pacific helmets f10 mkiii firefighters helmet - product notes

Pacific F10 MkIIIProduct Submission Notes

[email protected]

PACIFIC F10 MkIIIProduct Information

Pacific Helmets (NZ) LtdInternational Enquiries: [email protected] Australian Enquiries: [email protected]

Safety without Compromise www.pacifichelmets.com


[email protected]

F10 MkIII | Overview1.0 PACIFIC

1.1 PACIFIC F10 MKIIIThe Pacfic F10 MkIII offers the very latest in helmet design and technology. The F10 MkIII embodies Pacfics core design philosophies of safety, quality, and comfort, resulting in a structural firefighting helmet that exceeds all others. Design features include internal bubble face shield and unique One-Touch eye protector. Accentuated shell lines provide improved shock absorption and structural rigidity. The Pacific F10 MkIII is the ideal helmet for protection in the most extreme conditions.

1.2 CERTIFICATIONThe F10 MkIII is certified to all major international Standards.

Certificates available on request.

1.3 QUALITY MANAGEMENT SYSTEMPacific Helmets (NZ) Ltd. is an ISO 9001: 2008 certified manufacturer.

MODELSTANDARDS

AS/NZS 4067:2012 EN 443:2008 EN14458:2004

NFPA 1971:2013

NFPA 1951:2013

F10 MkIII Yes Yes (Type B) Yes Yes Yes


[email protected]

F10 MkIII | Key Features2.0 PACIFIC

2.7 KEVLAR & FIBREGLASS REINFORCED COMPOSITE SHELL

Continuous kevlar filaments provide integral strength; the helmet will not tear nor shatter on impact.

Excellent shock impact and penetration protection

20% lighter than thermoplastic Excellent heat resistance Flame retardant Chemical resistant UV resistant smooth high-gloss paint finish Extensive colour selection Superior ear and neck protection

2.1 ACCENTUATED LONGITUDINAL CREST Provides improved top impact protection

2.2 EASI ON/OFF TORCH BASE (PAIR) PHNZ Easi Glide Torch CLip. Stand alone, or

with BA clip combo (2.11) vvExcellent heat resistance Provides 360o torch rotation Patented design

2.3 EXTRUSION Flame retardant Heat resistant

2.4 NECK PROTECTOR Double layer protection Flame retardant (Nomex) Aluminised PBI and Proban material available Multiple customised designs available Moisture barrier available

2.5 CHINSTRAP 3 or 4 point design for excellent retention Flame retardant Nomex/Kevlar webbing Leather cheek comfort pads Easy adjustment for all head sizes Quick Release functionality Heat resistant

2.6 INTERNAL BUBBLE FACE SHIELD Clear flame Retardant Polycarbonate Mirror coated face shield available Anti scratch, anti fog Full face protection High impact and chemically resistant Excellent light transmittance Optically correct Certified to EN 14458:2004


[email protected]

2.0 F10 MkIII | Key Features

Letters Numbers

Symbols Reflective

Logos Badges

2.8 REFLECTIVE TRIM Reflective trim available in various materials Customised designs available High retroreflectivity

2.9 FRONT CREST (OPTIONAL) Metal 3D Badge Available with black or gold (metal appearance) Vinyl crests available under a protective clear coat

2.10 INTERNAL ONE-TOUCH EYE PROTECTOR Clear flame retardant polycarbonate One touch deploy and stow Adjustable wearing height Excellent impact resistance Easily operated with gloved hands Manually operated pull-down version available Anti scratch Excellent light transmittance Optically correct Certified to EN 166:2001

2.11 BA MASK CLIPS (OPTIONAL) Combination BA clip and Torch Base Adjustable for maximum leak tightness Standard models fitted with Torch Base only

2.12 ADDITIONAL CUSTOMISED TRIM

Available under clear coat for increased wear resistance

2.13 LIGHTWEIGHT Weight < 1.5 Kg (configuration dependant)

2.14 REAR HANGER (OPTIONAL)

2.15 LINER Full cranium protection polyurethane liner Superior shock impact absorbtion Excellent thermal barrier Secure click-in 6 point ribbon cradle harness Fully modular harness for easy cleaning/

decontamination and replacement Leather reinforced Mesh crown piece for maximum

comfort and ventilation Merino or Leather Front and Rear comfort pads Height & tilt wearing adjustment Ratchet adjustable sizing: 52 64cm (further size

adjustment kits available)


[email protected]

4.1 SHELLS Covered by 6-year warranty.

4.2 EAR FLAPS/NECK PROTECTORS 1 Year warranty. We recommend they be replaced after a maximum of 50 wash cycles

4.3 FACE SHIELD/EYE PROTECTORS 2-year warranty. Replace once scratched or deformed by heat, smoke or other pollutants.

4.4 COMPONENTS 2-year warranty (except neck protectors)

4.4 GENERAL

STEPS:

All externally manufactured complete accessories shall be covered by the relevant manufacturers warranty. These products are not covered by Pacific Helmets warranty. Copies of the relevant manufacturers warranties are available on request. (I.e. Torches & Radio Communication Sets)

These warranties cover only faulty materials or workmanship and exclude fair wear and tear, of which the Manufacturer (or his agent) shall be the sole arbiter.

