oxivit aktiv plus - kemi · company name novadan aps postal address platinvej 21 postcode dk-6000...

The safety data sheet is in accordance with Commission Regulation (EU) 2015/830 of 28 May 2015 amending Regulation (EC)No 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction ofChemicals (REACH)

SECTION 1: Identification of the substance / mixture and of the company /undertakingDate issued 22.05.2012

Revision date 13.09.2017

1.1. Product identifierProduct name Oxivit Aktiv Plus

Article no. 12557, 12726, 12870, 15560

1.2. Relevant identified uses of the substance or mixture and uses advised againstUse of thesubstance/preparation

Disinfectant based on peracetic acid.

Relevant identified uses SU0-2 Other activities related to manufacture and servicesSU1 Agriculture, forestry, fisherySU4 Manufacture of food productsSU20 Health servicesPC8 Biocidal Products (e.g. Disinfectants, pest control)PROC5 Mixing or blending in batch processes for formulation of preparations and articles(multistage and/or significant contact)PROC7 Industrial sprayingPROC10 Roller application or brushingPROC11 Non-industrial sprayingPROC28 Manual maintenance (cleaning and repair) of machineryERC6B Industrial use of reactive processing aidsERC8B Wide dispersive indoor use of reactive substances in open systems

Uses advised against No specific uses advised against are identified.

The chemical can be used bythe general public

No

1.3. Details of the supplier of the safety data sheetManufacturerCompany name Novadan ApS

Postal address Platinvej 21

Postcode DK-6000

City Kolding

Country Danmark

SAFETY DATA SHEETOxivit Aktiv Plus

Oxivit Aktiv Plus of 16

This safety data sheet has been created with Eco Publisher (EcoOnline) Revision date 13.09.2017

Tel + 45 76 34 84 00

Fax + 45 75 50 43 70

E-mail [email protected]

Website www.novadan.dk

1.4. Emergency telephone numberEmergency telephone Description: UK: NHS: 111

EI: National Poisons Information Centre, 24/7: 01 809 2166

SECTION 2: Hazards identification

2.1. Classification of substance or mixtureClassification according toRegulation (EC) No 1272/2008[CLP / GHS]

Ox. Liq. 2; H272

Met. Corr. 1; H290

Skin Corr 1B; H314

Eye Dam. 1; H318

Acute tox. 4; H302

STOT SE3; H335

Aquatic Chronic 1; H410

Acute tox. 4; H332

Substance / mixturehazardous properties

For further information, please refer to section 11.

Additional information onclassification

The informations stated in this MSDS, applies for the concentrated product.

2.2. Label elements

Hazard Pictograms (CLP)

Composition on the label Hydrogen peroxide , Acetic acid , Peracetic Acid 50 g/kg

Signal word Danger

Hazard statements H272 May intensify fire; oxidiser.H290 May be corrosive to metals.H314 Causes severe skin burns and eye damage.H302 Harmful if swallowed.H332 Harmful if inhaled.H335 May cause respiratory irritation.H410 Very toxic to aquatic life with long lasting effects.

Precautionary statements P210 Keep away from heat / sparks / open flames / hot surfaces. – No smoking.P261 Avoid breathing vapours/spray/mist.P280 Wear eye protection/protective gloves/protective clothing.P303+P361+P353 IF ON SKIN (or hair): Remove / Take off immediately all contaminatedclothing. Rinse skin with water / shower.



mailto:[email protected]

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Removecontact lenses, if present and easy to do. Continue rinsing.P310 Immediately call a POISON CENTER or doctor / physician.P234 Keep only in original container.P403+P235 Store in a well-ventilated place. Keep cool.P273 Avoid release to the environment.

Supplemental label information For professional users only. Read attached instructions before use.

2.3. Other hazardsDescription of hazard In contact with compounds containing chlorine, toxic gases may form. Generates strong heat

in contact with alkaline compounds, risk of bumping.

