NEWARE | GETTING STARTED

Neware Technology Limited | Battery Testing System Provider

neware.co

Hello

We’d first like to say thanks for your interest in Neware!

Over the next few pages, we’ve included some tips to help you use Neware battery testing system to discover

more about the batteries. As you get more acquainted with our battery testing system, we hope its

combination of simplicity and powerful features meets whatever needs you require when testing the batteries.

Best Regards,

The Neware Team

1

Contents

Electricity ConnectionSoftware Installation

& OperationBattery Connection

2

Electricity Connection

Correct Power Supply

You need to make sure the power supply you are going to

connecting the tester with meets requirements listed on the

information label of the tester.

And also, if the tester comes with a power cable, connect

correct leads to the power system.

Information Label

Power cable leads with function marked

(PE, N, L or L1/L2/L3)

3

Battery Connection

Kelvin Connection System

Each channel of Neware battery tester has at least four sensing

terminals – I+/V+ and I-/V-.

1. The voltage sensing should not be connected on the current

leads.

2. The current sensing should be connected tightly to improve

current passing capability.

Custom battery fixture available from us.

Kelvin Connection System

neware.co

Neware Tester

V+ I+ I- V-

4

Software Installation

LAN-based System

Neware battery tester functions a LAN device, using

TCP/IP to transfer data. Additionally there is SERVER IP to

be configured on the tester, identifying only the hosting

computer having an IP address of SERVER IP can control

this tester.

LAN-based System

5

Software InstallationSoftware Installation & Configuration

You may refer to below link for software package.

neware.co/community/software-packages

General BTS Server/Client

After the installation, you will have BTS Server and BTS Client on the computer. You may

also deploy BTS client and BTS server on separated computers.

Advanced Reporter/MES/LIMS for different scenarios.MySQL and BTS Service registered as Server

BTS Client installed

Application Tier User Interface BTSClient Reporter MES LIMS

Data Tier BTSServer/MySQL Commands Interpreter

Data Organization & Management Database

Hardware Tier

Middle Machine Flash Buffer / Commands / Uploaded

Data / Capacity Calculation

Bottom Machine Commands Output

Basic Data Acquisition

6

Software Installation

Channel Mapping

After you have SERVER IP set, you will see connected

testers on the left tree menu from BTS Client. You still

need to map the channels before you can operate each

one.

1. Click on the target number of the tester.

2. Choose Reset Map(M) *on the right click menu of the

right area from BTS Client.

3. You can choose 1*8 or 1*16 for Main channel mapping.

Channel Mapping

* User logged-in required. admin/neware for default.

7

Software Operation

Start a Test

After channels be mapped, you are now able to start a test

on selected channels.

Work steps can also be saved as a step file in XML file format

for future load.

Start a test

8

Software Operation

Data View

You can use View Data on right click menu of the selected

channel to view data. This will download data from the

server to your local file system and launch BTSDA to open.

BTSDA opens NDA data, rendering data in 2 parts – left is

the plotted curves and right is detailed records.

Data view by BTSDA

9

www.neware.co

Neware Technology Limited | Battery Testing System Provider