nondestructive examination · nondestructive examination 2002 addenda july 1, 2002 asme boiler and...
TRANSCRIPT
NONDESTRUCTIVEEXAMINATION
2002 AddendaJuly 1, 2002
ASME BOILER AND PRESSURE VESSEL COMMITTEESUBCOMMITTEE ONNONDESTRUCTIVEEXAMINATION
VV
THE AMERICAN SOCIETY OF MECHANICAL ENGINEERSNEW YORK, NEW YORK
ASME BOILER AND PRESSURE VESSEL CODEAN INTERNATIONAL CODE
S050W2
Date of Issuance: July 1, 2002
This international code or standard was developed under procedures accredited as meeting the criteria for American NationalStandards and it is an American National Standard. The Standards Committee that approved the code or standard was balanced toassure that individuals from competent and concerned interests have had an opportunity to participate. The proposed code or standardwas made available for public review and comment that provides an opportunity for additional public input from industry, academia,regulatory agencies, and the public-at-large.
ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned
in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicableletters patent, nor assume any such liability. Users of a code or standard are expressly advised that determination of the validity ofany such patent rights, and the risk of infringement of such rights, is entirely their own responsibility.
Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as government orindustry endorsement of this code or standard.
ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASMEprocedures and policies, which precludes the issuance of interpretations by individuals.
The footnotes in this document are part of this American National Standard.
The Specifications published and copyrighted by the American Society for Testing and Materialsare reproduced with the Society’s permission.
No part of this document may be reproduced in any form, in an electronic retrieval system orotherwise, without the prior written permission of the publisher.
Library of Congress Catalog Card Number: 56-3934Printed in the United States of America
The American Society of Mechanical EngineersThree Park Avenue, New York NY 10016-5990
Copyright © 2002 byTHE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
All Rights Reserved
2001 ASMEBOILER AND PRESSURE VESSEL CODE
SECTIONSA02
I Rules for Construction of Power BoilersII Materials
Part A — Ferrous Material SpecificationsPart B — Nonferrous Material SpecificationsPart C — Specifications for Welding Rods, Electrodes, and Filler MetalsPart D — Properties
III Subsection NCA — General Requirements for Division 1 and Division 2III Division 1
Subsection NB — Class 1 ComponentsSubsection NC — Class 2 ComponentsSubsection ND — Class 3 ComponentsSubsection NE — Class MC ComponentsSubsection NF — SupportsSubsection NG — Core Support StructuresSubsection NH — Class 1 Components in Elevated Temperature ServiceAppendices
III Division 2 — Code for Concrete ContainmentsIII Division 3 — Containment Systems for Storage and Transport Packagings of Spent Nuclear Fuel
and High Level Radioactive Material and WasteIV Rules for Construction of Heating BoilersV Nondestructive ExaminationVI Recommended Rules for the Care and Operation of Heating BoilersVII Recommended Guidelines for the Care of Power BoilersVIII Rules for Construction of Pressure Vessels
Division 1Division 2 — Alternative RulesDivision 3 — Alternative Rules for Construction of High Pressure Vessels
IX Welding and Brazing QualificationsX Fiber-Reinforced Plastic Pressure VesselsXI Rules for Inservice Inspection of Nuclear Power Plant Components
ADDENDA
Colored-sheet Addenda, which include additions and revisions to individual Sections of the Code, arepublished annually and will be sent automatically to purchasers of the applicable Sections up to thepublication of the 2004 Code. The 2001 Code is available only in the loose-leaf format; accordingly,the Addenda will be issued in the loose-leaf, replacement-page format.
INTERPRETATIONS
ASME issues written replies to inquiries concerning interpretation of technical aspects of the Code.The Interpretations for each individual Section will be published separately and will be included aspart of the update service to that Section. They will be issued semiannually (July and December) upto the publication of the 2004 Code. Interpretations of Section III, Divisions 1 and 2, will be includedwith the update service to Subsection NCA.
CODE CASES
The Boiler and Pressure Vessel Committee meets regularly to consider proposed additions and revisionsto the Code and to formulate Cases to clarify the intent of existing requirements or provide, when theneed is urgent, rules for materials or constructions not covered by existing Code rules. Those Caseswhich have been adopted will appear in the appropriate 2001 Code Cases book: (1) Boilers and PressureVessels and (2) Nuclear Components. Supplements will be sent automatically to the purchasers of theCode Cases books up to the publication of the 2004 Code.
CONTENTSA Detailed Contents Precedes Subsections A and B, and the Appendices
Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii
Statements of Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Summary of Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxv
Subsection A Nondestructive Methods of Examination . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Article 1 General Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Article 2 Radiographic Examination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Article 4 Ultrasonic Examination Methods for Welds . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Article 5 Ultrasonic Examination Methods for Materials . . . . . . . . . . . . . . . . . . . . . . . . 100
Article 6 Liquid Penetrant Examination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Article 7 Magnetic Particle Examination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Article 8 Eddy Current Examination of Tubular Products . . . . . . . . . . . . . . . . . . . . . . . . 145
Article 9 Visual Examination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
Article 10 Leak Testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168
Article 11 Acoustic Emission Examination of Fiber-Reinforced PlasticVessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Article 12 Acoustic Emission Examination of Metallic Vessels DuringPressure Testing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220
Article 13 Continuous Acoustic Emission Monitoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238
Subsection B Documents Adopted by Section V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262
Article 22 Radiographic Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 264
Article 23 Ultrasonic Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 377
Article 24 Liquid Penetrant Standards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 444
Article 25 Magnetic Particle Standards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492
Article 26 Eddy Current Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 536
Article 27 Leak Testing Standards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 548
Article 28 Visual Examination Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 559
Article 29 Acoustic Emission Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 575
Article 30 Terminology for Nondestructive Examinations Standard . . . . . . . . . . . . . . . . 601
Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 647
Appendix I Submittal of Technical Inquiries to the Boiler and PressureVessel Committee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 649
SI Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 651
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 654
v
A02
FOREWORD
The American Society of Mechanical Engineers setup a committee in 1911 for the purpose of formulatingstandard rules for the construction of steam boilers andother pressure vessels. This committee is now calledthe Boiler and Pressure Vessel Committee.
The Committee’s function is to establish rules ofsafety governing the design, fabrication, and inspectionduring construction of boilers and pressure vessels, andto interpret these rules when questions arise regardingtheir intent. In formulating the rules, the Committeeconsiders the needs of users, manufacturers, and inspec-tors of pressure vessels. The objective of the rules isto afford reasonably certain protection of life andproperty and to provide a margin for deterioration inservice so as to give a reasonably long, safe periodof usefulness. Advancements in design and materialand the evidence of experience have been recognized.
This Code contains mandatory requirements, specificprohibitions, and nonmandatory guidance for construc-tion1 activities. The Code does not address all aspectsof these activities and those aspects which are notspecifically addressed should not be considered prohib-ited. The Code is not a handbook and cannot replaceeducation, experience, and the use of engineering judg-ment. The phraseengineering judgmentrefers to techni-cal judgments made by knowledgeable designers experi-enced in the application of the Code. Engineeringjudgments must be consistent with Code philosophyand such judgments must never be used to overrulemandatory requirements or specific prohibitions ofthe Code.