Health effect Corrosive to skin and eyes.May cause permanent damage to the eyes, especially if the product is not washed awayIMMEDIATELY.Harmful if swallowed.Harmful if inhaled.Vapours/aerosol spray may irritate the respiratory system.See section 11 for additional information on health hazards.

Environmental effects Very toxic to aquatic life with long lasting effects.Substantial amounts of the product may lead to a local change in acidity in small watersystems which may have adverse effects on aquatic organisms.This product does not contain any PBT or vPvB substances.

Other hazards Undiluted, the product may be corrosive to metals.When used in the recommended dosages, contact time and temperature, the product iscompatible with acid-proof stainless steels.

SECTION 3: Composition/information on ingredients

3.2. MixturesSubstance Identification Classification ContentsHydrogen peroxide CAS no.: 7722-84-1

EC no.: 231-765-0Index no.: 008-003-00-9REACH Reg. No.: 01-2119485845-22-xxxx

Ox. Liq. 1; H271Acute tox. 4; H332Acute tox. 4; H302Skin Corr 1A; H314Eye Dam. 1; H318STOT SE3; H335

15 – 30 %

Acetic acid ...% CAS no.: 64-19-7EC no.: 200-580-7Index no.: 607-002-00-6REACH Reg. No.: 01-2119475328-30-XXXX

Flam. Liq. 3;H226Skin Corr. 1A;H314

5 – 15 %

Peracetic Acid CAS no.: 79-21-0EC no.: 201-186-8

Flam. Liq. 3; H226;Org. Perox CD; H242;Skin Corr 1A; H314;Eye Dam. 1; H318;Acute tox. 3; H301;Acute tox. 4; H312;Acute tox. 2; H330;STOT SE3; H335;Aquatic Acute 1; H400; M-factor 1;Aquatic Chronic 1; H410; M-

5 – 15 %



factor 10;

Substance comments -5-15%: Disinfectant<5%: phosphonate , cationic surfactant . The full text for all hazard statements is displayed in section 16.

SECTION 4: First aid measures

4.1. Description of first aid measuresGeneral Remove affected person from source of contamination.

Inhalation Move injured person into fresh air and keep person calm under observation. If uncomfortable:Seek hospital and bring these instructions.

Skin contact Wash off promptly and flush contaminated skin with water. Promptly remove clothing if soakedthrough and flush skin with water. Get medical attention if any discomfort continues.

Eye contact Important! Immediately rinse with water for at least 15 minutes. May cause permanent damageif eye is not immediately irrigated. Make sure to remove any contact lenses from the eyesbefore rinsing. Immediately transport to hospital or eye specialist. Continue flushing duringtransport to hospital.

Ingestion Immediately rinse mouth and drink plenty of water. Call an ambulance. Bring along theseinstructions. Do not induce vomiting. If vomiting occurs, the head should be kept low so thatstomach vomit doesn't enter the lungs. Do not give victim anything to drink if he isunconscious.

Recommended personalprotective equipment for firstaid responders

Wear necessary protective equipment. For personal protection, see section 8.

4.2. Most important symptoms and effects, both acute and delayedAcute symptoms and effects Strongly corrosive. Causes severe burns and serious eye damage. Immediate first aid is

imperative.Spray mists irritate the respiratory system, and cause coughing and difficulties in breathing.May cause burns in mucous membranes, throat, oesophagus and stomach.

Delayed symptoms and effects The etching penetrates deeply into the tissue and is first noticed after a while.

4.3. Indication of any immediate medical attention and special treatment neededOther Information In case of unconsciousness, ingestion or eye contact: Immediately call a doctor / ambulance.

Show this safety data sheet.

SECTION 5: Firefighting measures

5.1. Extinguishing mediaSuitable extinguishing media Use fire-extinguishing media appropriate for surrounding materials.

5.2. Special hazards arising from the substance or mixtureFire and explosion hazards Although not flammable, this substance has oxidising properties and may increase the rate of

combustion of other materials. Closed containers can burst violently when heated, due toexcess pressure build-up. Water used for fire extinguishing, which has been in contact withthe product, may be corrosive.



