optical fibre cables - generalcable.com document… · optical fibre cables silec cable references...
TRANSCRIPT
OPTICAL FIBRE CABLESfor very-high bit transmission and FTTx networks
OPTICAL FIBRE CABLESSILEC CABLE REFERENCES AND KNOW-HOW
Since 1983, Silec Cable has successfully supplied the major telecom operators, contractors and distributors in more than 70 countries.
All cables described in the present document can accomodate all optical fi bre types available on the market (singlemode G 652 d - singlemode G 657x with small bending radius - singlemode G 655 and G 656 for DWDM - multimode 50/125 and 62.5/125 OM1, OM2 OM3 and OM4 types).The cable designs and the controlled manufacturing processes ensure maintaining the optical characteristics of the bare fi bres (for example : no modifi cation of attenuation and PMD values).
Upon request, Silec Cable can offer a technical assistance : choice of solutions, information about laying and jointing of optical fi bre cables, etc…
All Silec optical fi bre cables can be installed using all existing laying and jointing techniques with no need of specifi c tools or devices.
COMPREHENSIVE RANGE> ultra-compact cables (μSHEATH® (*), μSHEATH® ACCESS, μSHEATH® MS and μCables) optimized to
minimize installation and jointing costs> standard cables (loose tubes and UNIGAINE)> all applications : long haul, distribution networks, FTTx networks, and industrial purposes (installation in
ducts, troughs, sewers, direct burial, building front, indoor, tunnels, aerial,…) > all environments
(*) μSHEATH® is a Silec Cable trademark.
2
FTTx NETWORKSOUTSIDE CABLE PLANT
TRUNK
CABLES
ACCESS
CABLES
DISTRIBUTION
CABLES
RepartitionOptical Node
Flexibility PointJointing Repartition
BranchingPoint
TRUNK CABLES DISTRIBUTION CABLES ACCESS CABLES
μSHEATH® CABLES (up to 864 OF)
> Non armoured : ducts> Armoured (corrugated steel or glass yarns) :
troughs, sewers, direct burial> Multi-purpose : all application and
aerial installation
μSHEATH® ACCESS CABLES (up to 288 OF)
> Non armoured : ducts and micro-ducts
μCABLES (up to 12 OF)
> Non armoured : micro-ducts & building fronts> Multi-purpose : all application and
aerial installation
3
μSHEATH® CABLES FOR LONG HAUL AND FTTx NETWORKSINNOVATIVE AND COST-EFFICIENT (OUTDOOR CABLE PLANT)
μSHEATH® CABLES ARE SUITABLE FOR ALL TELECOMMUNICATION NETWORKS :
LONG HAUL BACKBONES, METRO RINGS, DISTRIBUTION AND LOCAL ACCESS.
As compared to conventional cables, the μSHEATH® design brings unique benefi ts inducing signifi cant time- and cost-savings at all levels (engineering, civil works, laying, jointing), e.g. :> suitable to any type of fi bre and environment,> ultra-compactness, lightweight, handleability,> modular design and easy entry/fi bre access (both at cable end and mid-span),> suitable to all current laying and jointing techniques,> suitable to individual and mass splicing.
Coloured optical fi bres
Jelly fi lled coloured μSHEATH® unit
Bundle of units forming a coloured «super-unit» (if fi bre-count > 288) + water- blocking swellable elements
Tape (optional)
Dielectric strength members embedded in a black PE sheath (*) for ducts and armoured cables or in an ivory LSZH sheath (*) for indoor cables
Ripcords (optical)
Corrugated steel tape or glass yarns for armoured cables
Black HDPE sheath (*) for armoured cables
(*) For specifi c requirements : please contact us.
