p1e technical catalogue-uk

Pneumatic cylinders

aerospaceclimate control electromechanicalfiltrationfluid & gas handlinghydraulicspneumaticsprocess controlsealing & shielding

Series P1EAccording to ISO and VDMACylinder diameters 160 and 200 mmCatalogue PDE2580TCUK-ul. May 2009

P1E Cylinders

08.03

www.parker.com/euro_pneumatic

SALE CONDITIONSThe items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered into by Parker will be governed by the provisions stated in Parkers standard terms and conditions of sale (copy available upon request).

WARNING

FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY ANDPROPERTY DAMAGE.This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.

NoteAlltechnicaldatainthiscataloguearetypicaldataonly.Airqualityisessentialformaximumcylinderservicelife(seeISO8573).

ImportantBeforeattemptinganyexternalorinternalworkonthecylinderoranyconnectedcomponents,makesurethecylinderisventedanddisconnecttheairsupplyinordertoensureisolationoftheairsupply.

Features Air Hydraulic Electro cylinder cylinder mechanical actuatorsOverload safe *** *** *

Easy to limit force *** *** *

Easy to vary speed *** *** *

Speed *** ** **

Reliability *** *** ***

Robustness *** *** *

Installation cost *** * **

Ease of service *** ** *

Safety in damp environments *** *** *

Safety in explosive atmospheres *** *** *

Safety risk with electrical installations *** *** *

Risk of oil leak *** * ***

Clean, hygienic *** ** *

Standardised measurements *** *** *

Service life *** *** *

Hydraulic system required *** * ***

Weight ** ** **

Purchase price *** ** *

Power density ** *** *

Noise level during operation ** *** **

High force for size ** *** *

Positioning possibilities * *** ***

Total energy consumption * ** ***

Service interval * ** ***

Compressor capacity required * *** ***

* = good, **=average, ***=excellent

3P1E Cylinders

08.03


Contents PageP1ESeries,general.......................................................................................4Cylinderforces...............................................................................................6Maindata........................................................................................................6Materialspecification.....................................................................................6Workingmedium,airquality..........................................................................6Cushioningcharacteristics.............................................................................6Orderkey........................................................................................................7Strokelength..................................................................................................7Ordercodestandardstrokesdouble-actingP1E-T.......................................7Guideforselectingsuitabletubing................................................................8Dimensions...................................................................................................10Cylindermountings.................................................................................11-13Sensors...................................................................................................14-16Connectingcableswithoneconnector........................................................17Maleconnectorsforconnectingcables.......................................................17Readytouseconnectingcableswithconnectorsateachend...................17ConnectionblockValvetronic110................................................................18Repairkits.....................................................................................................19GreaseforP1E.............................................................................................19

4P1E Cylinders

08.03


ISO Cylinders P1ETheP1ESeriesofI.S.O.cylindersareprecisionmadetothemostexactingstandardstoprovidethefinestpneumaticcylindersavailablewiththewidestchoiceofoptions.

Installation dimensions according to international ISO/VDMA standardsThenewP1EcomplieswiththecurrentISO6431,ISO1555,VDMA456andAFNORinstallationdimensionstandards.Forcustomerreassuranceworld-wide.

High qualityAswithourotherproducts,theP1Ehasbeendevelopedwithqualityinallaspectsspecification,design,plan-ning,purchasing,production,distributionandservice.WehavebeencertifiedundertheISO9001QAstandardsince199.Qualityinallourproductsandservicesisourprimeaim.

Adaptability for use with electronicsP1ECylindersareequippedasstandardwithmagneticpistonsforpositionsensing.Afullrangeofsensorsenablesthecylinderstobeintegratedintothemostadvancedautomationsystems.Thesensorscanbefittedatanypositionalongthecylinderstroke.

DesignInthedevelopmentofP1Ecylinders,greatemphasiswasplacedontheimportanceoflongservicelife,andoperationwithunlubricatedair,characteristicsessentialforapplicationsindemandingenvironments.

Long service lifeProvensealingsystemsandpre-lubricatedbearings,togetherwithsurfacesmoothnessandprecisetoler-ancesinallconstituentparts,providelong,safeandreliableservicelife.

Acetal wear strip on piston aids smooth operation. A magnetic strip is housed within the wear strip as standard.

High fibre nitrile piston rod seal and poly-urethane wiper ring.

Combined cushion/ non return seal for fast breakaway speed of the piston.

Anodised aluminium cylinder bore for high strength and low weight

Die cast aluminium end plates.

Retained cushion adjusting screw allows a high degree of cushion control and will not blow out during adjustment.

Stainless steel piston rod as standard.

Spigots on front and rear plates ensures precise location of mounting.

Oil retaining bronze bearing ensures extreme piston rod accuracy.

Extra long acetal cushion sleeves for improved life and long cushion length.

Polyurethane piston seals prelubricated for outstanding non-lube operation.

5P1E Cylinders

08.03


Effective cushioningAlongcushioningzoneandsimple,adjustablecushionscrewfacilitatesfineadjustmentandpermitsalargemass,highvelocityandshortcycletime.

Anodised cylinder barrelThebasicP1ESeriescylinderfeaturesanodisedcylindertubesasstandardandareprelubricatedonassembly.Thecylinderborefinishandsealqualityaresuchthatinmostapplicationstheycanoperatewithoutlubricationforthenormalservicelifeofapneumaticcylinder.

High temperature cylindersForhightemperatureapplications,wecanoffercylinderswithhighqualityfluorocarbonrubbersealsandP.T.F.E.wearstrips.

Magnetic cylindersAvailableforusewithelectronicorreedsensors,themagneticversionsfeatureanencapsulatedpolymermagnet.Thisprotectsthemagnetfromwearandmaintainslowfriction.