Hazardous combustionproducts

Fire or high temperatures create: Oxygen.

5.3. Advice for firefightersPersonal protective equipment Wear necessary protective equipment. For personal protection, see section 8.

Fire fighting procedures Reference is made to the company fire procedure. If risk of water pollution occurs, notifyappropriate authorities. Avoid breathing fire vapours. Containers close to fire should beremoved or cooled with water.

SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency proceduresPersonal protection measures Look out! The product is corrosive. Use protective gloves, goggles and suitable protective

clothing. In case of inadequate ventilation use suitable respirator. For personal protection, seesection 8.

6.2. Environmental precautionsEnvironmental precautionarymeasures

Do not discharge into drains, water courses or onto the ground. Contact local authorities incase of spillage to drain/aquatic environment.

6.3. Methods and material for containment and cleaning upCleaning method Dam and absorb spillages with sand, earth or other non-combustible material. Wash

contaminated area with water.

6.4. Reference to other sectionsOther instructions See section 8 and section 13.

SECTION 7: Handling and storage

7.1. Precautions for safe handlingHandling Avoid inhalation of vapours/spray and contact with skin and eyes. Oxidising material – Keep

away from flammable and combustible materials. Avoid excessive heat. Do not mix withhypochlorite containing products: toxic chlorine vapors may be formed.

7.2. Conditions for safe storage, including any incompatibilitiesStorage Store in tightly closed original container in a dry, cool and well-ventilated place. Keep away

from food, drink and animal feeding stuffs. Store separated from: Chlorine and Alkalis.Oxidising material – Keep away from flammable and combustible materials.

Conditions to avoid Keep away from heat, sparks and open flame.

Conditions for safe storageStorage Temperature Value: -10 – 30 °C

Storage Stabilit Durability: 24 months.

7.3. Specific end use(s)Specific use(s) The identified uses for this product are detailed in Section 1.2.



SECTION 8: Exposure controls/personal protection

8.1. Control parametersSubstance Identification Value TWA YearHydrogen peroxide CAS no.: 7722-84-1 TWA (8h): 1,4 mg/m3

TWA (8h): 1 ppmOEL Short Term ValueValue: 2 ppmOEL Short Term ValueValue: 2,8 mg/m3

Acetic acid ...% CAS no.: 64-19-7 TWA (8h): 10 ppmTWA (8h): 25 mg/m3

TWA Year: 2011

Peracetic Acid CAS no.: 79-21-0

DNEL / PNECSubstance Hydrogen peroxide

DNEL Group: ConsumerRoute of exposure: Short term (acute) – Inhalation – Local effectValue: 1,93 mg/m³Comments: ECHA

Group: WorkerRoute of exposure: Long term (repeated) – Inhalation – Local effectValue: 1,4 mg/m³Comments: ECHA

Group: WorkerRoute of exposure: Short term (acute) – Inhalation – Local effectValue: 3 mg/m³Comments: ECHA

Group: ConsumerRoute of exposure: Long term (repeated) – Inhalation – Local effectValue: 0,21 mg/m³Comments: ECHA

Substance Acetic acid ...%

DNEL Group: WorkerRoute of exposure: Long term (repeated) – Inhalation – Local effectValue: 25 mg/m³Comments: ECHA

Group: WorkerRoute of exposure: Short term (acute) – Inhalation – Local effectValue: 25 mg/m³Comments: ECHA

Group: ConsumerRoute of exposure: Long term (repeated) – Inhalation – Local effectValue: 25 mg/m³Comments: ECHA

Group: ConsumerRoute of exposure: Short term (acute) – Inhalation – Local effectValue: 25 mg/m³



Comments: ECHA

Substance Peracetic Acid

DNEL Group: ProfessionalRoute of exposure: Kort sigt (akut) – Indånding – Lokal effektValue: 0,6 mg/m³Comments: ECHA

Group: ProfessionalRoute of exposure: Kort sigt (akut) – Indånding – Systemisk virkningValue: 0,6 mg/m³Comments: ECHA

