panasonic kx-tde with sip trunking
DESCRIPTION
Panasonic KX-TDE With SIP Trunking. TDE0.0001 SIP presentation. Specifications subject to change without notice. Install Sip Card. Press the Activation Key. Install a V-SIPGW16 Card in an available slot and take the card out of service. Activation Key. Do Not Activate this key. - PowerPoint PPT PresentationTRANSCRIPT
1
Panasonic KX-TDE With SIP Trunking
Specifications subject to change without notice
TDE0.0001 SIP presentation
2
Install Sip Card
Install a V-SIPGW16 Card in an available slot and take the card out of
service
Press the Activation Key
3
Activation Key
Do Not Activate this key
The Sip Trunk will use the 4-Channel IP Trunk License
4
Shelf Property-Virtual SIP Gateway
This will be the customers Static IP Address
5
Card Property- Virtual SIP Gateway
Enter the Preferred and Alternate DNS Server IP. This can be found in the CMD prompt by typing Ipconfig /all
6
Port Property- Virtual SIP Gateway
Change the first bin to Basic Channel. You may purchase up to 16 Additional Channels. The DSP16
comes with a license for 4, and the DSP comes with a license for 16. Each additional bin would be listed as
Additional Channel for CH1
7
Port Property- Virtual SIP Gateway
Enter the IP Address given to you by the provider
8
Enter the Extension Number given to you by the Provider
9
Port Property- Register
Re-enter the IP Address given to you by the Provider
10
Port Property
Select the Codec the Provider is using
11
IPCMPR Card Property
The IPCMPR Card must have the correct IP Address, Subnet Mask and Default Gateway entered
12
10.1 CO Line Settings
Place the SIP Trunks in a Trunk Group by themselves
13
10.2 CO DIL Table
Change the DID setting to DIL and assign the correct Ring Group