Many firefighting, or rescue operations including training or simply careless use can result in damage to the equipment, which is not covered by the warranty.

The above warranty time limits do not imply any form of helmet life expectancy. These time frames simply place reasonable limits on the discovery of faulty materials and allow these to be dealt with.

Reinforced Kevlar composite helmet shells and most other subcomponents can be expected in normal operating circumstances to have a useable life expectancy in excess of 15 years.

It is recommended staff involved in hot fire training should wear their helmets with aluminized hoods over the shells when engaged in these activities.

Use the thumb to push the lower edge of the eye protector upward gently.

A clicking sound can be heard and the eye protector will descend gradually from up position automatically;

To stow, use the thumb again and push the eye protectorback up gently;

Stop pushing when the same clicking sound is heard again. The eye protector is now locked in place.

To adjust eye protector height

3.0 F10 MkIII Supplementary Information

4.0 Warranty Information

5.0 One-Touch Eye Protector

3.1 SPARE PARTS All major components available as spare parts Easily changed without specialist tools Guaranteed supply of spare parts for 10 years

from date of contract

3.2 COLOUR RANGE Pacific Helmets has an extensive range of

shell colours Unique Pantone colours can be matched

on request

Operational Instructions for One-Touch Eye Protector


[email protected]

F10 MkIII | Key Features

The Pacific F10 MkIII is certified to all major international standards. While all the standards have similar requirements, there are some stipulations that are specific to each standard.

STANDARDS AS/NZS 4067:2012 EN 443:2008 NFPA 1971:2013

F10 MkIII YES YES (Type B) YES

SPECIFICATIONS

Kevlar Reinforced Composite Shell S S S

Hi-gloss paint finish S S S

Structural Liner S S S

Suspension system (ribbon/mesh cradle) S S S

Ratchet adjustable headband (52-64cm) S S S

Internal bubble face shield S S S

Internal One-Touch eye protector S S S

3-pt flame retardant chinstrap S S S

Flame retardant neck protector S S S

Reflective trim S P S

Pacific Easi On/Off Base P P P

BA Clips P P P

Crest / Decals P P P

Rear Hanger P P P

S Supplied aS Standard

p available aS an option

PACIFIC

7.0 F10 MkIII Standards | Overview

6.0 Easi On/Off Torch Base

Slide the torch body into the torch sleeve.

Tighten the sleeve screw to secure the torch in place .

Push the boss into the Easi-On-O base tightly.

Fitting Instruction for Torch onto the Helmet.









Slide the torch body onto the sleeve

Tighten the sleeve screw to secure the torch in place

Push the boss into the Easi-On-Off base tightly.

Operational Instructions for Easi On/Off Torch base


[email protected]

Company|Overview8.0

EXPERIENCE With over 30 years experience in the design and manufacture of premium safety helmets, Pacific Helmets (NZ) Ltd specialises in manufacturing and exporting safety helmet products to the exacting design and performance specifications of each customer.

Pacific strives to meet, where possible set, and exceed the highest possible international standards for technical safety performance. Flexible manufacturing processes and innovative design flair result in products which have created new dimensions in helmet safety.

Pacific has an ongoing commitment to the development of new and innovative safety helmets and related products.

EXPERTISE There are three fundamental aspects that drive the design process:

International Standards Practical requirements of fire fighters and rescue personnel Aesthetics and comfort

Pacific prides itself on the ability to provide helmets that are designed around all three criteria above. Over three decades, Pacific has developed an innate understanding of the relevant international standards and the resulting design implications. Pacific also prides itself on understanding the practical requirements of fire fighters and rescue personnel. Our helmets are certified to all major international standards, meet specific user requirements that include comfort, light weight and combine pleasing aesthetics with practicality and safety.

The result is a new model of helmet: the F10 MkIII.

PACIFIC HELMETS NZ LTD


[email protected]

Contact8.0

P.O. Box 866, 315 Heads Road Wanganui 4501, New Zealand

Phone: +64-6-344 5019 Fax: +64-6-344 5376

Email: [email protected] Website: www.pacifichelmets.com

SAFETY WITHOUT COMPROMISE

DISTRIBUTOR CONTACT DETAILS

PACIFIC

pacific helmets f10 mkiii firefighters helmet - product notes

Documents