
CB CWCW
3
E
1
G
XC + STROKE
FK
J
P + STROKELB + STROKE
ZC + STROKE
W
EE
Y
L M
CD
PIVOT PINHARD CHROME PLATED
LR
MR
MM E
2 4
CB CWCW
3
E
1
G
XD + STROKE
FK
J F
P + STROKELB + STROKE
ZD + STROKE
W
EE
Y
L M
CD
PIVOT PINHARD CHROME PLATED
LR
MR
MM E
Cap Fixed ClevisStyle BB(NFPA Style MP1)
Cap Detachable ClevisStyle BC(NFPA Style MP2)
Clevis Mountings1" to 6" Bore Sizes
The 1", 4", 5" and 6" bore sizes have tie rod nuts at both ends as shown. Tie rods thread into cap on all other bore sizes.
Series 2AHeavy Duty Air CylindersTable 1—Envelope and Mounting Dimensions
Table 2—Rod Dimensions
Note: Shaded areas indicate non-standard rod sizes that are available and made to order.
Table 3 — Envelope andMounting Dimensions
* Cushions not available on 1" bore.** On 1", 11/2", 2" and 21/2" bore sizes, the head-end (only) pipe thread is not full depth on cylinders with No. 2 rods. Minimum of three full threads available.
For Cylinder Division Plant Locations – See Page II.
Cylinder31
A
1(Std.)2
1(Std.)2
1(Std.)23
1(Std.)234
1(Std.)234
1(Std.)2345
1(Std.)234567
1(Std.)234567
CD• EEBore CB -.002 CW E NPTF F G J K L LR M MR LB P
† In 1" bore size model only, a single eye mounting, 7/16" thick, is used. Dimension CD (.441") is hole diameter – pin not supplied.• Dimension CD is pin diameter except in 1" bore.
1*11/22
21/2
31/4
456
†
3/43/43/4
11/4
11/4
11/4
11/2
37/844
41/8
47/847/851/853/4
21/8
21/4
21/4
23/825/825/827/831/8
Add Stroke
■
221/2
333/4
41/2
51/2
61/2
1/43/8**3/8**3/8**
1/21/21/23/4
3/83/83/83/85/85/85/83/4
11/211/211/211/213/4
13/4
13/4
2
1111
11/4
11/4
11/4
11/2
3/16
1/45/16
5/16
3/83/87/16
7/16
+.000
.441†
.501
.501
.501
.751
.751
.7511.001
†
1/21/21/25/85/85/83/4
1/2†
3/43/43/4
11/4
11/4
11/4
11/2
1/2†
3/43/43/4
111
11/4
7/16†
1/21/21/23/43/43/4
1
1/2†
5/85/85/8
15/16
15/16
15/16
13/16
■ 1" bore head dimension is 13/4" x 11/2". (See illustration in “How to Order Series 2A Cylinders.”)
Clevis Mountings1" to 6" Bore Sizes
Rod Style Style +.000Rod Dia. 8 4 & 9 -.002
Bore No. MM CC KK A B C D LA NA V W Y XC XD ZC ZD.999
1.1241.1241.4991.1241.9991.4991.1242.3741.4991.9991.4992.6241.9992.3741.4993.1241.9992.3742.6241.4994.2491.9992.3742.6243.1243.7491.9994.7492.3742.6243.1243.7494.249
5/83/43/4
11/83/4
15/8
11/83/4
211/8
15/8
11/8
21/4
15/8
211/8
315/8
221/4
11/8
31/2
15/8
221/4
331/2
15/8
42
21/4
331/2
31/2
3/83/83/81/23/85/81/23/83/41/25/81/27/85/83/41/2
15/83/47/81/2
15/83/47/8
11
5/8
13/47/8
111
3/81/21/27/81/2
11/87/81/2
11/27/8
11/87/8
111/16
11/8
11/27/8
21/16
11/8
11/2
111/16
7/8
311/8
11/2
111/16
21/16
25/8
11/8
33/8
11/2
111/16
21/16
25/8
3
5/16-247/16-207/16-203/4-16
7/16-201-143/4-16
7/16-2011/4-123/4-161-143/4-16
11/2-121-14
11/4-123/4-16
17/8-121-14
11/4-1211/2-123/4-16
21/2-121-14
11/4-1211/2-1217/8-1221/4-121-143-12
11/4-1211/2-1217/8-1221/4-1221/2-12
11/4
13/8
13/8
21/8
13/8
27/8
21/8
13/8
31/2
21/8
27/8
17/8
35/8
25/8
31/4
17/8
45/8
25/8
31/4
35/8
17/8
51/8
25/8
31/4
35/8
45/8
51/8
21/2
51/2
31/8
31/2
41/2
55
7/16
9/16
9/16
15/16
9/16
15/16
15/16
9/16
111/16
15/16
15/16
15/16
115/16
15/16
111/16
15/16
23/8
15/16
111/16
115/16
15/16
33/8
15/16
111/16
115/16
23/8
27/8
15/16
37/8
111/16
115/16
23/8
27/8
33/8
1/41/41/41/21/45/81/21/43/41/25/81/41/23/81/21/45/83/81/21/21/45/83/81/21/25/85/81/41/23/83/81/21/21/2
5/85/85/8
15/8
11/4
15/8
11/2
111/43/4
13/8
111/43/4
15/8
111/4
13/83/4
15/8
111/4
13/8
15/8
15/87/8
11/2
11/8
11/4
11/2
11/2
11/2
7/16-201/2-201/2-207/8-141/2-2011/4-127/8-141/2-2011/2-127/8-1411/4-127/8-1413/4-1211/4-1211/2-127/8-1421/4-1211/4-1211/2-1213/4-127/8-1431/4-1211/4-1211/2-1213/4-1221/4-1223/4-1211/4-1233/4-1211/2-1213/4-1221/4-1223/4-1231/4-12
Thread
1
11/2
2
21/2
31/4
4
5
6
1/25/85/8
15/8
13/8
15/8
13/4
113/8
12
13/8
13/4
121/2
13/8
13/4
21
31/2
13/8
13/4
221/2
313/8
413/4
221/2
331/2
Rod Extensions and Pilot Dimensions Add Stroke
55
53/8
53/4
53/8
653/4
51/2
63/8
57/8
61/8
67/8
71/2
71/8
73/8
67/8
73/4
71/8
73/8
71/2
71/8
873/8
75/8
73/4
88
81/8
83/4
83/8
81/2
83/4
83/4
83/4
57/16
57/16
57/8
61/4
57/8
61/2
61/4
667/8
63/8
65/8
75/8
81/4
77/8
81/8
75/8
81/2
77/8
81/8
81/4
77/8
83/4
81/8
83/8
81/2
83/4
83/4
91/8
93/4
93/8
91/2
93/4
93/4
93/4
115/16
115/16
115/16
25/16
115/16
29/16
25/16
115/16
213/16
25/16
29/16
27/16
31/16
211/16
215/16
27/16
35/16
211/16
215/16
31/16
27/16
35/16
211/16
215/16
31/16
35/16
35/16
213/16
37/16
31/16
33/16
37/16
37/16
37/16
53/8
53/8
53/4
61/8
53/4
63/8
61/8
57/8
63/4
61/4
61/2
71/2
81/8
73/4
871/2
83/8
73/4
881/8
73/4
85/8
881/4
83/8
85/8
85/8
87/8
91/2
91/8
91/4
91/2
91/2
91/2
513/16
513/16
61/4
65/8
61/4
67/8
65/8
63/8
71/4
63/4
781/4
87/8
81/2
83/4
81/4
91/8
81/2
83/4
87/8
81/2
93/8
83/4
991/8
93/8
93/8
97/8
101/2
101/8
101/4
101/2
101/2
101/2
For additional information – call your local Parker Cylinder Distributor.
32
24E R
R
AA
TTSQ.
3
E1
GWF
BB
F J
P + STROKELB + STROKE
ZB + STROKE
WEE
Y
K
MM
DD
24E TE
TETTSQ.
3
E1
GWF
F J
P + STROKELB + STROKE
ZB + STROKE
WEE
Y
K
MM
EB4 HOLES
2 4TE E
TE EB4 HOLES
3
E1
GXK + STROKE
FK
J
P + STROKELB + STROKE
ZJ + STROKE
WEE
Y
MM
Tie Rod, Head Square andCap Square Mountings7" Bore Size
Tie Rods ExtendedStyle TB(NFPA Style MX3)
Head Square FlangeStyle JB(NFPA Style ME3)
Cap Square FlangeStyle HB(NFPA Style ME4)
Rod End Dimensions — see table 2Thread Style 9(NFPA Style SF)Small Female
Thread Style 8(NFPA Style IM)Intermediate Male
Thread Style 4(NFPA Style SM)Small Male
A high strength rod end stud is supplied on thread style 4 through 2" diam-eter rods and on thread style 8 through 13/8" diameter rods. Larger sizes orspecial rod ends are cut threads. Style 4 rod ends are recommendedwhere the workpiece is secured against the rod shoulder. When the
workpiece is not shouldered, style 4 rod ends are recommended through 2"piston rod diameters and style 8 rod ends are recommended on largerdiameters. Use style 9 for applications where female rod end threads arerequired. If rod end is not specified, style 4 will be supplied.
“Special” ThreadStyle 3Special thread,extension, rod eye,blank, etc., arealso available.To order, specify“Style 3” and givedesired dimen-sions for CC orKK, A and LA. Ifotherwise special,furnish dimen-sional sketch.
Series 2AHeavy Duty Air Cylinders
MM B
NA
VWA
LA
C
18
CC
D WRENCHFLATS
MM B
NA
VWA
LA
C
18
KK
D WRENCHFLATS
MM B
NA
V
A
WC
18
KK
D WRENCHFLATS
Style TB (NFPA MX3) HeadTie Rods Extended,illustrated: Style TC (NFPAMX2), Cap Tie RodsExtended; and Style TD(NFPA MX1), Both Ends TieRods Extended are alsoavailable. All “T” styles canbe dimensioned from StyleTB drawing at right.
Cylinder
For Cylinder Division Plant Locations – See Page II.
33
A
134
4E
ST
SW
SW
SW
SWTS
ETTSQ.
3
US1
GSW SW
XS SS + STROKE
SU SUF
P + STROKELB + STROKE
ZB + STROKE
WEE
Y
K
MM
SB4 HOLES
J
2
E —.0052 —.010
24E TD
E TLTLTTSQ.