VariantsInadditiontothebasicversions,anumberofspecialvariantsoftheParkerP1Ecylindersareavailable.Thespecialvariantsaredesignedtomeetthemostexactingdemands.Theavail-ableoptionsinclude:

Non-standardstrokelengths Choiceoftwodifferentpiston-rodmaterials Extendedpistonrods Throughpistonrod Hightemperaturecylinderversionsforuseinambient

temperaturesupto+180C Factoryfittedmountings

Complete range of mountingsAcompleterangeofsurface-treatedmountingsaccordingtoISO,VDMAandAFNORareavailableasaccessories.

6P1E Cylinders

08.03


Cylinder forces, double acting variantsCyl. bore/ Stroke Pistonarea Max theoretical force in N (bar) pist. rod mm cm 2 1,0 2,0 3,0 4,0 5,0 6,0 7,0 8,0 9,0 10,0160/40 + 01,1 011 401 603 804 10053 12064 14074 16085 18096 0106 - 188,5 1885 3770 5655 5740 945 11310 13195 15080 16965 18850200/40 + 314, 314 683 945 1566 15708 18850 1991 5133 874 31416 - 301,6 3016 603 9048 1064 15080 18096 111 417 7043 30159

Main data: P1ECylinder Cylinder Pistonrod Totalmass Massmovingparts Aircon- Conn.beteckning bore area dia. area thread at0mm Supplement at0mm Supplement sump- thread stroke per10mm stroke per10mm tion stroke stroke mm cm mm cm kg kg kg kg litre

P1E-T160 160 01,1 40 1,6 M36x 11,71 0,8 11,71 0,8 ,8141) G3/4P1E-T00 200 314, 40 1,6 M36x 15,45 0,5 15,45 0,5 4,3961) G3/4

1)Freeairconsumptionper10mmstrokeforadoublestrokeat6bar

Material specificationPistonrod Stainlesssteel,X10CrNiS189Pistonrodseal PolyurethanePistonrodbearing OilRetainingBronzeEndcover BlackanodisedaluminiumTieRods ZincPlatedSteelTieRodNuts ZincPlatedSteelO-ring,internal Nitrilerubber,NBRCylinderbarrel HardanodisedaluminiumPiston AluminiumPistonseal PolyurethanePistonbearing PolyurethaneMagneticring Plasticboundmagneticmaterial

Variants:High-temperature version, type F:Pistonrodseal Fluorocarbonrubber,FPMPistonseal Fluorocarbonrubber,FPMO-rings Fluorocarbonrubber,FPM

Operation data Workingpressure Max10barWorkingtemperature max+70C min10C

Hightempversion max+180C min0C

Greasedforlife,doesnotnormallyneedadditionallubrication.Ifextralubricationisgiven,thismustalwaysbecontinued.

Cushioning characteristicsThediagrambelowisusedfordimensioningofcylindersre-latedtothecushioningcapacity.Themaximumcushioningcapacityshowninthediagramassumesthefollowing:Lowload,i.e.lowpressuredropacrossthepistonEquilibriumspeedCorrectlyadjustedcushioningscrew6baratcylinderport

Theloadisthesumofinternalandexternalfriction,plusanygravitationalforces.Athighrelativeload(pressuredropexcee-ding1bar),werecommendthatforanygivenspeed,themassshouldbereducedbyafactorof.5,orforagivenmass,thespeedshouldbereducedbyafactorof1.5.Thisisinrelationtothemaximumperformancegiveninthediagram

Speed[m/s]

Mass[kg]

Note!Selectatheoreticalforce50-100%largerthantheforcerequired

+ =Outwardstroke- = Returnstroke

Working medium, air quality Workingmedium Dry,filteredcompressedair toISO8573-1class3.4.3.

Recommended air quality for cylinders Forbestpossibleservicelifeandtrouble-freeoperation,ISO8573-1qualityclass3.4.3shouldbeused.Thismeans5mfilter(standardfilter)dewpoint+3Cforindooroperation(alowerdewpointshouldbeselectedforoutdooroperation)andoilconcentration1.0mgoil/m3,whichiswhatastandardcompressorwithastandardfiltergives.

ISO 8573-1 quality classes

Quality Pollution Water Oil class particle max con- max. press. max con- size centration dew point centration (m) (mg/m) (C) (mg/m) 1 0,1 0,1 -70 0,01 2 1 1 -40 0,1 3 5 5 -0 1,0 4 15 8 +3 5,0 5 40 10 +7 5 6 - - +10 -

1,0

0,50,40,3

0,2

0,1100 200 300 500 1000 2000 4000

160

200

7P1E Cylinders

08.03


Order key

P 1 E - T 1 6 0 M S - 0 2 5 0

F

Cylinder version

T Tierod

D Centretrunnion,tierod

Cylinder bore mm

160

200

Cylinder type/function

M Doubleactingcushioned

Doubleacting,throughrod cushioned

Sealing material

S Standardseals, magneticpiston

A Standardseals, nonmagneticpiston

F Hightemperatureseals, nonmagneticpiston

Stroke length

0025

0050

0080

0100

0125

0160

0200

0250

0320

Standard stroke length in mm

Stroke lengthStandardstrokelengthsinmmaccordingtoISO4393.Specialstrokelengthsupto700mm

Cylinder Cylinder Standard stroke length in mm Non standard stroke lengthdesignation bore 5 50 80 100 15 160 00 50 30

Double actingP1E-T160MS-xxxx 160 P1E-T00MS-xxxx 00

Double-acting P1E-TPiston rod 40 mm, thread M36x2Cyl.bore Stroke Weight Order codemm mm kg

