oil test requisition form of ciotl hyd

Format No: EP08A03 POWER GRID CORPORATION OF INDIA LTD. (A Govt. of India Enterprise) Central Insulating Oil Testing Laboratory, Hyderabad P B No: 2, PO: GHATKESAR-501 301, Dist: RR (A.P) INDIA Tel: +91-8415-222498, Fax:+91-8415-222394 e-mail: [email protected] , [email protected] Testing Requisition Form 1. Sample Sent By: Name / Designation Organisation Name and Address Tel No & Fax E-mail 2. Oil Sample Details: Date & Time of Sampling Sampling Point Oil Temp degC Wdg Temp, degC Load at the Time of Sample (MW/MVA/AMPS) Voltage at the Time of Sampling (KV) Sample Remarks 3. Equipment Details Substation / Plant Name Trans Name / feeder Name / Location ID Make Manufacturer Sl No Capacity of Equipment (MVA)(1Ph/3Ph) Voltage Rating (In KV) Type of Cooling ONAN/OFAN/ONAF//OFAF Breather Arrangement Diaphragm / Air Cell/Conventional / Drycol Type of Oil Paraffinic / Nephthenic Inhibited / Uninhibited Quantity of oil in the Equipment, kL Date of Installation Date Of Last Filtration Any Other Information 4. Tests to be done: (please tick desired standard and required tests) Reference Standard: Oil Parameters: IS-1866 (Before Charging) / IS-1866 (In-Service) / IS-335 / IS-12463 / Dissolved Gas Analysis (IS-9434) Water Content (IS-13567) Dielectric Strength (IS-6792) Specific Resistance at 90degC (IS-6103) Dielectric Dissipation Factor at 90degC (IS-6262) Total Acidity (IEC-62021 Vol-1 / IS-1448 P-1) Inter Facial Tension at 27°C (IS-6104) Flash Point (IS-1448-P-21) Sludge Content (IS-1866) Kinematic Viscosity at 27°C (IS-1448-P-25) Pour Point (IS-1448 P-10) Density at 29.5°C (IS-1448 P-16) Carbon Type Composition (IS-13155) Oxidation Stability (Annex-C of IS-335) SK Value (Annex-D of IS-335) Oxidative Aging (IS-12177 (Method-A)) Corrosive Sulphur (Annex-B of IS-335) Inhibitor Content (IS-13631) Furan Analysis (IEC-61198) # To be filled by external customers only Request Reviewed and Sample Accepted Signature of CIOTL Representative: Sample Sent by (Signature): Sample Number (To be filled by CIOTL Representative):

Upload: saptarshi-chatterjee

Post on 19-Nov-2015

138 views

Category:

Documents

37 download

Report

Download

Embed Size (px):

DESCRIPTION

Just in case you need it

TRANSCRIPT

Format No: EP08A03

POWER GRID CORPORATION OF INDIA LTD. (A Govt. of India Enterprise)

Central Insulating Oil Testing Laboratory, Hyderabad P B No: 2, PO: GHATKESAR-501 301, Dist: RR (A.P) INDIA Tel: +91-8415-222498, Fax:+91-8415-222394

e-mail: [email protected], [email protected]

Testing Requisition Form 1. Sample Sent By: Name / Designation Organisation Name and Address

Tel No & Fax E-mail 2. Oil Sample Details: Date & Time of Sampling Sampling Point Oil Temp degC Wdg Temp, degC Load at the Time of Sample (MW/MVA/AMPS) Voltage at the Time of Sampling (KV) Sample Remarks 3. Equipment Details Substation / Plant Name Trans Name / feeder Name / Location ID

Make Manufacturer Sl No Capacity of Equipment (MVA)(1Ph/3Ph)

Voltage Rating (In KV) Type of Cooling ONAN/OFAN/ONAF//OFAF Breather Arrangement Diaphragm / Air Cell/Conventional / Drycol Type of Oil Paraffinic / Nephthenic Inhibited / Uninhibited

Quantity of oil in the Equipment, kL

Date of Installation Date Of Last Filtration Any Other Information 4. Tests to be done: (please tick desired standard and required tests) Reference Standard: Oil Parameters: IS-1866 (Before Charging) / IS-1866 (In-Service) / IS-335 / IS-12463 / Dissolved Gas Analysis (IS-9434) Water Content (IS-13567) Dielectric Strength (IS-6792)

Specific Resistance at 90degC (IS-6103) Dielectric Dissipation Factor at 90degC (IS-6262) Total Acidity (IEC-62021 Vol-1 / IS-1448 P-1)

Inter Facial Tension at 27C (IS-6104) Flash Point (IS-1448-P-21) Sludge Content (IS-1866)

Kinematic Viscosity at 27C (IS-1448-P-25) Pour Point (IS-1448 P-10) Density at 29.5C (IS-1448 P-16)

Carbon Type Composition (IS-13155) Oxidation Stability (Annex-C of IS-335) SK Value (Annex-D of IS-335)

Oxidative Aging (IS-12177 (Method-A)) Corrosive Sulphur (Annex-B of IS-335) Inhibitor Content (IS-13631)

Furan Analysis (IEC-61198)

# To be filled by external customers only Request Reviewed and Sample Accepted Signature of CIOTL Representative:

Sample Sent by (Signature):

Sample Number (To be filled by CIOTL Representative):

NameDesgn: Addr: TelFax: sDate: sPoint: wti: kvolts: oti: load: ssname: make: cap: cooling: [OFAF]breather: [Conventional]oiltype: [Synth]kL: lastfDate: InstDate: othInfo: SampRem: feeder: slno: kVolts: D: R: I: V: C: G: 2: W: T: F: P: O: U: B: A: S: E: K: 6: email: