palmsecure set up guide - fujitsu set up guide.pdfpalmsecure summa your system has been configured...

1
How to register PalmSecure™ 1. Open Workplace Protect. Under Security Devices, click on PalmSecure™. 2. Confirm with Next. 3. Enter your user name and password. Then click OK. (If you haven’t set up a login account yet, please open Control Panel and set up under User Accounts. Start from step 1 after you finished set up) 4. Select left/right hand for which you would like to register and select Enroll. 5. Place your hand 4-6 cm above the sensor. 6. The registration will take several scans to complete. Follow the instruction on screen and adjust your hand position accordingly. PalmSecure™ Set up Guide 8. Click Finish. Now you are ready to login with palm vein in the next reboot. 7. When the recording is correct, a green tick is shown and click Next. How to install Workplace Protect 1. Click Fujitsu BonusApps on your Desktop. Press Windows + F on your keyboard and search Fujitsu BonusApps if you don’t see it. 2. Select Workplace Protect in the list and click install. ***** ***** Copyright© Fujitsu PC Asia Pacific 2015 Website: http://hk.fujitsu.com/pc

Upload: others

Post on 08-Apr-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: PalmSecure Set Up Guide - Fujitsu Set Up Guide.pdfPalmSecure Summa Your system has been configured for authentication with PalmSecure"' You will be able to log on using this method

How to register PalmSecure™ 1. Open Workplace Protect. Under Security Devices,

click on PalmSecure™.

2. Confirm with Next.

3. Enter your user name and password. Then click OK. (If you haven’t set up a login account yet, please open Control Panel and set up under User Accounts. Start from step 1 after you finished set up)

4. Select left/right hand for which you would like to register and select Enroll.

5. Place your hand 4-6 cm above the sensor.

6. The registration will take several scans to complete. Follow the instruction on screen and adjust your hand position accordingly.

PalmSecure™ Set up Guide

8. Click Finish. Now you are ready to login with palm vein in the next reboot.

7. When the recording is correct, a green tick is shown and click Next.

How to install Workplace Protect1. Click Fujitsu BonusApps on your Desktop.

Press Windows + F on your keyboard and search Fujitsu BonusApps if you don’t see it.

2. Select Workplace Protect in the list and click install.

**********

Copyright© Fujitsu PC Asia Pacific 2015 Website: http://hk.fujitsu.com/pc