~new ~ used ~ rebuilt~ - e-zee milking equipment home … takeoff catalogl.pdf2 1-800-768-6166 e-zee...

Phone: 800-768-6166 • Fax: 717-768-7586Email: [email protected]

~neW ~ uSed ~ rebuilt~and PartS

TAKEOFF CATALOgTAKEOFF CATALOg

3910 E. Newport Road • Gordonville, PA 17529

E-Zee Milking Equipment, LLCHere to serve the dairy industry

“Customer Service is Our Goal”

1-800-768-6166 E-ZEE Milking EquipMEnt, llC ~ takEoff Division fax: 717-768-75862

INDEXbouMatic®........................................................................ Page 3-15delaVal®.......................................................................... Page 16-21WeStfalia®....................................................................... 2-29SurGe®............................................................................. Page 30-36Waikato®.......................................................................... Page 37uniVerSal®........................................................................ Page 38-41kleen-flo®....................................................................... Page 42nuPulSe®..........................................................................Page 43MiScellaneouS takeoff PartS.......................................... Page 44-46coPy rePlaceMent labelS................................................ Page 47order forM...................................................................... Page 48

PROdUCT dISCLAIMER - OCTOBER 2010 Our products are sold with a thirty (30) Day Satisfaction Guarantee. If you receive any used equiment in non-working condition, we will credit you 100% for it, if you notify us within thirty (30) days, except for special orders. Unless otherwise specifi ed, all electronic items are warranted for the shorter of ninety (90) days from the date of installation, or six (6) months from the date of purchase. (Example: If the item you purchased is not installed for four (4) months after the invoice date, then only two (2) months would remain under warranty. Unless otherwise stated, items listed as “NEW” have not been purchased from the original manufacturers. Where an item is a copy or reproduction of a brand name item it will usually be identifi ed, but not in all cases, with the word “copy”, “aftermarket” or “replacement”. Some rebuilt items are rebuilt with “copy” aftermarket parts. Such copies are not original to the manufacturer and have not been licensed by, recommended or endorsed by the manufacturer. All trademarks and service marks are the property of their respective owners. E-Zee Milking Equipment LLC is not an authorized dealer or representitive for DeLaval®, Universal®, Westfalia®, Surge®, IBA® and Bou-Matic®.

DeLaval™ and Universal™ are registered trademarks of DeLaval

Surge™ and Westfalia™ are registered trademarks of Westfalia-Surge Inc.

Bou-Matic™ is a registered Trademark of Bou Matic LLC.

This catalog consists of used and rebuilt takeoffs, however, we cannot guarantee stock and availability on any items. Some takeoffs are almost always available while others are rarely available.

The ones that are rarely available are usually labeled (RA).

ALL REBUILT TAKEOFFS COME WITH A 90 DAY WARRANTY - AFTER INSTALLATIONOR 6 MONTH MAXIMUM, FROM INvOICE dATE.

PLEASE NOTE: A lot of our new items are replacement copy parts, and are not oRiginal. These NEW items have not been purchased from their original manufacturers

and the manufacturers names are being used as a reference, ONLY. For further information please read our product disclaimer below.

TAKEOFF CATALOg~neW ~ uSed ~ rebuilt~ and PartS

E-ZeeMilking Equipment, LLCHere to serve the dairy industry

“Customer Service is Our Goal”

1-800-768-6166 E-ZEE Milking EquipMEnt, llC ~ takEoff Division fax: 717-768-7586 3

Software Upgradeable

High Durabilty

Low Maintenance

Optional Air Operation Detaching & Shutoff

PERFECTION 3000M

123390 -3000M

All VacuumOperated

REBUILT BOUMATIC®

Software Upgradeable Software Upgradeable

High Durabilty High Durabilty

Low Maintenance Low Maintenance

Optional Ai Optional AiDetaching & Shutoff

PERFECTION 3000M

123390 -3000M

All VacuumOperated

Software Upgradeable

r Operation

1000 VCOMPANIONFOR STALL BARN

123530

Lightweight durable design

Adjustable milk letdown delay

Full-Flow sensing

Non-restrictive shutoff

Lightweight Lightweight durable design

Adjustable milk Adjustable milk letdown delay

Full-Flow sensing Full-Flow sensing

Non-restrictive Non-restrictive shutoff

plEasE spECifY CuRB Mount oR linE Mount BRaCkEt

78490

99150

OPTIONAL vACUUM SHUTOFFS

PLEASE SPECIFY WHEN ORdERINg

123410 - 3200M Vacuum Takeoff /Air Shutoff

123430 - 3400M - All Air Operated

123535 - Milk Yield Indicator, use this part number in

addition to the Takeoff Part #

Above

ALSO AvAILABLE WITH MILK YIELd

INdICATOR


REBUILT BOUMATIC® ALL AIR

Heavy Duty Stainless Steel construction with chain detaching

Comes standard with 5/8” sensor/shutoff combo, and black chassis circuit board

1/4” air line tubing

Speed controller

2100D

123060*see below

Heavy Duty Stainless Steel construction with chain detaching

Comes standard with 5/8” sensor/shutoff combo, and black chassis circuit board


Speed controller

123180*see below

2101D

OPTIONAL INTERCHANgEABLE BOARdS

123603 - Used Original silver board

with chassisONLY

85430 - New Replacement Circuit board with stainless

chassis ONLY

*also availaBlE with USED OR NEW REPLACEMENT silver chassis circuit board (as shown) for an additional cost

Use part 123375 - in addition with Takeoff Part # above

plEasE spECifY usED oR nEW CopY WHEn oRDERingtHEsE BoaRDs aRE also solD sEpaRatElY as nuMBERED BEloW.

both of theSe unitS are rebuilt With NEW coPy air cylinderS and SolenoidS


2000V Heavy Duty stainless steel construction Vacuum operated cylinder Comes with a speed control and a black chassis circuit board

Heavy Duty Stainless steel construction Box features the quick open latches for quick and easy access to the circuit board Humphrey 420 solenoid Comes with a speed control and a silver chassis circuit board

3000D

123420 - 3200D Vacuum Takeoff /Air Shutoff123440 - 3400D - Air Takeoff /Air Shutoff

123395Vacuum TakeoffVacuum Shutoff

REBUILT BOUMATIC®

123000*see botttom of

page 4

OPTIONAL INTERCHANgEABLE SENSOR/SHUTOFFS ANd SHUTOFFS ONLY

99150 - 3/4” plastic shutoff

assembly, vacuum operated

MOUNTING BRACKET NOT INCLUDED

99173 - 3/4” curb mount bracket

99172 - 5/8” curb mount bracket

99160 - 3/4” plastic air operated shutoff assembly

MOUNTING BRACKET NOT INCLUDED 91810 - 3” milk line

clamp with gasket

Line Mount Air Sensor/shutoff

SUBJECT TO AvAILABLILITYPLEASE SPECIFY WHEN ORdERINg

Curb Mount Vacuum Sensor/

shutoff

Line Mount Air Sensor/shutoff

Line Mount Vacuum Sensor/

shutoff

99777 - SolenoidMUST BE USEd IF YOU

SELECT ONE OF THE UPgRAdES

78490 - Vacuum operated milk line shutoff

for 5/8” or 3/4” hose~NORMALLY CLOSED~

OPTIONS FOR NORMALLY OPENFOR 3000 SERIES TAKEOFFS

78491 - Solenoid adap-tor nipple for plastic

shutoff78492 - 3/16” x 12”

