new resume

4
Ranjan Kumar Singh C/246, Bilashpur Camp , Molarband , Badarpur-110044 Email : [email protected] , Mobile: +91-9873244979 CAREER OBJECTIVE To work in a firm with a professional work driven environment where I can apply and utilize my knowledge and Skills which would enable me as a fresh graduate to grow while fulfilling organizational goals. EDUCATION 1.) GyanVihar School of Engg& Technology, Jaipur (2013-2014) M.Tech. (V.L.S.I) (76.65%) 2.) GyanVihar School of Engg& Technology, Jaipur (2009-2013) B.Tech (Electronics & communication) (70.58%) 3.) N.I.O.S (New Delhi) (2008) S.S.S.E (Science) (63%) 4.) K.S.High School Tamuria (Madhubani) (2005) 10 th , Board S.S.E (68%) WORK EXPERIENCE Company: Electronics Corporation Of India Duration: Still working from 12 th Feb. 2015. Job Profile: Engineer Consultant.

Upload: ranjan-kumar-singh

Post on 16-Apr-2017

117 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: new resume

Ranjan Kumar Singh C/246, Bilashpur Camp , Molarband , Badarpur-110044

Email : [email protected], Mobile: +91-9873244979

CAREER OBJECTIVE

To work in a firm with a professional work driven environment where I can apply and utilize my knowledge

and Skills which would enable me as a fresh graduate to grow while fulfilling organizational goals.

EDUCATION

1.) GyanVihar School of Engg& Technology, Jaipur (2013-2014)

M.Tech. (V.L.S.I) (76.65%)

2.) GyanVihar School of Engg& Technology, Jaipur (2009-2013)

B.Tech (Electronics & communication) (70.58%)

3.) N.I.O.S (New Delhi) (2008)

S.S.S.E (Science) (63%)

4.) K.S.High School Tamuria (Madhubani) (2005)

10th, Board S.S.E (68%)

WORK EXPERIENCE

Company: Electronics Corporation Of India Duration: Still working from 12th Feb. 2015. Job Profile: Engineer Consultant.

PROJECTS IN B.TECH

1. People Counter: This is our minor project. The circuit of “people counter” consists of two seven segment display, two IC4033, a set-reset switch, two resisters are used with the IC and fourteen resisters are used with the seven segment display.The seven segment display is set at zero by set-reset switch and the whole circuit is placed at the wall of the entrance. At the opposite side of the circuit the laser light is placed, as soon as any person enters the path of the laser light to the LDR at the circuit is blocked and the counting starts.Each seven segment IC is connected to one seven segment display in which input is provided at the 1stpin of each IC, and the output is obtained at the fifth pin of each IC.The LDR is connected at the clock input of first IC, connected between pin1 and pin2 for triggering. The output from the fifth pin of the first IC is connected to the input pin of the second IC and as soon as input is applied at the first pin of IC one then counting from 0 to 9 is done by the seven segment display.

1. Done an M.Tech. research on topic “ Implementation and Analysis of Power Reduction in 2 to 4 Decoder Design using Adiabatic Logic” and published in IJRET journal, Volume 3, Issue 7, Jul 2014

PROJECTS IN M.TECH

Page 2: new resume

Place: New Delhi