oxo admin training presentation

7/24/2019 OXO Admin Training Presentation

1/67

Alcatel OMNIPCX OFFICE

TRAINING MATERIALS for ADMINISTRATORS

Prepared by Dave Rebong


2/67

Omni PCX Office

Overview

Architecture

HardwareConfiguration


3/67

OVERVIEW


4/67

OVERVIEW


5/67

ArchitectureTRADITIONALPABX

Private AutomaticBranch ExchangePABX

Analog

Proprietary Phone

Fax


6/67

Architecture

CONTINUESWIDE PHONE SECURITYINNOVATIONSTERMINAL PLATFORMS

MOBILITY

CONTACT UNIFIED SOLUTIONCENTER COMMUNICATION

ADVANCED INTERNET APPLICATIONRICH HOTEL

TELEPHONYACCESS OPENNESSFEATURES VOIP SERVICE Via XML

Using Linux and the Wide ALCATEL Platform


7/67

Architecture

TOPHOLOGY Environment


8/67

Cabinets

BoardsHardware & Design

Alcatel-Lucent Omni-PCX Office Compact Edition

AND RACK S/M/L MODULES:

Alcatel-Lucent Omni-PCX Office Compact Edition -

- Alcatel-Lucent Omni-PCX Office Compact Edition is a wall-mountedversion - It provides 2 slots (1xCPU slot+1xMIX slot)

-TThe Alcatel-Lucent Omni-PCX Office Compact Edition rack is not expandableand cannot be used as satellite

12 ports1 CPU slot + 1 MIX slot

Power consumption: 1.5 A (240 V)

Dimensions: H = 345 mm; W = 370 mm; D = 65mm. Weight: 5.1 kg.


9/67

Cabinets


The following mixed boards areavailable:

MIX 448

MIX 484

AMIX 444-1

AMIX 484-1

AMIX 448-1


10/67

Cabinets


RACK 1 (SMALL) or Small

- The RACK S module (formerly known as RACK 1) mainly consists of a plastic frame -

The plastic frame receives all the parts for attaching the power supply board, the

fans, the battery and the mains power connector, and everything. -There is no

backplane board: the metric connectors are on the power supply module. -19" rack

modules which can be mounted in a rack or placed on a shelf - it has 3 slots 1 for CPU

& 2 for card interfaces28 ports

1 CPU slot + 2 general-purpose slots (no SLI16

board) Power consumption: 1 A (230 V) / 2 A (110 V)

- 80 W. Dimensions: H = 66 mm (2.6 inches);

W = 442 mm (17,4 inches); D = 400 mm (15.76

inches). Weight: 6 kg.


11/67

Cabinets


Hardware Assembly Details:


12/67

Cabinets


RACK M (MEDIUM) AND RACK L (LARGE)

- The frame consists of a "U"-shaped sheath closed on the top by a riveted plate -The boards are guided by 2 rails for RACK M (formerly known as RACK 2), or 3 rails

for RACK L (formerly known as RACK 3), riveted vertically to the frame.

-The enclosure consists of a metal top part, two metal side parts and a plastic front face

Access to the fans, the power supply module and the batteries is gained by

disconnecting the power cable and unscrewing the backplane.-IIt has 6 Slots 1 for CPU & 5 for card interfaces

56 ports

1 CPU slot + 5 general-purpose slots

Power consumption: 1.2 A (230 V) / 2.3 A (110 V)- 120W.

Dimensions: H = 110 mm (4.3 inches);

W = 442 mm (17.4 inches); D = 400 mm (15.76inches). Weight: 11 kg.


13/67

Cabinets


- 96 ports

- 1 CPU slot + 4 specific general-purpose

slots (no UAI16 and MIX boards)- Power consumption: 1.2 A (230 V) / 2.3 A (110 V) -150W. - Dimensions: H = 154 mm (6.1 inches)

RACK L (LARGE) W = 442 mm (17.4 inches); D = 400 mm (15.76inches). -Weight: 13 kg.

- It has 9 slots, 1 for CPU & 8 for card interfaces

The Maximum capacity:

-The system can be extended by adding oneor two modules to the main module

-All combinations are possible, with a maximum of3 modules

RACK XL (LARGE) -The maximum capacity is 236 stations.