hose for plastic shutoff to solenoid adaptor nipple

99751 - Clear shutoff diaphragm

Curb Mount Air Sensor/

shutoff


REBUILT BOUMATIC® - ALL vACUUM

4400D

123490

4200D4200D

123490

Keypad style controls

Cylinder mount solenoid

3/4” line mount sensor/shutoff

Touch Sensitive Controls

External indicator lamps

Cylinder mount solenoid

3/4” curb mount sensor/shutoff

123480

OPTIONAL:3/4” curb mountsensor/shutoff

OPTIONAL:3/4” Line mount sensor/shutoff


4600D

Hose SupportThis hose support is

available as an option for BM Air Takeoffs

Air cylinder detaching


External indicator lamps

Speed controller


3/4” curb mount sensor/shutoff

4600D Air cylinder detaching Air cylinder detaching


External indicator lamps External indicator lamps

Speed controller Speed controller

5/32” air line tubing 5/32” air line tubing

3/4” curb mount 3/4” curb mount sensor/shutoff

REBUILT BOUMATIC®

OPTIONAL:- 3/4” Line mount

sensor/shutoff- Hose support arm

123510

4000D

123450

Vacuum cylinder detaching

Keypad style controls

5/8” curb mount sensor

Economical Unit

123660

suBJECt toavailaBlilitY


BOUMATIC® USEd PARTS

123795 - Used keypad for

metering style takeoff

123750 - Used Heavy

duty motor and gearbox

123600 - Used black style board

for 2000/2100 takeoff, 1½

minute

123635 - Used 2000V sensor

123605 - Used 5/8” 2100/2101

sensor

123630 - Rebuilt 2000V

shutoff


TAKEOFFS FOR BOUMATIC®

~ 2000 SerieS123000 - Rebuilt 2000V w/ speed control, blue label, black board 123030 - Rebuilt 2000V w/o speed control, blue label, black board 123060 - Rebuilt 2100D w/NEW air cylinder & NEW solenoid, black board 123180 - Rebuilt 2101D w/NEW air cylinder & NEW solenoid, black board 123375 - Add per unit f/silver chassis board on 2000 series

123160 - Rebuilt 2100M w/Perfection meter 123335 - Rebuilt 2101M w/Perfection meter 123365 - Rebuilt 2000VM w/Perfection meter 123330 - Rebuilt 2101M w/Precision meter 123360 - Rebuilt 2000VM w/Precision meter NOTE: Precision is older style and Perfection is newer style

~ 3000 SerieS 123390 - Rebuilt 3000M w/Perfection meter, all vacuum 123395 - Rebuilt 3000D w/silver board, all vacuum 123410 - Rebuilt 3200M w/Perfection meter, vacuum takeoff, air shutoff 123420 - Rebuilt 3200D w/silver board, vacuum takeoff, air shutoff 123430 - Rebuilt 3400M w/Perfection meter all air 123440 - Rebuilt 3400D w/silver board all air

~ 4000 SerieS123450 - Rebuilt 4000D (IA) 123480 - Rebuilt 4200D w/keypad control 123490 - Rebuilt 4400D w/touch sensitive control 123510 - Rebuilt 4600D

~ Portable Stall barn takeoff 123530 - Rebuilt 1000V Companion123525 - Used 2” blue One Touch inlet for Companion (IA)123526 - Used 2½” blue One Touch inlet for Companion (IA)123527 - Used 3” blue One Touch inlet for Companion (IA)

MISC. TAKEOFF PARTS123600 - Used black style board for 2000/2100 takeoff, 1½ minute 123602 - Used black style board for 2000/2100 takeoff, 3 minute 123603 - Used silver style board for 2000/2100 takeoff 123910 - Used 4200/4400/4600 series circuit board123610 - Used curb mount air sensor (IA) 123615 - Used line mount air sensor (IA) 123620 - Used curb mount vacuum sensor (IA) 123625 - Used line mount vacuum sensor (IA) 123605 - Used 5/8” 2100/2101 sensor (IA) 123630 - Rebuilt 2000V shutoff 123635 - Used 2000V sensor (IA) 123660 - Rebuilt 2100 hose support 123855 - Used 12 unit power supply for BM 123857 - Used 16 unit power supply for BM

~ Perfection Meter PartS 123800 - Used board (IA) 123805 - Rebuilt left hand meter (IA) 123810 - Rebuilt right hand meter (IA) 123815 - Rebuilt Perfection meter with circuit board 123835 - Used outlet assembly 123848 - Used butterfat sampler (RA) 123795 - Used keypad 123797 - Used white air shutoff 123799 - Used black air shutoff ~ PreciSion Meter PartS 123720 - Used silver style board 123750 - Used heavy duty motor and gearbox 123758 - Used gearbox ONLY 123760 - Used heavy duty motor ONLY 123765 - Used rotor (IA) 123770 - Used reed switch assembly 123776 - Used jar for round style 123778 - Used jar for square style 123781 - Used lid for jar for round style 123783 - Used lid for jar for square style 123790 - Used clear 5/8” air shutoff 123793 - Used blue 9/16” air shutoff NOTE: older style is with round motor cover and newer style is with square motor cover

BOUMATIC® USEd PARTS


NEW REPLACEMENT PARTS THAT FIT BOUMATIC® TAKEOFFS

99771 - 18” cylinder for 2100 99773 - 15” cylinder for 2700

99804 - Stainless chain cut in 50” lengths for BM air takeoff 96030 - Stainless chain per foot

43112 - Rectifi er, 35 amp85306 - Capacitor with holder85309 - 120 volt M.O.V.85312 - Lightning arrestor85314 - Line fi lter85317 - Fuse holder85323 - 5 AMP fuse85321 - On/off toggle switch91836 - Toggle switch cover85325 - 120 volt AC input/11/24 volt AC output transformer

99385 - Clear bulb for

2000/2100

REPLACEMENT PARTS FOR POWER SUPPLY

85335 - POWER SUPPLY FOR 16 TAKEOFF UNITS, ALL STAINLESS BOX

99766 - 3/4” x 1 7/8” stainless

fl at washer for top

99767 - 3/4” x 16” stainless hex jam nut for top

99768 - 7/16” x 20” stainless

hex jam nut for rod

99387 - Amber LED bulb only for 2000/2100

99388 - Red LED bulb

only for 2000/2100

NEW ITEMS

99389 - Replacement Amber LED bulb, with lead

99390 - Replacement

Red LED bulb, with lead



MISCELLANEOUS PARTS 92241 - Cylinder bottom (for 2000, 3000, 4200 and 4400)98789 - ¼” Nylon rope (sold per foot)99689 - Sealing washer (for 2000/3000 and 4200/4400 piston)99703 - Palm push button99890 - 2½” x 5/8” stainless nipples (for 2000/3000 milk hose) ~ CUSTOM SIZES AVAILABLE ~ 99712 - 2 AMP fuse (for 2000 and 3000 Series Boards)99782 - Shuttle valve (for 2100)99726 - 1/4” O.D x 1/8” I.D. air tubing....specify color (for 2100)99830 - Rubber shutoff hose .62” x 3.25” (for 2100 or 2101 clear air sensors) 99802 - Cable for Precision meter, 10’ long99715 - O-ring for old style meter lid (style of lid with 2 ears)99791 - Bushing for 2100 hose support (uses 2)

97825 - 5” x 24” Tie rod air cylinder for BM crowd gate, 1 3/8” rod, copy (includes clevis bracket)