Group: ProfessionalRoute of exposure: Kort sigt (akut) – Dermal – Lokal effektValue: 0,12% w/wComments: ECHA

Group: ProfessionalRoute of exposure: Lang sigt (gentages) – Indånding – Systemisk virkningValue: 0,6 mg/m³Comments: ECHA

Group: ProfessionalRoute of exposure: Lang sigt (gentages) – Indånding – Lokal effektValue: 0,6 mg/m³Comments: ECHA

Group: ConsumerRoute of exposure: Lang sigt (gentages) – Indånding – Lokal effektValue: 0,6 mg/m³Comments: ECHA

Group: ConsumerRoute of exposure: Lang sigt (gentages) – Indånding – Systemisk virkningValue: 0,6 mg/m³Comments: ECHA

Group: ConsumerRoute of exposure: Kort sigt (akut) – Indånding – Lokal effektValue: 0,3 mg/m³

Group: ConsumerRoute of exposure: Kort sigt (akut) – Oral – Lokal effektValue: 0,12% w/wComments: ECHA

Group: ConsumerRoute of exposure: Kort sigt (akut) – Indånding – Systemisk virkningValue: 0,6 mg/m³Comments: ECHA

8.2. Exposure controlsLimitation of exposure onworkplace

Personal protection equipment should be chosen according to the CEN standards and indiscussion with the supplier of the personal protective equipment.Mechanical ventilation may be required.An eye wash bottle must be available at the work site.



Safety signs

Eye / face protectionSuitable Eye Protection Wear approved safety goggles. (EN 166).

Hand protectionSkin-/ hand protection, longterm contact

Use protective gloves made of: Butyl rubber. Neoprene. Nitrile. (EN 374)

Hand protection comments Breakthrough time for nitrile rubber, neoprene and butyl rubber is approx. 3 hours. The recommendation is a qualified estimate based on knowledge of the components. Elasticgloves stretch when used as glove thickness and thus the breakthrough time reduced.The EN 374-3 standard test is performed at 23°C, but the practical temperature of the glove isapprox. 35°C.The breakthrough time of the different glove guides, is therefor reduced by a factor 3.

Skin protectionAdditional skin protectionmeasures

Wear apron or protective clothing in case of contact.Wear rubber footwear.

Respiratory protectionRespiratory protectionnecessary at

In case of inadequate ventilation use suitable respirator. Type A2/B2/P2 (EN 143/EN149)

Thermal hazardsThermal hazards See section 5.

Appropriate environmental exposure controlEnvironmental exposurecontrols

See section 6.

SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical propertiesPhysical state Liquid.

Colour Colourless.

Odour Characteristic. Slightly pungent odour.

Odour limit Comments: No data recorded.

pH Status: In delivery stateValue: ~ 1,0Comments: Acidity H2SO4 [% m/m]: 7,1 (CIPAC MT191)

Status: In aqueous solutionValue: ~ 4,0Consentration: 1 %

Status: In aqueous solution



Value: ~ 6,0Consentration: 0,2 %

Melting point / melting range Comments: Not relevant.

Boiling point / boiling range Comments: Not relevant.

Flash point Value: > 100 °CMethod: Pensky-Martens closed cup.Test reference: EC 440/2008 A.9

Evaporation rate Comments: Not relevant.

Flammability (solid, gas) Not relevant.

Explosion limit Comments: Not relevant.

Vapour pressure Comments: Not relevant.

Vapour density Comments: Not relevant.

Specific gravity Value: ~ 1,10 kg/l

Solubility Medium: WaterComments: Completely soluble in water.

Partition coefficient: n-octanol/water

Comments: Not relevant.

Spontaneous combustability Comments: Not relevant.

Decomposition temperature Value: > 60 °CMethod: Self Accelerating Decomposition TemperatureTest reference: OECD 113Comments: Non-metal container

Viscosity Value: < 50 mPa sMethod: Brookfield DV-II, LV-1, 100 rpm, 20°C

Explosive properties Not explosive.

Oxidising properties Strong oxidiser.