-It has MAX of 27 slots, 1 for CPU, 2 for MEX, & 24for card interfaces


14/67

Cabinets


Hardware Assembly Details:


15/67

Cabinets

BoardsCard, Modules & Interfaces

CPU Overview & Migration History

The CPU-1 board is based on the new tracking of the ASPEN CPU board and has thefollowing characteristics: 133 MHz processor, 32 MB NAND Flash, 64 MB SDRAM, DSP5410.

The CPU-2board has the same main characteristics as the CPU-1 board, except that the32 MB NAND Flash memory is replaced by a 64 MB NAND Flash memory.

The CPU-3 board has the following characteristics: 133 MHz processor, 128 MBNAND Flash, 64 MB SDRAM.

The CPU-3m board is fitted with a 133 MHz processor, a 128 MB NAND Flash memoryand 64 MB of SDRAM.

The CPU-4 board is fitted with a 133 MHz processor, a 128 MB NAND Flash memoryand 128 MB of SDRAM.

The Latest CPU is POWERCPU


16/67

Cabinets

Boards

Daughter Boards

The CPU-1/CPU-2/CPU-3/CPU-3m/CPU-4 boards can be equipped with the following

daughter boards:

HSL (High Speed Link): module interconnections. This daughter board is notcompatible with the Mini-Mix daughter board.

XMEM, XMEM-1, XMEM128-1 (eXpansion MEMory): memory extension. This

daughter board is not compatible with the VoIP daughter board.This daughter board includes a 2.5" hard drive

connector: Use a flat cable to connect a PATA harddiskUse a P2SATA-AXV daughter board to connect a SATA hard disk

AFU, AFU-1 (Auxiliary Function Unit): supporting auxiliary functions such as general bell,

door-phone, audio In, audio Out, etc. The AFU-1 board is required for the connection ofthe ISDN-EFM box (T0/S0 forwarding)

VoIP, VoIP-1 (Voice over IP): Gateway H.323 with integrated Gatekeeper function or

SIP Gateway. Supports management of CODECs and DSPs for IP telephony and IP

Trunk (IP trunk lines) applications


17/67

Cabinets

BoardsCard, Modules & Interfaces CPU-4

CPU Module

VOIP or XMEM card

CPU Module

SATA HD ConnectorProcessor

High Speed Link AFU -x

Mix Connector


18/67

Cabinets


Available functions:

-LAN: 10/100 base T Ethernet port (MDI-II/straight)

- AUDIO-OUT: loudspeaker, alarm and general bell interfaces; 12V output -

AUDIO-IN: please-wait message and background music interfaces -DOORPHONE: door phone interfaces- CONFIG: RS232 for MMC, NMC and PPP connections

- MODULE1: HSL link to add-on module 1 (if HSL daughter board present) - MODULE2: HSL link to add-on

module 2 (if HSL daughter board present) - ISDN T0 1: T0 access 1 if Mini-Mix daughter board present

(CPU-3m or CPU-4 only) - ISDN T0 2: T0 access 2 if Mini-Mix daughter board present (CPU-3m or CPU-4

only) - SLI1/2: access to analog terminals 1 and 2 (if Mini-Mix daughter board present on CPU-3m or CPU-

4)


19/67

Cabinets


RJ 45 PIN SOCKET ASSIGNMENT


20/67

Cabinets

BoardsCard, Modules & Interfaces POWER CPU

The Power CPU board, based on processor Power Quicc II Pro MPC8377

from Free scale, has the following characteristics:

-667 MHz processor, 256 MB DDR2 SDRAM, SD/MMC Memory card(2GB), -VoIP DSP C6421/4 (16 VoIP channels).

The Power CPU board is built around 2 main blocks interconnected viaPCI:

-CPU part with MPC8377 processor and following interfaces:

DDR 2 memory

BOOT (NOR Flash) Serial ATA for Hard Disk

SD card controller PCI

LAN interfacesI2C


21/67

Cabinets


-Telecom part with INOX ASIC and with connections to:

Telecom DSP

Modem DSPVoIP DSP

Legacy Telecom architecture (PCM buses, ASL, HSL)

Daughter Boards

The POWER CPU boards can be equipped with the following daughter boards:

HSL (High Speed Link): module interconnections. This daughter board isnot compatible with the Mini-Mix daughter board.