The Committee recognizes that tools and techniquesused for design and analysis change as technologyprogresses and expects engineers to use good judgmentin the application of these tools. The designer is respon-sible for complying with Code rules and demonstratingcompliance with Code equations when such equationsare mandatory. The Code neither requires nor prohibitsthe use of computers for the design or analysis ofcomponents constructed to the requirements of theCode. However, designers and engineers using computer
1 Construction, as used in this Foreword, is an all-inclusive termcomprising materials, design, fabrication, examination, inspection,testing, certification, and pressure relief.
vii
programs for design or analysis are cautioned that theyare responsible for all technical assumptions inherentin the programs they use and they are responsible forthe application of these programs to their design.
The Code does not fully address tolerances. Whendimensions, sizes, or other parameters are not specifiedwith tolerances, the values of these parameters areconsidered nominal and allowable tolerances or localvariances may be considered acceptable when basedon engineering judgment and standard practices asdetermined by the designer.
The Boiler and Pressure Vessel Committee dealswith the care and inspection of boilers and pressurevessels in service only to the extent of providingsuggested rules of good practice as an aid to ownersand their inspectors.
The rules established by the Committee are not tobe interpreted as approving, recommending, or endors-ing any proprietary or specific design or as limitingin any way the manufacturer’s freedom to choose anymethod of design or any form of construction thatconforms to the Code rules.
The Boiler and Pressure Vessel Committee meetsregularly to consider revisions of the rules, new rulesas dictated by technological development, Code Cases,and requests for interpretations. Only the Boiler andPressure Vessel Committee has the authority to provideofficial interpretations of this Code. Requests for revi-sions, new rules, Code Cases, or interpretations shallbe addressed to the Secretary in writing and shall givefull particulars in order to receive consideration andaction (see Mandatory Appendix covering preparationof technical inquiries). Proposed revisions to the Coderesulting from inquiries will be presented to the MainCommittee for appropriate action. The action of theMain Committee becomes effective only after confirma-tion by letter ballot of the Committee and approval byASME.
Proposed revisions to the Code approved by theCommittee are submitted to the American NationalStandards Institute and published inMechanical Engi-neeringto invite comments from all interested persons.After the allotted time for public review and final
approval by ASME, revisions are published annuallyin Addenda to the Code.
Code Cases may be used in the construction ofcomponents to be stamped with the ASME Code symbolbeginning with the date of their approval by ASME.
After Code revisions are approved by ASME, theymay be used beginning with the date of issuance shownon the Addenda. Revisions, except for revisions tomaterial specifications in Section II, Parts A and B,become mandatory 6 months after such date of issuance,except for boilers or pressure vessels contracted forprior to the end of the 6 month period. Revisions tomaterial specifications are originated by the AmericanSociety for Testing and Materials (ASTM), and otherrecognized national or international organizations andare usually adopted by ASME. However, those revisionsmay or may not have any effect on the suitability ofmaterial, produced to earlier editions of specifications,for use in ASME construction. ASME material specifi-cations approved for use in each construction Code arelisted in the Appendices of Section II, Parts A and B.These Appendices list, for each specification, the latestedition adopted by ASME, and earlier and later editionsconsidered by ASME to be identical for ASME con-struction.
Manufacturers and users of components are cautionedagainst making use of revisions and Cases that are lessrestrictive than former requirements without havingassurance that they have been accepted by the properauthorities in the jurisdiction where the component isto be installed.
Each state and municipality in the United States andeach province in Canada that adopts or accepts one ormore Sections of the Boiler and Pressure Vessel Codeis invited to appoint a representative to act on theConference Committee to the Boiler and Pressure VesselCommittee. Since the members of the Conference Com-mittee are in active contact with the administration andenforcement of the rules, the requirements for inspectionin this Code correspond with those in effect in theirrespective jurisdictions. The required qualifications foran Authorized Inspector under these rules may beobtained from the administrative authority of any state,municipality, or province which has adopted these rules.
The Boiler and Pressure Vessel Committee in theformulation of its rules and in the establishment ofmaximum design and operating pressures considersmaterials, construction, methods of fabrication, inspec-tion, and safety devices. Permission may be grantedto regulatory bodies and organizations publishing safetystandards to use a complete Section of the Code byreference. If usage of a Section, such as Section IX,
viii
involves exceptions, omissions, or changes in provisions,the intent of the Code might not be attained.
Where a state or other regulatory body, in the printingof any Section of the Boiler and Pressure Vessel Code,makes additions or omissions, it is recommended thatsuch changes be clearly indicated.
The National Board of Boiler and Pressure VesselInspectors is composed of chief inspectors of statesand municipalities in the United States and of provincesin Canada that have adopted the Boiler and PressureVessel Code. This Board, since its organization in 1919,has functioned to uniformly administer and enforce therules of the Boiler and Pressure Vessel Code. Thecooperation of that organization with the Boiler andPressure Vessel Committee has been extremely helpful.
The Code Committee does not rule on whether acomponent shall or shall not be constructed to theprovisions of the Code. The Scope of each Sectionhas been established to identify the components andparameters considered by the Committee in formulatingthe Code rules. Laws or regulations issued by municipal-ity, state, provincial, federal, or other enforcement orregulatory bodies having jurisdiction at the location ofan installation establish the mandatory applicability ofthe Code rules, in whole or in part, within theirjurisdiction. Those laws or regulations may require theuse of this Code for vessels or components not consid-ered to be within its Scope or may establish additions ordeletions in that Scope. Accordingly, inquiries regardingsuch laws or regulations are to be directed to theissuing enforcement or regulatory body.
Questions or issues regarding compliance of a specificcomponent with the Code rules are to be directed tothe ASME Certificate Holder (Manufacturer). Inquiriesconcerning the interpretation of the Code are to bedirected to the ASME Boiler and Pressure VesselCommittee. ASME is to be notified should questionsarise concerning improper use of an ASME Codesymbol.
The specifications for materials given in Section IIare identical with or similar to those of the Specificationspublished by ASTM, AWS, and other recognized na-tional or international organizations. When reference ismade in an ASME material specification to a non-ASME specification for which a companion ASMEspecification exists, the reference shall be interpretedas applying to the ASME material specification. Notall materials included in the material specifications inSection II have been adopted for Code use. Usage islimited to those materials and grades adopted by atleast one of the other Sections of the Code for applica-tion under rules of that Section. All materials allowedby these various Sections and used for construction
within the scope of their rules shall be furnished inaccordance with material specifications contained inSection II or referenced in Appendices A of SectionII, Parts A and B except where otherwise provided inCode Cases or in the applicable Section of the Code.Materials covered by these specifications are acceptablefor use in items covered by the Code Sections onlyto the degree indicated in the applicable Section. Materi-als for Code use should preferably be ordered, produced,and documented on this basis; Appendix A to SectionII, Part A and Appendix A to Section II, Part B listeditions of ASME and year dates of specifications thatmeet ASME requirements and which may be used inCode construction. Material produced to an acceptablespecification with requirements different from the re-quirements of the corresponding specifications listed in
ix
Appendix A of Part A or Part B may also be usedin accordance with the above, provided the materialmanufacturer or vessel manufacturer certifies with evi-dence acceptable to the Authorized Inspector that thecorresponding requirements of specifications listed inAppendix A of Part A or Part B have been met.Material produced to an acceptable material specificationis not limited as to country of origin.
When required by context in this Section, the singularshall be interpreted as the plural, and vice-versa; andthe feminine, masculine, or neuter gender shall betreated as such other gender as appropriate.