3
UT1
XJ + STROKEF
P + STROKELB + STROKE
ZB + STROKE
WEE
Y
K
MM
18 R
G J
4E
3
E
1
XT SN + STROKEF
P + STROKELB + STROKE
ZB + STROKE
WEE
Y
K
MM
TN
2
E —.0052 —.010
NT THREAD, ND DEEP4 TAPPED MTG. HOLES
TTSQ.
JG
24E TD
E TLTLTTSQ.
3
UT1
XGF J
P + STROKELB + STROKE
ZB + STROKE
WEE
Y
K
MM
18 R
G
Side Lug, Side Tapped,Cap Trunnion, Head Trunnion,Cap Fixed Clevis Mountings7" Bore Size
Series 2AHeavy Duty Air Cylinders
Rod Style Style +.000Rod Dia. 8 4 & 9 -.002
Bore No. MM CC KK A B C D LA NA V W WF Y TT XG XS XT XC XJ XK ZB ZC ZJ
Thread Add Stroke
13/8
13/4
2
11/4-1211/2-1213/4-12
1-1411/4-1211/2-12
15/8
221/4
1.9992.3742.624
5/83/47/8
11/8
11/2
111/16
21/2
31/8
31/2
15/16
111/16
115/16
1/43/83/8
7/8
11/8
11/4
15/8
17/8
2
213/16
31/16
33/16
444
25/8
27/8
3
25/16
29/16
211/16
213/16
31/16
33/16
Rod Extensions and Pilot Dimensions
781/4
81/2
85/8
661/4
63/8
51/4
51/2
55/8
75/16
79/16
711/16
91/4
91/2
95/8
63/4
771/8
Table 2—Rod Dimensions
+.000Bore AA BB CB CD CW DD E EB EE F G J K L LR M MR ND NT R SB ST SU SW TE TL TN TS US UT LB P SN SS
-.002 7 8.1 25/16 11/2 1.001 3/4
5/8-18 71/2 9/163/4
3/4 2 11/2 9/16 11/2 11/4 1 13/16 11/8 3/4-10 5.73 13/16 1 19/1611/16 1.375 63/413/8 31/2 87/8 101/4 101/4 57/8 31/4 31/4 33/4
Add Stroke
Table 1—Envelope and Mounting Dimensions
Table 3 — Envelope andMounting Dimensions
Side LugStyle C(NFPA Style MS2)
Cap TrunnionStyle DB(NFPA Style MT2)
Cap Fixed ClevisStyle BB(NFPA Style MP1)
Side TappedStyle F(NFPA Style MS4)
Head TrunnionStyle D(NFPA Style MT1)
E
3
E
1
XC + STROKEF
P + STROKELB + STROKE
ZC + STROKE
WEE
Y
K
MM
CB
2
CW CWJ L MG
4
PIVOT PIN
CD
LR
MR
Note: Other mounting styles and double rod end cylinders are available on request. Consult factory for details.
+.000TD
-.001
For additional information – call your local Parker Cylinder Distributor.
34
24E R
R
AA
TTSQ.
3
E1
GWF
BB
F J
P + STROKELB + STROKE
ZB + STROKE
WEE
Y
K
MM
DD
24E TE
TETTSQ.
3
E1
GWF
F J
P + STROKELB + STROKE
ZB + STROKE
WEE
Y
K
MM
EB4 HOLES
2 4TE E
TE EB4 HOLES
3
E1
GXK + STROKE
FK
J
P + STROKELB + STROKE
ZJ + STROKE
WEE
Y
MM
Tie Rod, Head Square andCap Square Mountings8" to 14" Bore Size
Tie Rods ExtendedStyle TB(NFPA Style MX3)
Head Square FlangeStyle JB(NFPA Style ME3)
Cap Square FlangeStyle HB(NFPA Style ME4)
Series 2AHeavy Duty Air Cylinders
Style TB (NFPA MX3)Head Tie Rods Extended,illustrated: Style TC (NFPAMX2), Cap Tie RodsExtended; and Style TD(NFPA MX1), Both EndsTie Rods Extended arealso available. All “T”styles can be dimensionedfrom Style TB drawing atright.
Rod End Dimensions — see table 2Thread Style 9(NFPA Style SF)Small Female
Thread Style 8(NFPA Style IM)Intermediate Male
Thread Style 4(NFPA Style SM)Small Male
A high strength rod end stud is supplied on thread style 4 through 2" diam-eter rods and on thread style 8 through 13/8" diameter rods. Larger sizes orspecial rod ends are cut threads. Style 4 rod ends are recommendedwhere the workpiece is secured against the rod shoulder. When the
workpiece is not shouldered, style 4 rod ends are recommended through 2"piston rod diameters and style 8 rod ends are recommended on largerdiameters. Use style 9 for applications where female rod end threads arerequired. If rod end is not specified, style 4 will be supplied.
“Special’ ThreadStyle 3Special thread,extension, rod eye,blank, etc., arealso available.To order, specify“Style 3” and givedesired dimen-sions for CC orKK, A and LA. Ifotherwise special,furnish dimen-sional sketch.
MM B
NA
VWA
LA
C
18
CC
D WRENCHFLATS
MM B
NA
VWA
LA
C
18
KK
D WRENCHFLATS
MM B
NA
V
A
WC
18
KK
D WRENCHFLATS
Mounting styles TB & TD not offeredin 8" bore, rod codes #2, 9 and 0.
Cylinder
For Cylinder Division Plant Locations – See Page II.
35
A
EEBore AA BB DD E EB NPTF F G J K R TE LB P
Rod Style Style +.000Rod Dia. 8 4 & 9 -.002
Bore No. MM CC KK A B C D LA NA V W TT WF Y XK ZB ZJ1.9996.2492.3742.6243.1243.7494.2494.7495.2495.7492.3742.6243.1243.7494.2494.7495.2495.7496.2492.6243.1243.7494.2494.7495.2495.7496.2493.1243.7494.2494.7495.2495.7496.249
15/8
51/2
221/4
331/2
31/2
441/2
52
21/4
331/2
31/2
441/2
551/2
21/4
331/2
31/2
441/2
551/2
331/2
31/2
441/2
551/2
5/8
13/47/8
111111
3/47/8
1111111
7/8
11111111111111
11/8
45/8
11/2
111/16
21/16
25/8
333/8
37/8
41/4
11/2
111/16
21/16
25/8
333/8
37/8
41/4
45/8
111/16
21/16
25/8
333/8
37/8
41/4
45/8
21/16
25/8
333/8
37/8
41/4
45/8
1-144-12
11/4-1211/2-1217/8-1221/4-1221/2-123-12
31/4-1231/2-1211/4-1211/2-1217/8-1221/4-1221/2-123-12
31/4-1231/2-124-12
11/2-1217/8-1221/4-1221/2-123-12
31/4-1231/2-124-12
17/8-1221/4-1221/2-123-12
31/4-1231/2-124-12
21/2
731/8
31/2
41/2
55
51/2
661/2
31/8
31/2
41/2
55
51/2
661/2
731/2
41/2
55
51/2
661/2
741/2
55
51/2
661/2
7
15/16
53/8
111/16
115/16
23/8
27/8
33/8
37/8
43/8
47/8
111/16
115/16
23/8
27/8
33/8
37/8
43/8
47/8
53/8
115/16
23/8
27/8
33/8
37/8
43/8
47/8
53/8
23/8
27/8
33/8
37/8
43/8
47/8
53/8
1/41/23/83/81/21/21/21/21/21/23/83/81/21/21/21/21/21/21/23/81/21/21/21/21/21/21/21/21/21/21/21/21/21/2
7/8
11/2
11/8
11/4
11/2
11/2
11/2
11/2
11/2
11/2
11/8
11/4
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/4
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
47444
51/2
51/2
51/2
77444
51/2
51/2
51/2
77744
51/2
51/2
51/2
7774
51/2
51/2
51/2
777
11/4-1251/4-1211/2-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1211/2-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-12
Thread
13/8
51/2
13/4
221/2
331/2
441/2
513/4
221/2
331/2
441/2
551/2
221/2
331/2
441/2
551/2
21/2
331/2
441/2
551/2
Rod Extensions and Pilot Dimensions
63/4
73/8
771/8
73/8
73/8
73/8
73/8
73/8
73/8
81/4
83/8
85/8
85/8
85/8
85/8
85/8
85/8
85/8
87/8
91/8
91/8
91/8
91/8
91/8
91/8
91/8
103/8
103/8
103/8
103/8
103/8
103/8
103/8
8
10
12
14
Tie Rod, Head Square andCap Square Mountings8" to 14" Bore Size
9.111.213.315.4
25/16
211/16
211/16
33/16
5/8-183/4-163/4-167/8-14
81/2105/8123/4
143/4
11/16
13/16
13/16
15/16
3/4
11
11/4
3/43/43/43/4
221/4
21/4
23/4
11/222
21/4
9/16
11/16
11/16
3/4
6.447.929.40
10.90
7.579.40
11.1012.87
57/871/875/887/8
31/4
41/845/851/2
8101214
51/4
57/8
51/2
55/8
57/8
57/8
57/8
57/8
57/8
57/8
61/4
63/8
65/8
65/8
65/8
65/8
65/8
65/8
65/8
67/8
71/8
71/8
71/8
71/8
71/8
71/8
71/8
81/8
81/8
81/8
81/8
81/8
81/8
81/8
75/16
715/16
79/16
711/16
715/16
715/16
715/16
715/16
715/16
715/16
815/16
91/16
95/16
95/16
95/16
95/16
95/16
95/16
95/16
99/16
913/16
913/16
913/16
913/16
913/16
913/16
913/16
111/8
111/8
111/8
111/8
111/8
111/8
111/8
Add Stroke
15/8
21/4
17/8
221/4
21/4
21/4
21/4
21/4
21/4
17/8
221/4
21/4
21/4
21/4
21/4
21/4
21/4
221/4
21/4
21/4
21/4
21/4
21/4
21/4
21/4
21/4
21/4
21/4
21/4
21/4
21/4
213/16
37/16
31/16
33/16
37/16
37/16
37/16
37/16
37/16
37/16
31/8
31/4
31/2
31/2
31/2
31/2
31/2
31/2
31/2
31/4
31/2
31/2
31/2
31/2
31/2
31/2
31/2
313/16
313/16
313/16
313/16
313/16
313/16
313/16
Series 2AHeavy Duty Air CylindersTable 1—Envelope and Mounting Dimensions
Table 2—Rod DimensionsTable 3 — Envelope andMounting Dimensions
1(Std.)234567890
1(Std.)34567890
1(Std.)3456789
1(Std.)345678
Add Stroke
For additional information – call your local Parker Cylinder Distributor.
