pager-st800 usermanual pocsag

8/7/2019 Pager-ST800 USERMANUAL POCSAG

1/24


2/24

Congratulations on your purchase of our Pager. By

incorporating some of the most advanced electronic paging

technologies, the is reliable and easy to use. Best of all,

the is affordable and will keep you in touch with those

important to you.

Please carefully read this manual before using your Pager

in order to fully understand the pager's functions and capabilities.Once again, congratulations on your purchase.

ST800


3/24

>>>>>>>>>>>>>>>>>>>

FEATURES

BUTTONS

ICONS AND DESCRIPTIONS

TURNING THE PAGER ON

TURNING THE PAGER OFF

RECEIVING AND READING MESSAGES

READING LOCKED MESSAGES

DUPLICATE MESSAGES

CHANGING THE ALERT STATUS

MEMORY CAPACITY & LOW BATTERY INDICATOR

LOCKING MESSAGES

DELETING INDIVIDUAL MESSAGES

DELETING ALL MESSAGES

SETTING THE ALARM

SETTING THE DATE AND TIMEAUTOMATIC ON / OFF

LIGHT AND BATTERY INFORMATION

CANNED MESSAGES

REMINDER ALERT

4

5

6

7

8

9

1 0

1 1

1 2

1 3

1 4

1 5

1 6

1 7

1 8

1 9

2 0

2 1

2 2

CONTENTS


4/24

FEATURES*

4

Automatic On/Off

Back Lighting

Deletion of All or Individual Messages

In Range Indicator

Low Battery Indicator

Duplicate Message Indicator

Unread Message Indicator

Memory Full Indicator

Reminder Alert

16 Message Memory Capability 9 Locked Messages

8 Different Melodies

5 Different Beeps

Vibrator

Time Stamp

Time/Date

Alarm

*Specifications are subject to change without prior notice


5/24

FUNCTION BUTTONUse to Enter the Menu ModeUse to Turn the Pager On!!

LAMP BUTTON!Use to Exit the Menu Mode!Use to Turn Light On and OffREAD BUTTON

Use to Read MessagesUse to Select Settings and Features

!!

BUTTONS

5


6/24

ICONS AND DESCRIPTIONS

6

: Message Lock

: Duplicate Message

: Pager Off

: Change Battery

: Message Full

: Message Longer than 12Characters

: Reception Area

: Alert (Beep) On

: Alert (Melody) On

: Alert (Vibrator) On

: Alarm On

: Auto Pager Off


7/24

< Stand by Mode >

To Turn the Pager OnPress the Function Button (pg.5) for at least two (2)seconds or longer while the pager is in the OFF mode.The Time and Date should appear on the bottom of the

pager screen.

*After inserting a battery, the pager will briefly vibrate and beep to indicate that it has

entered the normal reception mode.

TURNING THE PAGER ON*

7


8/24

To Turn the Pager OffPress the Function Button (pg.5) for at least two (2) secondsto access the Function Menu. The pager will beep once and"Set Alert?" should appear on the screen. "Set Alert?"should appear on the screen.

Press the Function Button once more and "Power Off?"should appear on the screen. Press the Read Button (pg.5) toturn the pager OFF. " "should appear on the pager in theupper right hand corner of the screen.

TURNING THE PAGER OFF

8


9/24

RECEIVING AND READING MESSAGES

Reading Messages with 13 Characters or

MoreMessages with 13 or more characters will appear togetherwith a symbol on the upper right hand corner of thescreen. Press the Read Button to read the message in it'sentirety.

9

Receiving & Reading MessagesWhen you receive a message, the selected alert will soundoff. Select the Read Button (pg.5) to stop the alert and toread the message(s). The following information will

appear: Message Number, Time Stamp and the Message.The message order will be from newest to oldest.


10/24

Reading Locked MessagesIn order to read a locked message (s), there must be no unreadmessages.

Press the Function Button (pg.5) to enter into the Locked

Message Read Mode. Press the Read Button to display andread all locked messages.

READING LOCKED MESSAGES

10


11/24

Duplicate MessagesThe duplicate message indicator will appear on the pagerscreen when the pager receives a message that isidenticalto a message already in the pager's memory.

11

DUPLICATE MESSAGES


12/24

To Change the Alert StatusPress the Function Button (pg.5) for at least two (2)seconds or longer to access the Function Menu. The

pager will beep once and "Set Alert?"will appear on thepager screen.