Publication of the SI (Metric) Edition of the ASMEBoiler and Pressure Vessel Code was discontinued withthe 1986 Edition. Effective October 1, 1986, the SIEdition was withdrawn as an ASME Boiler and PressureVessel Code document.
STATEMENT OF POLICYON THE USE OF CODE SYMBOLS AND
CODE AUTHORIZATION IN ADVERTISING
ASME has established procedures to authorize quali-fied organizations to perform various activities in ac-cordance with the requirements of the ASME Boilerand Pressure Vessel Code. It is the aim of the Societyto provide recognition of organizations so authorized.An organization holding authorization to perform vari-ous activities in accordance with the requirements ofthe Code may state this capability in its advertisingliterature.
Organizations that are authorized to use Code Symbolsfor marking items or constructions which have been con-structed and inspected in compliance with the ASMEBoiler and Pressure Vessel Code are issued Certificates ofAuthorization. It is the aim of the Society to maintain thestanding of the Code Symbols for the benefit of the users,the enforcement jurisdictions, and the holders of the sym-bols who comply with all requirements.
Based on these objectives, the following policy hasbeen established on the usage in advertising of facsimilesof the symbols, Certificates of Authorization, and refer-ence to Code construction. The American Society ofMechanical Engineers does not “approve,” “certify,”
STATEMENT OF POLICYON THE USE OF ASME MARKING
TO IDENTIFY MANUFACTURED ITEMS
The ASME Boiler and Pressure Vessel Code providesrules for the construction of boilers, pressure vessels, andnuclear components. This includes requirements for mate-rials, design, fabrication, examination, inspection, andstamping. Items constructed in accordance with all of theapplicable rules of the Code are identified with the officialCode Symbol Stamp described in the governing Section ofthe Code.
Markings such as “ASME,” “ASME Standard,” orany other marking including “ASME” or the variousCode Symbols shall not be used on any item which is
xi
“rate,” or “endorse” any item, construction, or activityand there shall be no statements or implications whichmight so indicate. An organization holding a CodeSymbol and/or a Certificate of Authorization may statein advertising literature that items, constructions, oractivities “are built (produced or performed) or activitiesconducted in accordance with the requirements of theASME Boiler and Pressure Vessel Code,” or “meetthe requirements of the ASME Boiler and PressureVessel Code.”
The ASME Symbol shall be used only for stampingand nameplates as specifically provided in the Code.However, facsimiles may be used for the purpose offostering the use of such construction. Such usage maybe by an association or a society, or by a holder of a CodeSymbol who may also use the facsimile in advertising toshow that clearly specified items will carry the symbol.General usage is permitted only when all of a manufactur-er’s items are constructed under the rules.
The ASME logo, which is the cloverleaf with theletters ASME within, shall not be used by any organiza-tion other than ASME.
not constructed in accordance with all of the applicablerequirements of the Code.
Items shall not be described on ASME Data ReportForms nor on similar forms referring to ASME whichtend to imply that all Code requirements have beenmet when, in fact, they have not been. Data ReportForms covering items not fully complying with ASMErequirements should not refer to ASME or they shouldclearly identify all exceptions to the ASME require-ments.
PERSONNELASME Boiler and Pressure Vessel Committee
Subcommittees, Subgroups, and Working GroupsAs of January 1, 2002
MAIN COMMITTEE
G. G. Karcher, Chair W. M. LundyJ. G. Feldstein, Vice Chair J. R. MacKayJ. S. Brzuszkiewicz, Secretary T. G. McCartyR. W. Barnes U. R. MillerD. L. Berger R. A. MoenM. D. Bernstein P. A. MolvieM. N. Bressler C. C. NeelyD. A. Canonico T. P. PastorF. C. Cherny C. J. PieperD. A. Douin R. F. ReedyR. E. Feigel B. W. RobertsR. E. Gimple F. J. Schaaf, Jr.M. Gold A. SelzO. F. Hedden D. E. TannerD. F. Landers
EXECUTIVE COMMITTEE (MAIN COMMITTEE)
J. G. Feldstein, Chair M. GoldG. G. Karcher, Vice Chair J. R. MacKayJ. S. Brzuszkiewicz, Secretary T. P. PastorR. W. Barnes A. SelzD. A. Canonico A. J. SpencerR. E. Gimple D. E. Tanner
HONORARY MEMBERS (MAIN COMMITTEE)
R. D. Bonner R. C. GriffinR. J. Bosnak E. J. HemzyG. Bynog M. H. JawadH. M. Canavan J. E. LattanR. J. Cepluch J. LeCoffL. J. Chockie F. N. MoschiniW. E. Cooper W. E. SomersW. D. Doty L. P. Zick, Jr.J. R. Farr
HONORS AND AWARDS COMMITTEE
J. R. MacKay, Chair M. GoldA. J. Spencer, Vice Chair F. E. GregorG. Moino, Secretary M. H. JawadF. P. Barton D. P. JonesM. D. Bernstein T. P. PastorJ. G. Feldstein C. J. Pieper
xiii
MARINE CONFERENCE GROUP
J. Tiratto, Chair J. L. JonesL. W. Douthwaite
CONFERENCE COMMITTEE
D. A. Douin — Illinois (Chair) S. Katz — British Columbia,R. D. Reetz — North Dakota Canada
(Vice Chair) M. Kotb — Quebec, CanadaD. E. Tanner — Ohio (Sec- K. T. Lau — Alberta, Canada
retary) J. Lemire — CaliforniaR. J. Aben, Jr. — Michigan C. Lundine — OregonJ. T. Amato — Minnesota S. E. Lyons — ArkansasE. A. Anderson — Chicago, Il- M. A. Malek — Florida
