or revise artwork purchase date. impact’s responsibility ... · folds to 80 x 100 mm 6 3 do not...

8
Collapsible Reflector Discs INSTRUCTIONS

Upload: others

Post on 25-Aug-2020

0 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: OR REVISE ARTWORK purchase date. Impact’s responsibility ... · Folds to 80 x 100 mm 6 3 DO NOT EDIT OR REVISE ARTWORK We will not approve any artwork which has been altered by

Collapsible Re�ector Discs

INSTRUCTIONSwww.impactstudiolighting.com

impact

Warranty

Impact provides a limited warranty that this product is free from defects in materials and workmanship to the original purchaser under normal use for a period of one (1) year from the original purchase date. Impact’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at its option, of any product which fails during normal consumer use. This warranty does not extend to damage or failure which results from misuse, neglect, accident, alteration, abuse, improper installation or maintenance. To obtain a replacement during the time of this warranty, please return the defective item with proof of purchase along with an RMA number to the place of purchase. This warranty gives you speci�c legal rights, and you may also have other rights which vary from state to state.

DO NOT EDIT OR REVISE ARTWORK

We will not approve any artwork which has been altered by the vendor

FORWARD YOUR PROOFSto [email protected]

FOR APPROVAL BEFORE FINAL PRODUCTIONDO NOT BEGIN PRODUCTION

WITHOUT PRIOR APPROVAL OF PROOFS

8-page manual to be inserted into carry bag

(for collapsible DISC re�ectors only)

Folds to 80 x 100 mm

8 1

Page 2: OR REVISE ARTWORK purchase date. Impact’s responsibility ... · Folds to 80 x 100 mm 6 3 DO NOT EDIT OR REVISE ARTWORK We will not approve any artwork which has been altered by

2

• Practical to use in studio or on location

• Folds into a compact circle for easy transport

• Free carry bag included

All photos are for illustrative purposes only.

Stands are not included with Impact Collapsible Backgrounds unless purchased as a kit.

The two sides will pass one in front of the other until they are stacked together. The re�ector will now �t in its carry bag.

Features

DO NOT EDIT OR REVISE ARTWORK

We will not approve any artwork which has been altered by the vendor

FORWARD YOUR PROOFSto [email protected]

FOR APPROVAL BEFORE FINAL PRODUCTIONDO NOT BEGIN PRODUCTION

WITHOUT PRIOR APPROVAL OF PROOFS

8-page manual to be inserted into carry bag

(for collapsible DISC re�ectors only)

Folds to 80 x 100 mm

2 7

Page 3: OR REVISE ARTWORK purchase date. Impact’s responsibility ... · Folds to 80 x 100 mm 6 3 DO NOT EDIT OR REVISE ARTWORK We will not approve any artwork which has been altered by

3

Introduction

Thank you for choosing the Impact Collapsible Re�ector Disc. Impact re�ectors are practical for use in the studio or on location. They come in many colors and sizes. Visit our web site at www.impactstudiolighting.com to see them all.

To change the re�ector color on a 5-in-1 or a 7-in-1 model Impact Collapsible Re�ector Disc, unzip the cover of the re�ector to access the color combinations inside.

Collapsing a re�ector so it can �t into its storage bag is very tricky. It will take some practice to get it right. Follow these instructions carefully.

Continue twisting while pulling the two sides together.

Folding Instructions (cont.)

Folds to 80 x 100 mm

6 3

DO NOT EDIT OR REVISE ARTWORK

We will not approve any artwork which has been altered by the vendor

FORWARD YOUR PROOFSto [email protected]

FOR APPROVAL BEFORE FINAL PRODUCTIONDO NOT BEGIN PRODUCTION

WITHOUT PRIOR APPROVAL OF PROOFS

8-page manual to be inserted into carry bag

(for collapsible DISC re�ectors only)

Page 4: OR REVISE ARTWORK purchase date. Impact’s responsibility ... · Folds to 80 x 100 mm 6 3 DO NOT EDIT OR REVISE ARTWORK We will not approve any artwork which has been altered by

4

Twist the re�ector into a �gure-eight shape.