ARMADA 16 -Gateway H.323 with integrated Gatekeeper function or SIPGateway. Supports management of CODECs and DSPs for IP telephony and IP

Trunk (IP trunk lines) applications


22/67

Cabinets


AFU-1 (Auxiliary Function Unit): supporting auxiliary functions such as general bell,

doorphone, audio In, audio Out, etc. The AFU-1 board is required for the connection of

the ISDN-EFM box (T0/S0 forwarding)

MINI-MIX - Supports a combination of 2 SLI ports or 1 SO & 1 TO, or 1 SLI & 1 TO

SATEX RoHS board-connects the HD SATA to POWER CPU Module


23/67

Cabinets


Power CPU Front Panel LEDs

LED Indicators & meanings


24/67

Cabinets


Output Port

Available functions:

- LAN: 10/100/1000 base T Ethernet port (MDI-II/straight).

- SLI1/SLI2: Analog Z accesses from Mini-MIX board, General ringer; 12Voutput -AUX: General ringer; 12V output

-- MODULE1: HSL1 link of HSL board for connection to module expansion1 - ISDN T01: ISDN T01 port of Mini-MIX board

- MODULE2: HSL2 link of HSL board for connection to module expansion2 - ISDN T02: ISDN T02 port of Mini-MIX board

- AUDIO: Interfaces Please wait message, Background music, Loudspeaker,Alarm - DOORPHONE: Interfaces doorphone


25/67

Cabinets

BoardsCard, Modules & Interfaces POWER CPUPOWER CPU Front Panel

Output Port



26/67

Cabinets

BoardsCard, Modules & Interfaces POWER MEX

-The Power MEX board is a controller board for extension or module expansion.

-The Power MEX board (POWER Module EXPANSION) performs the controllerfunctions in the expansion platforms.

-The Power MEX board is equipped with an HSL1 (High Speed Link) boardfor interconnecting with the basic platform.

- The Power MEX board is connected to the MODULE 1 or MODULE 2 connector

on the Power CPU boardMeaning of the LED Indications

MEX Front Panel


Figure 2.15: HSL1 Daughter Board on Power MEX Board


27/67

Cabinets

BoardsCard, Modules & Trunk cards BRA T0 ISDN card

The BRA board The BRA(Basic Rate Access) board provides the basic access points (2 x

64-Kbps B-channels + 1 x 16-Kbps D-channel per access) for connecting the system to theISDN digital public network (point-to-point or multipoint T0 link)starting with version

R2.0,to a private network (point-to-point DLT0 link); 3 versions are offered:

Types:

- BRA2: 2 T0 accesses OUTPUT PORTS (FACEPLATE)

- BRA4: 4 T0 accesses- BRA8: 8 T0 accesses

Connection Diagram



28/67

Cabinets

BoardsCard, Modules & Trunk cards PRI /E1 ISDN card

The PRA board (Primary Rate Access) board provides 1 primary access for connecting the

Alcatel-Lucent Omni-PCX Office Communication Server system to the ISDN digital publicnetwork or to private networks.

Types:

PRA -T2, DASS2, DLT2: 30 x 64-Kpbs B-channels + 1 x 64-Kbps D-channel; 2048

KbpsPCM R2: 30 x 64 Kbps B-channels + 1 x 4 Kbps signaling channel; 2048 Kbps.

OUTPUT PORTS (FACEPLATE)Connection Diagram



29/67

Cabinets

BoardsCard, Modules & Interfaces PRI /E1 ISDN card

T2 board example

ALARM LEDS & Meanings


30/67

Cabinets

BoardsCard, Modules & Interfaces APA 4/8 card

APA Boards

This board is used to connect to the analog public network ( 4 or 8 ports).