4
Fibre-count (1) 12 24 - 36 48 60 - 72 96 - 144 156 - 216 288 456 876
Weight kg/km 95 122 150 190 242 290 390 560 750
Outer diameter mm 9.6 11.0 12.5 14.3 16.5 18.0 21.5 26.5 31.0
Bending radius mm 105 130 150 175 200 215 265 345 405
Max. installation tensile load daN 90 135 170 235 300 375 500 650 830
Delivery length (2) km 6 km 4 km Upon request
STEEL TAPE ARMOURED μSHEATH® CABLES
Fibre-count (1) 12 24 - 36 48 60 - 72 96 - 144 156 - 216 288 456 876
Weight kg/km 21 36 48 67 95 125 175 275 420
Outer diameter mm <_ 5.5 <_ 7.0 <_ 8.0 <_ 10.0 <_ 11.5 <_ 13.0 <_ 16.0 <_ 20.0 <_ 25.0
Bending radius mm 55 70 80 100 115 130 160 200 245
Max. installation tensile load daN 70 120 160 255 330 415 600 790 1040
Delivery length (2) km 12 km 8 km Upon request
DUCT DIELECTRIC μSHEATH® CABLES
Fibre-count (1) 12 24 - 36 48 60 - 72 96 - 144 156 - 216 288 456 876
Weight kg/km 65 90 110 140 180 215 305
Upon request
Outer diameter mm 9.2 10.6 11.6 13.5 15.5 17.0 21.2
Bending radius mm 110 130 150 170 195 215 260
Max. installation tensile load daN 225 320 405 545 670 820 1035
Delivery length (2) km 12 km 8 km 6 km 4 km
GLASS YARNS ARMOURED μSHEATH® CABLES
MULTI-PURPOSE (aerial, direct burial, ducts,…)
μSHEATH® CABLES (rigid fl at FRP armoured)
Fibre-count (1) 12 24 - 36 48 60 - 72 84 - 144 288
Weight kg/km 106 135 160 190 255 275
Outer diameter mm 11.0 12.7 13.6 15.1 17.4 18.5
Bending radius mm 145 165 180 200 230 240
Max. installation tensile load (*) daN 550 700 780 930 1160 1450
Delivery length (2) km <_ 5 km
HALOGEN-FREE ARMOURED μSHEATH® CABLEPROTECTED AGAINST FIRE HAZARDS
Fibre-count (1) Up to 48 60 up to 72 84 up to 216 228 up to 288
Weight kg/km 210 320 400 520
Outer diameter mm 12.8 16.1 18.4 21.4
Bending radius mm 165 210 240 280
Max. installation tensile load daN 150 237 360 470
Delivery length (2) km 2 or 4 km
(1) The maximum fi bre-count is given for a 12 modularity. Other fi bre-counts and modularities possible upon request.(2) Other delivery lengths possible depending on fi bre types and reels required by customer.These cables can be tailored for specifi c requirements or to comply with Operator’s Technical Specifi cations. Please contact us.
(*) for underground installation.
5
μSHEATH® ACCESS CABLES, BLOWN μSHEATH® MODULE and μCABLES FOR FTTx NETWORKS(OUTDOOR CABLE PLANT)
μSHEATH® ACCESS CABLES AND BLOWN μSHEATH® MODULE FOR FTTx NETWORKS
> μSHEATH® ACCESS cables are downsized μSHEATH® cables targeting low cost « last mile ».> The Blown μSHEATH® module is a micro-cable for indoor and outdoor installation, designed for subscriber
access.> μCables are central tube micro-cables containing up to 12 optical fi bres optimized for low-cost subscriber
access and for all applications (ducts, building fronts, indoor, plinths,…).
These 3 cable families are optimized for laying in micro-ducts.
μSHEATH® ACCESS CABLES FOR MICRO-DUCTSSTANDARD μSHEATH ACCESS CABLES
Fibre count
(1)
Weight,
kg/km
Outer diameter (4),
mm
Bending radius,
mm
Maximum
installation
tensile load, daN
Delivery length (2),
km
<_ 24 11 <_ 4.0 40 20 6
<_ 48 25 <_ 6.0 60 45 6
<_ 96 45 <_ 8.0 80 95 4
<_ 144 63 <_ 9.5 100 125 4
<_ 288 95 <_ 12.0 120 190 4
μSHEATH® ACCESS CABLES FOR MICRO-DUCTSμSHEATH ACCESS II CABLES
Fibre count
(1)
Weight,
kg/km
Outer diameter (4),
mm
Bending radius,
mm
Maximum
installation
tensile load, daN
Delivery length (2),
km
<_ 72 25 <_ 6.0 60 50 4
<_ 96 40 <_ 8.0 80 60 4
<_ 144 Please contact us
Coloured optical fi bres
Jelly fi lled coloured μSHEATH® unit containing up to 12 optical fi bres
Dielectric strength members
Tape (optional)
Black HDPE sheath (3)
Coloured optical fi bresJelly fi lled coloured μSHEATH® unit containing up to 12 optical fi bres
Dielectric strength membersTape (optional)
Ripcord (optional)Black sheath (3)
6
(1) The maximum fi bre-count is given for a 12 modularity. Other fi bre-counts and modularities possible upon request.(2) Other delivery lengths possible depending on fi bre types and reels required by customer.(3) For specifi c requirements : please contact us.(4) For other diameter values : please contact us.These cables can be tailored for specifi c requirements or to comply with Operator’s Technical Specifi cations. Please contact us.