36
4E
ST
SW
SW
SW
SWTS
ETTSQ.
3
US1
GSW SW
XS SS + STROKE
SU SUF
P + STROKELB + STROKE
ZB + STROKE
WEE
Y
K
MM
SB4 HOLES
J
2
E —.0052 —.010
24E
ST
SW
SW
SW
SWTS
ETTSQ.
3
US1
GSW SW
XS SS + STROKE
SU SUF
P + STROKELB + STROKE
ZB + STROKE
WEE
Y
K
MM
SB4 HOLES
J
Side LugStyle C(NFPA Style MS2)
Centerline LugsStyle E(NFPA Style MS3)
Side Lugs andCenterline Lugs Mountings8" to 14" Bore Size
Rod End Dimensions — see table 2Thread Style 9(NFPA Style SF)Small Female
Thread Style 8(NFPA Style IM)Intermediate Male
Thread Style 4(NFPA Style SM)Small Male
A high strength rod end stud is supplied on thread style 4 through 2" diam-eter rods and on thread style 8 through 13/8" diameter rods. Larger sizes orspecial rod ends are cut threads. Style 4 rod ends are recommendedwhere the workpiece is secured against the rod shoulder. When the
workpiece is not shouldered, style 4 rod ends are recommended through 2"piston rod diameters and style 8 rod ends are recommended on largerdiameters. Use style 9 for applications where female rod end threads arerequired. If rod end is not specified, style 4 will be supplied.
“Special” ThreadStyle 3Special thread,extension, rod eye,blank, etc., arealso available.To order, specify“Style 3” and givedesired dimen-sions for CC orKK, A and LA. Ifotherwise special,furnish dimen-sional sketch.
MM B
NA
VWA
LA
C
18
CC
D WRENCHFLATS
MM B
NA
VWA
LA
C
18
KK
D WRENCHFLATS
MM B
NA
V
A
WC
18
KK
D WRENCHFLATS
Series 2AHeavy Duty Air Cylinders
Cylinder
For Cylinder Division Plant Locations – See Page II.
37
A
1(Std.)234567890
1(Std.)34567890
1(Std.)3456789
1(Std.)345678
EEBore E NPTF F G J K SB* ST SU SW TS US LB P SS
Side Lugs andCenterline Lugs Mountings8" to 14" Bore Sizes
97/8123/8141/217
111/4141/8161/4191/4
57/871/875/887/8
31/4
41/845/851/2
8101214
Add Stroke
Rod Style Style +.000Rod Dia. 8 4 & 9 -.002
Bore No. MM CC KK A B C D LA NA V W TT XS Y ZB1.9996.2492.3742.6243.1243.7494.2494.7495.2495.7492.3742.6243.1243.7494.2494.7495.2495.7496.2492.6243.1243.7494.2494.7495.2495.7496.2493.1243.7494.2494.7495.2495.7496.249
15/8
51/2
221/4
331/2
31/2
441/2
52
21/4
331/2
31/2
441/2
551/2
21/4
331/2
31/2
441/2
551/2
331/2
31/2
441/2
551/2
5/8
13/47/8
111111
3/47/8
1111111
7/8
11111111111111
11/8
45/8
11/2
111/16
21/16
25/8
333/8
37/8
41/4
11/2
111/16
21/16
25/8
333/8
37/8
41/4
45/8
111/16
21/16
25/8
333/8
37/8
41/4
45/8
21/16
25/8
333/8
37/8
41/4
45/8
1-144-12
11/4-1211/2-1217/8-1221/4-1221/2-123-12
31/4-1231/2-1211/4-1211/2-1217/8-1221/4-1221/2-123-12
31/4-1231/2-124-12
11/2-1217/8-1221/4-1221/2-123-12
31/4-1231/2-124-12
17/8-1221/4-1221/2-123-12
31/4-1231/2-124-12
21/2
731/8
31/2
41/2
55
51/2
661/2
31/8
31/2
41/2
55
51/2
661/2
731/2
41/2
55
51/2
661/2
741/2
55
51/2
661/2
7
15/16
53/8
111/16
115/16
23/8
27/8
33/8
37/8
43/8
47/8
111/16
115/16
23/8
27/8
33/8
37/8
43/8
47/8
53/8
115/16
23/8
27/8
33/8
37/8
43/8
47/8
53/8
23/8
27/8
33/8
37/8
43/8
47/8
53/8
1/41/23/83/81/21/21/21/21/21/23/83/81/21/21/21/21/21/21/23/81/21/21/21/21/21/21/21/21/21/21/21/21/21/2
7/8
11/2
11/8
11/4
11/2
11/2
11/2
11/2
11/2
11/2
11/8
11/4
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/4
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
47444
51/2
51/2
51/2
77444
51/2
51/2
51/2
77744
51/2
51/2
51/2
7774
51/2
51/2
51/2
777
11/4-1251/4-1211/2-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1211/2-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-12
Thread
13/8
51/2
13/4
221/2
331/2
441/2
513/4
221/2
331/2
441/2
551/2
221/2
331/2
441/2
551/2
21/2
331/2
441/2
551/2
Rod Extensions and Pilot Dimensions AddStroke
8
10
12
14
Series 2AHeavy Duty Air CylindersTable 1—Envelope and Mounting Dimensions
Table 2—Rod DimensionsTable 3 — Envelope andMounting Dimensions
213/16
37/16
31/16
33/16
37/16
37/16
37/16
37/16
37/16
37/16
31/8
31/4
31/2
31/2
31/2
31/2
31/2
31/2
31/2
31/4
31/2
31/2
31/2
31/2
31/2
31/2
31/2
313/16
313/16
313/16
313/16
313/16
313/16
313/16
75/16
715/16
79/16
711/16
715/16
715/16
715/16
715/16
715/16
715/16
815/16
91/16
95/16
95/16
95/16
95/16
95/16
95/16
95/16
99/16
913/16
913/16
913/16
913/16
913/16
913/16
913/16
111/8
111/8
111/8
111/8
111/8
111/8
111/8
25/16
215/16
29/16
211/16
215/16
215/16
215/16
215/16
215/16
215/16
23/4
27/8
31/8
31/8
31/8
31/8
31/8
31/8
31/8
27/8
31/8
31/8
31/8
31/8
31/8
31/8
31/8
33/8
33/8
33/8
33/8
33/8
33/8
33/8
81/2105/8123/4
143/4
3/4
11
11/4
3/43/43/43/4
221/4
21/4
23/4
11/222
21/4
9/16
11/16
11/16
3/4
13/16
11/16
11/16
15/16
111/4
11/4
11/2
19/16
22
21/2
11/16
7/87/8
11/8
33/4
45/851/857/8
* Upper surface spotfaced for socket head screws.
For additional information – call your local Parker Cylinder Distributor.
38
4E
3
E
1
XT SN + STROKEF
P + STROKELB + STROKE
ZB + STROKE
WEE
Y
K
MM
TN
2
E —.0052 —.010
NT THREAD, ND DEEP4 TAPPED MTG. HOLES
TTSQ.
JG
Side TappedStyle F(NFPA Style MS4)
Side End LugsStyle G(NFPA Style MS7)
Side Tapped andSide End Lugs Mountings8" to 14" Bore Size
Not offered in the following sizes: 8" bore, rod codes #2, 6, 7, 8, 9 and 0; 10" bore,rod codes #8, 9 and 0; and 12" bore, rod codes #7, 8 and 9.
Cylinders with this mounting style are mounted on the precision ground surfaces of the head and cap. Theremust be a minimum gap of at least 1/64 of an inch between the bottom of the lug and the mounting surface beforethe mounting bolts are tightened.
Rod End Dimensions — see table 2Thread Style 9(NFPA Style SF)Small Female
Thread Style 8(NFPA Style IM)Intermediate Male
Thread Style 4(NFPA Style SM)Small Male
A high strength rod end stud is supplied on thread style 4 through 2" diam-eter rods and on thread style 8 through 13/8" diameter rods. Larger sizes orspecial rod ends are cut threads. Style 4 rod ends are recommendedwhere the workpiece is secured against the rod shoulder. When the
workpiece is not shouldered, style 4 rod ends are recommended through 2"piston rod diameters and style 8 rod ends are recommended on largerdiameters. Use style 9 for applications where female rod end threads arerequired. If rod end is not specified, style 4 will be supplied.
Special ThreadStyle 3Special thread,extension, rod eye,blank, etc., arealso available.To order, specify“Style 3” and givedesired dimen-sions for CC orKK, A and LA. Ifotherwise special,furnish dimen-sional sketch.
MM B
NA
VWA
LA
C
18
CC
D WRENCHFLATS
MM B
NA
VWA
LA
C
18
KK
D WRENCHFLATS
MM B
NA
V
A
WC
18
KK
D WRENCHFLATS
24E
ET
164
E2
R EB4 HOLES
TTSQ.
3
E1
GELEL EOEO
SE + STROKE
F J
P + STROKELB + STROKE
XE + STROKEZE + STROKE
WEE
Y
K
MM
—.005—.010
ESES
Series 2AHeavy Duty Air Cylinders
Cylinder
For Cylinder Division Plant Locations – See Page II.
39
A
1(Std.)234567890
1(Std.)34567890
1(Std.)3456789
1(Std.)345678
* Mounting style G not offered in this rod size.Caution: When using mounting style G, check clearance between mounting members and rod attachment or accessory. If necessary, specify longer rod extension to avoidinterference with mounting members.