linois G. F. Mankel — AlaskaM. M. Barber — Michigan R. D. Marvin II — WashingtonR. Barlett — Arizona I. W. Mault — Manitoba,F. P. Barton — Virginia CanadaW. K. Brigham — New Hamp- H. T. McEwen — Mississippi
shire A. W. Meiring — IndianaD. E. Burns — Nebraska R. Mile — Ontario, CanadaJ. H. Burpee — Maine M. F. Mooney — Massachu-C. Castle — Nova Scotia, setts
Canada Y. Nagpaul — HawaiiR. R. Cate — Louisiana J. D. Payton — PennsylvaniaL. Chase — Northwest Territo- M. R. Peterson — Alaska
ries, Canada H. D. Pfaff — South DakotaR. A. Coomes — Kentucky D. C. Price — Yukon Territory,J. Corcoran — Connecticut CanadaD. Eastman — Newfoundland R. S. Pucek — Wisconsin
and Labrador, Canada D. E. Ross — New Brunswick,G. L. Ebeyer — New Orleans, Canada
Louisiana M. Shuff — West VirginiaJ. J. Engelking — Maryland N. Surtees — Saskatchewan,E. Everett — Georgia CanadaP. C. Hackford — Utah M. R. Toth — TenneseeD. H. Hanrath — North Car- M. J. Verhagen — Wisconsin
olina M. Washington — New JerseyJ. B. Harlan — Delaware R. B. West — IowaM. L. Holloway — Oklahoma M. J. Wheel — VermontK. Hynes — Prince Edward R. K. White — New York
Island, Canada T. F. Wickham — Rhode IslandD. T. Jagger — Ohio C. S. Withers — ColoradoD. J. Jenkins — Kansas
INTERNATIONAL INTEREST REVIEW GROUP
V. Felix P. WilliamsonL. S. Hung
A02
SUBCOMMITTEE ON POWER BOILERS (SC I)
J. R. MacKay, Chair R. E. McLaughlinM. D. Bernstein, Vice Chair P. A. MolvieJ. N. Shih, Secretary D. K. ParrishD. L. Berger J. T. PillowE. Everett R. G. PresnakF. R. Gerety B. W. RobertsJ. Hainsworth R. D. Schueler, Jr.T. E. Hansen J. M. TanzoshJ. S. Hunter R. V. WielgoszinskiC. F. Jeerings D. N. French, HonoraryH. Lorenz MemberW. L. Lowry R. L. Williams, HonoraryT. C. McGough Member
Subgroup on Design (SC I)
P. A. Molvie, Chair J. C. LightM. D. Bernstein R. D. Schueler, Jr.M. L. Coats J. L. SeigleJ. D. Fishburn N. SurteesC. F. Jeerings R. V. Wielgoszinski
Subgroup on Fabrication and Examination (SC I)
D. L. Berger, Chair T. C. McGoughR. E. McLaughlin, Secretary S. C. PetitgoutJ. Hainsworth J. T. PillowT. E. Hansen R. D. Schueler, Jr.J. M. Lyons R. V. Wielgoszinski
Subgroup on General Requirements (SC I)
R. E. McLaughlin, Chair C. F. JeeringsJ. Hainsworth, Secretary J. M. LyonsD. L. Berger T. C. McGoughM. D. Bernstein D. K. ParrishE. Everett J. T. PillowF. R. Gerety
Subgroup on Materials (SC I)
B. W. Roberts, Chair J. P. LibbrechtJ. S. Hunter, Secretary F. MasuyamaK. K. Coleman J. M. TanzoshK. L. Hayes H. N. Titer, Jr.J. F. Henry
Subgroup on Piping (SC I)
T. E. Hansen, Chair T. C. McGoughD. L. Berger R. G. PresnakM. D. Bernstein M. W. SmithP. D. Edwards E. A. WhittleW. L. Lowry
Heat Recovery Steam Generators Task Group (SC I & SC VIII)
J. M. Lyons D. W. RahoiA. L. Plumley
xiv
SUBCOMMITTEE ON MATERIALS (SC II)
M. Gold, Chair F. MasuyamaR. A. Moen, Vice Chair J. R. MaurerN. Lobo, Secretary R. K. NanstadD. C. Agarwal M. L. NayyarW. R. Apblett, Jr. E. G. NisbettM. N. Bressler J. T. ParsonsJ. Cameron D. W. RahoiD. A. Canonico B. W. RobertsW. D. Doty R. R. SeeleyA. Fujio E. ShapiroD. W. Gandy C. E. Spaeder, Jr.M. H. Gilkey R. W. SwindemanJ. J. Heger J. M. TanzoshJ. F. Henry B. E. ThurgoodC. L. Hoffmann J. C. VaillantG. C. Hsu R. S. Vecchio
Honorary Members (SC II)
A. P. Ahrendt W. D. EdsallR. Dirscherl A. W. Zeuthen
Subgroup on External Pressure (SC II & SC-D)
R. W. Mikitka, Chair D. L. KurleB. R. Morelock, Secretary E. MichalopoulosD. C. Agarwal D. NadelD. J. Green D. F. ShawD. S. Griffin C. E. Spaeder, Jr.M. Katcher C. H. Sturgeon
Subgroup on Ferrous Specifications (SC II)
E. G. Nisbett, Chair J. F. LongeneckerK. L. Aber W. C. MackA. Appleton J. R. MaurerR. M. Davison A. S. MelilliB. M. Dingman K. E. OrieT. Graham E. UpitisW. N. Holliday R. ZawieruchaK. M. Hottle A. W. ZeuthenD. Janikowski R. H. ZongD. C. Krouse
Subgroup on International Material Specifications (SC II)
W. M. Lundy, Secretary F. OsweillerD. C. Agarwal J. T. ParsonsJ. Cameron R. D. Schueler, Jr.W. D. Doty R. R. SeeleyD. M. Fryer R. C. SoinJ. P. Glaspie E. A. SteenM. Gold E. UpitisM Higuchi
Subgroup on Nonferrous Alloys (SC II)
D. W. Rahoi, Chair E. L. HibnerD. C. Agarwal, Secretary G. C. HsuW. R. Apblett, Jr. M. KatcherH. D. Bushfield A. G. Kireta, Jr.L. G. Coffee R. KissellA. Cohen E. ShapiroM. H. Gilkey R. C. SutherlinB. Heuer R. Zawierucha
Subgroup on Strength, Ferrous Alloys (SC II)
C. L. Hoffmann, Chair F. MasuyamaJ. M. Tanzosh, Secretary R. A. MoenW. R. Apblett, Jr. D. W. RahoiD. A. Canonico B. W. RobertsK. K. Coleman R. R. SeeleyA. Fujio C. E. Spaeder, Jr.M. Gold R. W. SwindemanJ. J. Heger B. E. ThurgoodS. Kinomura T. P. Vassallo
Subgroup on Strength of Weldments (SC II & SC IX)
J. M. Tanzosh, Chair J. F. HenryK. K. Coleman D. W. RahoiW. D. Doty C. E. Spaeder, Jr.K. L. Hayes W. J. Sperko
Subgroup on Toughness (SC II & VIII)
W. S. Jacobs, Chair C. C. NeelyJ. L. Arnold T. T. PhillipsR. J. Basile M. D. RanaJ. Cameron R. R. SeeleyW. D. Doty J. W. StokesH. E. Gordon E. UpitisG. B. Komora R. S. VecchioK. Mokhtarian S. Yukawa
SUBCOMMITTEE ON NUCLEAR POWER (SC III)