9.2. Other information

Other physical and chemical propertiesComments No data recorded.

SECTION 10: Stability and reactivity

10.1. ReactivityReactivity The product is a strong oxidizing agent that is stable under normal conditions. When heated

there is a risk of decomposition. In contact with incompatible materials there is a risk ofexothermic decomposition (self-increasing).

10.2. Chemical stabilityStability Stable under normal temperature conditions and recommended use.

10.3. Possibility of hazardous reactionsPossibility of hazardousreactions

Degradation products are water and oxygen, which in closed containers and pipes can causepressure rise and explosion hazard. The released oxygen can also be oxidizing. The product isstabilized. Reacts strongly with strong acids, bases, organic chemicals and certain metal



combinations. Reacts strongly with water. Liberates toxic gases when mixed with chlorinecontaining products.

10.4. Conditions to avoidConditions to avoid Decomposes when exposed to heat. Strong oxidiser – avoid contact with reducing agents.

Avoid exposure to high temperatures or direct sunlight. Chlorine containing products.

10.5. Incompatible materialsMaterials to avoid Flammable/combustible material. Alkali metals.

10.6. Hazardous decomposition productsHazardous decompositionproducts

Fire or high temperatures create: Oxygen.

Other informationOther Information Undiluted, the product may be corrosive to metals.

When used in the recommended dosages, contact time and temperature, the product iscompatible with acid-proof stainless steels.

SECTION 11: Toxicological information

11.1. Information on toxicological effectsSubstance Hydrogen peroxide

Acute toxicity Type of toxicity: AcuteEffect Tested: LD50Route of exposure: OralValue: 563,5 mg/kgTest reference: OECD Guideline 401Comments: ECHA

Type of toxicity: AcuteEffect Tested: LD50Route of exposure: DermalDuration: 24hValue: > 2000 mg/kgAnimal test species: RabbitComments: ECHA

Type of toxicity: AcuteEffect Tested: LC50Route of exposure: Inhalation.Duration: 4hValue: 1,5 mg/lComments: Mist;Supplier ATE.


Acute toxicity Type of toxicity: AcuteEffect Tested: LD50Route of exposure: OralDuration: single doseValue: 3530 mg/kg



Animal test species: ratTest reference: -Comments: ECHA

Type of toxicity: AcuteEffect Tested: LD50Route of exposure: DermalDuration: -Value: > 2000 mg/kgAnimal test species: rabbitTest reference: -Comments: HSDB

Type of toxicity: AcuteEffect Tested: LC50Route of exposure: Inhalation.Duration: 1 hValue: 5620 ppmAnimal test species: mouseTest reference: -Comments: ECHA


Acute toxicity Type of toxicity: AcuteEffect Tested: LD50Route of exposure: OralDuration: -Value: 100 mg/kg bw/dAnimal test species: -Test reference: -Comments: ATE, 01-2119531330-56-xxxx

Type of toxicity: AcuteEffect Tested: LD50Route of exposure: DermalDuration: -Value: 1100 mg/kg bw/dAnimal test species: -Test reference: -Comments: ATE, 01-2119531330-56-xxxx

Type of toxicity: AcuteEffect Tested: LC50Route of exposure: Inhalation. (mist)Duration: 4hValue: 0,512 mg/lAnimal test species: -Test reference: -Comments: Exp Supporting Acute toxicity: inhalation.013, 01-2119531330-56-xxxx

Type of toxicity: AcuteEffect Tested: LC50Route of exposure: Inhalation. (mist)Value: 0,204 mg/lComments: Calculated value, PAA Assesment report



Other toxicological data Toxicological tests on the product has not been performed.

Other information regarding health hazardsInhalation Vapours and spray mist may irritate throat and respiratory system and cause coughing.

Harmful by inhalation.

Skin contact Strongly corrosive. May cause deep tissue damage.

Eye contact Strongly corrosive. Causes severe burns. Immediate first aid is imperative.May cause permanent damage to the eyes, especially if the product is not washed awayIMMEDIATELY.