BLOWN μSHEATH® MODULE (MICRO-DUCTS)
Fibre countWeight,
kg/km
Outer diameter (4),
mm
Bending radius,
mm
Maximum
installation tensile
load, daN
Watertightness Halogen freeDelivery length (2),
km
1 up to 12 4 2.0 30 7 YES YES <_ 2.05
μCABLES(DUCTS, BUILDING-FRONT,…)
Fibre countWeight,
kg/km
Outer diameter (4),
mm
Bending radius,
mm
Maximum
installation tensile
load, daN
Watertightness Stapling abilityDelivery length (2),
km
1 up to 12 13 3.8 40 23 YES YES <_ 5
μCABLESMULTI-PURPOSE CABLE (AERIAL, DUCTS, BUILDING-FRONT,…)
Fibre countWeight,
kg/km
Outer diameter (4),
mm
Bending radius,
mm
Maximum
installation tensile
load, daN
Watertightness SpanDelivery length (2),
km
1 up to 12 26 5.0 40 140 YES 40 up to 60 M <_ 4.10
Coloured optical fi bresStrength members (models < 12 fi bres)Filling compound Coloured inner sheathOuter transparent sheath with low friction coeffi cient
Coloured optical fi bresFilling compound
Tube
Dielectric strength members
Black HDPE sheath (3)
Coloured optical fi bresFilling compoundTubeDielectric strength membersRipcordBlack HDPE sheath (3)
7
FTTx NETWORKSBUILDING CABLE PLANT
1 DISTRIBUTION CABLE
2 LEVEL 0 / BUILDING CLOSURE
3 RISER CABLE
Flame-retardant, halogen-free μSHEATH® cable up to 288 OFor Flame-retardant, halogen-free μSHEATH® MS cable (optimized for mid-span access) up to 144 OFor Flame-retardant, halogen-free μCable up to 12 OFor Blown μSHEATH® module up to 12 OFor Outdoor cable suitable for building front installation
4 FLOOR CLOSURE
5 SUBSCRIBER CABLE
Flame-retardant, halogen-free subscriber μCable with 1, 2 or 4 OFor Blown μSHEATH® module with 1, 2 or 4 OF
6 SUBSCRIBER PLUG AND/OR HOME CABLING ACCORDING TO APPLICABLE STANDARDS
12
3
4
5
6
8
STANDARD μSHEATH® CABLES, μSHEATH® MS CABLES AND μCABLES FOR FTTX NETWORKS (INDOOR CABLE PLANT)
STANDARD μSHEATH® INDOOR CABLES FOR FTTX NETWORKS
Standard μSHEATH® indoor cables are dedicated to classical short-length mid-span access applications. They can be optimized for low bending radius applications requiring G 657 single mode optical fi bres.
(1) The maximum fi bre-count is given for a 12 modularity. Other fi bre-counts and modularities possible upon request.(2) Other delivery lengths possible depending on fi bre types and reels required by customer.(3) Smaller bending radius possible with G 657 optical fi bres.(4) For other diameter values : please contact us.These cables can be tailored for specifi c requirements or to comply with Operator’s Technical Specifi cations. Please contact us.
Fibre-count (1) 12 24 - 36 48 60 - 72 96 - 120 144 - 216 288 456 876
Weight kg/km 26 51 68 130 155 170 255
Upon request
Outer diameter mm <_ 5.0 <_ 7.0 <_ 8.0 <_ 11.0 <_ 13.0 <_ 13.0 <_ 16.0
Bending radius mm 50 70 80 110 130 130 160
Max. installation tensile load daN 65 115 155 250 395 420 585
Delivery length (2) km 12 km 8 km 6 km
INDOOR HALOGEN FREE (LSZH)
μSHEATH® CABLES
INDOOR SUBSCRIBER
FLAT μCABLE
INDOOR SUBSCRIBER
μCABLE
μSHEATH®
SUBSCRIBER CABLE
INDOOR
μCABLE
Fibre-count 1 up to 4 1 up to 4 1 up to 4 1 up to 12
Weight, kg/km 11 13 18 16
Outer diameter, mm (4) 2.5 x 3.5 3.2 4.2 3,8
Bending radius (3), mm 25 30 40 40
Max. installation tensile load, daN 35 15 40 20
Fire performance (LSZH) (3) YES YES YES YES
Stapling ability YES YES YES YES
Watertightness OPTIONAL OPTIONAL YES OPTIONAL
Delivery length (2), km <_ 5 km <_ 5 km <_ 5 km <_ 5 km
μSHEATH® MS CABLES FOR FTTx NETWORKS
μSHEATH® MS cables are dedicated to long-length mid-span access applications. They can be optimized for low bending radius applications requiring G 657 single mode optical fi bres.