R. W. Barnes, Chair R. S. Hill IIIR. M. Jessee, Vice Chair C. L. HoffmannC. A. Sanna, Secretary K.-H. HsuY. Asada C. C. KimW. H. Borter D. F. LandersE. B. Branch W. C. LaRochelleM. N. Bressler E. A. MayhewF. C. Cherny W. N. McLeanR. E. Cornman, Jr. R. A. MoenR. P. Deubler D. B. NickersonW. D. Doty R. F. ReedyF. R. Drahos B. B. ScottB. A. Erler J. D. StevensonG. M. Foster K. R. WichmanD. H. Hanrath
xv
Subgroup on Containment Systems for Spent Fueland High-Level Waste Transport Packagings (SC III)
G. M. Foster, Chair G. C. MokG. J. Solovey, Vice Chair T. J. NeiderD. K. Morton, Secretary R. E. NickellW. H. Borter T. J. O’ConnellJ. T. Conner T. SaegusaE. L. Farrow N. M. SimpsonJ. M. Floyd R. H. SmithD. R. Heath J. D. StevensonR. S. Hill III C. J. TemusW. H. Lake P. TurulaH. W. Lee S. YukawaP. E. McConnell
Subgroup on Design (SC III)
R. P. Deubler, Chair R. S. Hill IIIE. B. Branch, Vice Chair R. I. JetterA. N. Nguyen, Secretary H. KobayashiT. M. Adams J. T. LandY. Asada D. F. LandersR. W. Barnes W. N. McLeanM. N. Bressler J. C. MinichielloC. W. Bruny W. Z. NovakD. L. Caldwell E. C. RodabaughJ. R. Cole I. SaitoR. E. Cornman, Jr. J. R. SantangeloA. A. Dermenjian G. C. SlagisD. H. Hanrath J. D. StevensonR. W. Haupt K. R. Wichman
Working Group on Administration (SG-D) (SC III)
E. B. Branch, Chair D. F. LandersR. W. Barnes, Vice Chair W. N. McLeanR. S. Hill III, Secretary D. B. NickersonC. W. Bruny W. Z. NovakR. P. Deubler J. R. SantangeloJ. T. Land
Working Group on Supports (SG-D) (SC III)
R. J. Masterson, Chair J. C. HennartR. M. Dulin, Jr., Secretary A. N. NguyenU. S. Bandyopadhyay P. R. OlsonF. J. Birch I. SaitoJ. R. Cole J. R. StinsonR. P. Deubler D. V. WalsheJ. C. Finneran, Jr. C.-I. Wu
Working Group on Core Support Structures (SG-D) (SC III)
J. T. Land, Chair J. F. Mullooly
Working Group on Dynamic and Extreme Load Conditions(SG-D) (SC III)
D. L. Caldwell, Chair W. S. LaPayP. L. Anderson, Secretary H. LockertM. K. Au-Yang A. E. MeligiR. D. Blevins P. R. OlsonP.-Y. Chen R. F. PerryA. Hadjian
Working Group on Piping (SG-D) (SC III)
J. R. Cole, Chair J. F. McCabeP. Hirschberg, Secretary J. C. MinichielloT. M. Adams S. E. MooreG. A. Antaki A. N. NguyenJ. T. Conner O. O. OyamadaA. B. Glickstein R. D. PatelR. J. Gurdal E. C. RodabaughR. W. Haupt J. R. SantangeloJ. C. Hennart M. S. SillsR. S. Hill III G. C. SlagisR. D. Hookway V. K. VermaR. B. Jenkins E. A. WaisD. F. Landers C.-I. WuK. A. Manoly
Working Group on Pumps (SG-D) (SC III)
R. E. Cornman, Jr., Chair J. E. LivingstonH. L. Brammer D. B. NickersonA. A. Fraser R. A. SchusslerM. Higuchi D. B. Spencer, Jr.G. R. Jones H. TafarrodiJ. W. Leavitt G. K. Vaghasia
Working Group on Valves (SG-D) (SC III)
W. N. McLean, Chair S. N. ShieldsR. R. Brodin H. R. SondereggerR. Koester J. C. TsacoyeanesJ. D. Page R. G. Visalli
Working Group on Vessels (SG-D) (SC III)
C. W. Bruny, Chair K. A. ManolyG. D. Cooper D. E. MatthewsD. H. Hanrath G. K. MillerM. Hartzman W. Z. NovakW. J. Heilker E. PellingA. Kalnins H. S. ThorntonT. M. Khan
Special Working Group on Environmental Effects (SG-D) (SC III)
W. Z. Novak, Chair C. L. HoffmannY. Asada R. A. MoenW. J. Heilker S. YukawaR. S. Hill III
xvi
Special Working Group on Seismic Piping Rules (SG-D) (SC III)
E. B. Branch, Chair V. MatzenT. M. Adams J. C. MinichielloG. A. Antaki M. S. SillsK. Hasegawa Y. UrabeT. Isogai E. A. WaisH. Kobayashi T. Yamazaki
Subgroup on General Requirements (SC III & SC 3C)
W. C. LaRochelle, Chair R. MileA. Appleton M. R. MinickB. H. Berg B. B. ScottC. Lizotte H. K. SharmaE. A. Mayhew D. M. VickeryR. P. McIntyre D. V. WalsheM. J. Meyer
Subgroup on Materials, Fabrication, and Examination (SC III)
C. L. Hoffmann, Chair C. C. KimG. P. Milley, Secretary R. A. MoenB. H. Berg H. MurakamiW. H. Borter C. J. PieperD. M. Doyle N. M. SimpsonF. R. Drahos R. C. SoinG. M. Foster W. J. SperkoG. B. Georgiev K. B. StuckeyJ. E. Harris S. YukawaR. M. Jessee
Subgroup on Pressure Relief (SC III)
S. F. Harrison, Jr., Chair A. L. SzeglinF. C. Cherny D. G. ThibaultE. M. Petrosky
Special Working Group on Editing and Review (SC III)
R. F. Reedy, Chair B. A. ErlerW. H. Borter D. H. HanrathM. N. Bressler W. C. LaRochelleD. L. Caldwell J. D. StevensonR. P. Deubler
JOINT ACI-ASME COMMITTEE ONCONCRETE COMPONENTS FOR NUCLEAR SERVICE (SC 3C)
M. F. Hessheimer, Chair T. C. InmanS. J. Rossi, Secretary D. C. JengJ. P. Allen III T. E. JohnsonJ. F. Artuso N.-H. LeeR. M. Attar S. F. PutmanA. C. Eberhardt B. B. ScottB. A. Erler R. E. ShewmakerJ. Gutierrez J. D. StevensonD. J. Haavik A. Y. Wong
SUBCOMMITTEE ON HEATING BOILERS (SC IV)
P. A. Molvie, Chair K. R. MoskwaS. V. Voorhees, Vice Chair R. I. MullicanG. Moino, Secretary E. A. NordstromT. L. Bedeaux J. L. SeigleW. L. Haag, Jr. R. H. WeigelW. M. Hiddleston R. V. WielgoszinskiJ. D. Hoh J. I. WoodworthD. H. Mapes R. B. Duggan, HonoraryK. M. McTague Member
Subgroup on Care and Operation of Heating Boilers (SC IV)
S. V. Voorhees, Chair K. M. McTagueG. Moino, Secretary P. A. MolvieT. L. Bedeaux R. I. MullicanK. J. Hoey T. F. WickhamJ. D. Hoh
Subgroup on Cast Iron Boilers (SC IV)
K. M. McTague, Chair K. R. MoskwaT. L. Bedeaux R. H. WeigelC. P. McQuiggan J. I. Woodworth
Subgroup on Water Heaters (SC IV)
W. L. Haag, Jr., Chair R. I. MullicanT. D. Gantt D. E. TannerW. M. Hiddleston M. A. TaylorF. M. Lucas T. E. TrantK. M. McTague
Subgroup on Welded Boilers (SC IV)