Rod Style Style +.000Rod Dia. 8 4 & 9 -.002
Bore No. MM CC KK A B C D LA NA V W TT XT Y XE ZB ZE1.9996.2492.3742.6243.1243.7494.2494.7495.2495.7492.3742.6243.1243.7494.2494.7495.2495.7496.2492.6243.1243.7494.2494.7495.2495.7496.2493.1243.7494.2494.7495.2495.7496.249
15/8
51/2
221/4
331/2
31/2
441/2
52
21/4
331/2
31/2
441/2
551/2
21/4
331/2
31/2
441/2
551/2
331/2
31/2
441/2
551/2
5/8
13/47/8
111111
3/47/8
1111111
7/8
11111111111111
11/8
45/8
11/2
111/16
21/16
25/8
333/8
37/8
41/4
11/2
111/16
21/16
25/8
333/8
37/8
41/4
45/8
111/16
21/16
25/8
333/8
37/8
41/4
45/8
21/16
25/8
333/8
37/8
41/4
45/8
1-144-12
11/4-1211/2-1217/8-1221/4-1221/2-123-12
31/4-1231/2-1211/4-1211/2-1217/8-1221/4-1221/2-123-12
31/4-1231/2-124-12
11/2-1217/8-1221/4-1221/2-123-12
31/4-1231/2-124-12
17/8-1221/4-1221/2-123-12
31/4-1231/2-124-12
21/2
731/8
31/2
41/2
55
51/2
661/2
31/8
31/2
41/2
55
51/2
661/2
731/2
41/2
55
51/2
661/2
741/2
55
51/2
661/2
7
15/16
53/8
111/16
115/16
23/8
27/8
33/8
37/8
43/8
47/8
111/16
115/16
23/8
27/8
33/8
37/8
43/8
47/8
53/8
115/16
23/8
27/8
33/8
37/8
43/8
47/8
53/8
23/8
27/8
33/8
37/8
43/8
47/8
53/8
1/41/23/83/81/21/21/21/21/21/23/83/81/21/21/21/21/21/21/23/81/21/21/21/21/21/21/21/21/21/21/21/21/21/2
7/8
11/2
11/8
11/4
11/2
11/2
11/2
11/2
11/2
11/2
11/8
11/4
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/4
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
47444
51/2
51/2
51/2
77444
51/2
51/2
51/2
77744
51/2
51/2
51/2
7774
51/2
51/2
51/2
777
11/4-1251/4-1211/2-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1211/2-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-12
Thread
13/8
51/2
13/4
221/2
331/2
441/2
513/4
221/2
331/2
441/2
551/2
221/2
331/2
441/2
551/2
21/2
331/2
441/2
551/2
Rod Extensions and Pilot Dimensions
8
10
12
14
EEBore E EB NPTF EL EO ES ET F G J K ND NT R TN LB P SE SN
41/251/271/483/8
8101214
Series 2AHeavy Duty Air CylindersTable 1—Envelope and Mounting Dimensions
Table 2—Rod DimensionsTable 3 — Envelope andMounting Dimensions
Add Stroke
57/871/875/887/8
31/4
41/845/851/2
81/2105/8123/4
143/4
3/4
11
11/4
3/43/43/43/4
221/4
21/4
23/4
11/222
21/4
9/16
11/16
11/16
3/4
11/16
13/16
13/16
15/16
6.447.929.40
10.90
11/8
15/16
15/16
11/2
5/85/85/83/4
21/4
23/431/24
21/32
211/16
35/16
313/16
11/8
11/211/217/8
3/4-101-81-8
11/4-7
73/89
91/2111/8
31/4
41/845/851/2
213/16
37/16
31/16
33/16
37/16
37/16
37/16
37/16
37/16
37/16
31/8
31/4
31/2
31/2
31/2
31/2
31/2
31/2
31/2
31/4
31/2
31/2
31/2
31/2
31/2
31/2
31/2
313/16
313/16
313/16
313/16
313/16
313/16
313/16
81/2
*83/4
87/8
91/8
*****
103/16
105/16
109/16
109/16
109/16
109/16
***
1013/16
111/16
111/16
111/16
111/16
***
125/8
125/8
125/8
125/8
125/8
125/8
125/8
213/16
37/16
31/16
33/16
37/16
37/16
37/16
37/16
37/16
37/16
31/8
31/4
31/2
31/2
31/2
31/2
31/2
31/2
31/2
31/4
31/2
31/2
31/2
31/2
31/2
31/2
31/2
313/16
313/16
313/16
313/16
313/16
313/16
313/16
75/16
715/16
79/16
711/16
715/16
715/16
715/16
715/16
715/16
715/16
815/16
91/16
95/16
95/16
95/16
95/16
95/16
95/16
95/16
99/16
913/16
913/16
913/16
913/16
913/16
913/16
913/16
111/8
111/8
111/8
111/8
111/8
111/8
111/8
77/8
*81/8
81/4
81/2
*****
99/16
911/16
915/16
915/16
915/16
915/16
***
103/16
107/16
107/16
107/16
107/16
***
117/8
117/8
117/8
117/8
117/8
117/8
117/8
Side Tapped andSide End Lugs Mountings8" to 14" Bore Sizes
Add Stroke
For additional information – call your local Parker Cylinder Distributor.
40
Side End Angle andClevis Mountings8" to 14" Bore Sizes
Side End AnglesStyle CB(NFPA Style MS1)
Cap Fixed ClevisStyle BB(NFPA Style MP1)
Not offered in the following sizes: 8" bore, rod codes #2, 6, 7, 8, 9 and 0; 10"bore, rod codes #8, 9 and 0.
Rod End Dimensions — see table 2Thread Style 9(NFPA Style SF)Small Female
Thread Style 8(NFPA Style IM)Intermediate Male
Thread Style 4(NFPA Style SM)Small Male
A high strength rod end stud is supplied on thread style 4 through 2" diam-eter rods and on thread style 8 through 13/8" diameter rods. Larger sizes orspecial rod ends are cut threads. Style 4 rod ends are recommendedwhere the workpiece is secured against the rod shoulder. When the
workpiece is not shouldered, style 4 rod ends are recommended through 2"piston rod diameters and style 8 rod ends are recommended on largerdiameters. Use style 9 for applications where female rod end threads arerequired. If rod end is not specified, style 4 will be supplied.
“Special” ThreadStyle 3Special thread,extension, rod eye,blank, etc., arealso available.To order, specify“Style 3” and givedesired dimen-sions for CC orKK, A and LA. Ifotherwise special,furnish dimen-sional sketch.
4
3E
AHAT TTSQ.
2
E
1
SA + STROKE
F
P + STROKELB + STROKE
XA + STROKE
ZA + STROKE
WEE
Y
K
MM S
GALAO
JAL AO
ATAB 6HOLES
MM B
NA
VWA
LA
C
18
CC
D WRENCHFLATS
MM B
NA
VWA
LA
C
18
KK
D WRENCHFLATS
MM B
NA
V
A
WC
18
KK
D WRENCHFLATS
E
3
E
1
XC + STROKEF
P + STROKELB + STROKE
ZC + STROKE
WEE
Y
K
MM
CB
2
CW CWJ L MG
4
PIVOT PIN
CD
LR
MR
Series 2AHeavy Duty Air Cylinders
Cylinder
For Cylinder Division Plant Locations – See Page II.
41
A
1(Std.)234567890
1(Std.)34567890
1(Std.)3456789
1(Std.)345678
Series 2AHeavy Duty Air CylindersTable 1—Envelope and Mounting Dimensions
Table 2—Rod DimensionsTable 3 — Envelope andMounting Dimensions
* CD is pin diameter.
Rod Style Style +.000Rod Dia. 8 4 & 9 -.002
Bore No. MM CC KK A B C D LA NA V W TT Y XA XC ZA ZC1.9996.2492.3742.6243.1243.7494.2494.7495.2495.7492.3742.6243.1243.7494.2494.7495.2495.7496.2492.6243.1243.7494.2494.7495.2495.7496.2493.1243.7494.2494.7495.2495.7496.249
15/8
51/2
221/4
331/2
31/2
441/2
52
21/4
331/2
31/2
441/2
551/2
21/4
331/2
31/2
441/2
551/2
331/2
31/2
441/2
551/2
5/8
13/47/8
111111
3/47/8
1111111
7/8
11111111111111
11/8
45/8
11/2
111/16
21/16
25/8
333/8
37/8
41/4
11/2
111/16
21/16
25/8
333/8
37/8
41/4
45/8
111/16
21/16
25/8
333/8
37/8
41/4
45/8
21/16
25/8
333/8
37/8
41/4
45/8
1-144-12
11/4-1211/2-1217/8-1221/4-1221/2-123-12
31/4-1231/2-1211/4-1211/2-1217/8-1221/4-1221/2-123-12
31/4-1231/2-124-12
11/2-1217/8-1221/4-1221/2-123-12
31/4-1231/2-124-12
17/8-1221/4-1221/2-123-12
31/4-1231/2-124-12
21/2
731/8
31/2
41/2
55
51/2
661/2
31/8
31/2
41/2
55
51/2
661/2
731/2
41/2
55
51/2
661/2
741/2
55
51/2
661/2
7
15/16
53/8
111/16
115/16
23/8
27/8
33/8
37/8
43/8
47/8
111/16
115/16
23/8
27/8
33/8
37/8
43/8
47/8
53/8
115/16
23/8
27/8
33/8
37/8
43/8
47/8
53/8
23/8
27/8
33/8
37/8
43/8
47/8
53/8
1/41/23/83/81/21/21/21/21/21/23/83/81/21/21/21/21/21/21/23/81/21/21/21/21/21/21/21/21/21/21/21/21/21/2
7/8
11/2
11/8
11/4
11/2
11/2
11/2
11/2
11/2
11/2
11/8
11/4
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/4
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
47444
51/2
51/2
51/2
77444
51/2
51/2
51/2
77744
51/2
51/2
51/2
7774
51/2
51/2
51/2
777
213/16
37/16
31/16
33/16
37/16
37/16
37/16
37/16
37/16
37/16
31/8
31/4
31/2
31/2
31/2
31/2
31/2
31/2
31/2
31/4
31/2
31/2
31/2
31/2
31/2
31/2
31/2
313/16
313/16
313/16
313/16
313/16
313/16
313/16
11/4-1251/4-1211/2-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1211/2-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-12
Thread
13/8
51/2
13/4
221/2
331/2
441/2
513/4
221/2
331/2
441/2
551/2
221/2
331/2
441/2
551/2
21/2
331/2
441/2
551/2
Rod Extensions and Pilot Dimensions
91/4
97/8
91/2
95/8
97/8
97/8
97/8
97/8
97/8
97/8
113/4
117/8
121/8
121/8
121/8
121/8
121/8
121/8
121/8
127/8
131/8
131/8
131/8
131/8
131/8
131/8
131/8
147/8
147/8
147/8
147/8
147/8
147/8
147/8
89/16
*813/16
815/16
93/16
*****
103/8
101/2
103/4
103/4
103/4
103/4
***
11111/4
111/4
111/4
111/4
111/4
111/4
111/4
1213/16
1213/16
1213/16
1213/16
1213/16
1213/16
1213/16
Add Stroke
8
10
12
14
81/4
87/8
81/2
85/8
87/8
87/8
87/8
87/8
87/8
87/8
103/8
101/2
103/4
103/4
103/4
103/4
103/4
103/4
103/4
111/8
113/8
113/8
113/8
113/8
113/8
113/8
113/8
127/8
127/8
127/8
127/8
127/8
127/8
127/8
91/4
*91/2
95/8
97/8
*****
111/4
113/8
115/8
115/8
115/8
115/8
***
117/8
121/8
121/8
121/8
121/8
121/8
121/8
121/8
137/8
137/8
137/8
137/8
137/8
137/8
137/8
+.000CD* EE
Bore AB AH AL AO AT CB -.002 CW E NPTF F G J K L LR M MR S LB P SA
Add Stroke
13/16
11/16
11/16
15/16
41/4
55/16
63/873/8
113/16
21/821/827/16
11/16
7/87/8
11/16
1/41/43/83/8
11/22
21/2
21/2
1.0011.3761.7512.001
3/4
111/411/4
81/2105/8123/4
143/4
3/4
11
11/4
3/43/43/43/4
221/4
21/4
23/4
11/222
21/4
9/16
11/16
11/16
3/4
11/221/821/421/2
11/4
17/821/823/8
113/813/4
2
13/16
15/8
21/8
23/8
71/887/811
125/8
57/871/875/887/8
31/4
41/845/851/2
83/4
105/8111/813
8101214
Side End Angles andClevis Mountings8" to 14" Bore Sizes
* Mounting style G not offered in this rod size.Caution: When using mounting style G, check clearance between mounting members and rod attachment or accessory. If necessary, specify longer rod extension toavoid interference with mounting members.