Types: OUTPUT PORTS (FACEPLATE)

- APA 4- APA 8

Connection Diagram



31/67

Cabinets

BoardsCard, Modules & Interfaces SLI - xx-1

The SLI, SLI-1 or SLI-2 board (Single Line) allows the connection of 2-wireanalog terminals (Z). 3 board versions are available:

Types:OUTPUT PORTS (FACEPLATE)

- SLI4: 4 Z interfaces -

SLI8: 8 Z interfaces -

SLI16: 16 Z interfaces

Connection Diagram



32/67

Cabinets

BoardsCard, Modules & Interfaces UAI - xx-1

The UAI board allows the connection of digital stations (UA). The UAI-16 board

allows to remotely supply the terminals connected to the 16 interfaces from a EPS48external power supply connected to interface 1 using an external adaptation power

cable (splitter).

Types:OUTPUT PORTS (FACEPLATE)

- boards without external power supplycapability: UAI4: 4 UA interfaces

UAI8: 8 UA interfaces UAI16: 16 UA interfaces

- boards with external power supplycapability: UAI16-1: 16 UA interfaces

Connection Diagram



33/67

Cabinets

BoardsCard, Modules & Interfaces AMIX x/x/x-1

The AMIX-1 (Analog Mixed Line) board is used to connect the analog publicnetwork (PSTN) to the PBX. It has the following characteristics:

- 4 analog line accesses

- a maximum of 8 UAinterfaces - a maximum of 8 Zinterfaces- an OBC system interface supporting AT, Z and UAsignaling - protection features

OUTPUT PORTS (FACEPLATE)Types:

AMIX 4/8/4 -1 AMIX 4/4/8 -1AMIX 4/4/4 -1


Connection Diagram:

SAME as other modules


34/67

Cabinets

BoardsCard, Modules & Interfaces LANX -1

The LAN X board (Ethernet LAN Switch) serves to connect Ethernet terminals (IEEE 802.3 compatible)

3 board versions are available:

- LanX8 = 810/100 BT Ethernet ports (ports 1 to 7: MDI-X/crossover; Uplink: MDI-II/straight link) -LanX16 = 16 10/100 BT Ethernet ports (ports 1 to 15: MDI-X/crossover; Uplink: MDI-II/straight link) -

LANX16-1 = 16 10/100 BT Ethernet ports (ports 1 to 15: MDI-X/crossover; Uplink: MDI-II/straight link);

low consumption. Contrary to the LANX8 and LANX16 boards that are seen by the system as CPU

boards,-Green LED (left) = link status and activity:LED off: link disconnected

LED steady: link connected

LED flashing: link active -

Yellow LED (right) = speed:

off: low speed (10 or 100 Mb for Gigabit port, 10 Mb for the other ports) on: high speed (1 Gb for Gigabit port, 100 Mb for the other ports)

Connection Diagram



35/67

SYSTEM Programming / Configuration/ OMC

Alcatel OMNI-PCX OFFICE -Can be configure easy. By Default the SYSTEM is alreadypre-configured via the ALCATEL Lucent. The OXO System has its General

Characteristic:All CARDS / Modules are all HOT swappable (excluding CPU & MEX modules)

OXO automatically creates in the System Profile the cards/modules that are in-place at system usable slots.

Upon System Prep-up the PH version is loaded via LOLA tool or ex-factory configuration.

Used ONLY OMC tool for System configuration.

TELNET is not Support for OXO system.

Default IP address is 192.168.92.246/24

OXO System interface on configuration are via IP, V.24, & z modem

All System configuration/ CDB files are stored at OXO HD or NAND FLASH or can be

stored at your PC as CBD files for back-up purposes.


36/67


Starter for System programming:

GENERAL REQUIREMENTS

+CONNECT

OXO SystemPC OMC Software


37/67


OMC overview -A thick client software proprietary to OXO systems, which can be use to

fully manage the OXO system. Install the package application on your PC, used Windows

platforms such as XP Pro, SP1, SP2, & SP3, MS Server 2003, SP1 & SP2, or WIN7 SP1.