Fibre count (1)Weight,
kg/km
Outer
diameter (4),
mm
Bending
radius,
mm (3)
Maximum
installation
tensile load, daN
Delivery
length (2),
km
<_ 24 Please contact us<_ 48 61 8.5 85 60 6<_ 96 80 10.5 105 80 4<_ 144 143 14.0 140 150 4<_ 288 Please contact us
1. μSHEATH® MS cable2. Subscriber μCable3. μSHEATH® module
inside a micro-duct4. Splice(s)5. Subscriber plug6. Protection & routing7. Closure8. Floor closure
μSHEATH® MS CABLES FOR MID-SPAN ACCESS
μCABLES AND μSHEATH® SUBSCRIBER CABLES
These 2 cable families can be optimized for low bending radius applications requiring G 657 single mode optical fi bres.
9
STANDARD LOOSE TUBE CABLESAND UNIGAINE CABLES
Silec manufactures standard loose tube cables for all applications (duct, direct burial, tunnels, indoor, aerial,…) and an optimized family of central tube cables (UNIGAINE cables).
(1) The maximum fibre-count is given for a 12 modularity. Other fibre-counts and modularities possible upon request.
(2) Other delivery lengths possible depending on fibre types and reels required by customer.
(3) Other values possible.These cables can be tailored for specific requirements or to comply with Operator’s
Technical Specifi cations. Please contact us.
LOOSE TUBE CABLES
FOR DUCTS
Fibre-count
(1)
Weight,
kg/km
External
diameter,
mm
Bending
radius,
mm
Max. installation
tensile load,
daN (3)
Delivery
length (2),
km
6 up to 72 105 11.5 115 315 / 105 <_ 10 km
up to 144 210 17.0 170 630 / 210 <_ 7 km
GLASS YARNS ARMOURED LOOSE TUBE
CABLES FOR DIRECT BURIAL AND DUCTS
Fibre-count
(1)
Weight,
kg/km
External
diameter,
mm
Bending
radius,
mm
Max. installation
tensile load,
daN (3)
Delivery
length (2),
km
6 up to 72 170 14.5 200 660 / 220 Consult us
up to 144 Consult us
STEEL ARMOURED LOOSE TUBE CABLES
Fibre-count
(1)
Weight,
kg/km
External
diameter,
mm
Bending
radius,
mm
Max. installation
tensile load,
daN (3)
Delivery
length (2),
km
6 up to 72 220 15.5 200 200 / 100 Consult us
up to 144 380 20.5 240 300 / 150 Consult us
MULTIPURPOSE (AERIAL, DUCTS, BURIAL)
LOOSE TUBE CABLES (FLAT FRP ARMOUR)
Fibre-count
(1)
Weight,
kg/km
External
diameter,
mm
Bending
radius,
mm
Max. installation
tensile load,
daN
Delivery
length (2),
km
6 up to 72 230 16.0 200 1350 / 770 Consult us
up to 144 Consult us
LOOSE TUBES CABLES FOR TUNNELS
Fibre-count
(1)
Weight,
kg/km
External
diameter,
mm
Bending
radius,
mm
Max. installation
tensile load,
daN
Delivery
length (2),
km
6 up to 72 220 12.5 150 200 / 100 Consult us
up to 144 Consult us
FIGURE « 8 » AERIAL LOOSE TUBE CABLES
Fibre-count
(1)
Weight,
kg/km
External
diameter,
mm
Bending
radius,
mm
Max. installation
tensile load,
daN (3)
Delivery
length (2),
km
6 up to 72 160 11 x 19 150 250 (permanent) Consult us
up to 144 Consult us
ALL DIELECTRIC SELF-SUPPORTING
(ADSS) CABLES
Fibre-count
(1)
Weight,
kg/km
External
diameter,
mm
Bending
radius,
mm
Max. installation
tensile load,
daN
Delivery
length (2),
km
6 up to 72 Consult us (design & performance optimizedversus climatic conditions and span up to 250 m or more)up to 144
LOOSE TUBE CABLES FOR LONG HAUL NETWORKS
These cables are used for transport networks and long haul networks.Silec cable range includes the following models : dielectric cables for ducts, dielectric cables for direct burial, multi-purpose dielectric cables, steel armoured cables, cables protected against fi re hazards (tunnels), self-supported and ADSS cables for aerial installation, underwater cables, and dual-purpose cables with metallic conductors.