For additional information – call your local Parker Cylinder Distributor.
42
Trunnion Mountings8" to 14" Bore Sizes
Head TrunnionStyle D(NFPA Style MT1)
Cap TrunnionStyle DB(NFPA Style MT2)
Intermediate Fixed TrunnionStyle DD(NFPA Style MT4)
Rod End Dimensions — see table 2Thread Style 9(NFPA Style SF)Small Female
Thread Style 8(NFPA Style IM)Intermediate Male
Thread Style 4(NFPA Style SM)Small Male
A high strength rod end stud is supplied on thread style 4 through 2" diam-eter rods and on thread style 8 through 13/8" diameter rods. Larger sizes orspecial rod ends are cut threads. Style 4 rod ends are recommendedwhere the workpiece is secured against the rod shoulder. When the
workpiece is not shouldered, style 4 rod ends are recommended through 2"piston rod diameters and style 8 rod ends are recommended on largerdiameters. Use style 9 for applications where female rod end threads arerequired. If rod end is not specified, style 4 will be supplied.
“Special” ThreadStyle 3Special thread,extension, rod eye,blank, etc., arealso available.To order, specify“Style 3” and givedesired dimen-sions for CC orKK, A and LA. Ifotherwise special,furnish dimen-sional sketch.
Series 2AHeavy Duty Air Cylinders
24E TD
E TLTLTTSQ.
3
UT1
XGF J
P + STROKELB + STROKE
ZB + STROKE
WEE
Y
K
MM
18 R
G
24E TD
E TLTLTTSQ.
3
UT1
XJ + STROKEF
P + STROKELB + STROKE
ZB + STROKE
WEE
Y
K
MM
18 R
G J
2
R18
4E UV TD
ETTSQ.
TMTL TL
3
UM1
G
XI**
F J
P + STROKELB + STROKE
ZB + STROKE
WEE
Y
BD
K
MM
MM B
NA
VWA
LA
C
18
CC
D WRENCHFLATS
MM B
NA
VWA
LA
C
18
KK
D WRENCHFLATS
MM B
NA
V
A
WC
18
KK
D WRENCHFLATS
Cylinder
For Cylinder Division Plant Locations – See Page II.
43
A
1(Std.)234567890
1(Std.)34567890
1(Std.)3456789
1(Std.)345678
+.000EE TD
Bore BD E NPTF F G J K -.001 TL TM UM UT UV LB P
Trunnion Mountings8" to 14" Bore Sizes
Rod Style Style +.000Rod Dia. 8 4 & 9 -.002 Min.**
Bore No. MM CC KK A B C D LA NA V W TT XG XI Y XJ ZB1.9996.2492.3742.6243.1243.7494.2494.7495.2495.7492.3742.6243.1243.7494.2494.7495.2495.7496.2492.6243.1243.7494.2494.7495.2495.7496.2493.1243.7494.2494.7495.2495.7496.249
15/8
51/2
221/4
331/2
31/2
441/2
52
21/4
331/2
31/2
441/2
551/2
21/4
331/2
31/2
441/2
551/2
331/2
31/2
441/2
551/2
5/8
13/87/8
111111
3/47/8
1111111
7/8
11111111111111
11/8
45/8
11/2
111/16
21/16
25/8
333/8
37/8
41/4
11/2
111/16
21/16
25/8
333/8
37/8
41/4
45/8
111/16
21/16
25/8
333/8
37/8
41/4
45/8
21/16
25/8
333/8
37/8
41/4
45/8
1-144-12
11/4-1211/2-1217/8-1221/4-1221/2-123-12
31/4-1231/2-1211/4-1211/2-1217/8-1221/4-1221/2-123-12
31/4-1231/2-124-12
11/2-1217/8-1221/4-1221/2-123-12
31/4-1231/2-124-12
17/8-1221/4-1221/2-123-12
31/4-1231/2-124-12
21/2
731/8
31/2
41/2
55
51/2
661/2
31/8
31/2
41/2
55
51/2
661/2
731/2
41/2
55
51/2
661/2
741/2
55
51/2
661/2
7
15/16
53/8
111/16
115/16
23/8
27/8
33/8
37/8
43/8
47/8
111/16
115/16
23/8
27/8
33/8
37/8
43/8
47/8
53/8
115/16
23/8
27/8
33/8
37/8
43/8
47/8
53/8
23/8
27/8
33/8
37/8
43/8
47/8
53/8
1/41/23/83/81/21/21/21/21/21/23/83/81/21/21/21/21/21/21/23/81/21/21/21/21/21/21/21/21/21/21/21/21/21/2
7/8
11/2
11/8
11/4
11/2
11/2
11/2
11/2
11/2
11/2
11/8
11/4
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/4
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
47444
51/2
51/2
51/2
77444
51/2
51/2
51/2
77744
51/2
51/2
51/2
7774
51/2
51/2
51/2
777
11/4-1251/4-1211/2-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1211/2-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-1213/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-1221/4-1223/4-1231/4-1233/4-1241/4-1243/4-1251/4-12
Thread
13/8
51/2
13/4
221/2
331/2
441/2
513/4
221/2
331/2
441/2
551/2
221/2
331/2
441/2
551/2
21/2
331/2
441/2
551/2
Rod Extensions and Pilot Dimensions
415/16
59/16
53/16
55/16
59/16
53/16
59/16
59/16
59/16
59/16
511/16
513/16
61/16
61/16
61/16
61/16
61/16
61/16
61/16
513/16
61/16
61/16
61/16
61/16
61/16
61/16
61/16
613/16
613/16
613/16
613/16
613/16
613/16
613/16
8
10
12
14
665/8
61/4
63/8
65/8
65/8
65/8
65/8
65/8
65/8
71/4
73/8
75/8
75/8
75/8
75/8
75/8
75/8
75/8
77/8
81/8
81/8
81/8
81/8
81/8
81/8
81/8
91/4
91/4
91/4
91/4
91/4
91/4
91/4
**Dimension XI to be specified by customer.
31/441/845/851/2
8101214
3/4
11
11/4
111/4
141/8161/4183/4
91/2
113/4133/416
Series 2AHeavy Duty Air CylindersTable 1—Envelope and Mounting Dimensions
Table 2—Rod DimensionsTable 3 — Envelope andMounting Dimensions
213/16
37/16
31/16
33/16
37/16
37/16
37/16
37/16
37/16
37/16
31/8
31/4
31/2
31/2
31/2
31/2
31/2
31/2
31/2
31/4
31/2
31/2
31/2
31/2
31/2
31/2
31/2
313/16
313/16
313/16
313/16
313/16
313/16
313/16
75/16
715/16
79/16
711/16
715/16
715/16
715/16
715/16
715/16
715/16
815/16
91/16
95/16
95/16
95/16
95/16
95/16
95/16
95/16
99/16
913/16
913/16
913/16
913/16
913/16
913/16
913/16
111/8
111/8
111/8
111/8
111/8
111/8
111/8
25/8
31/4
27/8
331/4
31/4
31/4
31/4
31/4
31/4
331/8
33/8
33/8
33/8
33/8
33/8
33/8
33/8
31/8
33/8
33/8
33/8
33/8
33/8
33/8
33/8
35/8
35/8
35/8
35/8
35/8
35/8
35/8
Add Stroke StyleDD
Min.Stroke
81/2105/8123/4
143/4
3/43/43/43/4
221/4
21/4
23/4
11/222
21/4
9/16
11/16
11/16
3/4
21/2
33
31/2
1.3751.7501.7502.000
13/813/4
13/4
2
93/4
1214
161/4
121/2
151/2171/2201/4
57/871/875/887/8
7/87/83/83/8
Add Stroke
For additional information – call your local Parker Cylinder Distributor.