160 5 1,8 P1E-T160MS-0025 Conn.G3/4 50 1,85 P1E-T160MS-0050 80 13,53 P1E-T160MS-0080 100 13,99 P1E-T160MS-0100 15 14,56 P1E-T160MS-0125 160 15,36 P1E-T160MS-0160 00 16,7 P1E-T160MS-0200 50 17,41 P1E-T160MS-0250 30 19,01 P1E-T160MS-0320 200 5 16,08 P1E-T200MS-0025 Conn.G3/4 50 16,71 P1E-T200MS-0050 80 17,47 P1E-T200MS-0080 100 17,97 P1E-T200MS-0100 15 18,60 P1E-T200MS-0125 160 19,48 P1E-T200MS-0160 00 0,49 P1E-T200MS-0200 50 1,75 P1E-T200MS-0250 30 3,51 P1E-T200MS-0320Non-standardstrokelengthsonrequest

8P1E Cylinders

08.03


Guide for selecting suitable tubingTheselectionofthecorrectsizeoftubingisoftenbasedonexperience,withnogreatthoughttooptimizingenergyeffi-ciencyandcylindervelocity.Thisisusuallyacceptable,butmakingaroughcalculationcanresultinworthwhileeconomicgains.

The following is the basic principle:1.Theprimarylinetotheworkingvalvecouldbeoversized(thisdoesnotcauseanyextraairconsumptionandconse-quentlydoesnotcreateanyextracostsinoperation).

.Thetubesbetweenthevalveandthecylindershould,however,beoptimizedaccordingtotheprinciplethataninsufficientborethrottlestheflowandthuslimitsthecylin-derspeed,whileanoversizedpipecreatesadeadvolumewhichincreasestheairconsumptionandfillingtime.

Thechartbelowisintendedtohelpwhenselectingthecorrectsizeoftubetousebetweenthevalveandthecylinder.

The following prerequisites apply:Thecylinder load should be about 50%ofthetheoreticalforce(=normalload).Alowerloadgivesahighervelocityandviceversa.Thetubesizeisselectedasafunctionofthecylinder bore,thedesiredcylinder velocityandthetube lengthbetweenthevalveandthecylinder.Ifyouwanttousethecapacityofthevalvetoitsmaximum,

andobtainmaximumspeed,thetubingshouldbechosensothattheyatleastcorrespondwiththeequivalentrestric-tiondiameter(seedescriptionbelow),sothatthetubingdoesnotrestrictthetotalflow.Thismeansthatashorttubingmusthaveatleasttheequivalentrestrictiondiameter.Ifthetubingislonger,chooseitfromthetablebelow.Straightfittingsshouldbechosenforhighestflowrates.(Elbowandbanjofittingscauserestriction.)

1) Theequivalentthrottlingboreisalongthrottle(forexampleatube)oraseriesofthrottles(forexample,throughavalve)convertedtoashortthrottlewhichgivesacorrespondingflowrate.Thisshouldnotbeconfusedwiththeorificewhichissometimesspecifiedforvalves.Thevaluefortheorificedoesnotnormallytakeaccountofthefactthatthevalvecontainsanumberofthrottles.

) Qnisameasureofthevalveflowcapacity,withflowmeasuredinlitreperminute(l/min)at6bar(e)supplypressureand1barpressuredropacrossthevalve.

Cylinder[mm]

Equivalentthrottlingbore1) TubeOut./Int.[mm]

Lengthoftubing[m]Cylinderspeed[m/s]0,2 0,5 0,8 1,1 1,4 0 1 2 3 4 5 6 7 8 9 10

1

2

3

4

5

6

7

8

9

10

11

10162025324050

63

80

100

125

160

200

14/11/12

/13

/14

/15

/16

12/10

10/8

8/6

6/45/34/2,7

200

400

800

1000

1200140016001800200022002400

3000

4000

2800

3200340036003800

2600

4

3

2

1

AirflowQn[Nl/min]

9P1E Cylinders

08.03


Example 1 : Which tube diameter should be used?A50mmborecylinderistobeoperatedat0.5m/s.Thetubelengthbetweenthevalveandcylinderism.Inthediagramwefollowthelinefrom50mmboreto0.5m/sandgetanequi-valentthrottlingboreofapproximately4mm.Wecontinueouttotherightinthechartandintersectthelineforamtubebet-weenthecurvesfor4mm(6/4tube)and6mm(8/6tube).Thismeansthata6/4tubethrottlesthevelocitysomewhat,whilean8/6tubeisalittletoolarge.Weselectthe8/6tubetoobtainfullcylindervelocity.

Example 2 : What cylinder velocity will be obtained?A80mmborecylinderwillbeused,connectedby8m1/10tubetoaPL-Bvalve.Whatcylindervelocitywillweget?Werefertothediagramandfollowthelinefrom8mmtubelengthuptothecurvefor1/10tube.Fromthere,wegohorizontallytothecurveforthe80cylinder.Wefindthatthevelocitywillbeabout0.5m/s.

Example 3 : What is the minimum inner diameter and maximum lenght of tube?Foraapplicationa15mmborecylinderwillbeused.Maxi-mumvelocityofpistonrodis0.5m/s.Thecylinderwillbecon-trolledbyaPL-Dvalve.Whatdiameteroftubecanbeusedandwhatismaximumlenghtoftube.Werefertothediagram.Westartattheleftsideofthediagramcylinder15.Wefollowthelineuntiltheintersectionwiththevelocitylineof0.5m/s.Fromherewedrawahorizontallineinthediagram.Thislineshowsusweneedanequivalentthrott-lingboreofapproximately10mm.Followingthislinehorizon-tallywecrossafewintersections.Theseintersectionsshowsustheminimuminnerdiameter(rightsidediagram)incombina-tionwiththemaximumlengthoftube(bottomsidediagram).