92241

99703

99830

99782

99791

99885 - Plunger assembly for new style sensor

99886 - Plunger only, for new style sensor

99751 - Diaphragm only, for new style sensor

99875 - One Piece Plunger assembly for new style BM

sensor

85430 - New Style Kleen-Flo replacement Circuit Board with stainless chassis for 2000 and 3000 Series

Regulated valve and lamp outputs 100 to 4,600 OHM sensitivity range 1½ or 3 minute letdown time Features milk sweep function Incandescent/LED lamp capability Press either button when unit is in “sleep” mode, and it goes into “wash” mode

2 YEAR WARRANTY

85437 - Wiring harness for

85430 circuit board, less board connector


99753 - White

diaphragm

99851 - 6 piece ~ parts kit ONLY

99756 - Diaphragm for 2000V shutoff

99720 - Grey nylon fi lter/muffl er for

2000/3000 series speed control head

99675 - Piston seal for 2000/3000 and 4200/4400 series

cylinder

99719 - Metal fi lter/muffl er for 2000/3000 series

solenoid

99780 - Solenoid valve for Perfection meter

99865 - Diaphragm

assembly

INCLUdES: 99753 - White diaphragm

99840 - Large seal, (uses 2) 99842 - Red silicone seal

99844 - Plug99847 - Small thin black o-ring

INCLUdES:99753 - White diaphragm

99840 - Large seal, (uses 2) 99842 - Red silicone seal

99844 - Plug99847 - Small thin black o-ring

99852 - Stainless plate99856 - Stainless insert99858 - Stainless spring

99861 - Plastic threaded nut99863 - Stainless bolt

99865 - Diaphragm assembly

COPY KITS ANd PARTS FOR BM PERFECTION METER

99575 - Keypad for BM metering

takeoff

99850 - Complete service kit


99695 - Replacement Touch Switch

NEW ITEM


99425 - Handle with Companion

fl ex switch99423 - Handle,

ONLY

99423- Handle,

ONLY

99420 - Companion fl ex switch

92414 - 2 pin terminal






TERMINALS FOR BM CIRCUIT BOARdSNEW ITEMS

99779 - 3 way Solenoid for 2000V and 2000VM

99777 - 4 way

Solenoid for 3000 series

24 volt DC

24 volt DC

99775 - Solenoid for 2100 or

2101

99455 - Molded shutoff diaphragm for Companion

or 4000D takeoff

99475 - U shaped shutoff hose for

Companion99460 - 3.125 piston seal for Companion or

4000D takeoff

24 volt DC



99882 - Kleen Flo Air Sensor Assembly, ¾”

99880 - KLEEN FLO SENSOR ONLY

99881 - Kleen Flo Vacuum Sensor Assembly, ¾”

REPLACEMENT SENSOR ASSEMBLIES FOR TAKEOFFS

99880 - KLEEN FLO SENSOR

10060 - Stainless bottom bracket with chain bushings10070 - Stainless chain shield99742 - Stainless top mounting bracket for 210099729 - Stainless retaining ring (for white chain bushing) 99807 - White chain bushing (for bottom bracket)99749 - Stainless U-bolt (for #99740 and #10060 bracket)99817 - Stainless mounting bracket with 2 clamps (for new style BM curb mount sensor)99817-1 - Side clip for 99817 bracket99819 - Stainless bracket for 2100 sensor91767 - Stainless curb mount hose support bracket 99746 - Stainless hose clamp (for #99740 bracket)99740 - Stainless mounting bracket (for the 2000, 2101, 3000, 4200, 4400, 4600)99825 - Stainless wall mounting bracket (for Perfection 3000 meter)99340 - Handle bracket (for Companion)99462 - Washer plate (for Companion)

10060 10070

91767

99740

99817

99825

REPLACEMENT BRACKETS ANd MOUNTINg HARdWARE


REPLACEMENT SHUTOFF ASSEMBLIES FOR TAKEOFFS

99150 99160

Available with air or vacuum operated top

Plastic breakaway kit included

Mounting brackets not included

99889

91810

99173

99180

99146 - Plastic body only for 9916099150 - 3/4” plastic vacuum operated shutoff assembly, mounting bracket not included99160 - 3/4” plastic air operated shutoff assembly, mounting bracket not included99180 - Breakaway clamp kit99185 - Silicone gasket99177 - Breakaway spring clamp99175 - Breakaway clamp half only, 2 needed99148 - Vacuum top assembly, with nut99172 - 5/8” stainless curb mount bracket99173 - 3/4” stainless curb mount bracket91810 - 3” stainless milk line clamp91811 - Gasket for 3” stainless milk line clamp99885 - Plunger assembly 99886 - Plunger, only99875 - NEW One Piece Plunger assembly99889 - Blue nut

PARTS FOR AIR ASSEMBLY ONLY99155 - Top assembly, with nut99162 - Shut off top, only99163 - Insert for top99164 - Snap ring for top99165 - Flat washer for top99166 - Screw for top99167 - Spring for top99168 - O-ring for top 99169 - U-cup for top99170 - Sealing washer

99155

99148


REBUILT dELAvAL® - ALL vACUUM

PORTABLE SST#2

PORTABLE vACTROL

Float style 5/8” sensor

12 volt AC operation

End of milk indicator

With Dellatron 200B pulsator

Available in 60/40, 65/35, or 70/30 pulsation

PARLORvACTROL

Variable Pulsation


Milk Metering

End of Milk Indicator

Rotary style Detaching

Optional Multi Grip Connector

115150 115390

115210


Economical unit

No Electricity is required

115240


Economical unit

No Electricity is required

Optional Vacuum or electronic pulsator available upon request

MILK MASTER

plEasE spECifY Ratio nEEDED upon oRDERing


REBUILT dELAvAL® - ALL vACUUM

PARLOR SST#2

VAC/ATM bayonett control valve


Network compatible with AlPro Processor

On board pulsation controller

Optional ATM/ATM or VAC/VAC control valve.

115420

Stainless steel cylinder and box


End of milk indicator

Line mount control valve

Vertical sensor inlet

Comes with a NEW copy silicone keypad and adaptor board for the following circuit boards: 5.2, 5.3, or 6.1 (please specify which version needed upon ordering)

Optional Parts Available: • Plastic cylinder • Horizontal sensor inlet

115000

Float Sensor

ALPRO WITH

FLO MASTERPRO METER

115035

Stainless steel cylinder and box


Bayonett mount control valve

Comes with a NEW copy silicone keypad and version 2038 button board

Optional Part Available: Plastic cylinder

HFCSensor

Also Available:115030 - Same Unit but with

Bayonett control valve


dELAvAL® MISC. USEd PARTS

115960 - Used 4.2 version board for plastic SST #2

ALL BOARdS ARE TESTEd ANd WORKINg BEFORE

SENdINg ANd COME WITH A 90 dAY WARRANTY

115930 - Used 5.2 version SST#2 board


116020 - Rebuilt plastic

cylinder

115780 - Rebuilt galvanized ARM

linkages, w/stainless bars

115810 - Rebuilt stainless ARM linkages

with galvanized base

PLEASE SPECIFY RIgHT HANd OR LEFT HANd STYLE

UPON ORdERINg. PICTURES SHOWN ARE

RIgHT HANd.