44
Series 2AHeavy Duty Air Cylinders
Spherical Bearing MountingStyle SB11/2" to 6" Bore Sizes
Rod Style StyleRod Dia. 9 7
Bore No. MM KK KK A W XC XL ZC KE CD* CE ER EX LE MA MS NR3/43/43/43/43/43/43/43/43/4
11/8
11/8
11/8
11/8
11/8
11/8
11/8
11/8
11/8
11/8
11/8
11/8
11/8
11/8
11/8
11/8
15/8
15/8
15/8
15/8
15/8
15/8
15/8
61/4
65/8
61/4
67/8
65/8
63/8
71/4
63/4
781/8
83/4
83/8
85/8
81/8
983/8
85/8
83/4
83/8
91/4
85/8
87/8
991/4
91/4
10105/8
101/4
103/8
105/8
105/8
105/8
—
7/16-20—
7/16-207/16-20
—
7/16-207/16-207/16-20
—
3/4-163/4-163/4-16
—
3/4-163/4-163/4-163/4-16
—
3/4-163/4-163/4-163/4-163/4-163/4-16
—
1-141-141-141-141-141-14
61/8
61/2
61/8
63/4
61/2
61/4
71/8
65/8
67/8
77/8
81/2
81/8
83/8
77/8
83/4
81/8
83/8
81/2
81/8
983/8
85/8
83/4
99
93/8
1095/8
93/4
101010
11/2
17/8
11/2
21/8
17/8
11/2
23/8
17/8
21/8
225/8
21/4
21/2
227/8
21/4
21/2
25/8
227/8
21/4
21/2
25/8
27/8
27/8
23/4
33/8
331/8
33/8
33/8
33/8
-.0005.5000
-.0005
.5000
-.0005
.5000
-.0005
.7500
-.0005
.7500
-.0005
.7500
-.00051.0000
7/16-20**
7/16-20****
7/16-20******
3/4-16******
3/4-16********
3/4-16************
1-14************
Thread
11/2
2
21/2
31/4
4
5
6
5/8
15/8
13/8
15/8
13/4
113/8
12
13/8
13/4
121/2
13/8
13/4
21
31/2
13/8
13/4
221/2
313/8
413/4
221/2
331/2
Add Stroke
5/8
15/8
11/4
15/8
11/2
111/43/4
13/8
111/43/4
15/8
111/4
13/83/4
15/8
111/4
13/8
15/8
15/87/8
11/2
11/8
11/4
11/2
11/2
11/2
53/8
53/4
53/8
653/4
51/2
63/8
57/8
61/8
67/8
71/2
71/8
73/8
67/8
73/4
71/8
73/8
71/2
71/8
873/8
75/8
73/4
88
81/8
83/4
83/8
81/2
83/4
83/4
83/4
3/4
3/4
3/4
11/16
11/16
11/16
17/16
13/16
13/16
13/16
11/8
11/8
11/8
11/4
7/16
7/16
7/16
21/32
21/32
21/32
7/8
3/4
3/4
3/4
1
1
1
11/4
7/8
7/8
7/8
11/4
11/4
11/4
17/8
5/8
5/8
5/8
1
1
1
11/4
250
250
250
250
250
250
250
Max.Oper.PSI2A
1(Std.)2
1(Std.)23
1(Std.)234
1(Std.)234
1(Std.)2345
1(Std.)234567
1(Std.)234567
4
EX
CD
LUBRICATIONFITTING
LUBRICATIONFITTING
3
2
1
CD
MA
A
KE
LE
ER
CE
KKW
ZC + STROKEXC + STROKE
XL + STROKE
NR
MS
4
EX3
2
1
15/16
15/16
15/16
13/8
13/8
13/8
111/16
Maximum operating pressure at 4:1 design factor is based on tensile strength of material. Pressure ratings are based on standard commercial bearing ratings.Note: For additional dimensions see Series 2A, page 30.* Dimension CD is hole diameter.** Corresponding rod eye pin diameter may not match pin diameter of cap.Rod No. 1 is standard.
Cylinder
For Cylinder Division Plant Locations – See Page II.
45
A
Maximum operating pressure at 4:1 design factor is based on tensile strength of material. Pressure ratings are based on standard commercial bearing ratings.Note: For additional dimensions see Series 2A, page 30.* Dimension CD is hole diameter.** Corresponding rod eye pin diameter may not match pin diameter of cap. Rod No. 1 is standard.
11/4
15/8
21/16
23/8
250
250
250
250
-.0005
1.0000
-.0005
1.3750
-.0005
1.7500
-.00052.0000
1(Std.)234567890
1(Std.)34567890
1(Std.)3456789
1(Std.)345678
Series 2AHeavy Duty Air Cylinders
Spherical Bearing MountingStyle SB8" to 14" Bore Sizes
Rod Style StyleRod Dia. 9 7
Bore No. MM KK KK A W XC XL ZC KE CD* CE ER EX LE MA MS NR15/8
15/8
15/8
15/8
15/8
15/8
15/8
15/8
15/8
15/8
222222222
21/4
21/4
21/4
21/4
21/4
21/4
21/4
21/4
3333333
81/4
87/8
81/2
85/8
87/8
87/8
87/8
87/8
87/8
87/8
103/8
101/2
103/4
103/4
103/4
103/4
103/4
103/4
103/4
111/8
113/8
113/8
113/8
113/8
113/8
113/8
113/8
127/8
127/8
127/8
127/8
127/8
127/8
127/8
101/8
103/4
103/8
101/2
103/4
103/4
103/4
103/4
103/4
103/4
121/2
125/8
127/8
127/8
127/8
127/8
127/8
127/8
127/8
135/8
137/8
137/8
137/8
137/8
137/8
137/8
137/8
155/8
155/8
155/8
155/8
155/8
155/8
155/8
–1-141-141-141-141-141-141-141-141-14
–11/4-1211/4-1211/4-1211/4-1211/4-1211/4-1211/4-1211/4-12
–11/2-1211/2-1211/2-1211/2-1211/2-1211/2-1211/2-12
–17/8-1217/8-1217/8-1217/8-1217/8-1217/8-12
91/2
101/8
93/4
97/8
101/8
101/8
101/8
101/8
101/8
101/8
121/4
123/8
125/8
125/8
125/8
125/8
125/8
125/8
125/8
135/8
137/8
137/8
137/8
137/8
137/8
137/8
137/8
153/8
153/8
153/8
153/8
153/8
153/8
153/8
23/4
33/8
331/8
33/8
33/8
33/8
33/8
33/8
33/8
31/4
33/8
35/8
35/8
35/8
35/8
35/8
35/8
35/8
33/4
4444444
41/4
41/4
41/4
41/4
41/4
41/4
41/4
1-14******************
11/4-12****************
11/2-12**************
17/8-12************
Thread
13/8
51/2
13/4
221/2
331/2
441/2
513/4
221/2
331/2
441/2
551/2
221/2
331/2
441/2
551/2
21/2
331/2
441/2
551/2
8
10
12
14
7/8
11/2
11/8
11/4
11/2
11/2
11/2
11/2
11/2
11/2
11/8
11/4
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/4
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
11/2
Add Stroke
11/4
111/16
21/16
21/2
17/8
21/8
21/2
23/4
111/16
27/16
27/8
35/16
17/16
17/8
21/8
21/2
7/8
13/16
117/32
13/4
11/4
17/8
21/2
21/2
Max.Oper.PSI2A
4
EX
CD
LUBRICATIONFITTING
LUBRICATIONFITTING
3
2
1
CD
MA
A
KE
LE
ER
CE
KKW
ZC + STROKEXC + STROKE
XL + STROKE
NR
MS
4
EX3
2
1
For additional information – call your local Parker Cylinder Distributor.
46
Series 2AHeavy Duty Air Cylinders
Double Rod Models1" to 14" Bore Sizes
MountingStyles for
Single RodModels
TTB**TDJ
JB**C**EF
CBGD
DD
MountingStyles for
CorrespondingDouble Rod
Models*
KTKTBKTDKJ
KJBKCKEKF
KCBKCKD
KDD
Dimensions Shown onThis Page SupplementDimensions on Pages
Listed Below1"-6" 8"-14"Bores Bores
Page No. Page No.
20
202020
222424
242626
2828
343434
—3436
363840
384242
*If only one end of these Double Rod Cylinders is tobe cushioned, be sure to specify clearly which endthis will be.**Available in 7" bore, page 32.
Add Stroke
1
11/2
2
21/2
31/4
4
5
6
7
8
10
12
14
Add 2XStroke
6
61/8
61/8
61/4
71/2
71/2
73/4
83/4
87/8
87/8
103/8
111/8
131/8
—
All Mtgs.
51/2
53/4
513/16
515/16
71/8
71/8
77/16
85/16
—
—
—
—
—
ZB
*
61/2
63/4
7
8
81/8
89/16
93/8
—
9
107/16
111/16
131/8
ZE
*
61/4
67/16
611/16
75/8
73/4
81/16
87/8
—
83/8
913/16
107/16
123/8
XE
G
*
63/8
63/4
71/8
73/4
8
83/8
9
—
77/8
91/4
93/4
115/8
SE
21/8
21/4
21/4
23/8
25/8
25/8
27/8
31/8
31/4
31/4
41/8
45/8
51/2
SN
F
33/8*
33/8
33/8
31/2
33/4
33/4
35/8
41/8
41/4
41/4
47/8
53/8
63/8
SS
C,E
61/2
67/8
67/8
7
81/2
81/2
9
97/8
—
93/4
111/2
121/8
143/8
ZA
63/16
61/2
61/2
65/8
8
8
83/8
91/4
—
91/16
105/8
111/4
135/16
XA
CB
63/8
67/8
67/8
7
81/2
81/2
9
93/4
—
91/4
107/8
113/8
131/2
SA
1
1
1
1
1
1
1
1
1
1
1
1
1
Replaces:On single rod
mounting styles: All Mtg. Styles
* Mounting styles KE, KG and KDD not available in 1" and 7" bore sizes.
RodRod Dia.
Bore No. MM LD ZL SAK XAK ZAK SSK SNK SEK XEK ZEK ZM1/25/85/85/8
1
1
1
13/8
13/8
13/8
13/4
2
21/2
43/4
47/8
47/8
5
6
6
61/4
7
71/8
71/8
81/8
85/8
101/8
LB
All dimensions are in inches and apply to Code 1 rod sizes only. For alternate rod sizes,determine all envelope dimensions (within LD dim.) as described above and then useappropriate rod end dimensions for proper rod size from single rod cylinder.
To determine dimensions for a double rodcylinder, first refer to the desired single rodmounting style cylinder shown on precedingpages of this catalog. (See table at left.) Afterselecting necessary dimensions from thatdrawing, return to this page supplement thesingle rod dimensions with those shown ondrawings at right and dimension table below.Note that double rod cylinders have a head(Dim. G) at both ends and that dimension LDreplace LB and ZL replaces ZB, etc. Thedouble rod dimensions differ from, or are in
addition to those for single rod cylindersshown on preceding pages and provide theinformation needed to completely dimensiona double rod cylinder.On a double rod cylinder where the two rodends are different, be sure to clearly statewhich rod end is to be assembled at whichend. Port position 1 is standard. If other thanstandard, specify pos. 2, 3 or 4 when viewedfrom one end only. See port positioninformation in Section C.
How to Use Double Rod Cylinder Dimensioned Drawings
F
P + STROKELD + STROKE
ZM + 2 X STROKE
WEE
Y
K
MM
G F
GWF
GFK
G F
P + STROKELD + STROKE
ZM + 2 X STROKE
ZL + STROKE
W
EE
Y
MM
1"- 6" Bores
7"- 14" Bores
Cylinder
For Cylinder Division Plant Locations – See Page II.