Forexample:Intersectionone:Whenatube(14/11)willbeused,themaximumlengthoftubeis0.7meter.Intersectiontwo:Whenatube(/13)willbeused,themaximumlengthoftubeis3.7meter.Intersectionthree:Whenatube(/14)willbeused,themaximumlengthoftubeis6meter.

Example 4 : Determining tube size and cylinder ve-locity with a particular cylinder and valve?Foranapplicationusinga40mmborecylinderwithavalvewithQn=800Nl/min.Thedistancebetweenthecylinderandvalvehasbeensetto5m.Tube dimension: Whattubeboreshouldbeselectedtoobtainthemaximumcylindervelocity?Startatpipelength5m,followthelineuptotheintersectionwith800Nl/min.Selectthenextlargesttubediameter,inthiscase10/8mm.Cylinder velocity:Whatmaximumcylindervelocitywillbeobtained?Followthelinefor800Nl/mintotheleftuntilitinter-sectswiththelineforthe40mmcylinder.Inthisexample,thespeedisjustabove1.1m/s.

Valve series with respective flows in Nl/minuteValve series Qn in Nl/Min

ValvetronicSolstar 33InterfacePS1 100AdexA05 173Moduflexsize1,(x3/) 0ValvetronicPVL-B5/3closedcentre,6mmpushin 90Moduflexsize1,(4/) 30B43Manualandmechanical 340ValvetronicPVL-Bx/3,6mmpushin 350ValvetronicPVL-B5/3closedcentre,G1/8 370CompactIsomaxDX0 385ValvetronicPVL-Bx3/G1/8 440ValvetronicPVL-B5/,6mmpushin 450ValvetronicPVL-B5/3ventedcentre,6mmpushin 450Moduflexsize,(x3/) 450FlowstarPV-A 50ValvetronicPVL-B5/3ventedcentre,G1/8 540ValvetronicPVL-B5/,G1/8 540ValvetronicPVL-Cx3/,8mmpushin 540AdexA1 560ValvetronicPVL-Cx3/G1/8 570CompactIsomaxDX01 585VIKINGXtremePLAX 660ValvetronicPVL-C5/3closedcentre,8mmpushin 700ValvetronicPVL-C5/3ventedcentre,G1/4 700B3-Series 780ValvetronicPVL-C5/3closedcentre,G1/4 780Moduflexsize,(4/) 800ValvetronicPVL-C5/,8mmpushin 840ValvetronicPVL-C5/3ventedcentre,8mmpushin 840ValvetronicPVL-C5/,G1/4 840FlowstarPV-B 1090ISOMAXDX1 1150B53Manualandmechanical 1160B4-Series 1170VIKINGXtremePLBX 190B5-Series,G1/4 1440AirlineIsolatorValveVE/3 1470ISOMAXDX 330VIKINGXtremePLCX,G3/8 460VIKINGXtremePLDX,G1/ 660ISOMAXDX3 4050AirlineIsolatorValveVE4/43 550AirlineIsolatorValveVE8/83 13680

10

P1E Cylinders

08.03


Cyl.bore MM KK* AM* B WH VD VE ZJ VA PJ X Y KV3 KWmm +0/- e11 A/F

160 40 M36x 7 65 80 7 5 60 5 13 0 104 55 18

00 40 M36x 7 75 95 7 60 75 5 13 0 119 55 18

Cyl.bore EE DD KV1 BG KV KW E TG ZMmm A/F min A/F

160 G3/4 M16 30 4 36 16 179 140 340

00 G3/4 M16 30 4 36 16 16 175 370

Dimensions

*AccordingtoISO6431

AM WH

KW

AM

EE VA

B

X

BGVE

AM

VDWH

YKW2

KV2

B

MM

KK

DDKV3

E

TG

E TG KV1

ZM+stroke

PJ+stroke

ZJ+stroke

11

P1E Mountings

08.03


Flange MF1/MF2 Intendedforfixedmountingofcylinder.Flangecanbefittedtofrontorrearendcoverofcylinder.MaterialsFlange:Surface-treatedsteel,blackMountingscrewsacc.toDIN691:Zinc-platedsteel8.8Suppliedcompletewithmountingscrewsforattachmenttocylinder.

AccordingtoISOMF1/MF,VDMA456,AFNOR

Cyl. d1 FB TG1 E R MF TF UF W ZFbore H11 H13 JS14 JS14 JS14mm mm mm mm mm mm mm mm mm mm mm

160 65 18 140 190 115 0 30 75 60 8000 75 175 5 135 5 70 318 70 300

S=Strokelength

Foot bracket MS1 Intendedforfixedmountingofcylinder.Footbracketcanbefittedtofrontandrearendcoversofcylinder.MaterialsFootbracket:Surface-treatedsteel,blackMountingscrewsacc.toDIN91:Zinc-platedsteel8.8Suppliedinpairswithmountingscrewsforattachmenttocylinder.

AccordingtoISOMS1,VDMA456,AFNOR

Cyl. AB TG1 E TR AO AU AH l7 AT SAbore H14 JS14 JS15mm mm mm mm mm mm mm mm mm mm mm

160 18 140 177 115 4 60 115 - 4,75 30000 175 14 135 30 70 135 - 8 30

S=Strokelengthd

Clevis bracket MP2 Intendedforflexiblemountingofcylinder.ClevisbracketMPcanbecombinedwithclevisbracketMP4.MaterialsClevisbracket:Surface-treatedaluminium,blackPin:SurfacehardenedsteelCirclipsaccordingtoDIN471:SpringsteelMountingscrewsacc.toDIN91:Zinc-platedsteel8.8Suppliedcompletewithmountingscrewsforattachmenttocylinder.