115570 - Used line mount SST#2 control

valve-rebuilt115510 - Used SST#2 Deluxe or Plato keypad

115720 - Used FloMaster 2000 load

cell with board


115897 - Used 2038 version board for SST#2, MP370 or MP 380


dELAvAL® USEd PARTSTAKEOFFS FOR dELAvAL® ~ SSt #2 takeoffS115000 - Rebuilt all stainless SST#2, float sensor, with line mount valve 115030 - Rebuilt all stainless SST#2, float sensor, with bayonnet valve 115035 - Rebuilt all stainless SST#2, bayonnet valve, used HFC 16mm sensor 115036 - Rebuilt all stainless SST#2, bayonnet valve, used HFC 19mm sensor 115045 - Rebuilt all stainless SST#2, bayonnet valve, NEW HFC 16mm sensor 115046 - Rebuilt all stainless SST#2, bayonnet valve, NEW HFC 19mm sensor 115060 - Rebuilt SST#2 Deluxe, with Flomaster 2000 meter115089 - Rebuilt SST#2 S/S box - plastic cylinder, float sensor, bayonett valve 115090 - Rebuilt SST#2 S/S box - plastic cylinder, float sensor, line mount valve 115120 - Rebuilt all plastic SST#2, float sensor, line mount valve~ Portable Stallbarn takeoffS115390 - Rebuilt Milkmaster115150 - Rebuilt portable SST#2, with Dellatron pulsator115240 - Rebuilt portable Vac-trol, without pulsator115300 - Rebuilt portable Autocord~ MiScellaneouS takeoffS115420 - Rebuilt Alpro, with FloMaster Pro meter115180 - Rebuilt Plato, with float sensor and s/s arm115210 - Rebuilt Parlor Vac-trol115270 - Rebuilt Parlor Autocord115330 - Rebuilt ARM I, with galvanized arm115360 - Rebuilt ARM II, with galvanized arm

TAKEOFF PARTS FOR dELAvAL®

~ SSt#2 takeoff PartS 115480 - Used keypad for stainless SST#2 115510 - Used SST#2 Deluxe or Plato keypad 115515 - Used Plato solenoid valve 115540 - Used plastic keypad for SST#2 or ACR 5000 (IA) 115568 - Rebuilt bayonett SST#2 control valve 115570 - Rebuilt line mount SST#2 control valve 115897 - Used 2038 version board for SST#2, MP370 or MP 380 115900 - Used 6.1 version SST#2 board 115915 - Used 5.3 version SST#2 board 115930 - Used 5.2 version SST#2 board 115960 - Used 4.2 version SST#2 board 116020 - Rebuilt plastic cylinder 116050 - Used 12 volt AC transformer (IA) 117388 - Used white base plate for SST#2 control valve117390 - Used coil for SST#2 control valve ~ SSt#2 SenSor PartS 115590 - Used complete vertical SST#2 sensor assembly - float style 115595 - Used complete horizontal SST#2 sensor assembly - float style 115600 - Used SST#2 jar, 5/8” 115630 - Used vertical SST#2 inlet 5/8” (IA) 115637 - Used horizontal SST#2 inlet 5/8” (IA) 115660 - Used SST#2 float 115690 - Used SST#2 black sensor jar holder ~ MilkMaSter takeoff PartS116100 - Used Milkmaster Powerhouse (IA)116110 - Used 2” multi coupler (IA)116112 - Used 2½” multi coupler (IA)116114 - Used 3” multi coupler (IA) 116125 - Used Milkmaster board (RA) ~ arM takeoff PartS 115780 - Rebuilt galvanized ARM linkages, w/stainless bars 115810 - Rebuilt stainless ARM linkages, w/galvanized base 115840 - Used galvanized A link 115870 - Used galvanized B link, w/new nylon bushings 115885 - Rebuilt ARM I pinch off w/new copy pinch cylinder 115990 - Used ARM I Board 115995 - Used ARM I solenoid 115997 - Used ARM II solenoid ~ alPro and floMaSter 2000 takeoff and Meter PartS 115450 - Used Alpro MPC 1 115453 - Used Alpro MPC 2 (IA)115455 - Complete rebuilt Alpro meter 115458 - Used Alpro load cell, w/board 115465 - Used FloMaster 2000 or Alpro, meter lid 115467 - Used FloMaster 2000 or Alpro, meter body 115469 - Used FloMaster 2000 or Alpro, meter cup115720 - Used FloMaster 2000 load cell, w/board 115750 - Used FloMaster 2000 meter board, pound 115755 - Used FloMaster 2000 meter board, kilo 116080 - Used old style FloMaster meter lid (style w/4 lid screws)


98795 - Bushing for

Plato arm

NEW REPLACEMENT PARTS THAT FIT dELAvAL® TAKEOFFS

85035 - Silicone keypad, with stainless cover and

connector board to adapt to SST#2® 5.2, 5.3 or 6.1 boards

85020 - Keypad with connector board, LESS stainless

cover

85070 - Silicone keypad, only

85076 - Connector board only, for E-Zee keypad

85040 - Replacement keypad kit with rebuilt circuit board

(Specify what version board needed 5.2, 5.3 or 6.1)

98769 - Stainless box with cover for SST#2, Deeper for HFC sensor

98771 - Stainless box with cover for SST#2 and silicone style keypad

(as shown)

98721 - Stainless cylinder for SST# 2,

w/rope

98731 - Stainless cylinder for SST# 2,

w/stainless chain

98723 - Stainless horizontal cylinder for

SST# 2, w/rope and pulley

98745 - Pinch cylinder for ARM I98747 - 12” Retract cylinder for ARM I or II98749 - 14” Retract cylinder for Plato98751 - 16” Counter balance cylinder for Plato 98754 - 12 volt DC Mac

valve for ARM II or Plato takeoffs

91805 - Stainless L shaped bracket for SST#2

98738 -Clamp for 2” stainless cylinder with ½” thread

98741- Clamp for 3” plastic cylinder with ½” thread

(These 3” copy clamps can be used on: Plastic VSO, Little Champ and Plastic SST#2)

Standard length is 39½”Custom Sizes Available

98575 - HFC sensor board for DL

AIR CYLINdERS

PARTS FOR SST#2

92241 - Cylinder bottom for stainless SST#2 (rope style)

92239 - Cylinder bottom for stainless SST#2 (chain style)

92473 - Cylinder bottom w/pulley assem-bly for stainless SST#2

(for chain or rope)

91805 - Stainless L shaped bracket for SST#2

98706 - Chain for ARM I or II, 88” 98707 - Chain for Plato, 63”


#98702 - Reed switch for SST#2 or ARM

takeoffs

99760 - Label

98805 - Wear plate for ARM I or II takeoff linkage98802 - Start/Remove switch for ARM I 98810 - SRK - SQE1 exhaust repair kit for ARM I or II98811 - SQE1 exhaust for ARM I or II98717 - Strap to mount stainless SST#2 cylinder to stainless box98719 - Strap to mount plastic SST#2 cylinder to stainless box98720 - Adaptor plate to mount stainless SST#2 box to plastic cylinder98713 - Bracket for HFC sensor98710 - HFC Sensor Diaphragm98704 - 3 strand wire harness for SST#2 control valve, copy, 7’ long98705 - 4 strand wire harness for SST#2 control valve, copy, 7’ long98790 - 3/16” Nylon rope (sold per foot)91819 - Bulb for ARM I98756 - Bulb for SST#2 or ARM II98460 - MM25 gasket

NEW REPLACEMENT PARTS THAT FIT dELAvAL® TAKEOFFS

MISCELLANEOUS COPY PARTS

98648 - Inner seal for motor

98653 - Filter, Includes clip

98660 - Rubber rebuild kit for sensor

98647 - Outer seal for motor

20164 - Gasket for SST#2 inlet...........