47
A
CL
CD
Spherical Rod Eye
Order to fit Piston Rod Thread Size.
Series 2AHeavy Duty Air Cylinders
Cylinder AccessoriesSpherical Bearing MountingStyle SB
Bore 11/2 2 & 21/2 31/4 4 5 6 Sizes Series 2A 11/2, 2 & 21/2 31/4, 4 & 5 6 & 8 10 12 14
Part No. 83947 83948 83949 83950 83951 83952
CD
CF
CW
DD
E
F
FL
LR
M
MR
R
LOADCAPACITY
LBS.
1/27/16
1/213/32
31/2
11/215/16
1/25/8
2.05
3/421/32
5/817/32
33/45/8
213/87/8
12.76
17/83/4
17/32
51/23/4
21/2
111/16
113/16
4.10
13/8
13/16
121/32
61/27/8
31/2
27/16
13/8
15/8
4.95
13/4
117/32
11/429/32
81/2
11/4
41/2
27/8
13/4
21/16
6.58
213/4
11/229/32
105/8
11/2
535/16
223/8
7.92
9450 14300 20322 37800 503755770
CD
CL
LOADCAPACITY
LBS.
Bore 11/2 2 & 21/2 31/4 4 5 6 Sizes Series 2A 11/2, 2 & 21/2 31/4, 4 & 5 6 & 8 10 12 14Pivot Pin Part No. 83962 83963 83964 83965 83966 83967
.4997-0004
19/16
.7497-0005
21/32
.9997-0005
21/2
1.3746-0006
35/16
1.7496-0006
47/32
1.9996-0007
415/16
19300 34300 65000 105200 1374008600
Bore 2 & 21/2 31/4 4 5 6 Sizes Series 2A 11/2, 2 & 21/2 31/4, 4 & 5 6 & 8 10 12 14Rod Eye Part No. 132290 132291 132292 132293 132294 132295
.5000-0005
11/16
7/87/16
13/16
3/47/16-20
7/8
.7500-0005
111/421/32
11/8
11/16
3/4-1615/16
1.0000-0005
11/2
17/87/8
11/4
17/16
1-1411/2
1.3750-0005
221/8
13/16
111/16
17/8
11/4-122
1.7500-0005
21/8
21/2
117/32
21/16
21/8
11/2-1221/4
2.0000-0005
27/8
23/4
13/4
21/2
21/2
17/8-1223/4
CD
A
CE
EX
ER
LE
JK
JL
LOADCAPACITY
LBS.2644 9441 16860 28562 43005 70193
Parker offers a complete range of Cylinder Accessoriesto assure you of the greatest versatility in present orfuture cylinder applications. Accessories offered for the
respective cylinder include the Rod Eye, Pivot Pin andClevis Bracket. To select the proper part number for anydesired accessory refer to the charts below.
Clevis Bracket
LE
CD
JKTHD
ER (MAX)
LUBEFITTING
CE
A
EX
JL DIA
Pivot Pin
Pivot Pins are furnished with(2) Retainer Rings.
Clevis Bracket
Order to fit Mounting Plate or Rod Eye.
MR
LR
RE
DD DIA4 HOLES
F
M
FL
CW CWCF
+ .004+ .002
RE
CD
For additional information – call your local Parker Cylinder Distributor.
48
†For alignment coupler dimensions, see Section C.*Cylinder accessory dimensions conform to NFPA recommended standard NFPA/T3.6.8 R1-1984, NFPA recommended standardfluid power systems — cylinder — dimensions for accessories for cataloged square head industrial types. Parker adopted thisstandard in April, 1985. Eye Brackets or Mounting Plates shipped before this date may have different dimensions and will notnecessarily interchange with the NFPA standard. For dimensional information on older style Eye Brackets or Mounting Platesconsult Drawing #144805 or previous issues of this catalog.NOTE: For economical accessory selection, it is recommended that rod end style 4 be specified on your cylinder order.
Cylinder AccessoriesParker offers a complete range of cylinder accessories to assure you ofgreatest versatility in present or future cylinder applications.
Rod End AccessoriesAccessories offered for the rod end of the cylinder include Rod Clevis, EyeBracket, Knuckle, Clevis Bracket and Pivot Pin. To select the proper partnumber for any desired accessory, refer to Chart A below and lookopposite the thread size of the rod end as indicated in the first column. ThePivot Pins, Eye Brackets and Clevis Brackets are listed opposite thethread size which their mating Knuckles or Clevises fit.
Chart ACB
CDER +.004+.002
CD CA
CD
CDKK THREAD
A FULLTHREAD
CBCW CWER
KK THREAD
+.004+.002CD
A
CE
❡ Female Rod Clevis
Order to fit thread size.
① Knuckle (Female Rod Eye)
Order to fit thread size.
Clevis Bracket for Knuckle
Order to fit Knuckle.
♠ Mounting Plate or Eye Bracket
1. When used to mate with the Rod Clevis, select from Chart A.2. When used to mount the Style BB or BC cylinders, select from the
Mounting Plate Selection Table. See Chart B at lower left.
⑧ Pivot Pin
1. Pivot Pins are furnished with Clevis Mounted Cylinders as standard.2. Pivot Pins are furnished with (2) Retainer Rings.3. Pivot Pins must be ordered as a separate item if to be used with
Knuckles, Rod Clevises, or Clevis Brackets.
➁
➁
➁
➁
➁
CylinderAccessories
25¡MR
LR
RE
DD DIA4 HOLES
F
M
FL
CW CWCB
+ .004+ .002
RE
CD
MR
LR
RE
DD DIA4 HOLES
F
M 25°
FL
CB
+ .004+ .002
RE
CD
CL
CD+.001—.002
Series 2AHeavy Duty Air Cylinders
♠
⑧❡
①
Mounting PlatesMounting Plates for Style BB and Style BC (Clevismounted) cylinders are offered. To select proper part number for yourapplication, refer to Chart B, above right.
Accessory Load CapacityThe various accessories on Pages 48 and 49 havebeen load rated for your convenience. The loadcapacity in lbs. shown on page 49, is therecommended maximum load for that accessorybased on a 4:1 design factor in tensions. (Pivot Pinis rated in shear.) Before specifying, compare theactual load or the tension (pull) force at maximumoperating pressure of the cylinder with the loadcapacity of the accessory you plan to use. If load orpull force of cylinder exceeds load capacity ofaccessory, consult factory.
Mating PartsMating Parts
5/16-247/16-201/2-203/4-163/4-167/8-141-141-14
11/4-1211/4-1211/2-1213/4-1217/8-1221/4-1221/2-1223/4-1231/4-1231/2-124-12
41/2-12
51221509405094150942
1332845094350944
13328550945
133286509465094750948509495095050951509525095350954
–
7407769195691956919669196*85361*85361*853616919869198*85362*85363*85363*85364*85365*85365735387353973539
–
—683686836868369683696837068370683706837168371683726837368373683746837568375735457354773547
–
7407569089690906909169091690926909369093690946909469095690966909769098690996910073536734377343873439
74076692056920569206†
69206692076920769207692086920869209692106921069211692126921373542735427354373544
7407868368683686836968369683706837068370683716837168372692156921568374683756921673545735458218173547
134757 0031134757 0044134757 0050134757 0075134757 0075134757 0088134757 0100134757 0100
ConsultFactory
Thread Rod Eye Clevis Alignment Size Clevis Bracket Pin Knuckle Bracket Pin Coupler
Mtg. PlatePart No.
74076‡
69195
69196
*85361
69198
*85362
*85363
Series 2ABore Size
1"
11/2", 2", 21/2"
31/4", 4", 5"
6", 7", 8"10"
12"14"
Chart B
‡Mounting plate for 1" bore single lugBC & BB cylinder mounting style isClevis Bracket P/N 74076.
Cylinder
For Cylinder Division Plant Locations – See Page II.