J. L. Seigle, Chair E. A. NordstromT. L. Bedeaux R. P. SullivanB. G. French D. E. TannerD. H. Mapes R. V. Wielgoszinski
SUBCOMMITTEE ONNONDESTRUCTIVE EXAMINATION (SC V)
T. G. McCarty, Chair F. B. KovacsJ. E. Batey, Vice Chair R. W. KruzicE. H. Maradiaga, Secretary J. F. ManningS. J. Akrin W. C. McGaugheyA. S. Birks R. D. McGuireN. Y. Faransso F. J. SattlerO. F. Hedden E. F. Summers, Jr.G. W. Hembree M. J. Wheel
Subgroup on General Requirements/Personnel Qualifications and Inquiries (SC V)
R. D. McGuire, Chair G. W. HembreeJ. E. Batey J. R. MacKayA. S. Birks J. P. SwezyN. Y. Faransso
xvii
Subgroup on Surface Examination Methods (SC V)
A. S. Birks, Chair R. W. KruzicS. J. Akrin F. J. SattlerT. Alexander E. F. Summers, Jr.N. Y. Faransso R. J. ValdesG. W. Hembree M. J. Wheel
Subgroup on Volumetric Methods (SC V)
J. E. Batey, Chair R. W. KruzicS. J. Akrin J. F. ManningN. Y. Faransso W. C. McGaugheyG. W. Hembree J. R. MitchellB. Kellerhall F. J. SattlerE. K. Kietzman E. F. Summers, Jr.F. B. Kovacs J. P. Swezy
Working Group on Acoustic Emissions (SG-VM) (SC V)
J. E. Batey J. R. MitchellJ. F. Manning
Working Group on Radiography (SG-VM) (SC V)
G. W. Hembree, Chair F. B. KovacsS. J. Akrin R. W. KruzicT. Alexander E. F. Summers, Jr.J. E. Batey J. P. SwezyN. Y. Faransso
Working Group on Ultrasonics (SG-VM) (SC V)
N. Y. Faransso R. W. KruzicO. F. Hedden J. F. ManningB. Kellerhall W. C. McGaugheyE. K. Kietzman F. J. Sattler
SUBCOMMITTEE ON PRESSURE VESSELS (SC VIII)
T. P. Pastor, Chair R. W. MikitkaK. Mokhtarian, Vice Chair U. R. MillerA. J. Roby, Secretary C. C. NeelyR. J. Basile M. J. PischkeV. Bogosian M. D. RanaJ. Cameron S. C. RobertsR. M. Elliott C. D. RoderyR. E. Feigel K. J. SchneiderJ. G. Feldstein A. SelzJ. P. Glaspie J. R. Sims, Jr.M. J. Houle A. J. SpencerW. S. Jacobs E. A. SteenG. G. Karcher K. K. TamG. B. Komora E. L. Thomas, Jr.K. T. Lau E. Upitis
Subgroup on Design (SC VIII)
U. R. Miller, Chair K. MokhtarianR. E. Knoblock, Secretary T. P. PastorR. J. Basile M. D. RanaM. R. Bauman G. B. Rawls, Jr.M. R. Breach C. D. RoderyS. M. Caldwell A. SelzJ. R. Farr S. C. ShahJ. P. Glaspie J. W. StokesW. S. Jacobs K. K. TamG. B. Komora E. L. Thomas, Jr.R. W. Mikitka
Subgroup on Fabrication and Inspection (SC VIII)
C. D. Rodery, Chair R. A. JohnsonE. A. Steen, Vice Chair D. J. KreftJ. L. Arnold B. R. MorelockW. J. Bees F. C. OuyangH. E. Gordon M. J. PischkeM. J. Houle M. J. RiceW. S. Jacobs
Subgroup on General Requirements (SC VIII)
S. C. Roberts, Chair W. E. Laveck, Jr.V. Bogosian A. S. MannM. L. Coats C. C. NeelyD. B. Demichael A. S. OlivaresR. M. Elliott K. J. SchneiderJ. P. Glaspie A. J. SpencerK. T. Lau K. K. Tam
Subgroup on Materials (SC VIII)
J. Cameron, Chair W. M. LundyD. C. Agarwal E. E. MorgeneggW. D. Doty E. G. NisbettB. Heuer D. W. RahoiE. L. Hibner E. UpitisM. Katcher
Special Working Group on Graphite Pressure Equipment(SC VIII)
M. D. Johnson, Chair M. R. MinickG. Braussen T. A. PindrohF. L. Brown E. SoltowS. Malone A. A. Stupica
Special Working Group on Heat Transfer Equipment (SC VIII)
G. B. Komora, Chair U. R. MillerR. P. Zoldak, Secretary T. W. NortonG. Aurioles F. OsweillerS. M. Caldwell R. J. StastnyM. J. Holtz S. YokellR. Mahadeen
xviii
Special Working Group on High-Pressure Vessels (SC VIII)
J. R. Sims, Jr., Chair P. JanssonP. A. Reddington, Secretary J. A. KappL. P. Antalffy J. KeltjensJ. E. Baxter D. P. KendallR. C. Biel A. K. KhareD. J. Burns S. C. MordreP. N. Chaku G. J. MrazR. D. Dixon K. D. MurphyR. E. Feigel S. N. PagayD. M. Fryer E. H. PerezJ. L. Heck, Jr. D. T. PetersW. Hiller E. D. RollA. H. Honza J. F. SullivanV. T. Hwang F. W. TatarM. M. James
SUBCOMMITTEE ON WELDING (SC IX)
J. G. Feldstein, Chair B. R. NewmarkW. J. Sperko, Vice Chair P. P. NorrisJ. N. Shih, Secretary A. S. OlivaresD. A. Bowers M. J. PischkeM. L. Carpenter S. D. Reynolds, Jr.L. P. Connor M. J. RiceW. D. Doty G. W. Spohn IIIP. D. Flenner M. J. StankoM. J. Houle P. L. Van FossonS. Katz R. R. YoungW. M. Lundy W. K. Scattergood, HonoraryR. D. McGuire MemberA. H. Miller
Subgroup on Brazing (SC IX)
M. J. Pischke, Chair C. F. JeeringsM. L. Carpenter A. H. MillerM. J. Houle J. P. Swezy
Subgroup on General Requirements (SC IX)
B. R. Newmark, Chair D. W. MannP. R. Evans A. S. OlivaresP. C. Filean H. B. PorterR. M. Jessee R. A. WeissS. Katz K. R. Willens
Subgroup on Materials (SC IX)
M. L. Carpenter, Chair H. A. SadlerL. P. Connor C. E. SainzR. M. Jessee W. J. SperkoC. C. Kim M. J. StankoA. H. Miller R. R. Young
Subgroup on Performance Qualification (SC IX)
D. A. Bowers, Chair G. HerrmannV. A. Bell M. J. HouleL. P. Connor W. M. LundyR. A. Coomes R. D. McGuireR. B. Corbit P. P. NorrisP. D. Flenner G. W. Spohn IIIK. L. Hayes
Subgroup on Procedure Qualification (SC IX)
D. A. Bowers, Chair S. D. Reynolds, Jr.R. K. Brown, Jr. W. J. SperkoD. W. Mann J. P. SwezyA. H. Miller P. L. Van FossonP. P. Norris T. C. WiesnerA. S. Olivares P. R. WiltF. C. Ouyang
SUBCOMMITTEE ONFIBER-REINFORCED PLASTIC PRESSURE VESSELS (SC X)
D. Eisberg, Chair A. L. NewberryP. J. Conlisk, Vice Chair D. J. PainterA. J. Roby, Secretary D. J. PinellF. L. Brown J. R. RichterJ. L. Bustillos J. A. RolstonT. W. Cowley V. SanchezT. J. Fowler B. F. ShelleyL. E. Hunt J. H. SkaggsJ. C. Murphy D. O. Yancey, Jr.