20165 - Shutoff diaphragm for SST#2 inlet............

98695 - Sensor jar for SST#2

98625 - Rubber rebuild kit for Amplifi er

98655 - Ball for rope

98950 - Cover kit for SST#2 control valve98951 - Blue cover gasket98952 - Fresh air nipple only98953 - Fresh air screen only98954 - Blank plug (replaces screen)98949 - Grommet for wiring harness,98703 - Flag terminal SST#2 or Milkmaster98960 - Repair kit for Milkmaster pulsator, copy43315 - 12 volt coil for SST#2 or Milkmaster...............43317 - Magnetic plate for SST#2 or Milkmaster..........

- Repair kit for Milkmaster pulsator, copy

Milkmaster...............

PARTS FOR MILKMASTER

NEW ITEM

98805 98713

98460

- Adaptor plate to mount stainless SST#2 box to plastic cylinder

- 3 strand wire harness for SST#2 control valve, copy, 7’ long - 4 strand wire harness for SST#2 control valve, copy, 7’ long

NEW ITEM

98710


METATRON 12 Solenoid valve is mounted inside control box

Compatible with Farm Plan software

Can also be used as a stand alone unit

*also availaBlE:143030 - w/030 circuit board 143005 - w/050 circuit board143010 - w/070 circuit board

REBUILT WESTFALIA® - ALL vACUUM

Heavy duty stainless steel control box

Compatible with Farm Plan software

Can also be used as a stand alone unit

143040143000*w/040 circuit board

METATRON 12 APEX


ACR# 3 STIMOPULS MA PORTABLE

Push button starter

Stainless steel construction

5/8” Canister style sensor


On-board pulsation with stimulation

Optional Remote attach/detach button

Lightweight durable design


143120

ACR-SS

construction

style sensor

143270

3/4” Visofl ow sensor

On-board pulsation with stimulation

Solenoid valve is mounted inside the control box


143210

also availaBlE:143245 - With a 5/8” canister style sensor

REBUILT WESTFALIA® - ALL vACUUM


On-board pulsation with

Solenoid valve is mounted inside the control box


143300

Touch sensitive starter

Stainless steel construction



143120143120


plEasE spECifY CuRB Mount plEasE spECifY CuRB Mount oR linE Mount BRaCkEt




WESTFALIA® MISC. USEd PARTS

143480 - Used 030 Metatron

board


board


board

143512 - Used 070 Metatron board

143492 - Used connector board for 020 or 030

version boards

144650 - Used

ribbon style board for ACR 3 or Stimopuls

MA

143450 - Rebuilt

ACR Sensor

144280 - Used solenoid coil for Metatron 12, ACR 3 or

Stimopuls MA (IF AVAILABLE)


WESTFALIA® USEd PARTS

TAKEOFFS FOR WESTFALIA® ~ Metatron takeoffS143030 - Rebuilt Metatron 12, with 030 board 143000 - Rebuilt Metatron 12, with 040 board 143005 - Rebuilt Metatron 12, with 050 board (IA) 143012 - Rebuilt Metatron 12, with 070 board (IA)143040 - Rebuilt Metatron APEX (IA) 143060 - Rebuilt Metatron 12, with Arm (RA) 143095 - Add per unit for new meter body

~ acr Style takeoffS 143270 - Rebuilt ACR SS, with 5/8” sensor 143300 - Rebuilt ACR SS, with used Visoflow sensor 143330 - Rebuilt ACR SS, with NEW Visoflow sensor 143360 - ACR SS Style, with s/s copy box & copy # 85350 curcuit board & 5/8” sensor 143390 - ACR SS Style, with s/s copy box, copy # 85350 curcuit board & USED Visoflow sensor 143420 - ACR SS Style, with s/s copy box, copy # 85350 curcuit board & NEW Visoflow sensor 143495 - Rebuilt ACR 1, all plastic143180 - Rebuilt ACR 2, with 5/8” sensor 143210 - Rebuilt ACR 3, with USED Visoflow sensor 143240 - Rebuilt ACR 3, with NEW Visoflow sensor 143245 - Rebuilt ACR 3, with 5/8” sensor ~ Portable Stallbarn takeoffS 143120 - Rebuilt Stimopuls MA 143130 - Rebuilt Dematron 50T (RA) TAKEOFF PARTS FOR WESTFALIA® ~ Metatron takeoff PartS 143482 - Used 020 Metatron board, only 143480 - Used 030 Metatron board, only 143490 - Used 040 Metatron board, only 143494 - Used 050 Metatron board, only (IA)143510 - Used 070 Metatron board, only (IA)143492 - Used small connector board for 020 or 030 version boards 143505 - Used Metatron box cover (IA) 143510 - Rebuilt Metatron 12 solenoid (IA) 144280 - Used solenoid coil (IA)143520 - Used Radel probe style Metatron meter body (IA) 143550 - Used probe style Metatron meter body (IA) 143554 - Used Metatron meter lid cover (IA) 143557 - Used Metatron 12 defoaming chamber143560 - Used Metatron 12 power supply (IA)

~acr takeoff PartS 143450 - Rebuilt 5/8” ACR sensor, with new sight glass & diaphragm 143569 - Rebuilt ACR 2 solenoid 143575 - Rebuilt ACR 3 solenoid (IA)143595 - Rebuilt ACR SS reversing valve (IA) 143600 - Used #7053-9047-080 ACR SS board 143650 - Used #4017-2678-000 ACR SS board 143700 - Used ACR 1 board, older style 143705 - Used ACR 2 board 143709 - Used connector board for old style ACR 3 143710 - Used 24 volt AC transformers (IA)144650 - Used ribbon style board for ACR 3 or Stimopuls MA 144655 - Used newer style potted board for ACR 3 or Stimopuls MA (IA)


91835 - Toggle switch

for ACR

91831 - Push button

cover

91830 - Push button

91836 - Toggle

switch cover

91838 - Water tight toggle

switch cover

91785 - Complete replace-ment solenoid valve with stainless steel

box for ACR 1

91795 - Stainless box with

lid, ONLY

10480 - Box with front holes, ONLY

91870 - Box with switch, button and red lens assembly, ONLY

91850 - Box COMPLETE, (with replacement board)

91806 - Mounting clamp for front switch box, copy (1 required)

10310 - Box with side holes, ONLY

91871 - Box with switch, button and red lens assembly, ONLY

91851 - Box COMPLETE, (with replacement board)

91808 - Mounting clamp for side switch box, copy (2 required)

99777 - Replacement solenoid (ONLY) for ACR #1

24 volt DC

91922 - Wire connector for re-versing valve & sensor

NEW REPLACEMENT PARTS THAT FIT WESTFALIA® TAKEOFFS

STAINLESS BOXES FOR ACR#1

91800 - Replacement solenoid

valve less box

91833 - Replacement Touch Switch for

W/F

10480

{

}NEWITEM


98790 - 3/16” Nylon rope (sold per foot - roll size is 1000 ft.)91887 - 90 ° conduit elbow for ACR ss takeoff box91816 - Stainless L bracket for old style sensor mounting91245 - End cap for Stimopuls® MA cylinder.91235 - Seal for Stimopuls MA cylinder91237 - Sealing ring for Stimopuls MA91909 - Bottom mounting plate for Metatron® Apex box91910 - Swivel bracket for Metatron® Apex box91991 - Tube sealing cap for Metatron® or ACR91231 - Front cover assembly replacement for Stimopuls91230 - Front cover, ONLY