OMC LEVELS -There are 3 OMC access to the OXO Systems:

- Operator Access- Administrator Access- Installer Access

OMC Passwords -Each Levels are protected w/ unique passwords. These password

can be change depending on your requirement. Below are thedefault passwords:

- Operator Access = help1954 -Administrator Access= kilo1987


38/67


HOW TO CONNECT

Assuming that OMC was already installed follow the step procedures

Launch OMC, Select Connectto PCX

ModificationTypical PressOKStep 2 Select LAN, Fill the IP @ of

Step 1OXO, & PressOK

Step 3

kilo1987 Select ADMINISTRATOR

Enter correct password & PressOKStep 4


39/67


Accessing the Main Menu

Assuming that PMC is logged-in successfully, the administrator should see the ff menus:

Subscriber- Use the this menu for modifying pre-programmed profiles of All Extensions.

GROUP - For modifying Operator Groups, Hunting Groups & Pickup groups. System- Basic

modifications for System Date & Time, Numbering Plans, System software key Common SD -

for Add/delete & edit of Company Speed Dials/ Directory & Class grouping External Access -

Displays the current setting for External lines & edits of trunk groups.


40/67

SYSTEM Programming / Configuration/ OMC/ Subscriber

BASIC Subscriber Menu


41/67

SYSTEM Programming / Configuration/ OMC/ Subscriber

BASIC Subscriber Menu

Int. No. = Display/edit the Internal Extension Number of an Extension for OXOusers Pub. No. = Display/edit the Public DID number of an Extension for OXO

users. NAME = Display/edit/delete the Names Spelling of a user

SET TYPES = Display only the Model or Phone type assigned to a

User. REST. = Display/modify barring setting of a User Extension

Accessible Trunk Groups = Display/edit/delete trunk group access code to a given

user/s Call Distributions = 2ndpage under BASIC Subscriber Menu that display

information & routing status between external lines & subscribers. Distribution lists

may be display/edit/delete.

Rest/barring = A submenu of BASIC Subscriber Menu that contains number prefixes thateither to be allowed or restricted to the use of a user.

Advanced = A submenu of BASIC Subscriber Menu that re-direct the administrator tothe more deeper configuration for users extension.

Apply, OK, Cancel - for Validation or cancelation of any modification.


42/67

SYSTEM Programming / Configuration/ OMC/Subscriber/Call Dist.

Basic Call Distribution via External Lines


43/67


Basic Call Barring table of prefixes & rights

Apply


44/67

SYSTEM Programming via OMC\ADVANCED USER CONFIG

USER ADVANCED PROGRAMMINGCLICK ADVANCEDAdd a non Physical portsTo navigate on this

Areas to edit the for a User via IP, DECT,

OMC Page basic USER parameters Virtual users.

To apply all modified

Item at this page menu

PhysicalGo to deeper & editAddress

in Details the userOf a Portconfiguration

ExtensionUse to delete user

NumberMailbox immediately

Assigned to Name of a user,Phone set

A User Used by Dial By NameModel assigned

featuresto a user


45/67

SYSTEM Programming / Configuration/ OMC/Subscriber

CLICK DETAILSKEY

To navigate on this

OMC Page

Detailed

Configuration

Of a user

Apply


46/67

SYSTEM Programming / Configuration/ OMC/GROUPS

CLICK GROUPSICON

To navigate on this

OMC Page

Select, edit,

Add, Delete Select, edit, Select, edit, Add, DeleteEntries or members Add, Delete Entries or membersOf an Operator group Entries or members Select, edit, Of a Pickup GroupsThere are 8 groups: Of a User Group/s

Add, Delete There are 16 groups that1 for Default Group There are 30 groups thatEntries or members can be created, each1 for Opening Hours Can be created, from 540Of a Paging Groups group has 16 members1 for Restricted Hours Up to 570, each group hasThere are 8 groups thatEach group has 8 16 membersCan be created, each group hasmembers32 members