AccordingtoISOMP,VDMA456,AFNOR

Cyl. E UB CB FL L CD MR XDbore h14 H14 0, H9mm mm mm mm mm mm mm mm mm

160 177 170 90 55 35 30 30 31500 14 170 90 60 36 30 30 335S=Strokelength

160 6,00 P1C-4SMB00 8,00 P1C-4TMB

160 1,60 P1C-4SMF00 4,40 P1C-4TMF**Weightperitem

160 3,90 P1C-4SMT00 6,80 P1C-4TMT

Cylinder mountingsType Description Cyl.bore Weight Ordercode mm kg

1

P1E Mountings

08.03


Clevis bracket MP4 Intendedforflexiblemountingofcylinder.ClevisbracketMP4canbecombinedwithclevisbracketMP.MaterialsClevisbracket:Surface-treatedaluminium,blackMountingscrewsacc.toDIN91:Zinc-platedsteel8.8Suppliedcompletewithmountingscrewsforattachmenttocylinder.

AccordingtoISOMP4,VDMA456,AFNOR

Cyl. E EW FL L CD MR XDbore 0, H9mm mm mm mm mm mm mm mm

160 177 90 55 35 30 30 31500 14 90 60 35 30 30 335S=Strokelength

Pivot bracket for MT4 IntendedforusetogetherwithcentraltrunnionMT4.MaterialPivotbracket:Surface-treatedaluminiumBearingacc.toDIN1850C:Sinteredoil-bronzebushingSuppliedinpairs.

AccordingtoISO,VDMA456,AFNOR

Cyl. B1 B A C d1 d H1 H fx45lbore H13 minmm mm mm mm mm mm mm mm mm mm

160 9 40 60 ,5 3 18,0 60 30 ,500 9 40 60 ,5 3 18,0 60 30 ,5

Centre trunnion MT4 Intendedforarticulatedmountingofcylinder.Thetrunnionisfactory-fittedinthecentreofthecylinderoratanoptio-nallocationspecifiedbytheXV-measureseetheordercodekeyonpage7.CombinedwithpivotbracketforMT4.Material:Trunnion:zincplatedsteelTrunnion centred ThecentraltrunnionisorderedwithletterDinposition.Seetheordercodekeyatpages7.Trunnion with optional locationPleasecontactcustomerserviceforotherXVdimensions

AccordingtoISOMT4,VDMA456,AFNOR

Cyl. TM TL TD R UW L1 X1* XV*minX*bore h14 h14 e9mm mm mm mm mm mm mm mm mm mm

160 00 3 3 ,5 190 70 170 169 17000 50 3 3 ,5 4 70 185 184 186XVstd=X1+Strokelength/,XVmax=X+Strokelength

160 3,00 P1C-4SME00 6,0 P1C-4TME

160 6,46 930105426800 9,0 9301054268

d

H

BA

2

1

H 1

1d2C

fx45

B2

TL

UW

TM

TD

TL

R

XVstd

L1LL

XVmin

XVmax

160 XX See order00 XX key on page 7


13

P1E Mountings

08.03


Swivel rod eye Swivelrodeyeforarticulatedmountingofcylinder.SwivelrodeyecanbecombinedwithclevisbracketGA.Maintenance-free.MaterialsSwivelrodeye:Zinc-platedsteelSwivelbearingaccordingtoDIN648K:Hardenedsteel

AccordingtoISO8139

Cyl. A B B CE CN EN ER KK LE N O Zbore min max H9 h1 minmm mm mm mm mm mm mm mm mm mm mm mm

160 56 139 161 15 35 43 40 M36x 41 14 8 1500 56 139 161 15 35 43 40 M36x 41 14 8 15

Clevis Clevisforarticulatedmountingofcylinder.MaterialClevis,clip:GalvanizedsteelPin:Hardenedsteel

AccordingtoISO8140

Cyl. A B B CE CK CL CM ER KK LE Obore min max h11/E9mm mm mm mm mm mm mm mm mm mm mm

160 7 158 180 144 35 70 35 50 M36x 7 8300 7 158 180 144 35 70 35 50 M36x 7 83

Nut Intendedforfixedmountingofaccessoriestothepistonrod.Material:Zinc-platedsteelThecylindersaredelivredwithazinc-platedsteelpistonrodnut

AccordingtoDIN439B

Cyl. d M Sboremm mm mm

160 M36x 18 5500 M36x 18 55

160 ,00 P1C-4SRS00 ,00 P1C-4SRS

160 4,30 P1C-4SRC00 4,30 P1C-4SRC

160 0,110 912898560600 0,110 9128985606

S M

d

CK

B

ER

CELEA

CLCM O

KKM

CN

B

N

Z

ACE

LE

O

KK

EN

ER

ZM


14

P1E Sensors

08.03


New drop-in sensors Thecompletelynewdrop-insensorscaneasilybeinstalledfromthesideinthesensorgroove,atanypositionalongthepistonstroke.Thesensorsarecompletelyrecessedandthusmechanicallyprotected.Choosebetweenelectronicorreedsensorsandseveralcablelengthsand8mmandM1con-nectors.Thereisadoublejointedadapterforthetie-rodver-sion,whichofferssimpleandflexibleuseofstandardsensors.

Electronic sensors ThenewelectronicsensorsareSolidState,i.e.theyhavenomovingpartsatall.Theyareprovidedwithshort-circuitpro-tectionandtransientprotectionasstandard.Thebuilt-inelec-tronicsmakethesensorssuitableforapplicationswithhighonandoffswitchingfrequency,andwhereverylongservicelifeisrequired.