SUBCOMMITTEE ONNUCLEAR INSERVICE INSPECTION (SC XI)
R. E. Gimple, Chair T. F. LentzR. L. Dyle, Vice Chair J. T. LindbergO. Martinez, Secretary W. E. NorrisW. H. Bamford, Jr. G. C. ParkR. L. Beverly P. C. RiccardellaC. D. Cowfer A. T. Roberts IIID. D. Davis W. R. RogersT. N. Epps III L. SageE. L. Farrow F. J. Schaaf, Jr.F. E. Gregor R. J. ScottO. F. Hedden J. C. Spanner, Jr.W. C. Holston J. E. StaffieraK. Iida R. W. SwayneR. D. Kerr R. A. YonekawaD. F. Landers K. K. Yoon
Honorary Members (SC XI)
S. H. Bush J. P. HoustrupL. J. Chockie L. R. Katz
xix
Subgroup on Evaluation Standards (SC XI)
W. H. Bamford, Jr., Chair S. RanganathM. Kupinski, Secretary P. C. RiccardellaJ. M. Bloom D. A. ScarthR. C. Cipolla W. L. ServerR. M. Gamble C. A. TomesT. J. Griesbach A. Van Der SluysK. Hasegawa K. R. WichmanP. J. Hijeck G. M. WilkowskiD. N. Hopkins K. K. YoonK. Iida S. YukawaY. Imamura
Working Group on Flaw Evaluation (SG-ES) (SC XI)
R. C. Cipolla, Chair J. S. PanesarG. H. De Boo, Secretary R. K. QashuW. H. Bamford, Jr. S. RanganathM. Basol D. A. ScarthJ. M. Bloom T. S. SchurmanE. Friedman W. L. ServerT. J. Griesbach F. A. SimonenF. D. Hayes K. R. WichmanD. N. Hopkins G. M. WilkowskiK. Iida K. K. YoonY. Imamura S. YukawaM. Kupinski A. ZahoorH. S. Mehta V. A. ZilbersteinJ. G. Merkle
Working Group on Operating Plant Criteria (SG-ES) (SC XI)
T. J. Griesbach, Chair R. PaceW. H. Bamford, Jr. J. S. PanesarH. Behnke D. W. PeltolaB. A. Bishop J. R. PfefferleW. F. Brady S. RanganathE. Friedman S. T. RosinskiS. R. Gosselin W. L. ServerP. J. Hijeck E. A. SiegelM. Kupinski F. A. SimonenS. D. Leshnoff G. L. StevensP. Manbeck K. K. YoonH. S. Mehta S. Yukawa
Working Group on Pipe Flaw Evaluation (SG-ES) (SC XI)
D. A. Scarth, Chair P. H. HoangG. M. Wilkowski, Secretary D. N. HopkinsW. H. Bamford, Jr. K. IidaR. C. Cipolla K. K. KashimaN. G. Cofie H. S. MehtaS. K. Daftuar J. S. PanesarG. H. De Boo K. K. YoonE. Friedman S. YukawaL. F. Goyette A. ZahoorK. Hasegawa V. A. Zilberstein
Subgroup on Liquid-Metal–Cooled Systems (SC XI)
C. G. McCargar, Chair R. HundalW. L. Chase R. W. KingS. Hattori W. Kwant
Working Group on Liquid-Metal Reactor Covers(SG-LMCS) (SC XI)
W. L. Chase, Chair R. HundalS. Hattori
Subgroup on Nondestructive Examination (SC XI)
J. C. Spanner, Jr., Chair T. N. Epps IIIC. J. Wirtz, Secretary D. O. HenryD. C. Adamonis M. R. HumN. R. Bentley G. A. LofthusB. Bevins J. J. McArdle IIIC. B. Cheezem M. C. ModesC. D. Cowfer F. J. Schaaf, Jr.F. J. Dodd M. F. Sherwin
Working Group on Personnel Qualification and Surface,Visual, and Eddy Current Examination (SG-NDE) (SC XI)
J. J. McArdle III, Chair D. SpakeM. F. Sherwin, Secretary J. C. Spanner, Jr.D. R. Cordes S. H. Von FuchsB. L. Curtis D. S. WhitcombD. O. Henry C. J. WirtzA. S. Reed
Working Group on Pressure Testing (SG-NDE) (SC XI)
D. W. Lamond, Chair R. J. CimochJ. M. Boughman, Secretary G. L. FechterT. M. Anselmi A. LeeT. R. Bugelholl J. K. McClanahanJ. J. Churchwell B. L. Montgomery
Working Group on Procedure Qualificationand Volumetric Examination (SG-NDE) (SC XI)
M. C. Modes, Chair T. N. Epps IIIB. Bevins, Secretary B. KellerhallF. L. Becker D. B. KingN. R. Bentley D. KurekC. B. Cheezem G. L. LaglederS. R. Doctor G. A. LofthusF. J. Dodd S. M. Walker
Subgroup on Repairs, Replacements, and Modifications (SC XI)
W. C. Holston, Chair R. D. KerrD. E. Waskey, Secretary D. F. LandersM. N. Bressler M. S. McDonaldR. E. Cantrell W. R. RogersP. D. Fisher R. J. ScottR. E. Gimple R. R. StevensonC. E. Hartz R. W. SwayneR. A. Hermann S. M. SwilleyT. E. Hiss R. A. YonekawaE. V. Imbro
xx
Working Group on Design Reconciliation (SG-RR&M) (SC XI)
T. E. Hiss, Chair E. V. ImbroJ. T. Conner, Secretary D. F. LandersS. B. Brown W. R. RogersE. B. Gerlach R. W. SwayneW. C. Holston A. H. Taufique
Working Group on Responsibilities and Program Requirements(SG-RR&M) (SC XI)
R. A. Yonekawa, Chair C. E. HartzR. R. Stevenson, Secretary M. F. HendricksS. K. Fisher M. S. McDonaldD. R. Graham S. M. Swilley
Working Group on Welding and Special Repair Process(SG-RR&M) (SC XI)
D. E. Waskey, Chair R. D. KerrR. E. Cantrell, Secretary C. C. KimG. Cheruvenki M. LauP. D. Fisher B. R. NewtonA. J. Giannuzzi P. P. NorrisR. A. Hermann J. E. O’SullivanR. P. Indap K. R. Willens
Subgroup on Water-Cooled Systems (SC XI)
G. C. Park, Chair D. W. LamondK. B. Thomas, Secretary T. F. LentzJ. M. Agold J. T. LindbergG. L. Belew M. P. LintzJ. M. Boughman W. E. NorrisW. J. Briggs C. PendletonT. R. Bugelholl J. E. StaffieraR. E. Ciemiewicz H. M. StephensD. D. Davis E. ThrockmortonR. L. Dyle S. M. WalkerE. L. Farrow R. A. WestO. F. Hedden J. WhitmanM. L. Herrera H. Graves, AlternateS. D. Kulat
Working Group on Containment (SG-WCS) (SC XI)
J. E. Staffiera, Chair H. T. HillH. M. Stephens, Secretary R. D. HoughH. G. Ashar C. N. KrishnaswamyW. J. Briggs W. M. LazearK. K. N. Chao M. P. LintzR. C. Cox D. NausM. J. Ferlisi S. C. PetitgoutH. Graves G. W. Robin
Working Group on Implementation of Risk-Based Examination(SG-WCS) (SC XI)
S. D. Kulat, Chair J. T. LindbergJ. M. Agold, Secretary I. MachS. A. Ali R. K. MattuB. A. Bishop A. McNeill IIIJ. W. Connor P. J. O’ReganH. Q. Do M. J. PaterakR. Fougerousse J. H. PhillipsS. R. Gosselin F. A. SimonenM. R. Graybeal R. A. WestM. L. Herrera D. S. Whitcomb