85350 - Replacement Circuit board for ACR1® takeoff, with board heater

85353 - Board heater ONLY

91196 - Fuse for ACR board, 1.6 AMP,

5mm x 20mm

91199 - Bulb for

ACR 1 board

91819 - Bulb for Metatron® 12,

ACR 2 & 3® or Stimopuls® MA

MISCELLANEOUS COPY PARTS

91235

91237

NEW ITEM

91245

91991

91231



99747 - Leather sleeve

for cylinder

91820 - Bottom for

cylinder

91863 - Top disc for piston

91865 - Piston for cylinder

91867 - Piston spring

91805 - Stainless L

shaped cylinder bracket

91807 - Mounting bracket for Metatron box

99180 - Breakaway clamp kit99185 - Silicone line gasket99177 - Spring clamp99175 - Clamp half, only

91805 - Stainless L

shaped cylinder bracket

99172- 5/8” stainless curb mount bracket

99173 - 3/4” stainless curb mount bracket

91860 - Complete stainless cylinder,

37” long

91862 - Top cap for cylinder



91980 - Service kit for Metatron® meter

Includes: 1 - 99252 - lid gasket 1 - 99185 - silicone line gasket 3 - 91991 - sealing caps 2 - 99751 - diaphragms 1 - 91970 - plunger assembly with diaphragm

91945 - Plunger

assembly for Visofl ow

sensor

91946 - Plunger only for Visofl ow

sensor99751 - Sensor or meter

diaphragm


91810 - 3” stainless milk line clamp for Visofl ow® or Metatron®, (Includes gasket)

91811 - Gasket for 3” stainless milk line clamp

91239 - Hanger for Stimopuls MA(for 2” pipe)

91970 - Plunger assembly for

Metatron® meter

91971 - Plunger only for Metatron®

meter

NEW ITEM


REBUILT SURgE® - ALL vACUUM

133185 - without

milk yield indicator

133175 - with

milk yield indicator

133800 - 2”

133806 - 2½”

133803 - 3”

MILK INLETS

ONE TOUCH

Picture as shown with a One Touch Unit attached to a Milk Inlet

PORTABLE BATTERY

UNIT Lightweight plastic design

Rechargeable Battery operation

Economical unit

Metering for a smaller operation

No electricity required

133060

PORTABLE UNIT

133170

Lightweight Plastic Design

Milk Yield Indicator

In Unit Alternating Pulsator

all suRgE onE touCH paRts aRE suBJECt to availaBlilitY


REBUILT SURgE® - ALL vACUUM

SURgE METER VSO

133480

Stand alone meter

Can be used with or without takeoffs Interchanges with most parlor style takeoffs

Stainless cylinder detaching

Economical unit

No electricity required

133120

Also available with a plastic cylinder

133150

OMNI


5/8” Optic sensor

Touch pad controls

Plastic control box

24 volt DC operation

OPTIONAL BOARDS3.2, 3.3 or 4.06 boardPlease specify upon ordering

133000

OMNI



133015


¾” Visofl ow sensor

Touch pad controls

Plastic control box



SURgE® MISC. USEd PARTS

133225 - Used Omni 3.2 board

133230 - Used Surge Omni keypad

133227 - Used Omni 3.3 board133210 - Used Omni Green

4.06 board

133295 - Rebuilt Omni solenoid assembly

133273 - Used Optic sensor body (IF AVAILABLE)

133277 - Rebuilt air shutoff for

Optic sensor 133510 - Used Surge meter head

(with new bellows)


SURgE® USEd PARTS

TAKEOFFS FOR SURGE® 133000 - Rebuilt Omni vacuum, with Optic sensor 133015 - Rebuilt Omni vacuum, with Visoflow sensor133030 - Rebuilt Omni Elite air 133060 - Rebuilt portable battery 133090 - Rebuilt Optic 500, with Optic sensor 133120 - Rebuilt VSO, with stainless cylinder 133150 - Rebuilt VSO, with plastic cylinder 133175 - Rebuilt One Touch, with milk yield, no takeoff (IA) 133185 - Rebuilt One Touch, without milk yield, no takeoff (IA) 133170 - Rebuilt One Touch, with milk yield and takeoff (IA)

TAKEOFF PARTS FOR SURGE ® ~oMni takeoff PartS 133225 - Used Omni 3.2 board 133227 - Used Omni 3.3 board 133210 - Used Omni 4.06 board, green version 133215 - Used Omni 4.06 board, black version for Visoflow (IA) 133230 - Used Omni keypad 133240 - Used complete Optic vacuum sensor (IA) 133270 - Used complete Optic air sensor (IA) 133273 - Used Optic sensor body only (IA) 133277 - Rebuilt air shutoff for Optic sensor 133295 - Rebuilt Omni solenoid assembly 133300 - Rebuilt Omni cylinder 133310 - Used Omni power supply 133330 - Used Optic 500 board 133360 - Used Optic 500 power supply 133375 - Used Optic 500 solenoid assembly

~VSo takeoff PartS 133390 - Rebuilt stainless VSO cylinder 133420 - Rebuilt plastic VSO cylinder 133425 - Used VSO sensor base (IA) 133427 - Used VSO sensor float (IA) 133440 - Used VSO sensor assembly

~one touch 133800 - 2” milk inlet 133806 - 2½” milk inlet133803 - 3” milk inlet

METERS FOR SURGE® 133480 - Used complete electronic meter 133510 - Used meter head only 133518 - Used glass for meter 133540 - Used butterfat sampler for meter #47213 133570 - Used yellow power cord for meter 133630 - Used power supply for meter 133660 - Used feed identifcation module 133720 - Used meter control module 133750 - Used multi function module (IA)


92243 - Bushing only for plastic VSO® cylinder bottom98789 - 1/4” Nylon rope (sold per foot)92183 - Push button cover for meter reset switch92107 - Stainless hose clamp for One Touch milk valve92209 - Mac valve solenoid, for Optic® 850 takeoff - 12 VDC92232 - Chain stop

91805 - Stainless L shaped bracket for

Omni® and stainless VSO® cylinders

92264 - Stainless L shaped bracket for plastic VSO®

cylinder

99732 - Large O-ring for mounting bracket99737 - Small O-rings for top (Pkg. of 10)99739 - White tefl on washer64589 - Replacement gasket64610 - Insert nuts (Pkg. of 12)

64512 - Screws (Pkg. of 12) 99731 - Rubber rebuild kit...... Includes: #99737 - Small O-ring #99732 - Large O-ring #64589 - Gasket #99739 - Tefl on washer

