nova c series add ons manual english › sites › default › files › nova_c...attach the...

Nova C Series Add OnsManual

Index

p1-2

p3

p4

p5

p6

p7-10

p11-13

p14

p15-16

p17-21

p22

p23-27

Product description

Recycling

Assembly instructions|Nova C Back Armrest

Assembly instructions|Nova C Bench Armrest

Assembly instructions|Nova C Table

Assembly instructions|Nova C Endpiece Double

Assembly instructions Nova C Endpiece Singel

Assembly instructions Nova C Endpice Charger Cover Plate

Assembly instructions Radius Charger

Electrical instructions Radius Charger

Assembly instructions Food & Beverage Armrest

Electrical instructions Food & Beverage Armrest Charger

Nova C Series Add Ons Green Furniture Concept1

Nova C Bench Armrest

Nova C Bench Armrest can be placed in any slender rib of the Nova C bench. The default location is in the center of the bench module.

Material: Powder coated steel.

Nova C Table

The Nova C Table can be placed in any slender rib of Nova C Back, Nova C Bench, Nova C Wall or Nova C Double. The default location is in the center of the bench.

Material table top: Massive oak treated with hardwax oil.

Material table holder: Powder coated steel.

Nova C Back Armrest

Nova C Back Armrest can be placed in any slender rib of Nova C Back, Nova C Wall, or Nova C Double. The default location is in the center of the bench module.

Material: Powder coated steel.

Product descriptionAdd ons


Radius Charger

Nova Charger can be placed on any leg of Nova C Bench, Nova C Back or Nova C Back Double. Choose between your prefered combination of outlets and/or USB.

Material casing: Powder coated steel.

Material outlet: ABS

Product descriptionAdd ons

Nova C Food & Beverage Armrest

Nova C Food & Beverage Armrest can be placed in any end rib of the Nova C bench.

Material table top: Massive oak treated with hardwax oil.

Material table holder: Powder coated steel.

Material outlet: ABS


Legs, strips, armrest, table holder and small parts are made of steel and are sorted as metal.

Glides are made of HDPE and are sorted as plastic.

Ribs and table tops are made of wood and adhesive and are sorted as combustible.

Recycling


Nova C Back Armrest x1 Metal plate x2 Screw-nut A x4

Bolt B x4

Use slender rib with pre-drilled holes.Assemble armrest with Bolt B, metal plate and Screw-nut A

Assembly instructionsNova C Back Armrest

1 2


Nova C Bench Armrest x1 Metal plate x2 Screw-nut A x4

Bolt B x4

Use slender rib with pre-drilled holes.Assemble armrest with Bolt B, metal plate and Screw-nut A

Assembly instructionsNova C Bench Armrest

1 2


Nova C Table x1 Metal plate x1 Screw-nut A x5

Washer A x1

Bolt B x5

Use slender rib with pre-drilled holes.

Assemble table with Bolt B, Screw-nut A, Metal plate and Washer A

Metal plate

Use slender rib with pre-drilled holes.

Assembly instructionsNova C Table

1a 1b

2

6Nova C Series Add Ons Green Furniture Concept

Assembly instructionsNova C Endpice Double

Nova C Glides x4

Nova C Endpiece Leg x2 Nova C Slender Rib x14 Nova C Back Half Rib x12

Nova C Endpiece Clip x4Nova C Back Metal

Strip 90 x2Nova C Seat Metal

Strip 90 x2

Note: Due to that the assembly of this bench mostly is done with the ribs upside down we recommend you to use a blanket or simmilar to prevent damage to the ribs and metal parts.

Nova C Endpiece Conection Plate x2

Top Bracket x1Corner Bracket x2

Bolt A x8

Screw B x16

Screw A x94


Nova C Double Endpiece Cover Plate x1

Bolt B x22

8


1 2

Use bolt A to attach glides to the leg.