Folding Instructions

Grasp the re�ector disc as shown above. Note that the thumbs are on opposite sides of the disc.

Folds to 80 x 100 mm

4 5

DO NOT EDIT OR REVISE ARTWORK

We will not approve any artwork which has been altered by the vendor

FORWARD YOUR PROOFSto [email protected]

FOR APPROVAL BEFORE FINAL PRODUCTIONDO NOT BEGIN PRODUCTION

WITHOUT PRIOR APPROVAL OF PROOFS

8-page manual to be inserted into carry bag

(for collapsible DISC re�ectors only)

Page 5: OR REVISE ARTWORK purchase date. Impact’s responsibility ... · Folds to 80 x 100 mm 6 3 DO NOT EDIT OR REVISE ARTWORK We will not approve any artwork which has been altered by

5

Twist the re�ector into a �gure-eight shape.

Folding Instructions

Grasp the re�ector disc as shown above. Note that the thumbs are on opposite sides of the disc.

Folds to 80 x 100 mm

4 5

DO NOT EDIT OR REVISE ARTWORK

We will not approve any artwork which has been altered by the vendor

FORWARD YOUR PROOFSto [email protected]

FOR APPROVAL BEFORE FINAL PRODUCTIONDO NOT BEGIN PRODUCTION

WITHOUT PRIOR APPROVAL OF PROOFS

8-page manual to be inserted into carry bag

(for collapsible DISC re�ectors only)

Page 6: OR REVISE ARTWORK purchase date. Impact’s responsibility ... · Folds to 80 x 100 mm 6 3 DO NOT EDIT OR REVISE ARTWORK We will not approve any artwork which has been altered by

6

Introduction

Thank you for choosing the Impact Collapsible Re�ector Disc. Impact re�ectors are practical for use in the studio or on location. They come in many colors and sizes. Visit our web site at www.impactstudiolighting.com to see them all.

To change the re�ector color on a 5-in-1 or a 7-in-1 model Impact Collapsible Re�ector Disc, unzip the cover of the re�ector to access the color combinations inside.

Collapsing a re�ector so it can �t into its storage bag is very tricky. It will take some practice to get it right. Follow these instructions carefully.

Continue twisting while pulling the two sides together.

Folding Instructions (cont.)

Folds to 80 x 100 mm

6 3

DO NOT EDIT OR REVISE ARTWORK

We will not approve any artwork which has been altered by the vendor

FORWARD YOUR PROOFSto [email protected]

FOR APPROVAL BEFORE FINAL PRODUCTIONDO NOT BEGIN PRODUCTION

WITHOUT PRIOR APPROVAL OF PROOFS

8-page manual to be inserted into carry bag

(for collapsible DISC re�ectors only)

Page 7: OR REVISE ARTWORK purchase date. Impact’s responsibility ... · Folds to 80 x 100 mm 6 3 DO NOT EDIT OR REVISE ARTWORK We will not approve any artwork which has been altered by

7

• Practical to use in studio or on location

• Folds into a compact circle for easy transport

• Free carry bag included

All photos are for illustrative purposes only.

Stands are not included with Impact Collapsible Backgrounds unless purchased as a kit.

The two sides will pass one in front of the other until they are stacked together. The re�ector will now �t in its carry bag.

Features

DO NOT EDIT OR REVISE ARTWORK

We will not approve any artwork which has been altered by the vendor

FORWARD YOUR PROOFSto [email protected]

FOR APPROVAL BEFORE FINAL PRODUCTIONDO NOT BEGIN PRODUCTION

WITHOUT PRIOR APPROVAL OF PROOFS

8-page manual to be inserted into carry bag

(for collapsible DISC re�ectors only)

Folds to 80 x 100 mm

2 7

Page 8: OR REVISE ARTWORK purchase date. Impact’s responsibility ... · Folds to 80 x 100 mm 6 3 DO NOT EDIT OR REVISE ARTWORK We will not approve any artwork which has been altered by

One-Year Limited WarrantyThis IMPACT product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Impact Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Impact along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.impactstudiolighting.com or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.www.gradusgroup.com

IMPACT is a registered trademark of the Gradus Group. © 2014 Gradus Group LLC. All Rights Reserved.

GG2