92282 - Piston seal for

Omni® and stainless VSO®

cylinder

NEW REPLACEMENT PARTS FOR SURgE® TAKEOFFS

92241 - Cylinder

bottom for Omni® vacuum

and stainless VSO®

92242 - Cylinder

bottom with

bushings for plastic

VSO®

vSO PARTS

MISCELLANEOUS REPLACEMENT PARTS

99733 - Plunger for

VSO fl oat

99730 - cap & stem for VSO fl oat

92209

NEW ITEMS

99738 - Radel base for

VSO

99736 - Radel VSO

top, with brass

inserts

92232


92208 - Mac valve solenoid for Omni®

air takeoff - 24 VDC

92245 - Stainless

sensor holder for Optic

sensor

92275 - Rebuild

kit for Optic sensor

92205 - Air cylinder

92210 - Mac valve solenoid - 24 VDC

92221 - Milk valve button92220 - Detach valve button92222 - Manual/Auto switch

92227 - Air electric switch

PARTS FOR OMNI ELITE

NEW REPLACEMENT PARTS FOR SURgE® TAKEOFFS

92000 - Bushing kit for Surge Omni Elite arm92010 - Bushing and ring for Surge Omni Elite arm92230 - Chain pad for Omni Elite® 92260 - Stainless chain for Omni Elite®, 60”92252 - Bulb for Omni Power supply92287 - 10 - 32” nylon screw for Omni® solenoid cover92294 - Small cord grip for Omni® box

MISCELLANEOUS OMNI® REPLACEMENT PARTS

43105 - Rebuild kit for Omni® vacuum solenoid

92325 - Replacement keypad cover for Omni®


“NEW” SENSOR INTERFACE BOARd

FOR OMNI® TAKEOFF

Adapts Visofl ow style sensor to older Omni® boards

Sensing range (30-ohms to 5030-ohms)

Keep your existing Omni® takeoff’s and upgrade them to a new sensor at an affordable cost (AS SHOWN IN THE PICTURE TO THE RIGHT)

This board adapts to most ring style sensors

92279 - Complete sensor Interface assembly with board, box & bracket

92280 - Sensor Interface board, ONLY

for Omni® takeoff

“NEW”SENSOR INTERFACE BOARdSENSOR INTERFACE BOARd

TAKEOFF

boards

takeoff’s and upgrade them to a

AS SHOWN IN THE PICTURE TO THE RIGHT)

- Complete sensor Interface assembly with board, box & bracket

- Sensor Interface

takeoff


WAIKATO® TAKEOFF PARTS94200 - Sensor body94204 - Cover for valve head94205 - Valve head94220 - Float94222 - Sensor Bracket for Waikato Takeoff94221 - Bridle Clip for Waikato Sensor94207 - Timer lever with bung94208 - Float lever with bung94212 - Bung only94218 - Piston washer94216 - Bayonett with pulley for cylinder99708 - Cylinder seal.......................................................94225 - Reset timer94235 - Milk Line fi lter94237 - Screen for milk line fi lter94240 - Complete sensor assembly94250 - Complete parlor takeoff with sensor

REBUILT WAIKATO® - ALL vACUUM

PORTABLE

Economical Unit

Light weight plastic design No Electricity Required

Float style sensor

197000 197020

PARLOR

Economical Unit

No Electricity Required

Float style sensor


PORTABLE AdvISOR

PORTABLEATO

173300

173025

Plastic vacuum cylinder detaching

Milk fl ow indicator


Pulsator is included

Please specify ratio


On board pulsation

Displays milk yield

Elapsed time


suBJECt toavailaBlilitY

REBUILT UNIvERSAL® - STALLBARN

PORTABLEECO LITE




In Unit Alternating Pulsator

173100


RETRAC

PARLOR AdvISORWITH MILK METERINg

RETRAC PLUS

173150

Stainless steel cylinder

5/8” elbow type sensor



Optional:Plastic cylinder

Stainless steel cylinder

Economical milk metering unit


On board pulsation

Displays milk yield, elapsed time

“Disable feature”

Optional:Plastic cylinder

173125

173200

Plastic cylinder

Economical unit


Optional:Stainless steel cylinder

173050

PARLOR ECO

Plastic cylinder

5/8” elbow type sensor



“Disable” feature

Optional:Stainless steel cylinder

REBUILT UNIvERSAL® - ALL vACUUM


UNIvERSAL® MISC. USEd PARTS

173345 - Used Retrac board

173400 - Used ATO board

173500 - Used white sensor for

ATO, Retrac and Retrac

Plus

173350 - Used Retrac

Plus board

173650 - Used parlor Advisor sensor

173600 - Used Parlor ECO sensor(Please specify right hand or left hand upon

ordering)


UNIvERSAL® USEd PARTSTAKEOFFS FOR UNIVERSAL® 173125 - Rebuilt parlor Advisor173025 - Rebuilt portable Advisor (RA)173050 - Rebuilt parlor ECO 173100 - Rebuilt portable ECO lite 173150 - Rebuilt Retrac 173200 - Rebuilt Retrac Plus 173250 - Rebuilt parlor ATO (IA) 173300 - Rebuilt portable ATO

TAKEOFF PARTS FOR UNIVERSAL®

173315 - Rebuilt stainless cylinder 173325 - Rebuilt plastic cylinder 173345 - Used Retrac board 173350 - Used Retrac plus board 173360 - Used Retrac solenoid 173400 - Used ATO board 173450 - Used complete ATO solenoid 173500 - Used white sensor for ATO, Retrac and Retrac Plus 173600 - Used parlor ECO sensor 173610 - Used parlor ECO solenoid 173650 - Used parlor Advisor sensor 173660 - Used parlor Advisor solenoid 173675 - Used portable/parlor Advisor board (IA) 173695 - Used 24 volt transformer #313574 (IA) 173698 - Used 24 volt transformer #313593 (IA) 174300 - Used 24 volt transformer #313370 (IA)

92404 - Manuel/ Auto switch for PATO®

92407 - Attach/Detach switch for PATO®

NEW REPLACEMENT PARTS FOR UNIvERSAL®

92411 - Rope guide for 3”

stainless cylinder

99708 - Seal for plastic style cylinder

92400 - Sensor/shutoff diaphragm,

with pin

98669 - Seal for ECO and Advisor sensors92406- Parlor Advisor & Eco

sensor bracket


HEAVY-DUTY STAINLESS STEEL - DESIGNED FOR YEARS OF USE.HEAVY-DUTY STAINLESS STEEL - DESIGNED FOR YEARS OF USE.This Swirl Design Sensor/Shutoff is patented by Interpuls®.

The milk enters sensor and is swirled around shutoff plunger to the outlet side resulting in faster passage and less milk

restriction. Sensor accepts either 5/8” or 3/4” hose.

Unit will adapt to most new or existing parlor systems.

Built in heater to reduce condensation.

Optional Accumulative vs Standard strip time via an “on board shunt”. Accumulative: In 10 second strip mode, accumulates total of 10 seconds of no milk fl ow before detaching. Standard: In 10 second strip mode, requires 10 consecutive seconds of no milk fl ow before detaching.

Power requirements: 24VAC, 25 WATTS We recommend our #61554 transformer, it is ideal for areas with “AC Brownout” when voltage may be higher or lower than normal.

NEW - KLEEN-FLO® TAKEOFFNEW - KLEEN-FLO® TAKEOFF

** The starting points mentioned below are are only suggested. Other ranges may be used at the customer’s discretion.

If you experience diffi culties, please contact Joe @ 800-768-6166 for assistance.