Technical dataDesign GMR(GiantMagneticResistance) magneto-resistivefunctionInstallation Fromside,downintothesensor groove,so-calleddrop-inOutputs PNP,normallyopen(alsoavailablein NPNdesign,normallyclosed, onrequest)Voltagerange 10-30VDC 10-18VDC,ATEXsensorRipple max10%Voltagedrop max,5VLoadcurrent max100mAInternalconsumption max10mAActuatingdistance min9mmHysteresis max1,5mmRepeatabilityaccuracy max0,mmOn/offswitchingfrequency max5kHzOnswitchingtime maxmsOffswitchingtime maxmsEncapsulation IP67(EN6059)Temperaturerange 5Cto+75C 0Cto+45C,ATEXsensorIndication LED,yellowMaterialhousing PA1Materialscrew StainlesssteelCable PVCorPUR3x0.5mm

seeordercoderespectively

Reed sensors Thesensorsarebasedonprovenreedswitches,whichofferreliablefunctioninmanyapplications.Simpleinstallation,aprotectedpositiononthecylinderandclearLEDindicationareimportantadvantagesofthisrangeofsensors.

Technical dataDesign ReedelementMounting Fromside,downintothesensor groove,so-calleddrop-inOutput Normallyopen,ornormallyclosedVoltagerange 10-30VAC/DCor 10-10VAC/DC 4-30VAC/DCLoadcurrent max500mAfor10-30Vor max100mAfor10-10V max30mAfor4-30VBreakingpower(resistive) max6W/VAActuatingdistance min9mmHysteresis max1,5mmRepeatabilityaccuracy 0,mmOn/offswitchingfrequency max400HzOnswitchingtime max1,5msOffswitchingtime max0,5msEncapsulation IP67(EN6059)Temperaturerange 5Cto+75CIndication LED,yellowMaterialhousing PA1Materialscrew StainlesssteelCable PVCorPUR3x0.14mm

seeordercoderespectively

15

P1E Sensors

08.03


Sensors Adapter

3515,7 A

B

Cyl.bore A Bmm mm mm160 95 9000 11 107

31,5

37

M8x

1M

8x1

4,3

6,1

4,6

9,7

31,5 - 36

1

4

3DC

Brown

Black

Blue

1

4

3AC/DC

14

3+()VAC/DC

Signal

(+)VAC/DC

Brown

Black

Blue

AC/DC

Brown

Blue

P8S-GRFLX / P8S-GRFLX2

143+()VAC/DC

Signal(+)VAC/DC

M8 M12

14

3+VDC

Signal

VDC143+VDC

SignalVDC

M8 M12

Electronic sensors Reed sensors

AC/DC

P8S-GCFPXBrown

Blue

Dimensions

16

P1E Sensors

08.03


Ordering dataOutput/function Cable/connector Weight Order code kgElectronic sensors , 10-30 V DCPNPtype,normallyopen 0,7mPUR-cableand8mmsnap-inmaleconnector 0,007 P8S-GPSHXPNPtype,normallyopen 1,0mPUR-cableand8mmsnap-inmaleconnector 0,013 P8S-GPSCXPNPtype,normallyopen 1,0mPUR-cableandM8screwmaleconnector 0,013 P8S-GPCCXPNPtype,normallyopen 0,7mPUR-cableandM1screwmaleconnector 0,015 P8S-GPMHXPNPtype,normallyopen 3mPVC-cablewithoutconnector 0,030 P8S-GPFLXPNPtype,normallyopen 10mPVC-cablewithoutconnector 0,110 P8S-GPFTXElectronic sensor 18-30 V DC ATEX-certified

See ATEX information in P1D catalogue

TypePNP,normallyopen 3mPVC-cablewithoutconnector 0,030 P8S-GPFLX/EX

Reed sensors , 10-30 V AC/DCNormallyopen 0,7mPUR-cableand8mmsnap-inmaleconnector 0,007 P8S-GSSHXNormallyopen 1,0mPUR-cableand8mmsnap-inmaleconnector 0,013 P8S-GSSCXNormallyopen 1,0mPUR-cableandM8maleconnector 0,013 P8S-GSCCXNormallyopen 0,7mPUR-cableandM1screwmaleconnector 0,015 P8S-GSMHXNormallyopen 1,0mPUR-cableandM1screwmaleconnector 0,03 P8S-GSMCXNormallyopen 3mPVC-cablewithoutconnector 0,030 P8S-GSFLXNormallyopen 10mPVC-cablewithoutconnector 0,110 P8S-GSFTXNormallyclosed 5mPVC-cablewithoutconnector1) 0,050 P8S-GCFPX

Reed sensors, 10-120 V AC/DCNormallyopen 3mPVC-cablewithoutconnector 0,030 P8S-GRFLXReed sensorer, 24-230 V AC/DCNormallyopen 3mPVC-cablewithoutconnector 0,030 P8S-GRFLX21)WithoutLED

Adapter for tie-rod design

Description Weight Order code kgDoublejointedadapter 0,07 P8S-TMA0X

II3G EEx nA II T4X II3D 135 C IP67

17

P1E Sensors

08.03


Asaccessoriesthesystemcomprisesalargenumberofdifferentca-blesinordertomeetallrequirementsthatmayariseandtomaketheinstallationsimple,fastandreliable.Cableswithmoulded8mmsnap-inroundcontactsinbothends.Thecablesareavailableintwotypes,onewithastraightmaleandfemaleconnectorsrespectively,andonewithastraight3-polemaleconnectorinoneendandanangled3-polefemaleconnectorintheotherend.