Working Group on Inspection of Systems and Components(SG-WCS) (SC XI)
E. Throckmorton, Chair I. MachJ. Whitman, Secretary T. K. McLellanG. L. Belew C. PendletonH. Q. Do C. M. RossR. Fougerousse D. SongM. R. Hum K. B. ThomasS. D. Kulat R. A. WestJ. T. Lindberg
Working Group on General Requirements (SC XI)
A. T. Roberts III, Chair R. K. MattuR. G. Edl, Secretary K. RhyneD. A. Jackson L. SageD. W. Kinley III R. J. ScottE. J. Maloney
Special Working Group on Editing and Review (SC XI)
R. W. Swayne, Chair L. SageR. L. Beverly J. E. StaffieraM. P. Lintz C. J. Wirtz
Special Working Group on Plant Life Extension (SC XI)
F. E. Gregor, Chair D. D. DavisM. P. Lintz, Secretary P.-T. KuoT. M. Anselmi W. M. LazearW. F. Brady T. A. Meyer
SUBCOMMITTEE ON TRANSPORT TANKS (SC XII)
A. Selz, Chair J. H. RaderP. D. Stumpf, Secretary M. D. RanaA. N. Antoniou C. M. SerratellaC. Becht IV S. StaniszewskiC. H. Hochman G. R. StoeckingerJ. E. Jones N. SurteesG. G. Karcher A. P. VargheseG. McRae S. V. VoorheesM. R. Minick C. H. Walters
xxi
Subgroup on Design and Materials (SC XII)
M. D. Rana, Chair T. P. PastorC. Becht IV J. L. RademacherD. A. Canonico T. A. RogersW. D. Doty C. M. SerratellaG. G. Karcher A. P. VargheseP. P. Laluc M. R. WardM. Manikkam E. A. WhittleS. L. McWilliams
Subgroup on Fabrication and Inspection (SC XII)
S. V. Voorhees, Chair L. D. HolsingerM. Burch J. E. JonesD. A. Canonico D. J. KreftM. L. Coats G. McRaeJ. J. Engelking M. R. MinickB. L. Gehl N. SurteesM. Hennemand
Subgroup on General Requirements (SC XII)
C. H. Hochman, Chair K. L. GilmoreT. Alexander J. C. KeenanD. M. Allbritten T. B. LeeC. A. Betts F. A. LicariJ. F. Cannon G. R. StoeckingerJ. L. Freiler C. H. WaltersW. L. Garfield L. WolpertM. A. Garrett
SUBCOMMITTEE ON BOILER ANDPRESSURE VESSEL ACCREDITATION (SC-BPVA)
A. J. Spencer, Chair B. C. TurczynskiC. E. Ford, Vice Chair W. J. Bees, AlternateK. I. Baron, Secretary V. A. Bell, AlternateM. B. Doherty M. A. DeVries, AlternateP. D. Edwards T. E. Hansen, AlternateR. M. Elliott L. J. Kuchera, AlternateR. C. Howard W. C. LaRochelle, AlternateB. B. MacDonald K. M. McTague, AlternateM. L. Sisk G. P. Milley, AlternateN. Surtees B. R. Morelock, Alternate
SUBCOMMITTEE ON NUCLEAR ACCREDITATION (SC-NA)
T. E. Quaka, Chair R. E. Ciemiewicz, AlternateR. R. Stevenson, Vice Chair S. Dasgupta, AlternateM. C. Tromba, Secretary P. D. Edwards, AlternateV. Bogosian S. M. Goodwin, AlternateM. N. Bressler D. H. Hanrath, AlternateG. Deily R. C. Howard, AlternateF. R. Drahos K. A. Huber, AlternateJ. E. Harris C. Lizotte, AlternateM. Higuchi A. A. Lotfi, AlternateM. Kotb M. R. Minick, AlternateW. C. LaRochelle J. W. Stokes, AlternateR. P. McIntyre T. Suzuki, AlternateH. B. Prasse O. E. Trapp, Staff Represen-A. T. Roberts III tativeA. J. Spencer
SUBCOMMITTEE ON DESIGN (SC-D)
D. P. Jones, Chair R. W. MikitkaE. H. Maradiaga, Secretary U. R. MillerR. W. Barnes W. J. O’DonnellC. Becht IV R. D. Schueler, Jr.M. R. Breach A. SelzG. G. Graven
Subgroup on Design Analysis (SC-D)
M. R. Breach A. KalninsP. J. Conlisk W. J. KovesR. J. Gurdal O. MaekawaJ. L. Hechmer G. TaxacherG. L. Hollinger E. L. Thomas, Jr.D. P. Jones R. A. Whipple
Subgroup on Elevated Temperature Design (SC-D)
C. Becht IV, Chair W. J. O’DonnellJ. M. Corum, Secretary D. A. OsageC. R. Brinkman J. S. PorowskiR. D. Campbell C. C. Schultz, Jr.D. S. Griffin L. K. SeverudR. I. Jetter D. F. ShawC. Lawton A. L. Snow
Subgroup on Fatigue Strength (SC-D)
W. J. O’Donnell, Chair C. LawtonP. R. Donavin S. MajumdarR. J. Gurdal M. J. ManjoineJ. A. Hayward J. MuscaraJ. L. Hechmer G. TaxacherD. P. Jones H. H. ZiadaG. Kharshafdjian
xxii
Subgroup on Openings (SC-D)
M. R. Breach, Chair J. P. MaddenR. W. Mikitka, Secretary D. R. PalmerG. G. Graven M. D. RanaV. T. Hwang E. C. RodabaughR. B. Luney
Special Working Group on Bolted Flanged Joints (SC-D)
R. W. Mikitka, Chair P. G. ScheckermannG. D. Bibel R. W. SchneiderE. Michalopoulos R. D. Schueler, Jr.S. N. Pagay A. Selz
SUBCOMMITTEE ONSAFETY VALVE REQUIREMENTS (SC-SVR)
M. D. Bernstein, Chair P. C. HackfordS. F. Harrison, Jr., Vice Chair F. HartU. D’Urso, Secretary C. A. NeumannJ. F. Ball J. W. ReynoldsS. Cammeresi D. J. ScallanJ. A. Cox A. J. SpencerR. D. Danzy J. C. StandfastD. B. Demichael J. A. WestR. J. Doelling T. J. Ferrigan, AlternateH. I. Gregg
Subgroup on Design (SC-SVR)
R. D. Danzy, Chair D. MillerD. B. Demichael A. J. SpencerR. J. Doelling T. R. TarbayH. I. Gregg J. A. West
Subgroup on General Requirements (SC-SVR)
J. C. Standfast, Chair C. A. NeumannJ. F. Ball J. W. ReynoldsJ. P. Glaspie J. W. RichardsonP. C. Hackford
Subgroup on Testing (SC-SVR)
S. F. Harrison, Jr., Chair K. C. RoyS. Cammeresi D. J. ScallanJ. A. Cox Z. WangF. Hart
PERSONNELOfficers of ASTM Committee
(Cooperating in the Development of the Specifications Herein)
As of December 31, 2001
E-7 ON NONDESTRUCTIVE TESTING
T. S. Jones, ChairJ. S. Brenizer, Jr., Vice ChairM. Carlos, Recording SecretaryC. V. Hughes, Membership SecretaryG. Luciw, Staff Manager
xxiii
A02