Press the Read Button to select the set alert mode. Toscroll through the alert options, press the Function Button.The alerts will appear in the following order: Vibrator, 5Beeps and 8 Melodies.

Press the Read Button to make a selection while thedesired alert is displayed on the pager screen.

CHANGING THE ALERT STATUS

12


13/24

MEMORY CAPACITY & LOW BATTERY INDICATOR

13

Memory CapacityThe has the capacity to hold sixteen (16) numeric messages.

Low Battery IndicatorWhen the battery capacity falls below the operational level, the low battery icon will

appear and the voltage alarm tone will be activated.


14/24

LOCKING MESSAGES

14

To Lock a MessageSelect a message to be locked and then press the FunctionButton (pg.5). When "Lock?" appears on the pagerscreen, press the Read Button. This will lock the messageand the screen will display "Locked".

A maximum of nine (9) messages can be locked at onetime.


15/24

DELETING INDIVIDUAL MESSAGES

To Delete an Individual MessageTo delete unlocked message, press the Function Button(pg.5) twice (2x) while the message is displayed. Whenthe "Delete?"message appears on the pager screen, pressthe Read Button to delete.

To delete a locked message, press the Function Buttonwhile the message is displayed. When the "Delete?"message appears on the pager screen, press the ReadButton to delete. "Deleted" will appear on the pagerscreen once the message has been deleted.

15


16/24

DELETING ALL MESSAGES

16

To Delete all MessagesTo delete all unlocked messages, press the FunctionButton for at least two (2) seconds to access the FunctionMenu. Forward to "Delete All?" by pressing the FunctionButton. Press the Read Button after "Delete All?" appears

on the screen. "General?" will appear, at which time youshould press the Read Button to display "Really?"Confirm the deletion by pressing the Read Button again.

To delete all locked messages, press the Function Buttonfor at least two (2) seconds to access the Function Menu.

Forward to "Delete All?" by pressing the Function Button.Press the Function Button while "Delete All?"is displayed.Press the Read Button to display "Really?" Confirm thedeletion by pressing the Read Button again.


17/24

SETTING THE ALARM

To Set the AlarmPress the Function Button (pg.5) for at least two (2) seconds toaccess the Function Menu. Forward to "Set Alarm?" by

pressing the Function Button. Press the Read Button to selectthe Alarm Mode.

Press the Function Button to toggle between Alarm On and OFF.Press the Read Button while "Alarm On?" is displayed with thetime blinking.

Press the Function Button to change the hour. To move to the

next field, press the Read Button. Press the Function Button tochange the minutes.


18/24

To Set the Date and TimePress the Function Button (pg.5) for at least two (2) seconds toaccess the Function Menu. Forward to "Set Date?"by pressingthe function Button. Press the Read Button to select the SetTime Mode.

Press the Function Button to change the month. To move to thenext field, press the Read Button. Follow the same procedure toset the Time.

SETTING THE DATE AND TIME

18


19/24

AUTOMATIC ON/OFF*

*Factory Default is 1:00 a.m.- 5:00 a.m.

19

To Enable Automatic OnTo enable the Automatic On, press the Function Button for at leasttwo (2) seconds to access the Function Menu. Forward to "AutoOn/Off?"by pressing on the Function Button. Press and releasethe Function Button until "Auto On?" appears then press the Read

Button. Press the Function Button to adjust the hour, using theRead Button to proceed through the fields. Repeat the previousstep to adjust the On and Off time setting. Press the Read Buttonto activate your selection.

To Disable Automatic OnFrom the "Auto On/Off?"screen, press and release the FunctionButton until "Auto Off?" appears. Press the Read Button toactivate your selection.


20/24

LIGHT AND BATTERY INFORMATION

To Turn on the LightPress the lamp button to activate the light.

Battery InformationThe is designed to operate with a AAA size alkaline battery.Do Not UseCarbon Zing Batteries.

20


21/24

CANNED MESSAGES

Canned MessagesThe pager comes with seven (5) pre-programmed messages which are displayedon the pager when the corresponding code is entered.

To Send a Canned MessageDial the pager number on a telephone and wait for a beep sound. Enter the corresponding codefor the desired message.

21


22/24

REMINDER ALERT

22

Following is the list of preprogrammed canned message.

CODE

1

2

3

4

5

Displayed Message

Honey

Friend

Love you

Home

Office

When an unread message exists, the pager gives a periodic reminder alert (every 3 minutes)until all unread messages are read.


23/24


24/24

pager-st800 usermanual pocsag

Documents