Technical dataContactsMoulded8mmsnap-inmale/femalecontacts.Enclosure IP67

CableConductor 3x0,5mm(3x0,10mm)Sheath PVC/PURColour Black

Designation Weight Order code kg

Cablewithstraightcontacts,0,m 0,0 9121717014Cablewithstraightcontacts,0,3m 0,0 9121717015Cablewithstraightcontacts,0,5m 0,03 9121717016Cablewithstraightcontacts,1,0m 0,03 9121717017Cablewithstraightcontacts,,0m 0,05 9121717018Cablewithstraightcontacts,3,0m 0,07 9121717019Cablewithstraightcontacts,5,0m 0,1 9121717020Cablewithstraightcontacts,10m 0,3 9121717021

Designation Weight Order code kg

Cablewithstraightandangledconnectors,0,m0,0 9121717022Cablewithstraightandangledconnectors,0,3m0,0 9121717023Cablewithstraightandangledconnectors,0,5m0,03 9121717024Cablewithstraightandangledconnectors,1,0m0,03 9121717025Cablewithstraightandangledconnectors,,0m0,05 9121717026Cablewithstraightandangledconnectors,3,0m0,07 9121717027Cablewithstraightandangledconnectors,5,0m0,1 9121717028Cablewithstraightandangledconnectors,10m 0,3 9121717029

Type of cable Cable/connector Weight Order code kgCables for sensors, complete with one female connectorCable,FlexPVC 3m,8mmSnap-inconnector 0,07 9126344341Cable,FlexPVC 10m,8mmSnap-inconnector 0,1 9126344342Cable,SuperFlexPVC 3m,8mmSnap-inconnector 0,07 9126344343Cable,SuperFlexPVC 10m,8mmSnap-inconnector 0,1 9126344344Cable,Polyurethane 3m,8mmSnap-inconnector 0,01 9126344345Cable,Polyurethane 10m,8mmSnap-inconnector 0,0 9126344346Cable,Polyurethane 5m,M1screwconnector 0,07 9126344348Cable,Polyurethane 10m,M1screwconnector 0,0 9126344349

Male connectors for connecting cablesCableconnectorsforproducingyourownconnectingcables.Theconnectorscanbequicklyattachedtothecablewithoutspecialtools.Onlytheoutersheathofthecableisremoved.TheconnectorsareavailableforM8andM1screwconnectorsandmeetprotectionclassIP65.

Connector Weight Order code kgM8screwconnector 0,017 P8CS0803JM1screwconnector 0,0 P8CS1204J

Connecting cables with one connectorThecableshaveanintegralsnap-infemaleconnector.

Cableswithstraight3-polemaleandfemaleconnectorsrespectively. Cableswithastraight3-polemaleconnectorinoneendandanang-led3-polefemaleconnectorintheotherend.

Ready to use connecting cables with connectors at each end

18

P1E Sensors

08.03


Connection block Valvetronic 110TheValvetronic110isaconnectionblockthatcanbeusedforcollectingsignalsfromsensorsatvariouspointsonamachineandconnectingthemtothecontrolsystemviaamulticorecable.Valvetronic110canalsobeusedforcentralconnectionofthemulti-corecabletotheoutputsofacontrolsystem,andcanbelaidtoamachinewheretheoutputsignalscanbeconnected.Theconnectionblockhasten8mmsnap-incircularconnectorsandamulti-corecablewhichisavailableinlengthsof3or10m.Theconnectionsontheblockarenumberedfrom1to10.Blan-kingplugsareavailableforunusedconnections,aslabelsformarkingtheconnectionsofeachblock.

18,7

12,5 8

25 12

9,2 20,5

L

30,5

8575

M3

6 7 8 9 10

1 2 3 4 5

3 3 3 3 3

2 2 2 2 2

1 1 1 1 1

3 3 3 3 3

2 2 2 2 2

1 1 1 1 1

A

5 4

3 2

1

67

89

10B

Technical dataConnections:Ten3-polenumbered8mmroundsnap-infemalecontacts Inputblock Pin1 Common,+4VDC Pin Inputsignal Pin3 Common,0V

Outputblock Pin1 Common,GND Pin Outputsignal Pin3 Common,0V

Electrical data:Voltage 4VDC(max.60VAC/75VDC)Insulationgroup accordingtoDIN0110classCLoad max.1Aperconnection totalmax.3A

Cable:Length 3mor10mTypeofcable LifYY11YConductor 1Area 0.34mmColourmarking AccordingtoDIN47100

32

1

32

1

Mechanical dataEnclosure IP67,DIN40050withfittedcontactsand/or blankingplugs.Temperature 0Cto+70C

MaterialBody PA6,6VDaccordingtoUL94Contactholder PBTPSnap-inring LDPEMouldingmass EpoxySeal NBRScrews Platedsteel

Industrial durabilityGoodchemicalandoilresistance.Testsshouldbeperformedinaggressiveenvironments.

Ordering data Designation Weight Order code kg ConnectionblockValvetronic110with3mcable 0,3 9121719001 ConnectionblockValvetronic110with10mcable 0,95 9121719002

Blankingplugs(packof10) 0,0 9121719003 Useblankingplugstocloseunusedconnections.

Labels(packof10) 0,0 9121719004 Whitelabelstoinsertingroovesonthesideoftheconnection

Dimensions and wiring diagrams

Conductor Colour Input Output 1 Pink Signal 1 Signal 1 2 Grey Signal 2 Signal 2 3 Yellow Signal 3 Signal 3 4 Green Signal 4 Signal 4 5 White Signal 5 Signal 5 6 Red Signal 6 Signal 6 7 Black Signal 7 Signal 7 8 Violet Signal 8 Signal 8 9 Grey-Pink Signal 9 Signal 9 10 Red-Blue Signal 10 Signal 10 A Blue 0 V 0 V B Brown +24 V PE

19

P1E Cylinders

08.03


Repair kits= Includedinrepairkit

Applythreadlockingadhesivetothegradestated= belowwheresymbolindicates(41multipurpose lockingandsealing).

= Lubricatewithgrease,seebelow.