49
A
Series 2AHeavy Duty Air Cylinders
CylinderAccessories
509534‡
41/24
813/16
21/44
31/2-12
193200
5095131/233
63/411/223/4
23/4-12
98200
509544‡
41/24
813/16
21/44
4-12
221200
5095231/2‡
431/273/42
31/231/4-12
156700
Clevis Bracket for Knuckle Part Number
Eye Bracket and Mounting Plate Part Number
ACBCDCECWERKK
Load Capacity Lbs. O
CBCDCWDDEF
FLLRM
MRR
Load Capacity Lbs.O
51221†
13/16
11/32
5/16
21/413/64
19/64
5/16-24
2600
509403/43/41/211/21/21/2
7/16-20
4250
509413/43/41/211/21/21/2
1/2-20
4900
13328411/811/43/423/85/83/4
3/4-16
11200
5094315/811/21
215/16
3/41
7/8-14
18800
5094415/811/21
215/16
3/41
1-14
19500
5094211/811/43/421/85/83/4
3/4-16
11200
13328515/811/21
31/83/41
1-14
19500
13328622
13/841/81
13/811/4-12
33500
5094621/421/213/441/211/413/4
11/2-12
45600
5094931/23
21/261/211/221/2
21/4-12
98200
5095031/233
63/411/223/4
21/2-12
98200
5094522
13/833/41
13/811/4-12
33500
509473
21/22
51/211/42
13/4-12
65600
509483
21/22
51/211/42
17/8-12
65600
7407615/32
7/16
3/817/64
21/43/81
5/83/81/2
1.75
3600
692053/41/21/2
13/32
31/21/2
11/23/41/25/8
2.55
7300
6920611/43/45/8
17/32
55/8
17/813/16
3/429/32
3.82
14000
6920711/21
3/421/32
61/23/4
21/411/21
11/44.95
19200
692082
13/81
21/32
71/27/832
13/8121/32
5.73
36900
6920921/213/411/429/32
91/27/8
35/823/413/427/32
7.50
34000
692113
21/211/213/16
123/41
41/231/221/231/89.40
34900
6921021/22
11/211/16
123/41
41/433/16
21/4225/32
9.40
33000
6921233
11/215/16
123/416
41/43
319/32
9.40
33800
6921331/23
11/215/16
123/416
41/43
319/32
9.40
36900
735424
31/22
113/16
151/2111/16
611/16
531/241/8
12.00
83500
7354341/242
21/16
171/2115/16
711/16
53/44
47/813.75
102600
73544542
21/16
171/2115/16
711/16
53/44
47/813.75
108400
740775/16
5/16
17/64
21/43/81
5/83/81/2
1.75
1700
691953/41/2
13/32
21/23/8
11/83/41/2
9/16
1.63
4100
85363*21/22
11/16
71/211/24
21/22
27/16
5.73
70000
CBCDDDEF
FLLRM
MRR
Load Capacity Lbs.O
6919611/43/4
17/32
31/25/8
17/811/43/47/8
2.55
10500
85361*11/21
21/32
41/27/8
23/811/21
11/43.25
20400
691982
13/821/32
57/83
21/813/815/83.82
21200
85362*21/213/429/32
61/211/833/821/413/421/84.95
49480
Pivot Pin Part Number
CDCL
Shear Capacity Lbs.O
85364*3
21/213/16
81/213/443/43
21/23
6.58
94200
Knuckle Part Number74075
3/411/27/16
7/16
19/32
5/16-24
3300
690893/4
11/23/41/2
23/32
7/16-20
5000
7343951/291/854
511/16
41/2-12
308500
7343851/291/841/24
511/16
4-12
273800
734375
75/84
31/2431/32
31/2-12
217300
735364‡
75/84
31/2431/32
31/4-12
161300
6910035/861/231/23
41/423/4-12
123300
6909931/261/833
41/421/2-12
110000
6909831/2
513/16
321/239/16
21/4-12
98700
6909735
21/22
227/32
17/8-12
75000
6909621/443/821/22
227/32
13/4-12
53500
6909521/44
21/213/421/2
11/2-12
45000
690942
37/16
213/8
131/32
11/4-12
33500
6909315/8
213/16
11/21
17/16
1-14
21700
6909211/823/811/21
17/16
7/8-14
13000
6909111/821/16
11/43/4
11/16
3/4-16
12100
690903/4
11/23/41/2
23/32
1/2-20
5700
ACACBCDERKK
Load Capacity Lbs.O
85365*33
15/16
91/22
51/431/423/431/47.50
121900
735384
31/2113/16
125/8111/16
511/16
431/241/89.62
57400
7353941/24
21/16
147/8115/16
67/16
41/24
51/411.45
75000
740787/16
15/16
6600
683681/2
17/8
8600
683693/4
25/8
19300
683701
31/8
34300
6837113/841/8
65000
6837213/453/16
105200
683732
53/16
137400
692152
511/16
137400
6837421/263/16
214700
683753
61/4
309200
692163
63/4
309200
7354531/281/4
420900
73547•
49
565800
821814
85/8
565800
Female Rod Clevis Part Number
*Cylinder accessory dimensions conform to NFPA recommended standard NFPA/T3.6.8 R1-1984, NFPA recommended standard fluid power systems — cylinder — dimensions foraccessories for cataloged square head industrial types. Parker adopted this standard in April, 1985. Eye Brackets or Mounting Plates shipped before this date may have different dimensionsand will not necessarily interchange with the NFPA standard. For dimensional information on older style Eye Brackets or Mounting Plates consult Drawing #144805 or previous issues of thiscatalog.O See Accessory Load Capacity note on page 48.•These sizes supplied with cotter pins.†Includes Pivot Pin.‡Consult appropriate cylinder rod end dimensions for compatibility.
For additional information – call your local Parker Cylinder Distributor.
50
How to OrderService Policy
How to Order Series 2A Cylinders
Series 2AHeavy Duty Air Cylinders
Data Required on All Cylinder OrdersWhen ordering Series 2A cylinders, be sure to specify each of the following requirements:
Additional Data:
Note: Duplicate cylinders can be ordered by giving the SERIAL NUMBER from the nameplate of the original cylinder. Factory records supplya quick positive identification.Bore:Mounting Style:
Series Designation (2A)Length of StrokePiston Rod Diameter:
Piston Rod End Thread Style:
Cushions (If required):
Specify bore in inches.Specify your choice of mounting style — as shown and dimensions in this catalog. If double rod iswanted, specify “with double rod”.
Specify rod diameter or rod code number. In Series 2A cylinders, standard rod diameters (Code No.1) will be furnished if not otherwise specified, unless length of stroke makes the applicationquestionable.
Give thread style number or specify dimensions. Thread style number 4 will be furnished if nototherwise specified.Specify “Cushion-head end”, “Cushion-cap end” or “Cushion-both ends” as required. If cylinder isto have a double rod and only one cushion is required, be sure to specify clearly which end of thecylinder is to be cushioned.
Additional data is required on orders for cylinders with special modifications and cylinders for waterhydraulic service. For further information, consult factory.
WarrantySeller warrants the goods sold hereunder to be free from defects inmaterial and workmanship. This warranty shall terminate eighteen monthsafter date of shipment from Seller’s plant and claims not made in writingwithin such period are waived.The above warranty does not extend to goods damaged after date ofshipment from Seller’s plant where damage is not directly due to a defectin material or workmanship, nor does it apply to goods altered or repairedby anyone other than Seller’s authorized employees, nor to goodsfurnished by Buyer or acquired at Buyer‘s request and/or to Buyer’sspecifications.If the goods are in accordance with or in reference to an engineeringdrawing specified by or furnished to the customer, the specifications andinformation on the drawing shall be applicable in determining such correctuse, operation and application.
When claiming a breach of warranty, Buyer must notify Seller promptlywhereupon Seller will either examine the goods at their site, or issueshipping instructions for return to Seller (transportation costs prepaid byBuyer). When any goods sold hereunder are proved as not warranted,Seller’s sole obligation under this warranty shall be to repair or replace thegoods, at its option, without charge to Buyer.The above warranty comprises Seller’s sole and entire warrantyobligation and liability to Buyer, its customers and assigns inconnection with goods sold hereunder. All other warranties, expressor implied, including but not limited to, warranties of merchantabilityand fitness, are expressly excluded.
Service PolicyOn cylinders returned to the factory for repairs, it is standard policy for theCylinder Division to make such part replacements as will put the cylinderin as good as new condition. Should the condition of the returned cylinderbe such that expenses for repair would exceed the costs of a new one,you will be notified.Address all correspondence and make shipments to, Service Departmentat your nearest regional plant listed on page VI.
Certified DimensionsParker Cylinder Division guarantees that all cylinders ordered from thiscatalog will be built to dimensions shown. All dimensions are certified to becorrect, and thus it is not necessary to request certified drawings.
Class 1 SealsClass 1 seals are the seals provided as standard in a cylinder assemblyunless otherwise specified. For further information on fluid compatibility oroperating limitations of all components, see section C.For the 2A series cylinders the following make-up Class 1 Seals: Primary Piston Rod Seal – Nitrile with leather back-up washers
Piston Rod Wiper – Nitrile Piston Seals – Nitrile with polymyte back-up washers O-Rings – Nitrile
1/4
1/4
E
E
1" Bore Cylinder OnlyHead End
Cylinder
For Cylinder Division Plant Locations – See Page II.
51
A
—CK
TBTCTDJHJBHBCEF
CBG
BBD
DBDDBCSBPMRAs
listedabove–2A
–U
TRBGFVW
S
1234567890
4893
2
AWMC–
—C101-103
A4620 & 3420 & 3420 & 34
2020
22 & 3422 & 3424 & 3624 & 3624 & 3826 & 4026 & 3830 & 4028 & 4228 & 4228 & 42
3044 & 45
C93C89-91
C88––––
–C89-91
C89-91C89-91C89-91C89-91
A19C83C83
C89-91C89-91C104C83C95C93C93C83
––––––––––
C92C92C92C92
C92
C92C92C92
C101-C103C93
Series 2AHeavy Duty Air Cylinders
Series 2A Model Numbers – How to Develop Them – How to “Decode” ThemParker Series 2A cylinders can be completely and accuratelydescribed by a model number consisting of coded symbols. For singlerod cylinders a maximum of 16 places for digits and letters are used ina prescribed sequence to produce a model number. Only eight placesare needed to completely describe a standard non-cushioned Series
2A cylinder. To develop a model number, select only those symbolsthat represent the cylinder required, and place them in the sequenceindicated below.Note: Page numbers with a letter prefix, ie: C77, are located insection C of this catalog.
Feature Description Page No. SymbolBore* Specify in inches
Used only if cushion requiredUsed only if double-rod cylinder is requiredHead Tie Rods ExtendedCap Tie Rods ExtendedBoth End Tie Rods ExtendedHead Rectangular FlangeCap Rectangular FlangeHead Square FlangeCap Square FlangeSide LugsCenterline LugsSide TappedSide End AnglesSide End LugsCap Fixed ClevisHead TrunnionCap TrunnionIntermediate Fixed TrunnionCap Detachable ClevisSpherical BearingThrust Key (Styles C,F,G, & CB only)Manifold Port O-Ring Seal (Style C only)Removable TrunnionsAny Practical Mounting StyleListed Above
Used in all 2A Model NumbersLipseal® Piston standard. No need forsymbol in model number.NPTF (Dry Seal Pipe Thread) is standard.Used only for SAE Straight Thread O-RingPortUsed only for BSP (Parallel Thread)Used only for BSPT (Taper Thread)Used only for Metric ThreadNut Retained PistonViton SealsWater ServiceUsed only if special Modifications arerequired: Oversize Ports
Port Position ChangeRod End BellowsSpecial SealsStop TubeStroke AdjusterTie Rod SupportsWater Service Modification
For Single Rod Cylinders, select one only.Refer to Rod number listing, Table 2,Pages 20 through 43.Note: Check chart in Section C, page 96 forminimum piston rod diameter
Select:Style 4 Small MaleStyle 8 Intermediate MaleStyle 9 Short FemaleStyle 3 Special (Specify)Used only for stud two times longer thanstandard.
UNF StandardBSF (British Fine)MetricUsed only if cushion requiredSpecify in inches
Double RodCylinders
For double rodcylinders, specify rodnumber and rod endsymbols for both pistonrods. A typical doublerod model numberwould be:
6" KJ-2AU14A/14AX12"
6" C K F P TB –2A T V S 1 4 2 A C 12"
Cushion-HeadDouble-RodMounting*Style
*Required for Basic Cylinder Model Number
Model Numbers
MountingModifications
CombinationMountingStyle
Series*Piston
Ports*
CommonModifications
SpecialModifications
Piston Rod*Number
Piston*Rod End
Piston RodAlternateThread
Piston Rod*Threads
Cushion-CapStroke*
Dark Arrows Indicate Basic Minimum Model NumberCylinder serial numbers are factory production record numbers and areassigned to each cylinder, in addition to the model number.
Use Symbol S to designate any special
modification except piston rod end.
Styles 4, 8, and 9 are catalog standards
Specify Style 3 for any special piston rod end.