91725 - Complete takeoff unit, with 98721 DL style stainless cylinder and Interpuls® swirl sensor91715 - Takeoff unit, less sensor with 98721 DL style stainless cylinder 91737 - Complete takeoff unit, with 91860 WF style stainless cylinder and Interpuls® swirl sensor91735 - Takeoff unit, less sensor with 91860 WF style stainless cylinder

PARTS FOR KLEEN FLO TAKEOFF91710 - Dip switch style takeoff board91750 - Interpuls® sensor assembly 91763 - Kleen Flo sensor mounting bracket91755 - Sensor top cap91757 - Sensor/shutoff diaphragm91785 - 420 line mount solenoid valve, with stainless enclosure91800 - 420 line mount solenoid valve, less stainless enclosure

FOR CUSTOM PACKAGES CALL JOE @ 1-800-768-6166

Kleen-Flo #91710 Dip Switch Style Takeoff Board Sensitivity Settings

** Suggested Starting Range for Different OEM Type Sensors

Dip Switch #1 Dip Switch #2

SW1-1 SW1-2 SW2-1 SW2-2 Sensitivity Range

ON ON OFF ON 30 TO 500 OHMS

ON ON ON ON 50 TO 550 OHMS

ON OFF ON OFF 150 TO 650 OHMS Westfalia VisiFlo

ON OFF OFF ON 350 TO 850 OHMS

ON OFF ON ON 400 TO 900 OHMS

OFF ON OFF 1250 TO 1750 OHMS Delaval HFC ON

OFF ON 1450 TO 1950 OHMS Interpuls Swirl Type OFF ON

O O ON ON 1500 TO 2000 OHMS FF N


NEW - NUPULSE® TAKEOFFSNEW - NUPULSE® TAKEOFFS

Meter has 3/4” inlet and outlet

Flow through electronic meter with no moving parts

420 Line mount solenoid valve

Inline shutoff

This meter can be interfaced with existing takeoffs

M15700NP

FLOCHEK PARLOR

TAKEOFF/METER

70400NP

PROCHEK PARLOR

TAKEOFF/METER Meter has 3/4” inlet and outlet

Flow through electronic meter with no moving parts

420 Box mount so-lenoid valve

Inline shutoff

This meter can be interfaced with existing takeoffs

The FloChek parlor milk meter provides a digital

readout along with an End-of-milk

signal. The meter can be calibrated

and shows the accumlated milk

weight. The meter also has a milking total selection key, and can show the

flow rate per minute. Weight can be shown in

either kilograms or pounds.

The ProChek meter and

automatic takeoff has advanced

communication circuitry for

integrating an automatic in-parlor

I.D. system. The ProChek can also be interfaced

with existing automatic takeoffs.

18500NP - Constant voltage transformer. This CVT can handles

up to 10 units at a time.

18500NP - Constant voltage transformer. This CVT can handles

up to 10 units at a time.


99881 - Kleen Flo Vacuum SenSor aSSembly, ¾”

Top 2 Rings for BoumaticOHM Range 1000-2000

Middle 2 Rings for DelavalOHM Range 1250-1750

Bottom 2 Rings for WestfaliaOHM Range 150-650

99882 - Kleen Flo air SenSor aSSembly, ¾”




99881 - Vacuum plastic sensor assembly , 3/4”

99882 - Air plastic sensor assembly , 3/4”

MISCELLANEOUS TAKEOFF PARTS


99880 - Kleen Flo SenSor only




99880 - Plastic sensor only

dECAdE BOXES

99722 - Dual dial decade box, 0 to 11,000 OHMS

99711 - Single dial decade box, 0 to 1,000 OHMS



96030 - Stainless chain. This is a top quality, heavy duty, stainless steel chain as each link is welded all the way around.

This chain is sold per foot but available at any length.


ACME® TRANSFORMERSThese 500 Watt - .500 KVA transformers come

with a breaker switch installed but are available without if requested.

98782 - Large stainless

repair link

96088 - Heavy

duty stain-less snap,

9/32”96014

- Small stainless repair link

QUANTITY dISCOUNTS AvAILABLE

96087- Breakaway stainless clip

61554 - 24-28 VAC Output(One of these supplies enough power for up to 20 Kleen Flo takeoff units)

61594 - 24-28 VDC Output(This transformer is suited for the #92280 Sensor Interface board)

PARTS FOR TRANSFORMERS

99717 - Toggle switch for 24 volt

transformer, (on/off)92592 - 20 AMP

breaker switch92590 - 30 AMP

breaker switch

96012 - Standard stainless

snap, 1/4”

92422 - 2 pin terminal92424 - 4 pin terminal92425 - 5 pin terminal

92426 - 6 pin terminal92428 - 8 pin terminal 92430 - 10 pin terminal

TERMINALS FOR

CIRCUIT BOARdS

78490 - Normally Closed ~ Vacuum operated milk line shutoff. Can be used with 5/8” or 3/4” milk hose

vACUUM OPERATEd MILK LINE SHUTOFF

78491 - Solenoid adaptor nipple78492 - 3/16” x 12” Hose78493 - Cover99751 - Replacement clear diaphragm for shutoff

78475 - Vacuum operated stainless

steel pinch valve

78476 - Diaphragm only for pinch

valve

KLEEN FLO TRANSFORMERSTHESE 500 WATT - .500 KVA TRANSFORMERS ARE IDEAL FOR AC “BROWNOUT” AREAS WHERE VOLTAGE MAY BE LOWER OR

HIGHER THAN NORMAL. MULTIPLE PRIMARY TAPS ACCEPT 95VAC, 105VAC, 115VAC OR 125VAC. CAN ALSO BE USED IN CASES

WHERE THERE IS A GREATER THAN NORMAL SECONDARY WIRE LENGTH BETWEEN TRANSFORMER AND APPLICATION.

To convert to normally closed on the Boumatic® 3000 series takeoffs, take

the plug out of the solenoid and replace it with #78491 solenoid adaptor nipple and order whatever length of #78492

hose that you will need.

99718 - 12 volt - 30 AMP Breaker

AC or DC

99716 - 24 volt - 20 AMP breaker

AC or DCOn/Off toggle switch


91745 - Label for Kleen-Flo®

REPLACEMENT TAKEOFF LABELS

92375 - Label for

Advisor

91826 - Label for Metatron® #12

plastic style cover

91824 - Label for Stimopuls®

MA

99760 - Label for MilkMaster

99625 - Label for

2101D

99811 - Label

for 2000V

91828 - Label for ACR® #3

99646 - Label for

3000D

- Label for

99811 - Label

for 2000V

99643 -Label for

3000M and 2101M

99812 - Label

for 2100D

99812 - Label

2100D

3000M and

91821 - Label for ACR SS

91822 - Label for ACR SS

99640 - Label

for 2000VM

99640 - Label

for 4600 D


After completing this order form please Fax or Email. An order confi mation will be sent if you provide us with a return fax number or email address.

ORDER FORM

Fax: 717-768-7586 E-Mail: [email protected]

Orders under $35.00 are subject to a $5.00 handling charge

Company Name:_______________________________Address:_____________________________________City:________________________________________State/Province:___________ZIP/Postal Code:_______Contact Person________________________________Phone___________________Fax:_________________Email:_______________________________________Ship Via:_____________________________________

P.O. Number___________________ Date_______________________ (Check here if shipping is same as billing )

Ship To:_____________________________________

Address:_____________________________________

City:________________________________________

State/Province____________ZIP/Postal Code_______

Phone___________________Fax:________________

MilkinG eQuiPMent llc~ TAKEOFF DIVISION ~

3910 East Newport Road * Gordonville, PA 17529Toll Free: 1-800-768-6166 * Phone 717-768-0157 * Fax 717-768-7586

E-Mail: [email protected]

quantitY paRt nuMBER DEsCRiption pRiCE total

oRDER totalNOTE: Shipping charges will be applied when order is processed.

~new ~ used ~ rebuilt~ - e-zee milking equipment home … takeoff catalogl.pdf2 1-800-768-6166 e-zee...

Documents