47/67


CLICK GROUPSICON

To navigate on this

OMC Page

Attendant GROUPS

Select, edit,

Add, Delete

Entries or members Of

an Operator groupThere are 8 groups: 1

for Default Group 1 for

Opening Hours 1 for

Restricted Hours Each

group has 8 members


48/67


CLICK AttendantGroups

To navigate on this

OMC Page

Use this area toModifyparameters

Apply


49/67


HUNTING GROUPS

Select, edit,

Add, Delete

Entries or membersOf a User Group/s

There are 30 groups that

Can be created, from 540

Up to 570, each group has

16 members


50/67


CLICK HUNTINGGroups

To navigate on this

OMC Page


Apply

/ / /


51/67


BROADCAST GROUPS

Select, edit,

Add, Delete

Entries or members Of a

Paging Groups There are

8 groups that

Can be created, each group has32 members

/ f / /


52/67


CLICK BROODCASTGroups

To navigate on this

OMC Page


Apply

i / fi i / /


53/67


PICKUP GROUPS

Select, edit, Add, Delete

Entries or members Of a

Pickup Groups There are

16 groups that can be

created, each group has

16 members

SYSTEM P i / C fi i / OMC/GROUPS


54/67


CLICK PICKUPGroups

To navigate on this

OMC Page


Apply

SYSTEM P i / C fi ti / OMC/SYSTEMS


55/67

SYSTEM Programming / Configuration/ OMC/SYSTEMS

CLICK GROUPSICON

To navigate on this

OMC Page

Numbering Plans

Select, edit,

Add, Delete

Entries or members Of

an Operator groupThere are 8 groups: 1

for Default Group 1 for

Opening Hours 1 for

Restricted Hours Each

group has 8 members



56/67


CLICK DialingPlans

To navigate on this

OMC Page

Use this to

Select numberformats

Select to NavigateOn advanced

Numbering PlanApplyConfiguration



57/67


CLICK

To navigate on this

OMC Page

Used by Numbering PlansSame as Internal Numbering PlansUsed byExternal callers, Intended for PBXNumbering Plan, For Private PABXInternalTELCO, Networks Features while inUsed during NetworkingUsers of theTo reach internal Restricted hours conversationPCX SystemUsers via AA or DID

SYSTEM P i / C fi ti / OMC/SWK


58/67

SYSTEM Programming / Configuration/ OMC/SWK

CLICK

To navigate on this Software KEYS

OMC Page

Actual CPU ID

Actual SoftwareKey Codes

To view the actual

Active features via

License unlock

Apply



59/67


CLICK

To navigate on thisOMC Page

On These Screen Menu , the SYSTEM will allow you to VIEW all the ActiveLicenses of the Omni-PCX Office.

Each TABs are Comprise of licenses that applies to a group or specific features

& Application.

Values indicated on TABs are not to modify. These are dependent on SWK

SYSTEM Programming / Configuration/ OMC/CSD


60/67


CLICK the SPEED DIAL ICON

To navigate on this

OMC Page

Add, Remove, Edit w/

Numbers & Names for

Each Speed dial entries

Click here to go to

Advance configurationApply

Validate & Apply any

Modification for BASIC

MENU



61/67


CLICK

To navigate on this Common Speed Dials

OMC Page

Right Click & Apply

SYSTEM Programming / Configuration/ OMC/External Access


62/67

SYSTEM Programming / Configuration/ OMC/External Access

CLICK ExternalAccesses

To navigate on this

OMC Page

Add, Remove, Edit the

Trunk Groups & DISA

Activation for eachLine access

Apply

SYSTEM BACK / RESTORE via OMC


63/67

SYSTEM BACK / RESTORE via OMC

Starter for System Backup / Restore

GENERAL REQUIREMENTS

CONNECT

DATA TRANSFER

OXO SystemPC w/ RESTOREOMC



64/67


HOW TO BACKUP/RESTORE

Assuming that OMC is already connected ONLINE at OXO

Step 1

Step 2



65/67


DATA TRANSFER from OXO to PC

Select the item to backup

Use to select detail coin target backup or restore

DATA transfer is going on

Step 3

Step 4



66/67


Client database saveas

Assuming that DATA transfer was already done

Click Saveastab at File Menu

Define device name

Or Customer IDDefine Client

Database Name

Saved Database on your PC

Disconnect Access to the system


67/67

End of Document

oxo admin training presentation

Documents