x

Ve s o

n 04 20 3

N ppon Automotive System N ppon Pa nts Tha and Co Ltd

0 MOO 3 SO SUKSAWAT 76 SUKSAWAT ROAD, T BANGCHAK A PRAPRADEANG

SAMUTPRAKAN 0 30 BANGKOK THA LAND

NIPPON PA iNT M SDN BHD 7516 H , Lo 17 Tiaman Pei indu(st ianil Sub) ang. Utam., a,

Ja a1n1SU 4 40300I Shah Alam , Selango Da .u Ehsan

1 1 , , I

Ve rsioi n 11,24/0/ 5/21017

Information

PRODUCT DESCRIPTION

NAX 2200 2K PRIMER GREY is a high quality 2K acrylic urethane primer-surfacer for automotive refinish and general use. It is designed for all spray application-form spot repair to overall repair.

Paint system •

•

•

•

High solid and provide excellent gloss holdout Excellent filling properties

Fast dry and goodsandability

Excellent adhesion

Surface preparation

• Ensure that surface of the previous coat was clean and dry, free from dirt, rust, grease, oil and other foreign matter. Before recoating, Nax Silicone off # 101 can be applied for cleaning and degreasing before wiped dry with clean and dry cloths. For old paint film, wet sanding P400-600 (hand) or dry sanding P240-320 (machine)

1/4

The Product is suitable strictly for professional use only. The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only.

Automotive System

Nax 2200 2K Primer Grey

Technical

x

Ve s o

n 04 20 3

N ppon Automotive System N ppon Pa nts Tha and Co Ltd

0 MOO 3 SO SUKSAWAT 76 SUKSAWAT ROAD, T BANGCHAK A PRAPRADEANG

SAMUTPRAKAN 0 30 BANGKOK THA LAND

NIPPON PA iNT M SDN BHD 7516 H, Lo 17 Tiaman Pei indu(st ianil Sub) ang. Utam., a Ja a1 n1SU 4 40300I Shah Alam , Selango Da .u Ehsan , . ,

1 1 , , I

Ve rsioi n 11,24/0/5/21017

Information

Application Guide

Mixing ratio Product NAX 2200 2K Primer Grey NAX 2200 2K Primer Hardener NAX Premila 503 SD Thinner 20% (spot repair) NAX Premila 503 SD Thinner 40% (full car)

By Volume 4 parts 1 part

By Weight 6 parts 1 part

Pot Life 2 hours after mixed with hardener @ 30°C

Application window

Temperature 15°C to 38°C & Relative Humidity – 20% to 85% (Lower temperatures may slow down the curing rate),

Spraying viscosity

Spray gun Set-up Nozzle size &

Gravity Feed full pattern, flow – 3 turns from fully closed set-up, 1.4 – 1.5 mm,

Spray pressure 3.0– 4.0kg/cm3

Drying times

Condition @ 30°C baking@60°C - 30 Dry to Sand (for full car) 60– 90 mins 3 . 0– 60 mins Dry to Sand (for spot repair) 20– 40 mins < 5 mins

2/4

Viscosity/sec @25°C

NK # 2 12 to 14

Ford Cup # 4 15 to 17

Automotive System

Nax 2200 2K Primer Grey

Technical

The Product is suitable strictly for professional use only. The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only.

x

Ve s o

n 04 20 3

N ppon Automotive System N ppon Pa nts Tha and Co Ltd

0 MOO 3 SO SUKSAWAT 76 SUKSAWAT ROAD, T BANGCHAK A PRAPRADEANG

SAMUTPRAKAN 0 30 BANGKOK THA LAND

NIPPON PAiNT M SDN BHD 7516 H, Lo 17 Tiaman Pei indu(str ainl Su)bang. Uta.m, a Ja a1 n1SU 4 40300I Shah Alam , Selango Da .u Ehsan , . ,

1 1 , , I

Ve sr oi n 11,24/0/5/21017

Information

Application

• Set time prior to force drying @ 60°C – 0 to 10

3/4

Number of spray coats

2 single coats

• Light to medium first coat

• Full wet second coat o Recommended dry film thickness – 40 to 60µm o Clean the spray gun immediately after use

Flash-off time

• Between coats - 5 minutes @ 30°C / 60% R.H.

minutes * The specified flash times may vary with temperature & air velocity in the spray booth.

Drying times

Flash-off time 0-10 minutes prior to moving the car or car part into a pre-heated drying oven booth @ 60°C.

All drying times listed below relate to standard application and object temperature.

Automotive System

Nax 2200 2K Primer Grey

Technical

The Product is suitable strictly for professional use only. The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only.

x

Ve s o

n 04 20 3

N ppon Automotive System N ppon Pa nts Tha and Co Ltd

0 MOO 3 SO SUKSAWAT 76 SUKSAWAT ROAD, T BANGCHAK A PRAPRADEANG

SAMUTPRAKAN 0 30 BANGKOK THA LAND

NIPPON PANiNTppoMn ASutDNomBoHDtive 7S5ys1t6eHm, Lo 17 NTiappmaonnPePaiindntsu(strThaanil aSundb)anCog. UtaLtdm., a, Ja a1n01SMU O4 O4033S0O0I SShUKahSAAaWmAT 76, SUKSAWAT

ROA Daru Ehsan

HAK A PRAPRADEANG Selango

D, T. BANGC , . , SAMUTPRAKAN 1 0130, BANGKOK, THAILAND

PrTECodHNucICAt LHaSEnRVdIliCnESgD&EPSAafRTeMEtyN(Tf,oNrIPPprOofNesPAsIiNoTnAaUl TOuseMOoTInVlyE)REFINISH

BUSINESS UNIT

NIPPON PA iNT M SDN BHD 7516 H , Lo 17 Tiaman Pei indu(st ianil Sub) ang. Utam., a Ja a1n1SU 4 40300I Shah Alam ,

Daru Ehsan Selango . , . , 1 1 , , I

Ve sr oi n 11,24/0/5/21017

Information

Product Handling & Safety (for professional use only)

Signal word: Warning •

•

•

•

•

•

•

•

Flammable liquid and vapor (Category 3) Harmful if swallowed (oral) & inhaled (vapour, dust, mist) (Category 4)

Causes skin irritation (Category 2)

Causes serious eye irritation (Category 2A) Suspected of causing cancer (Category 2)

Suspected of damaging fertility or the unborn child (Category 2)

May causes damage to lung kidney and liver (Category 2)

May causes damage to lung and Central Nervous System (CNS) through prolonged or repeated exposure (Category 2) Harmful to aquatic life (Category 3) •

Precautionary statements: •

•

•

•

•

•

•

Store in a closed container. Avoid release to the environment.

Keep away from heat/sparks/open flames/hot surfaces. Keep container tightly closed.

Do not allow to get in eyes, on skin, or on clothing.

Wear protective gloves/protective clothing/eye protection/face protection. IF INHALED: if breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.

IF COMES IN CONTACT WITH EYES: Rinse cautiously with excess water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

•

For further information please contact : TECHNICAL DEPARTMENT, NIPPON PAINT MALAYSIA

4/4

Please refer to Material Safety Data Sheets for full health & safety details and product can labels. Safety & Risk Phrases: Hardeners contains polyisocyanates and therefore safety precautions must be taken while use

Respiratory Mask

Safety Goggles

Protective Clothing

Protective Gloves

Safety Shoes

Automotive System

Nax 2200 2K Primer Grey

Technical

The Product is suitable strictly for professional use only. The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our products, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the products for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein are for general information purpose only.