operator fundamentals online - rational acoustics · session 3: pt. 1: using the data bar pt. 2...

© Rational Acoustics LLC 2020 - All rights reserved

Session 3:

Pt. 1: Using the Data Bar

Pt. 2 Intro to Smaart Di v2

Operator Fundamentals Online

Smaart Operator Fundamentals OnlineSession 1

Slide 2

Jamie Anderson◦ President, Director of Training◦ [email protected]

Chris Tsanjoures◦ Smaart Product Manager, Instructor◦ [email protected]

Michael Lawrence◦ Application Support Specialist, Instructor ◦ [email protected]

Gavin Caanan◦ Training Coordinator◦ [email protected]


mailto:[email protected]





Slide 3


Rational Acoustics LLC32 Crabtree Ln

Woodstock, CT 06281USA

+1 (860) 928-7828

www.RationalAcoustics.com

[email protected]

[email protected]

[email protected]

http://www.rationalacoustics.com/





Slide 4


The Data Bar (same in v8 & Di v2)◦ Plot Focus = Data Shown

◦ Smaart Data – Location – Data Type – Moving Data

◦ Trace Info

◦ The Session Folder

Intro to Smaart Di v2 ◦ Di v2 Configuration

◦ The Control Bar: v8 vs Di v2

◦ Selecting Inputs

◦ Saving & Recalling TF Pairs


Slide 5


Smaart Data◦ Plot Focus = Data Shown

Spec. Plots: RTA

Spectrograph

TF Plots:Magnitude

PhaseLive IR

Data Bar & Control Bar reflect data type of plot in focus!

Show Hide Hotkey = [B]


Slide 6



◦ Location

Documents -> Smaart v8 -> Traces


Slide 7


Smaart Data◦ Plot Focus = Data Shown◦ Location – Data Type


Traces Folder

Spectrum Folder(s) w/.srf

Transfer Function Folder(s) w/.trf

Legacy data (individual traces) can be imported to v8 (not .rgp files)


Slide 8


Smaart Data◦ Plot Focus = Data Shown◦ Location – Data Type – Moving Data (in the program or on the HD)


Traces Folder

Spectrum Folder(s) w/.srf

Transfer Function Folder(s) w/.trf

Legacy data (individual traces) can be imported to v8 (not .rgp files)


Slide 9



◦ Location

◦ Trace Info

Display Functions vs. Measurement Settings


Slide 10



◦ Location

◦ Trace Info

◦ The Session Folder

Hamburger Menu > New Session Folder

www.rationalacoustics.com



Slide 12


Dual-Channel Interface

Measure any 2 spectrum inputs at a time, or one Transfer Function pair

Real Time Mode only – Limited SPL – No Impulse Response Mode


Slide 13



Slide 14


Di v2 IO Configuration – (almost) the same as v8!

Di V2 : All inputs selected by default default

V8 : No inputs selected by default


Slide 15


Q) Why select all inputs by default?

A) So that you never need to leave the main UI - Simplicity


Slide 16


Spectrum Input selection determines Transfer Function Pair

Green = Measurement

Blue = Reference

Simplicity - 2 input IO device

Input 1 = Measurement Mic

Input 2 = Reference (Noize)


Slide 17


Creating multiple TF Pairs – Capture Pair Icon

www.rationalacoustics.com