Repairkits

Standard Hightemperature

3 P1E-6KRM P1E-6KRV 40 P1E-6LRM P1E-6LRV 50 P1E-6MRM P1E-6MRV 63 P1E-6NRM P1E-6NRV 80 P1E-6PRM P1E-6PRV 100 P1E-6QRM P1E-6QRV 15 P1E-6RRM P1E-6RRV 160 P1E-6SRM P1E-6SRV 00 P1E-6TRM P1E-6TRV

T1Nm NV TNm NV

3 4-5 6 9-10 5

40 4-5 6 9-10 6

50 9-10 8 8-30 1

63 9-10 8 8-30 1

80 18-0 10 80-85 1

100 18-0 10 80-85 1

15 4-6 4 115-15 30

160 36-38 30 163-177

00 36-38 30 163-177

Grease for P1E

Standard 30g 9127394541

Hightemperature 30g 9127394521

Lowtemperature 30g 9127394541

Parker Hannifin LtdPneumatic Division EuropeThe Collins Centre,Lichfield South, Wall Island,Birmingham Road, Lichfield.WS14 0QP United KingdomTel.: +44 (0) 1543 483800Fax: +44 (0) 1543 483801www.parker.com/euro_pneumatic

AE UAE, Dubai Tel: +971 4 8127100 [email protected]

AR Argentina, Buenos Aires Tel: +54 3327 44 4129

AT Austria, Wiener Neustadt Tel: +43 (0)2622 23501-0 [email protected]

AT Eastern Europe, Wiener Neustadt Tel: +43 (0)2622 23501 900 [email protected]

AU Australia, Castle Hill Tel: +61 (0)2-9634 7777

AZ Azerbaijan, Baku Tel: +994 50 2233 458 [email protected]

BE/LU Belgium, Nivelles Tel: +32 (0)67 280 900 [email protected]

BR Brazil, Cachoeirinha RS Tel: +55 51 3470 9144

BY Belarus, Minsk Tel: +375 17 209 9399 [email protected]

CA Canada, Milton, Ontario Tel: +1 905 693 3000

CH Switzerland, Etoy Tel: +41 (0) 21 821 02 30 [email protected]

CL Chile, Santiago Tel: +56 2 623 1216

CN China, Shanghai Tel: +86 21 5031 2525

CZ Czech Republic, Klecany Tel: +420 284 083 111 [email protected]

DE Germany, Kaarst Tel: +49 (0)2131 4016 0 [email protected]

DK Denmark, Ballerup Tel: +45 43 56 04 00 [email protected]

ES Spain, Madrid Tel: +34 902 33 00 01 [email protected]

FI Finland, Vantaa Tel: +358 (0)20 753 2500 [email protected]

FR France, Contamine s/Arve Tel: +33 (0)4 50 25 80 25 [email protected]

GR Greece, Athens Tel: +30 210 933 6450 [email protected]

HK Hong Kong Tel: +852 2428 8008

HU Hungary, Budapest Tel: +36 1 220 4155 [email protected]

IE Ireland, Dublin Tel: +353 (0)1 466 6370 [email protected]

IN India, Mumbai Tel: +91 22 6513 7081-85

IT Italy, Corsico (MI) Tel: +39 02 45 19 21 [email protected]

JP Japan, Tokyo Tel: +(81) 3 6408 3901

KR South Korea, Seoul Tel: +82 2 559 0400

KZ Kazakhstan, Almaty Tel: +7 7272 505 800 [email protected]

LV Latvia, Riga Tel: +371 6 745 2601 [email protected]

MX Mexico, Apodaca Tel: +52 81 8156 6000

MY Malaysia, Shah Alam Tel: +60 3 7849 0800

NL The Netherlands, Oldenzaal Tel: +31 (0)541 585 000 [email protected]

NO Norway, Ski Tel: +47 64 91 10 00 [email protected]

NZ New Zealand, Mt Wellington Tel: +64 9 574 1744

PL Poland, Warsaw Tel: +48 (0)22 573 24 00 [email protected]

PT Portugal, Leca da Palmeira Tel: +351 22 999 7360 [email protected]

RO Romania, Bucharest Tel: +40 21 252 1382 [email protected]

RU Russia, Moscow Tel: +7 495 645-2156 [email protected]

SE Sweden, Spnga Tel: +46 (0)8 59 79 50 00 [email protected]

SG Singapore Tel: +65 6887 6300

SK Slovakia, Bansk Bystrica Tel: +421 484 162 252 [email protected]

SL Slovenia, Novo Mesto Tel: +386 7 337 6650 [email protected]

TH Thailand, Bangkok Tel: +662 717 8140

TR Turkey, Istanbul Tel: +90 216 4997081 [email protected]

TW Taiwan, Taipei Tel: +886 2 2298 8987

UA Ukraine, Kiev Tel +380 44 494 2731 [email protected]

UK United Kingdom, Warwick Tel: +44 (0)1926 317 878 [email protected]

US USA, Cleveland Tel: +1 216 896 3000

VE Venezuela, Caracas Tel: +58 212 238 5422

ZA South Africa, Kempton Park Tel: +27 (0)11 961 0700 [email protected]

Catalogue PDE2580TCUK-ul. May 2009

Your local authorized Parker distributor

2009 Parker Hannifin Corporation. All rights reserved.

ParkerWorldwide

European Product Information Centre

Free phone: 00 800 27 27 5374

(from AT, BE, CH, CZ, DE, DK, ES, FI, FR, IE,

IT, NL, NO, PL, PT, RU, SE, UK, ZA)

p1e technical catalogue-uk

Documents

parker hannifin corporation

products andor systems

safety risk

product andor system

product features

conditions of sale

hydraulic system

improper selection