Slide 1

Slide 2

Slide 3

OneTwoThree FourFiveSix SevenEightNine End

Slide 4

Click on the arrow below to continue.

Slide 5

Click on the arrow below and try again

Slide 6

Click on the arrow below and try again

Slide 7

Click on the arrow below and try again

Slide 8

Click on the arrow below and try again

Slide 9

Click on the arrow below and try again

Slide 10

Click on the arrow below and try again

Slide 11

Click on the arrow below and try again

Slide 12

Click on the arrow below and try again

Slide 13

Click on the arrow below and try again

Slide 14

Which alignment angle is NOT adjustable? 1. Camber Camber 2. Caster Caster 3. Steering Axis Inclination Steering Axis Inclination

Slide 15

Front wheel toe is adjusted by using. 1. Shims Shims 2. Tie rod sleeves Tie rod sleeves 3. Adjustment cams Adjustment cams

Slide 16

The three major components of the steering system are: Steering column, steering gear and 1. Steering hanger beamSteering hanger beam 2. Steering linkageSteering linkage 3. Steering toeSteering toe

Slide 17

An adjusting sleeve is attached to the. 1. Tie rod Tie rod 2. Idler arm Idler arm 3. Pitman arm Pitman arm

Slide 18

When the rear of the front tires are closer together than the front, the steering has. 1. Bent parts Bent parts 2. Positive scrub radius Positive scrub radius 3. Toe out Toe out

Slide 19

Unsprung weight is the weight of the. 1. Wheels, tires and moving parts of the suspension. Wheels, tires and moving parts of the suspension. 2. Vehicle, minus the wheels, tires and moving parts of the suspension. Vehicle, minus the wheels, tires and moving parts of the suspension. 3. Vehicle, without any load/passengers. Vehicle, without any load/passengers.

Slide 20

McPherson strut suspensions use what type of springs? 1. Leaf Leaf 2. Torsion bar Torsion bar 3. Coil Coil

Slide 21

Backward and forward tilt of the spindle support is referred to as? 1. Camber Camber 2. Steering axis inclination Steering axis inclination 3. Caster Caster

Slide 22

Inward or outward tilt of the front wheels is referred to as? 1. Camber Camber 2. Steering axis inclination Steering axis inclination 3. Caster Caster

Slide 23

You are ready for the test!