10
CABLE
FOR DUCTS
INDOOR /
OUTDOOR CABLE
(LSZH)
STEEL TAPE
ARMOURED
CABLE
GLASS YARNS
ARMOURED
CABLE
DIELECTRIC UNIGAINE® TT CABLES
FOR DUCTS,
DIRECT BURIAL,
WIND-FARMS,…
FOR INDOOR /
OUTDOOR
INSTALLATION
(LSZH)
Fibre-count 1 up to 12 1 up to 12 1 up to 12 1 up to 12 1 up to 12 1 up to 12
Weight kg/km 36 50 120 75 35 50
Outer diameter mm <_ 6.5 <_ 6.5 10.4 9.4 6.5 6.5
Bending radius mm 70 70 135 120 65 65
Max. installation tensile load daN 60 60 120 265 95 90
Crush test daN/cm 30 20 45 40 45 20
Impact test N.m 10 5 20 20 30 5
Watertightness YES OPTIONAL YES YES YES OPTIONAL
Delivery length (1) km 1 up to 10 km 1 up to 10 km 1 up to 6 km 1 up to 6 km 1 up to 6 km 1 up to 6 km
Coloured optical fi bresJelly fi lled loose tube containing up to 12 fi bresDielectric strength members
Black HDPE sheath (2) for outdoor cables (armoured or not) or ivory LSZH sheath (2) for indoor cables
Corrugated steel tape or glass yarns for armoured cablesBlack HDPE sheath (2) for armoured cables
Colour-coded optical fi bresJelly fi lled loose tube containing up to 12 optical fi bres
Glass yarns
Dielectric strength members
Black HDPE or LSZH sheath (2)
(1) Other delivery lengths possible depending on fi bre types and reels required by customer.(2) For specifi c requirements : please contact us.These cables can be tailored for specifi c requirements or to comply with Operator’s Technical Specifi cations. Please contact us.
OTHER CABLES FOR INSTALLATION ON AERIAL HIGH-VOLTAGE POWER-LINESCABLES FOR WRAPPING (COE) AROUND HIGH / EXTRA-HIGH VOLTAGE AERIAL POWER LINES
Fiber optic cable wrapping on phase or ground wires of aerial power lines (from low voltage to very-high voltage) is an interesting alternative for very-high bit rate communications in rural areas or between cities. Compared with traditionnal solutions (all dielectric self supporting cables,…), this solution brings cost-savings : no need of new civil-works, no need of poles’ reinforcement,…
OPTICAL PHASE GROUND WIRE (OPGW) FOR HIGH / EXTRA-HIGH VOLTAGE AERIAL POWER LINES
General Cable group can offer a large range of OPGW cables up to 144 optical fi bres.
UNIGAINE CABLESUNIGAINE CABLES FOR LONG HAUL NETWORKS AND INDUSTRIAL APPLICATIONS.
UNIGAINE CABLES ARE DOWNSIZED AND COST-EFFICIENT CENTRAL TUBE CABLES CONTAINING UP TO 12 OPTICAL FIBRES.
EXAMPLE : GLASS YARNS ARMOURED CABLE
11
www.sileccable.com
TO CONTACT US
ALGIERSTel. : +213 033 75 43 21/[email protected]
ANGOLATel. : +244 2 380076/7/8/9/[email protected]
EGYPTTel. : +202 263 [email protected]
FRANCETel. : +33 1 41 98 09 [email protected]
GERMANYTel. : +49 4731 82 [email protected]
Tel. : +49 6995 93 243 [email protected]
ITALYTel. : +39 02 660 [email protected]
NORWAYTel. : +47 64 95 59 00fi [email protected]
PORTUGALTel. : +351 219 678 [email protected]
RUSSIATel. : +7 495 617 00 [email protected]
SPAINTel. : +34 93 227 97 [email protected]
UNITED ARAB EMIRATESTel. : +971 2 [email protected]
UNITED KINGDOMTel. : +44 1604 521 [email protected]