Use screw A to attach metal strips to the ribs. Start with the outer slender ribs, continue with the rest of the ribs.

3

Use screw A to attach the leg to the rib construction.

5 6

Repeat step 1-4 on both Endpieces and the push them togeter.

Attach the to Endpieces to each other with bolt B and the Endpiece Conection Plate. Attach the piecec both under the seat and in the front.

4

Attach the Endpiece Clip to the leg using bolt B.

Nova C Series Add Ons Green Furniture Concept

9


7 8

9

Attach the Endpiece whit screw B. Replace the three screws that are already in the Back Metal Strip.

Only three of the screws in the rest of the configuration should be replaced with the new screws for the endpice.

Use screw B to attach the Endpiece to the rest of the configuration through the Endpiece Clip.

1211

Attach the Top Bracket and the Corner Brackets to the Endpiece Cover using bolt A.


10

Use screw A to attach the Endpiece to the rib on the end in ther rest of your configuration through the Endpiece Clip.

Place the Nova C Endpice Cover at the end of the configuration.

13

Attach the Cover plate with Screw B.Replace the three screws that are already in the Metal Back Strip.

10


14

15

Use screw A to conect the top of the Cover Plate to the Back rib.


Assembly instructionsNova C Endpice Single


Nova C Glides x2

Nova C Endpiece Leg x1 Nova C Slender Rib x7 Nova C Back Half Rib x6

Nova C Endpiece Clip x1Nova C Back Metal

Strip 90 x1Nova C Seat Metal

Strip 90 x1

Note: Due to that the assembly of this bench mostly is done with the ribs upside down we recommend you to use a blanket or simmilar to prevent damage to the ribs and metal parts.


Bolt A x8

Screw B x16

Screw A x94

Nova C Endpiece Cover Plate x1

Bolt B x22



1 2

3 4

Use bolt A to attach glides to the leg.

Use screw A to attach metal strips to the ribs. Start with the outer slender ribs, continue with the rest of the ribs.

Use screw A to attach the leg to the rib construction.

Attach the Endpiece Clip to the leg using bolt B.

5 6

Attach the Endpiece whit screw B. Replace the three screws that are already in the Back Metal Strip.

Only three of the screws in the rest of the configuration should be replaced with the new screws for the endpice.

Place the Nova C Endpice Cover at the end of the configuration.



7

Use screw B to attach the Endpiece to the rest of the configuration through the Endpiece Clip.

8

Use screw A to attach the Endpiece to the rib on the end in ther rest of your configuration through the Endpiece Clip.

109

Attach the Top Bracket and the Corner Brackets to the Endpiece Cover using bolt A.

11

Attach the Cover plate with Screw B.Replace the three screws that are already in the Metal Back Strip.

12

Use screw A to conect the top of the Cover Plate to the Back rib.

Attach the hole assembly to the Nova C Endpiece configuration using screw A in the Top Bracket and Screw B for the Corner Brackets.

Assembly instructionsNova C Endpice Charger Cover Plate


1

2

Nova C Endpiece Charger Cover Plate x1 Charger Cover x1

Screw-nut A x6

Washer A x6

Place the Charger Cover on the Cover Plate.


Attach the Top and Corner Brackets to the Charger Cover Plate using washer A and screw-nut A.

3

Screw B x6

Screw A x2


Charger x1 Cable kit x1

Screw A x7

Assembly instructionsRadius Charger

Bolt A x4

Cable clip x7


Mount the charger on one of the benches legs.

Remove 7 of the current screws at the bottom of the metal strip. Then use screw A to attatchthe cable clips to the available holes.

Use bolt A to tighten the charger to the leg.Use the four holes closest to the edge.

Assembly instructionsRadius Charger

3 4

1 2

We recomende a distance of 20 mm between the charger and the seat ribs. But you can also choose the distance freely.

Insert the cable to the cable clips. Do it one cable clip at a time.