Ingestion Harmful if swallowed.May cause burns in mucous membranes, throat, oesophagus and stomach.

Sensitisation No evidence for respiratory nor skin sensitization.

Mutagenicity No evidence for germ cell mutagenicity.

Carcinogenicity No evidence for carcinogenicity.

Reproductive toxicity No evidence for reproductive toxicity.

Assessment of specific targetorgan toxicity RE, classification

No evidence for STOT-repeated exposure.

Assessment aspiration hazardclassification

No evidence for aspiration hazard.

Symptoms of ExposureSymptoms of overexposure No specific symptoms noted.

SECTION 12: Ecological information

12.1. ToxicitySubstance Acetic acid ...%

Acute aquatic, fish Value: 301 mg/lMethod: LC50


Acute aquatic, fish Value: 1,1 mg/L (LC50)Test duration: 96hSpecies: Lepomis macrochirusTest reference: Assessment report PAA


Acute aquatic, algae Value: 301 mg/lMethod: LC50


Acute aquatic, algae Value: 0,16 mg/L (EC50)Test duration: 72hSpecies: Selenastrum capricornutumTest reference: Assessment report PAA


Acute aquatic, Daphnia Value: 0,73 mg/L (EC50)Species: Daphnia MagnaTest reference: Assessment report PAA



Ecotoxicity The product contains a substance which is very toxic to aquatic organisms and which maycause long term adverse effects in the aquatic environment.Contains a substance (Aquatic Acute 1; H400 or Aquatic Chronic 1; H410) that falls within thescope of the multiplication factor rule.

Large amounts of the product may affect the acidity (pH-factor) in water with possible risk ofharmful effects to aquatic organisms.

Aquatic, comments No data available for the product.

12.2. Persistence and degradabilitySubstance Peracetic Acid

Biodegradability Value: > 70 %Method: OECD 301 ETest period: 28 d

Persistence and degradability The product is easily biodegradable.

12.3. Bioaccumulative potentialBioaccumulative potential The product is not bioaccumulating.

12.4. Mobility in soilMobility The product is water soluble and may spread in water systems.

12.5. Results of PBT and vPvB assessmentPBT assessment results Not Classified as PBT/vPvB by current EU criteria.

12.6. Other adverse effectsEnvironmental details,summation

Product is very toxic to aquatic organisms, may cause long-term adverseeffects in the aquatic environment.

SECTION 13: Disposal considerations

13.1. Waste treatment methodsSpecify the appropriatemethods of disposal

Do not empty into drains; dispose of this material and its container at hazardous or specialwaste collection point. Dispose of waste and residues in accordance with local authorityrequirements. -

EWC waste code EWC waste code: 0706 wastes from the MFSU of fats, grease, soaps, detergents,disinfectants and cosmeticsClassified as hazardous waste: Yes

EWL Packing EWC waste code: 0706 wastes from the MFSU of fats, grease, soaps, detergents,disinfectants and cosmeticsClassified as hazardous waste: Yes

Other Information When handling waste, consideration should be made to the safety precautions applying tohandling of the product. Waste code applies to product remnants in pure form.

SECTION 14: Transport information

14.1. UN number



ADR / RID / ADN 3149

IMDG 3149

ICAO/IATA 3149

14.2. UN proper shipping nameProper Shipping Name EnglishADR/RID/ADN

HYDROGEN PEROXIDE AND PEROXYACETIC ACID MIXTURE, STABILIZED

ADR / RID / ADN HYDROGEN PEROXIDE AND PEROXYACETIC ACID MIXTURE, STABILIZED

IMDG HYDROGEN PEROXIDE AND PEROXYACETIC ACID MIXTURE, STABILIZED

ICAO/IATA HYDROGEN PEROXIDE AND PEROXYACETIC ACID MIXTURE STABILIZED

Comments Self Accelerating Decomposition Temperature (SADT): >60 °C

14.3. Transport hazard class(es)ADR / RID / ADN 5.1 (8)

Class Code ADR / RID / ADN OC1

Subsidiary Risk ADR/RID/ADN (8)

IMDG 5.1 (8)

Subsidiary Risk IMDG (8)

ICAO/IATA 5.1 (8)

Subsidiary Risk ICAO (8)

14.4. Packing groupADR / RID / ADN II

IMDG II

ICAO/IATA II

14.5. Environmental hazardsADR / RID / ADN Danger label for "Environmental hazard" should be used if packagings with more than 5 liters

or 5 kilos are transported.

IMDG Danger label for "Environmental hazard" should be used if packagings with more than 5 litersor 5 kilos are transported.

IMDG Marine pollutant Yes

14.6. Special precautions for userSpecial safety precautions foruser

Not relevant.

14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC CodeProduct name HYDROGEN PEROXIDE AND PEROXYACETIC ACID MIXTURE STABILIZED

Additional information.ADR / RID / ADN Hazard label 5.1+8

IMDG Hazard label 5.1+8



ICAO /IATA Hazard label 5.1+8

ADR / RID - Other informationTunnel restriction code E

Transport category 2

Hazard no. 58

RID Other applicableinformation

58

IMDG / ICAO / IATA Other informationEmS F-H, S-Q

SECTION 15: Regulatory information

15.1. Safety, health and environmental regulations/legislation specific for the substance ormixtureOther Label Information For professional users only. As a general rule, persons under 18 years of age are not allowed

to work with this product. Users must be carefully instructed in the proper work procedure, thedangerous properties of the product and the necessary safety instructions.

Biocides Yes

Legislation and regulations The Management of Health and Safety at Work Regulations 1999 (SI 1999 No. 3242).Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals(REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC andrepealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC,93/67/EEC, 93/105/EC and 2000/21/EC, including amendments. The List of Wastes (England)(Amendment) Regulations 2005. (SI 2005 No. 895). EH40/2005, Workplace exposure limits2005, with amendments. REGULATION (EC) No 1272/2008 OF THE EUROPEANPARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification, labelling andpackaging of substances and mixtures, amending and repealing Directives 67/548/EEC and1999/45/EC, and amending Regulation (EC) No 1907/2006. REGULATION (EC) No 648/2004OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 31 March 2004 on detergents.REGULATION (EU) No 528/2012 OF THE EUROPEAN PARLIAMENT AND OF THECOUNCIL of 22 May 2012 concerning the making available on the market and use of biocidalproducts.

15.2. Chemical safety assessmentChemical safety assessmentperformed

No

SECTION 16: Other informationList of relevant H-phrases(Section 2 and 3).

H226 Flammable liquid and vapour.H242 Heating may cause a fire.H271 May cause fire or explosion; strong oxidiser.H272 May intensify fire; oxidiser.H290 May be corrosive to metals.H301 Toxic if swallowed.H302 Harmful if swallowed.



H312 Harmful in contact with skin.H314 Causes severe skin burns and eye damage.H318 Causes Serious eye damage.H330 Fatal if inhaled.H332 Harmful if inhaled.H335 May cause respiratory irritation.H400 Very toxic to aquatic life.H410 Very toxic to aquatic life with long lasting effects.

Classification according toRegulation (EC) No 1272/2008[CLP / GHS]

Ox. Liq. 2; H272Met. Corr. 1; H290Skin Corr 1B; H314Eye Dam. 1; H318Acute tox. 4; H302STOT SE3; H335Aquatic Chronic 1; H410Acute tox. 4; H332

Training advice No particular training or education is required but the user must be familiar with this SDS.Users must be carefully instructed in the proper work procedure, the dangerous properties ofthe product and the necessary safety instructions.

Additional information READY-TO-USE MIXTURE: 0,2 - 1%When used in the recommended dosages, contact time and temperature, the product iscompatible with acid-proof stainless steels.

Information which has beenadded, deleted or revised

Change to Sections: 1, 2, 3, 4, 7, 8, 9, 11, 12, 13, 16

Prepared by MP



oxivit aktiv plus - kemi · company name novadan aps postal address platinvej 21 postcode dk-6000...

Documents