5 6

Use the adapter to connect the cable with the charger. If you have more chargers connect them togheter otherwise connect to main power.


French/Belgian

Indian Italian

Swiss Chinese

Australian USA/Japan

USB charge+TUF

UK fused UK unfused Schuko/EU

MAXM

FUSE

5.

��

Radius Charger modularity

Radius Charger are available in single or double colors and the two outlets can be of any of the modules below.

Product descriptionModularity & Apperance


Nova C SeriesRadius charger as single color mounted on Nova C Back

IOU SeriesRadius charger as single color mounted on IOU Back

Product descriptionApperance


Wieland ConnectorRadius Charger uses a Wieland connector cable to be able to link more than one charger to one electrisity source. The cable comes out from the back of Radius Charger as the image to the left showes. The length of the cable is 300mm by standard but can be made with a custom length if needed..

Electric componentRadius Charger uses a power socket with re-inforced insulation that is CE marked and certified with UL962A/CSA22.2 and UL1363. Both the power socket and its two outlets can be changed easily if needed.

Product descriptionElectric component


Radius Charger assemblyTo assemble Radius Charger onto a Nova C Series or IOU Series Bench slide the charger onto the leg, tighten the four screws and connect the power cable.

Product descriptionAssembly

Radius Charger Connecting Cables

Cable Kit (Standard: 1 kit per bench)

Starter Cable (Standard: 1 cable per configuration)Radius Charger

When connecting Radius Charger to your electricity source, you will need the following parts. Important! Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorised electrical contractor. Contact your local electricity authority for advice.

1 x Radius Charger(Green)

1 x Interconnector Cable(Yellow)

1 x Starter Cable(Orange)

1 x Slimline Male Wieland(Red)

1 x Wieland Adaptor Block(Purple)

4 x Cable Clip(Blue)

Product descriptionCables



Nova C Food & Beverage Armrest x1

Assembly instructionsFood & Beverage Armrest

Screw A x4

Use screw A to attach the F&B Armrest to the Nova C Back.

2

Use screw A to attach the F&B Armrest to the Nova C Back.

1


Product descriptionModularity & Apperance

French/Belgian

Indian Italian

Swiss Chinese

Australian USA/Japan

USB charge + TUF

UK fused UK unfused Schuko/EU

MAXM

FUSE

Food & Beverage Armrest Charger modularityThe two outlets can be of any of the modules below.

5.

��

Apperance

Food & Beverage Armrest Charger Charger Armrest used om Nova C.


Wieland Connector

Food & Beverage Armrest Charger uses a Wieland connector cable to be able to link more than one charger to one electrisity source. The cable comes out from the back of F&B Charger as the image to the left showes. The length of the cable is 300mm by standard but can be made with a custom length if needed..

F&B Armrest Charger uses a power socket with re-inforced insulation that is CE marked and certified with UL962A/CSA22.2 and UL1363. Both the power socket and its two outlets can be changed easily if needed.

Electrical components


Cables

Food & Beverage Armrest Carger Connecting CablesWhen connecting F&B Armrest Charger to your electricity source, you will need the following parts. Important! Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorised electrical contractor. Contact your local electricity authority for advice.

Cable Kit (Standard: 1 kit per bench)

Starter Cable (Standard: 1 cable per configuration)F&B Armrest Charger

1 x Interconnector Cable(Yellow)

1 x Starter Cable(Orange)

1 x Slimline Male Wieland(Red)

1 x Wieland Adaptor Block(Purple)

4 x Cable Clip(Blue)

1 x F&B Armrest Charger(Green)


Assembly

Food & Beverage ArmrestCharger assemblyTo assemble Food and Beverage Armrest Charger onto a Nova C Series Bench, screw in the Armrest in to the bench with the included screws and connect the power cable.

The cable should go through the back plate of the armrest and through the wooden rib.


greenfc.com

nova c series add ons manual english › sites › default › files › nova_c...attach the...

Documents